DATA SHEET DEA GLOBAL SILVER 09.xx.08-12.xx.10
Classic Performance Advantage Application Field Top productivity for general metrology applications Top accuracy for point-to-point and scanning measurements Top accuracy and throughput for permanent process control Multisensor Technology Optional Standard Standard Temperature Compensation Optional CLIMA CLIMA CLIMA Performance Environment Standard: 18 22 C, 1 C/h, 2 C/24h Optional CLIMA: 16 26 C, 1 C/h, 5 C/24h Standard: 18 22 C, 1 C/h, 2 C/24h CLIMA: 16 26 C, 1 C/h, 5 C/24h Standard: 18 22 C, 1 C/h, 2 C/24h CLIMA: 16 26 C, 1 C/h, 5 C/24h Max. Scanning 300 mm/s 300 mm/s 500 mm/s Performance data are valid if the following specifications are met Standard Temperature Range 18 22 C Max. air temperature variation 1 C/h - 2 C/24h Max. Spatial Gradient 1 C/m CLIMA Temperature Range 16 26 C Max. air temperature variation 1 C/h - 5 C/24h Max. Spatial Gradient 1 C/m Probe Configuration for performance test TP: Standard force module, stylus length 10 mm, tip diameter 4 mm TESASTAR-p: Standard force, stylus length 10 mm, tip diameter 4 mm TESASTAR-mp: Standard Force Module, stylus length 10 mm, tip diameter 4 mm LSP-X1s: without extension, stylus length 50 mm, tip diameter 5 mm LSP-X1m/X1h: with an extension of 100 mm, stylus length 20 mm, tip diameter 5 mm LSP-X1c: stylus length 20 mm, tip diameter 5 mm /X5: stylus length 60 mm, tip diameter 5 mm 2 DEA GLOBAL SILVER 09.xx.08-12.xx.10 DS CMM 036/01 - EN - 11/12
Probe Heads and Sensors Technical Characteristics Angular rotation Angular rotation step Rotation speed Positioning repeatability Max. applied torque Extensions TESASTAR-sm Probe Head A axis: +90 / -115 B axis: ±1 5 90 in 2 seconds 0.5 μm 0.6 Nm Max. length 300 mm TESASTAR-m Indexable Probe Head Technical Characteristics LSP-X1c LSP-X5 Resolution <1 µm <1 µm <1 µm Measuring range ± 2 mm in X, Y and Z ± 1 mm in X, Y and Z 1 mm in X, Y and Z Overtravel range ± 2 mm in all axes ± 1.25 mm in all axes ± 1 mm in all axes Linear stiffness 1.2 N/mm 5 N/mm 5 N/mm Stylus joint M3 M5 M5 Max. stylus weight 33 g 150 g 500 g Max. stylus length Vertical: 20-115 mm Horizontal: up to 50 mm 360 mm 500 mm CMS106 Laser Sensor Technical Characteristics Laser Visible red, class 2, 690 nm Standoff and depth of FOV 170 ± 30 mm Width of FOV user selectable 24, 60, 124 mm Line per second (max) 53 Hz Temperature range of sensor for declared accuracy 15 ~ 32 C Sensor size L x W x H 134 x 72 x 60,5 mm Sensor weight 382 g Probing error (*) F(OT) 60 µm (*) According to VDI 2617 Part 6.2, October 5 edition DEA GLOBAL SILVER 09.xx.08-12.xx.10 DS CMM 036/01 - EN - 11/12 3
DEA GLOBAL Silver Classic 09.12.08, 09.15.08, : Strokes, Dimensions and s Specifications according to ISO 10360-2:1, second edition and ISO 10360-4:0 first edition Probe Configuration Standard Temperature Range 18 22 C CLIMA Temperature Range 16 26 C (mm/s) Accel. (mm/s 2 ) TS-m, TS-sm/TS-p, TS-mp, TP 2.7 + L/300 2.7 2.8 + L/250 2.7 1 TS-m, TS-sm/LSP-X1s, m, h + L/300 3.9/68 2.5 + L/250 3.9/68 1 LSP-X1c + L/300 3.9/68 2.5 + L/250 3.9/68 156 LX 100 140 Y 09.12.08 LZ 156 Z 275 140 09.15.08 DZ1 230 DZ SY1 SY2 PY LY 160 66 860 X LX1 60 101.5 111 92.5 68.5 32.4 75.4 56.4 LSP-X1c TESASTAR-m TESASTAR-sm Models Strokes Overall Dimensions X Y Z LX LX1 LY LZ Surface Plate Daylights Supports Thd Insert PY DZ DZ1 SY1 SY2 Max. Part CMM 09.12.08 09.15.08 0 2165 2465 2965 2 2 2 1910 2210 2710 455 540 6 1130 1350 100.6 24.4 50.6 1 1650 1850 4 DEA GLOBAL SILVER 09.xx.08-12.xx.10 DS CMM 036/01 - EN - 11/12
DEA GLOBAL Silver Performance 09.12.08, 09.15.08, : Strokes, Dimensions and s Specifications according to ISO 10360-2:1, second edition and ISO 10360-4:0 first edition Probe Configuration Standard Temperature Range 18 22 C CLIMA Temperature Range 16 26 C (mm/s) Accel. (mm/s 2 ) TS-m, TS-sm/TS-p, TS-mp 2.1 + L/333 2.0 2.4 + L/250 2.0 1 TS-m, TS-sm/TP 1.9 + L/333 1.9 2.1 + L/250 1.9 1 TS-m, TS-sm/LSP-X1s, m, h + L/333 2.9/45 2.1 + L/250 2.9/45 1 + L/333 2.9/45 2.1 + L/250 2.9/45 140 156 LX Y LZ 156 Z SY1 SY2 PY LY 111 101 100 09.12.08 275 140 DZ1 230 DZ 09.15.08 160 860 66 X 60 LX1 92.5 32.4 68.5 75.4 56.4 TESASTAR-m TESASTAR-sm Models Strokes Overall Dimensions X Y Z LX LX1 LY LZ Surface Plate Daylights Supports Thd Insert PY DZ DZ1 SY1 SY2 Max. Part CMM 09.12.08 09.15.08 0 2165 2465 2965 2 2 2 1910 2210 2710 455 540 6 1130 1350 100.6 24.4 50.6 1 1650 1850 DEA GLOBAL SILVER 09.xx.08-12.xx.10 DS CMM 036/01 - EN - 11/12 5
DEA GLOBAL Silver Advantage 09.12.08, 09.15.08, : Strokes, Dimensions and s Specifications according to ISO 10360-2:1, second edition and ISO 10360-4:0 first edition Probe Configuration Standard Temperature Range 18 22 C CLIMA Temperature Range 16 26 C (mm/s) Accel. (mm/s 2 ) TS-m, TS-sm/TS-p, TS-mp 2.1 + L/333 2.0 2.4 + L/250 2.0 TS-m, TS-sm/TP 1.9 + L/333 1.9 2.1 + L/250 1.9 TS-m, TS-sm/LSP-X1s, m, h 1.4 + L/333 1.4 2.5/45 1.7 + L/250 1.4 2.5/45 /X5 1.4 + L/333 1.4 2.5/45 1.7 + L/250 1.4 2.5/45 LY LX Y Z LZ 2148 DZ1 PZ SY1 SY2 70 X 69 PY 910 25 LX1 56 196 196 75.4 56.4 32.4 101 267 91.5 TESASTAR-sm 09.15.08 09.12.08 111 92.5 68.5 191.5 ( a ) With LSP-X5 probe head, Z stroke = 665 mm TESASTAR-m LSP-X5 Models Strokes Overall Dimensions X Y Z (a) LX LX1 LY LZ Surface Plate Daylights Supports PY PZ DZ1 SY1 SY2 Thd Insert Max. Part CMM 09.12.08 1538 1457 2430 3066 2030 250 936 550 1100 76 2286 09.15.08 1538 1457 2730 3066 2330 250 936 600 51 2567 0 1538 1457 3230 3091 725 2830 275 936 126 1 3316 6 DEA GLOBAL SILVER 09.xx.08-12.xx.10 DS CMM 036/01 - EN - 11/12
DEA GLOBAL Silver Performance 12.15.10, 12.10, 12.30.10: Strokes, Dimensions and s Specifications according to ISO 10360-2:1, second edition and ISO 10360-4:0 first edition Probe Configuration Standard Temperature Range 18 22 C CLIMA Temperature Range 16 26 C (mm/s) Accel. (mm/s 2 ) TS-m, TS-sm/TS-p, TS-mp 2.7 + L/333 2.7 3.1 + L/ 2.7 433 TS-m, TS-sm/TP 2.5 + L/333 2.5 2.8 + L/ 2.5 433 TS-m, TS-sm/LSP-X1s, m, h 2.4 + L/333 2.4 4.7/45 2.8 + L/ 2.4 4.7/45 433 2.4 + L/333 2.4 4.7/45 2.8 + L/ 2.4 4.7/45 433 273 273 LX Y Z LZ SY1 SY2 PY LY 111 101 12.15.10 12.10 12.30.10 LZ1 PZ 150 DZ1 70 X 69 1210 25 7 56 92.5 68.5 75.4 56.4 66.5 32.4 66.5 TESASTAR-m TESASTAR-sm Models Strokes Overall Dimensions X Y Z LX LY LZ LZ1 Surface Plate Daylights Supports PY PZ DZ1 SY1 SY2 Thd Insert Max. Part CMM 12.15.10 20 3431 2307 625 24 290 3 650 149 1 3792 12.10 2 35 3406 2282 600 31 350 3 1630 149 5679 12.30.10 3000 43 3431 2307 625 39 3 3 19 24 7587 DEA GLOBAL SILVER 09.xx.08-12.xx.10 DS CMM 036/01 - EN - 11/12 7
DEA GLOBAL Silver Advantage 12.15.10, 12.10, 12.30.10: Strokes, Dimensions and s Specifications according to ISO 10360-2:1, second edition and ISO 10360-4:0 first edition Probe Configuration Standard Temperature Range 18 22 C CLIMA Temperature Range 16 26 C (mm/s) Accel. (mm/s 2 ) TS-m, TS-sm/TS-p, TS-mp 2.7 + L/333 2.6 3.1 + L/ 2.6 TS-m, TS-sm/TP 2.5 + L/333 2.8 + L/ TS-m, TS-sm/LSP-X1s, m, h 2.1 + L/333 3.1/45 2.5 + L/ 3.1/45 /X5 2.1 + L/333 3.1/45 2.5 + L/ 3.1/45 LX Y Z LZ1 PZ 150 DZ1 LZ SY1 SY2 PY LY 70 X 69 1210 25 7 56 273 273 75.4 56.4 32.4 101 66.5 66.5 TESASTAR-sm 12.15.10 12.10 12.30.10 111 92.5 68.5 191.5 ( a ) With LSP-X5 probe head, Z stroke =905 mm TESASTAR-m LSP-X5 Models Strokes Overall Dimensions X Y Z (a) LX LY LZ LZ1 Surface Plate Daylights Supports PY PZ DZ1 SY1 SY2 Thd Insert Max. Part CMM 12.15.10 20 3431 2307 625 24 290 3 650 149 1 3792 12.10 2 35 3406 2282 600 31 350 3 1630 149 5679 12.30.10 3000 43 3431 2307 625 39 3 3 19 24 7587 DEA GLOBAL SILVER 09.xx.08-12.xx.10 DS CMM 036/01 - EN - 11/12 8
Performance Verification : Maximum Permissible Error of indication for size measurement Measurement of a set of 5 sizes, taken through two opposite probing points on two nominally parallel planes. The set of 5 sizes is placed in 7 different positions/directions within the measuring volume. Each size is measured three times for a total of 105 measurements. All 105 measurement results (100%) must be within the specified. : Maximum permissible probing error A reference sphere is measured with 25 equally distributed probings. The probing performance shall be verified in one single position, located in the middle of the CMM working volume. Using all 25 measurements, compute the Gaussian associated sphere. For each of the 25 measurements, calculate the Gaussian radial distance, R. Calculate the probing error, P, as the range of the 25 Gaussian distances, Rmax - Rmin. The probing error P must be within the stated. : Maximum permissible scanning probing error is the Maximum Permissible Scanning Probing Error of the range of all radii (sphere form error), with high point density and predefined path scanning, where τ is the specified time (in seconds) needed to perform the verification test. The scanning probing performance shall be verified in one single position, located in the middle of the CMM working volume. A reference sphere is measured by scanning four target scan lines to determine the range of the radial distance R. The scanning probing error THP is calculated as the range of radii between the measured centre and all of the assessed scan points. The measured THP and the time needed to perform the scanning test must be within the specified. Technical Characteristics Mechanical Frame: Surface Plate: Sliding System: Measuring System: Temperature Compensation: Ram Counterbalance: Air Supply: X: Micromachined anodized light alloy extrusion Y: Integral dovetail guideways, machined into the table Z: Micromachined anodized light alloy extrusion Material: Granite Part Locking: threaded inserts M8 x 1.25 Flatness: according to DIN 876/III Air bearings on all axes METALLUR linear scales. System Resolution: 0.039 μm CLIMA: Multisensor Temperature Compensation Technology, 16 26 C (optional on Classic models) Pneumatic, adjustable Minimum air supply pressure: 0.5 MPa Air consumption: 150 Nl/min Environment: Metrological specification temperature range: Standard: 18 22 C and CLIMA: 16 26 C Operating Temperature: 10 45 C Relative humidity: 20% - 90 % non condensing Probe Heads and Sensors: TESASTAR-m, TESASTAR-sm, LSP-X1c,, LSP-X5 TP, TESASTAR-p, TESASTAR-mp, LSP-X1, CMS106 DEA GLOBAL SILVER 09.xx.08-12.xx.10 DS CMM 036/01 - EN - 11/12 9
Laser Trackers & Stations Portable Measuring Arms BRIDge CMMs Horizontal Arm CMMs Gantry CMMs Multisensor & Optical Systems White light scanners Ultra High Accuracy CMMS sensors Precision Measuring Instruments Software Solutions Hexagon Metrology offers a comprehensive range of products and services for all industrial metrology applications in sectors such as automotive, aerospace, energy and medical. We support our customers with actionable measurement information along the complete life cycle of a product from development and design to production, assembly and final inspection. With more than 20 production facilities and 70 Precision Centers for service and demonstrations, and a network of over 100 distribution partners on five continents, we empower our customers to fully control their manufacturing processes, enhancing the quality of products and increasing efficiency in manufacturing plants around the world. Hexagon Metrology is part of Hexagon (Nordic exchange: HEXA B). Hexagon is a leading global provider of design, measurement and visualisation technologies that enable customers to design, measure and position objects, and process and present data. Learn more at www.hexagon.com For more information, visit www.hexagonmetrology.com 2012 Hexagon Metrology. Part of Hexagon 773179 All rights reserved. Due to continuing product development, Hexagon Metrology reserves the right to change product specifications without prior notice. Printed in Germany. June 2013