catalogotaglio02 cuttingtools02 Frese in metallo duro Carbide end mills Frese in HSS HSS end mills
|
|
- Millicent Cross
- 8 years ago
- Views:
Transcription
1 9 Frese in metallo duro Carbide end mills Frese in HSS HSS end mills
2 Frese in metallo duro Carbide end mills Frese in HSS HSS end mills Frese in metallo duro Carbide end mills Frese per cave End mills for slot milling Description Page Tolerance Helix angle Flutes Coating Fresa standard per lavorazione di cave Standard end mill for slot milling TA h TiAlN da from 1,0 Fresa extra corta per lavorazione di cave; ottima per le cave di chiavette Stub length end mill for slot milling; recommended for tenon slots TA e TiAlN da from 1,0 a to 12,0 Frese per cave e finitura End mills for slot milling and for finishing operations Description Page Tolerance Helix angle Flutes Coating Fresa standard per lavorazione di cave e finiture Standard end mill for slot milling and for finishing operations Fresa standard per la lavorazione di cave e finiture, serie lunga Standard end mill for slot milling and for finishing operations, long series TA h TiAlN da from 2,0 TA h TiAlN da from 5,0 Frese per alluminio End mills for aluminum Description Page Tolerance Helix angle Flutes Coating Fresa specifica per alluminio, a passo differenziato dell elica, basse vibrazioni, ottima per cave dal pieno e per finiture End mill for aluminum, with variable helix angle, low vibrations; recommended for slot milling and for finishing operations TA h10 39 /40 /41 3,0 Lappato da from 3,0 Lapped 380
3 Frese in metallo duro Carbide end mills Frese per finitura End mills for finishing operations Description Page Tolerance Helix angle Flutes Coating Fresa standard per finiture Standard end mill for finishing operations TA h TiAlN da from 2,0 Fresa per super finiture End mill for super finishing operations TA h TiAlN da from 4,0 Fresa standard per finiture, serie lunga Standard end mill for finishing operations, long series TA h TiAlN da from 6,0 Frese a passo differenziato per sgrossatura e finitura End mills with variable helix angle for roughing and finishing operations Description Page Tolerance Helix angle Flutes Coating Fresa ad alto rendimento con passo differenziato dell elica, basse vibrazioni e alta qualità delle superfici; utilizzabile anche per cave High efficiency end mill with variable helix angle, low vibrations and improved surface finish; to be used for slot milling too TA h10 35 /38 4 Nano TiAlN da from 4,0 a to 25,0
4 Frese in metallo duro Carbide end mills Frese in HSS HSS end mills Frese in metallo duro Carbide end mills Frese per sgrossatura End mills for roughing Description Page Tolerance Helix angle Flutes Coating Fresa adatta solo per sgrossature End mill recommended for roughing only TA h TiAlN da from 6,0 Frese a testa semisferica Ball end mills Description Page Tolerance Helix angle Flutes Coating Fresa a testa semisferica per cave e copiature Ball end mill for slot milling and for copying TA h TiAlN da from 0,5 382
5 Frese in HSS-Co HSS Cobalt end mills Frese per cave End mills for slot milling Description Page Tolerance Helix angle Flutes Coating Fresa standard per lavorazione di cave Standard end mill for slot milling TA e8/h TiAlN da from 1,0 Frese per cave e finitura End mills for slot milling and for finishing operations Description Page Tolerance Helix angle Flutes Coating Fresa standard per cave e finiture Standard end mill for slot milling and for finishing operations TA e8/h TiAlN da from 3,0 Frese per finitura End mills for finishing operations Description Page Tolerance Helix angle Flutes Coating Fresa standard per finiture Standard end mill for finishing operations TA k /6 TiAlN da from 2,0 a to 25,0 Frese per sgrossatura End mills for roughing Description Page Tolerance Helix angle Flutes Coating Fresa in acciaio sinterizzato adatta solo per sgrossature Sintered steel end mill, recommended for roughing only TA k /5 TiAlN da from 6,0 a to 25,0
6 Frese in metallo duro Carbide end mills Fresa in M.D DIN 6527 L, rivestita TiAlN, elica 30, corta per cave, 2 taglienti Carbide end mill 1400 DIN 6527 L, TiAlN coated, 30 helix, jobber series for slot milling, 2 flutes TA TA TA TA TA TA TA TA TA TA TA TA TA TA TA TA TA TA TA TA TA Parametri di lavorazione a pag. 394 Speeds and feed information page 394
7 Fresa in M.D rivestita TiAlN, elica 30, extra corta per cave, attacco Weldon, 3 taglienti Carbide end mill 1402 TiAlN coated, 30 helix, stub series for slot milling, Weldon toolholder, 3 flutes TA TA TA TA TA TA TA TA TA TA TA TA TA TA TA TA TA Parametri di lavorazione a pag. 394 Speeds and feed information page 394
8 l 2 l 1 l 2 l 1 Frese in metallo duro Carbide end mills Fresa in M.D DIN 6527 L, rivestita TiAlN, elica 30, 3 taglienti Carbide end mill 1404 DIN 6527 L, TiAlN coated, 30 helix, 3 flutes d1 d2 d1 d2 TA TA TA TA TA TA TA TA TA TA TA Fresa in M.D rivestita TiAlN, serie lunga, elica 30, 3 taglienti Carbide end mill 1405 TiAlN coated, long series, 30 helix, 3 flutes TA TA TA TA TA TA TA Parametri di lavorazione a pag Speeds and feed information pages
9 Fresa in M.D elica 39 /40 /41, 3 taglienti, per sgrossatura e finitura di alluminio ad alti avanzamenti Carbide end mill /40 /41 helix, 3 flutes, for aluminum roughing and finishing at high speed rate d1 d2 l1 l2 l3 z TA TA TA TA TA TA TA TA TA Velocità di taglio per alluminio e leghe con silicio < 12% = 500 m/min Cutting speed for aluminum and alloys with silicon Velocità di taglio per alluminio e leghe con silicio > 12% = 500 m/min Cutting speed for aluminum and alloys with silicon Ap = 0,5 x d1 Fz Velocità Lunghezza Avanz. dente Avanz. dente Denti taglio utensile sgrossatura finitura Velocità Avanzamento Profondità passata max Teeth Cut Tool Tooth feed Tooth feed Speed Speed rate Max pass depth speed length rate roughing rate finishing Sgrossatura Finitura Cava Contornatura Roughing Finishing Slot Contouring mm/giro mm/min mm/giro mm/min Ap. max mm Ap. max mm mm/rev mm/min mm/rev mm/min Max Ap. mm Max Ap. mm Giri max macchina: Machine max revs:
10 Frese in metallo duro Carbide end mills Fresa in M.D DIN 6527 L, rivestita TiAlN, elica 30, 4 taglienti Carbide end mill 1407 DIN 6527 L, TiAlN coated, 30 helix, 4 flutes TA TA TA TA TA TA TA TA TA TA TA TA TA TA Fresa in M.D rivestita TiAlN, elica 30, serie lunga, 4 taglienti Carbide end mill 1410 TiAlN coated, 30 helix, long series, 4 flutes TA TA TA TA TA TA Parametri di lavorazione a pag Speeds and feed information pages
11 Fresa in M.D DIN 6527 L, rivestita Nano TiAlN, elica a passo differenziato 35-38, 4 taglienti Carbide end mill 1408 DIN 6527 L, Nano TiAlN coated, variable helix angle 35-38, 4 flutes TA TA TA TA TA TA TA TA q TA Fresa in M.D DIN 6527 L, rivestita TiAlN, elica 45, multitagliente Carbide end mill 1411 DIN 6527 L, TiAlN coated, helix 45, multi-flute TA TA TA TA TA TA TA TA Parametri di lavorazione a pag. 394 Speeds and feed information page 394
12 Frese in metallo duro Carbide end mills Fresa in M.D DIN 6527 L, rivestita TiAlN, elica 30, 4 taglienti, attacco Weldon, per sgrossatura Carbide end mill 1412 DIN 6527 L, TiAlN coated, helix 30, 4 flutes, Weldon toolholder, for roughing TA TA TA TA TA TA Fresa in M.D DIN 6527 L, rivestita TiAlN, sferica, elica 30, 2 taglienti Carbide end mill 1413 DIN 6527 L, TiAlN coated, ball end, helix 30, 2 flutes TA TA TA TA TA TA TA TA TA TA TA TA TA TA TA TA Parametri di lavorazione a pag. 394 Speeds and feed information page 394
13 Fresa in HSS-Co 1414 DIN 327 D, rivestita TiAlN, elica 30, 2 taglienti, attacco Weldon, per cave HSS-Co end mill 1414 DIN 327 D, TiAlN coated, helix 30, 2 flutes, Weldon toolholder, for slot milling Tolleranza Tolerance TA h TA h TA e TA e TA e TA h TA e TA h TA e TA h TA e TA h TA e TA h TA e TA h TA h TA h TA e TA h TA h TA h TA e TA h TA e TA h TA e TA h TA e TA h TA e Parametri di lavorazione a pag. 396 Speeds and feed information page 396
14 Frese in HSS HSS end mills Fresa in HSS-Co 1415 DIN 844 K, rivestita TiAlN, elica 30, 3 taglienti, attacco Weldon HSS-Co end mill 1415 DIN 844 K, TiAlN coated, helix 30, 3 flutes, Weldon toolholder Tolleranza Tolerance TA e TA e TA e TA e TA e TA e TA h TA e TA e TA e TA h TA e TA e TA e Parametri di lavorazione a pag. 396 Speeds and feed information page 396
15 Fresa in HSS-Co 1416 DIN 844 K, rivestita TiAlN, elica 30, 4/6 taglienti, attacco Weldon HSS-Co end mill 1416 DIN 844 K, TiAlN coated, helix 30, 4/6 flutes, Weldon toolholder TA TA TA TA TA TA TA TA TA TA TA TA TA TA TA Fresa in HSS-E-ASP 1417 DIN 844 K, acciaio sinterizzato rivestito TiAlN, 4/5 taglienti, attacco Weldon, per sgrossatura HSS-E-ASP end mill 1417 DIN 844 K, sintered steel TiAlN coated, 4/5 flutes, Weldon toolholder, for roughing TA TA TA TA TA TA TA TA TA TA TA Parametri di lavorazione a pag. 396 Speeds and feed information page 396
16 Frese in metallo duro Carbide end mills Frese in HSS HSS end mills Parametri di utilizzo User guide TA1400 TA1402 TA1404 Materiali Vc Avanzamento Vc Avanzamento Vc Avanzamento N/mm 2 Material groups m/min Feed rate m/min Feed rate m/min Feed rate Acciai da costruzione Structural steel Acciai automatici Free-cutting steel Acciai da bonifica non legati Non-alloy hardened and tempered steel Acciai da bonifica legati Alloy hardened and tempered steel Acciai da cementazione legati Alloy structural steel Acciai per utensili Tool steel Acciai super rapidi High speed steel Acciai inossidabili allo zolfo Sulphured stainless steel Acciai inossidabili austenitici Austenitic stainless steel Acciai inossidabili martensitici Martensitic stainless steel Acciai temprati Hardened steel Leghe speciali Special alloys Titanio e sue leghe Titanium and Ti-alloys Ghise Cast iron Ghise sferoidali Malleable cast iron Alluminio Aluminum Leghe di alluminio Si >10% Aluminum alloys Si >10% Leghe di alluminio Si <10% Aluminum alloys Si <10% Rame Copper Ottone a truciolo corto Short-chipping brass Ottone a truciolo lungo Long-chipping brass Bronzo a truciolo corto Short-chipping bronze Bronzo a truciolo lungo Long-chipping bronze > HRC Ap = Profondità di taglio Cutting depth Ae = Larghezza di taglio Cutting width D = Diametro fresa End mill s diameter Ap = 0,5xD Ae = 1xD Ap = 0,5xD Ae = 1xD Ap = 0,5xD Ae = 1xD Avanzamento (mm/giro) Feed rate (mm/rev)
17 TA1407 TA1408 TA1411 TA1412 TA1413 Vc Avanzamento Vc Avanzamento Vc Avanzamento Vc Avanzamento Vc Avanzamento m/min Feed rate m/min Feed rate m/min Feed rate m/min Feed rate m/min Feed rate Contornatura Contouring Ap = 1xD Ae = 0,1xD Ap = 0,5xD Ae = 1xD Contornatura Contouring Ap = 1,5xD Ae = 0,05xD Ap = 1xD Ae = 1xD Ap = 0,5xD Ae = 0,5xD Calcolo del numero di giri mandrino [min -1 ] Chuck revs calculation [min -1 ] n = numero giri mandrino [min -1 ] chuck revs [min -1 ] d = diametro della fresa [mm] end mill diameter [mm] = 3.14 Vc = Velocità di taglio [m/min] cutting speed [m/min] Calcolo dell avanzamento delle frese [mm/min] End mills feed rate calculation [mm/min] Vf = Fz * n * z Vf = avanzamento della fresa [mm/min] end mill feed rate [mm/min] Fz = avanzamento al dente [mm] feed rate per tooth [mm] n = numero giri mandrino chuck revs z = numero denti fresa end mill teeth
18 Frese in metallo duro Carbide end mills Frese in HSS HSS end mills Parametri di utilizzo User guide TA1405 TA1410 TA1414 Materiali Vc Avanzamento Vc Avanzamento Vc Avanzamento N/mm 2 Material groups m/min Feed rate m/min Feed rate m/min Feed rate Acciai da costruzione Structural steel Acciai automatici Free-cutting steel Acciai da bonifica non legati Non-alloy hardened and tempered steel Acciai da bonifica legati Alloy hardened and tempered steel Acciai da cementazione legati Alloy structural steel Acciai per utensili Tool steel Acciai super rapidi High speed steel Acciai inossidabili allo zolfo Sulphured stainless steel Acciai inossidabili austenitici Austenitic stainless steel Acciai inossidabili martensitici Martensitic stainless steel Acciai temprati Hardened steel Leghe speciali Special alloys Titanio e sue leghe Titanium and Ti-alloys Ghise Cast iron Ghise sferoidali Malleable cast iron Alluminio Aluminum Leghe di alluminio Si >10% Aluminum alloys Si >10% Leghe di alluminio Si <10% Aluminum alloys Si <10% Rame Copper Ottone a truciolo corto Short-chipping brass Ottone a truciolo lungo Long-chipping brass Bronzo a truciolo corto Short-chipping bronze Bronzo a truciolo lungo Long-chipping bronze > HRC Ap = Profondità di taglio Cutting depth Ae = Larghezza di taglio Cutting width D = Diametro fresa End mill s diameter Ap = 0,5xD Ae = 1xD Contornatura Contouring Ap = 1,5xD Ae = 0,1xD Ap = 0,5xD Ae = 1xD Avanzamento (mm/giro) Feed rate (mm/rev)
19 TA1415 TA1416 TA1417 Vc Avanzamento Vc Avanzamento Vc Avanzamento m/min Feed rate m/min Feed rate m/min Feed rate Ap = 0,5xD Ae = 1xD Contornatura Contouring Ap = 1xD Ae = 0,1xD Ap = 1xD Ae = 1xD Calcolo del numero di giri mandrino [min -1 ] Chuck revs calculation [min -1 ] n = numero giri mandrino [min -1 ] chuck revs [min -1 ] d = diametro della fresa [mm] end mill diameter [mm] = 3.14 Vc = Velocità di taglio [m/min] cutting speed [m/min] Calcolo dell avanzamento delle frese [mm/min] End mills feed rate calculation [mm/min] Vf = Fz * n * z Vf = avanzamento della fresa [mm/min] end mill feed rate [mm/min] Fz = avanzamento al dente [mm] feed rate per tooth [mm] n = numero giri mandrino chuck revs z = numero denti fresa end mill teeth
New Development Carbide Materials Neuentwicklung Hartmetall-Material Nuova sviluppo di materiali in metallo duro
22 New Development Carbide Materials Neuentwicklung Hartmetall-Material Nuova sviluppo di materiali in metallo duro Advantage PREALPINA INFINITY HSC END MILLS are made of carbide which is processed by
More informationThree Key Elements of a Cutting Tool
End Mill Training Three Key Elements of a Cutting Tool Geometry Cutting Tool 3 Elements Needed in a Good Cutting Tool Well Balanced For Best Performance Only Good as the Weakest Link End Mill Terms A -
More informationThink precision, Think HSS REAMING
Think precision, Think HSS REAMING SUMMARY REAMING TOOLS 2 Zoom on a reamer 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Types of bevel
More informationSerie Catalogo Metallo Duro
Serie Catalogo Metallo Duro FRESE IN METLLO DURO MICROGRN PER LVORIONI DI LLUMINIO, LEGHE LEGGERE, RME, E MTERIE PLSTICHE MICROGRIN CRBIDE END MILLS FOR LUMINIUM, LIGHT LLOYS, COPPER ND PLSTIC MTERIL copertina
More informationTHE INFLUENCE OF STEEL GRADE AND STEEL HARDNESS ON TOOL LIFE WHEN MILLING IN HARDENED TOOL STEEL
THE INFLUENCE OF STEEL GRADE AND STEEL HARDNESS ON TOOL LIFE WHEN MILLING IN HARDENED TOOL STEEL S. Gunnarsson, B. Högman and L. G. Nordh Uddeholm Tooling AB Research and Development 683 85 Hagfors Sweden
More informationCatalogoprodotti. productcatalogue. Made in Italy. torneria in lastra e taglio laser 3D
Catalogoprodotti productcatalogue torneria in lastra e taglio laser 3D Made in Italy 2 3 4 5 l evoluzione Nuova generazione taglio Laser 3D 3D di Casati: Taglio Laser 3D, tubo e piano di ultima generazione
More informationU-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42) R215.64. Long edge cutter 215.3 0.17 (0.10-0.20) R215.3 -AAH 0.12 (0.08-0.
General Turning PROFILING Feed recommendations Feed per tooth, fz (mm/tooth) Insert geometry Insert size Starting value (min.- max.) U-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42)
More informationHOBBING MACHINE TYPE ZFWZ 8000x40
Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth
More informationHigh speed machining and conventional die and mould machining
High speed machining and conventional die and mould machining Reprint from HSM - High Speed Machining There are a lot of questions about HSM today and many different, more or less complicated, definitions
More informationindexable Center Drill
Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining
More informationRAMAX S Prehardened stainless holder steel
T O O L S T E E L F A C T S RAMAX S Prehardened stainless holder steel Wherever tools are made Wherever tools are used This information is based on our present state of knowledge and is intended to provide
More informationPROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING
PROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING SECO PROVEN SOLUTIONS WILL IMPROVE YOUR PROCESS When you partner with Seco, our team of metalworking experts evaluate
More informationSolid End Mill Series
Solid End Mill Series Carbide material Now available! For automatic lathe New! 57 types, 52 descriptions Easy to use total length of 35mm and 45mm are available Solid End Mill Series Kyocera's solid end
More informationUTENSILI MULTIUSO FORANTI: SMT..
NEWS 215/4 UTENSILI MULTIUSO FORANTI: SMT.. ALL-PURPOSE DRILLING TOOLS: SMT.. 5 LAVORAZIONI, UN UNICO UTENSILE MACHINING OPERATIONS, ONE TOOL Utensili multiuso foranti All-purpose drilling tools Mehrzweck-Bohrwerkzeuge
More informationMilling. COPYRIGHT 2008, Seco Tools AB 1/111
Milling 1/111 2/111 Milling A simple choice! Experts required? No Just follow some basic rules. 3/111 Face milling 4/111 Square shoulder milling 5/111 Disc milling 6/111 Copy milling 7/111 Plunge milling
More informationChapter 2 Fractal Analysis in CNC End Milling
Chapter 2 Fractal Analysis in CNC End Milling Abstract This chapter deals with the fractal dimension modeling in CNC end milling operation. Milling operations are carried out for three different materials
More information8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles
8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles A. Schubert 1, O. Harpaz 2, B. Books 2, U. Eckert 1, R. Wertheim 1 1 Fraunhofer IWU, Reichenhainer Str. 88,
More informationMSS Monobloc holders for parting and grooving
MSS Monobloc holders for parting and grooving Easy, profitable and convincing 2 Monobloc tool holder, system GX, for inserts with two cutting edges, size GX24. Inexpensive solution for radial grooving,
More informationTurbine blade machining. Intelligent tooling solutions cutting your costs
Turbine blade machining Intelligent tooling solutions cutting your costs Your innovative partner We aim at improving the competitiveness of our customers by reducing the unit costs in the cutting processes.
More informationUDDEHOLM VANADIS 30 SUPERCLEAN
UDDEHOLM VANADIS 30 SUPERCLEAN UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder. This information is based on
More informationModule 3 Machinability. Version 2 ME, IIT Kharagpur
Module 3 Machinability Lesson 1 Cutting Tool Materials of common use Instructional Objectives At the end of this lesson, the students will be able to (i) Identify the needs and cite the chronological development
More informationTurbine blade machining Intelligent tooling solutions cutting your costs...
Turbine blade machining Intelligent tooling solutions cutting your costs... www.unimerco.com Tooling solutions for turbine blades Your innovative partner We aim at improving the competitiveness of our
More informationHIGH-PERFORMANCE REAMING. HORN-System DR. License. Modular Tooling System Ø 11.9-140.6 mm. In the UNITED STATES call us toll free 1-888 - 818 HORN
HIGH-PERFORMANCE REAMING R HORN-System DR License Modular Tooling System Ø 11.9-140.6 mm R1 R HIGH-PERFORMANCE REAMING INSERT type DR straight fluted Cutting edge Ø Ds 11.900-140.600 mm for through hole
More informationTooling concepts Gear milling
Tooling concepts Gear milling Complete gear-cutting solutions optimized for your needs About ninety percent of all gear wheel manufacturing involves metal cutting. Your main opportunities for rationalizing
More informationApplication Material Guide (AMG) Chart found on back cover 1-800-877-3745
Application Material Guide (AMG) Chart found on back cover Precision Dormer has expanded its range of high performance drills with the new. Manufactured with productivity and performance in mind, the HYDRA
More informationPrecision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationPRELIMINARY BROCHURE. Uddeholm Ramax HH
PRELIMINARY BROCHURE Uddeholm Ramax HH Uddeholm Ramax HH Uddeholm Ramax HH provides several benefits: The product offers uniform hardness in all dimensions combined with excellent indentation resistance.
More informationSerie ET / ET Series
Sensori di prossimità induttivi con campo di temperatura di lavoro esteso Extended working temperature range proximity inductive sensors Corpo in acciaio inox / stainless steel housing Modelli M12, M18
More informationAISI O1 Cold work tool steel
T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationCARPENTERIA METALLICA STEEL STRUCTURAL
CARPENTERIA METALLICA STEEL STRUCTURAL Dal 1973 al servizio del cliente L azienda opera nel settore della carpenteria metallica da oltre 30 anni collaborando sin dalla sua nascita con ditte a livello nazionale
More informationX15TN TM. A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS INNOVATION RESEARCH SERVICE.
TM A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS METALLURGICAL SPECIAL STEELS INNOVATION RESEARCH SERVICE DEVELOPMENT Enhancing your performance THE INDUSTRIAL ENVIRONMENT
More informationHigh speed steel Carbide tools Bud welded
Catalogus komcateng 01-2008 KIM Komeetstaal Postbus 51-7000 AB Doetinchem Fabriekstraat 42-7005 AR Doetinchem Tel: (0314) 343000 Fax: (0314) 332471 E-mail: info@komeetstaal.nl Site: www.komeetstaal.nl
More informationUddeholm Vanadis 4 Extra SuperClean. Uddeholm Vanadis 4 Extra SuperClean
Uddeholm Vanadis 4 Extra SuperClean 1 Uddeholm Vanadis 4 Extra SuperClean CONSISTENT TOOL PERFORMANCE LONG AND RELIABLE TOOL LIFE With an increased demand for just in time deliveries (JIT) and shorter
More informationMachining nickel alloys
NiDl Nickel Development Institute Machining nickel alloys A Nickel Development Institute Reference Book, Series N o 11 008 Table of Contents Acknowledgments... i Abbreviation key... i Introduction... ii
More informationSS-EN ISO 9001 SS-EN ISO 14001
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty of specific properties
More informationMilling Chuck Features
Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings
More informationNew LEGGERO E COMPATTO. MKL 800CES Plus. Cavo di gomma di 4m. Nuova costruzione del portaspazzole impedisce l accumulo della polvere
MKL 800CES Plus PROFESSIONAL LEGGERO E COMPATTO Cavo di gomma di 4m L ottimizzazione della ventilazione consente basse temperature di lavoro del motore Nuova costruzione del portaspazzole impedisce l accumulo
More information> Section 50 Alzatine Backsplashes
144 Section 50 > Upstands 145 Alzatina classica Classic backsplashes > in plastica Plastic backsplashes > Pag.148 Backplashes Serie 53 Serie 63 in alluminio Aluminium backsplashes > Pag.148 a Volpato Industrie
More informationexpanded metal on stock lamiera stirata in stock
expanded metal on stock lamiera stirata in stock Fratelli Mariani S.p.A. da 80 anni produce lamiera stirata e tela metallica. L azienda, di 0 dipendenti, ha la sua sede operativa a Cormano, alle porte
More informationINDICE INDEX. VITI A RICIRCOLO DI SFERE pp. 2-28. BALLSCREWS pp. 2-28. Tipo chiocciola: Nut type: PLANETARY ROLLERSCREWS pp. 29-56
INDICE INDEX VITI A RICIRCOO DI SFERE pp. - 8 chiocciola: BASCREWS pp. - 8 Nut : Singola flangiata TAB. pag. Singola flangiata precaricata TAB. S pag. 8 Doppia flangiata precaricata TAB. /3 pag. 16 Singola
More informationanalog SENSORI INDUTTIVI ANALOGICI inductive analog sensors
Sensori di prossimità induttivi con uscita analogica Inductive proximity sensors with analogue output a Caratteristiche principali Main features > Ampia scelta di dimensioni: M, M2 e M > Wide choice of
More information. Takım Tezgâhları: Planya, Freze ve İşlem Merkezleri
1. Takım Tezgâhları: Planya, Freze ve İşlem Merkezleri.1 Examples of Parts Produced Using the Machining Processes in the Chapter Figure 23.1 Typical parts and shapes produced with the machining processes
More informationIcon Glossary. Icon Glossary. Technical Information N N. Number of Flutes. Center Cutting. Lengths. Coatings. Helix Angle. Ball Nose.
Icon Glossary Z3 Number of Flutes aterial Center Cutting Coatings Lengths Iron pecial Icon Glossary ALtima TiAlN TiCN TiN Fordlube Hardened (35-65Rc) 30 Helix Angle Ball Nose Non-Ferrous N N Neck Relief
More informationDental Implants. You are correct, it is a labeling error. Here is your dental prosthesis!!!
Dental Implants You are correct, it is a labeling error. Here is your dental prosthesis!!! Manufacturing process of bridges, crowns, bone implants, fixtures, abutments. Manufacturing process of bridges,
More informationF 02 2-04-17 18.10 Sida F 2 HEAVY MACHINING F 2
HEAVY MACHINING 2 Table of contents HEAVY MACHINING Heavy turning Introduction Inserts Cutting data recommendations 4 5 9 Spare parts for HD cassettes 10 Technical information 11 Bar peeling Introduction
More informationMATERIALIZING VISIONS. Bohler-Uddeholm P20 Modified
MATERIALIZING VISIONS Bohler-Uddeholm P20 Modified General Bohler-Uddeholm P20 Modified is a Cr-Mo-alloyed steel which is supplied in the hardened and tempered condition. P20 Modified offers the following
More informationStainless steel flat products. Prodotti piani in acciaio inossidabile
St ai nl es ss t eel atpr oduc t s Moving ahead in the stainless sector. Within a strategy of consistent investments in its production chain, Marcegaglia has added the manufacturing of coils and sheets
More informationAdvantages and application of PCD and CBn tools
PCD and CBN tools Advantages and application of PCD and CBn tools Powerful and economical Tools with PCD and CBN cutting edges are the ideal solution for difficult-to machine, highly abrasive materials.
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationProgetto Ombra Milano propone un nuovo progetto dal design tutto italiano. Una SCALA di prestigio accessibile a tutti.
la crisi è la migliore benedizione che ci può accadere, tanto alle persone quanto ai paesi, poiché questa porta allo sviluppo personale e ai progressi. Crisis is the best blessing that could ever happen,
More informationPRELIMINARY BROCHURE. Uddeholm Corrax
PRELIMINARY BROCHURE Uddeholm Corrax Uddeholm Corrax Uddeholm Corrax stainless moulds steel has a unique set of properties that makes it the ultimate choice in a large number of demanding applications.
More informationSecolor Selection Guide. User s Manual. 2007-11-21 Seco Business Solutions SECO TOOLS AB, SWEDEN
Secolor Selection Guide User s Manual 2007-11-21 Seco Business Solutions SECO TOOLS AB, SWEDEN 1 INTRODUCTION...3 2 FEATURES...3 2.1 SEARCH FUNCTIONALITY...4 2.1.1 ISO / ANSI...4 2.1.2 Insert designation...4
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationHYDRAULIC PILING RIG
HYDRAULIC PILING RIG ATTREZZATURA IDRAULICA PER PALI TECHNICAL SPECIFICATIONS DATI TECNICI HYDRAULIC PILING RIG PILING PALI Max depth Profondità max 293 ft 89,3 m Max diameter Diametro max 118 in 3000
More informationCOATED CARBIDE. TiN. Al 2 O 3
COATED CARBIDE GENERAL INFORMATION CVD = Chemical Vapour Deposition coated grades GC2015, GC2025, GC2135, GC235, GC3005, GC3015, GC3020, GC3025, GC3115, GC4015, GC4025, GC4035, S05F, and CD1810. PVD =
More informationCOMPAX SUPREME Mold Quality Tool Steel
T OOL STEEL FACTS COMPAX Mold Quality Tool Steel Great Tooling Starts Here! 2 This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationColonna in estruso di alluminio leggera e di facile installazione Mast in aluminum very light and easy to install
Colonna in estruso di alluminio leggera e di facile installazione Mast in aluminum very light and easy to install Cesta di dimensioni appropriate per il trasporto dei componenti del ponteggio Basket with
More informationUDDEHOLM IMPAX SUPREME
UDDEHOLM IMPAX SUPREME Uddeholm Impax Supreme is a premium prehardened mould steel with very good polishing and texturing properties. Uddeholm Impax Supreme is available in a very wide dimensional range,
More informationPrediction of Surface Roughness in CNC Milling of Al7075 alloy: A case study of using 8mm slot mill cutter
Prediction of Surface Roughness in CNC Milling of Al7075 alloy: A case study of using 8mm slot mill cutter J. Kechagias, P. Kyratsis, K. Kitsakis and N. Mastorakis Abstract The current study investigates
More informationR u b i n e t t i s o t t o l a v a b o
R u b i n e t t i s o t t o l a v a b o A n g l e v a l v e s ART. 3000 / 3001 ART. 3025 / 3026 senza filtro out filter Rubinetto sottolavabo a vitone con filtro e dado (alto o basso) filter and nut (long
More informationvalvole 16 mm ad azion. meccanico e manuale mechanically and manually actuated valves - 16 mm
mechanically and manually actuated valves - 6 mm Valvole a spola 3/2-5/2 con attacchi filettati G/8 3/2-5/2 spool valves with G/8 threaded ports Spessore della valvola: 6 mm Valve thickness: 6 mm Installazione
More informationCARRELLI & SCAFFALI. trolley & shelves. SCOLAPIATTI Plate Rack. TELAI Frames. PORTABOTTIGLIE & PORTAPANE Pull-out Bottles Rack & Bread-Bag
SCOLAPIATTI Plate Rack TELAI Frames PORTABOTTIGLIE & PORTAPANE Pull-out Bottles Rack & Bread-Bag COLONNE ESTRAIBILI DISPENSE e RIPIANI Pull-out Columns, Unique Larder Units and Shelves PERIMETRI 3 e 4
More informationDESIGN OF ADAPTIVE MULTI TOOL ARBOR ATTACHMENT
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 6340(Print), ISSN 0976 6340 (Print) ISSN 0976 6359
More informationUDDEHOLM BALDER UDDEHOLM BALDER UDDEHOLM STEEL FOR INDEXABLE INSERT CUTTING TOOLS
UDDEHOLM BALDER Reliable and efficient steel is essential for good results. The same goes for achieving high productivity and high availability. When choosing the right steel many parameters must be considered,
More information1001 Business Center Drive Mount Prospect, IL 60056-2181 Toll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866
1001 Business Center Drive Mount Prospect, IL 60056-2181 oll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866 http://www.sumicarbide.com Sumitomo offers advanced milling, drilling, and hard
More informationGAS-Rp-NPSM-NPSF. Il prodotto: preciso, affidabile, curato e tutto by UFS The product: precise, reliable, accurate, all made by UFS PRECISION
-Rp-NPSM-NPSF Rp NPSM NPSF Il prodotto: preciso, affidabile, curato e tutto by UFS The product: precise, reliable, accurate, all made by UFS PRECISION Filettatura cilindrica Whitworth EN ISO 228 Whitworth-Rohrgewinde
More informationCutting force, Fc (N) ' 270. 100 110 120 130 Cutting speed (m/min)
159 Rake face Adhesion Rake face Nose wear Tool life = 50.2 min Nose wear Tool life = 30.9 min Figure 4.19 - Nose wear at the cutting edge of T4 coated carbide insert after machining Ti- 6Al-4V alloy with
More informationVARDEX. Vardex Advanced Threading Solutions. Thread Milling. Thread Turning
VA R D E X I n d u s t r i a l S o l u t i o n s 2011-2012 METRIC VARDEX Vardex Advanced Threading Solutions VARGUS Ltd. is a world leading developer, manufacturer and supplier of high-quality, precision
More informationMulti-function tools EcoCut & ProfileMaster
Multi-function tools EcoCut & ProfileMaster EN CEATIZIT secrets of success Secrets of success CEATIZIT is your partner for exceptional hard material solutions. Hard materials and tools from CEATIZIT -
More informationThe measuring of the hardness
The measuring of the hardness In the field of mechanics one often meets with the notion of "hardness", and in fact the hardness is a fundamental characteristic to determine whether a certain material is
More informationMachining recommendation for AMPCO and AMPCOLOY-alloys Compared to steel 1.7225
Machining recommendation for AMPCO and AMPCOLOY-alloys Compared to steel 1.7225 General guidelines The recommendations for the machining of AMPCO and AMPCOLOY materials are based on extensive tests made
More informationvalvole 16 mm ad azionamento pneumatico pneumatically piloted valves - 16 mm
valvole 6 mm ad azionamento pneumatico - 6 mm Valvole a spola 5/ con attacchi filettati G/8 (scarichi M5) 5/ spool valves with G/8 threaded ports (M5 exhaust ports) Spessore della valvola: 6 mm Valve thickness:
More informationUDDEHOLM ELMAX SUPERCLEAN
UDDEHOLM ELMAX SUPERCLEAN UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder. This information is based on our
More informationINCISIONI & STAMPE. www.dicreative.it
Catalogo INCISIONI & STAMPE www.dicreative.it stampa digitale / digitale printing stampa su tela 124 AGF GROUP stampa su marmo stampa su vetro stampa su ottone argentato 125 stampa digitale / digitale
More informationPN 10 - Art. A020 TIS PN 16 - Art. A021 TIS
- Art. A00 TIS - Art. A0 TIS SARACINESCA CUNEO GOMMATO / CORPO PIATTO / SHORT EN - SERIE DN G K D L H n-d b M S Peso Weight 0 0 0 0 -ø -ø 00. 0 0 -ø -ø 00. 0 -ø -ø. 0 00 0 -ø -ø. 0 0 0 0 -ø -ø. 0 00 -ø
More informationHow To Understand High Speed Machining
HIGH SPEED MACHINING (HSM) THE EFFECTIVE WAY OF MODERN CUTTING Pasko, R. - Przybylski, L. & Slodki, B. Rafal Pasko Eng., Research assistant. Lucjan Przybylski Prof. Eng., Cracow University of Technology,
More informationCUTTING TOOL TECHNOLOGY. 1. Tool life 2. Tool Materials 3. Tool Geometry 4. Cutting fluids
CUTTING TOOL TECHNOLOGY 1. Tool life 2. Tool Materials 3. Tool Geometry 4. Cutting fluids 1 Introduction Machining is accomplished by cutting tools. Cutting tools undergo high force and temperature and
More informationKOMET DIHART Reamax TS. Modular reaming system
KOMET DIHART Reamax TS Modular reaming system KOMET DIHART Reamax TS Modular reaming system Application: - All current materials - Through holes and blind bores - Small bore tolerances - Up to D - High
More informationSurface Roughness Prediction in Machining Castamide Material Using ANN
Acta Polytechnica Hungarica Vol. 8, No. 2, 2011 Surface Roughness Prediction in Machining Castamide Material Using ANN Şeref Aykut Department of Mechanical Engineering, Faculty of Engineering Architecture
More informationAdvance in Monitoring and Process Control of Surface Roughness Somkiat Tangjitsitcharoen and Siripong Damrongthaveesak
Advance in Monitoring and Process Control of Surface Roughness Somkiat Tangjitsitcharoen and Siripong Damrongthaveesak Abstract This paper presents an advance in monitoring and process control of surface
More informationHelical Gears K HG 1-20 R. Table of Contents. Catalog Number of KHK Stock Gears. Helical Gears. (Example) Direction of Helix (R) No.
Table of Contents Special Characteristics, Points of Caution in Selecting and Using... page 130 KHG Ground... page 134 SH... page 144 Catalog Number of KHK Stock Gears The Catalog Number for KHK stock
More informationcomprehensive training factory technical support on-site trouble shooting custom tool design
comprehensive training Increased productivity equals lower cost, improved profitability, and ultimately, survival of your business in today s competitive environment. The LMT Onsrud Performance Team will
More informationTUBE FILLING & PROCESS SOLUTIONS SERIE
TUBE FILLING & PROCESS SOLUTIONS SERIE Italiano English Telaio macchina, carter di protezione e quadro elettrico in acciaio inox satinato scotch brite. Macchina montata su piedini regolabili in altezza.
More informationDesign curato Attractive design DATI TECNICI/TECHNICAL PARAMETERS
60 61 Nessun elemento da assemblare No element to assemble DCF System (Distribuzione Costante della Forza) DCF System (Distribution Constant of Force) Abbattimento e rotazione calibrati reversibili Camber
More information64/S FR Miscelatore da incasso per lavabo, senza scarico. Concealed washbasin mixer, without waste.
38/39 Finiture raffinate in corpo minimal. 4ever miscela sapientemente forme squadrate dal taglio essenziale con i preziosismi e l impatto dell esclusivo disegno dorato. Una collezione al passo con le
More informationMAGGIORAZIONI PER IMPIANTI SPECIALI EXTRA CHARGES FOR KEYING ARRANGEMENTS pag. 12 D
08A1166_FIAM08 06 INFILARE CIL 20-09-2008 8:11 Pagina 77 INDICE CATEGORICO CATEGORIC INDEX pag. 2 A INDICE ANALITICO ANALYTIC INDEX pag. 4 B CONDIZIONI DI VENDITA SALES CONDITIONS pag. 10 C MAGGIORAZIONI
More informationArt. W 2. Incontro reversibile. Incontro c/aletta Striking plate for locks. Reversibile striking plate 82 M 70 M 68 M 79
Tagliapietra Cerniere per porta cristallo con supporto Hinges for crystal doors with hook Art. CE100 Art. CE300 Cerniera a pavimento semitonda Applicazione telaio legno o alluminio c/battuta mm 28/32x10*
More informationHYDRAULIC PILING RIG
HYDRAULIC PILING RIG ATTREZZATURA IDRAULICA PER PALI DIMENSIONS DIMENSIONI 45 45 Rotating jib Falchetto girevole Rotating mast Rotazione mast 3600-4900 TRANSPORT DIMENSIONS DIMENSIONI DI TRASPORTO 1120
More informationCutting Processes. Simulation Techniques in Manufacturing Technology Lecture 7
Cutting Processes Simulation Techniques in Manufacturing Technology Lecture 7 Laboratory for Machine Tools and Production Engineering Chair of Manufacturing Technology Prof. Dr.-Ing. Dr.-Ing. E.h. Dr.
More informationSTAVAX SUPREME. Stainless tool steel
STAVAX SUPREME Stainless tool steel General Demands placed on plastic mould tooling are increasing. Such conditions require mould steels that possess a unique combination of toughness, corrosion resistance
More informationproduzione di componenti di base per bigiotteria e accessori per la moda production of components for imitation jewellery and fashion accessories
1 pag. 2 pag. 3 pag. 4 pag. 5 pag. 6 pag. 7 pag. 8 pag. 9 pag. 10 pag. 11 pag. 12 pag. 13 pag. 14 pag. 15 pag. 16 pag. 17 pag. 18 pag. 19 pag. 20 pag. 21 pag. 22 2 nuovi collarini di filo elastico a spirale
More informationT-TOP IN ALLUMINIO UNIVERSALI (importazione USA) Adjustable Aluminium T-Top (made in USA)
T-TOP IN ALLUMINIO UNIVERSALI (importazione USA) Adjustable Aluminium T-Top (made in USA) T-TOP ART.363.00 T-TOP MOD.PICCOLO Registrable in larghezza universale Fornito di telo colore bianco o blu. Il
More informationw w w. a u t o s t e e l. o r g
Great Designs in Steel is Sponsored by: AK Steel Corporation, ArcelorMittal Dofasco, ArcelorMittal USA, Nucor Corporation, Severstal North America and United States Steel Corporation LIGHTWEIGHTING AUTOMOTIVE
More informationUddeholm Dievar is a specially developed steel grade by Uddeholm, which provides the best possible performance.
Uddeholm Dievar is a specially developed steel grade by Uddeholm, which provides the best possible performance. The chemical composition and the very latest in production technique make the property profile
More informationH = Altezza porta. 2 DOORS ASSEMBLING 3 DOORS ASSEMBLING Per porte rivestite in legno, si raccomanda di utilizzare pannelli o vetri opachi.
446 PORTE E CCESSORI PER MOBILI, RMDI E CBINE RMDIO PORTE DOORS + SPCE + GLIDER Per sistemi scorrevoli Space+ e Glider. Tutti i profili con taglio dritto, permettendo al cliente di tagliarli. Finiture:
More informationTable of contents BRAZED TURNING TOOLS. Toolholders H 2. Tips H 6. Rods H 8. Technical information H 9 H 1
Table of contents BRAZED TURNING TOOLS Toolholders 2 Tips 6 Rods 8 9 1 ISO External holders General turning External Ordering Tip According to ISO243-1975 (DIN 4982-198) h b l 1 f 1 f 2 a p r ε γ 1) λ
More informationMetal Injection Molded Parts
Metal Injection Molded Parts Metal Injection Molding (MIM) is a powder metallurgy process. he difference between MIM and conventional powder metallurgy is that in MIM, metal powder along with binders is
More informationLEEB HARDNESS TESTER TH130/132/134
LEEB HARDNESS TESTER TH130/132/134 Impact size, easy operation Wide measuring range in HLD, direct display of converted hardness values in, HRB, HRC,HRA,, HS High applicability, can be used for hardness
More informationolodoccia scorrevole sliding
S olodoccia scorrevole sliding Materiali e finiture - Materials and Finishing Vetro Trasparente lear Glass Vetro xtra-chiaro xtra-clear Glass Vetro fumè Fumè Glass Vetro serigr. LIN Serighr. LIN glass
More informationProduktkatalog (GB/IT)
www.abag.de info@abag.de 201003 Produktkatalog (GB/IT) Manometer und Zubehör Kompetenz für Anlagenbau, Betriebstechnik, Automatisierungstechnik, Globalservice Engineering und Serviceleistung Werksanschrift:
More information