AC DRIVES
MD65 AC MICRODRIVES T HE L ATEST A DDITION TO THE R ELIANCE M ICRODRIVE FAMILY Rockwell Automation is proud to introduce the newest sensorless vector control microdrive: The MD65. Following on the success of the MD60, the MD65 continues to establish the reliability and ease-of-use expected in the Reliance brand drives. The MD65 introduces a new class of microdrive product, with high performance motor control coupled with easy parameter setup. The onboard keypad provides users with out-of-the-box robust settings for simplified initial startup, as well as easy diagnostic capability for troubleshooting and fault detection. With the introduction of the MD65, Reliance Electric now offers a full line of microdrives from fractional to 15hp. These cost-effective, reliable products feature a range of performance specifications and adjustable features that will cover variable torque applications as well as constant torque, high performance applications. The MD65 global design meets standards for Europe, Asia, Australia, and North America. B Frame for 0.5HP to 5HP C Frame for 7.5HP to 15HP
MD65 AC MICRODRIVE FAST & SIMPLE S TARTUP STARTUP IS FAST AND SIMPLE WITH THE MD65 The MD65 provides users with a minimized parameter list for easy programming. The parameters are grouped into three categories, similar to the MD60: Basic Parameter Group P Parameters Advanced Parameter group A Parameters Display Group d Parameters ADVANCED FEATURES SET THE MD65 APART FROM THE COMPETITION: MD65 uses the same keypad and Basic Parameter Group as the MD60. The control keys on the keypad are active out-of-thebox for immediate 4-character LED display Program Key Up/Down Arrow 0000 Enter Key Stop Key Sensorless Vector Control Auto tuning Compare and Timer Functions 8 Preset Speeds 4 Configurable Digital Inputs 2 Configurable Digital Outputs 1 Analog Output (4-20mA or 0 10V) 1 Relay Output 2 Analog Inputs PID controller Skip Frequency Band Dynamic Braking (7th IGBT included) operation. PROGRAM Enter/exit program mode. Scroll through parameter groups. Back up one step in programming menu. Cancel a change to a parameter value. Drive Potentiometer UP ARROW /DOWN ARROW Scroll through P and A parameters. Increase/decrease the value of flashing digit. In Display Mode, increases/decreases internal frequency parameter if that parameter currently controlling the drive commanded speed. Start Key ENTER Display value of P or A parameter. Save a change to a parameter value. Scroll through display (d) parameters. Forward/Reverse Key POTENTIOMETER Control drive speed. Controlled by parameter P038. START Start the drive. Controlled by parameter P036. REVERSE Reverse direction of the motor. Controlled by parameters P036 and A095. STOP Stop the drive. Clear fault.
THE RIGHT DRIVE FOR MATERIAL HANDLING APPLICATIONS This compact and cost-effective product is ideally suited for material handling applications, with requirements for good speed regulation, high performance, and flexibility to handle a wide range of applications. The MD65 provides high starting torque and excellent low speed control. Output frequencies can be set up to 400 Hz and carrier frequencies are settable up to 16 khz. Sensorless Vector Control Good Low Speed Performance Auto Tuning for Easy Setup Wide Speed Range MD65 SENSORLESS VECTOR PERFORMANCE The MD65 provides exceptional speed regulation and very high levels of torque across the entire speed range of the drive. The autotune feature allows the MD65 to adapt to individual motor characteristics. THE MD65 PROVIDES SENSORLESS VECTOR PERFORMANCE IN ANEASY-TO-USE PACKAGE Input Voltage Phase MD65 DRIVE RATINGS Output Voltage Phase Ratings 115Vac Single 230Vac Three 1/2-1.5 Hp 230Vac Single 230Vac Three 1/2-3 Hp 230Vac Three 230Vac Three 1/2-10 Hp 230Vac Three 460Vac Three 1/2-15 Hp 600Vac Three 600Vac Three 1/2-15 Hp The MD65 provides the following features for optimal performance 60:1 Constant Torque Speed Range Sensorless Vector Control Auto Tuning for optimal performance DB control with integrated 7th IGBT Output Frequency range up to 400 Hz 150% overload for 1 minute, 200% for 3 seconds Custom V/Hz curve setting
MD65: THE B EST C HOICE W HERE P ERFO For local configuration, control, and monitoring, all drives are supplied with the on-board keypad and display. For local or remote configuration, control, monitoring, and diagnostics, the new MD65 drive offers a multi-line Nema 4x LCD Keypad. THE MD65 MOUNTING OPTIONS: IP20 standard Optional Nema 1 kit DIN rail mounting for drives up to 5 HP Remote Door Mount Nema 1 keypad Hand Held Copy Cat programmer MD65 OPTIONS PROVIDE FLEXIBLE, EASY OPERATION A wide range of options allow you to maximize both data and speed control. Remote Nema 4x LCD Keyapad Copy Cat Programmer External DB Resistors EMC filters for CE Compliance VS Utilities PC Software STANDARD IP20 DIN rail or panel mounting for 50 C ambient Zero stacking up to 40 C ambient COMMUNICATION CARD OPTIONS DeviceNet EtherNet/IP Profibus Communication Card Cover Kit Cable Accessory Kits NEMA 1 (IP30) KIT Field installed option for 40 C ambient
RMANCE IS K EY STEPLOGIC FOR LOW COST MACHINE LEVEL CONTROL Built-in Timers, Counters and Sequencing Logic Program eliminates the need for expensive stand alone timing relays and counters. The Sequencing Logic Program can eliminate the need for discrete wiring to a microcontroller by performing simple logic functions within the drive. MULTI-DROP NETWORK CAPABILITY Connect up to five (5) MD60 or MD65 drives with one network card. Lowest-cost Industry Solution for DeviceNet or EtherNet Networks TIMER AND COUNTER FUNCTIONS Digital inputs control digital outputs based on timer or counter function BASIC LOGIC FUNCTIONS AND and OR logic inputs provide application flexibility STEP LOGIC FUNCTION Logic controlled steps using preset speed settings Each step can be programmed to: Step based on digital input status including AND, OR and NOT logic Step based on specific time Control speed, direction and accel/decel rate Control the status of an input Make deterministic jumps RAISING THE BAR WITH ENGINEERING INNOVATION AND VALUE-ADDED SERVICES Just as the DODGE D-FLEX couplings raise the bar in engineering innovation, Rockwell Automation s Power Services Group sets new standards in value-added service solutions. With our Power Services Group and local service centers located throughout North America, we can help you maintain your operation with maintenance programs, equipment startup, and repair/rebuild services for motor and mechanical products that are unmatched in the industry. MD65S UP TOFIVE DRIVES ON ONE NODE UP TO FOUR MD60S OR MD65S Today, Reliance Electric MD65 drives are proving ideal for use in pulp & paper, aggregate and unit handling applications throughout the world. W/ 3RD PARTY TERMINATING RESISTOR RS-485
www.rockwellautomation.com www.dodge-pt.com www.reliance.com www.ptplace.com www.ptplace.ca www.ptplace.com.mx Corporate Headquarters Rockwell Automation, 777 East Wisconsin Avenue, Suite 1400, Milwaukee, WI, 53202-5302 USA, Tel: (1) 414.212.5200, Fax: (1) 414.212.5201 Headquarters for Dodge and Reliance Electric Products Americas: Rockwell Automation, 6040 Ponders Court, Greenville, SC 29615-4617 USA, Tel: (1) 864.297.4800, Fax: (1) 864.281.2433 Europe/Middle East/Africa: Rockwell Automation, Brühlstraße 22, D-74834 Elztal-Dallau, Germany, Tel: (49) 6261 9410, Fax: (49) 6261 17741 Asia Pacific: Rockwell Automation, 55 Newton Road, #11-01/02 Revenue House, Singapore 307987, Tel: (65) 6356-9077, Fax: (65) 6356-9011 Headquarters for Allen-Bradley Products, Rockwell Software Products and Global Manufacturing Solutions Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444 Europe/Middle East/Africa: Rockwell Automation SA/NV, Vorstlaan/Boulevard du Souverain 36, 1170 Brussels, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640 Asia Pacific: Rockwell Automation, 27/F Citicorp Centre, 18 Whitfield Road, Causeway Bay, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846 RAPS-959-3 8/04-15M-B This material is not intended to provide operational instructions. Appropriate Rockwell Automation instruction manuals and precautions should be studied prior to installation, operation or maintenance of equipment. Copyright 2003 Rockwell Automation. All rights reserved. Printed in USA. DODGE and RELIANCE ELECTRIC are trademarks of Rockwell Automation.