2. The scope of the conference is to present an analysis of the technical and economic status and provide an outlook on the future of the Hungarian foundry industry. Conference sites INVITATION TO THE 22 nd HUNGARIAN FOUNDRY DAYS October 18-20, 2013 HERCEGHALOM HOTEL ABACUS Gesztenyés út 3. www.abacus.hu Plenary, technical/scientific and informational presentations Milton Keynes I III Hall Concert and Traditional Foundry Men Evening Party Milton Keynes I III Hall Student section Milton Keynes III Hall Professional exhibition Lobby of Hotel ABACUS Plant tours (18 October, 2013) Csepel Metall Ltd, Budapest ECSERI Ltd, Szolnok Magyarmet Ltd, Bicske After the plant tours lunch is offered for all conference participants at Hotel ABACUS ***** Accomodation and boarding during the conference is at Hotel ABACUS Parking possibilities are at Hotel Abacus and around the hotel at the free outdoor parking places
09 00 19 00 Registration 3. PROGRAM ON FRIDAY, October 18, 2013 Location: 4. PROGRAM ON FRIDAY, October 18, 2013 Hotel ABACUS, Lobby 09 00 19 00 Registration 10 00 13 30 Professional presentations on the secondary level foundry education Presentations, Aluminium casting Chairman: János Rendesi, NEMAK Győr Ltd Conference Room: Milton Keynes I III Hall and outside of the Hotel 15 30 Opening ceremony of the Exhibition Opening speech: Dr. Lengyel, Károly, secretary general of the Hungarian Mining and Metallurgical Society 10 10 10 30 Rákóczi, T Sován, K, Lukács Polytechnik Scool: Overview of the Hungarian secondary foundry education 10 30 10 50 Pintér, J R, Nemak Győr Ltd: Using 4D simulation to improve casting production for the automotive industry 10 50 11 10 Győri, I, Magyarmet Group: There is no future without casting 11 10 13 30 Aluminium casting and moulding live demonstration with the participation of the audience The lecture is held by the teachers and students of the Miskolc University Foundry Department *** EXHIBITORS ALUINVENT PLC (H) ANTAMIK Ltd (H) EBA METALLURGIE Ltd (H) HÜTTENES-ALBERTUS CHEMISCHE WERKE GmbH (D) INDUCTOTHERM EUROPE Ltd (UK) MORGAN ADVANCED MATERIAL (UK) TEN SLOVAKIA s.r.o (ESI Group) (SK)
5. Eddig PROGRAM ON FRIDAY, October 18, 2013 15 45 18 00 Opening of the Conference, plenary presentations Chairman: Dr Hatala, Pál Conference Room: Milton Keynes I - III Hall Presidental speech: Dr Sohajda, József, president of the Association of Hungarian Foundries Welcome speeches: Dr Nagy, Lajos, president of Hungarian Mining and Metallurgical Societies Jenő Radetzky, president of Chamber of Commerce and Industry of Fejér County László Erdősi, major of city Herceghalom 15 45 16 15 Braun, Zsolt, NEMAK Győr Ltd: Trends and challenges in aluminum cylinder head production 16 15 16 45 Barnett, Stephen, Magyarmet Group: Does technology shape the market or does the market shape the technology 16 45 17 15 Stefan Toth Rákoczi Johan Johansson, Sucaba Ltd: Steer your business with Oracle Enterprise Performance Management 17 15 17 45 Dr Gácsi, Zoltán, Miskolc University: Short and long term actions of continuance the foundry education at the University of Miskolc 18 00 19 45 Dinner 19 45 20 15 Welcome drink before the cultural program Hosts: The organisers Association of Hungarian Foundries and Hungarian Mining and Metallurgical Society 20 30 22 00 Cultural program Location: Milton Keynes I III Hall The Gábor Majsai Orchestra Evergreens from the 50s until the end of 90s 09 00 19 00 Registration 6. PROGRAM ON SATURDAY, October 19, 2013 09 00 12 00 Informational and professional presentations Chairmen: Dr Vigh, László Conference Room: Milton Keynes I II Hall 09 00 9 20 Selmeczi, I, Öntőgépszerviz Ltd: The NOX process by IDRA 09 20 09 50 Ludescher, F - Boehm, R, HA GmbH: The Cordis Inorganic Bindersystem 09 50 10 10 Dr Fegyverneki, Gy. Braun, Zs. Juhász, V. Rigó, N., Nemak Győr Ltd: "TSPP" casting process development at Nemak Győr Ltd 10 10 10 30 Rákóczi, T. Sován, K., Lukács Polytechnic School, Győr: Overview of the Hungarian secondary foundry education 10 30 10 45 Break 10 45 11 05 Kolda, V Krutis, V Kovác, M, MECÁS ESI s.r.o.: ESI casting solution for automotive industry 11 05 11 25 Dr Babcsán, N Stiber. S Számel, Gy Sóki, P Beke, S Makk, P - Fejes, A - ALUINVENT Ltd: Aluminium foam castings 11 25 11 45 Dr Dúl, R, CFD Engineering Hungary Török, R - Dr Fegyverneki, Gy Braun, Zs, Nemak Győr Kft.: Development of Cooling Technology of Cylinder Head Castings with Computational Fluid Dynamics Simulations 11 45 12 05 Dr Röth, G, M BUSCH GmbH.: Producing vermicular graphite cast iron 12 05 12 25 Mrs Mende Tokár, M - Dr Fegyverneki, Gy - Dr Mertinger, V - Dr Dúl, J, Miskolci Egyetem: Examination of strontium and antimony cross-effects in AlSi9Cu3 foundry alloy 12 25 Lunch
7. PROGRAM ON SATURDAY, October 19, 2013 9 00 10 20 Informational and professional presentations Chairman: Dr Lukács, Sándor Conference Room: Milton Keynes I II Hall 9 00 9 20 Dr Rick, T, FÉMALK PLC: Keys to become a successful supplier in the automotive industry an example by a high pressure die casting company 9 20 9 40 Dr Szabó, R Nyeste, V Csősz, G, Prec-Cast Ltd Visteon Hungary Ltd: Simoultaneous Engineering activity between HVCC and Prec-Cast 9 40 10 00 Dr Molnár, D, FOUNDRY-SOLID Kft: Casting research and development using. computer simulation 10 00 10 20 Sándor, B, University Miskolc: Processing of al-si semi-solid casting alloy 10 00 10 20 Leskó Zs. Dr. Dúl J., Miskolci Egyetem: Wall thickness sensivity of high pressure die canstings 10 20 Break 10 30 12 30 Round table conference 12 30 Lunch The future of the foundry men tertiary education in Hungary Chairman: Dr Lengyel, Károly Conference Room: Milton Keynes Hall III. Commentaries by: Dr Gácsi, Zoltán Miskolc University Dr Dévényi, László, Budapest Technical University 8. PROGRAM ON SATURDAY, October 19, 2013 14 00 18 05 Informational and professional presentations Chairmen: Dr Pintér, Richárd Conference Room: Milton Keynes I - II Hall 14 30 15 00 Dr Lukács, S, ABM Kuprál Ltd: New possibilities of the CARO High Pressure Dies Casting plunger system 15 00 15 30 Hill, S Heavey, D, Inductotherm Europe Ltd: High-performance induction melting furnace 15 30 16 00 Benan Betik, Omega Foundry Machinery Ltd: Secondary attrition 16 00 16 30 Zsótér, Z, Morgan Advanced Material: Morgan thermal ceramix 16 30 16 45 Break 16 45 17 05 Sen Szalai, J. - Jun Szalai, J, PYROVEN Ltd.: The properties and production of wear resistant high chromium cast white irons 17 05 17 25 Dr Diószegi, A, School of Engineering, Jönköping University: Casting Defect Characterization by Color Metallography in Cast Iron 17 25 17 45 Dr Élesztős, P, ESI Group TEN Slovakia: High-tech methods in casting technologies 17 45 18 05 Császár, Cs, Nemak Győr Ltd: Core production capacity increase by cost minimization of investment and operation 18 05 Dinner 20 00 Traditional Foundry men evening party Location: Milton Keynes I III Hall
9. PROGRAM ON SATURDAY, October 19, 2013 14 30 18 00 Student Session Chairman: Dr Bakó, Károly Conference Room: Milton Keynes III Hall 14 00 14 10 Elnöki megnyitó 14 10 14 30 Gór, L, Miskolc University, BSc, 5th semester: Sand regeneration, analysis of sand core modifications 14 30 14 50 Madi, L, Miskolc University, BSc, 5th semester: évf.: Comparative analysis of resin-coated core collapsibility 14 50 15 10 Tatárka, E, Miskolc University, BSc, 5th semester: Liquidus temperature calculation in Sn-Bi-Cd system by ESTHPAD methods 15 10 15 30 Harsányi, G Erdőhegyi, Cs Miskolc University, BSc, 5th semester: Temperature ratio measurement of gravity die- and HPDC castings 15 30 15 50 Ádám, E Derekas, D Fügedi, G, Miskolc University, BSc, 5th semester: Manufacturing process development of heat-resistant steel casting 15 50 16 10 Break 16 10 16 30 Bíró, N, Miskolc University, BSc, 7th semester: Examination of AlSi melt purity and solidification characteristics 16 30 16 50 Kovács, Z, Miskolc University, BSc, 7th semester: Experiments on intensive controlled cooling processes of cylinder heads 16 50 17 10 Dargai, V, Miskolc University, MSc, 1st semester: Analysis of recirculated shell sands 17 10 17 30 Molnár, Zs, Miskolc University, MSc, 1st semester: The effect of vacuum treatment on the properties of HPD castings 17 50 Chairman summary and assessment 09 00 11 00 Registration 10. PROGRAM ON SUNDAY, October 20, 2013 09 00 12 10 Professional presentations Chairman: Dr Takács, Nándor Conference Room: Milton Keynes I II Hall 09 00 09 20 Szabó, E: Miskolc University: Influencing the life of the dies 09 20 09 40 Mrs Szilágyi, A Bíró, Miskolc University: Gas nitriding of dies 09 40 10 00 Simcsák, A,- Walczer, Cs, Kienle + Spiess Hungary Ltd: Improving electrical conductivity of pressure die-cast aluminium rotors by heat treatment 10 00 10 20 Berecz, T - Fodor, K: Csepel Metall Ltd, Ott, I, Beczkay, J: S&T Consulting Hungary Ltd: Company name: Cooperation of a traditional iron foundry and up-to-date computer technology 10 20 10 40 Break 10 40 11 00 Dr Dúl, J, FOUNDRY-SOLID Ltd: Product and production technology development of casting simulation 11 00 11 20 Török A, HŐKER Ltd: Development of over-pressured melt charging 11 20 11 40 Sándor, B, Miskolc University: Processing of Al-Si semi-solid casting alloy 11 40 12 00 Papp, S, Magyarmet Group: Production of complex-shaped investment castings using special core technologies 12 00 Closing session, closing speech Chairman: Dr Sohajda, József Conference Room: Milton Keynes I II Hall Lunch
11. Key Event sponsor MAGYARMET Group (H) *** Event sponsors ECSERI Ltd (H) FÉMALK PLC (H) INDUCTOTHERM EUROPE LTD (UK) NEMAK Győr Ltd (H) *** Sponsors 10 15-14 00 Plant tours Arriving individually to the pre-selected companies by no later than 10:15 a.m. Parking is available at the site. Please register with the local representative prior the tour. The tours start at 10:30 a.m. and are guided in Hungarian. 1. Csepel Metall Ltd Local host: László Érseki 2. ECSERI Ltd Local host: György Kuttor 3. Magyarmet Ltd Local host: Karlheinz Braisch After the plant tours lunch is offered for all conference participants at Hotel ABACUS starting at 12:30 p.m. Arrival: individually, free parking is available. ANTAMIK LTD (H) CSEPEL METALL LTD (H) ESI GROUP TEN SLOVAKIA (SK) HÜTTENES-ALBERTUS CHEMISCHE WERKE GMBH (D) K+K VAS LTD (H) L-DUPLEX PIVO ÖNTÖDE LTD (H) UNIVERSITY OF MISOLC, FACULTY OF MATERIAL SCIENCE AND ENGINEERING, FOUNDRY DEPARTMENT (H) SZEGEDI ÖNTÖDE KFT. (H) *****