INIST SLIM LUMINIUM SYSTM inista Slim luminium System > Multifunctional, Versatile, Simple
inista Slim luminium System The inista Slim luminium System is a multifunctional shelving program that will allow you to design an endless array of storage solutions in many different rooms in the house or commercial situations. Manufactured in northern Italy, this range of products will allow you to create a wardrobe frame system, hanging bookshelf, a room divider or even a book display case the possibilities are endless. The unique design of the aluminium bar allows you to choose between having a concave or convex leading profile. ll joiners and accessories can be used with each profile. Top: inista Slim Wardrobe pplication ottom Left: inista Slim oncave Profile ottom entre: inista Slim onvex Profile INIST SLIM LUMINIUM SYSTM / PG 2
inista Slim luminium System Top: inista Slim edroom/study pplication ottom Left: inista Slim lat Shelf racket INIST SLIM LUMINIUM SYSTM / PG 3
Installation pplications loor to Wall Product required for each pillar: 1 x luminium bar (1-611-100) cut into two required lengths: a) vertical b) horizontal 1 x Wall onnector (1-611-104) which includes both a corner joint and a wall plate 1 x djustable loor oot (1-611-103) pplications: Wardrobes, shelving, bookshelf, TV entertainment units, office/desk Wall to Wall Product required for each pillar: 1 x luminium bar (1-611-100) cut into three required lengths: a) 1 x vertical b) 2 x horizontal 2 x Wall onnector (1-611-104) which includes both a corner joint and a wall plate pplications: ookshelf INIST SLIM LUMINIUM SYSTM / PG 4
Installation pplications loor to eiling - lat eiling Product required for each pillar: 1 x luminium bar (1-611-100) max height including connections 3026mm (+15mm foot adjustment) 1 x eiling onnection lat eiling (1-611-105) 1 x djustable loor oot (1-611-103) pplications: Room divider, wardrobe loor to eiling - Sloping eiling Product required for each pillar: 1 x luminium bar (1-611-100) max height including connections 3026mm (+15mm foot adjustment) 1 x eiling onnection Sloping eiling (1-611-106) 1 x djustable loor oot (1-611-103) pplications: Room divider, wardrobe, under stairs, loft conversion INIST SLIM LUMINIUM SYSTM / PG 5
inista Slim Products luminium ar 3000mm ode: 1-611-100 luminium nodised ar W16mm x 52.77mm x L3000mm Two profile options concave or convex asy to cut to length with straight cuts ccessories attached to channel on edge of bar by using allen key screw 16 mm 52.77 mm djustable oot ode: 1-611-103 omes with 1 x foot bracket, 1 x self threading screw & 1 x adjustable foot Slides into and connects to base of aluminium bar oot bracket adds 11mm to length of vertical bar once installed (does not include adjustment height oot can be adjusted by max 15mm in length 11mm orner Joint and Wall onnector 16.5mm ode: 1-611-104 omes with 1 x corner joint & 1 x wall connection Slides and connects to aluminium bar dds 24mm to the length of the horizontal bar once installed ar attaches to wall connect or by sliding down onto the bracket INIST SLIM LUMINIUM SYSTM / PG 6 7.5mm 7mm
inista Slim Products lat eiling onnector ode: 1-611-105 omes with 1 x ceiling connection & 1 x fixing kit Slides and connects to aluminium bar dds 16.5mm to length of vertical bar length once installed 16.5mm Sloping eiling onnector ode: 1-611-106 omes with 1 x ceiling adapter & 1 x fixing kit 3 x M4 screws, 1 x self threading screw, ceiling screw llows for the aluminium bar to be attached to a sloping ceiling with an angle of between 0 and 45 * *ny angle between 0-45 ILING lat Shelf Holder ode: 1-611-101 W160mm x 22mm x H22mm Supplied as a pair ttached to channel on aluminium bar ble to attach wooden shelf and drawer Glass shelf requires 1-611-102 glass shelf bracket to install INIST SLIM LUMINIUM SYSTM / PG 7
inista Slim Products Glass Shelf racket ode: 1-611-102 To be use in conjunction with flat shelf holder (1-611-101) omes with 1 x glass shelf bracket & 4 grommets ble to hold any thickness glass shelf 1-611-101 and 1-611-102 shown Sloping Shelf ode: 1-611-107 llows you to create a shelf on all angles you like with a full 360 adjustment esigned for wooden shelves only Perfect to create shoe racks, magazine displays esk racket ode: 1-611-109 Supplied in pairs 445mm long rills directly into wall does not connect to aluminium bar INIST SLIM LUMINIUM SYSTM / PG 8
inista Slim Products Rail Tube Holder ode: 1-611-108 Suits W15mm x H30mm tube (1-491-196) ully adjustable in height luminium Tube ode: 1-491-196 H30mm x W15mm x L3600mm luminium rail in bright chrome finish inista asket ccessory ode: 1-611-110 llows you to attach any of the inista basket products to the bar to create an instant basket accessory Suits inista drawer and shoe rack pullouts see pages 10 and 11 INIST SLIM LUMINIUM SYSTM / PG 9
ccessory Products inista Pullout rawer askets come with front attachment bracket as standard Soft close runners Load capacity = 40kg Kit includes: 1 x basket, 2 x runners, 1 x front attachment bracket (pair) Y Wall X rawer Height Internal Width etween ars (X) epth rom entre of ar to Wall (Y) asket ode 135mm 411mm 250mm min. hrome 1-471-020 135mm 561mm 250mm min. hrome 1-471-021 135mm 861mm 250mm min. hrome 1-471-022 200mm 411mm 250mm min. hrome 1-471-023 200mm 561mm 250mm min. hrome 1-471-024 200mm 861mm 250mm min. hrome 1-471-025 inista Pullout Shoe Rack Soft close runner ttaches to side of cabinet hrome finish an install multiple rows above each other Y Wall X Internal Width etween ars (X) epth rom entre of ar to Wall (Y) Pairs ode 561mm 225mm min. 4-6 1-472-000 861mm 225mm min. 10-12 1-472-001 inista Pullout Pant Rack Soft close runner Housing: aluminium with satin chrome finish Rails: steel with satin chrome finish Y Wall X Internal Width etween ars (X) epth rom entre of ar to Wall (Y) Rails ode 411mm 200mm min. 7 1-472-002 561mm 200mm min. 10 1-472-003 861mm 200mm min. 17 1-472-004 INIST SLIM LUMINIUM SYSTM / PG 10 NOT: ll products attach to the aluminium bar using 1-611-110 inista ccessory racket
ccessory Products inista Slide Out Pant Rack Universal left or right installation Housing: steel with satin chrome finish Rails: steel with satin chrome finish 470 370 91 xternal abinet Width epth rom entre Of ar Rails ode 450mm min 250mm min. 10 1-472-005 inista Slide Out Rod 28.8 Universal left or right installation Steel with satin chrome finish Great for hanging clothes hangers 80.5 350 Internal abinet Width epth rom entre Of ar ode 50mm min 140mm 1-472-010 inista Slide Out elt Rack Universal left or right installation Steel with satin chrome finish 87.5 350 56 Internal abinet Width epth rom entre Of ar Positions ode 100mm min 140mm 7 1-472-011 inista Slide Out Tie Rack Universal left or right installation Steel with satin chrome finish 78.2 350 60 Internal abinet Width epth rom entre Of ar Positions ode 100mm min 140mm 16 1-472-012 NOT: ll products attach to the aluminium bar using 1-611-110 inista ccessory racket INIST SLIM LUMINIUM SYSTM / PG 11
Installation Measurements for luminium ars 1-611-100 loor to Wall pplication 1-611-104 dds 24mm to depth dds 7mm to height lat eiling to loor pplication 1-611-105 dds 16.5mm to height loor to Wall pplication Measurement xample: The Horizontal ar is 300mm long. fter attaching the orner Joint and Wall Joint 1-611-104 it is 324mm long. The Vertical ar was originally 600mm high, but once the orner Joint 1-611-104 and djustable oot 1-611-103 are attached, it is now 618mm high. 1-611-103 dds 11mm to height 1-611-103 dds 11mm to height NOT: ll fixtures and fittings are supplied INIST SLIM LUMINIUM SYSTM / PG 12
Installation Instructions Installing a 90 orner Joint to the wall 3 x self-tapping screws Ø5 x 50mm 1 x 90 metal joint 1 x M4 grub screw G 1 x metal intermediate piece 1 x chipboard screw Ø5 x 60mm 1 x metal wall foot G 1 x wall plug Ø8mm X & Y refers to aluminium bar that is sold separately under code 1-611-100 Y X 1. Slide the metal joint into the horizontal bar section X and screw in the self-tapping screw. 2. Push the vertical bar section Y onto the metal joint and fix with second self-tapping screw. 3. ix the metal intermediate piece into the horizontal bar section X with third self-tapping screw. 4. rill the wall with a Ø8mm bit and insert the wall plug G. 5. ix the wall foot to the wall with screw. 6. onnect the metal intermediate piece with the wall foot and fix them together with grub screw. Installing an djustable oot 1 x metal intermediate foot 1 x self-tapping screw Ø5.5mm 1 x adjustable round foot refers to aluminium bar that is sold separately under code 1-611-100 1. Insert foot onto the vertical bar section using the self-tapping screw. 2. Screw adjustable foot under intermediate foot. INIST SLIM LUMINIUM SYSTM / PG 13
Installation Instructions Installing a lat eiling onnection X X 1 x self-tapping screws Ø5 x 50mm 1 x M4 grub screw 1 x metal intermediate piece 1 x chipboard screw Ø5 x 60mm 1 x metal ceiling foot 1 x wall plug Ø8mm refers to aluminium bar that is sold separately under code 1-611-100 1. ix the metal intermediate piece into the horizontal bar section X with self-tapping screw. 2. rill the ceiling position with a Ø8mm drill bit and insert the wall plug. 3. ix the ceiling foot to the ceiling with screw. 4. onnect the metal intermediate piece with the ceiling foot and fix them together with grub screw. Installing a Sloping eiling racket H G X G H X 1 x wall plug Ø8mm 1 x chipboard screw Ø5 x 60mm 1 x threading screw Ø5 x 60mm 1 x sphere joint 1 x ferrule 1 x ceiling plate 1. ix the zamak cap G to the vertical bar section X with the threading screw interposing between the two components of the ferrule and the sphere. 2. rill the ceiling with an Ø8mm drill bit at the same angle of the slope of the ceiling and insert the wall plug. 3. ix the ceiling plate to the ceiling with the chipboard screw. 1 x zamak cap 4. Now fix the components X-G-- coupling the ferrule with the ceiling plate and fix them together with the 3 x 3 x M4 x 12mm screws M4 screws H. refers to aluminium bar that is sold separately under code 1-611-100 Installing a Hanging Rail racket 1. Insert anti-scratch between the a pair of front and rear rail brackets. 2. asten the rail brackets and with the M4 screw onto the channel on the vertical bar. 2 x front section rail brackets 2 x rear section rail brackets 2 x anti scratch plates 2 x M4 x 25mm screws 3. Make sure that the two rail brackets and are completely closed against each other tightly. 4. Repeat the above three steps on the opposite side making sure both installed brackets are level. 5. inally insert the rail tube (1-491-196) into the mounted rail bracket. INIST SLIM LUMINIUM SYSTM / PG 14
Installation Instructions Installing a lat Shelf racket 1. Insert anti-scratch between the a pair of front and rear shelf brackets. 2. asten the shelf brackets and with the M4 screw onto the channel on the vertical bar. 2 x front section shelf brackets 2 x rear section shelf brackets 2 x anti scratch plates 2 x M4 x 25mm screws 4 x chipboard screws Ø3.5mm 3. Make sure that the two shelf brackets and are completely closed against each other tightly. 4. Repeat the above three steps on the opposite side making sure both installed brackets are level 5. inally mount the wooden shelf or drawer box onto the shelf brackets and fix to the bracket using chipboard screws. Installing a Glass Shelf 2 x front section glass clamp 2 x rear section rail brackets 8 x plastic grommets transparent 2 x anti scratch plates 2 x M4 x 25mm screws 2 x flat shelf brackets 1. ollow the instructions on how to install a flat shelf bracket first (see page 14) and then install 2 x plastic grommets into the top holes on the bracket instead of using screws. 2. Insert anti scratch plate into position between the 1 x front clamp and 1 x rear clamp. 3. Insert a plastic grommets into the holes at the base of the clamps and position on the vertical bar. NOT: To install a glass shelf you are required to purchase one each of the following items: 1 x 1-611-101 lat Shelf racket and 1 x 1-611-102 Glass Shelf lamp 4. Place the glass shelf onto the flat shelf bracket and then fasten the glass clamps and together using 1 x M4 screw making sure they are clamped tightly together and pressed tightly against the glass shelf to hold it into position. Installing a Sloping Shelf 1. Insert the brass cylinder in place between the two of the shelf brackets. 2. Insert anti-scratch between the a pair of shelf brackets. 3. aster the brackets together using 2 of the M4 x 25mm screws on either side of the brackets making sure they are clamped tightly together and positioned at the right height. 4. Place the shelf hanger onto the round disc on the brackets and adjust to required incline. 4 x shelf brackets 2 x shelf hangers 2 x brass cylinders 4 x countersunk screws M4 x 10mm 4 x M4 x 25mm screws 5. asten the shelf hanger with 2 x countersunk M4 screws. 6. Set the wooden board over the shelf hanger, fixing the board to the hanger through the allocated screw holes (these screws are not supplied). 2 x anti scratch plates INIST SLIM LUMINIUM SYSTM / PG 15
INIST SLIM LUMINIUM SYSTM all your nearest branch on: Ph: 1300 551 919 ax: 1300 739 656 www.lincolnsentry.com.au Scan QR code to find your nearest branch or locations please visit http://www.lincolnsentry.com.au/contact-us/locations R0040H