The Function Introduction of InHand Cloud Service DN4.0
Version: V1.0 20140307 Copyright 2012-2013 All rights are reserved by Beijing InHand Network Technology Co., Ltd. and its licensors. Without the written permission of the Company, no unit or individual is allowed to excerpt, reproduce or transmit in any form part or all of the contents in the manual. owners. INHAND and InHand are trademarks of Beijing InHand Network Technology Co., Ltd. The trademarks of other companies, product logos and trade names in the manual are possessed by their respective The contents of this manual may be changed due to product version upgrade or other reasons. InHand reserves the right to modify the contents of this manual without any notice or prompt. This manual is only used as the guidance. InHand makes every effort to provide accurate information in this manual, but InHand does not guarantee that there is no error in the manual. All statements, information and recommendations in this manual do not constitute any express or implied warranty.
1. DN4 Platform Introduction DN4 platform is a set of useful and powerful management software product, it can provide practical and easy remote management and query service. Base on DN4, users can remotely upgrade, configure and query information of device, the operation is very easy. It makes the large quantities of device management very simple, convenient and fast. DN4 platform includes 7 modules, they are: Home, System, Reporting, Devices, Sites, Notifications and Tasks. The Web interface as shown in Figure 1-1 2. Login Figure 1-1 2.1 Registration Open the web browser, and input: http://g.inhandnetworks.com. Click on the upper right corner "registered" (red box position) began to register account, as shown in Figure 2-1 Figure 2-1
2.2 Login Open web browser, and input http://g.inhandnetworks.com. Click Email/password/ security code, as shown in Figure 2-2 2.3 Logout Figure 2-2 Click on the username behind Welcome, and then pop-up My Account dialog box, click Logout button to logout. As shown Figure 2-3 Figure 2-3 2.4 Manage My Account Click on the username behind Welcome, and then pop-up My Account dialog box, click Edit button to logout. As shown Figure 2-4
Figure 2-4 3. Configuration Management 3.1 Home Home includes two parts: Gateway Summary and Site Summary Gateway Summary: Summary gateways according to different classification (connection, operation status, model, network type). As shown Figure 3-1 Figure 3-1 Site Summary: Summary sites according to classification of connection and operation status. As shown in Figure 3-2
Figure 3-2 3.2 System System is used to finish user management, such as: add/delete users, add tags and so on. System includes three parts: Users, Roles and Tags. 3.2.1 Users Management On the page System->Users, you can add, delete and edit users. As shown in the Figure 3-3 Figure 3-3 Add new users: Click on the add button, fill the user s information in the pop-up dialog box, click Save button, then a new user has been created. Delete users: Select the username which you want to delete, and click delete butoon. Edit users: Click the line that a username is in, it turns green, on right side will pop up dialog box, there you can edit user s information.
3.2.2 Roles Management On the page System->Roles, you can view the detail information of roles. Now we support two kind of roles, they are super manager and device manager. Only the users with super manager role can create new user. Click on the line that role name is in, on the right side will show role s information, as shown in Figure 3-4 Figure 3-4 3.2.2 Group Management On the page System->Group management, you can view the detail information of Group management. The understanding of group: Only organization manager can manage the group; a group can bind multiple users; a users can be bond to multiple groups; users can access all devices and sites under the group to which it belongs, also can access those devices and sites which were not designed to a group, but can t access those devices and sites which belong to other groups; The users who were not designed to a group, only can access those devices and sites which also were not designed to a group. As shown in the Figure 3-5 and Figure 3-6. Figure 3-5
Figure 3-6 Add new group: Click on the add button, fill the group s information in the pop-up dialog box, click Submit button, then a new group has been created. Delete group: Select the groupname which you want to delete, and click delete butoon. Edit group: Click the line that a groupname is in, it turns green, on right side will pop up dialog box, there you can edit groupname s information., Remove selected device managers, devices and sites from group, Remove all of device managers, devices and sites form group, Add selected device managers, devices and sites to group, Add all of the device managers, devices and sites to group 3.2.4 Organ information API KEY 1:Export the key, reserved for new function. 3.2.5Tags Management As shown in Figure3-7, can manage tags.
Figure 3-7 Add Tags: Click on Add button, input tag s name in the pop-up dialog box, and then click on Submit. Delete Tags: Select the tags you want to delete, and then click delete button. Edit Tags: Click on the line that tag is in, it will turn green and then pop up a dialog box on the right side, you can edit tag in it. 3.3 Reporting Reporting is used to query and export the detail information about devices or sites. Reporting includes three parts: Summary, Connection Statistics and Flow Statistics 3.3.1 Summary Users can define the query condition, and then click the button Query, it will show all the matching records, click the button Export to export these records. As show in Figure 3-8 Figure 3-8 3.3.2 Connection Statistics Online statistics has two forms: online statistical reports and online statistical curve. If you choose the online statistical report forms in the navigation tree, as shown in Figure 3-9. Users can define the statistical conditions, and then click Query button to display all the information that meet the conditions. If you want to export these information, you can click the export button.
Figure 3-9 3.3.3 Flow Statistics: Traffic statistics has two kinds of forms: traffic statistics reports and traffic statistics curves. If you select the traffic statistics report form in the navigation tree, as shown in Figure 3-10. Users can define the statistical conditions, and then click Query button to display all the information that meet the conditions. If you want to export these information, you can click the export button. Figure 3-10 3.4 Device Device includes gateway, controller and model, this part is used to manage these devices,
such as: add/delete/edit tags, add/delete device, batch import and gateway management. 3.4.1 Gateway On the page of gateway, there are three kind of buttons as shown in Figure 3-11. Red, yellow and green boxes corresponding to the three class function button. Figure 3-11 The red box part: Add / delete / edit tag, the use method refers to in section 3.2.1 - tag management. Yellow box part: Select the form to display device name and related information. Green box part: Add/delete gateways: click Add/Delete button to add or delete gateways Batch add tags: first select the object to add tags, and then click on Batch tag button. Batch import Gateways: Click on<batch import > button, pop-up a dialog box, as shown in Figure. First download template, input related information, and then import this file.
Figure 3-12 Import mobile number: Click on <Import mobile number> button, download template, input imsi and mobile number, and then input file. Figure 3-13 Gateway management: First, select the gateway you want to manage, and then click on <Gateway management> button, do the configuration in the pop-up dialog box. For InRouter 600 and InRouter 700 series, the configuration interface as shown in Figure 3-14
Figure 3-14 For InRouter 800 and InRouter 900 series, the configuration interface is CLI based as shown in Figure 3-15 Figure 3-15 3.4.2 Controller On the page of controller, there are three kind of buttons as shown in Figure 3-16. Red, yellow and green boxes corresponding to the three class function button.
Figure 3-16 The red box part: Add / delete / edit tag, the use method refers to in section 3.2.1 - tag management. Yellow box part: Select the form to display device name and related information. Green box part: Add/delete gateways: click Add/Delete button to add or delete controllers Batch add tags: first select the object to add tags, and then click on Batch tag button. 3.4.3 Model On the page of model, there are two kind of buttons as shown in Figure 3-17. Red and green boxes corresponding to the two class function button. Figure 3-17 The red box part: Add / delete / edit tag, the use method refers to in section 3.2.1 - tag management. Green box part: Add/delete gateways: click Add/Delete button to add or delete models Batch add tags: first select the object to add tags, and then click on Batch tag button. Import Model: Click on <import model>button, input related information in pop-up dialog box and select a file to import.
Figure 3-18 3.5 Sites On the page of Sites, there are three items: Sites, Global, Device Touch. Sites is used to add/delete/tag site resource. Global is used to edit WEBSCADA. Device Touch is used to provide an interface to download DT software. 3.5.1 Sites Add/delete sites: the method is same to add/delete user, refers to 3.2.1 user management. Batch add tags: select the sites need to add tag, and then click on <batch tag>button. Figure 3-19 3.5.2 Global Global is used to add, delete, edit and display WEBSCADA frame. Add/delete/edit WEBSCADA as shown in Figure
Figure 3-20 Display the WEBSCADA frame Figure 3-21 3.5.3 Device Touch You can download DT software as shown in Figure
Figure 3-22 Run DT client on your PC, the UI of DT client as the flowing show: 3.6 Notification Here you can view the alarm and log information according to specific conditions. Alarm:
Log: Figure 3-23 Figure 3-24 3.7 Tasks Here you can batch recovery, suspend, cancel tasks according to specific conditions. Figure 3-25 3.8 The description of button on the page