Versa VS Machined Accent

Illumitex LEDs For architectural lighting designers, Illumitex LEDs inspire creativity with the ability to paint with light by delivering perfect uniformity precisely to the intended target. Illumitex s breakthrough optical innovation in our Artavi and Aduro LEDs allow for maximized light extraction directly from the LED die, creating the smallest possible LED package form factor. By directing photons in a precise beam pattern with perfect edge-to-edge color and light uniformity, Illumitex LEDs deliver the highest light levels directly to the desired target while consuming less energy. With Illumitex s patented Digital Distribution (DD) technology, 65% to 90% of the light produced from the LED die is controlled within the beam angle, delivering the sharpest cut-offs possible without the use of inefficient, secondary optics. 3

Versa VS Machined Accent The 2-inch diameter Versa VS is a low-voltage, machined-aluminum accent that delivers a CBCP of nearly 2500 candelas from only 2 watts using the Artavi LED and 500 candelas from 7 watts with the Aduro LED. The Versa VS is a great choice for lighting landscapes, ornamental trees, small statues and signs. MECHANICAL CONSTRUCTION Precision CNC machined from 6063-T6 aluminum. Stainless steel hardware and high-temperature silicone gaskets protect against the environment. Hand-tightening lock nut for easy aiming adjustability without tools. Threaded, machined lens ring allows for simple removal of lens for cleaning or for adding colored filters (red, green and blue filters included). ½-14 NPS stainless steel fitter for attachment to mounting accessories such as stakes and canopies (see pg. 26). Adjustable knuckle for vertical angle aiming. WEIGHT 0.8 lbs. TESTING AND COMPLIANCE ETL and cetl listed for wet locations -35 C to 40 C operating temperature range IP66 ingress protection rating L70 at 50,000 hours RoHS compliant 5-year warranty LEDs Single 50 Aduro VH or 10 Artavi LED in 3000K and 4000K CCT options. Aduro VH LED is recessed to provide a 36 beam. Illumitex s patented Digital Distribution delivers up to 90% of the lumens within the beam angle in a highly uniform, square pattern. ELECTRICAL Class 2, constant-current integral driver. 12VAC low-voltage input from standard AC landscape transformers (sold by others). 18 inches of twoconductor, 18-gauge low-voltage out wire provided. Two-step architectural anodized finish provides superior resistance to weather and fading. Available in black, bronze and clear. Shown with VMTWP2 mounting accessory.

DIMENSION LINE DRAWINGS PERFORMANCE DATA SERIES CCT CBCP LUMENS WATTAGE VS15 3000K 2,004 81 2.1 VS15 4000K 2,461 100 2.1 VS36 3000K 407 224 6.9 VS36 4000K 491 270 6.9 PART NUMBER ORDERING GUIDE VS 1 50 12 SERIES OPTICS # OF LEDs COLOR TEMP DRIVE CURRENT INPUT ANODIZED VS = Versa VS 15 = 15 Artavi 36 = 36 Aduro 1 = 1 LED BW = 3000K (82 CRI) DW = 4000K (78 CRI) 50 = 500mA 12 = 12VAC CA = Clear BK = Black BZ = Bronze 5

Versa VM Machined Accent The 2.5-inch diameter Versa VM Machined Accent is the single most versatile low-voltage landscape fixture available. Choose from four discrete light levels by simply twisting the dial. Add in three lens options and two shroud accessories to achieve 36 different fixture combinations within one package. The Versa VM CBCP measures up to nearly 4000 candelas, with 22 optic, using a maximum of 11.5 watts. The Versa VM is perfect for lighting landscapes, small trees, landmarks, columns and signs. MECHANICAL CONSTRUCTION Precision CNC machined from 6063-T6 aluminum. Stainless steel hardware and high-temperature silicone gaskets protect against the environment. Hand-tightening lock nut for easy aiming adjustability without tools. Threaded, machined lens ring allows for simple switching of lenses or adding colored filters (red, green and blue filters included). Machined aluminum barrel and long shroud options are included. ½-14 NPS stainless steel fitter for attachment to mounting accessories such as stakes and canopies (see pg. 26). Adjustable knuckle for vertical angle aiming. Two-step architectural anodized finish provides superior resistance to weather and fading. Available in black, bronze and clear. TESTING AND COMPLIANCE ETL and cetl listed for wet locations -35 C to 40 C operating temperature range IP66 ingress protection rating L70 at 50,000 hours RoHS compliant 5-year warranty LEDs The Versa VM uses a single Aduro VH LED in both 3000K and 4000K CCT options. Illumitex s patented Digital Distribution delivers 65% of the lumens within the beam angle in a highly uniform, square pattern. IP66 ingress protection rated against dust and water entry. Beam spreads include 22, 36 and 50 by means of individual, replaceable lenses. ELECTRICAL Proprietary, adjustable, integral driver provides four distinct light level options at 3, 6, 9 and 12 watts. 12VAC low-voltage input from standard AC landscape transformers (sold by others). 18 inches of twoconductor, 18-gauge low-voltage out wire provided. WEIGHT 1.8 lbs.

DIMENSION LINE DRAWINGS PERFORMANCE DATA SERIES OPTIC CCT CBCP LUMENS WATTAGE VMAI 22 3000K 864 1,507 2,596 3,251 VMAI 22 4000K 1,039 1,811 3,120 3,907 VMAI 36 3000K 302 539 915 1,148 VMAI 36 4000K 363 647 1,100 1,380 VMAI 50 3000K 164 294 507 641 VMAI 50 4000K 198 354 610 771 107 195 342 426 129 234 410 512 111 200 341 429 133 240 410 516 110 198 341 430 132 239 410 516 3.0 5.5 9.0 11.5 3.0 5.5 9.0 11.5 3.0 5.5 9.0 11.5 3.0 5.5 9.0 11.5 3.0 5.5 9.0 11.5 3.0 5.5 9.0 11.5 PART NUMBER ORDERING GUIDE VM AI 1 FA 12 SERIES OPTICS # OF LEDs COLOR TEMP DRIVE CURRENT INPUT ANODIZED VM = Versa VM AI = 22º, 36º, 50º All Inclusive 1 = 1 LED BW = 3000K (82 CRI) DW = 4000K (78 CRI) 740, 580, 330, 180mA Field Adjustable 12 = 12VAC CA = Clear BK = Black BZ = Bronze 7

Versa VL Machined Accent The largest and only line-voltage member of the Versa family, the 4-inch diameter Versa VL can deliver an incredible CBCP of nearly 17,000 candelas with only 18 watts using six Artavi LEDs, and more than 1800 candelas from 24 watts using four Aduro VH LEDs. This small flood is an excellent solution for lighting flags, large trees, columns and building facades. MECHANICAL CONSTRUCTION Precision CNC machined from 6063-T6 aluminum. Stainless steel hardware and high-temperature silicone gaskets protect against the environment. Hand-tightening lock nut for easy aiming adjustability without tools. ½-14 NPS stainless steel fitter for attachment to mounting accessories such as stakes and canopies (see pg. 26). Adjustable knuckle for vertical angle aiming. Long snoot available as an accessory. TESTING AND COMPLIANCE ETL and cetl listed for wet locations -35 C to 40 C operating temperature range IP66 ingress protection rating L70 at 50,000 hours RoHS compliant 5-year warranty LEDs Four 50 Aduro VH or six 15 Artavi LEDs in 3000K, 4000K and 5700K CCT options. Illumitex s patented Digital Distribution delivers up to 90% of the lumens within the beam angle in a highly uniform pattern. ELECTRICAL Class 2, constant current integral driver with 120-277VAC, 50/60Hz universal input. 18-gauge out wires provided. Two-step architectural anodized finish provides superior resistance to weather and fading. Available in black, bronze and clear. WEIGHT 4.1 lbs.

DIMENSION LINE DRAWINGS PERFORMANCE DATA SERIES CCT CBCP LUMENS WATTAGE VL15 3000K 12,024 488 18 VL15 4000K 14,766 574 18 VL15 5700K 16,833 654 18 VL50 3000K 1,560 1150 24.5 VL50 4000K 1,660 1280 24.5 VL50 5700K 1,892 1459 24.5 PART NUMBER ORDERING GUIDE VL U SERIES OPTICS # OF LEDs COLOR TEMP DRIVE CURRENT INPUT ANODIZED DIMMING SNOOT VL = Versa VL 15 = 15 Artavi 50 = 50 Aduro 4 = 4 LEDs 6 = 6 LEDs BW = 3000K (82 CRI) DW = 4000K (78 CRI) GW = 5700K (72 CRI) 70 = 700mA 45 = 450mA U = 120-277 VAC CA = Clear BK = Black BZ = Bronze D = 0-10V Dimmable Blank = No Dimming SNT = Snoot Blank = None *Artavi version is always 700mA with 6 LEDs **Aduro version is always 450mA with 4 LEDs 9

Verona 12 Machined Wall Mount The 2.3-inch diameter machined Verona 12 housing offers an architecturally pleasing style in up or down illumination. Multiple choices in LED create opportunities for various lighting effects. A CBCP of nearly 2400 candelas is delivered from only 2 watts using the Artavi LED and 450 candelas from 7 watts with the Aduro LED. MECHANICAL CONSTRUCTION Precision CNC machined from 6063-T6 aluminum. Stainless steel hardware and high-temperature silicone gaskets protect against the environment. Clear acrylic lenses are factory sealed. Die-cut, foam gasket provides a water-tight seal between the mounting plate and building surface. LEDs Single 50 Aduro VH or 15 Artavi LED in the Verona. 12 3000K CCT, 4000K CCT and blue LED options in both LED types. Illumitex s patented Digital Distribution delivers up to 90% of the lumens within the beam angle in a highly uniform, square pattern. WEIGHT 2.8 lbs. TESTING AND COMPLIANCE ETL and cetl listed for wet locations -35 C to 40 C operating temperature range IP66 ingress protection rating L70 at 50,000 hours RoHS compliant 5-year warranty ELECTRICAL Class 2, integral driver attached to the back of the 6-inch-square machined mounting plate recesses into a standard 4-inch-square junction box. 120-277VAC, 50/60Hz universal input. 18-gauge power and ground wires. Two-step architectural anodized finish provides superior resistance to weather and fading. Available in black, bronze, champagne and clear. Polished, clear finish is also available for inside use only.

DIMENSION LINE DRAWINGS PERFORMANCE DATA SERIES CCT CBCP LUMENS WATTAGE VR12AR 3000K 1,940 70 2 VR12AR 4000K 2,380 87 2 VR12AD 3000K 375 320 7 VR12AD 4000K 451 386 7 PART NUMBER ORDERING GUIDE VR1 2 U SERIES SIZE LED TYPE LED COLOR VOLTAGE ANODIZED VR1 = Verona 12 2 = 2.3 O.D. AD = Aduro AR = Artavi BW = 3000K (82 CRI) DW = 4000K (78 CRI) BL = Blue U = 120-277VAC CA = Clear BK = Black BZ = Bronze 11

Verona 22 Machined Wall Mount The 2.3-inch-diameter machined Verona 22 housing offers an architecturally pleasing style in both up-and-down or down-only illumination. Multiple choices in LED combinations create opportunities for various lighting effects. A CBCP of nearly 2400 candelas is delivered from only 2 watts using the Artavi LED and 450 candelas from 7 watts with the Aduro LED. MECHANICAL CONSTRUCTION Precision CNC machined from 6063-T6 aluminum. Stainless steel hardware and high-temperature silicone gaskets protect against the environment. Clear acrylic lenses are factory sealed. Die-cut, foam gasket provides a water-tight seal between the mounting plate and building surface. TESTING AND COMPLIANCE ETL and cetl listed for wet locations -35 C to 40 C operating temperature range IP66 ingress protection rating L70 at 50,000 hours RoHS compliant 5-year warranty LEDs Single 50 Aduro VH or 15 Artavi LED per side or a combination of both in the Verona 22. 3000K CCT, 4000K CCT and blue LED options in both LED types. Illumitex s patented Digital Distribution delivers up to 90% of the lumens within the beam angle in a highly uniform, square pattern. ELECTRICAL Class 2, integral driver attached to the back of the 6-inch-square machined mounting plate recesses into a standard 4-inch-square junction box. 120-277VAC, 50/60Hz universal input. 18-gauge power and ground wires. Two-step architectural anodized finish provides superior resistance to weather and fading. Available in black, bronze, champagne and clear. Polished, clear finish is also available for inside use only. WEIGHT 3.4 lbs.

DIMENSION LINE DRAWINGS PERFORMANCE DATA SERIES CCT CBCP LUMENS WATTAGE VR22AR 3000K 1,940 70 2 VR22AR 4000K 2,380 87 2 VR22AD 3000K 375 320 7 VR22AD 4000K 451 386 7 * Data is per direction (up or down). PART NUMBER ORDERING GUIDE VR2 2 U SERIES SIZE LED TYPE 1* LED COLOR 1* LED TYPE 2* LED COLOR 2* VOLTAGE VR2 = Verona 22 2 = 2.3 O.D. AD = Aduro AR = Artavi BW = 3000K (82 CRI) DW = 4000K (78 CRI) BL = Blue AD = Aduro AR = Artavi NO = None BW = 3000K (82 CRI) DW = 4000K (78 CRI) BL = Blue NO = None U = 120-277VAC ANODIZED CA = Clear BK = Black BZ = Bronze *LED TYPE 1 is for up lighting. LED TYPE 2 is for down lighting. 13

Verona 14 Machined Wall Mount The Verona 14 also provides up or down illumination options with a larger, 4-inch-diameter machined housing. Multiple choices in LED create opportunities for various lighting effects. The Verona 14 is also a great choice for accenting building façades or larger columns. MECHANICAL CONSTRUCTION Precision CNC machined from 6063-T6 aluminum. Stainless steel hardware and high-temperature silicone gaskets protect against the environment. Clear acrylic lenses are factory sealed. Die-cut, foam gasket provides a water-tight seal between the mounting plate and building surface. TESTING AND COMPLIANCE ETL and cetl listed for wet locations -35 C to 40 C operating temperature range IP66 ingress protection rating L70 at 50,000 hours RoHS compliant 5-year warranty LEDs 50 Aduro VH or 15 Artavi LEDs. 3000K CCT, 4000K CCT and blue LED options in both LED types. Illumitex s patented Digital Distribution delivers up to 90% of the lumens within the beam angle in a highly uniform, square pattern. ELECTRICAL Class 2, integral driver attached to the back of the 6-inch-square machined mounting plate. Driver recesses into a standard 4-inch-square junction box. 120-277VAC, 50/60Hz universal input. 18-gauge power and ground wires. Two-step architectural anodized finish provides superior resistance to weather and fading. Available in black, bronze, champagne and clear. Polished, clear finish is also available for inside use only. WEIGHT 4 lbs.

DIMENSION LINE DRAWINGS PERFORMANCE DATA SERIES CCT CBCP LUMENS WATTAGE VR14AR 3000K 12,024 488 18 VR14AR 4000K 14,766 574 18 VR14AD 3000K 1,100 960 25 VR14AD 4000K 1,300 1,150 25 PART NUMBER ORDERING GUIDE VR1 4 U SERIES SIZE LED TYPE LED COLOR VOLTAGE VR1 = 4 = 4 O.D. AD = Aduro BW = 3000K (82 CRI) U = Verona VR14 AR = Artavi DW = 4000K (78 CRI) 120-277VAC BL = Blue ANODIZED CA = Clear BK = Black BZ = Bronze 15

Verona 24 Machined Wall Mount The Verona 24 also provides up-and-down or down-only illumination options with a larger, 4-inch-diameter machined housing. Multiple choices in LED combinations create opportunities for various lighting effects. The Verona 24 is also a great choice for accenting building façades or larger columns. MECHANICAL CONSTRUCTION Precision CNC machined from 6063-T6 aluminum. Stainless steel hardware and high-temperature silicone gaskets protect against the environment. Clear acrylic lenses are factory sealed. Die-cut, foam gasket provides a water-tight seal between the mounting plate and building surface. TESTING AND COMPLIANCE ETL and cetl listed for wet locations -35 C to 40 C operating temperature range IP66 ingress protection rating L70 at 50,000 hours RoHS compliant 5-year warranty LEDs 50 Aduro VH or 15 Artavi LEDs or a combination of both. 3000K CCT, 4000K CCT and blue LED options in both LED types. Illumitex s patented Digital Distribution delivers up to 90% of the lumens within the beam angle in a highly uniform, square pattern. IP66 ingress protection rated against dust and water entry. ELECTRICAL Class 2, integral driver attached to the back of the 6-inch-square machined mounting plate. Driver recesses into a standard 4-inch square junction box. 120-277VAC, 50/60Hz universal input. 18-gauge power and ground wires. Two-step architectural anodized finish provides superior resistance to weather and fading. Available in black, bronze, champagne and clear. Polished, clear finish is also available for inside use only. WEIGHT 6.1 lbs.

DIMENSION LINE DRAWINGS PERFORMANCE DATA SERIES CCT CBCP LUMENS WATTAGE VR24AR 3000K 12,024 488 18 VR24AR 4000K 14,766 574 18 VR24AD 3000K 1,100 960 25 VR24AD 4000K 1,300 1,150 25 * Data is per direction (up or down). PART NUMBER ORDERING GUIDE VR2 4 U SERIES SIZE LED TYPE 1* LED COLOR 1* LED TYPE 2* LED COLOR 2* VOLTAGE VR2 = 4 = 4 O.D. AD = Aduro BW = 3000K (82 CRI) AD = Aduro BW = 3000K (82 CRI) U = Verona VR24 AR = Artavi DW = 4000K (78 CRI) AR = Artavi DW = 4000K (78 CRI) 120-277VAC BL = Blue NO = None BL = Blue NO = None ANODIZED CA = Clear BK = Black BZ = Bronze *LED TYPE 1 is for up lighting. LED TYPE 2 is for down lighting. 17

ProFlex 14 Architectural Flood The ProFlex 14 delivers an impressive CBCP of more than 12,000 candelas with only 14 LEDs. Equal to a 200-watt metal halide, ProFlex 14 uses 130 watts. MECHANICAL CONSTRUCTION The ProFlex face plate, end-caps and adjustable mounting arm assemblies are made from cast aluminum. An extruded aluminum heat sink is attached via a fabricated aluminum yoke and stainless steel hardware. Wiring compartments are sealed with high-temperature silicone gaskets. Adjustable knuckle for vertical aiming control. Available in 90 tenon, yoke, and straight tenon wall-mount options (see individual specification sheet, for more information). LEDs WEIGHT 31 lbs. TESTING AND COMPLIANCE ETL and cetl listed for wet locations -35 C to 40 C operating temperature range Vibration tested to ANSI C136.31 IP66 ingress protection rating L70 at 50,000 hours RoHS compliant DLC listed 5-year warranty Illumitex Aduro VH LEDs in 3000K, 4000K and 5700K CCT options. Illumitex s patented Digital Distribution delivers 65% of the lumens within the 50 beam angle in a highly uniform, square pattern. ELECTRICAL Class 1 integral driver. 120-277VAC and 347-480VAC universal input options, both 50/60Hz. 130 watts at 700mA constant current. Minimum power factor of 0.90. Three separate 18-gauge power input wires. Optional 0-10V dimming feature available. Casting finish is a thermoset, polyester powdercoat available in black, bronze, gray and white (consult factory for custom colors). Heat sink extrusion is a black, architectural anodized finish.

DIMENSION LINE DRAWINGS Shown with 90 tenon mount option. PERFORMANCE DATA SERIES CCT CBCP LUMENS WATTAGE PF 050 14 3000K 9,064 6,503 130 4000K 10,877 7,803 130 5700K 12,384 8,884 130 PF 100 14 3000K 4,425 6,437 130 4000K 5,310 7,724 130 5700K 6,045 8,793 130 PART NUMBER ORDERING GUIDE PF 14 SERIES BEAM ANGLE # OF LEDs COLOR TEMP INPUT VOLTAGE DIMMABILITY MOUNTING PF = ProFlex 050 = 50º x 50º 100 = 100º x 50º 14 = 14 Qty LEDs BW = 3000K (82 CRI) DW = 4000K (78 CRI) GW = 5700K (72 CRI) U = 120-270VAC H = 347-480VAC BK = Black BZ = Bronze GR = Gray WH = White N = Non-Dimmable D = Dimmable BLANK = 90 Tenon YKM = Yoke Mount STT = Straight Tenon Wall-Mount 19

ProFlex 21 Architectural Flood Using less than 200 watts, but comparable to a 300-watt metal halide, the ProFlex 21 broadcasts a CBCP of more than 18,000 candelas using 21 LEDs in a form slightly larger than its little brother. MECHANICAL CONSTRUCTION The ProFlex face plate, end-caps and adjustable mounting arm assemblies are made from cast aluminum. An extruded aluminum heat sink is attached via a fabricated aluminum yoke and stainless steel hardware. Wiring compartments are sealed with high-temperature silicone gaskets. Adjustable knuckle for vertical aiming control. Available in 90 tenon, yoke, and straight tenon wall-mount options (see individual specification sheet for more information). LEDs WEIGHT 37 lbs. TESTING AND COMPLIANCE ETL and cetl listed for wet locations -35 C to 40 C operating temperature range Vibration tested to ANSI C136.31 IP66 ingress protection rating L70 at 50,000 hours RoHS compliant DLC listed 5-year warranty Illumitex Aduro VH LEDs in 3000K, 4000K, and 5700K CCT options. Illumitex s patented Digital Distribution delivers 65% of the lumens within the 50 beam angle in a highly uniform, square pattern. ELECTRICAL Class 1 integral driver. 120-277VAC and 347-480VAC universal input options, both 50/60Hz. 190 watts at 700mA constant current. Minimum power factor of 0.90. Three separate 18-gauge power input wires. Optional 0-10V dimming feature available. Casting finish is a thermoset, polyester powdercoat available in black, bronze, gray and white (consult factory for custom colors). Heat sink extrusion is a black, architectural anodized finish. Shown with yoke mount option.

ProFlex 28 Architectural Flood This largest and most powerful member of the ProFlex family boasts an amazing CBCP of more than 24,000 candelas from 28 LEDs. Comparable to a 400-watt metal halide flood, but the ProFlex uses only 250 watts of energy. MECHANICAL CONSTRUCTION The ProFlex face plate, end-caps and adjustable mounting arm assemblies are made from cast aluminum. An extruded aluminum heat sink is attached via a fabricated aluminum yoke and stainless steel hardware. Wiring compartments are sealed with high-temperature silicone gaskets. Adjustable knuckle for vertical aiming control. Available in 90 tenon, yoke, and straight tenon wall-mount options (see individual specification sheet for more information). LEDs WEIGHT 44 lbs. TESTING AND COMPLIANCE ETL and cetl listed for wet locations -35 C to 40 C operating temperature range Vibration tested to ANSI C136.31 (bridge rated) IP66 ingress protection rating L70 at 50,000 hours RoHS compliant DLC listed 5-year warranty Illumitex Aduro VH LEDs in 3000K, 4000K, and 5700K CCT options. Illumitex s patented Digital Distribution delivers 65% of the lumens within the 50 beam angle in a highly uniform, square pattern. ELECTRICAL Class 1 integral driver. 120-277VAC and 347-480VAC universal input options, both 50/60Hz. 250 watts at 700mA constant current. Minimum power factor of 0.90. Three separate 18-gauge power input wires. Optional 0-10V dimming feature available. Casting finish is a thermoset, polyester powder-coat available in black, bronze, gray and white (consult factory for custom colors). Heat sink extrusion is a black, architectural anodized finish.

Corona CX Linear Flood The Corona CX linear LED flood offers 330 aiming adjustability and is an ideal solution for wall washing, wall grazing and sign-lighting applications. Up to 6200 candela CBCP. MECHANICAL CONSTRUCTION 3-inch O.D. extruded 6063-T6 aluminum housing and machined aluminum end cap assemblies with stainless steel hardware and high-temperature silicone gaskets. 6-inch diameter machined aluminum mounting bases with 0.84-inch O.D. x 6-inch-long aluminum stems standard (12-inch and 18-inch stems also available). LEDs Illumitex Aduro VH LEDs in 3000K, 4000K, and 5700K CCT options. Illumitex s patented Digital Distribution delivers 65% of the lumens within the 50 beam angle in a highly uniform, square pattern. IP66 ingress protection rated against dust and water entry. WEIGHT 15.4 lbs. Thermoset, polyester powder-coat finish available in black, bronze, gray and white (consult factory for custom colors). TESTING AND COMPLIANCE ETL and cetl listed for wet locations -35 C to 40 C operating temperature range IP66 ingress protection rating L70 at 50,000 hours RoHS compliant 5-year warranty ELECTRICAL Class 1 integral driver with 120-277VAC, 50/60Hz universal input. 75 watts at 700mA constant current. Minimum power factor of 0.90. SO power input cable with three separate, 18-gauge wires.

DIMENSION LINE DRAWINGS PERFORMANCE DATA SERIES CCT CBCP LUMENS WATTAGE CX148 3000K 4000K 5700K 4,545 5,488 6,260 3,623 4,375 4,990 75 75 75 PART NUMBER ORDERING GUIDE CX 1 6 U SERIES CX = Corona CX # OF BARS 1 = 1 Bar BAR # OF LEDs COLOR TEMP 24 = 24 Bar 48 = 48 Bar 4 = 4 Aduro LEDs 8 = 8 Aduro LEDs BW = 3000K (82 CRI) DW = 4000K (78 CRI) GW = 5700K (72 CRI) DIGITAL DIST. WATTAGE 6 = DD65 50 = 50W (4 LEDs) 75 = 75W (8 LEDs) INPUT VOLTAGE U = 120-270VAC POWDER COAT BK = Black BZ = Bronze GR = Gray WH = White DIMMING D = Dimmable 25

VERSA MOUNTING ACCESSORIES VMT002-8 VMTWP5 6in O.D. machined aluminum canopy with 0.84in O.D. stem. Aluminum coupler with 1/2-14 NPS fitter. VMTWP5-BK (Black powder coat) VMTWP5-BZ (Bronze powder coat) VMTWP5-SV (Silver powder coat) Add -6 for 6in stem. Add -12 for 12in stem. Add -18 for 18in stem. Add -T for 120VAC to 12VAC transformer. VMTWP2 6in O.D. machined aluminum canopy for single fixture. 1/2-14 NPS fitter. VMTWP2-BK (Black powder coat) VMTWP2-BZ (Bronze powder coat) VMTWP2-SV (Silver powder coat) Add -T for 120VAC to 12VAC transformer. VMTWP3 6in O.D. machined aluminum canopy for two fixtures. 1/2-14 NPS fitters. VMTWP3-BK (Black powder coat) VMTWP3-BZ (Bronze powder coat) VMTWP3-SV (Silver powder coat) Add -T for 120VAC to 12VAC transformer. VMTRP1 3in O.D. x 27 black PVC stake with cast aluminum cap. 1/2-14 NPS fitter. VMTRP1-BK (Black powder coat cap) VMTRP1-BZ (Bronze powder coat cap) Add -T for 120VAC to 12VAC transformer. 8in molded black plastic stake 1/2-14 NPS fitter. VMT003 9.5in x 6in x 4in deepcast aluminum junction box. 1/2-14 NPS fitter. VMT003-BK (Black powder coat) VMT003-BZ (Bronze powder coat) VMT004 3in O.D. cast aluminum canopy. 1/2-14 NPS fitter. VMT004-BK (Black powder coat) VMT004-BZ (Bronze powder coat) VMT005 4in O.D. cast aluminum canopy. 1/2-14 NPS fitter. VMT005-BK (Black powder coat) VMT005-BZ (Bronze powder coat) VMT007 4in square x 3.4in deep cast brass junction box. 1/2-14 NPS fitter.

NOTES 27

visit us at illumitex.com ILLUMITEX, INC 6301 E. STASSNEY LANE BLDG 6, STE. 400 AUSTIN, TX 78744 512.279.5020 (f)512.279.5030