Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com VS Flexible connections FEATURES Flexible low pressure and high pressure (220 bar/ 3190 psi) connections. Suitable for connecting cylinders or cylinder packs to ID Insert Deal manifolds or decompression units. Also suitable for generic connections of different devices together. Materials and design according to pressure and use. Cylinders connections complies with UNI standards, available DIN, NF and CGA connections on request. Available lengths 1 m and 2 m (39 in, 79 in).
SPECIFICATIONS Working temperature: -20 C +60 C (-4 F 140 F) for standard version Degree of protection: IP56 TYPES Chrome-plated copper flexible connection ø 8x4 (VS#A) External diameter 8 mm / internal diameter 4 mm (0,3/0,16 in) Maximum working pressure 220 bar (3190 psi) Connection from cylinder to manifold or to decompression unit Handle on cylinder side Length 1 m weight ~0,75 kg/ ~1,65 lb Length 2 m weight ~1,2 kg/ ~2,65 lb Stainless steel AISI 316L flexible connection (VS#M) Handle on cylinder side in AISI 304 External diameter 6 mm / internal diameter 4 mm (0,24/0,16 in) Maximum working pressure 220 bar (3190 psi) Connection from cylinder to manifold or to decompression unit Length 1 m Length 2 m weight ~0,6 kg/ ~1,3 lb weight ~0,74 kg/ ~1,65 lb Chrome-plated copper flexible connection ø 10x5 (VS#B) External diameter 10 mm / internal diameter 5 mm (0,4/0,2 in) Maximum working pressure 220 bar (3190 psi) Connection from manifold to decompression unit Handle on cylinder side Length 0,5 m Length 1 m Length 2 m weight ~0,7 kg/ ~1,55 lb weight ~0,75 kg/ ~1,65 lb weight ~1,3 kg/ ~2,86 lb Copyright ID Insert Deal S.r.l. - All rights reserved 2
TYPES Kevlar / AISI 304 double-braid flexible connection (VS#E/ VS#F) External diameter 13 mm / minimum internal diameter 4,2 mm (0,5/0,16 in) Maximum working pressure 220 bar (for standard version) Chrome-plated brass connections for VS#E version AISI 316 L/AISI 304 stainless steel connection for VS#F version Handle on cylinder side Safety cable PTFE Internal pipe AISI 304 stainless steel braid Parts in contact with the fluid for VS#F version are made of AISI 316L, PTFE and gaskets of PA 6.6 Length 1 m Length 2 m weight ~1 kg/ ~2,2 lb weight ~2 kg/ ~4,4 lb Flexible connection suitable for propane C3H8 - GPL (VS#L) Minimum internal diameter 5,5 mm (0,22 in) Maximum working pressure 30 bar (435 psi) Connections 1P - UNI11144 W20 x 1/14 SX F on both sides Steel braid, brass nuts Length 1 m Length 2 m weight ~0,4 kg/ ~0,88 lb weight ~1 kg/ ~2,2 lb Flexible connection suitable for C2H2 acetylene (VS#H) tabella versione Minimum internal diameter 3,5 mm (0,14 in) Maximum working pressure 15 bar (217 psi) Inlet connections: 7F - UNI11144 G 5/8 SX M 7S - UNI11144 bracket Manifold/ decompression unit connection W20 x 1/4 SX DIN 477 Nr. 3 Outlet connection: W20 x 1/14 SX Copyright ID Insert Deal S.r.l. - All rights reserved 3
TYPES Flexible connection suitable for NH3 ammonia (VS#G) Minimum internal diameter 3,8 mm (0,15 in) Maximum working pressure 50 bar (725 psi) 3 - UNI11144 W30 x 1/14 SX F connections on both sides Handle on cylinder side Safety cable PTFE pipe /Stainless steel braid Length 1 m Length 2 m weight ~1 kg/ ~2,2 lb weight ~1,3 kg/ ~2,8 lb Copyright ID Insert Deal S.r.l. - All rights reserved 4
available model types Serpentine Flexible Connections Serpentine di collegamento per alta pressione (max. 220 bar operativi) High-pressure flexible connections (max. 220 bar) Collegamento da bombola a norme UNI a rampa/quadro, in tubo di rame cromato ø 8x4 mm, attacchi in ottone cromato, maniglia lato bombola Chrome plated connectors from cylinder (according to Italian UNI standard) to manifold or decompression unit CYLINDER CONNECTION MANIFOLD CONNECTION CODE MEDIUM 2 - UNI 11144 2 - UNI 11144 VS CO2 - O2 1H - UNI 11144 1H - UNI 11144 VS H2 - CH4 5 - UNI 11144 2 - UNI 11144 VS N2 8 - UNI 11144 2 - UNI 11144 VS He - Ar - A/CO2 6 - UNI 11144 2 - UNI 11144 VS Aria 9 - UNI 11144 2 - UNI 11144 VS N2O CYLINDER CONNECTION MANIFOLD CONNECTION CODE MEDIUM 2 - UNI 11144 2 - UNI 11144 VS CO2 - O2 1H - UNI 11144 1H - UNI 11144 VS H2 - CH4 5 - UNI 11144 2 - UNI 11144 VS N2 8 - UNI 11144 2 - UNI 11144 VS He - Ar - A/CO2 6 - UNI 11144 2 - UNI 11144 VS Aria 9 - UNI 11144 2 - UNI 11144 VS N2O Disponibile con medesime caratteristiche nella versione in acciaio inossidabile AISI 316, diametro tubo 6x4 mm / Same features made of AISI 316 stainless steel, hose diameter 6x4 mm Collegamento da rampa a quadro in tubo rame cromato ø 10x5 mm, attacchi in ottone cromato Chrome plated connections from manifold to decompression unit Lunghezza 0,5 m / Lenght 0,5 m CONNECTION IN/OUT CODE MEDIUM 2 - UNI 11144 VS Gas inerti/comburenti-non flamable gas 1H - UNI 11144 VS Gas combustibili-flamable gas CONNECTION IN/OUT CODE 2 - UNI 11144 VS 1H - UNI 11144 VS CONNECTION IN/OUT CODE 2 - UNI 11144 VS 1H - UNI 11144 VS MEDIUM Gas inerti/comburenti-non flamable gas Gas combustibili-flamable gas MEDIUM Gas inerti/comburenti-non flamable gas Gas combustibili-flamable gas Collegamento da bombola a norme UNI a rampa / quadro in tubo flessibile rivestito da doppia treccia, inox + kevlar, attacchi in ottone cromato, maniglia lato bombola, cavetto di sicurezza Flexible connections from cylinder (according to Italian UNI standard) to manifold or decompression unit, double braid kevlar + AISI 304, inlet/outlet chrome plated brass connections CYLINDER CONNECTION MANIFOLD CONNECTION CODE MEDIUM 2 - UNI 11144 2 - UNI 11144 VS CO2 1H - UNI 11144 1H - UNI 11144 VS H2 - CH4 5 - UNI 11144 2 - UNI 11144 VS N2 8 - UNI 11144 2 - UNI 11144 VS He - Ar - A/CO2 6 - UNI 11144 2 - UNI 11144 VS Aria 9 - UNI 11144 2 - UNI 11144 VS N2O CYLINDER CONNECTION MANIFOLD CONNECTION CODE MEDIUM 2 - UNI 11144 2 - UNI 11144 VS CO2 1H - UNI 11144 1H - UNI 11144 VS H2 - CH4 5 - UNI 11144 2 - UNI 11144 VS N2 8 - UNI 11144 2 - UNI 11144 VS He - Ar - A/CO2 6 - UNI 11144 2 - UNI 11144 VS Aria 9 - UNI 11144 2 - UNI 11144 VS N2O Copyright ID Insert Deal S.r.l. - All rights reserved 5
available model types Serpentine Flexible Connections Serpentine di collegamento per bassa pressione Flexible connections for low pressure Collegamento per bombola PROPANO a norma UNI (PS=30 bar) Tubo flessibile TXc con rivestimento esterno in treccia acciaio zincato, attacchi in ottone, pressione di esercizio max 30 bar Flexible connections for PROPANE cylinder (according to Italian UNI standard) Flexible tube of TXc, galvanized steel braid, brass connections, 30 bar max working pressure 1P-UNI11144 VS#LBD01PI00 C3H8 1P-UNI11144 VS#LCD01PI00 C3H8 Collegamento da bombola ACETILENE (raccordo a staffa secondo norma UNI) a rampa/quadro (PS=15 bar) Tubo flessibile NYL431.6, interno PTFE, attacchi in ottone Flexible connections for ACETYLENE cylinder (bracket connections according to Italian UNI standard) Flexible tube NYL431.6, internal of PTFE, brass connections BOTTLE CONNECTION MANIFOLD CONNECTION CODE MEDIUM 7S-UNI11144 1H-UNI11144 VS#HBB0U7I00 C2H2 BOTTLE CONNECTION MANIFOLD CONNECTION CODE MEDIUM 7S-UNI11144 1H-UNI11144 VS#HCB0U7I00 C2H2 Collegamento da bombola ACETILENE (raccordo G 5/8 SX - M a norma UNI) a rampa/quadro (PS=15 bar) Tubo flessibile NYL431.6, interno PTFE, attacchi in ottone Flexible connections for ACETYLENE cylinder (connection G 5/8 SX - M UNI standard) to manifold or decompression unit Flexible tube NYL431.6, internal of PTFE, brass connections BOTTLE CONNECTION MANIFOLD CONNECTION CODE MEDIUM 7F-UNI11144 1H-UNI11144 VS#HBB010I00 C2H2 BOTTLE CONNECTION MANIFOLD CONNECTION CODE MEDIUM 7F-UNI11144 1H-UNI11144 VS#HCB010I00 C2H2 Collegamento da rampa ACETILENE a quadro acetilene (PS=15 bar) Tubo flessibile NYL431.6, interno PTFE, attacchi in ottone secondo 1H-UNI11144 Flexible connections from ACETYLENE manifold to decompression unit Flexible tube NYL431.6, PTFE internal parts, brass connections according to Italian standard 1H-UNI11144 1H-UNI11144 VS#HBB019I00 C2H2 1H-UNI11144 VS#HCB019I00 C2H2 Collegamento per bombola AMMONIACA a norma UNI (PS=50 bar) Tubo flessibile in PTFE, con rivestimento in treccia inox AISI 304, attacchi in acciaio al carbonio, maniglia lato bombola Flexible connections for AMMONIA cylinder (according to Italian UNI standard) to manifold Flexible tube of PTFE coated by stainless steel 304 net, connections of carbon steel, handle to the side of bottle 3-UNI11144 VS#GBE0U3I00 NH3 3-UNI11144 VS#GCE0U3I00 NH3 Copyright ID Insert Deal S.r.l. - All rights reserved 6
generating the product code SERPENTINE A B CC DD E FF A Materiale / Material A 8 x 4 rame cromato B 10 x 5 Rame cromato E Doppia treccia Kevlar /aisi 304 + codoli ottone F Doppia treccia Kevlar /aisi 304 + codoli inox G Singola treccia inox + PTFE per N3 H Tubo nylon 431.6- interno PTFE - codoli ottone L Tubo TXC 5/16per C3H8 M 6 x 4 inox B Lunghezza tubi / Pipes lenght A 0,5 mt B 1 mt C 2 mt CC Pressione ingresso / Inlet pressure B0 15 bar D0 30 bar E0 50 bar J0 220 bar DD Tipologia di fluido / Fluid type 10 Attacco 7F-UNI 11144 Codolo + dado x C2H2 19 Attacco rampa/quadro x C2H2 1P Attacco 1P-UNI 11144 U1 Attacco 1H-UNI 11144 U2 Attacco 2-UNI 11144 U3 Attacco 3-UNI 11144 U5 Attacco 5-UNI 11144 U6 Attacco 6-UNI 11144 U7 Attacco 7S-UNI 11144 Staffa x C2H2 U8 Attacco 8-UNI 11144 U9 Attacco 9-UNI 11144 E Marchiato / Marked I ID FF Accessori / Accessories 00 Nessun accessorio CODE COMPOSITION EXAMPLE VS# A B J0 U9 I 00 VS#: Flexible connections A: Chromed-plated copper, ø8x4 B: Length 1 m J0: Maximum working pressure 220 bar (3190 psi) U9: 9-UNI11144 (N2O) connections I: 00: No accessories Copyright ID Insert Deal S.r.l. - All rights reserved 7
technical drawings (all dimensions in [mm]) W20x1/14" SX 1H-UNI 11144 LATO BOMBOLA G 3/8 W24,5x1/14" W30x1/14" W21.7x1/14" 2-UNI 11144 5-UNI 11144 6-UNI 11144 8-UNI 11144 9-UNI 11144 LATO RAMPA/ QUADRO Ø155±5 CODICE LATO BOMBOLA LATO RAMPA/QUADRO U1 1H-UNI 11144 1H-UNI 11144 U2 2-UNI 11144 2-UNI 11144 U5 5-UNI 11144 2-UNI 11144 U6 6-UNI 11144 2-UNI 11144 U8 8-UNI 11144 2-UNI 11144 U9 9-UNI 11144 2-UNI 11144 ø8x4 COPPER Copyright ID Insert Deal S.r.l. - All rights reserved 8
technical drawings (all dimensions in [mm]) W20x1/14" SX 1H-UNI11144 LATO BOMBOLA 2-UNI11144 Ø155±5 W1x1/8" 4-UNI11144 W21.7x1/14" 5-UNI11144 LATO RAMPA/QUADRO W30x1/14" 6-UNI11144 8-UNI11144 CODICE LATO BOMBOLA LATO RAMPA/QUADRO U1 1H-UNI 11144 1H-UNI 11144 U2 2-UNI 11144 2-UNI 11144 U4 4-UNI 11144 2-UNI 11144 U5 5-UNI 11144 2-UNI 11144 U6 6-UNI 11144 2-UNI 11144 U8 8-UNI 11144 2-UNI 11144 U9 9-UNI 11144 2-UNI 11144 G 3/8 9-UNI11144 ø6x4 STAINLESS STEEL Copyright ID Insert Deal S.r.l. - All rights reserved 9
ID Insert Deal Srl Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com ID Insert Deal si riserva il diritto di cambiare le specifiche del prodotto senza preavviso. ID Insert Deal reserves the right to change and/or modify product specifications without prior notice. Insert Deal non si assume alcuna responsabilità per la scelta, uso e manutenzione di qualsiasi prodotto. La responsabilità per l idonea scelta, uso e manutenzione di qualsiasi prodotto ID rimane interamente a carico dell acquirente. Insert Deal does not assume responsibility for selection, use and maintenance of any products. Responsibility for proper selection, use and maintenance of any ID products remains entirely to the purchaser. Riproduzione vietata. Tutti i diritti riservati; nessuna parte del presente documento può essere riprodotta senza autorizzazione di ID Insert Deal Srl. Reproduction forbidden. All rights reserved; the hereby document can t be reproduced, also partially, without the authorization of ID Insert Deal Srl. (VS - VS_IT_00) Azienda con sistema di gestione qualità certificato. certificato N 50 100 9191 Company with certificated quality management system. certificate N 50 100 9191 Copyright ID Insert Deal S.r.l. - All rights reserved 10