Bluetooth Barcode Scanner User Manual V:BT15

Performance Comfortable and convenient to use Long life time button--3 million times Built-in chargeable lithium battery Strong decoding capability Suitable for IOS, Android, Windows 7, Windows 8, and Windows XP Bluetooth Barcode Scanner Knowledge Bluetooth barcode scanner is used for paring with the devices like smart phones, tablet PC, etc. It is suitable for IOS, Android, Windows 7, Windows 8, and Windows XP systems. With the high-performance processor and decoder, it has a rapid decoding and high precision reading ability. Bluetooth barcode scanner is developed to meet the needs of the changing world. Packing list 1*Bluetooth barcode scanner; 1*charging cable; 1*charger (optional); 1*Bluetooth adapter; 1*user manual Housing Design Description indicator light Warning: 1. Please pull out the power supply and cable from the scanner in stormy weather to avoid damaging. 2. Keep away from heat and maintain ventilation. 3. Keep away from water in the environment of storage, trigger button transportation and operation. 4. Please use the original Bluetooth adapter of the device. shock resistance cover Bluetooth adapter The Bluetooth adapter is used when the device has no Bluetooth function, for example, the desktop computer. If the device has Bluetooth function, the scanner can pair with the device directly without the adapter. For more details, please check the Bluetooth Adapter Installation Guide on page 2 to 3. Technology Parameters Physical Parameters Size: 165mm*70mm*98mm Weight: 300g Charging interface: RJ-45 plug, 2 meters (with 5V charger, red light for charging, green light for battery charged) Housing material: ABS+PC Performance Parameters Light source: visible laser diode, wave length 650nm Trigger mode: manual (long press the button to turn off the scanner) Scanning mode: single line scanning Scanning speed: 150±2 scans/sec Resolution: 4mil Error rate: 1/50million Scanning resolution: minimum 30% contrast Transmit frequency: 2.4G Bluetooth Transmit distance: visible distance 10m (customized) 1

Depth of scanning field: 5mm-630mm Scanning angle: ±60 ±65 ±42 Decoding capability: UPC/EAN/JAN, code 11, code 128, code 39, Chinese 2 of 5, Interleaved 2/5, Interleaved 2of 5, China post code, etc. Prompt mode: beeper& LED Setup mode: manual (scan the setting barcodes) Laser safety level: EN60825-1, Class 1, National Class 1 Laser Safety Standard EMC EMC: EN55022, En55024 Electric safety: EN60950-1 Electrical Parameters Charging time: 2 hours Charging voltage: DC5V±5% Power: 100MW (operation), 500MW (maximum) Currency: 20MA (operation), 100MA (maximum) Standby currency: <20uA Environmental Parameters Light intensity: 3000-12000LUX Temperature: 0-50 (operation mode);-40-60 (storage) Package level: IP 52 Shock resistance: design to fall from 2 meters height from concrete surface How to Use Power On Press the button. The scanner will beep two times and indicator light is on. Power Off Press the button for 5 seconds. The indicator light is off. Set Into Paring Mode Press the trigger button for 10 seconds or scan the setup bar code below. scan and match Bluetooth Adapter Installation Guide-Windows XP 1. Plug in the Bluetooth adapter. Bluetooth device icon will show on the system tray. 2. Double click the Bluetooth icon then the Bluetooth device dialog box will show. (User can also click the Bluetooth device from the control panel.) 3. Click add and the Bluetooth device wizard will show. 4. Scan the setup code scan and match or press the trigger button for 10 seconds in order to let the Bluetooth scanner get into matching condition. The LED light flashes quickly. Select My device is set up and ready to be found and click next. 5. There will be a Bluetooth device wizard dialog box that shows General Bluetooth HID Barcode Scanner icon. If not, click search again. 6. Double click General Bluetooth HID Barcode Scanner icon and see the passkey dialog box. 7. Select don t use a passkey and click next to start installing the driver. 8. After installation, there will be an extra General Bluetooth HID Barcode Scanner in the Bluetooth device and an extra HID Keyboard Device in the device manager. The Bluetooth adapter installation is finished now. 9. Now open any edit box like notepad to start reading and uploading bar codes. Bluetooth Adapter Installation Guide-Windows 7 1.Plug in the Bluetooth adapter then the Bluetooth icon will show. 2.Double click the Bluetooth icon and then the Devices and Printers will show. 3.Activate the scanner and scan the setup code scan and match or press the trigger button for 10 seconds, then LED light flashes quickly and the Bluetooth scanner enters to the matching condition. 4.Click add a device and there comes a dialog box that shows General Bluetooth HID Barcode Scanner. 5.Right click the device icon and right click again to select the properties. 6.Select Drivers for keyboard, mice, etc [HID] in the properties dialog box and click yes. 7.After installation there will be a balloon to show installation success. The device manager has a new HID keyboard device. 8.Now the Bluetooth installation finished. Open any edit box like notepad to start reading and uploading bar codes. Bluetooth Adapter Installation Guide-Windows 8 1.Plug in the Bluetooth adapter. 2.Open control panel and click add a device. 3.Activate the scanner and scan the setup code scan and match or press the trigger button for 10 seconds, then LED light flashes quickly and the Bluetooth scanner enters to the matching condition. 4.Click add a device and there comes a dialog box that shows General Bluetooth HID Barcode Scanner. Select the device and click next. 5.Now the Bluetooth installation finished. Open any edit box like notepad to start reading and uploading bar codes. Paired with Android/IOS Devices 1. Please confirm the scanner is in paring mode. Otherwise, the device can t search the scanner. 2.Click the searched bluetooth device directly,it can finish the pairing automatically 2 3

Charging Please connect the RJ45 interface of the charging cable to the bottom of the scanner and the USB interface to the computer. Or, connect the charger to the power socket. Charging time will be 2-3 hours. After fully charged, the scanner can work 8-12 hours continuously. Reading Angle Maintain a bevel between the scanner and the barcode to make a best reading. Do not keep the scanner in 90 with the barcode, otherwise the scanner can't read. The scanner must aim at the barcode and the beam must cover the whole barcode. If don't, error maybe occur. LED Indicator & Beeper Indicator Light Color Blue light and will be off soon Beep Sound A short beep A long beep Double short beep Three long beep Instruction a short beep when reading successfully Instruction read a code successfully low voltage and please connect the charger to charge turn on the scanner fail to upload data and need to pair again correct way of reading incorrect way of reading correct way of reading incorrect way of reading Notice: 1.The Bluetooth barcode scanner has been set well before delivery. It can be used directly. Please do not scan the barcodes in the manual optionally to test the scanner. In case of scanning the setting barcodes and abnormal condition occurs, please scan the Initialization Setting barcode and Serial Mode barcode in the manual to reset the scanner to the default settings. 2.Please connect the Bluetooth adapter to the fixed computer USB interface. Do not plug in or pull out the adapter frequently in order to help improving the working efficiency and avoid man-made damage. Scanning Mode Setup Setup Instruction: 1.Normal mode means real-time transmission. Scan 'Normal Mode' bar code, the scanner will be in real-time transmission. 2.In inventory mode, the scanner will save the bar code it reads. When need to upload the data to computer, scan 'Data Upload' bar code. 3.Scan 'Total Number of Data' bar code, the computer will show how many bar codes the scanner reads under inventory mode. 4.Scan 'clear data' bar code means clear all the bar codes being read under inventory mode. Inventory Mode Normal Mode Non-volatile Mode Initialization Setting Serial Mode Upload Data Total Number of Data Clear Data (scan with caution) 4 5

Sleep Time Setting Setup Instruction: 1. Scan Sleep Time bar code. 2. Scan the time you want to set. France Italy Sleep Time Span RF Reliability Russia 20 seconds 30 seconds 60 seconds 2 minutes on Bluetooth Transmit Speed Control off (default) 5 minutes 10 minutes Low Speed High Speed (default) Shutdown/Default value/version information 20 minutes no sleep Dongle Mode Selection Shutdown Default value HID keyboard mode (default) simulate serial mode Software Version Hardware Version Bluetooth Mode Selection Function Settings Reading Mode HID mode (default) Language Selection (Bluetooth Module) SPP mode Single scan Single scan no trigger Multiscan Multiscan no trigger America (default) Germany 6 7

Terminations String Setup Bar Codes Auto continuous scan Pulse Image Cancel suffix Decode options reverse image-enable Add Bar Code ID (Bar Code Identifying Code) Decode options reverse image-disable Termination CHAR-CR Add ID code in front-enable Add ID code in front-disable Termination CHAR-space Add ID code behind-enable Add ID code behind-disable Language Selection (Decoding Board) Termination CHAR-TAB America Germany Termination CHAR-TAB/CR France Reset Edit Setup Bar Codes Termination CHAR-CR+CR Capital Lower case All codes preamble-stx Reset 8 9

Code 39 All codes postamble-etx Code 39/on Code 39/off Hide the first character Code 39 ALL ASCII-on Code 39 ALL ASCII-off Hide the last character Barcode Setting Code 11 Guide character - None Guide character + Code 11 /on Code 11/ off Send start/stop CHARS - enable Send start/stop CHARS - disable ID Character m ID Character a Code 11 redundancy enable Code 93 Code 11 redundancy disable Code 39 redundancy enable Code 39 redundancy disable Code 128 Code 93 /on Code 93 /off Code 128 /on Code 128/off ID Character h ID Character g ID Character z Code 93 redundancy enable Code 93 redundancy disable 10 11

Code 128 redundancy enable Code 128 redundancy disable ITF25 redundancy enable ITF25 redundancy disable CODABAR Industrial 25 CODABAR/on CODABAR/off Industrial 25/on Industrial 25/off Send start/stop CHARS - enable Send start/stop CHARS - disable ID Character k ID Character k Industrial 25 redundancy enable Industrial 25 redundancy disable MSI/PLESSEY CODABAR redundancy enable CODABAR redundancy disable MSI-on MSI-off Bar width gap allowed- enable Bar width gap allowed - disable ID Character f Interleaved/ITF25 MSI redundancy enable MSI redundancy disable Interleaved/ITF25-on Interleaved/ITF25-off UPC-A ID Character I UPC-A/on UPC-A/off 12 13

EAN-13 Convert UPC-A into EAN13 enable Convert UPC-A into EAN13 disable EAN-13/on EAN-13/off Transmit system bit enable Transmit system bit disable Convert EAN-13 into ISBN enable Convert EAN-13 into ISBN disable Transmit check digit enable Transmit check digit disable Transmit system bit enable Transmit system bit disable ID Character b Transmit check digit enable Transmit check digit disable UPC-E ID Character e UPC-E/on UPC-E/off EAN-8 Convert UPC-E into UPC-A enable Convert UPC-E into UPC-A disable EAN-8/on EAN-8/off Transmit system bit enable Transmit system bit disable Transmit system bit enable Transmit system bit disable Transmit check digit enable Transmit check digit disable Transmit check digit enable Transmit check digit disable ID Character C ID Character d 14 15

ISBN ISBN/on ISBN/off ID Character f UPC/EAN UPC/EAN supplements disable UPC/EAN supplements- 2 digits UPC/EAN supplements- 5 digits UPC/EAN supplements- 2&5 digits UPC/EAN redundancy enable UPC/EAN redundancy disable Code 32 CODE 32/on CODE 32/off 16 17