GENERAL INFORMATION CONCEPT ADVANTAGES CERTIFICATES

curtain wall system E85 E 85 is a multifunctional system which can be com bined with any kind of glazing and shape as well as with other materials. E 85 enables the execution of complex constructions as roofs, cupolas, atriums, pyramids, conservatories. high structural stability of the system is achieved with lowest weight of the profiles. E 85 has optimum thermal performance even in regions with severe weather conditions. This system is easy for fabrication in the workshop and effortless to be assembled on site. The proper selection of thermal spacer reduces the chances for condensation formation Additional thermal spacer for optimum performance E 85 has effective and proved airtightness and watertightness, due to large internal drains on three levels, without discontinuity at the junction of mullions or transoms, carefully designed accessories and specially constructed supplementary profiles for sealing the perimeter of the façade. All characteristics of the system are tested in ift Rosenheim.

curtain wall system E85 There is option to insert photovoltaic and etalbond composite panels within the façade. 85 is also available in anti burglar version, which is suitable for window displays of bank offices and financial institutions. Sun protection panels can be easily installed in front of the system.

curtain wall system E85 There is an extended range of options for joining mullions and transoms according to the applied loads Additional joints can be used case of severe loads 2nd level drainage 3rd level drainage

curtain wall system E85 85 108 27811 R 900 5. 5. 85

curtain wall system E85 O 1 2 3 4 30

curtain wall system E 85 transom to transom connection 1 1 1 1 2 2 2 3 2 2 2 2 2 not to scale 2 2 E85M8.21 8.21

BUILDING PHYSICS DIMENSIONING FORMULAE EXAMPLES

curtain wall system E85 * h/b 0,25 h/b 0,5 b/8 2 m

curtain wall system E85 from vertical loads (dead loads) shall not exceed L/0, or 0,015 m whichever is the less (EN 13830), or 0,003m, whichever is the less (EN 13830)

curtain wall system E85

curtain wall system E85 w. (a/2). h w. (b/2). h w. (a/2). h w. (b/2). h or 0,015 m whichever is the less (EN 13830) 96. (1,5/2). 3,3 96. (1/2). 3,3

curtain wall system E85 = 0.9 a: 31927- S1-01a 2,2 2a: 31927- S1-02a 2 a: 31927- S1-03a 2 2 a: 31927- S1-04a 29,9 a: 31927- S1-05a 9 2 a: 31927- S1-06a 59 2 a: 31927- S1-07a 2 a: 31927- S1-08a 2 2 9a: 31927- S1-09a 29,9 0a: 31927- S1-10a a: 31927- S2-01a - - 59 2 2 2a: 31927- S2-02a - - 2 a: 31927- S2-03a - - 2 2 a: 31927- S2-04a - - 29 2 a: 31927- S2-05a - - 9 2 a: 31927- S2-06a - - 59 2 a: 31927- S2-07a - - 2 a: 31927- S2-08a - - 2 2 9a: 31927- S2-09a - - 29 2,2 0a: 31927- S2-10a - - 59 2 a: 31927- S3-01a 2a: 31927- S3-02a a: 31927- S3-03a a: 31927- S3-04a a: 31927- S3-05a a: 31927- S3-06a a: 31927- S3-07a a: 31927- S3-08a 9a: 31927- S3-09a 0a: 31927- S3-10a 1a: 31927- S3-11a 2a: 31927- S3-12a 3a: 31927- S3-13a 4a: 31927- S3-14a 5a: 31927- S3-15a 85359 85359 2 9 2 2 29 59 2 2 2 2 2,2 2 2 2 2,2 2,9 2,9 a: 31927- S4-01a,9 2a: 31927- S4-02a 20 2 a: 31927- S4-03a 2 2 a: 31927- S4-04a 9,9 a: 31927- S4-05a 9,9 a: 31927- S4-06a 69 2 a: 31927- S4-07a a: 31927- S4-08a 9 2 9a: 31927- S4-09a 85359 2 2 0a: 31927- S4-10a 1a: 31927- S4-11a 2 2a: 31927- S4-12a 29 3a: 31927- S4-13a 59 4a: 31927- S4-14a 5a: 31927- S4-15a 85359 2

TABLES LIST OF PROFILES CHARACTERISTICS

curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E 85100 mullion X 66 Y 6,6 m 2006 g/m 448 mm 149 mm Ix = 27,70 cm 4 Wx = 6,96 cm 3 ex = 2, cm ix = 1,93 cm Iy = 19,39 cm 4 Wy = 7,75 cm 3 еy = 3,98 cm iy = 1,62 cm E 85101 mullion 70 X 86 Y 6,6 m 2211 g/m 488 mm 189 mm Ix = 58,04 cm 4 Wx = 12,19 cm 3 ex = 2, cm ix = 2,66 cm Iy = 23,79 cm 4 Wy = 9,51 cm 3 еy = 4,76 cm iy = 1,70 cm E 85102 mullion 90 X 106 Y 6,6 m 2417 g/m 528 mm 229 mm Ix = 104,15 cm 4 Wx = 18,65 cm 3 ex = 2, cm ix = 3,41 cm Iy = 28,19 cm 4 Wy = 11,27 cm 3 еy = 5,58 cm iy = 1,78 cm E 85103 mullion 110 X 126 Y 6,6 m 2665 g/m 568 mm 269 mm Ix = 169,00 cm 4 Wx = 26,15 cm 3 ex = 2, cm ix = 4,14 cm Iy = 33,43 cm 4 Wy = 13,37 cm 3 еy = 6,46 cm iy = 1,84 cm E 85104 mullion 130 X 146 Y 6,6 m 2881 g/m 608 mm 309 mm Ix = 252,55 cm 4 Wx = 34,40 cm 3 ex = 2, cm ix = 4,87 cm Iy = 38,03 cm 4 Wy = 15,21 cm 3 еy = 7,34 cm iy = 1,89 cm E 85105 mullion 160 X 176 Y 6,6 m 3205 g/m 668 mm 369 mm Ix = 417,97 cm 4 Wx = 46,90 cm 3 ex = 2, cm ix = 5,93 cm Iy = 44,95 cm 4 Wy = 17,98 cm 3 еy = 8,91 cm iy = 1,95 cm 3.1

curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E 85106 mullion 180 X 196 Y 6,6 m 4628 g/m 708 mm 409 mm Ix = 752,98 cm 4 Wx = 74,89 cm 3 ex = 2, cm ix = 6,63 cm Iy = 60,74 cm 4 Wy = 24,30 cm 3 еy = 10,06 cm iy = 1,88 cm E 85107 mullion 200 X 216 Y 6,6 m 5165 g/m 748 mm 449 mm Ix = 1003,76 cm 4 Wx = 91,01 cm 3 ex = 2, cm ix = 7,24 cm Iy = 71,32 cm 4 Wy = 28,53 cm 3 еy = 11,03 cm iy = 1,93 cm E 85108 mullion 200 X 216 Y 6,6 m 6423 g/m 748 mm 449 mm Ix = 1326,00 cm 4 Wx = 116,21 cm 3 ex = 2, cm ix = 7,47 cm Iy = 80,93 cm 4 Wy = 32,37 cm 3 еy = 11,41 cm iy = 1,85 cm E 85109 mullion 230 X 246 Y 6,6 m 8416 g/m 808 mm 9 mm Ix = 2161,67 cm 4 Wx = 162,85 cm 3 ex = 2, cm ix = 8,33 cm Iy = 110,05 cm 4 Wy = 44,02 cm 3 еy = 13,27 cm iy = 1,88 cm E 85152 split mullion 22.5 X 90 Y 6,6 m 1320 g/m 382 mm 114 mm Ix = 33,69 cm 4 Wx = 6,96 cm 3 ex = 1,44 cm ix = 2,62 cm Iy = 2,70 cm 4 Wy = 1,87 cm 3 еy = 4,84 cm iy = 0,74 cm E 85153 split mullion 22.5 X 110 Y 6,6 m 1536 g/m 422 mm 134 mm Ix = 60,99cm 4 Wx = 10,58 cm 3 ex = 1,41 cm ix = 3,27 cm Iy = 3,40 cm 4 Wy = 2,40 cm 3 еy = 5,77 cm iy = 0,77 cm 3.2

curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E 85154 split mullion 22.5 X 130 Y 6,6 m 1752 g/m 462 mm 154 mm Ix = 99,63 cm 4 Wx = 14,85 cm 3 ex = 1,39 cm ix = 3,92 cm Iy = 4,09 cm 4 Wy = 2,94 cm 3 еy = 6,71 cm iy = 0,79 cm E 85155 split mullion 22.5 X 160 Y 6,6 m 2076 g/m 523 mm 184 mm Ix = 182,37 cm 4 Wx = 22,39 cm 3 ex = 1,37 cm ix = 4,87 cm Iy = 5,12 cm 4 Wy = 3,75 cm 3 еy = 8,15 cm iy = 0,82 cm E 851 suppl. profile for split mullion 32 X 68.8 Y 6,6 m 1004 g/m 343 mm 0 mm Ix = 14,00 cm 4 Wx = 3,95 cm 3 ex = 1,72 cm ix = 1,94 cm Iy = 1,56 cm 4 Wy = 0,90 cm 3 еy = 3,55 cm iy = 0,65 cm E 85151 suppl. profile for split mullion 32 X Y 6,6 m 230 g/m 91 mm 33 mm Ix = 0,10 cm 4 Wx = 0,10 cm 3 ex = 1,62 cm ix = 0,35 cm Iy = 0,53 cm 4 Wy = 0,33 cm 3 еy = 1,07 cm iy = 0,79 cm 13.5 E 85120 mullion for substructure 35.3 X 81 Y 6,6 m 2311 g/m 643 mm 94 mm Ix = 36,82 cm 4 Wx = 8,70 cm 3 ex = 2,51 cm ix = 2,08 cm Iy = 18,31 cm 4 Wy = 7,29 cm 3 еy = 4,23 cm iy = 1,46 cm E 19641 cover cap 7.5 26.4 6,6 m 130 g/m 81 mm 26 mm 3.3

curtain wall system code description profile X length weight ext. perimeter vis. perimeter statical values E 85 E 85130 mullion 90 106 90 90 106 Y 6,6 m 3572 g/m 859 mm 259 mm Ix = 128,93 cm 4 Wx = 20,80 cm 3 ex = 6,20 cm ix = 3,12 cm Iy = 128,93 cm 4 Wy = 20,80 cm 3 еy = 6,20 cm iy = 3,12 cm X 90 E 85135 mullion 135 141.2 Y 6,6 m 3610 g/m 6 mm 333 mm Ix = 176,02 cm 4 Wx = 27,17 cm 3 ex = 7,06 cm ix = 3,63 cm Iy = 216,12 cm 4 Wy = 30,62 cm 3 еy = 6,48 cm iy = 4,02 cm 119.7 90 E 85140 suppl. mullion profile X 40.1 Y 6,6 m 999 g/m 313 mm 19 mm Ix = 6,14 cm 4 Wx = 2,79 cm 3 ex = 2, cm ix = 1,29 cm Iy = 5,17 cm 4 Wy = 2,07 cm 3 еy = 2,20 cm iy = 1,18 cm E 85141 split rotating mullion 30 X 55.6 Y 6,6 m 986 g/m 312 mm 42 mm Ix = 7,26 cm 4 Wx = 2,54 cm 3 ex = 1,62 cm ix = 1,41 cm Iy = 3,89 cm 4 Wy = 2,41 cm 3 еy = 2,86 cm iy = 1,03 cm E 85142 inner suppl. mullion profile 90 48.2 X 48.2 48 Y 6,6 m 810 g/m 226 mm 29 mm Ix = 3, cm 4 Wx = 1,38 cm 3 ex = 2,53 cm ix = 1,08 cm Iy = 3, cm 4 Wy = 1,38 cm 3 еy = 2,53 cm iy = 1,08 cm E 85143 outer suppl. mullion profile 90 35.7 X 35.7 44.3 Y 6,6 m 972 g/m 240 mm 0 mm Ix = 3,38 cm 4 Wx = 1,89 cm 3 ex = 1,79 cm ix = 0,97 cm Iy = 3,38 cm 4 Wy = 1,89 cm 3 еy = 1,79 cm iy = 0,97 cm 3.4

curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E 85300 2nd level transom 15 X 31 Y 6,01 m 1015 g/m 300 mm 79 mm Ix = 2,78 cm 4 Wx = 1,33 cm 3 ex = 2, cm ix = 0,86 cm Iy = 7,64 cm 4 Wy = 3,06 cm 3 еy = 2,10 cm iy = 1,43 cm E 85301 2nd level transom 29 X 45 Y 6,01 m 1293 g/m 330 mm 107 mm Ix = 7,12 cm 4 Wx = 2,76 cm 3 ex = 2, cm ix = 1,22 cm Iy = 11,55 cm 4 Wy = 4,62 cm 3 еy = 2,61 cm iy = 1,55 cm E 85302 2nd level transom 49 X 65 Y 6,01 m 1455 g/m 370 mm 147 mm Ix = 19,52 cm 4 Wx = 6,00 cm 3 ex = 2, cm ix = 1,90 cm Iy = 15,08 cm 4 Wy = 6,03 cm 3 еy = 3,26 cm iy = 1,67 cm E 85303 2nd level transom 69 X 85 Y 6,01 m 1785 g/m 410 mm 187 mm Ix = 45,83 cm 4 Wx = 10,54 cm 3 ex = 2, cm ix = 2,64 cm Iy = 21,60 cm 4 Wy = 8,64 cm 3 еy = 4,35 cm iy = 1,81 cm E 85304 2nd level transom 89 X 105 Y 6,01 m 2276 g/m 4 mm 227 mm Ix = 98,87 cm 4 Wx = 18,06 cm 3 ex = 2, cm ix = 3,42 cm Iy = 26,45 cm 4 Wy = 10,58 cm 3 еy = 5,47 cm iy = 1,77 cm E 85305 2nd level transom 109 X 125 Y 6,01 m 2492 g/m 490 mm 267 mm Ix = 160,52 cm 4 Wx = 25,02 cm 3 ex = 2, cm ix = 4,17 cm Iy = 31,06 cm 4 Wy = 12,42 cm 3 еy = 6,42 cm iy = 1,83 cm 3.5

curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E 85306 2nd level transom 129 X 145 Y 6,01 m Ix = 240,58 cm 4 2708 g/m Wx = 32,66 cm 3 530 mm ex = 2, cm 307 mm ix = 4,90 cm Iy = 35,67 cm 4 Wy = 14,27 cm 3 еy = 7,37 cm iy = 1,89 cm E 85307 2nd level transom 159 X 175 Y 6,01 m 3032 g/m 590 mm 367 mm Ix = 398,72 cm 4 Wx = 45,28 cm 3 ex = 2, cm ix = 5,96 cm Iy = 42,59 cm 4 Wy = 17,04 cm 3 еy = 8,81 cm iy = 1,95 cm E 85600 2nd level suppl. transom 58 X Y 6,01 m 1080 g/m 283 mm 195 mm Ix = 22,08 cm 4 Wx = 5,85 cm 3 ex = 2,90 cm ix = 2,35 cm Iy = 20, cm 4 Wy = 7,07 cm 3 еy = 3,78 cm iy = 2,27 cm 69 E 85601 2nd level suppl. transom 58 X 89 Y 6,01 m 1229 g/m 323 mm 235 mm Ix = 43,64 cm 4 Wx = 9,25 cm 3 ex = 2,90 cm ix = 3,10 cm Iy = 24,98 cm 4 Wy = 8,61 cm 3 еy = 4,72 cm iy = 2,34 cm E 85602 2nd level suppl. transom 58 X Y 6,01 m 1380 g/m 363 mm 275 mm Ix = 74,28 cm 4 Wx = 13,10 cm 3 ex = 2,90 cm ix = 3,81 cm Iy = 29,47 cm 4 Wy = 10,16 cm 3 еy = 5,67 cm iy = 2,40 cm 109 E 85603 2nd level suppl. transom 58 X 129 Y 6,01 m 1531 g/m 403 mm 315 mm Ix = 115,13 cm 4 Wx = 17,37 cm 3 ex = 2,90 cm ix = 4, cm Iy = 33,95 cm 4 Wy = 11,71 cm 3 еy = 6,63 cm iy = 2,45 cm 3.6

curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values 6 E 853 3rd level transom X Y 16 6,01 m Ix = 0,41 cm 4 605 g/m Wx = 0,35 cm 3 204 mm ex = 2, cm 62 mm ix = 0,43 cm Iy = 3,78 cm 4 Wy = 1,51 cm 3 еy = 1,18 cm iy = 1,30 cm E 85360 3rd level transom 15 X Y 25 6,01 m 948 g/m 221 mm 79 mm Ix = 1,49 cm 4 Wx = 0,94 cm 3 ex = 2, cm ix = 0,65 cm Iy = 7,42 cm 4 Wy = 2,97 cm 3 еy = 1,58 cm iy = 1,45 cm E 85351 3rd level transom 35 X 45 Y 6,01 m 1164 g/m 261 mm 119 mm Ix = 8,70 cm 4 Wx = 3,69 cm 3 ex = 2, cm ix = 1,42 cm Iy = 12,03 cm 4 Wy = 4,81 cm 3 еy = 2,36 cm iy = 1,67 cm E 85352 3rd level transom 55 X 65 Y 6,01 m 1380 g/m 301 mm 159 mm Ix = 24,25 cm 4 Wx = 7,37 cm 3 ex = 2, cm ix = 2,18 cm Iy = 16,64 cm 4 Wy = 6,65 cm 3 еy = 3,29 cm iy = 1,80 cm E 85353 3rd level transom 75 X 85 Y 6,01 m 1874 g/m 341 mm 199 mm Ix = 58,19 cm 4 Wx = 12,82 cm 3 ex = 2, cm ix = 2,90 cm Iy = 21,49 cm 4 Wy = 8,60 cm 3 еy = 4,54 cm iy = 1,76 cm E 85354 3rd level transom 95 X 105 Y 6,01 m 2090 g/m 381 mm 239 mm Ix = 102,48 cm 4 Wx = 18,46 cm 3 ex = 2, cm ix = 3,64 cm Iy = 26,10 cm 4 Wy = 10,44 cm 3 еy = 5,55 cm iy = 1,84 cm 3.7

curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E 85355 3rd level transom 115 X 125 Y 6,01 m Ix = 162,24 cm 4 2306 g/m Wx = 24,72 cm 3 421 mm ex = 2, cm 279 mm ix = 4,36 cm Iy = 30,71 cm 4 Wy = 12,29 cm 3 еy = 6,56 cm iy = 1,90 cm E 85356 3rd level transom 135 X 145 Y 6,01 m 2522 g/m 461 mm 319 mm Ix = 239,09 cm 4 Wx = 31,58 cm 3 ex = 2, cm ix = 5,06 cm Iy = 35,32 cm 4 Wy = 14,13 cm 3 еy = 7,57 cm iy = 1,95 cm E 85357 3rd level transom 165 X 175 Y 6,01 m 2846 g/m 521 mm 379 mm Ix = 389,88 cm 4 Wx = 42,93 cm 3 ex = 2, cm ix = 6,08 cm Iy = 42,24 cm 4 Wy = 16,90 cm 3 еy = 9,08 cm iy = 2,00 cm E 85358 3rd level transom 185 X 195 Y 6,01 m 3062 g/m 561 mm 419 mm Ix = 516,42 cm 4 Wx = 51,19 cm 3 ex = 2, cm ix = 6,75 cm Iy = 46,85 cm 4 Wy = 18,74 cm 3 еy = 10,09 cm iy = 2,03 cm E 85359 3rd level transom 205 X 215 Y 6,01 m 3278 g/m 601 mm 459 mm Ix = 665,65 cm 4 Wx = 60,01 cm 3 ex = 2, cm ix = 7,41 cm Iy = 51,46 cm 4 Wy = 20,58 cm 3 еy = 11,09 cm iy = 2,06 cm E 85369 3rd level transom 235 X 245 Y 6,01 m 3448 g/m 661 mm 519 mm Ix = 882,24 cm 4 Wx = 71,59 cm 3 ex = 2, cm ix = 8,31 cm Iy = 58,94 cm 4 Wy = 23,58 cm 3 еy = 12,32 cm iy = 2,15 cm 3.8

curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E 85380 3rd level hidden transom 21.2 X Y 21.2 6,01 m Ix = 1,67 cm 4 820 g/m Wx = 1,54 cm 3 175 mm ex = 2, cm 91 mm ix = 0,74 cm Iy = 8,74 cm 4 Wy = 3, cm 3 еy = 1,09 cm iy = 1,70 cm E 85320 2nd level split transom 42 29 45 6,01 m 1131 g/m 312 mm 60 mm Ix = 7,62 cm 4 Wx = 3,14 cm 3 ex = 2,40 cm ix = 1,35 cm Iy = 4,98 cm 4 Wy = 2,08 cm 3 еy = 2,43 cm iy = 1,09 cm E 85370 3rd level split transom 55 65 40 6,01 m 1061 g/m 341 mm 77 mm Ix = 19,34 cm 4 Wx = 5,80 cm 3 ex = 2,55 cm ix = 2,22 cm Iy = 5,21 cm 4 Wy = 2,04 cm 3 еy = 3,34 cm iy = 1,15 cm E 85670 suppl. profile for E 85370 68.9 6,01 m 791 g/m 294 mm 13 mm Ix = 8,56 cm 4 Wx = 2,74 cm 3 ex = 3,44 cm ix = 1,71 cm Iy = 6,26 cm 4 Wy = 1,82 cm 3 еy = 3,12 cm iy = 1,46 cm 51 E 85410 frame 54.5 X 90.3 Y 6,01 m 1329 g/m 415 mm 186 mm Ix = 38, cm 4 Wx = 7,97 cm 3 ex = 3,19 cm ix = 2,77 cm Iy = 8,12 cm 4 Wy = 1,33 cm 3 еy = 4,83 cm iy = 1,34 cm E 85400 frame 49 X 61.4 Y 6,01 m 886 g/m 339 mm 185 mm Ix = 12,87 cm 4 Wx = 3,55 cm 3 ex = 3,10 cm ix = 1,98 cm Iy = 4,62 cm 4 Wy = 1,49 cm 3 еy = 3,62 cm iy = 1,19 cm 3.9

curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E 85210 sash for projected window 49.5 79 X Y 6,01 m Ix = 30,66 cm 4 1413 g/m Wx = 7,63 cm 3 365 mm ex = 2,81 cm 105 mm ix = 2,54 cm Iy = 8,17 cm 4 Wy = 1,99 cm 3 еy = 4,35 cm iy = 1,31 cm E 85211 sash for parallel window 49.5 79 X Y 6,01 m 1416 g/m 357 mm 104 mm Ix = 30,90 cm 4 Wx = 7,57 cm 3 ex = 2,81 cm ix = 2,53 cm Iy = 8,15 cm 4 Wy = 1,92 cm 3 еy = 4,44 cm iy = 1,30 cm E 85200 sash for projected window 55.3 X Y 6,01 m 934 g/m 287 mm 209 mm Ix = 11,78 cm 4 Wx = 3,72 cm 3 ex = 3,49 cm ix = 1,84 cm Iy = 6,71 cm 4 Wy = 1,92 cm 3 еy = 3,17 cm iy = 1,39 cm 57.8 E 85614 external glass support 27.9 19.2 6,01 m 208 g/m 99 mm 43 mm E 85615 external glass support 14.8 22 6,01 m 200 g/m 101 mm 46 mm E 2308 operating rod 4.3 19.7 4,4 m 159 g/m 48 mm 0 mm 3.10

curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E 2309 operating rod 4.7 23.5 4,40 m 197 g/m 55 mm 0 mm E 85915 spacer 4.8 19 6,01 m 130 g/m 66 mm 0 mm E 85700 pressure plate 10.2 47.6 6,01 m 435 g/m 151 mm 0 mm E 85745 pressure plate 23.6 47.6 6,01 m 655 g/m 205 mm 0 mm E 85701 pressure plate for slope > 25 46.4 10.2 6,01 m 403 g/m 138 mm 0 mm E 85702 pressure plate for slope > 15 5.5 6,01 m 416 g/m 113 mm 54 mm 3.11

curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E 85703 pressure plate for angle 7.5 25.9 70.7 6,01 m 1034 g/m 305 mm 51 mm E 85704 pressure plate for angle 15 28.2 80.8 6,01 m 1121 g/m 327 mm 63 mm E 85705 pressure plate for angle 22.5 31.6 89.8 6,01 m 1204 g/m 349 mm 74 mm E 85706 pressure plate for angle 30 35.9 97 6,01 m 1291 g/m 371 mm 86 mm E 85707 pressure plate for angle 37.5 44 110.2 6,01 m 1455 g/m 413 mm 106 mm E 85708 pressure plate for angle 45 53.8 6,01 m 1620 g/m 455 mm 128 mm 119.2 3.12

curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E 85740 plate for pressure corner 90 19.1 42.2 6,01 m 510 g/m 170 mm 0 mm E 85741 pressure plate for corner 135 18.2 46.2 6,01 m 8 g/m 169 mm 0 mm E 85709 pressure plate 12.3 6,01 m 384 g/m 169 mm 41 mm E 85719 cover cap for E 85709 6 24.3 6,01 m 126 g/m 87 mm 37 mm E 857 pressure plate 10.2 48 6,01 m 348 g/m 130 mm 42 mm E 85751 cover cap for E 857 4.9 13.8 6,01 m 54 g/m 45 mm 16 mm 3.13

curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E 85711 cover cap 12 6,01 m 289 g/m 144 mm 75 mm E 85712 cover cap 15 6,01 m 332 g/m 166 mm 81 mm E 85713 cover cap 20 6,01 m 400 g/m 191 mm 91 mm E 85714 cover cap 25 6,01 m 432 g/m 211 mm 101 mm E 85715 cover cap 30 6,01 m 467 g/m 231 mm 111 mm E 85716 cover cap 60 6,01 m 821 g/m 291 mm 171 mm 3.14

curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E 85718 cover cap 165 6,01 m 1779 g/m 6 mm 381 mm E 85720 cover cap 25 6,01 m 467 g/m 206 mm 121 mm E 85721 cover cap 18 6,01 m 281 g/m 1 mm 77 mm E 85722 cover cap 40 6,01 m 462 g/m 231 mm 110 mm E 85723 cover cap 100 6,01 m 1207 g/m 337 mm 216 mm E 85724 cover cap 160 6,01 m 1627 g/m 453 mm 333 mm 3.15

curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E 85730 cover cap 12 6,01 m 262 g/m 132 mm 67 mm E 85731 cover cap corner 90 17.6 45 6,01 m 373 g/m 171 mm 61 mm E 85732 cover cap corner 135 20.4 49.8 6,01 m 446 g/m 206 mm 79 mm E 85790 cover cap inox 51 15 6,01 m - g/m - mm - mm E 85791 cover cap inox 51 20 6,01 m - g/m - mm - mm E 85906 transom connector 45.6 X 40 Y 6,01 m 724 g/m 251 mm 0 mm Ix = 3,93 cm 4 Wx = 1,39 cm 3 ex = 2,30 cm ix = 1,21 cm Iy = 8,95 cm 4 Wy = 3,90 cm 3 еy = 2,83 cm iy = 1,83 cm 3.16

curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E 85907 transom connector 45.6 X 45.7 Y 6,01 m 1010 g/m 187 mm 0 mm Ix = 9,79 cm 4 Wx = 4,20 cm 3 ex = 2,28 cm ix = 1,62 cm Iy = 10,20 cm 4 Wy = 4,47 cm 3 еy = 2,33 cm iy = 1,65 cm E 85908 base for transom connector 42.6 X Y 6.5 6,01 m 367 g/m 109 mm 0 mm Ix = 0,04 cm 4 Wx = 0,08 cm 3 ex = 2,13 cm ix = 0,16 cm Iy = 2,02 cm 4 Wy = 0,95 cm 3 еy = 0,44 cm iy = 1,22 cm E 85994 transom connector 45 X 43.2 Y 2,01 m 1557 g/m 261 mm 0 mm Ix = 10,31 cm 4 Wx = 4,25 cm 3 ex = 2,25 cm ix = 1,34 cm Iy = 12,85 cm 4 Wy = 5,71 cm 3 еy = 2,43 cm iy = 1,49 cm E 85951 insert for E 85101 45.2 X 38.2 Y 2,01 m 1739 g/m 240 mm 0 mm Ix = 9,82 cm 4 Wx = 4,96 cm 3 ex = 2,26 cm ix = 1,24 cm Iy = 11,31 cm 4 Wy = 5,01 cm 3 еy = 1,98 cm iy = 1,33 cm E 85952 insert for E 85102 45.2 X 58.2 Y 2,01 m 2041 g/m 280 mm 0 mm Ix = 31,32 cm 4 Wx = 10,71 cm 3 ex = 2,26 cm ix = 2,04 cm Iy = 13,91 cm 4 Wy = 6,15 cm 3 еy = 2,92 cm iy = 1,36 cm E 85953 insert for E 85103 45.2 X 78.2 Y 2,01 m 2344 g/m 320 mm 0 mm Ix = 67,86 cm 4 Wx = 17,02 cm 3 ex = 2,26 cm ix = 2,80 cm Iy = 16,05 cm 4 Wy = 7,30 cm 3 еy = 3,99 cm iy = 1,38 cm 3.17

curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E 85954 insert for E 85104 45.2 X 98.2 Y 2,01 m 2646 g/m 360 mm 0 mm Ix = 121,71 cm 4 Wx = 24,17 cm 3 ex = 2,26 cm ix = 3,52 cm Iy = 19,10 cm 4 Wy = 8,45 cm 3 еy = 5,04 cm iy = 1,40 cm E 85955 insert for E 85105 45.2 X 128.2 Y 2,01 m 3100 g/m 420 mm 0 mm Ix = 239,90 cm 4 Wx = 36,40 cm 3 ex = 2,26 cm ix = 4,57 cm Iy = 22,99 cm 4 Wy = 10,17 cm 3 еy = 6,59 cm iy = 1,42 cm E 85956 insert for E 85106 44.2 X 143.7 Y 2,01 m 3275 g/m 449 mm 0 mm Ix = 311,58 cm 4 Wx = 42,32 cm 3 ex = 2,21 cm ix = 5,07 cm Iy = 23,06 cm 4 Wy = 10,43 cm 3 еy = 7,36 cm iy = 1,38 cm E 85957 insert for E 85107 43.6 X 163.7 Y 2,01 m 3532 g/m 488 mm 0 mm Ix = 425,36 cm 4 Wx =,82 cm 3 ex = 2,18 cm ix = 5,70 cm Iy = 24,21 cm 4 Wy = 11,11 cm 3 еy = 8,37 cm iy = 1,36 cm E 85958 insert for E 85108 43.2 X 154.7 Y 2,01 m 3499 g/m 469 mm 0 mm Ix = 368,85 cm 4 Wx = 46,79 cm 3 ex = 2,16 cm ix = 5,34 cm Iy = 23,17 cm 4 Wy = 10,73 cm 3 еy = 7,88 cm iy = 1,34 cm E 85961 insert for polygonal atriums 43.2 X 90 Y 2,01 m 3977 g/m 255 mm 0 mm Ix = 138,19 cm 4 Wx = 30,46 cm 3 ex = 2,16 cm ix = 3,06 cm Iy = 39,69 cm 4 Wy = 18,38 cm 3 еy = 4,54 cm iy = 1,64 cm 3.18

curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E 85969 roof connector/ insert for E 85109 40.8 X 181.7 Y 2,01 m 7680 g/m 545 mm 0 mm Ix = 1076,08 cm 4 Wx = 117,52 cm 3 ex = 2,04 cm ix = 5,80 cm Iy = 60,25 cm 4 Wy = 32,79 cm 3 еy = 9,17 cm iy = 1,45 cm E 85960 roof connector 45.2 X 216 Y 2,01 m 10916 g/m 624 mm 0 mm Ix = 1908,80 cm 4 Wx = 175,48 cm 3 ex = 2,26 cm ix = 6,87 cm Iy = 108,21 cm 4 Wy = 47,88 cm 3 еy = 10,88 cm iy = 1,64 cm E 85972 insert for E 85152 15.5 X 31.9 Y 2,01 m 764 g/m 93 mm 0 mm Ix = 3,26 cm 4 Wx = 2,04 cm 3 ex = 0,78 cm ix = 1,07 cm Iy = 0,81 cm 4 Wy = 1,04 cm 3 еy = 1,60 cm iy = 0,54 cm E 85973 insert for E 85153 15.5 X 51.9 Y 2,01 m 1034 g/m 133 mm 0 mm Ix = 11,95 cm 4 Wx = 4,60 cm 3 ex = 0,78 cm ix = 1,77 cm Iy = 1,24 cm 4 Wy = 1,59 cm 3 еy = 2,60 cm iy = 0,57 cm E 85974 insert for E 85154 15.5 X 71.9 Y 2,01 m 1304 g/m 173 mm 0 mm Ix = 28,29 cm 4 Wx = 7,87 cm 3 ex = 0,78 cm ix = 2,42 cm Iy = 1,67 cm 4 Wy = 2,14 cm 3 еy = 3,60 cm iy = 0,59 cm E 85975 insert for E 85155 15.5 X 101.9 Y 2,01 m 1709 g/m 233 mm 0 mm Ix = 71,55 cm 4 Wx = 14,04 cm 3 ex = 0,78 cm ix = 3,36 cm Iy = 2,31 cm 4 Wy = 2,97 cm 3 еy = 5,10 cm iy = 0,60 cm 3.19

curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E 85640 spacer 6 mm 8.7 6 10 6,01 m 97 g/m 59 mm 6 mm E 8611 spacer 10 mm 12.7 10 10 6,01 m 130 g/m 82 mm 10 mm E 85641 spacer 12 mm 14.7 12 10 6,01 m 140 g/m 90 mm 12 mm E 85642 spacer 18 mm 20.7 18 10 6,01 m 200 g/m 98 mm 18 mm E 856 spacer 7,5 9.9 6 10 6,01 m 101 g/m 61 mm 6 mm E 85651 spacer 15 11.3 6.2 10 6,01 m 108 g/m 65 mm 6 mm 3.20

curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E 85652 spacer 22,5 12.8 6.5 10 6,01 m 117 g/m 69 mm 7 mm E 85653 spacer 30 14.6 6.9 10 6,01 m 128 g/m 75 mm 7 mm E 85654 spacer 37,5 16.8 7.5 10 6,01 m 142 g/m 82 mm 8 mm E 85655 spacer 45 19.8 8.5 10 6,01 m 161 g/m 93 mm 9 mm 33 879 spacer for structural glazing 9.3 11 6,01 m 70 g/m 53 mm 0 mm 3.21

curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E 85990 spacer for structural glazing 24 19.3 6,01 m 229 g/m 138 mm 0 mm 33 1 spacer for structural glazing 9 16 6,01 m 139 g/m 71 mm 0 mm 33 881 glazing clip for 33 879 8.9 22 6,01 m 307 g/m 68 mm 0 mm E 85920 glazing clip 8.6 43.6 6,01 m 596 g/m 110 mm 0 mm E 85921 glazing clip 10 43.6 6,01 m 602 g/m 115 mm 0 mm E 85902 glazing support 17.2 44.9 6,01 m 383 g/m 122 mm 0 mm 3.22

curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E 85916 glazing support 17.2 48.9 6,01 m 408 g/m 130 mm 0 mm E 85910 glazing support 17.2 54.9 6,01 m 446 g/m 142 mm 0 mm E 85912 glazing support 9.7 29.8 2,01 m 246 g/m 79 mm 0 mm E 85917 glazing support 9.7 33.3 6,01 m 266 g/m 86 mm 0 mm E 85914 glazing support 9.7 39.8 2,01 m 306 g/m 99 mm 0 mm X E 85992 fixing bracket 106 Y 6,01 m 6468 g/m 776 mm 0 mm Ix = 348,56 cm 4 Wx = 44,06 cm 3 ex = 7,76 cm ix = 3,81 cm Iy = 254,56 cm 4 Wy = 32,82 cm 3 еy = 7,90 cm iy = 3,26 cm 158 3.23

curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 X E 85900 fixing bracket 105 Y 2,01 m 8397 g/m 871 mm 0 mm Ix = 822,14 cm 4 Wx = 74,74 cm 3 ex = 8,00 cm ix = 5,14 cm Iy = 279,77 cm 4 Wy = 37,20 cm 3 еy = 11,00 cm iy = 3,09 cm 220 X E 85993 fixing bracket 1 Y 6,01 m 10260 g/m 1032 mm 0 mm Ix = 836,65 cm 4 Wx = 79,68 cm 3 ex = 10,76 cm ix = 4,69 cm Iy = 842,12 cm 4 Wy = 78,27 cm 3 еy = 10, cm iy = 4,71 cm 210 X E 85918 fixing bracket 140 Y 2,01 m 10972 g/m 693 mm 0 mm Ix = 907,18 cm 4 Wx = 86,40 cm 3 ex = 10,23 cm ix = 4,73 cm Iy = 771,28 cm 4 Wy = 75,39 cm 3 еy = 10, cm iy = 4,36 cm 210 X E 85913 fixing bracket 100 Y 2,01 m 4892 g/m 494 mm 0 mm Ix = 234,00 cm 4 Wx = 31,20 cm 3 ex = 7,89 cm ix = 3,59 cm Iy = 152,96 cm 4 Wy = 19,39 cm 3 еy = 7, cm iy = 2,91 cm 1 X E 85967 fixing bracket 105 Y 2,01 m 3458 g/m 415 mm 0 mm Ix = 85,63 cm 4 Wx = 13,96 cm 3 ex = 7,58 cm ix = 2,59 cm Iy = 135,56 cm 4 Wy = 17,89 cm 3 еy = 6,13 cm iy = 3,25 cm 84 E 85901 suppl. profile for fixing bracket 5 26 6,01 m 313 g/m 65 mm 0 mm 3.24

curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E 85903 suppl. profie for fixing bracket 14.3 X 108 Y 6,01 m 2036 g/m 271 mm 0 mm 7528 insert for E 85130 60 X Y 5,00 m 1847 g/m 239 mm 0 mm Ix = 37,13 cm 4 Wx = 12,38 cm 3 ex = 3,00 cm ix = 2,33 cm Iy = 37,13 cm 4 Wy = 12,38 cm 3 еy = 3,00 cm iy = 2,33 cm 60 E 85966 suppl. profile for louvers 44.2 29.6 6,01 m 1246 g/m 207 mm 0 mm E 85911 drainage profile 40.3 17.5 6,01 m 240 g/m 122 mm 0 mm E 85904 profile for spring connector 13.8 15.3 6,01 m 283 g/m 46 mm 0 mm E 85290 spacer for etalbond 23 21.1 6,01 m 448 g/m 126 mm 0 mm 3.25

curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E 85291 spacer for etalbond 19 25.1 6,01 m 400 g/m 134 mm 0 mm E 85610 suppl. profile for sealing membrane 7.5 29.6 6,01m 176 g/m 65 mm 0 mm E 85611 suppl. profile for sealing membrane 24.5 43 6,01 m 346 g/m 176 mm 0 mm E 85612 suppl. profile for sealing membrane 24.5 43 6,01 m 381 g/m 170 mm 0 mm E 85620 wall attachment profile 40 70 6,01 m 984 g/m 277 mm 0 mm E 85621 wall attachment profile 40 74 6,01 m 999 g/m 285 mm 0 mm 3.26

curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E 8700 cover cap anti-burglar 60 25 6,01 m 479 g/m 231 mm 111 mm E 8701 cover cap anti-burglar 60 23 6,01 m 460 g/m 223 mm 107 mm E 8620 pressure plate anti-burglar 9.6 57.6 6,01 m 554 g/m 168 mm 0 mm 009 flat bar anti-burglar 10 6,01 m 13 g/m 120 mm 0 mm 47001 square tube anti-burglar 45 47.5 6,01 m 1816 g/m 182 mm 0 mm Ix = 21,00 cm 4 Wx = 8,84 cm 3 ex = 2,25 cm ix = 1,77 cm Iy = 19,23 cm 4 Wy = 8,55 cm 3 еy = 2,38 cm iy = 1,69 cm E 85727 cover cap 100 6,01 m 1312 g/m 388 mm 251 mm 3.27

PROFILES DRAWINGS SCALE 1:1

curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E 85801 reinforcement for transom E 85306 45.4 X 111 Y 6,01 m 2356 g/m 355 mm 0 mm Ix = 127,94 cm 4 Wx = 21,57 cm 3 ex = 2,27 cm ix = 3,83 cm Iy = 28,07 cm 4 Wy = 12,36 cm 3 еy = 5,93 cm iy = 1,79 cm E 85802 reinforcement for transom E 85357 45.4 X 156 Y 6,01 m 2964 g/m 445 mm 0 mm Ix = 310,45 cm 4 Wx = 37,33 cm 3 ex = 2,27 cm ix = 5,32 cm Iy = 37,86 cm 4 Wy = 16,68 cm 3 еy = 8,32 cm iy = 1,86 cm E 85803 reinforced glazing support for 2nd level transom 44.4 X 51.5 Y 6,01 m 12 g/m 276 mm 0 mm Ix = 12,08 cm 4 Wx = 4,45 cm 3 ex = 2,22 cm ix = 1,62 cm Iy = 3,44 cm 4 Wy = 1,55 cm 3 еy = 2,72 cm iy = 0,86 cm E 85804 reinforced glazing support for 3rd level transom 27.6 X 36 Y 6,01 m 889 g/m 165 mm 0 mm Ix = 3, cm 4 Wx = 1,89 cm 3 ex = 1,38 cm ix = 1,03 cm Iy = 1,18 cm 4 Wy = 0,86 cm 3 еy = 1,84 cm iy = 0,60 cm E 85805 reinforcement additional 15.6 6.4 6,01 m 210 g/m 44 mm 0 mm E 85905 reinforced transom connector 45.6 X 60 Y 6,01 m 2232 g/m 321 mm 0 mm Ix = 26,27 cm 4 Wx = 7,76 cm 3 ex = 2,28 cm ix = 1,78 cm Iy = 24,34 cm 4 Wy = 10,68 cm 3 еy = 3,89 cm iy = 1,72 cm 3.28

curtain wall system E 85 mullions, inserts, connectors and flush transoms 2nd and 3rd level code insert roof connector 2 nd level flush transom 2 nd level flush transom + suppl. Profile 3 rd level flush transom 3 rd level flush hidden transom + suppl. profile E 85100 - E 85960 E 85302 - E 85352 - E 85101 E 85951 E 85960 E 85303 E 85300+E 85600 E 85353 E 85380+E 85600 E 85102 E 85952 E 85960 E 85304 E 85300+E 85601 E 85354 E 85380+E 85601 E 85103 E 85953 E 85960 E 85305 E 85300+E 85602 E 85355 E 85380+E 85602 E 85104 E 85954 E 85960 E 85306 E 85300+E 85603 E 85356 E 85380+E 85603 E 85105 E 85955 E 85960 E 85307 - E 85357 - E 85106 E 85956 E 85969 - - E 85358 - E 85107 E 85957 E 85969 - - E 85359 - E 85108 E 85958 E 85969 - - E 85359 - E 85109 E 85969 E 85969 - - E 85369-4.1

curtain wall system E85 mullions 24.5 5 144.5 6 194 6 16 20 10 20 10 10 10 10 20 10 20 10 10 10 10 insert E 85956 2.5 2.5 45 E 85106 E 85107 44.4 2.8 2.8 insert E 85957 24.5 16 180 196 200 216 2.5 66 24.5 8 155.5 12 86 70 E 85100 E 85101 4 39 4 19 insert E 85951 insert E 85952 20 10 20 10 10 10 10 insert E 85958 E 85108 3 44 3 106 90 E 85102 59 16 200 4 216 insert E 85953 126 110 E 85103 79 4 24.5 8 182.5 15 146 130 176 160 E 85104 E 85105 129 4 99 4 insert E 85954 insert E 85955 20 10 20 10 10 10 10 insert E 85969 E 85109 4 42 4 scale 1:1 2 46 2 16 246 230

curtain wall system E 85 split mullions, inserts and flush transoms 2nd and 3rd level code insert 2 nd level flush transom 2 nd level flush transom + suppl. Profile 3 rd level flush transom 3 rd level flush hidden transom + suppl. profile E 85152 E 85972 E 85304 E 85300+E 85601 E 85354 E 85380+E 85601 E 85153 E 85973 E 85305 E 85300+E 85602 E 85355 E 85380+E 85602 E 85154 E 85974 E 85306 E 85300+E 85603 E 85356 E 85380+E 85603 E 85155 E 85975 E 85307 - E 85357 -

curtain wall system E 85 split mullions supplementary profiles for split mullions suppl. profile E 851 E 851 32.7 90 45.8 insert E 85972 16.3 E 85152 insert E 85973 E 85153 52.7 110 insert E 85974 E 85154 72.7 130 insert E 85975 E 85155 102.7 160 13.5 68.8 32 mullion E 85155 suppl. profile E 85151 22.5 E 85151 32 mullion E 85155 scale 1:1 4.4

curtain wall system E 85 mullion for substructure & cover cap E 85120 20 10 20 16 10 10 10 10 E 853 E 85360 mullion E 85120 24.5 E 85300 2 65 35.3 81 2.5 E 85301/E 85351 38 27.7 E 85302/E 85352 26.4 cover cap E 19641 19.5 11 19.5 7.5 E 19641 appropriate transom 2nd and 3rd level code 2 nd level transom 3 rd level transom E 85120 E 85300 E 853/E 85360 E 85301 E 85351 E 85302 E 85352 scale 1:1 4.5

curtain wall system E 85 mullion 90 20 10 10 10 15.5 40.5 106 90 16 10 2.5 10 10 60.5 10 15.5 2.5 10 10 10 15.5 24.5 10 2.5 60.5 24.5 2.5 20 10 10 10 15.5 40.5 E 85130 90 16 106 insert 7528 insert and flush transoms 2nd and 3rd level code insert 2 nd level flush transom 2 nd level flush transom + suppl. profile 3 rd level flush transom 3 rd level flush hidden transom + suppl. Profile E 85130 7528 E 85304 E 85300+E85601 E 85354 E 85380+E 85601 scale 1:1 4.6

curtain wall system E 85 mullion 135 cover cap E 85732 pressure plate E 85741 24 118 90 16 10 10 45 16.3 60.8 119.7 insert E 85973 E 85135 76.9 135 76.9 22.5 142.1 insert and flush transoms 2nd and 3rd level scale 1:1 code insert 2 nd level flush transom 2 nd level flush transom + suppl. Profile 3 rd level flush transom 3 rd level flush hidden transom + suppl. profile E 85135 E 85973 E 85304 E 85300+E85601 E 85354 E 85380+E 85601 4.7

curtain wall system E 85 4.8

curtain wall system E 85 inner supplementary mullion profile 90 pressure plate E 85740 any mullion cover cap E 85731 48.2 3.3 14.9 19.8 10.2 90 E 85142 48 14.9 19.8 10.2 3.3 48.2 any mullion scale 1:1 4.9

curtain wall system E 85 outer supplementary mullion profile 90 cover cap E 85713 pressure plate E 85700 4.4 5 35.7 31.3 26.3 44.3 E 85143 5 26.3 31.3 4.4 35.7 pressure plate E 85700 spacer E 85655 cover cap E 85713 any mullion scale 1:1 4.10

curtain wall system E 85 flush transoms 2nd and 3rd level code 3 rd level flush transom 2 nd level flush transom + suppl. profile 3 rd level flush hidden transom + suppl. profile E 85300 - - - E 85301 E 85351 - - E 85302 E 85352 - - E 85303 E 85353 E 85300+E 85600 E 85380+E 85600 E 85304 E 85354 E 85300+E 85601 E 85380+E 85601 E 85305 E 85355 E 85300+E 85602 E 85380+E 85602 E 85306 E 85356 E 85300+E 85603 E 85380+E 85603 E 85307 E 85357 - - 4.11

curtain wall system E85 2nd level transom 2nd level transoms 20 10 20 12.5 2.5 E 85300 10 10 10 10 16 15 31 20 10 20 10 10 10 10 2 1.8 13 12.2 E 85301 16 29 45 1.5 47 1.5 1.8 32.2 E 85302 49 65 2 52 E 85303 69 85 2 72 E 85304 89 105 2 92 E 85305 109 125 2 112 E 85306 129 145 17 2 142 23.5 14 E 85307 159 175 46 2 2 3rd level transom 3rd level transoms E 853 E 85360 6 7 2 27 2 47 2 67 2 87 2 107 2 127 2 157 2 177 2 197 2 226 3 20 10 20 11 9 9 11 20 10 20 11 9 9 11 E 85351 E 85352 E 85353 E 85354 E 85355 E 85356 17 23.5 14 E 85357 E 85358 E 85359 E 85369 2 46 2 10 6 16 10 15 25 35 45 55 65 75 85 95 105 115 125 135 145 165 175 185 195 205 215 235 245 scale 1:1

curtain wall system E 85 2nd level supplementary transoms transom E 85300 15.2 2.5 49.5 1.8 69.5 1.8 89.5 1.8 109.5 1.8 69 6 13.2 2 28 46 11 2 58 55 55.2 58 1.5 1.4 15.2 1.5 E 85600 E 85601 E 85602 E 85603 1.4 89 109 129 3rd level hidden transom 11 E 85380 2 21.2 scale 1:1

curtain wall system E 85 3rd level split transom for conservatory transom E 85370 suppl. profile E 85670 30-90 27.5 E 85370 11 9 10 10 40 55 65 10 supplementary profile for E 85370 2nd level split transom for conservatory transom E 85320 51 30-90 13.2 E 85670 68.9 32 E 85320 10 10 20 10 12 42 29 16 45 scale 1:1 4.14

curtain wall system E 85 sash profile for projected window extruded al. joint corner bracket 54 457 or 53 302 57.8 40.8 17 22.8 E 85200 extruded al. joint corner bracket 54 459 16 55.3 16.5 33.6 24.2 frame for projected window 61.4 38.9 22.5 49 E 85400 32 17 extruded al. joint corner bracket 54 458 extruded al. joint corner bracket 54 457 or 53 302 scale 1:1 4.17

14 curtain wall system E85 pressure plates E 85700 10.2 7.5 10.5 E 85703 25.9 26.5 30 E 85706 35.9 47.6 70.7 165 120 97 E 85707 7.4 E 85701 10.2 15 15.8 E 85704 37.5 36.9 44 28.2 46.4 14 14 80.8 1 105 110.2 41.6 E 85745 10.2 13.4 23.6 22.5 14 21.2 135 89.8 E 85705 31.6 45 47.2 E 85708 53.8 47.6 14 90 119.2 scale 1:1

curtain wall system E 85 cover caps E 85721 10.5 7.5 18 4 1.3 E 85722 15 25 40 8 160 129 1.4 1.4 47.4 4 E 85723 31 69 100 16.3 1.4 1.4 4 47.4 E 85724 31 scale 1:1

curtain wall system E85 cover caps E 85711 47 E 85716 E 85718 13.8 E 85751 12 E 85712 15 60 24.3 7.1 10 7.1 4.9 28.9 16.8 14.4 16.8 E 857 1.5 47.4 16.3 47.4 45.4 48 10.2 47.4 E 85713 5.9 5 E 85719 6.3 20 165 12.5 25 12.5 E 85727 12.3 7.2 5.1 10.5 E 85709 47.4 E 85714 17.4 15.2 17.4 11.3 25 70.4 E 85730 100 12 47.4 E 85715 47.4 16.3 30 16.3 1.5 E 85720 E 85702 47.4 25 5.5 scale 1:1

curtain wall system E 85 cover caps & pressure plates cover cap E 85731 E 85740 30 12 18 cover cap E 85732 42.2 12 18 30 E 85741 13.5 13.5 22.5 90 46.2 45 32 E 85731 21.2 10.8 21.2 10.8 32 20.6 31.5 E 85732 20.6 45 22.5 E 85790 inox E 85791 inox 15 20 90 pressure plate E 85740 45 pressure plate E 85741 51 note: cover caps E 85790 and E 85791 have to be used with special pressure plate! 51 scale 1:1

curtain wall system E 85 spacers for structural glazing 14.8 E 85990 6.8 6 14.8 9.2 24 19.3 glazing clips 43.6 43.6 E 85920 E 85903 8.6 5 10 5 15.3 13 15.3 15.3 13 15.3 spacers for structural glazing 16 11 9 6 9.3 7.3 33 1 33 879 glazing clip for 33 879 22 8.9 4 33 881 10 12 scale 1:1 4.22

curtain wall system E 85 transom connectors transom connector E 85908 4 45.6 45.6 E 85906 E 85907 40 45.7 10 45 base for transom connectors transom connector E 85907 10 42.6 E 85994 E 85908 6.5 15.3 1.5 13.8 13.8 45 25 43.2 reinforced transom connector 60 profile for spring connector 45.6 E 85904 E 85905 scale 1:1 4.23

curtain wall system E 85 inserts 45.2 12.6 6.4 38.2 E 85951 7.2 18.4 58.2 E 85952 7.2 38.4 mullion E 85102 78.2 E 85953 7.2 58.4 143.7 123.9 mullion E 85103 98.2 12.6 6.4 mullion E 85101 E 85954 7.2 78.4 mullion E 85104 mullion E 85106 128.2 20 E 85955 108.4 7.2 mullion E 85105 E 85956 7.2 45.2 44.2 scale 1:1 4.24

curtain wall system E 85 inserts 163.7 6.4 20 E 85957 7.2 143.9 12.6 mullion E 85107 154.7 6.4 20 E 85958 7.2 134.9 12.6 mullion E 85108 scale 1:1 43.6 43.2 4.25

curtain wall system E 85 roof connectors / insert for E 85109 8.2 28.8 8.2 8.2 6.2 28.4 6.2 216 8 5 183.4 181.7 mullion E 85109 E 85960 E 85969 29.2 28.8 7.4 14.4 7.4 8 8.4 5 7.2 14.4 7.2 8 8.4 149.1 8.2 8 scale 1:1 45.2 40.8 4.26

curtain wall system E 85 inserts for half mullions 6.8 6.4 31.9 18.3 mullion E 85152 E 85972 6.8 E 85973 51.9 38.3 6.8 mullion E 85153 E 85974 71.9 58.3 6.8 mullion E 85154 E 85975 101.9 88.3 6.8 mullion E 85155 15.5 scale 1:1 4.27

curtain wall system E 85 reinforcement for transoms E 85802 E 85801 111 156 transom E 85357 transom E 85306 45.4 for transom E 85306 only! 45.4 for transom E 85357 only! scale 1:1 4.28

curtain wall system E 85 spacers E 85640 6 7.5 7.2 6 E 856 37.5 14.1 7.5 E 85654 10 10 10 E 8611 10 10 15 8.6 10 6.2 E 85651 45 17.1 8.5 E 85655 10 E 85641 12 22.5 10.1 6.5 E 85652 10 10 E 85642 18 30 11.9 6.9 E 85653 10 10 supplementary profile for louvers 29.6 7 15.6 7 drainage profile 17.5 11.4 6.1 2 44.2 7.2 32 5 0.9 R3 24.4 4 15.8 40.3 15.5 23.9 E 85911 15.3 23 9.6 10.4 9.6 E 85966 scale 1:1 4.29

curtain wall system E 85 2nd level glazing supports 44.9 6.3 38.6 a = 32 3rd level glazing supports 29.8 3.3 a = 26.5 17.2 E 85902 9.7 E 85912 48.9 6.3 42.6 a = 36 3.3 33.3 a = 30 17.2 E 85916 9.7 E 85917 54.9 6.3 48.6 a = 42 3.3 39.8 a = 36.5 17.2 E 85910 9.7 E 85914 51.5 36 E 85803 E 85804 44.4 15.6 27.6 15.6 2nd level reinforced glazing support 3rd level reinforced glazing support scale 1:1 code accsessory code utility lenght a loadbearing capacity E 85902 071 182 32 mm 1530 N E 85916 071 184 36 mm 1200 N E 85910 071 183 41 mm 6 N E 85912 071 180 26,5 mm 1175 N E 85917 071 185 30 mm 910 N E 85914 071 181 36,5 mm 740 N 15.6 6.4 E 85805 4.30

curtain wall system wall attachment profiles E 85 supplementary profile for holding sealing membrane 46 28 60 1 20 E 85610 40 7.5 37.5 10.6 20.8 29.6 2.5 3 E 85621 74 24.5 14.5 10 E 85611 11 13.5 46 24 5 38 43 40 37.5 33 10 2.5 E 85620 24.5 14.5 10 E 85612 11 13.5 70 spacers for etalbond structural glazing 5 38 43 E 85291 21.1 E 85290 25.1 7 8 23 18.7 5.7 19 12 19 9.3 5.7 11.4 15 7 12.1 scale 1:1 4.31

COVER CAP SECTIONS DETAILS

curtain wall system E 85 mullion with 2nd level transom 1 1 15 10 10 15 tapping screw DIN 7981 ST5.5x45-C-H cover cap E 85713 pressure plate E 85700 25 130 10 28 6 5 15 5 20 butyl seal 133 553 gasket 130 0 min 6 190 89 10 6 16 3 5 5 15 10 10 15 18 20 18 3 gasket 130 470 thermal insulation spacer 80 172 gasket 76 651 flange 76 674 tapping screw DIN 7981 ST4.8x19-C-H fixing part 71 113 transom E 85304 6 41 mullion E 85104 scale 3/4 E85CP5.1 5.1

curtain wall system E 85 transom 2nd level drainage cover cap E 85712 min 6 pressure plate E 85700 gasket 130 0 butyl seal 133 553 tapping screw DIN 7981 ST5.5x45-C-H gasket 130 470 flange 76 674 15 10 5 10 56.3 15 fixing part 71 113 transom E 85304 gasket 76 651 behind thermal insulation spacer 80 172 glazing shim 71 183 PVC spacer 9020 5 15 5 6 16 6 10 89 41 25 28 10 mullion E 85104 130 note: 1. in case of 2nd level drainage, it is obligatory to use 1 mm butyl seal tape in both directions of the cross zone. see detail E85M8.29 / 8.29 2. in case of roof constructions, conservatories, facades with inclinations and polygonal facades with 2nd level drainage, it is obligatory to use butyl seal tape in both directions. scale 3/4 E85CP5.2 5.2

curtain wall system E 85 transom 2nd level drainage with supplementary transom cover cap E 85712 pressure plate E 85700 gasket 130 0 butyl seal 133 553 tapping screw DIN 7981 ST5.5x45-C-H gasket 130 470 10 5 10 min 6 15 tapping screw DIN 7981 ST4.8x19-C-H 15 58 tapping screw DIN 7981 ST4.8x19-C-H transom profile E 85602 transom E 85300 EPDM flange 76 653 thermal insulation spacer 80 172 glazing shim 71 184 PVC spacer 9020 5 15 5 6 16 6 10 109 21 25 28 10 mullion E 85104 130 note: 1. in case of 2nd level drainage, it is obligatory to use 1 mm butyl seal tape in both directions of the cross zone. see detail E85M8.29 / 8.29 2. in case of roof constructions, conservatories, facades with inclinations and polygonal facades with 2nd level drainage, it is obligatory to use butyl seal tape in both directions. scale 3/4 E85CP5.3 5.3

curtain wall system E 85 transom 3rd level drainage cover cap E 85712 pressure plate E 85700 gasket 130 0 butyl seal 133 553 tapping screw DIN 7981 ST5.5x45-C-H gasket 130 474 glazing shim 71 185 15 5 10 10 56.3 15 flange 76 664 fixing part 71 113 transom E 85354 silicone flange 76 680 behind thermal insulation spacer 80 172 PVC spacer 9020 mullion E 85104 5 15 5 28 4 95 41 25 6 16 6 10 130 note: in case of 3rd level drainage, it is obligatory to use butyl seal tape in both directions. scale 3/4 E85CP5.4 5.4

curtain wall system E 85 projected thermo-break window gasket 130 706 gasket 130 457 glass support E 85615 gasket 130 131 33 9 14.4 14.2 10.8 10 15 45.8 1 cover cap E 85713 pressure plate E 85700 gasket 130 0 structural seal 6 mm norton tape 6x6.4 mm 25 6 28 16 6 6 31 16 16 6 6 6 6 butyl seal 133 533 28 56 gasket 130 176 sash E 85210 spacer 700R gasket 130 461 friction arm 400R/600R operating rod E 2308 striker 255 602 striker 255 603 7 10 frame E 85410 20 8 gasket 130 413 38.5 2 15 10 10 15 18 20 18 3 77 7 gasket 130 470 thermal insulation spacer 80 172 mullion E 85104 gasket 130 180 36 transom E 85304 41 scale 3/4 E85CP5.5 5.5

curtain wall system E 85 projected thermo-break window with 2nd level transom 28 20 5 6 16 6 7 56 77 gasket 130 176/P6 sash E 85210 norton tape 6x6.4 mm structural seal 6 mm gasket 130 131 gasket 130 457 gasket 130 706 14.4 9 33 38.5 8 20 2 gasket 130 461 operating rod E 2308 self-drilling screw DIN 7981 ST4.8x32-M-Z gasket 130 180 striker 255 602 striker 255 603 frame E 85410 gasket 130 413 transom E 85304 36 6 45.8 31 7 glazing shim 71 183 gasket 130 0 gasket 130 470 thermal insulation spacer 80 172 5 15 5 6 16 6 10 89 41 20 5 28 10 130 scale 3/4 E85CP5.6 5.6

curtain wall system E 85 projected thermo-break window with 3rd level transom 28 20 5 6 16 6 7 56 77 norton tape 6x6.4 mm structural seal 6 mm gasket 130 131 gasket 130 706 33 14.4 9 45.8 38.5 8 20 36 2 gasket 130 176 sash E 85210 gasket 130 461 operating rod E 2308 self-drilling screw DIN 7981 ST4.8x32-M-Z gasket 130 180 striker 255 602 striker 255 603 frame E 85410 gasket 130 413 transom E 85304 31 1 glazing shim 71 185 gasket 130 0 gasket 130 474 thermal insulation spacer 80 172 5 15 5 6 16 6 10 89 41 scale 3/4 E85CP5.7 5.7

curtain wall system E 85 parallel opening thermo-break window gasket 130 706 gasket 130 457 glass support E 85615 gasket 130 131 33 9 14.4 14.2 10.8 10 15 45.8 1 cover cap E 85713 pressure plate E 85700 structural seal 6 mm gasket 130 0 norton tape 6x6.4 mm 25 6 28 16 6 6 16 31 16 6 6 6 6 butyl seal 133 533 28 sash E 85211 gasket 130 461 friction arm 900R/900L operating rod E 2308 frame E 85410 20 8 38.5 2 15 10 10 15 18 20 18 3 77 7 gasket 130 176 / P6 7 10 gasket 130 470 56 23.5 thermal insulation spacer 80 172 gasket 130 180 36 transom E 85304 gasket 130 413 41 mullion E 85104 scale 3/4 E85CP5.8 5.8

curtain wall system E 85 parallel opening thermo-break window with 2nd level transom 28 20 5 6 16 6 7 56 77 gasket 130 176/P6 sash E 85211 norton tape 6x6.4 mm structural seal 6 mm gasket 130 131 gasket 130 457 gasket 130 706 9 33 38.5 8 20 gasket 130 461 operating rod E 2308 self-drilling screw DIN 7981 ST4.8x32-M-Z gasket 130 180 friction arm 900R/900L frame E 85410 gasket 130 413 transom E 85304 14.4 36 6 45.8 2 31 7 glazing shim 71 183 gasket 130 0 gasket 130 470 thermal insulation spacer 80 172 5 15 5 6 16 6 10 89 41 20 5 28 10 130 scale 3/4 E85CP5.9 5.9

curtain wall system E 85 parallel opening thermo-break window with 3rd level transom 28 20 5 6 16 6 7 56 77 norton tape 6x6.4 mm structural seal 6 mm gasket 130 131 gasket 130 706 33 14.4 9 45.8 38.5 8 20 36 2 gasket 130 176 / P6 sash E 85211 gasket 130 461 operating rod E 2308 self drilling screw DIN 7981 ST4.8x32-M-Z gasket 130 180 friction arm 900R/900L frame E 85410 gasket 130 413 transom E 85304 31 1 glazing shim 71 180 gasket 130 0 gasket 130 474 thermal insulation spacer 80 172 5 15 5 6 16 6 10 89 41 scale 3/4 E85CP5.10 5.10

curtain wall system E 85 projected window tapping screw DIN 7981 ST5.5x45-C-H cover cap E 85713 thermal insulation spacer 80 172 thermal insulation spacer 80 177 1 25 10 15 1 pressure plate E 85700 structural seal 6 mm butyl seal 133 553 norton tape 6x6.4 mm 41 46.9 10.3 39.9 4 26 20 6 14 6 gasket 130 175 profile 8902 gasket 130 180 friction arm 400R/600R sash E 85200 gasket 130 180 frame E 85400 gasket 130 458 gasket 130 409 transom E 85304 14.3 4 65.3 37.3 10 51 12 26 2 3 3 15 10 10 15 18 20 18 25 gasket 130 0 10 6 16 6 28 gasket 130 470 spacer E 85640 mullion E 85104 scale 3/4 E85CP5.11 5.11

curtain wall system E 85 projected window with 2nd level transom 6 14 6 gasket 130 175 25 26 4 39.9 10.3 87.9 gasket 130 180 sash E 85200 norton tape 6x6.4 mm structural seal 6 mm gasket 130 458 10 37.3 4 2 51 14.3 65.3 gasket 130 180 frame E 85400 gasket 130 409 spacer E 85640 thermal insulation spacer 80 177 gasket 130 470 thermal insulation spacer 80 172 butyl seal 133 553 tapping screw DIN 7981 ST5.5x45-C-H gasket 130 0 transom E 85304 mullion E 85104 5 15 5 6 16 6 10 89 41 20 5 28 10 130 scale 3/4 E85CP5.12 5.12

curtain wall system E 85 projected window with 3rd level transom 6 14 6 gasket 130 175 25 26 4 39.9 10.3 87.9 gasket 130 180 sash E 85200 norton tape 6x6.4 mm structural seal 6 mm gasket 130 458 10 37.3 4 51 14.3 65.3 gasket 130 180 frame E 85400 gasket 130 409 gasket 130 0 2 butyl seal 133 553 thermal insulation spacer 80 177 gasket 130 474 thermal insulation spacer 80 172 tapping screw DIN 7981 ST5.5x45-C-H transom E 85354 mullion E 85104 5 15 5 6 16 6 4 6 89 41 20 5 28 10 130 scale 3/4 E85CP5.13 5.13

curtain wall system E 85 window in curtain wall thermal insulation spacer 80 172 41.5 5 gasket 130 470 additional profile E 85641 gasket 130 152 102 55.5 14 11 10 15 1 cover cap E 85713 pressure plate E 85700 15 gasket 130 411 gasket 130 161 gasket 130 0 39 6 12 28 16 9.5 6 8 16.5 5 gasket 130 470 gasket 130 177 glazing bead 5380 21 53.5 26.5 103 2 gasket 130 413 sash E 2482 gasket 130 131 frame E 2424 100.5 transom E 85304 mullion E 85104 scale 3/4 E85CP5.14 5.14

curtain wall system E 85 window in curtain wall with 2nd level transom 28 gasket 130 411 20 5 8 6 16 6 39 gasket 130 177 glazing bead 5380 103 55.5 5 42.5 21 gasket 130 152 gasket 130 161 additional profile E 85641 gasket 130 470 26.5 53.5 2 103 59.5 sash E 2482 gasket 130 131 frame E 2424 gasket 130 413 tapping screw DIN 7981 ST5.5x45-C-H 16.5 9.5 12 glazing shim 71 184 PVC spacer 9020 thermal insulation spacer 80 172 15 5 28 10 transom E 85304 gasket 130 470 mullion E 85104 scale 3/4 E85CP5.15 5.15

curtain wall system E 85 window in curtain wall with 3rd level transom 28 20 5 8 6 16 6 39 gasket 130 177 gasket 130 411 glazing bead 5380 102 21 55.5 5 41.5 gasket 130 152 gasket 130 161 additional profile E 85640 gasket 130 470 26.5 53.5 2 103 59.5 sash E 2482 gasket 130 131 frame E 2424 gasket 130 413 tapping screw DIN 7981 ST5.5x45-C-H 16.5 9.5 6 glazing shim 71 185 PVC spacer 9020 thermal insulation spacer 80 172 transom E 85354 15 5 28 4 6 gasket 130 474 scale 3/4 mullion E 85104 E85CP5.16 5.16

curtain wall system E 85 door in curtain wall cover cap E 85713 pressure plate E 85700 tapping screw DIN 7981 ST5.5x45-C-H thermal insulation spacer 80 172 92 134.9 5 35.9 2 18.3 6.7 10 15 1 gasket 130 470 gasket 130 152 gasket 130 411 gasket 130 177 17.1 gasket 130 0 21 46 5 60.9 134.9 glazing bead E 5307 sash E 2443 gasket 130 152 frame E 2445 2 108.4 28 6 16 10 28 6 8 butil seal 133 5 31.6 gasket 130 470 gasket 130 413 transom E 85304 mullion E 85104 scale 3/4 E85CP5.17 5.17

curtain wall system E 85 door in curtain wall with 2nd level transom tapping screw DIN 7981 ST5.5x45-C-H thermal insulation spacer 80 172 glazing shim 71 183 15 5 28 10 transom E 85304 18.3 6.7 10 2 35.9 15 12.1 28 10 2 gasket 130 413 67.4 41 gasket 130 470 134.9 5 92 21 46 5 60.9 134.9 mullion E 85104 frame E 2445 gasket 130 152 sash E 2443 glazing bead E 5307 scale 3/4 8 6 16 6 31.6 28 gasket 130 177 gasket 130 411 E85CP5.18 5.18

curtain wall system E 85 door in curtain wall with 3rd level transom 15 5 28 10 tapping screw DIN 7981 ST5.5x45-C-H gasket 130 474 thermal insulation spacer 80 172 glazing shim 71 185 transom E 85354 2 18.3 35.9 6.7 10 15 12.1 28 10 2 gasket 130 413 67.4 41 gasket 130 474 134.9 5 92 21 46 5 60.9 134.9 frame E 2445 mullion E 85104 gasket 130 152 sash E 2443 glazing bead E 5307 scale 3/4 8 6 16 6 31.6 28 gasket 130 177 gasket 130 411 E85CP5.19 5.19

curtain wall system E 85 split mullion 1 1 15 10 10 15 tapping screw DIN 7981 ST5.5x45-C-H cover cap E 85713 pressure plate E 85700 25 5 15 5 20 butyl seal 133 553 gasket 130 0 6 28 6 min 6 10 10 16 173 1 15 10 10 15 16 20 16 1 gasket 130 470 thermal insulation spacer 80 172 gasket 76 651 flange 76 674 89 tapping screw DIN 7981 ST4.8x19-C-H gasket 130 198 110 11.5 32 6.5 gasket 130 199 supplementary profile E 851 mullion E 85153 fixing part 71 113 transom E 85304 21 22.5 5 22.5 self-drilling screw DIN 7981 ST3.5x18-M-Z supplementary profile E 85151 gasket 130 199 scale 3/4 E85CP5.20 5.20

curtain wall system E 85 outer corner 90 90 94 10 6 100 seal 10 mm silicone coating soft insulation 40 mm etalbond min 6 110 min 6 100 mullion E 85130 tapping screw DIN 7981 ST4.8x19-C-H gasket 076 651 gasket 130 457 1 transom E 85304 90 7 6 16 6 5 15 28 5 15 note: it is necessary to calculate measures for each project scale 3/4 E85CP5.23 5.23

curtain wall system E 85 outer corner 90 90 etalbond hard insulation thermal insulation spacer 80 174 suppl. mullion profile E 85143 gasket 130 457 15 10 15 10 20.4 25 spacer E 85655 35.4 35.4 20.4 25 tapping screw DIN 7981 ST5.5x45-C-H 15 10 15 10 scale 3/4 transom E 85354 89 7 6 16 6 28 E85CP5.24 5.24

curtain wall system outer corner 90 E 85 90 tapping screw DIN 7981 ST5.5x45-C-H max 0 22 10 6 5 15 7 28 5 20 89 7 6 16 6 5 15 5 thermal Insulation spacer 80 174 gasket 130 457 welded seam 3 mm seal 10 mm seal 10 mm 10 28 min 6 23 130 flange 76 674 max 0 transom E 85304 41 mullion E 85104 note: the glass thickness should be checked by the facade engineer not to scale E85CP5.26 5.26

curtain wall system E 85 inner corner 90 90 gasket 130 0 cover cap E 85731 pressure plate E 85740 28 7 130 41 89 7 6 16 6 15 130 145 suppl. mullion profile E 85142 thermal insulation spacer 80 172 tapping screw DIN 7981 ST5.5x45-C-H tapping screw DIN 7981 ST5.5x16-C-H scale 3/4 E85CP5.28 5.28

curtain wall system E 85 inner corner 135 135 tapping screw DIN 7981 ST5.5x38-C-H cover cap E 85732 pressure plate E 85741 gasket 130 0 thermal insulation spacer 80 174 mullion E 85135 1 5 21.6 26.6 5 89 7 6 16 6 90 7 28 gasket 130 457 flange 76 674 tapping screw DIN 7981 ST4.8x19-C-H 135 transom E 85304 scale 3/4 E85CP5.30 5.30

curtain wall system E 85 outer corner 30-90 3090 L-profile section 4134 etalbond soft insulation 30-90 cover cap E 85713 tapping screw DIN 7981 ST5.5x38-C-H pressure plate E 85700 butyl seal 133 553 gasket 130 0 butyl seal self drilling screw DIN 7981 ST4.8x19-M-Z 15 7 6 16 6 28 90 9.5 transom E 85300 split rotating mullion E 85141 suppl. mullion E 85140 tapping screw DIN 7981 ST5.5x32-C-H mullion E 85102 scale 3/4 E85CP5.31 5.31

curtain wall system E 85 polygonal facade with outer angle max 5 5 1 15 10 10 15 1 tapping screw DIN 7981 ST5.5x45-C-H cover cap E 85713 pressure plate E 85700 butyl seal 133 553 gasket 130 0 20 28 39 15 5 6 16 6 4 35 gasket 130 470 thermal insulation spacer 80 172 flange 76 661 3 15 10 10 15 3 transom E 85351 mullion E 85101 polygonal facade with inner angle max 5 5 20 5 15 1 1 15 10 10 15 tapping screw DIN 7981 ST5.5x45-C-H cover cap E 85713 pressure plate E 85700 butyl seal 133 553 gasket 130 0 6 28 16 6 4 39 35 gasket 130 470 thermal insulation spacer 80 172 flange 76 661 3 15 10 10 15 3 transom E 85351 mullion E 85101 scale 3/4 E85CP5.32 5.32

12 5 6 16 6 4 17 28 4 curtain wall system E 85 outer angles 0 ~15 tapping screw DIN 7981 ST5.5x55-C-H cover cap E 85711 pressure plate E 85703 0-15 butyl seal 133 553 gasket 130 0 5 10 5 gasket 130 474 spacer E 856 thermal insulation spacer 80 172 outer angles 7.5 ~22.5 tapping screw DIN 7981 ST5.5x55-C-H cover cap E 85711 pressure plate E 85704 7.5-22.5 butyl seal 133 553 gasket 130 0 12 5 6 16 6 4 17 28 4 5 10 5 gasket 130 474 spacer E 85651 scale 3/4 thermal insulation spacer 80 172 E85CP5.33 5.33

curtain wall system E 85 outer angles 15 ~30 tapping screw DIN 7981 ST5.5x60-C-H cover cap E 85711 pressure plate E 85705 15-30 butyl seal 133 553 gasket 130 0 thermal insulation spacer 80 172 gasket 130 474 spacer E 85652 12 5 6 16 6 17 28 4 4 5 10 5 outer angles 22.5 ~37.5 tapping screw DIN 7981 ST5.5x60-C-H cover cap E 85711 22.5-37.5 pressure plate E 85706 butyl seal 133 553 gasket 130 0 thermal insulation spacer 80 172 gasket 130 474 12 5 6 16 6 4 17 28 4 spacer E 85653 5 10 5 scale 3/4 E85CP5.34 5.34

curtain wall system E 85 outer angles 30 ~45 tapping screw DIN 7981 ST5.5x60-C-H cover cap E 85711 pressure plate E 85707 30-45 butyl seal 133 553 gasket 130 0 thermal insulation spacer 80 172 gasket 130 474 spacer E 85654 12 5 6 16 6 4 17 28 4 5 10 5 outer angles 37.5 ~52.5 tapping screw DIN 7981 ST5.5x60-C-H cover cap E 85711 pressure plate E 85708 37.5-52.5 butyl seal 133 553 thermal insulation spacer 80 172 gasket 130 0 gasket 130 474 spacer E 85655` 12 5 6 16 6 4 17 28 4 5 10 5 scale 3/4 E85CP5.35 5.35

curtain wall system E 85 roof connector tapping screw DIN 7981 ST5.5x68-C-H cover cap E 85711 pressure plate E 85706 butyl seal gasket 130 0 thermal insulation spacer 80 172 12 5 2 19 gasket 130 470 spacer E 85653 0.35 6 14 4 4 4 28.35 4 transom E 85305 mullion connector E 85960 below mullion E 85104 scale 3/4 E85CP5.36 5.36

5.37 scale 1:2 1 1 15 10 10 15 tapping screw DIN 7981 ST5.5x45-C-H cover cap E 85713 pressure plate E 85700 butyl seal 133 553 gasket 130 0 gasket 130 470 thermal insulation spacer 80 172 gasket 76 651 flange 76 674 12.5 43 10 28 10 6 16 6 5 15 255 transom E 85305 mullion E 85104 gypsum board soft insulation mm 1 1 15 10 10 15 connection between curtain wall and partition wall curtain wall system E 85 E85CP5.37

5.38 scale 1:2 transom E 85305 gasket 76 651 flange 76 674 mullion E 85104 1 1 15 10 10 15 gasket 130 470 tapping screw DIN 7981 ST5.5x45-C-H cover cap E 85713 pressure plate E 85700 butyl seal 133 553 gasket 130 0 thermal insulation spacer 80 172 bracket 71090 255 thermal insulation spacer 80 177 sheet aluminium 2 mm membrane 2 mm insulation soft 208 40 130 10 24 2 2 1 1 15 10 10 15 delatation curtain wall system E 85 E85CP5.38

curtain wall system E 85 connection with backing wall concrete wall membrane 2 mm hard insulation mm plaster seal 2 mm etalbond butyl seal 133 553 4 1 17 gasket 130 470 thermal insulation spacer 80 172 additional profile E 85620 41 89 10 6 16 6 5 15 130 10 28 20 scale 3/4 E85CP5.39 5.39

curtain wall system E 85 connection with rainscreen cladding system Forte stone 8 forte system by ETEM metal aluminum sheet hard insulation membrane soft insulation additional profile E 85611 51 43 34 30 41 49 10 28 5 25 suppl. profile E 85610 scale 3/4 E85CP5.41 5.41

curtain wall system E 85 conservatories vertical section with 2nd level transom 135 cover cap E 85730 thermal insulation spacer 80 174 tapping screw DIN 7981 ST5.5x38-C-H pressure plate E 85701 butyl seal 133 553 etalbond hard insulation 17 mm membrane 1 mm 29 20 5 6 14 8.4 7 110 gasket 130 457 glazing shim 71 184 32 transom E 85320 gasket 130 199 tapping screw DIN 7981 ST5.5x38-C-H 32 135 thermal insulation spacer 80 174 accessory 74 674 gasket 130 457 machine cutting for transom slot scale 3/4 E85CP5.42 5.42

curtain wall system E 85 conservatories vertical section with 3rd level transom 90-1 20 cover cap E 85730 thermal insulation spacer 80 174 tapping screw DIN 7981 ST5.5x38-C-H pressure plate E 85701 butyl seal 133 553 etalbond hard insulation 30 mm membrane 1 mm 5 6 28.4 14 8.4 3 55 gasket 130 473 transom E 85370 suppl. profile E 85670 glazing shim 71 185 30-90 tapping screw DIN 7981 ST5.5x38-C-H thermal insulation spacer 80 174 gasket 130 473 accessory 74 674 scale 3/4 20 5 28 9 E85CP5.43 5.43

curtain wall system E 85 conservatories vertical section 90-1 pressure plate E 85701 cover cap E 85730 self-drilling screw DIN 7981 ST4.8x19-M-Z 28.4 113.2 20 20 5 6 14 8.4 7 89 41 thermal insulation spacer 80 174 gasket 130 457 5 4 glazing shim 71 180 tapping screw DIN 7981 ST5.5x38-C-H mullion is trimmed 4 4 etalbond hard insulation 26 mm membrane 1 mm etalbond thermal insulation spacer 80 184 113.2 100.7 cut for membrane in mullion F profile 31064 67.4 tapping screw DIN 7981 ST4.2x25-C-H 5 tapping screw DIN 7981 ST5.5x38-C-H thermal insulation spacer 80 174 gasket 130 457 20 5 6 16 6 7 89 41 25 28 7 130 not to scale E85CP5.44 5.44

curtain wall system E 85 conservatories vertical section 115 pressure plate E 85701 cover cap E 85730 131 13.9 117.2 20 5 6 14 8.4 7 89 41 thermal insulation spacer 80 174 tapping screw DIN 7981 ST5.5x38-C-H gasket 130 457 glazing shim 71 184 seal 10 mm mullion connector E 85969 below 96.8 10 14.4 10 82.4 15 10 seal 10 mm 20 5 6 16 6 7 89 41 115 tapping screw DIN 7981 ST5.5x38-C-H 10 15 5 glazing shim 71 184 thermal insulation spacer 80 174 gasket 130 457 20 5 6 16 6 7 89 41 25 28 7 130 note: the glass thickness should be checked by the facade engineer scale 3/4 E85CP5.45 5.45

curtain wall system E 85 conservatories vertical section 20 5 6 14 8.4 6.7 89 tapping screw DIN 7981 ST4.2x32-C-H soft insulation 40 mm 166.8 47.7 seal 10 mm silicone coating etalbond 96.4 10 115 note: 20 5 6 16 6 7 89 41 the glass thickness should be checked by the facade engineer scale 3/4 E85CP5.46 5.46

curtain wall system E 85 slope > 25 tapping screw DIN 7981 ST5.5x45-C-H butyl seal 133 553 cover cap E 85730 pressure plate E 85701 gasket 130 0 8 >25 12 20 5 6 14 4 0.35 28.35 gasket 130 470 thermal insulation spacer 80 172 glazing shim 71 183 transom E 85304 mullion E 85104 4 10 89 scale 3/4 E85CP5.47 5.47

>15 curtain wall system E 85 slope > 15 pressure plate E 85702 tapping screw DIN 7981 ST5.5x45-C-H gasket 130 126 silicone gasket 130 705 18 6 2 20 5 6 14 4 0.35 28.35 gasket 130 470 thermal insulation spacer 80 171 glazing shim 71 184 transom E 85304 mullion E 85104 4 10 89 scale 3/4 E85CP5.48 5.48

2 1.2 28.35 >7 curtain wall system E 85 slope > 7 flat bar 9070 / x2 mm tapping screw DIN 7981 ST5.5x45-C-H silicone gasket 130 705 butyl seal 133 553 22 20 5 6 14 4 0.35 gasket 130 470 thermal insulation spacer 80 171 4 10 89 glazing shim 71 184 transom E 85304 mullion E 85104 scale 3/4 E85CP5.49 5.49

curtain wall system E 85 connection with backing wall aluminium sheet 1.5 mm seal 5 mm hard insulation mm aluminium sheet 1.5 mm 61.5 1.5 1 membrane 1 mm 46.5 4.5 5 10 10 hard insulation 25 mm membrane 1 mm hard insulation 31.5 mm self-drilling screw DIN 7981 ST4.2x16-O-Z 1.5 25 1 31.5 1 1.5 89 41 bracket E 85913 reinforced concrete not to scale 40 E85CP5. 5.

curtain wall system E 85 bottom finishing water drainage gasket 130 0 thermal insulation spacer 80 177 additional profile E 85612 cut for membrane in mullion etalbond hard insulation 60 mm 24 38 27 4 bracket 71 0 hard insulation membrane 30 plaster hard insulation mm scale 3/4 E85CP5.51 5.51

curtain wall system E 85 bottom finishing water drainage 20 5 28 10 109 21 vapor barrier membrane aluninium sheet thermal insulation spacer 80 177 tile hard insulation additional profile E 85612 cut for membrane in mullion membrane ground tiles scale 1:2 E85CP5.52 5.52

curtain wall system E 85 finishing to suspended ceiling water drainage mullion E 85104 transom E 85306 gasket 130 470 28 20 5 6 16 6 10 glazing shim 71 183 butyl seal 133 553 sheet steel 1.5 mm tapping screw DIN 7981 ST5.5x45-C-H thermal insulation spacer 80 172 thermal insulation spacer 80 177 additional profile E 85612 cut for membrane in mullion etalbond bracket 71 270 washer DIN 440 membrane concrete slab hard insulation 60 mm perforation tube aluminum 60x30x2 self-drilling screw DIN 7981 ST5.5x19-M-Z vivo system by ETEM not to scale E85CP5.53 5.53

curtain wall system E 85 finishing of plaster ceiling L-profile section 4065 self-drilling screw DIN 7981 ST4.8x19-M-Z 90 etalbond membrane membrane additional profile E 85612 60 30 hard insulation 32 mm thermal insulation spacer 80 177 4 24 10 33 76 bracket 71 0 transom E 85305 20 5 6 16 6 10 25 28 10 mullion E 85104 gasket 130 470 thermal insulation spacer 80 172 scale 3/4 E85CP5.54 5.54

curtain wall system E 85 outer angle vertical section 25 28 7 130 gasket 130 457 20 5 6 16 6 7 89 41 thermal insulation spacer 80 174 tapping screw DIN 7981 ST5.5x45-C-H 15 10 10 15 thermal insulation spacer 80 177 28 hard insulation 20 mm 20 5 4 20 4 96 etalbond mullion E 85104 mullion connector E 85960 below 15 10 10 15 not to scale E85CP5.55 5.55

curtain wall system E 85 inner angle vertical section 5 15 10 10 15 41 16 6 130 20 5 6 16 6 7 89 41 86.6 86.6 mullion E 85104 10 5 86.6 10 86.6 15 20 5 6 16 6 7 89 mullion connector E 85960 below tapping screw DIN 7981 ST5.5x45-C-H 15 thermal insulation spacer 80 174 gasket 130 457 not to scale 20 5 6 16 6 7 89 41 25 28 7 130 E85CP5.56 5.56

scale 1:2 3M tape profile E 8656 profile E 8863 glass spandrel panel in brustung zone curtain wall system thermal insulation spacer 80 177 transom E 85380 sheet steel 2 mm laminated glass 4.4.1 soft insulation bracket 71 072 washer DIN 440 steel sheet 2 mm fire resistant silicone (12 C) perforation mullion E 85104 0.38 25 4 min 30 4 transom E 85305 glazing shim 71 183 butyl seal 133 553 tapping screw DIN 7981 ST5.5x45-C-H gasket 130 0 thermal insulation spacer 80 172 E85 E85CP5.57

scale 1:2 transom E 85305 gasket 130 470 etalbond spandrel panel in brustung zone curtain wall system glazing shim 71 183 gasket 130 0 membrane butyl seal 133 553 tapping screw DIN 7981 ST5.5x45-C-H thermal insulation spacer 80 172 gasket 130 480 min 5 thermal insulation spacer 80 177 2 2 20 123 4 2 151 aluminium sheet 2 mm etalbond steel sheet 2 mm soft insulation 130 bracket 71 072 washer DIN 440 steel sheet 2 mm fire resistant silicone (12 C) mullion E 85104 transom E 85305 thermal insulation spacer 80 177 gasket 130 0 butyl seal 133 553 tapping screw DIN 7981 ST5.5x45-C-H gasket 130 480 membrane thermal insulation spacer 80 172 gasket 130 470 E85 E85CP5.59

scale 1:2 soft insulation connection with rainscreen system Forte curtain wall system forte system by ETEM hard insulation membrane thermal insulation spacer 80 184 thermal insulation spacer 80 174 8 pressure plate E 85700 cover cap E 85720 transom E 85304 bracket 71 0 25 5 28 10 89 gasket 130 470 gasket 130 470 glazing shim 71 184 transom E 85300 25 5 28 10 15 thermal insulation spacer 80 174 pressure plate E 85700 glazing shim 71 184 gasket 130 470 transom E 85304 cover cap E 85720 bracket 71 0 membrane 47 additional profile E 85611 metal aluminum sheet bracket E 85967 forte system by ETEM membrane E85 E85CP5.60

curtain wall system E 85 usage of hidden transom on floor level gasket 130 474 transom E 85380 self-drilling screw DIN 7981 ST4.8x19-M-Z steel sheet 2 mm waterproof gypsum board washer DIN 440 bracket 71 072 steel sheet 2 mm soft insulation fire resistant silicone (12 C) 25 28 20 5 6 16 6 10 min 30 12.5 2 21 mullion E 85104 transom E 85305 gasket 130 470 glazing shim 71 183 butyl seal 133 553 tapping screw DIN 7981 ST5.5x45-C-H gasket 130 0 thermal insulation spacer 80 172 not to scale E85CP5.61 5.61

curtain wall system E 85 upper finishing with etalbond 10 min 6 etalbond membrane thermal insulation spacer 80 177 thermal insulation spacer 80 172 soft insulation gypsum board min 30 bracket 71 270 gasket 130 470 glazing shim 71 183 mullion E 85104 not to scale thermal insulation spacer 80 172 tapping screw DIN 7981 ST5.5x45-C-H transom E 85305 E85CP5.62 5.62

STRUCTURAL GLAZING SECTIONS DETAILS

curtain wall system E 85 mullion with 2nd level transom silicone seal silicone gasket 130 705 15 20 15 10 10 tapping screw DIN 7982 ST5.5x25-C-H glazing clip 71 116 spacer E 85990 15 6 32 6 6 20 6 gasket 130 463 gasket 76 651 flange 76 674 89 5 5 tapping screw DIN 7981 ST4.8x19-C-H 130 3 15 10 10 15 18 20 18 3 fixing part 71 113 41 6 transom E 85304 mullion E 85104 scale 3/4 E85SG6.1 6.1

curtain wall system E 85 transom 2nd level drainage spacer E 85990 glazing clip 71 116 gasket 130 463 flange 76 674 mullion E 85104 glazing shim 71 184 10 15 20 10 5 15 tapping screw DIN 7982 ST5.5x25-C-H 56.3 fixing part 71 113 transom E 85304 gasket 076 651 behind thermal insulation spaser 80 171/80 183 silicone gasket 130 705 silicone seal 6 20 6 6 89 41 32 6 130 note: spacer E 85990 has to be used only with 2nd level transoms scale 3/4 E85SG6.2 6.2

curtain wall system E 85 mullion with 2nd level transom 15 min 6 20 15 10 10 silicone seal silicone gasket 130 705 thermal insulation spaser 80 171/80 183 tapping screw DIN 7982 ST5.5x25-C-H glazing clip 71 130 spacer 33 879 3M tape 28 6 16 6 min 6 12 12 15 gasket 130 480 gasket 76 651 flange 76 674 89 5 5 tapping screw DIN 7981 ST4.8x19-C-H 130 3 15 10 10 15 18 20 18 3 fixing part 71 113 41 6 transom E 85304 mullion E 85104 scale 3/4 E85SG6.3 6.3

curtain wall system E 85 transom 2nd level drainage spacer 33 879 glazing clip 71 130 gasket 130 480 flange 76 674 glazing shim 71 184 15 thermal insulation spaser 80 171/80 183 10 15 20 10 5 tapping screw DIN 7981 ST5.5x25-C-H 56.3 min 6 fixing part 71 113 transom E 85304 gasket 076 651 behind silicone gasket 130 705 silicone seal mullion E 85104 6 16 6 12 89 41 28 12 130 scale 3/4 E85SG6.4 6.4

curtain wall system E 85 transom 3rd level drainage spacer 33 879 glazing clip 71 130 gasket 130 463 glazing shim 71 185 flange 76 664 15 thermal insulation spaser 80 171/80 183 15 20 10 10 5 tapping screw DIN 7981 ST5.5x25-C-H 56.3 min 6 fixing part 71 113 transom E 85354 6 6 silicone flange 76 680 behind silicone gasket 130 705 silicone seal mullion E 85104 6 16 6 12 89 41 28 12 130 scale 3/4 E85SG6.5 6.5

curtain wall system E 85 projected thermo-break window thermal insulation spacer 80 171/80 183 glass support E 85614 silicone seal silicone gasket 130 705 gasket 130 707 gasket 130 479 structural seal 6 mm norton tape 6x6.4 mm 55.5 33.3 1 2 7.9 1.6 20.8 tapping screw DIN 7981 ST5.5x25-C-H glazing clip 71 130 spacer 33 879 + 3M tape 6 6 16 28 16 6 6 6 gasket 130 176 9.2 56 sash E 85210 spacer 700R gasket 130 461 friction arm 400R/600R operating rod E 2308 striker 255 602 striker 255 603 frame E 85410 20 8 38.5 2 3 14 11 10 15 16 21 18 77 7 gasket 130 480 6 gasket 130 180 38.2 transom E 85304 mullion E 85104 41 scale 3/4 E85SG6.6 6.6

curtain wall system E 85 projected thermo-break window with 2nd level transom 6 16 6 7 56 38.2 6 6 16 gasket 130 176 sash E 85210 norton tape 6x6.4 mm structural seal 6 mm gasket 130 479 glass support E 85614 gasket 130 707 55.5 38.5 8 20 gasket 130 461 operating rod E 2308 self-drilling screw DIN 7981 ST4.8x32-M-Z gasket 130 180 striker 255 602 striker 255 603 frame E 85410 transom E 85304 15 14 2 5 33.3 16 1.6 9.2 20.8 2 7.9 1 6 glazing shim 71 182 min 6 fixing part 71 113 transom E 85304 gasket 076 651 behind gasket 130 480 silicone gasket 130 705 silicone seal mullion E 85104 89 41 scale 3/4 130 E85SG6.7 6.7

curtain wall system E 85 projected thermo-break window with 3rd level transom 6 16 6 7 56 38.2 6 6 16 gasket 130 176 sash E 85210 norton tape 6x6.4 mm structural seal 6 mm gasket 130 473 glass support E 85614 gasket 130 707 55.5 38.5 8 20 gasket 130 461 operating rod E 2308 self-drilling screw DIN 7981 ST4.8x32-M-Z gasket 130 180 striker 255 602 striker 255 603 frame E 85410 transom E 85354 15 5 2 7.9 33.3 1.6 14 2 16 1 3 6 20.8 glazing shim 71 180 min 6 1.1 flange 76 664 fixing part 71 113 gasket 076 651 behind gasket 130 463 silicone gasket 130 705 silicone seal mullion E 85104 6 16 6 6 6 89 41 scale 3/4 28 12 130 E85SG6.8 6.8

curtain wall system E 85 parallel opening thermo-break window silicone seal glass support E 85614 gasket 130 707 gasket 130 479 structural seal 6 mm norton tape 6x6.4 mm 55.5 33.3 1 2 7.9 1.6 20.8 silicone gasket 130 705 80 171 / 80183 tapping screw DIN 7981 ST5.5x25-C-H glazing clip 71 130 spacer 33 879 + 3M tape 7 6 6 16 28 16 6 6 6 gasket 130 176 / P6 9.2 sash E 85211 gasket 130 480 gasket 130 461 56 friction arm 900R/900L operating rod E 2308 6 gasket 130 180 38.2 frame E 85410 gasket 130 413 transom E 85304 20 8 79.2 38.5 2 3 14 11 10 15 16 21 18 mullion E 85104 41 scale 3/4 E85SG6.9 6.9

curtain wall system E 85 parallel opening thermo-break window with 2nd level transom 6 16 6 7 56 38.2 norton tape 6x6.4 mm structural seal 6 mm gasket 130 479 glass support E 85614 gasket 130 707 55.5 6 6 16 38.5 8 20 gasket 130 176 / P6 sash E 85211 gasket 130 461 operating rod E 2308 self-drilling screw DIN 7981 ST4.8x32-M-Z gasket 130 180 friction arm 900R/900L frame E 85410 transom E 85304 7.9 33.3 14 2 16 80 171 / 80183 15 20.8 9.2 5 6 glazing shim 71 182 min 6 fixing part 71 113 flange 76 674 gasket 076 651 behind gasket 130 480 silicone gasket 130 705 silicone seal mullion E 85104 89 41 130 scale 3/4 E85SG6.10 6.10

curtain wall system E 85 parallel opening thermo-break window with 3rd level transom 6 16 6 7 56 38.2 6 6 16 gasket 130 176 / P6 sash E 85211 norton tape 6x6.4 mm structural seal 6 mm gasket 130 473 glass support E 85614 gasket 130 707 55.5 38.5 8 20 gasket 130 461 operating rod E 2308 self-drilling screw DIN 7981 ST4.8x32-M-Z gasket 130 180 friction arm 900R/900L frame E 85410 transom E 85354 5 2 7.9 14 2 33.3 16 1 1.6 3 6 20.8 glazing shim 71 180 80 171 / 80183 15 min 6 1.1 flange 76 664 fixing part 71 113 gasket 076 651 behind gasket 130 463 glazing clip 71 130 silicone gasket 130 705 silicone seal mullion E 85104 6 16 6 6 6 89 41 28 12 130 scale 3/4 E85SG6.11 6.11

curtain wall system E 85 window in curtain wall 28 8 6 16 6 9 30.5 gasket 130 177 gasket 130 411 glazing bead 5380 11 117 21 gasket 130 152 gasket 130 161 69.5 5 42.5 53.5 103 sash E 2482 additional profile E 85640 gasket 130 480 26.5 gasket 130 131 frame E 2424 glazing shim 71 185 2 15 21 10 6 11.7 6 transom E 85354 gasket 130 463 mullion E 85104 6 16 6 6 6 89 41 scale 3/4 28 12 130 E85SG6.14 6.14

curtain wall system E 85 outer corner 90 90 silicone seal silicone gasket 130 705 tapping screw DIN 7981 ST5.5x25-C-H glazing clip 71 130 etalbond hard insulatin spacer 33 879 + 3M tape 20 41 gasket 130 480 suppl. mullion profile E 85143 spacer E 85655 20 41 tapping screw DIN 7981 ST5.5x45-C-H transom E 85354 89 12 6 16 6 101 28 scale 3/4 E85SG6.15 6.15

curtain wall system E 85 inner corner 90 90 aluminium tube 7027 silicone seal silicone gasket 130 705 thermal insulation spacer 80 171/80 183 tapping screw DIN 7981 ST5.5x25-C-H glazing clip 71 130 spacer 33 879 3M tape 25.2 130 111 114 130 130 89 12 28 12 6 16 6 25.2 3 gasket 130 480 etalbond welded seam 3 mm 41 3 111 114 transom E 85304 flange 76 674 mullion E 85104 scale 1:2 E85SG6.17 6.17

curtain wall system E 85 inner corner 90 90 silicone seal silicone gasket 130 705 thermal insulation spacer 80 171/80 183 glazing clip 71 130 spacer 33 879 + 3M 12 14 28 15 130 145 suppl. mullion profile E 85142 tapping screw DIN 7981 ST5.5x16-C-H 130 41 89 6 8 6 16 6 gasket 130 458 spacer E 85640 scale 3/4 E85SG6.18 6.18

6 16 28 6 5 curtain wall system E 85 polygonal facade with outer angle max 5 20 silicone seal silicone gasket 130 705 thermal insulation spaser 80 171/80 183 tapping screw DIN 7981 ST5.5x25-C-H glazing clip 71 130 5 40 35 gasket 130 480 flange 76 661 3 15 10 10 15 3 transom E 85351 mullion E 85101 polygonal facade with inner angle max 5 19.9 silicone seal silicone gasket 130 705 thermal insulation spaser 80 171/80 183 tapping screw DIN 7981 ST5.5x25-C-H 5 41 28 35 6 6 16 6 glazing clip 71 130 gasket 130 480 flange 76 661 3 15 10 10 15 3 transom E 85351 mullion E 85101 scale 3/4 E85SG6.19 6.19

curtain wall system E 85 conservatories vertical section 90-1 gasket 130 480 self-drilling screw DIN 7981 ST4.8x19-M-Z 131 20 30.4 6 16 8.4 10 89 41 4 gasket 130 470 glazing shim 71 184 36 27 mullion is trimmed 4 4 etalbond hard insulation membrane 1 mm etalbond thermal insulation spacer 80 184 4 28 1 4 3 104 cut for membrane in mullion F profile 31064 gasket 130 473 131 66 tapping screw DIN 7981 ST4.2x25-C-H 5 20 silicone seal silicone gasket 130 705 glazing clip 71 130 spacer 33 879 gasket 130 480 6 16 6 12 89 41 28 12 130 not to scale E85SG6.20 6.20

curtain wall system E 85 conservatories vertical section 115 184 20 120 30.4 6 16 8.4 10 seal 10 mm 115 10 89 41 gasket 130 470 glazing shim 71 184 seal 10 mm 64 mullion connector E 85969 below 10 48 silicone seal 115 20 99 16 glazing shim 71 184 silicone gasket 130 705 glazing clip 71 130 spacer 33 879 gasket 130 480 6 16 6 12 89 41 28 12 130 note: the glass thickness should be checked by the facade engineer not to scale E85SG6.21 6.21

curtain wall system E 85 connection with backing wall etalbond bravo system by ETEM 122 20 silicone seal silicone gasket 130 705 thermal insulation spaser 80 171/80 183 tapping screw DIN 7981 ST5.5x25-C-H glazing clip 71 130 spacer 33 879 3M tape membrane 1 mm 41 130 12 6 16 6 89 12 28 gasket 130 480 additional profile E 85612 scale 3/4 E85SG6.23 6.23

curtain wall system E 85 bottom finishing gasket 130 480 glazing clip 71 130 thermal insulation spacer 80 171/80 183 silicone seal 20 silicone gasket 130 705 thermal insulation spacer 80 177 additional profile E 85612 cut for membrane in mullion 24 38 concrete slab etalbond bracket 71 0 30 27 4 soft insulation 60 mm membrane L-profile section 4065 self-drilling screw DIN 7981 ST4.8x19-M-Z seal 6 mm plaster perforation hard insulation scale 1:2 E85SG6.24 6.24

curtain wall system E 85 facade finishing to suspended ceiling 28 12 130 6 16 6 12 109 spacer 33 879 glazing clip 71 130 gasket 130 480 flange 76 651 glazing shim 71 182 21 steel sheet 1.5 mm 15 20 15 thermal insulation spacer 80 177 additional profile E 85612 cut for membrane in mullion accessory 74 674 bracket 71 270 washer DIN 440 hard insulation membrane concrete slab etalbond not to scale perforation self-drilling screw DIN 7981 ST4.8x19-M-Z L-profile section aluminum E85SG6.25 6.25

curtain wall system E 85 finishing of plaster ceiling L-profile section 4065 self-drilling screw DIN 7981 ST4.8x19-M-Z etalbond membrane 60 30 membrane additional profile E 85612 hard insulation thermal insulation spacer 80 177 15 20 15 33 76 bracket 71 0 transom E 85305 mullion E 85104 gasket 130 480 scale 3/4 6 16 6 12 109 21 28 12 130 170 E85SG6.26 6.26

curtain wall system E 85 etalbond spandrel panel in brustung zone 170 28 12 130 6 16 6 12 109 spacer 33 879 glazing clip 71 130 gasket 130 480 flange 76 651 21 glazing shim 71 182 transom E 85305 steel sheet 2 mm self-drilling screw DIN 7981 ST4.8x16-M-Z self-drilling screw DIN 7981 ST4.8x19-M-Z thermal insulation spacer 80 177 20 4 4 60 28 60 etalbond 88 soft insulation bracket 71 272 washer DIN 440 steel sheet 2 mm self-drilling screw DIN 7981 ST4.8x16-M-Z mullion E 85104 transom E 85305 thermal insulation spacer 80 177 not to scale E85SG6.27 6.27

curtain wall system E 85 upper finishing with etalbond 10 20 110 glazing clip 71 130 gasket 130 480 6 16 6 12 109 21 40 28 12 130 40 170 soft insulation gypsum board 20 340 min 30 bracket 71 270 washer DIN 440 not to scale mullion E 85104 transom E 85305 E85SG6.28 6.28

COMBINATIONS SECTIONS DETAILS

curtain wall system E 85 combined facade with vertical cap and horizontal silicone joint 15 10 10 15 tapping screw DIN 7981 ST5.5x45-C-H cover cap E 85713 pressure plate E 85700 butyl seal 133 553 25 20 gasket 130 0 195.2 130 12 28 6 89 12 6 16 5 min 6 3 5 5 15 10 10 15 18 20 18 3 gasket 130 473 gasket 130 480 thermal insulation spacer 80 172 gasket 76 651 flange 76 674 tapping screw DIN 7981 ST4.8x19-C-H fixing part 71 113 transom E 85304 6 41 mullion E 85104 scale 3/4 E85K7.1 7.1

curtain wall system E 85 combined facade with vertical cap and horizontal silicone joint spacer 33 879 glazing clip 71 130 gasket 130 463 glazing shim 71 185 flange 76 664 15 thermal insulation spaser 80 171/80 183 15 20 10 10 min 6 5 tapping screw DIN 7981 ST5.5x25-C-H 56.3 min 6 fixing part 71 113 transom E 85354 6 6 silicone flange 76 680 behind silicone gasket 130 705 silicone seal mullion E 85104 20 5 6 16 6 12 89 41 25 28 12 130 scale 3/4 E85K7.2 7.2

curtain wall system E 85 combined facade with vertical cap and horizontal silicone joint with projected thermo-break window gasket 130 706 gasket 130 479 glass support E 85615 gasket 130 131 structural seal 6 mm norton tape 6x6.4 mm 33 9 14.4 14.2 10.8 10 15 45.8 tapping screw DIN 7981 ST5.5x45-C-H cover cap E 85713 pressure plate E 85700 butyl seal 133 553 gasket 130 0 6 6 6 16 28 16 16 28 6 6 6 25 6 gasket 130 473 56 gasket 130 176 / P6 sash E 85210 spacer 700R gasket 130 461 friction arm 400R/600R 9 operating rod E 2308 striker 255 602 striker 255 603 frame E 85410 20 8 38.5 2 3 15 10 10 15 18 20 18 79.2 7 31 gasket 130 480 12 gasket 130 180 38.2 transom E 85304 41 mullion E 85104 scale 3/4 E85K7.3 7.3

curtain wall system E 85 combined facade with vertical cap and horizontal silicone joint with 3rd level transom and projected thermo-break window 6 16 6 7 56 38.2 6 6 16 gasket 130 176 / P6 sash E 85210 norton tape 6x6.4 mm structural seal 6 mm gasket 130 473 glass support E 85614 gasket 130 707 55.5 38.5 8 20 gasket 130 461 operating rod E 2308 self-drilling screw DIN 7981 ST4.8x32-M-Z gasket 130 180 striker 255 602 striker 255 603 frame E 85410 transom E 85354 2 7.9 14 33.3 1.6 2 16 1 3 6 20.8 15 min 6 5 glazing shim 71 185 glazing clip 71 130 thermal insulation spaser 80 171/80 183 min 6 1.1 flange 76 664 fixing part 71 113 gasket 076 651 behind gasket 130 463 silicone gasket 130 705 silicone seal mullion E 85104 20 5 6 16 6 6 6 89 41 25 28 12 130 scale 3/4 E85K7.4 7.4

curtain wall system E 85 combined facade with vertical silicone joint and horizontal cap 20 5 15 15 min 6 20 15 10 10 silicone seal silicone gasket 130 705 thermal insulation spaser 80 171/80 183 tapping screw DIN 7981 ST5.5x25-C-H glazing clip 71 130 spacer 33 879 28 6 16 6 min 6 tape 12 12 gasket 130 480 gasket 76 651 flange 76 674 89 5 5 tapping screw DIN 7981 ST4.8x19-C-H 130 3 15 10 10 15 18 20 18 3 fixing part 71 113 41 6 transom E 85304 mullion E 85104 scale 3/4 E85K7.5 7.5

curtain wall system E 85 combined facade with vertical silicone joint and horizontal cap cover cap E 85712 pressure plate E 85700 gasket 130 0 butyl seal 133 553 tapping screw DIN 7981 ST5.5x45-C-H gasket 130 463 glazing shim 71 185 15 10 5 10 56.3 15 flange 76 664 fixing part 71 113 transom E 85354 silicone flange 76 680 behind thermal insulation spacer 80 172 PVC spacer 9020 20 28 6 6 mullion E 85104 89 41 6 16 6 12 130 scale 3/4 E85K7.6 7.6

curtain wall system E 85 combined facade with vertical silicone joint and horizontal cap with parallel opening thermo-break window silicone seal glass support E 85614 gasket 130 707 gasket 130 479 33.3 55.5 20.8 silicone gasket 130 705 tapping screw DIN 7981 ST5.5x25-C-H glazing clip 71 130 20 5 15 structural seal 6 mm norton tape 6x6.4 mm min 6 spacer 33 879 7 6 28 16 6 6 16 6 6 gasket 130 176 9.2 sash E 85211 gasket 130 480 gasket 130 461 56 friction arm 900R/900L operating rod E 2308 6 gasket 130 180 38.2 frame E 85410 20 8 38.5 2 3 14 11 10 15 transom E 85304 79.2 16 21 18 41 mullion E 85104 scale 3/4 E85K7.7 7.7

curtain wall system E 85 combined facade with vertical silicone joint and horizontal cap with 3rd level transom and parallel opening thermo-break window norton tape 6x6.4 mm structural seal 6 mm gasket 130 131 gasket 130 706 33 14.4 9 45.8 gasket 130 473 38.5 8 20 36 2 gasket 130 176 sash E 85211 gasket 130 461 operating rod E 2308 self-drilling screw DIN 7981 ST4.8x32-M-Z gasket 130 180 friction arm 900R/900L frame E 85410 transom E 85304 gasket 130 473 31 3 glazing shim 71 185 gasket 130 0 gasket 130 463 thermal insulation spacer 80 172 20 6 16 6 12 89 41 scale 3/4 E85K7.8 7.8

MACHININGS MACHINING PROCESSING

curtain wall system E 85 cutting lengths L transom pressure plate cover cap not to scale E85M8.1 8.1

curtain wall system E 85 machinings of transom 2nd level drainage with T-joint and flange mullion flange T-joint 18 transom 15 gasket 76 651 tapping screw DIN 7981 ST4.8x19-C-H transom flange T-joint E 85302 76 672 71 122 E 85303 76 673 71 123 E 85304 76 674 71 124 E 85305 76 675 71 125 E 85306 76 676 71 126 E 85307 76 677 71 127 not to scale E85M8.4 8.4

curtain wall system E 85 machinings of transom 2nd level drainage with T-joint and flange mullion flange T-joint 18 transom 6 silicone flange 76 680 tapping screw DIN 7981 ST4.8x19-C-H transom flange T-joint E 85351 76 661 71 131 E 85352 76 662 71 132 E 85353 76 663 71 133 E 85354 76 664 71 134 E 85355 76 665 71 135 E 85356 76 666 71 136 E 85357 76 667 71 137 E 85358 76 668 71 138 E 85359 76 669 71 139 E 85369 76 670 71 144 not to scale E85M8.5 8.5

curtain wall system E 85 machinings of transom 2nd level drainage with transom connectors 15 7 6.5 5 15 mullion 46 8 17 20 15 flange T-joint 17 transom gasket 76 651 15 tapping screw DIN 7981 ST4.8x19-C-H transom flange T-joint E 85302 76 622 71 152 E 85303 76 623 71 153 not to scale E85M8.6 8.6

curtain wall system E 85 machinings of transom 3rd level drainage with transom connectors 6 7 6.5 mullion 46 8 17 5 15 20 15 flange T-joint 17 transom silicone flange 76 680 6 tapping screw DIN 7981 ST4.8x19-C-H transom flange T-joint E 85351 76 624 71 141 E 85352 76 625 71 142 not to scale E85M8.7 8.7

curtain wall system E 85 fixing of 3rd level transom using transom connector E 85994 at angle 90 mullion a = 0 ~ 60 butyl seal 76 681 between mullion and transom X = (D-20) + x sin(a ) cos(a ) transom connector E 85994 a tapping screw DIN 7981 ST4.8x19-C-H tapping screw DIN 7981 ST4.8x19-C-H b tapping screw DIN 7981 ST4.8x38-C-H transom 90-a transom b, mm E 85351 25 E 85352 45 E 85353 43 E 85354 63 E 85355 83 E 85356 103 E 85357 133 E 85358 153 E 85359 173 E 85369 224 not to scale E85M8.10 8.10

curtain wall system E 85 transom connector E 85994 83.15 68.55 57.2 48.0 40.3 33.6 27.7 22.4 Fixing devices have to be placed coaxially even though transoms are not parallel. Distance between fixing devices must be evaluated according to the following diagram, so that to achieve smooth transition of the external webs of every transom 17.5 12.9 8.5 4.2 0.0 5 10 15 20 25 30 35 40 45 55 60 a( ) a = 0 ~ 60 a Capability of fastening transom by screws on the frontal face of fixing device 90-a In order to achieve optimum result in terms of aesthetics, the axis of the rotated transom must always be in accordance to the diagram above,depending on the angle of rotation, so that the centre of rotation of the transom is at the intersection of the axes of rotated and non rotated transoms not to scale a E85M8.11 8.11

curtain wall system E 85 connection between transom E 85300 and supplementary transom to mullion supplementary transom E 85600 E 85601 E 85602 E 85603 flange 76 6 76 652 76 653 76 654 10 100 supplementary transom 76 6 tapping screw DIN 7982 ST4.8x19-C-H not to scale tapping screw DIN 7981 ST4.8x19-C-H E85M8.12 8.12

8.13 H 120 H 120 H 120 not to scale B 158 B 210 B 220 L 105 L 105 52 L 1 52 52 71 207 71 120 71 1 H 90 H 90 H 90 B 158 B 220 B 210 L 105 L 105 52 52 L 1 52 71 090 71 290 71 159 H 115 H 115 H 115 B 158 B 220 B 210 L 106 L 105 52 L 1 52 53 71 270 71 015 71 2 H 72 H 72 H 72 B 158 B 220 B 210 L 105 L 106 51.8 52 L 1 71 072 71 390 71 572 53 fixed support movable support H 65 H 65 H 65 B 158 B 210 B 220 L 105 L 106 52 L 1 52 71 065 53 71 265 71 565 fixing brackets curtain wall system E 85 E85M8.13

min 120 curtain wall system E 85 fixing brackets B 84 L 105 71 121 B 84 L 105 71 091 H 115 H 120 H 90 B 84 L 105 71 172 71 372 B 84 L 105 H 65 H 72 B 84 L 105 71 165 fixed support H movable support H/2 not to scale E85M8.14 8.14

curtain wall system E 85 Е Е Е Е Мх Е Е Е Е 8.15

min 120 curtain wall system E 85 fixing brackets 43.2 71 0 or E 85913 profile 43.2 nut М12 washer ø12 H 90 H 140 E 85918 profile B 220 B 210 anchor М12х123 set for bracket as a hidden support 71 213 DIN 440 nut М10 bush ø15x / 2pc. anchor M12x123 washer ø10 bolt М10x70 min 120 min 120 min 120 min 120 H/2 H note: accessories from profiles E 85913 and E 85918 can be produced and delivered with the machinings, after ordering and specifing the mullion. not to scale E85M8.18 8.18

curtain wall system E 85 condensation water drainage water drainage *upside down fill with silicone here drainage profile 74 674 max 8 m max 8 m max 8 m 30 drainage profile 74 674 not to scale pressure plate 12 E85M8.22 8.22

curtain wall system E 85 bottom finishing cut for membrane mullion mullion 27 4 transom add. profile E 85612 cut for membrane in mullion bracket 71 0 membrane concrete slab not to scale E85M8.23 8.23

curtain wall system E 85 fixing of E 85723 to E 85745 pressure plate E 85700 pressure plate E 85745 cap E 85713 cap E 85723 tapping screw DIN 7981 ST3.5x13-C-H note: all big cover caps (E 85723, E85724, E85716, E85718) have to be used with pressure plate E85745 and to be fastened with screws not to scale E85M8.30 8.30

curtain wall system E 85 structural glazing assembly mullion gasket thermal insulation spacer 80 171 glazing clip 71 130 tapping screw DIN ISO 70 ST5.5x22-C-H thermal insulation spacer 80 183 spacer 33 879 not to scale E85M8.32 8.32

curtain wall system E 85 projected window fixings and machinings E 85410 E 85210 29.5 12 20.3 5.6 9.6 19 13 40.1 10.5 19 13 40.1 10.5 scale 1:2 scale 1:2 6 54 302 54 457 6 20 4.5 54 462 54 302 54 457 not to scale 54 462 E85M8.33 8.33

curtain wall system E 85 machining of drainage opening not to scale E85M8.34 8.34

curtain wall system E 85 profiles for projected window glass support E 85615 glass support E 85614 glass support E 85614 structural glazing silicone glass support E 85615 structural glazing silicone tapping screw DIN 7982 ST3.5x13-C-H tapping screw DIN 7982 ST3.5x13-C-H not to scale E85M8.37 8.37

curtain wall system E 85 required machinings of gaskets 130 706 and 130 707 for projected window used in two sided curtain wall note: cutting of EPDM 130 706 and 130 707 has to be performed with patterns 990 522 and 130 521 not to scale E85M8.38 8.38

curtain wall system E 85 projected opening window 800R - set of nuts for 400R and 600R blind rivet nut M5-14 pcs screw M5x16-6 pcs countersunk screw M5x20-8 pcs arm for projected window code type length, mm angle of height of opening, frame, mm load, kg 400 R adjustable 405 25 0-1200 80 600 R adjustable 665 15 1201-2000 130 not to scale E85M8.39 8.39

curtain wall system E 85

ACCESSORIES IMAGES DESCRIPTIONS

ET071207 1 MF ET071090 1 MF ET071120 1 MF ET071290 1 MF

DIN440 MF 07M12123S 1 MF DIN 7981 100 MF DIN 7982 100 MF

ET071209 MF ET074674 ET074657 ET076651

ET076680 200 ET076681 6 m ET071113 100 MF ET076671 800-85 301

ET076672 600-85 302 ET076673 600-85 303 ET076674 400-85 304 ET076675 3-85 305

ET076676 440-85 306 ET076677 400-85 307 ET076660 100-85 360 ET076661 100-85 351

ET076662 100-85 352 ET076663 100 ET076664 100-85 353 ET076665 100-85 354-85 355

ET076666 100 ET076667 100-85 356-85 357 ET076668 100-85 358 ET076669 100-85 359

ET076670 100-85 369 ET076622 200 ET076623 200-85 302-85 303 ET076624 200-85 351

ET076625 200 ET071122 300 MF -85 352 ET071123 3 MF -85302 ET071124 280 MF -85303-85304

ET071125 200 MF -85305 ET071126 170 MF ET071127 140 MF -85306-85307 ET071131 320 MF -85351

ET071132 300 MF -85352 ET071133 280 MF -85353 ET071134 210 MF ET071135 180 MF -85354-85355

ET071136 156 MF -85356 ET071137 110 MF -85357 ET071138 100 MF -85358 ET071139 96 MF -85359

ET071144 MF -85369 ET71140 100 MF ET71143 80 MF ET071152 2 MF -85302

ET071153 1 MF -85303 ET071141 300 MF -85351 ET071142 1 MF -85352

ET053302 2 MF die custd aluminium -85410 ET054457 180 MF -85410 ET054459 200 MF -85200 ET054458 2 MF -85400

ET054461 100 MF -85210-85211 ET054462 300 MF -85210-85211

ET130473 80 ET130474 100 ET130462 100 ET130455 100

ET130181 200 ET130463 80 ET130457 110 ET130458 100

ET130167 120 ET130479 100 ET130470 100 ET130182 100

ET130480 100 ET1300 140 ET130553 160 ET130551 160

ET130126 110 pressure plate 85702 ET130705 120 ET130180 3 ET130199 100

ET130198 200 ET130461 110 ET130706 45 ET130707 110

ET080183 100 /pcs ET080171 6 ET080174 6

ET080172 6 ET080173 6 ET080177 6 ET080184 6

ET162 058 1 ET990 520 1 ET990 523 1

GI2236 10 MF GI04041 20 GI4020 10 BE400R 10 MF 80 kg for 85

BE600R 10 MF 130 kg for 85 BE900R 10 MF for 85 BE700R 100 MF BE800R 100 MF

pening angle BE800R

BE900R

CE MARKING ALUMINIUM AS MATERIAL STANDARDS REQUIREMENTS

curtain wall system E85 when tested in accordance with EN 13830,

curtain wall system E85 Building Systems is not responsible for any ty