TUR 800/930/1100 MN series lathes. Exceptional stability with high precision and unrivalled quality, FAT lathes will provide many years of reliable service for your business. The best combination of price and high efficiency your most cost effective solution. We are confident there is no better choice for your work shop on the market today! TUR 800/930/1100 MN is a high precision, high quality European product 100% manufactured in Poland. The purchased parts used in all our products only come from world leaders in machine tools parts manufacture and supply. The high level of standard equipment makes the TUR MN lathe a powerful tool which will increase the capacity of your work shop from the first day of operation! A large range of easy to install options will fulfil any special requirements. Special housing of rear spindle nose integrated with additional chip conveyer Hydraulic chuck Second spindle nose The headstock, made of one mono-block casting, is located on hardened and ground bed guide ways. Hand scraped contact surfaces ensure the best fit and durable alignment. High precision spindle bearings guarantee excellent stability and accuracy when machining. Pneumatic chuck does not reduce spindle bore
Optional executions: Quill operated both manually and hydraulically The standard 125 diameter tailstock quill diameter is located in a special extended body which increases machining range whilst keeping high rigidity. The quill diameter can be increased up to 140 or 10 for heavy duty machining. The bearing system for the quill is prepared for mounting the dead centre MT5 or MT and is available as an additional option. Quill operated hydraulically HD Tailstock with 10 Quill diameter for increased rigidity and load capacity Turret for static tools Combination of two 4-position horizontal Sauter turrets Full contouring C axis with independent, direct drive for spindle enables precise milling for interpolating machined work pieces Sauter turret for driven tools with options for C-axis spindle positioning: indexing every 2,5 degrees driven by main motor in combination with hydraulic brake and spindle encoder full contouring C-axis driven directly by separate servo motor Hydraulic brake with spindle encoder ensures very accurate positioning of C axis when working with driven tools Standard Multifix D1 toolpost Parat toolpost with optional Capto seat
OPTIONAL EQUIPMENT Milling-drilling unit mounted at the rear of the cross slide or an additional independently driven carriage (U-axis) Oil mist collector Milling-drilling unit Deep hole boring version: Boring tool held in spindle (rotating) and work piece is stationary. TUR 4 SMN version has special step bed design with additional guide ways. They permit tool to move along the whole machining length without collision with steady rests.
HD Boring bar attachment mounted on carriage with RH rail 4 position Sauter turret and milling unit WTO system enables drilling and milling operations at a high torque on tool spindle. Normal turning is still possible. Available version with Y-axis: shown for VDI 50 tooling Additional coolant tank with filtration and high pressure pump A wide range of steadies and rests is available to suit different machining applications, including: manual and hydraulic- self centring, steady or follow rests, C-form, ring rests and other.
MACHINE STANDARD EQUIPMENT CNC Siemens 840D SL Brushless AC servo motors Toolpost type Multifix Size D1 Tube lights (24V) in working area Complete coolant system Hydraulic aggregate Independent Z position operator panel Come-along system quick coupling between tailstock and carriage Emergency switch between tailstock and carriage X and Z axis absolute encoders Full rear guarding with sliding access doors Front double door, electrically secured Hand wheels for manual operation Automatic lubrication system Automatic gear change USB Port Absolute encoders Wide 22 / 24.5 bed with deep induction hardened and ground guide ways. Special design of massive 3-V ways is ideal for higher accuracy turning and boring applications. MACHINE OPTIONAL EQUIPMENT Various sizes of spindle bore: 220, 320, 30, 450 and other Rotating operator panel Manual steady and follow rests Hydraulic steady and follow rests Various types of chucks: manual pneumatic hydraulic with or without through hole T-slots face plate Disc type tool turret for static and driven tools 4-position head type turret Parat toolpost NC controlled C, Y, U axes Special milling-drilling systems Grinding unit Extra heavy-duty headstock version Bigger tailstock quill diameter with bearing system Hydraulic tailstock quill Chip conveyor Linear scale direct measuring system for Z- and X-axis Boring bar attachment Stronger spindle motor 37/5 kw Coolant station with filter and high pressure pomp Oil mist collector Other turning lengths Other turning diameters Other special equipment on request Wrzeciono z przelotem 450 i podwójnym nosem Essential features: Uchwyt hydrauliczny easy prograing using graphics and without need for knowledge of DIN/ISO extremely short prograing time clear display of all data in machining sequence prevention of invalid inputs thanks to dynamic online graphics simple management of tools wide range of standard machining and measuring cycles Surprisingly easy prograing! TUR MN with Siemens 840D SL allows you to work manually, semi-automatic or full CNC. The user friendly Siemens Shop Turn Conversational Prograing System will make your work efficient and enjoyable. Uchwyt specjalny Szczęki specjalne - opasające ze zintegrowanym kłem Fanuc or Fagor controller as an option
SPECIFICATIONS TUR 800 MN TUR 930 MN TUR 1100 MN WORKING RANGE Distance between centres 2.000-3.000-4.000-5.000 -.000-8.000-10.000. Other lengths for request Swing over bed 800 950 1100 Swing over saddle 500 30 790 Max. weight between centres (without steadies) Optional increased weight between centers kg 4.000 8.000 4.000 8.000 4.000 8.000 Max. weight in chuck only Optional increased load capacity kg 1.000 2.000 1.000 2.000 1.000 2.000 rpm I: 4 30, II: 200-1.800 I: 4-300 II: 10-1.200 I: 4-300 II: 10-1.200 kw (S) 33 5 33 5 33 5 Nm 4.100.200 4.900.200 4.900.200 DIN55029 D1-11 D1-11 D1-11 Spindle bore 140 140 140 Front spindle bearing diameter 250 250 250 Enlarged spindle bore * 220 320 30 450 DIN 5502 A2-15 A2-20 A2-20 A2-28 Max. spindle speed rpm 700 500 350 300 Max. turning torque Nm 4.900 4.900.200.200 HEADSTOCK Spindle speed, auto shifting, 2 ranges Main drive motor power Optional stronger main motor Max. turning torque Optional Spindle nose Camlock Spindle nose SADDLE Rapid travel Z-axis m/min Rapid travel X-axis m/min Cross slide travel X-axis 505 570 10 Feed force transverse kn 15 15 15 Feed force longitudinal kn 20 20 20 Ball screw Z-axis Ball screw X-axis 40 40 40 Length of carriage 810 810 810 Width of cross slide 30 30 30 Quill diameter 125 (140/10 option) 125 (140/10 option) 125 (140/10 option) Quill taper size Quill stroke 300 300 300 Width of bed 22 22 22 Width of lathe** 2.0 2.800 2.90 Height of lathe 2.000 2.100 2.250 3 length over.000 - rack and pinion TAILSTOCK MT (MT5 with bearing system) CAPACITY LATHE LENGTH Machining length 2.000 / 3.000 / 4.000 / 5.000 /.000 * Not available for 800MN size ** For transport the lathe fit to the standard truck and container. Subject to alterations without prior notice. 4.400 / 5.400 /.400 / 7.400 / 8.400
SHORT HISTORY OF FAT-HACO FAT Haco offers you the benefit of our vast experience since the year 1945 over 50.000 machine tools have been sold in many countries around the world! Excellently equipped machine shop, assembly facility, research office and our own foundry allow us to manufacture most components by ourselves complete from casting to finished product. FAT works closely with you to develop the absolute best product for your needs. Our experience and quick reaction time will save you both time and money. Together, let s make creative imagination our only limitation! 189: 190: foundation as a Locksmith Company metal work company of Gustav Trelenberg for production of steel construction for the builiding industry, railways, trams and industrial locomotives. 1945: 1992: production of simple planing machines, saws and drills, later specializing in manufacturing horizontal lathes: TUC40, TUD40/50/3, TUR50/3 which were very well known in Poland and overseas markets. delivered the 50.000 th machine tool made by FAT 1995: expanded the range of lathes to include universal lathes TUR 50/30/710, TUR 50/3/8 cnc lathes and highly productive multi-spindle automatics 1998: FAT joined the HACO GROUP - new investments and increased production of mn & cnc lathes - new machine shop - production of modern teach-in lathes using state-of-the-art Technology - special projects - new sales strategy through dealer network - taking over a cast-iron foundry in Koluszki - production of the heavy duty 4-guide ways lathes FAT S.A. Grabiszyńska Street 281 PL 53-234 Wroclaw POLAND Phone: +48 71 3 09 100 Fax: +48 71 3 09 121 e-mail: info@fathaco.com DISTRIBUTOR: website: www.fathaco.com