Series 456 Commercial Awning Window

Transcription

1 Commercial Awning Window COMMERCIAL SERIES Photo courtesy of Hanlon Windows Australia DATE: MAY 2013 REPLACES: MARCH 2008

2 COMMERCIAL SERIES KEY FEATURES/PERFORMANCE CHARACTERISTICS Scale: not to scale Residential awning sashes inlaid directly into shopfront framing. Dedicated head and sill to accept awning sashes with manual chain winders and Standard 30mm or alternative 44mm nailing fin jambs. We also have a double glazed 44mm nailing fin frame for those projects with double glazed fixed highlights or lowlights. Complies with AS 2047, with a high water resistance of 450Pa. Has a very low air infiltration that makes this product suitable for air conditioned buildings. Besides the standard manual chain winders, the awning sashes can be fitted with concealed electric chain winders or cam handles. Flyscreens can be fitted behind awning sashes with winders as shown below. Wrap around light sashes will accept glass up to 6.76mm thick. We also have wrap around sashes that will accept 20mm IGU's. The heavy duty beaded sash will accept glass from 4mm to 20mm thick as shown below. Commercial Awning Window. External view. Maximum Panel Height* Maximum Panel Width* Maximum Glass Thickness 2100mm 1210mm** 20mm * Subject to individual site conditions and wind loads. Contact AWS Technical Support for more information, [email protected] ** Over width awning sashes are available, contact local AWS sales office for details. 2D & 3D CAD Files Available To access 2D & 3D CAD models visit our online specifier resource centre MORE INFORMATION For the latest updates regarding this product visit our website

3 Sound Reduction A number of glass combinations have been tested with this system to acheive sound reduction numbers listed below. Glass Description 4mm Glass Rating STC 30 db 6.38mm Laminated glass Rw mm Laminated glass NOTE: The actual tests were carried out on a product very similar to this window (Series 514). STC 36 db Scale: not to scale HOW TO SPECIFY SYSTEM NAME Elevate Aluminium Systems Series 456 Commercial Awning Window FINISH Powder Coat Anodised COMMERCIAL SERIES WERS RATINGS Double Glazed Window ID Glass Type Uw SHGCw Tvw Inf AWS CPGy/8Ar/ AWS CPGy/8/ AWS CPClr/8Ar/ AWS CPClr/8/ AWS Sn/10Ar/ AWS Sn/10/ AWS SpGn/12/ AWS /8Ar/ AWS /08/ AWS /10/4ET COLOUR Select from the AWS range of approved powder coat or anodising colours GLASS Specify thickness 20mm Specify thermal performance where applicable (Uv & SHGC) Specify acoustic performance where applicable (RW) AWS /10Ar/4ET AWS SpGn/8Ar/5ET AWS Az/10/4ET AWS /10/ AWS /12Ar/3ET NOTES 1. Uw is the whole window U-value 2. SHGCw is the whole window solar heat gain coefficient 3. Tvw is the whole window visible (light) transmittance 4. Maximum air infiltration is 5.0L/s.m2 at a positive pressure difference of 75 Pa as measured according to AS Static performance (Uw SHGCw Tvw Tdw) calculated using Window 6.3 and Therm 6.3 software (LBNL), Results disclosed at Australian Fenestration Rating Council (AFRC) regulations. 7. Ratings for use with Section J of the Building Code of Australia - Class 2-9 For the latest WERS data for this system visit Specification Assistance Need help specifying this product? techsupport@ awsaustralia.com.au and our qualified technical advisors will assist you with product selection and specification for your project

4 COMMERCIAL SERIES Design Features The detail on this page shows the optional heavy duty beaded sash designed for exposed locations. This heavy duty sash is also suitable for full height awning sashes. Scale: not to scale As the sash is beaded it can be fitted with glass from 4mm to 20mm thick using the appropriate glazing bead.

5 Design Features Residential awning sashes inlaid directly into shopfront framing. Scale: not to scale COMMERCIAL SERIES Dedicated head and sill to accept awning sashes with manual chain winders and standard 30mm or alternative 44mm nailing fin jambs. We also have a double glazed 44mm nailing fin frame for those projects with double glazed fixed highlights or lowlights. Complies with AS2047, with a high water resistance of 450Pa. With a very low air infiltration that makes this product suitable for air-conditioned buildings. Besides the standard manual chain winders the awning sashes can be fitted with concealed electric chain winders or cam handles. Flyscreens can be fitted behind awning sashes with winders. Wrap around light sashes will accept glass up to 6.76mm thick, we also have wrap around sashes that will accept 20mm IGU s. The heavy duty beaded sash will accept glass from 4mm to 20mm thick. Fixed lowlights can be glazed from the inside in elevated situations by reversing the removable glazing beads. Fixed lights can be single or double glazed with glass up to 24mm thick. Nailing fin frame makes the product suitable for cavity brick and brick veneer construction. Dedicated 90 and 135 couplers. The illustration right shows the standard light wrap around sash option and manual chain winder sill. Nailing fin sub-sill standard on windows as shown right

6 COMMERCIAL SERIES DOUBLE GLAZED SASH AND FIXED LOWLIGHT 24mm Double glazed fixed with 20mm double glazed sash. We use a wider sash stop in the double glazed frame this allows us to run the double glazed jamb through sash and fixed area. The reason for the double glazed jamb is to accept the 24mm IGU s straight into lowlights and or highlights. We have two double glazed sashes : * & wrap around sash will accept 20mm IGU s. * & beaded sash will accept IGU s up to 20mm thick depending on the bead and roll-in wedge used. Scale: not to scale The standard sill with pocketed filler and transom adaptor. 450Pa water resistance. The double glazed unit nests neatly into transom, jambs and sill, giving a clean professional finish. Sub-sills are standard under windows. This detail shows our nailing fin sub-sill, designed specifically for brick veneer and cavity brick wall

7 SASH STRENGTH Window Light Sashes H.D. Sashes H.D. Sash Height Width & & type mm mm S U S U S U A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Wind Ratings (Pa) sash. Scale: not to scale S = Serviceability limit state (deflection = L/150). U = Ultimate strength limit state (factored yield strength = 104 MPa). These tables have been calculated using nominal section properties. A typical assembly has been tested as per the requirements of AS2047, Ultimate strength rating has been limited to 4500 Pa, 50% higher than the highest serviceability number nominated Serviceability ratings were restricted by the maximum water resistance (450Pa) achieved on this product. Blank Denotes rating under 500 Pa COMMERCIAL SERIES 2.433

8 COMMERCIAL SERIES HEAD AND SILL DETAILS WITH LIGHT SASH Head Scale: FULL SIZE We have a dedicated head section to allow the installation of awning window sashes fitted with manual chain winders into Series 400 CentreGLAZE framing. Built-in nailing fin on head, jambs and sub-sill make this window significantly more water proof and easier to install into brick veneer and cavity brick walls. Co-extruded Santoprene bulb seal. Light sashes will accept glass up to 6.76mm thick. Dedicated double glazed sashes and the beaded heavy duty sash will accept glass up to 20mm thick. Sill We have a dedicated sill section to allow the installation of awning window sashes with manual chain winders into Series 400 CentreGLAZE framing. Polesium cover and base manual chain winder comes with key locking as standard. The main feature with this winder is the corrosion resistant base and stainless steel chain. Both frame and sash reinforced at winder fixing positions. Important Note: Sub-sill standard under windows. CAD file: DWG 456.AWN.1

9 JAMB DETAILs WITH LIGHT SASH Scale: FULL SIZE COMMERCIAL SERIES Alternative 44mm jamb We have dedicated sections to allow the installation of awning window sashes intoseries 400 CentreGLAZE framing. Alternative 44mm CentreGLAZE Nailing fin frame illustrated left. Jamb adaptor can be clipped to any of the centre pocket CentreGLAZE frames including corners. Light wrap around sash illustrated. Standard 30mm jamb Standard 30mm CentreGLAZE Nailing fin frame illustrated left. This jamb shows the height adjustable galvanised building-in lug. used on cavity brick installations. CAD file: DWG 456.AWN

10 COMMERCIAL SERIES Scale: FULL SIZE HEAD AND SILL DETAILS WITH HEAVY DUTY BEADED SASH Head We have a dedicated head section to allow the installation of awning window sashes fitted with manual chain winders into CentreGLAZE shopfront framing. Built-in nailing fin on head, jambs and sub-sill make this window significantly more water proof and easier to install into brick veneer and cavity brick walls. Co-extruded Santoprene bulb seal. Heavy duty sash illustrated will accept glass up to 20mm thick. Flyscreen location. Sill We have a dedicated sill section to allow the installation of awning window sashes with manual chain winders into Series 400 CentreGLAZE framing. Polesium manual chain winder comes with key locking as standard. The main feature with this winder is the corrosion resistant base and stainless steel chain. Both frame and sash reinforced at winder fixing positions. Important Note: Sub-sill standard under windows. CAD file: DWG 456.AWN.1

11 JAMB DETAILS WITH HEAVY DUTY BEADED SASH Scale: FULL SIZE COMMERCIAL SERIES We have dedicated sections to allow the installation of awning window sashes into CentreGLAZE shopfront framing. Alternative 44mm CentreGLAZE Nailing fin frame illustrated left. Jamb adaptor can be clipped to any of the centre pocket CentreGLAZE frames including corners. Alternative 44mm jamb Heavy duty beaded sash illustrated. CAD file: DWG 456.AWN.1 Standard 30mm CentreGLAZE Nailing fin frame illustrated left. Standard 30mm jamb 2.437

12 COMMERCIAL SERIES SUB SILL Important Note: The nailing fin sub-sill is standard under awning windows. Scale: FULL SIZE Nailing fin jamb will accept galvanised building-in lug, these are ideal for cavity brick wall installation. Continuous run of caulking seals the sub-sill to sill. Timber reveal Sub-sill caps sealed to nailing fin jamb on both edges and at the nailing fin location. Sub-sill capped with custom moulded nylon stop ends.