Uniclass L3811:P43. CI/SfB (21.4) Xh4. December 2007

Uniclass L3811:P43 CI/SfB (21.4) Xh4 December 2007 Ground Floor Treatments Technical Data Sheet Thermally Broken Commercial Entrance Door & Framing Non-thermally Broken Commercial Entrance Door & Framing Sapa Building System

2 Ground Floor Treatment Contents 3 4 5 6 10 12 13 14 15 16 17 18 19 19 20 20 21 21 22 22 24 25 26 28-29 30-31 32-35 36 37 38 39 40 41 42 43 44 45 46 47 48 49-50 51 52 53 54 Support Services Stormframe ST Thermally Broken Commercial Entrance Door & Framing Design Features Performance Data Thermal Performance Graphs Profile Identification & Inertia Values General Arrangements: Centre Pivot Door - Horizontal Section - Standard Stiles Centre Pivot Door - Vertical Section Centre Pivot Door - Horizontal Section - Wide Stiles Rebated Door - Horizontal Section Rebated Door - Vertical Section Deep Bottom Rail Adaptor Alternative Ramped, Drainage and Zero Threshold Arrangement Coupling Head to Window Wall Cill Coupling Jamb to Window Wall Jamb Coupling Jamb to Elegance 52 Curtain Wall Coupling Head to Elegance 52 Curtain Wall Door Stile to Mullion Mullion & Jamb Transom Over Door Head - Transom - Cill 202 Non Thermally Broken Commercial Entrance Door & Framing Design Features Performance Data Profile Identification & Inertia Values General Arrangements: Centre Pivot Door Standard Stile Options Standard Meeting Stile Options Standard Top Rail Options Standard Bottom Rail Options Standard Lay Bar and Mid Rail Options Standard Door Head/Transom Options - centre pivot Standard Door Head/Transom Options - rebate Standard Door Transom Options Standard Door Cill Options - centre pivot Standard Door Cill Options - rebate Standard Door Jamb Options - centre pivot Standard Door Jamb Options - rebate Standard Fixed Frame Options - head Standard Fixed Frame Options - transom Standard Fixed Frame Options - mid rail Standard Fixed Frame Options - cill and sub cill Standard Fixed Frame Options - jambs Standard Fixed Frame Options - mullion Standard Fixed Frame Options - corner post Standard Fixed Frame Options - 75mm framing

Support Support services 3 Our field based Project Consultants, working with our in-house Contracts Design and Administration team, provide UK specifiers with specialist advice concerning the correct application of products, giving guidance on Building Regulations, British Standards and other issues such as product specifications, usage, maintenance and safety. Complementary to this, our Product Support Department has an invaluable reservoir of experience on every aspect of our product range. We also appreciate that the specification process is influenced by client demands to obtain best value, and to that end, we can participate in site visits, design meetings and budgetary planning. Design stages can be formalised through written specification documents (which can be supplied in either an NBS format, or your own specification layout) and supported by samples, literature and drawings for consultation or planning issues. Sapa Group Sapa Building Systems Limited is a member of the worldwide Sapa Group. We develop and market high value-added profiles in aluminium and are the leading independent producer of aluminium profiles in the world, with customers in Europe, North America and Asia. In the UK, the Sapa Group has extensive multisite extruding, re-melt, anodising and polyester powder coating facilities, offering total control and a fast and co-operative response. Taking this partnership approach through the whole project allows on-site monitoring of manufacturing and installation ensuring the specifier always has professional support from a worldwide group. Drawing on one of the largest fabricator and installer networks in the UK, we can provide details of specialist contractors who will quote or tender competitively for any type of contract. For specification assistance or details of fabricators & installers, please call our Marketing Department on 01684 853500. Backed by the resources of the Group, Sapa Building Systems Limited offers architects and specifiers a wide range of innovative aluminium systems for curtain walling, doors, windows and specialist applications. With a wealth of European knowledge and experience our company incorporates the highly respected Glostal, Monarch and RC System brands that have satisfied the demands of specifiers for over four decades. Our company systems have been approved under BS EN ISO 9001:2000 and we have been recognised as an Investor in People for over three years. FM01154

4 Design Design Features ST Thermally Broken Commercial Entrance Door & Framing Flexible design: The Sapa Stormframe range of commercial doors and framing includes: a thermally broken door; a non-thermally broken door and non-thermally broken framing. Together the Stormframe range offers specifiers a choice of systems to suit the specific demands of their clients. Choice of pivot (with anti-finger trap stile option) or rebated doors can be installed with a BS8300 bottom rail adaptor, Part M compliant drained threshold and upto 32mm glazing. Designed to accept a wide range of industry standard hardware including Dorma, Axim and Adams Rite. Superior thermal performance: The Stormframe ST Door offers high levels of both thermal insulation achieving a U value of 2.2 W/m2K. This low U value can help building designers to achieve their Target Emissions Rate (TER) by being offset against the allowable U value of 6.0 W/m2K for high traffic doors when calculating the Building Emissions Rate (BER). The ST Door can be coupled to Dualframe framing and Elegance 52 curtain walling to provide a complete solution for building facades requiring high levels of thermal performance. Dual colour capability: The Stormframe ST door and Dualframe systems can have differing finishes internally and externally. Integrated design: The Stormframe suite consists of a range of profiles that can be integrated with other products from the extensive range of systems including curtain walling. Unique polyamide thermal barrier: The ST door and framing provides thermal insulation via a high performance polyamide thermal barrier. Ease of maintenance: The design of the Stormframe system ensures that cleaning and other maintenance can be carried out easily. Product Stormframe ST thermally broken commercial entrance door and framing. Design Variants Can be constructed to form single or double doors to be inserted directly into masonry, side frames or curtain walling. Compatibility Can also be integrated with other products from the Sapa range inlcluding Dualframe and Elegance 52 curtain walling. Application Suitable for installation in new build or replacement projects in commercial or public buildings. Finishes A wide range of polyester powder coat finishes is available to BS EN 12206:1 2004. Anodised finishes are to BS 3987 Grade AA25 etch silver with a range of special anodised finishes on application. For more details, or to talk to a Project Consultant, contact the Marketing Department on 01684 853500.

Performance Performance data 5 Stormframe ST Thermally Broken Commercial Entrance Door & Framing Composition and Manufacture Aluminium profiles are extruded from aluminium alloy 6060 T6 complying with the recommendations of BS EN 755-9:2001. Weathersealing is a combination of polypropylene backed woven pile and extruded synthetic rubber seals held in undercut grooves extruded in the aluminium profiles. The thermal barrier section within the ST Door variation is achieved using two separate aluminium extrusions and two polyamide extrusions mechanically jointed to form a single compound profile. Frame members are square cut for jointing with self tapping screws fixing into screw splines extruded in the aluminium profiles. Door leaf profiles are square cut and assembled with extruded aluminium brackets and clamp plates then fixed with M8 socket cap head machine screws. All joints are sealed against water entry during fabrication (see weather performance). Weather Performance There are no recognised performance standards for air and water leakage through commercial doors. However the ST Door has been tested in line with BS 6375: Part 1:2004 and has achieved the highest classification for doors when manufactured, installed and glazed strictly to the details outlined in the Sapa Product Manual. Water Tightness Class 3A (100 Pascals) Air Permeability Class 2 (300 Pascals) Gust Class A3 (1200 Pascals) Note - Adams Rite 4022 head and cill bolts to top and bottom of door must be used to obtain this classification. In keeping with industry recommendations, it is adviseable to give special consideration to doors on exposed sites. High wind pressures can cause inadvertent opening of pivoted doors and consequent draughts and water penetration. It may be adviseable under such circumstances to provide protection by means of a porch or lobby. All joints must be coated with Tremco small joint sealant or similar in order to effectively seal the frame and leaf assembly from water penetration. Authority BS 6262: Code of practice for glazing for buildings. BS EN 755-9: Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Profiles, tolerances on dimension and form. BS 3987: Specification for anodic oxide coatings on wrought aluminium for external architectural applications. BS EN 12206:1 2004: Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and perforated sections for external architectural purposes. Sizes Door leaf maximum sizes will be determined by a combination of site exposure conditions and hardware specification. For rebated doors, the overall leaf weight should not exceed 120 Kg for a two-hinge installation. For centre pivot doors, suitable strengths closers must be fitted according to the width and area of the door leaf. Maximum door leaf weight = 90 Kg. Minimum door width is 910mm for Adams Rite exit device when panic bar is fitted. Maximum opening size for pivot and rebate doors leaves are 2150mm high x 1175mm wide (1050mm wide for concealed closers). For doors subject to Part M of the Building Regulations, and/or BS8300:2001, consideration should be given to the requirements within those documents for minimum opening widths and opening/closing forces when specifying door dimensions and hardware. Hardware and Security The standard fittings provided for these doors are: Dorma RTS85 concealed overhead door closers for pivoted doors and Dorma pivot hinges for rebated doors. Adams Rite MS 2200 security lock with hook bolt and European standard profiles cylinders with optional Adams Rite 4022 head and cill bolt to top and bottom of door. Aluminium tubular pull handles and pad handles. Variations by way of special handles, pivot hinges, latch lock, master key systems, emergency exit devices (as shown in the Sapa Product Manual), automatic door operation, electronic security etc can all be incorporated into the system as required. Glazing Glass must conform to the requirements of BS6262 for thickness and type. Glass is set dry against synthetic rubber gaskets. Glass is supported on adjustable setting blocks. Glazing beads and gaskets will accommodate glass and/or panels of 28mm and 32mm nominal thickness. Thermal Performance The graphs on pages 6 TO 11 show U value performance figures for a typical ST Door with drained low threshold, standard top, mid and bottom rails with anti-finger trap hinge stuiles. Figures for are standard aluminium edge spacers. Site Work Fabrication, installation and glazing service is available through a nationwide network of fabricators & installers. For details of suitable fabricators & installers, please contact our Marketing Department on 01684 853500.

6 Stormframe ST Thermally Broken Commercial Entrance Door & Framing U Value Graphs Standard lock stile, Anti Finger Trap Hanging Stile 1.2 Centre Pane Without Midrail 1.3 Centre Pane Without Midrail 2.1 2.2 2.2 2.3 2.3 2.4

7 Stormframe ST Thermally Broken Commercial Entrance Door & Framing U Value Graphs Standard lock stile, Anti Finger Trap Hanging Stile 1.4 Centre Pane Without Midrail 1.5 Centre Pane Without Midrail 2.2 2.3 2.4 2.4 2.5 2.3

8 Stormframe ST Thermally Broken Commercial Entrance Door & Framing U Value Graphs Standard lock stile, Anti Finger Trap Hanging Stile 1.2 Centre Pane With Midrail 1.3 Centre Pane With Midrail 2.1 2.2 2.2 2.3 2.3 2.4

9 Stormframe ST Thermally Broken Commercial Entrance Door & Framing U Value Graphs Standard lock stile, Anti Finger Trap Hanging Stile 1.4 Centre Pane With Midrail 1.5 Centre Pane With Midrail 2.2 2.3 2.4 2.4 2.5 2.3

10 Stormframe ST Thermally Broken Commercial Entrance Door & Framing PROFILE IDENTIFICATION & INERTIA VALUES This page gives information on the inertia values of the integral mullions, transoms and coupling mullions. BS 6399 must be used to calculate the inertia value required. Profile Inertia (mm 4 ) Profile Inertia (mm 4 ) 572,255 133,842 120,283 123,646 ST405 ST410 478,450 1,042,561 137,822 215,291 ST406 ST412 122,564 148,103 3,048 121,224 ST407 ST413 530,300 523,447 132,567 137,318 ST408 ST414 134,047 641,556 116,258 184,354 ST409 ST419

11 Stormframe ST Thermally Broken Commercial Entrance Door & Framing Elevation Page Centre Pivot Door - Horizontal Section - Standard Stiles Centre Pivot Door - Vertical Section Centre Pivot Door - Horizontal Section - Wide Stiles Rebated Door - Horizontal Section Rebated Door - Vertical Section Deep Bottom Rail Adaptor Alternative Ramped, Drainage and Zero Threshold Arrangement Coupling Head to Window Wall Cill Coupling Jamb to Window Wall Jamb Coupling Jamb to Elegance 52 Curtain Wall Coupling Head to Elegance 52 Curtain Wall Door Stile to Mullion Mullion & Jamb Transom Over Door Head - Transom - Cill 12 13 14 15 16 17 18 19 19 20 20 21 21 22 22 These drawings illustrate a number of the available profile combinations. Other combinations are available please consult Sapa Building Systems for further details.

12 Stormframe ST Thermally Broken Commercial Entrance Door & Framing Centre Pivot Door - Horizontal Section - Standard Stiles NOTE - Where an anti finger trap stile is not required, A B ST409 can be used instead, as per lock stile shown. ST222 A A C C D F D E ST223 STC110 STP210 ST410 ST409 ST404 ST408 ST222 ST408 F ST409 ST409 STP217 E B A

13 Stormframe ST Thermally Broken Commercial Entrance Door & Framing Centre Pivot Door - Vertical Section E ST223 ST402 STC164 STC120 2816 STP211 ST216 ST207 ST215 C ST223 ST407 ST401 ST405 105/54 D ST223 ST412 ST223

14 Stormframe ST Thermally Broken Commercial Entrance Door & Framing Centre Pivot Door - Horizontal Section - Wide Stiles A B STC110 ST419 ST408 STP217 STP210 ST223 NOTE - ST419 wide hang stiles cannot be used in an anti finger trap configuration. ST419 ST419 F

15 Stormframe ST Thermally Broken Commercial Entrance Door & Framing Rebated Door - Horizontal Section G H ST414 ST219 L J H G K J G L G Opposite K ST414 2822 DFC284 ST409 ST409 ST226 105/37 ST409 ST409 NOTE - ST226 slave stile rebate adaptor must not be used on doors with exit devices. 105/59 105/54 STP210

16 Stormframe ST Thermally Broken Commercial Entrance Door & Framing Rebated Door - Vertical Section ST402 K Note that rebated doors must always use 2709 or ST240 threshold STC164 STP211 2816 2709 J ST414 ST219 2822 DFC284 ST401

13 17 Stormframe ST Thermally Broken Commercial Entrance Door & Framing Deep Bottom Rail Adaptor ST411 ST411 To top of threshold ST411 For compliance with BS 8300 regulations, fit two ST411 deep bottom rail adaptors to give the required 400mm dimension K

18 Stormframe ST Thermally Broken Commercial Entrance Door & Framing Alternative Zero Threshold Arrangement Alternative Ramped Threshold Arrangement Alternative Drainage Threshold Arrangement K K K 2709 ST240 ST241

19 Stormframe ST Thermally Broken Commercial Entrance Door & Framing Coupling Head to Window Wall Cill Coupling Jamb to Window Wall Jamb For further details see Dualframe Window Wall Product Manual No. 10 x 1 Pan Self Tapper No. 10 x 1 3/4 Pan Self Tapper

20 Stormframe ST Thermally Broken Commercial Entrance Door & Framing Coupling Jamb to Elegance 52 Curtain Wall For further details see Elegance 52 Curtain Wall Product Manual No. 10 x 1 1/2 Pan Self Tapper No. 10 x 1 1/2 Pan Self Tapper ST235 Coupling Head to Elegance 52 Curtain Wall No. 10 x 3/8 Pan Self Tapper No. 10 x 1 1/4 Pan Self Tapper ST235

21 A A B D Stormframe ST Thermally Broken Commercial Entrance Door & Framing Door Stile to Mullion E ST201 Typical ST Door Stile ST201 ST408 ST201 ST201 ST408 ST408 F Mullion G Jamb E F G B C

22 Stormframe ST Thermally Broken Commercial Entrance Door & Framing D Transom Over Door A Head B Transom C Cill ST218 ST408 ST224 ST406 ST224 ST406

This page has been left intentionally blank 23

24 Design Design Features 202 Non-thermally Broken Commercial Entrance Door & Framing Flexible design: The Sapa 202 Non-thermally Broken Commercial Entrance Door and Framing range includes a non-thermally broken door and non-thermally broken framing. Together they offer specifiers a choice of configurations to suit the specific demands of their clients. Choice of pivot (with anti-finger trap stile option) or rebated doors can be installed with a BS8300 bottom rail adaptor, Part M compliant drained threshold and upto 32mm glazing. Designed to accept a wide range of industry standard hardware including Dorma, Axim and Adams Rite. Dual colour capability: The 202 Non-thermally Broken Commercial Entrance Door and Framing and Dualframe systems can have differing finishes internally and externally. Integrated design: The 202 suite consists of a range of profiles that can be integrated with other products from the extensive range of systems including curtain walling. Ease of maintenance: The design of the 202 system ensures that cleaning and other maintenance can be carried out easily. Product 202 Non-thermally Broken Commercial Entrance Door and Framing. Design Variants Can be constructed to form single or double doors to be inserted directly into masonry, side frames or curtain walling. Compatibility Can also be integrated with other products from the Sapa range inlcluding Dualframe and Elegance 52 curtain walling. Application Suitable for installation in new build or replacement projects in commercial or public buildings. Finishes A wide range of polyester powder coat finishes is available to BS EN 12206:1 2004. Anodised finishes are to BS 3987 Grade AA25 etch silver with a range of special anodised finishes on application. For more details, or to talk to a Project Consultant, contact the Marketing Department on 01684 853500.

Performance Performance data 25 202 Non-thermally Broken Commercial Entrance Door & Framing Composition and Manufacture Aluminium profiles are extruded from aluminium alloy 6060 T6 complying with the recommendations of BS EN 755-9:2001. Weathersealing is a combination of polypropylene backed woven pile and extruded synthetic rubber seals held in undercut grooves extruded in the aluminium profiles. Frame members are square cut for jointing with self tapping screws fixing into screw splines extruded in the aluminium profiles. Door leaf profiles are square cut and assembled with extruded aluminium brackets and clamp plates then fixed with M8 socket cap head machine screws. All joints are sealed against water entry during fabrication (see weather performance). Weather Performance There are no recognised performance standards for air and water leakage through commercial doors. Where certified weather performance is a requirement we recommend you consider the Sapa ST Thermally Borken Commercial Door and Framing system whch has been tested in line with BS 6375: Part 1:2004. In keeping with industry recommendations, it is adviseable to give special consideration to doors on exposed sites. High wind pressures can cause inadvertent opening of pivoted doors and consequent draughts and water penetration. It may be adviseable under such circumstances to provide protection by means of a porch or lobby. All joints must be coated with Tremco small joint sealant or similar in order to effectively seal the frame and leaf assembly from water penetration. Authority BS 6262: Code of practice for glazing for buildings. BS EN 755-9: Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Profiles, tolerances on dimension and form. BS 3987: Specification for anodic oxide coatings on wrought aluminium for external architectural applications. BS EN 12206:1 2004: Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and perforated sections for external architectural purposes. Hardware and Security The standard fittings provided for these doors are: Dorma RTS85 concealed overhead door closers for pivoted doors and Dorma pivot hinges for rebated doors. Adams Rite MS 2200 security lock with hook bolt and European standard profiles cylinders with optional Adams Rite 4022 head and cill bolt to top and bottom of door. Aluminium tubular pull handles and pad handles. Variations by way of special handles, pivot hinges, latch lock, master key systems, emergency exit devices (as shown in the Sapa Product Manual), automatic door operation, electronic security etc can all be incorporated into the system as required. Glazing Glass must conform to the requirements of BS6262 for thickness and type. Glass is set dry against synthetic rubber gaskets. Glass is supported on adjustable setting blocks. Glazing beads and gaskets will accommodate glass and/or panels of 28mm and 32mm nominal thickness. Site Work Fabrication, installation and glazing service is available through a nationwide network of fabricators & installers. For details of suitable fabricators & installers, please contact our Marketing Department on 01684 853500.

26 202 Non-thermally Broken Commercial Entrance Door & Framing PROFILE IDENTIFICATION & INERTIA VALUES This page gives information on the inertia values of the integral mullions, transoms and coupling mullions. BS 6399 must be used to calculate the inertia value required. Profile/Illustration Inertia mm 4 Profile/Illustration Inertia mm 4 Profile/Illustration Inertia mm 4 Profile/Illustration Inertia mm 4 2266 881,614 2953 258,879 2963 175,453 2996 898,980 124,111 21,539 148,935 146,002 2267 242,231 2954 244,879 2973 113,637 2997 938,183 3,874 1,523 40,699 128,398 2300 974,532 2955 899.831 2981 976,452 2998 255,855 262,868 158,495 129,124 8,620 2301 974,552 2956 939,842 2982 761,493 8011 62,074 289,812 127,464 74,425 1,985 2302 149,902 2957 837,136 2983 270,595 8016 44,803 149,902 122,850 10,948 2,761 2526 66,237 2958 265,589 2987 660,816 8017 293,526 66,237 2,586 35,916 44,753 2757 246,457 2960 917,155 2991 1710,403 8018 249,594 1,636 135,039 691,812 18,847 2951 952,037 2961 1717,964 2992 714,142 8019 100,955 128,306 627,638 49,997 1,867 2952 824,240 2962 650,463 2993 851,559 8025 824,508 83,007 31,642 167,070 824,508

27 202 Non-thermally Broken Commercial Entrance Door & Framing Elevation Centre Pivot Door Standard Stile Options Standard Meeting Stile Options Standard Top Rail Options Standard Bottom Rail Options Standard Lay Bar and Mid Rail Options Standard Door Head/Transom Options - centre pivot Standard Door Head/Transom Options - rebate Standard Door Transom Options Standard Door Cill Options - centre pivot Standard Door Cill Options - rebate Standard Door Jamb Options - centre pivot Standard Door Jamb Options - rebate Standard Fixed Frame Options - head Standard Fixed Frame Options - transom Standard Fixed Frame Options - mid rail Standard Fixed Frame Options - cill and sub cill Standard Fixed Frame Options - jambs Standard Fixed Frame Options - mullion Standard Fixed Frame Options - corner post Standard Fixed Frame Options - 75mm framing Page 28-29 30-31 32-35 36 37 38 39 40 41 42 43 44 45 46 47 48 49-50 51 52 53 54 These drawings illustrate a number of the available profile combinations. Other combinations are available please consult Sapa Building Systems for further details.

28 202 Non-thermally Broken Commercial Entrance Door & Framing Centre Pivot Door INSIDE 2954 C D A B E A F A* A 105/41 105/54 8060 F B C D E 2811 2751 2752 2951 2832 OUTSIDE 105/37 105/59 8060 2752 * = opposite hand to that shown

29 202 Non-thermally Broken Commercial Entrance Door & Framing Centre Pivot Door Optional Mid Rail 2732/2733 D E 2757 105/41 2704 INSIDE OUTSIDE 8060 2705 2756 105/196 2709 Optional Mid Rail 2730/2731 D

30 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Stile Options Centre Pivot & Rebate Centre Pivot Shown INSIDE 105/54 105/54 A A A A* 2754 A 105/54 105/92 A 2752 A 2702 + 2703 202/58 OUTSIDE 2755 A * = opposite hand to that shown

31 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Stile Options Centre Pivot & Rebate Centre Pivot Shown INSIDE 105/41 Anti-finger trap stile for centre pivot only 105/41 A 2811 2751 A&B 2832 A&B A&B B* 2713 2704 A A* 202/442 105/41 105/41 2713 OUTSIDE 2713 2705 2706 2715 (Dotted) A * = opposite hand to that shown

32 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Meeting Stile Options Centre Pivot & Rebate 105/37 INSIDE F 2754 2701 F 105/37 105/59 F 2755 OUTSIDE 105/37 105/59 2752 F

33 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Meeting Stile Options Centre Pivot & Rebate 105/37 F INSIDE F 2754 2758 F 105/41 F 2758 F 105/41 OUTSIDE 2701 202/58 Open in doors shown, Mirror illustration for open out doors 2701 2758 105/41 105/92 2702 + 2703

34 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Meeting Stile Options Centre Pivot & Rebate 105/37 F INSIDE F 2752 2753 F 105/41 105/59 F 2704 2713 F 105/41 OUTSIDE 2701 105/41 Open in doors shown, Mirror illustration for open out doors 105/41 2702 + 2712 2753

35 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Meeting Stile Options Centre Pivot & Rebate INSIDE F F 2705 2713 105/41 F 2706 2715 (Dotted) 2713 105/41 OUTSIDE 105/59 105/59

36 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Top Rail Options Centre Pivot & Rebate Centre Pivot Shown 2705 2706 INSIDE OUTSIDE C C C C 2704 C

37 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Bottom Rail Options Centre Pivot & Rebate Centre Pivot Shown INSIDE OUTSIDE 2706 2705 E E 2756 105/196 E E Weather-strip carrier profile 2756 cannot be used with profile 2715 2715 Use on Rebate or Sliding door E

38 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Lay Bar & Mid Rail Options Centre Pivot & Rebate D Centre Pivot Shown 2732/2733 2730/2731 D D D G 8016 INSIDE OUTSIDE 2973 G

39 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Door Head/Transom Options Centre Pivot C 2957 2757 C1 C1 2955 2757 105/41 C1 INSIDE OUTSIDE 2993 2757 C

40 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Door Head/Transom Options Rebate C 2951 2959 C1 2990 105/67 C 2981 Open out door shown, Mirror illustration for open in door, with the exception of profiles 2981 & 2984 C1 INSIDE OUTSIDE 2982 2978 or 2984 (Dotted) 2983 2990 C

41 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Door Transom Options Rebate 2952 C1 2966 or 2967 (Dotted) 2953 2959 C1 2990 105/67 C1 2956 2983 Open out door shown, Mirror illustration for open in door, with the exception of profiles 2952, 2966 or 2967& 2996 C1 INSIDE OUTSIDE 2996 2983 2990 C1

42 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Door Cill Options Centre Pivot E E INSIDE OUTSIDE 2995 E 2756 105/196 2709 2994 E E

43 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Door Cill Options Rebate E E INSIDE OUTSIDE 2995 E 2756 105/196 2709 2994 E Open out door shown, Mirror illustration for open in door, with the exception of profile 2994 E

44 202 Non-thermally Broken Commercial Entrance Door & Framing * = opposite hand to that shown Standard Door Jamb Options Centre Pivot A 105/54 105/54 A A A* 2957 or 2997 (Dotted) 2956+ 2979 105/54 105/54 A 105/54 A 2976 2977 2951 2981 INSIDE OUTSIDE 2996 2954 A A A*

45 202 Non-thermally Broken Commercial Entrance Door & Framing Open in door shown, Mirror illustration for open out door, with the exception of profile 2996 Standard Door Jamb Options 105/54 Rebate INSIDE A A 2951+ 2959 105/67 A 2981+ 2990 * = opposite hand to that shown A A 105/67 OUTSIDE 105/54 2996 2983+ 2990 105/67 105/54 2956 2983+ 2990 105/67 A* A A*

46 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Fixed Frame Options Head 1 1 1 2951 2981 2997 2431 INSIDE OUTSIDE 2432 1 1 1 2956 2996 2266 2304 2430 1 2260 1 1 2 2997 2973

47 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Fixed Frame Options Transom 2966 or 2967 (Dotted) 2978 or 2984 (Dotted) 2997 2997 2952 2982 2953 2983 2954 2954 2431 2430 2260 2 2432 INSIDE 2 OUTSIDE 2 2 2956 2996 2266 2973 2958 2998 2267 2304

48 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Fixed Frame Options Mid rail 3 3 INSIDE OUTSIDE 2733/2734 2732/2733 3 2730/2731 3

49 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Fixed Frame Options Cill & Sub Cill 4 4 4 2966 or 2967 (Dotted) 2996 2994 (Shown) or 2964, 2965 2952 2994 2952 2978 or 2984 (Dotted) 2956 2994 (Shown) or 2964, 2965 2982 2994 2982 2966 or 2967 (Dotted) 2978 or 2984 (Dotted) 2705 2971 4 4 4 INSIDE OUTSIDE 4 2964 or 2965 (Dotted) 2964 or 2965 (Dotted) 4 Frame cill to line with top of door bottom rail * allowance = Typical *

50 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Fixed Frame Options Cill & Sub Cill 2432 4 4 4 2431 2430 2304 2260 2997 2266 2997 2964 or 2965 (Dotted) 2964 or 2965 (Dotted) 2432 4 4 4 INSIDE OUTSIDE 2431 2430 2304 2260 2997 2266 2997 2994 2994 2994 2964 or 2965 (Dotted) 4

202 Non-thermally Broken Commercial Entrance Door & Framing Standard Fixed Frame Options Jambs 5* * = opposite hand to that shown INSIDE 2304 2432 2260 2957 or 2997 (Dotted) 2951 2266 2431 2957 or 2997 (Dotted) 5 5 5 5 2430 2956 2996 2981 5 5 5 5 OUTSIDE 51

52 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Fixed Frame Options Mullion INSIDE 2953 2958 2304 2267 2432 2431 2954 6 6 6 6 6 OUTSIDE 6 2951 2956 2266 2983 2998 2954 2981 2260 6 2957 or 2997 2996 (Dotted) 2957 or 2997 (Dotted)

7 53 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Fixed Frame Options Corner Post 2954 2954 2983 7 INSIDE OUTSIDE Pressed aluminium corner in fill not supplied by Sapa 2961 2991 8011 2954 2953 2954 7 2961 2960 7 2953 8016 7 For bead glaze corner junctions apply 8016 or 8011 2963 7 * = opposite hand to that shown 105/67 2992 7* 7 2962

54 202 Non-thermally Broken Commercial Entrance Door & Framing Standard Fixed Frame Options 75mm Framing ii 8018 8017 INSIDE OUTSIDE 8021 ii i 8018 8019 i INSIDE 8018 8018 OUTSIDE ii ii i i

This page has been left intentionally blank 55

56 This page has been left intentionally blank

This page has been left intentionally blank 57

Our policy is one of continuous development and consequently we reserve the right to vary the products and their performance specification shown in this literature without notice. All products and systems which Sapa supply are supplied subject to Sapa s standard Terms and Conditions of Sale which may vary from time to time. This Technical Data Sheet is for specification guidance only. It should not be relied on for manufacturing or installation details which must instead be obtained from Sapa Building Systems Fabrication Manuals. For further assistance please contact one of our Project Consultants by calling the Marketing Department on the number below. Sapa Building Systems Limited. This data sheet is issued subject to the condition that it shall not be reproduced without the consent of Sapa Building Systems Limited in writing Brochure reference STC96 1207 Sapa Building Systems Limited Postal address Alexandra Way, Ashchurch, Tewkesbury, Gloucestershire GL20 8NB Telephone 01684 853500 Fax 01684 851850 E-mail info@sapabuildingsystems.co.uk Website www.sapabuildingsystems.co.uk