New TANDEM plus BLUMOTION

TANDEM plus BLUMOTION New TANDEM plus BLUMOTION Premium concealed runners for wood drawers blum.com

The next generation of TANDEM plus BLUMOTION

The right solution for every drawer The new TANDEM plus BLUMOTION brings together all of the features, innovations and benefits that Blum has developed since first manufacturing drawer runners in the early 1960s. The first time you open and close a fully loaded drawer, you will quickly realize that TANDEM plus BLUMOTION is a runner system that is unmatched in quality, style and running action. Contents 6 TANDEM plus BLUMOTION overview 7 Testing standards 8 General specifications 10 Using TANDEM plus BLUMOTION 12 Standard applications 22 Inset drawer 24 Narrow drawer 26 Roll-out shelf 27 Bottom mount drawer 28 SPACE CORNER 30 Locking devices 32 Rear attachment options 34 Waste/recycle drawer 36 Bottom mount drawer - heavy duty 38 TIP-ON for TANDEM plus 40 Accessories 42 Assembly aids 45 Part number index

TANDEM plus BLUMOTION

TANDEM plus BLUMOTION Made in the USA Blum's newest generation of TANDEM plus BLUMOTION concealed drawer runners offers four-dimensional adjustment, elongated holes for depth adjustment, bottom mount holes and exceptional load capacity. With TANDEM plus BLUMOTION concealed runners, the customer only sees the beauty of the wood drawers while experiencing the quality of motion and soft closing they have come to expect from Blum products. TANDEM plus BLUMOTION concealed runners are made in the USA at our North Carolina facility. This is just one example of Blum s commitment to manufacturing in the US, for the US. TANDEM plus BLUMOTION is mounted discreetly beneath the drawer and has the quietest opening and closing action available. This top-of-the-line concealed runner is the industry choice for dovetail drawers in high-end cabinetry, in either face frame or panel.

TANDEM plus BLUMOTION overview Drawer length Full extension Max. drawer thickness Heavy duty full extension Max. drawer thickness 5/8" 3/4" 5/8" 3/4" 9" 12" 563H series 15" 563F series 18" 563H and 21" 563. series 569H series 569F series 24" 27" 30" 569. series 569A series Capacity dynamic/static 90/100 lb* 135/150 lb* * Per ANSI/BHMA 156.9 Grade 1 standards on a 21" length drawer box. Drawer components Rear mounting brackets (face frame 563 only) Locking devices Runners NOTE: Rear mounting brackets used for frame applications Standard lengths 12" 15" 18" 21" 24" 27" 30" 33" 9" 12" 15" 18" 21" 24" 27" 30" TANDEM series runners are based on the American standard 3" cabinet depth system, therefore, the runner lengths come in 3" increments. TANDEM plus runners are available for drawers from 9" 30" in length. 6 2012 Blum, Inc. Subject to technical modifications without notice.

Testing standards i ISO 9001 Blum, Inc. is ISO 9001 certified which means that you are assured of consistent quality in every Blum product. ANSI/BHMA All Blum runners meet or exceed ANSI/BHMA 156.9 grade 1 requirements. Contact your local Blum representative for more details. > General information All Blum hardware undergoes strict quality control procedures through all stages of production. Blum hardware is designed for cabinets and cabinet components made from wood, melamine or MDF. Careful attention must be paid to installation and operating instructions when using Blum hardware (see catalogs and instruction sheets for all technical information). The manufacturer must decide on the screws or attachment methods to suit the material being used (i.e. wood, melamine, etc.). The hardware must not be exposed to acidic or corrosive materials (i.e. some household cleaning solutions). To ensure that Blum hardware functions correctly, it must be kept clean and undamaged. For any additional information please contact your Blum representative. Anyone selling Blum hardware must ensure that their customer is aware of any relevant information given in this catalog. Conditions of sale and delivery All deliveries and services are based on the general conditions of sale which are available upon request. The technical presentations and dimensions in illustrations are non-binding. We reserve the right to make changes to specifications at any time. We do not accept any responsibility for any errors which may occur in the production of this catalog. Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 7

General specifications Complete runner system Full extension concealed runners with BLUMOTION soft close Zinc-coated steel Concealed roller carriage with permanently lubricated synthetic rollers Available in standard and heavy duty H and. series for drawers up to 5/8" side material thickness F and A series for drawers up to 3/4" side material thickness Elongated holes for depth adjustment Bottom mount holes on 15", 18" and 21" standard duty Tool-free tilt adjustment Tool-free rear side-to-side adjustment Locking devices Stamped steel or zinc die-cast base with synthetic, spring-loaded release levers Captive right device, self-aligning left device Self-adjusting drawer length tolerance Tool-free height adjustment Tool-free front side-to-side adjustment Available with depth adjustment Available for narrow drawers Drawer components NOTE: For 563. and 569 series, rear brackets and sockets cannot be used. Cabinet sides must be blocked-out flush with the inside of the face frame. Locking devices NOTE: Rear mounting brackets used for frame applications only Rear mounting brackets (face frame 563 H/F only) Runners Rear mounting options Zinc-coated steel brackets or nylon sockets Depth and lateral self-alignment One runner for all applications TANDEM runners are designed for the American 3" increment cabinet depth system. This feature permits overlay or inset applications to use the same runner. Full length runners make installation in panel or face frame cabinets possible. Load capacities 90 lb dynamic, 100 lb static TANDEM plus BLUMOTION 563 series 135 lb dynamic, 150 lb static for TANDEM plus BLUMOTION 569 series Locking devices Locking devices allow easy insertion and removal of drawers. page 30 TANDEM template A required assembly aid for the boring of TANDEM locking devices and rear hooks. Rear mounting options For use when installing TANDEM runners in face frame cabinets. Not necessary for panel cabinet installation. page 32 page 42 8 2012 Blum, Inc. Subject to technical modifications without notice.

i New side adjustment New rear side adjustment 1. Rotate side adjustment left or right equally on both locking devices. Drawer front moves in the same direction as rotation. T51.1901.xx with locking device drawer front R R L 2. After front side adjustment is made with the locking devices, rotate the rear side adjustment left or right to re-align the back of the drawer box with the front. Drawer back moves in the same direction as rotation. L R Maximum 1.5 (1/16") to left or right (tool-free) NOTE: Side adjustment not available on T51.x8xx locking devices L Maximum 1.5 (1/16") to left or right (tool-free) Height adjustment Tilt adjustment 1. Press up on adjustment tab 2. Push towards back of drawer Rotate the tilt adjustment lever on the rear of each runner to tilt the top of the drawer front forward. 2 1 Maximum 3 (1/8") rise of drawer front (tool-free) NOTE: Height adjustment available on all TANDEM locking devices Maximum 5 (3/16") rise of drawer back (tool-free) New depth adjustment on runner TANDEM 563 and 569 runners feature elongated holes that allow ± 4.5 (3/16") depth adjustment. New depth adjustable locking device Locking device T51.1901.PS with side, height and depth adjustment Turning the adjustment screw allows for up to 2.5 (3/32") out adjustment. page 30 New profile setback New bottom mounting option Side view Top view 32 (1-1/4") 37 (1-15/32") 9 (11/32") X 9 (11/32") 67 (2-5/8") 23.5 (15/16") 10 (13/32") Z Y 37 (1-15/32") 3 (1/8") setback 3 (1/8") NOTE: Hole locations to the face of the cabinet stay the same. For inset applications see page 22. Available on 15", 18" and 21" 563H and 563F and all 563. runners. page 27 Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 9

Using TANDEM plus BLUMOTION i Step 1 Measure cabinet opening Cabinet opening measurements are needed to determine drawer box size. Panel cabinet depth Frame cabinet Depth ht. Ht. width Width Step 2 Select TANDEM runners Based on the application, choose the TANDEM runner that fits the desired extension, drawer side thickness, load capacity and cabinet depth. Then go to the corresponding catalog page for more specific information. Full extension Heavy duty full extension Drawer length Max. drawer thickness Max. drawer thickness 5/8" 3/4" 5/8" 3/4" 9" 12" 563H series 15" 563F series 18" 563H and 569H series 569F series 563. series 21" 24" 27" 569. series 569A series 30" Capacity dynamic/static 90/100 lb* 135/150 lb* Step 3 Preparing drawer boxes Build drawers according to the specifications given for the TANDEM runners you chose and the measurements determined in Step 1. Install appropriate locking devices and bore holes to accept rear hooks. Step 4 Attach runners to cabinet Using the mounting information given for the TANDEM runners you chose, mount the TANDEM runners in the cabinet. Step 5 Insert drawers Extend the drawer runners fully. Place the drawer on the runners and close. The locking devices automatically engage with the runners. Make adjustments if necessary. 10 2012 Blum, Inc. Subject to technical modifications without notice.

Drawer preparation i Rear notching Dimensions Rear view Option no notching 13 (1/2") 35 (1-3/8") min. Drawers must be notched in the back to accommodate TANDEM runners. The notches must be flush with the drawer sides and bottom. NOTE: TIP-ON for TANDEM plus requires 86 (3-3/8") notch page 38 Make the back panel shorter and extend the drawer bottom to the back of the drawer. Rear boring Dimensions Rear view 7 (9/32") Ø6 x 1 0 bo r e f or hook 11 (7/16") 13 (1/2") Drawers require 6 mm holes bored on each side in the back panel to accept the hooks in the back of TANDEM runners. Boring TANDEM boring template 6 mm bit with stop collar page 42 NOTE: Using the T65.1600 template is highly recommended 1 Place the template over the drawer side 2 Position the template so that the center rib rests against the inside face of the drawer side 3 Set stop collar on 6 mm bit so that it will bore 10 (13/32") deep 4 Hold template firmly and bore hole 5 Repeat on other side Locking devices Installation 2.5 mm bit with extension chuck TANDEM boring template page 42 Screws Locking device 1 Position the 2.5 mm drill bit into the extension chuck so that it will bore 10 (13/32") deep 2 Place template into the front corner of the drawer 3 Bore two holes and repeat on other side 4 Attach locking devices with #6 x 5/8" deep thread wood screws (606N or 606P) NOTE: The mounting screws must go in at a precise angle and the locking device must fit flush to the drawer bottom to ensure proper function of the complete drawer system NOTE: Using the T65.1600 template is highly recommended Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 11

TANDEM plus BLUMOTION 563. Application New features Four-dimensional adjustment Elongated holes for depth adjustment Bottom mount holes 100 lb static load capacity Basic components Description Full extension concealed drawer runners Panel or blocked-out face frame cabinets BLUMOTION soft closing TANDEM smooth running action Available in 18" and 21" lengths 13 (1/2") to 16 (5/8") drawer thickness Made in the U.S.A. Locking device Runner Other applications Inset drawer pg 22 Narrow drawer pg 24 Roll-out shelf pg 26 Bottom mount pg 27 Components Runner set One set required per drawer BLUMOTION inside For overall cabinet depth Drawer length TANDEM plus BLUMOTION 610 (24") 533 (21") 563.5330B 533 (21") 457 (18") 563.4570B Wood screw for installation System screw for installation 662.1150.HG Side adjustable locking device One right and one left required per drawer With side-to-side adjustment Captive right and self-aligning left device Self-adjusting drawer length tolerance Steel base with synthetic, spring-loaded release levers Minimum inside drawer width 170 (6-11/16") Height adjustment +3 (1/8") Side adjustment ±1.5 (1/16") For use with 563/569 series runners only For other options see page 30 NOTE: For 563. series runners rear brackets and sockets cannot be used. Cabinet sides must be blocked-out flush with the inside of the frame. See page 13. Right locking device T51.1901 R Installation Left locking device T51.1901 L page 11 Installation screw Using TANDEM page 10 Drawer preparation page 11 Accessories page 40 Assembly aids page 42 12 2012 Blum, Inc. Subject to technical modifications without notice.

Maximum drawer thickness 16 (5/8") Lengths available 18" - 21" Static load capacity 100 lb Drawer and cabinet specifications Drawer box specifications Drawer back preparation Front view Rear view opening width 6 (1/4") minimum top clearance 7 (9/32") Ø6 x 1 0 bo r e f or hook opening width minus 42 screws or 662.1150.HG 37 (1-15/32") 21 (13/16") drawer side thickness maximum 16 (5/8") maximum drawer height = opening minus 20 (13/16") opening height 1 (7/ 16") 13 (1/2") 35 (1-3/8") minimum rear notch Runner comparison Side view 563. 13 (1/2") bottom recess 14 (9/16") bottom clearance NOTE: Material thickness may vary. Inside drawer width must equal opening width minus 42 for TANDEM to align and run properly. Calculating outside drawer width For drawer side thickness 16 (5/8") 15 (19/32") 14 (9/16") 13 (1/2") 12 (15/32") Deduct from inside cabinet width 10 (13/32") 12 (15/32") 14 (9/16") 16 (5/8") 18 (23/32") Example: For 21" opening width and a 5/8" thick drawer, 21" minus 13/32" = 20-19/32" drawer width 563H NOTE: Same hole pattern as the 563H Runner mounting specifications Side view Runner close-up 32 (1-1/4") blocking for frame applications A 37 (1-15/32") 32 (1-1/4") 10 (13/32") 34 (1-11/32") 7 (9/32") 9 (11/32") typ. 20.5 (13/16") runner length 3 (1/8") setback 25 (31/32") 37 (1-15/32") inside cabinet depth NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings. NOTE: Elongated holes are for ±4.5 (3/16") depth adjustment only. Additional screws must be used to secure the runner to the cabinet. TANDEM plus minimum inside screw location drawer length runner length BLUMOTION cabinet depth A 563.5330B 533 (21") 557 (21-15/16") 548 (21-9/16") 261 (10-9/32") 563.4570B 457 (18") 480 (18-29/32") 471 (18-17/32") 261 (10-9/32") Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 13

TANDEM plus BLUMOTION 563H Application New features Four-dimensional adjustment Elongated holes for depth adjustment Bottom mount holes on 15", 18" and 21" 100 lb static load capacity Description Basic components Rear bracket (face frame only) Full extension concealed drawer runners Face frame or panel cabinets BLUMOTION soft closing TANDEM smooth running action Available in 9" to 21" lengths 13 (1/2") to 16 (5/8") drawer thickness Made in the U.S.A. Locking device Runner Other applications Inset drawer pg 22 Narrow drawer pg 24 Roll-out shelf pg 26 Bottom mount pg 27 Components Runner set One set required per drawer BLUMOTION inside For overall cabinet depth Drawer length TANDEM plus BLUMOTION 610 (24") 533 (21") 563H5330B 533 (21") 457 (18") 563H4570B 457 (18") 381 (15") 563H3810B 381 (15") 305 (12") 563H3050B 305 (12") 229 (9") 563H2290B10 Wood screw for installation System screw for installation 662.1150.HG Side adjustable locking device One right and one left required per drawer With side-to-side adjustment Captive right and self-aligning left device Self-adjusting drawer length tolerance Steel base with synthetic, spring-loaded release levers Minimum inside drawer width 170 (6-11/16") Height adjustment +3 (1/8") Side adjustment ±1.5 (1/16") For use with 563/569 series runners only For other options see page 30 Right locking device T51.1901 R Installation Left locking device T51.1901 L page 11 Installation screw Rear mounting bracket for frame cabinets For use when installing TANDEM runners in face frame cabinets. Not necessary for panel cabinet installation. Two required per drawer Depth and lateral self-alignment Zinc-coated steel For 9" TANDEM rear attachment options see page 32 Non-handed bracket 295.3750.01 Installation screw Using TANDEM page 10 Drawer preparation page 11 Accessories page 40 Assembly aids page 42 14 2012 Blum, Inc. Subject to technical modifications without notice.

Maximum drawer thickness 16 (5/8") Lengths available 9" - 21" Static load capacity 100 lb Drawer and cabinet specifications Drawer box specifications Drawer back preparation Front view Rear view opening width 6 (1/4") minimum top clearance 7 (9/32") Ø6 x 1 0 bo r e f or hook opening width minus 42 screws or 662.1150.HG 37 (1-15/32") 21 (13/16") drawer side thickness maximum 16 (5/8") maximum drawer height = opening minus 20 (13/16") opening height Rear mounting bracket Front view 1 1 (7/ 1 6") 35 (1-3/8") minimum rear notch 21 (13/16") 13 (1/2") 13 (1/2") bottom recess 14 (9/16") bottom clearance NOTE: Material thickness may vary. Inside drawer width must equal opening width minus 42 for TANDEM to align and run properly. Calculating outside drawer width For drawer side thickness 16 (5/8") 15 (19/32") 14 (9/16") 13 (1/2") 12 (15/32") Deduct from inside cabinet width 10 (13/32") 12 (15/32") 14 (9/16") 16 (5/8") 18 (23/32") Example: For 21" opening width and a 5/8" thick drawer, 21" minus 13/32" = 20-19/32" drawer width 16 32 (5/8") (1-1/4") 2 (3/32") 14 (9/16") face frame rail 12 (15/32") NOTE: For frame applications, use a minimum of three screws per bracket face frame stile Runner mounting specifications Side view Runner close-up rear mounting bracket 295.3750.01 B A 37 (1-15/32") 32 (1-1/4") 34 (1-11/32") 7 (9/32") 9 (11/32") typ. 9 (11/32") 32 (1-1/4") 10 (13/32") panel and face frame 20.5 (13/16") 3 (1/8") setback face frame only 25 (31/32") runner length 37 (1-15/32") inside cabinet depth NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings. NOTE: Elongated holes are for ±4.5 (3/16") depth adjustment only. Additional screws must be used to secure the runner to the cabinet. TANDEM plus drawer inside cabinet depth with rear attachment screw locations for panel cabinets runner length BLUMOTION length maximum minimum A B 563H5330B 533 (21") 599 (23-19/32") 557 (21-15/16") 548 (21-9/16") 261 (10-9/32") 517 (20-11/32") 563H4570B 457 (18") 522 (20-9/16") 480 (18-29/32") 471 (18-17/32") 261 (10-9/32") 453 (17-27/32") 563H3810B 381 (15") 446 (17-9/16") 404 (15-29/32") 395 (15-9/16") 165 (6-1/2") 357 (14-1/16") 563H3050B 305 (12") 370 (14-9/16") 328 (12-29/32") 319 (12-9/16") 165 (6-1/2") 261 (10-9/32") 563H2290B10 229 (9") 299 (11-25/32") 266 (10-15/32") 259 (10-3/16") 133 (5-1/4") 229 (9") Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 15

TANDEM plus BLUMOTION 563F Application New features Four-dimensional adjustment Elongated holes for depth adjustment Bottom mount holes on 15", 18" and 21" 100 lb static load capacity Description Basic components Rear bracket (face frame only) Other applications Full extension concealed drawer runners Face frame or panel cabinets BLUMOTION soft closing TANDEM smooth running action Available in 9" to 21" lengths 16 (5/8") to 19 (3/4") drawer thickness Made in the U.S.A. Available spring 2013 Locking device Runner Inset drawer pg 22 Narrow drawer pg 24 Roll-out shelf pg 26 Bottom mount pg 27 Components Runner set One set required per drawer BLUMOTION inside For overall cabinet depth Drawer length TANDEM plus BLUMOTION 610 (24") 533 (21") 563F5330B 533 (21") 457 (18") 563F4570B 457 (18") 381 (15") 563F3810B 381 (15") 305 (12") 563F3050B 305 (12") 229 (9") 563F2290B10 Wood screw for installation System screw for installation 662.1150.HG Side adjustable locking device One right and one left required per drawer With side-to-side adjustment Captive right and self-aligning left device Self-adjusting drawer length tolerance Steel base with synthetic, spring-loaded release levers Minimum inside drawer width 170 (6-11/16") Height adjustment +3 (1/8") Side adjustment ±1.5 (1/16") For use with 563/569 series runners only For other options see page 30 Right locking device T51.1901 R Installation Left locking device T51.1901 L page 11 Installation screw Rear mounting bracket for frame cabinets For use when installing TANDEM runners in face frame cabinets. Not necessary for panel cabinet installation. Two required per drawer Depth and lateral self-alignment Zinc-coated steel For 9" TANDEM rear attachment options see page 32 Non-handed bracket 295.3750.01 Installation screw Using TANDEM page 10 Drawer preparation page 11 Accessories page 40 Assembly aids page 42 16 2012 Blum, Inc. Subject to technical modifications without notice.

Maximum drawer thickness 19 (3/4") Lengths available 9" - 21" Static load capacity 100 lb Drawer and cabinet specifications Drawer box specifications Drawer back preparation Front view Rear view opening width 6 (1/4") minimum top clearance 7 (9/32") Ø6 x 1 0 bo r e f or hook opening width minus 49 1 1 (7/ 1 6") screws or 662.1150.HG 37 (1-15/32") 24.5 (31/32") drawer side thickness maximum 19 (3/4") maximum drawer height = opening minus 20 (13/16") opening height Rear mounting bracket Front view 35 (1-3/8") minimum rear notch 21 (13/16") 13 (1/2") 13 (1/2") bottom recess 14 (9/16") bottom clearance NOTE: Material thickness may vary. Inside drawer width must equal opening width minus 49 for TANDEM to align and run properly. Calculating outside drawer width For drawer side thickness 19 (3/4") 18 (23/32") 17 (21/32") 16 (5/8") 15 (19/32") Deduct from inside cabinet width 11 (7/16") 13 (1/2") 15 (19/32") 17 (21/32") 19 (3/4") Example: For 21" opening width and a 3/4" thick drawer, 21" minus 7/16" = 20-9/16" drawer width 16 32 (5/8") (1-1/4") 2 (3/32") 14 (9/16") face frame rail 12 (15/32") NOTE: For frame applications, use a minimum of three screws per bracket face frame stile Runner mounting specifications Side view Runner close-up rear mounting bracket 295.3750.01 B A 32 (1-1/4") 34 (1-11/32") 7 (9/32") 37 (1-15/32") 9 (11/32") typ. 9 (11/32") 32 (1-1/4") 10 (13/32") panel and face frame 20.5 (13/16") runner length 3 (1/8") setback face frame only 25 (31/32") 37 (1-15/32") inside cabinet depth NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings. NOTE: Elongated holes are for ±4.5 (3/16") depth adjustment only. Additional screws must be used to secure the runner to the cabinet. TANDEM plus drawer inside cabinet depth with rear attachment screw locations for panel cabinets runner length BLUMOTION length maximum minimum A B 563F5330B 533 (21") 599 (23-19/32") 557 (21-15/16") 548 (21-9/16") 261 (10-9/32") 517 (20-11/32") 563F4570B 457 (18") 522 (20-9/16") 480 (18-29/32") 471 (18-17/32") 261 (10-9/32") 453 (17-27/32") 563F3810B 381 (15") 446 (17-9/16") 404 (15-29/32") 395 (15-9/16") 165 (6-1/2") 357 (14-1/16") 563F3050B 305 (12") 370 (14-9/16") 328 (12-29/32") 319 (12-9/16") 165 (6-1/2") 261 (10-9/32") 563F2290B10 229 (9") 299 (11-25/32") 266 (10-15/32") 259 (10-3/16") 133 (5-1/4") 229 (9") Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 17

TANDEM plus BLUMOTION 569H/569. heavy duty Application New features Four-dimensional adjustment Elongated holes for depth adjustment 150 lb static load capacity Basic components Description Full extension concealed drawer runners Panel or blocked-out face frame cabinets BLUMOTION soft closing TANDEM smooth running action Available in 18" to 30" lengths 13 (1/2") to 16 (5/8") drawer thickness Locking device Runner Other applications Inset drawer pg 22 SPACE CORNER pg 28 Components Runner set One set required per drawer BLUMOTION inside For overall cabinet depth Drawer length TANDEM plus BLUMOTION 838 (33") 762 (30") 569.7620B 762 (30") 686 (27") 569.6860B 686 (27") 610 (24") 569.6100B 610 (24") 533 (21") 569H5330B 533 (21") 457 (18") 569H4570B Wood screw for installation System screw for installation 662.1150.HG Side adjustable locking device One right and one left required per drawer With side-to-side adjustment Captive right and self-aligning left device Self-adjusting drawer length tolerance Steel base with synthetic, spring-loaded release levers Minimum inside drawer width 170 (6-11/16") Height adjustment +3 (1/8") Side adjustment ±1.5 (1/16") For use with 563/569 series runners only For other options see page 30 NOTE: For heavy duty applications, rear brackets and sockets cannot be used. Cabinet sides must be blocked-out flush with the inside of the frame. See page 19. Right locking device T51.1901 R Installation Left locking device T51.1901 L page 11 Installation screw Using TANDEM page 10 Drawer preparation page 11 Accessories page 40 Assembly aids page 42 18 2012 Blum, Inc. Subject to technical modifications without notice.

Maximum drawer thickness 16 (5/8") Lengths available 18" - 30" Static load capacity 150 lb Drawer and cabinet specifications Drawer box specifications Drawer back preparation Front view Rear view opening width 6 (1/4") minimum top clearance 7 (9/32") Ø6 x 1 0 bo r e f or hook opening width minus 42 screws or 662.1150.HG 37 (1-15/32") 21 (13/16") drawer side thickness maximum 16 (5/8") maximum drawer height = opening minus 20 (13/16") opening height 1 (7/ 16") 13 (1/2") 35 (1-3/8") minimum rear notch Runner comparison Side view 569H 13 (1/2") bottom recess 14 (9/16") bottom clearance NOTE: Material thickness may vary. Inside drawer width must equal opening width minus 42 for TANDEM to align and run properly. 569. Calculating outside drawer width For drawer side thickness 16 (5/8") 15 (19/32") 14 (9/16") 13 (1/2") 12 (15/32") Deduct from inside cabinet width 10 (13/32") 12 (15/32") 14 (9/16") 16 (5/8") 18 (23/32") Example: For 21" opening width and a 5/8" thick drawer, 21" minus 13/32" = 20-19/32" drawer width Runner mounting specifications Side view Runner close-up B 32 (1-1/4") blocking for frame applications A 37 (1-15/32") 32 (1-1/4") 10 (13/32") 34 (1-11/32") 7 (9/32") 9 (11/32") typ. 20.5 (13/16") runner length inside cabinet depth 3 (1/8") setback NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings. 25 (31/32") 37 (1-15/32") NOTE: Elongated holes are for ±4.5 (3/16") depth adjustment only. Additional screws must be used to secure the runner to the cabinet. TANDEM plus minimum inside screw locations drawer length runner length BLUMOTION cabinet depth A B 569.7620B 762 (30") 786 (30-15/16") 777 (30-19/32") 261 (10-9/32") 389 (15-5/16") 569.6860B 686 (27") 709 (27-29/32") 700 (27-9/16") 261 (10-9/32") 389 (15-5/16") 569.6100B 610 (24") 634 (24-31/32") 625 (24-19/32") 261 (10-9/32") 389 (15-5/16") 569H5330B 533 (21") 557 (21-15/16") 548 (21-9/16") 261 (10-9/32") 517 (20-11/32") 569H4570B 457 (18") 480 (18-29/32") 471 (18-17/32") 261 (10-9/32") 453 (17-27/32") Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 19

TANDEM plus BLUMOTION 569F/569A heavy duty Application New features Four-dimensional adjustment Elongated holes for depth adjustment 150 lb static load capacity Basic components Description Full extension concealed drawer runners Panel or blocked-out face frame cabinets BLUMOTION soft closing TANDEM smooth running action Available in 18" to 30" lengths 16 (5/8") to 19 (3/4") drawer thickness Available spring 2013 Locking device Runner Other applications Inset drawer pg 22 SPACE CORNER pg 28 Components Runner set One set required per drawer BLUMOTION inside For overall cabinet depth Drawer length TANDEM plus BLUMOTION 838 (33") 762 (30") 569A7620B 762 (30") 686 (27") 569A6860B 686 (27") 610 (24") 569A6100B 610 (24") 533 (21") 569F5330B 533 (21") 457 (18") 569F4570B Wood screw for installation System screw for installation 662.1150.HG Side adjustable locking device One right and one left required per drawer With side-to-side adjustment Captive right and self-aligning left device Self-adjusting drawer length tolerance Steel base with synthetic, spring-loaded release levers Minimum inside drawer width 170 (6-11/16") Height adjustment +3 (1/8") Side adjustment ±1.5 (1/16") For use with 563/569 series runners only For other options see page 30 NOTE: For heavy duty applications, rear brackets and sockets cannot be used. Cabinet sides must be blocked-out flush with the inside of the frame. See page 21. Right locking device T51.1901 R Installation Left locking device T51.1901 L page 11 Installation screw Using TANDEM page 10 Drawer preparation page 11 Accessories page 40 Assembly aids page 42 20 2012 Blum, Inc. Subject to technical modifications without notice.

Maximum drawer thickness 19 (3/4") Lengths available 18" - 30" Static load capacity 150 lb Drawer and cabinet specifications Drawer box specifications Drawer back preparation Front view Rear view opening width 6 (1/4") minimum top clearance 7 (9/32") Ø6 x 1 0 bo r e f or hook opening width minus 49 1 1 (7/ 1 6") screws or 662.1150.HG 37 (1-15/32") 24.5 (31/32") drawer side thickness maximum 19 (3/4") maximum drawer height = opening minus 20 (13/16") opening height 13 (1/2") 35 (1-3/8") minimum rear notch Runner comparison Side view 569F 13 (1/2") bottom recess 14 (9/16") bottom clearance NOTE: Material thickness may vary. Inside drawer width must equal opening width minus 49 for TANDEM to align and run properly. 569A Calculating outside drawer width For drawer side thickness 19 (3/4") 18 (23/32") 17 (21/32") 16 (5/8") 15 (19/32") Deduct from inside cabinet width 11 (7/16") 13 (1/2") 15 (19/32") 17 (21/32") 19 (3/4") Example: For 21" opening width and a 3/4" thick drawer, 21" minus 7/16" = 20-9/16" drawer width Runner mounting specifications Side view Runner close-up B 32 (1-1/4") blocking for frame applications A 37 (1-15/32") 32 (1-1/4") 10 (13/32") 34 (1-11/32") 7 (9/32") 9 (11/32") typ. 20.5 (13/16") 3 (1/8") setback runner length inside cabinet depth NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings. 25 (31/32") 37 (1-15/32") NOTE: Elongated holes are for ±4.5 (3/16") depth adjustment only. Additional screws must be used to secure the runner to the cabinet. TANDEM plus minimum inside screw locations drawer length runner length BLUMOTION cabinet depth A B 569A7620B 762 (30") 786 (30-15/16") 777 (30-19/32") 261 (10-9/32") 389 (15-5/16") 569A6860B 686 (27") 709 (27-29/32") 700 (27-9/16") 261 (10-9/32") 389 (15-5/16") 569A6100B 610 (24") 634 (24-31/32") 625 (24-19/32") 261 (10-9/32") 389 (15-5/16") 569F5330B 533 (21") 557 (21-15/16") 548 (21-9/16") 261 (10-9/32") 517 (20-11/32") 569F4570B 457 (18") 480 (18-29/32") 471 (18-17/32") 261 (10-9/32") 453 (17-27/32") Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 21

Inset drawer Application Description Uses the same 563 or 569 series runner Requires increased setback of the runner Frame applications require blocking-out behind the face frame Basic components Rear mounting bracket for face frame only Locking device Runner Components Depth adjustable locking device One right and one left required per drawer Minimum inside drawer width 170 (6-11/16") Height adjustment +3 (1/8") Side adjustment ±1.5 (1/16") Depth adjustment +2.5 (3/32"), preset at 0 Minimum sub front thickness 13 (1/2") Designed for 13 (1/2") drawer bottom recess Integrated 3 (1/8") distance bumper For use with 563/569 series runners only For other options see page 30 Right locking device T51.1901.PS R Installation Left locking device T51.1901.PS L page 11 Installation screw Rear mounting bracket for frame cabinets For use when installing TANDEM runners in face frame cabinets. Not necessary for panel cabinet installation. Two required per drawer Depth and lateral self-alignment Zinc-coated steel For 9" TANDEM rear attachment options see page 32 Non-handed bracket 295.3750.01 Installation screw Optional inset spacer for SERVO-DRIVE For applications where there would not be enough space behind the drawer box to add SERVO-DRIVE due to cabinet construction, plumbing, etc. Two required per drawer Drawer box is built 25.4 (1") shorter in length than TANDEM specifications These spacers make up the difference between the drawer box and rear hook and provide additional space for installing SERVO-DRIVE SERVO-DRIVE boring locations and minimum inside cabinet depths move towards the cabinet face by 25.4 (1") 25.4 (1") Inset spacer Installation screw T59.A5P0S Using TANDEM page 10 Drawer preparation page 11 Accessories page 40 Assembly aids page 42 22 2012 Blum, Inc. Subject to technical modifications without notice.

Specifications Partial block-out Side view runner setback see table on the bottom of page Trial recommended blocking behind frame Complete block-out Side view runner setback see table on the bottom of page Trial recommended blocking behind frame inside cabinet depth range minimum = runner length + setback + 6 (1/4") maximum with bracket = runner length + setback + 48 (1-15/16") NOTE: Only for 563 H and F series runners inside cabinet depth minimum = runner length + setback + 6 (1/4") NOTE: Required for 563. and 569 series runners Installation Runner setback when using depth adjustable locking device (T51.1901.PS) 563/569 H/. runner setback 563/569 F/A runner setback sub front thickness 13 (1/2") 19 (3/4") 22 (7/8") 25 (31/32") 13 (1/2") 16 (5/8") 19 (3/4") 22 (7/8") 16 (5/8") 22 (7/8") 25 (31/32") 28 (1-3/32") 16 (5/8") 19 (3/4") 22 (7/8") 25 (31/32") 19 (3/4") 25 (31/32") 28 (1-3/32") 31 (1-7/32") 19 (3/4") 22 (7/8") 25 (31/32") 28 (1-3/32") 16 (5/8") 19 (3/4") 22 (7/8") 16 (5/8") 19 (3/4") 22 (7/8") calculating runner setback drawer front thickness sub front thickness drawer front thickness 563/569 H/. sub front thickness + drawer front thickness minus 10 (13/32") 563/569 F/A sub front thickness + drawer front thickness minus 13 (1/2") Runner setback when using all other locking devices 563/569 H/. runner setback 563/569 F/A runner setback sub front thickness 13 (1/2") 17.5 (11/16") 20.5 (13/16") 23.5 (15/16") 13 (1/2") 14.5 (9/16") 17.5 (11/16") 20.5 (13/16") 16 (5/8") 20.5 (13/16") 23.5 (15/16") 26.5 (1-1/32") 16 (5/8") 17.5 (11/16") 20.5 (13/16") 23.5 (15/16") 19 (3/4") 23.5 (15/16") 26.5 (1-1/32") 29.5 (1-5/32") 19 (3/4") 20.5 (13/16") 23.5 (15/16") 26.5 (1-1/32") 16 (5/8") 19 (3/4") 22 (7/8") 16 (5/8") 19 (3/4") 22 (7/8") calculating runner setback drawer front thickness sub front thickness drawer front thickness 563/569 H/. sub front thickness + drawer front thickness minus 11.5 (7/16") 563/569 F/A sub front thickness + drawer front thickness minus 14.5 (9/16") Setback information Side view runner setback drawer sub front drawer front NOTE: runner cannot be mounted below opening Setbacks shown are for drawer fronts that are flush with the face frame For recessed drawer fronts or to allow for adjustability, the setback must be increased After installation, adjust the locking device until the drawer front is in the desired position, 2.5 (3/32") out adjustment only mounting hole position NOTE: For mounting hole position add 7 (9/32") to runner setback. Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 23

Narrow drawer Application Description Basic components For inside drawer widths of 95 (3-3/4") to 124 (4-7/8") Special narrow locking device required Maximum dynamic load rating for narrow drawer locking device is 25 lb Minimum 16 (5/8") sub front thickness Available spring 2013 Rear mounting bracket for face frame only Locking device Runner Components Runner set One set required per drawer BLUMOTION inside Narrow drawer applications are possible with any TANDEM plus BLUMOTION runner. See the installation instructions for the runner used. TANDEM plus BLUMOTION 563. series page 12 563H series page 14 563F series page 16 Narrow drawer locking device One right and one left required per drawer For use with narrow drawers Maximum dynamic load capacity 25 lb Self-adjusting drawer length tolerance Vertical mount, two-piece nylon Minimum inside drawer width 95 (3-3/4") Height adjustment +3 (1/8") Minimum sub front thickness 16 (5/8") Designed for 13 (1/2") drawer bottom recess For use with 563/569 series runners only Rear mounting bracket for frame cabinets For use when installing TANDEM runners in face frame cabinets. Not necessary for panel cabinet installation. Two required per drawer Depth and lateral self-alignment Zinc-coated steel For 9" TANDEM rear attachment options see page 32 Right locking device T51.0801.20 R Installation Left locking device T51.0801.20 L page 25 Installation screw Non-handed bracket 295.3750.01 Installation screw Using TANDEM page 10 Drawer preparation page 11 Accessories page 40 Assembly aids page 42 24 2012 Blum, Inc. Subject to technical modifications without notice.

Drawer and cabinet specifications Attach locking devices 1 Position locking device in front corner of the drawer 2 Pre-bore locking device mounting screw holes with Ø2.5 mm piloting bit 3 Attach with two screws 4 Repeat on the other side 16 (5/8") min. 95 (3-3/4") to 124 (4-7/8") NOTE: A minimum of 16 (5/8") sub front thickness is required for mounting the narrow drawer locking device. Drawer back preparation Rear view 7 (9/32") Ø6 x 1 0 bo r e f or hook 1 1 (7/ 1 6") 13 (1/2") 35 (1-3/8") minimum rear notch Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 25

Roll-out shelf Application Description Possible with any TANDEM runner 100 lb static load capacity Basic components Locking device Runner Components Shelf size and position in opening Front view opening width Rear mounting block Attach rear mounting block to the back of the shelf instead of notching and boring. 13 (1/2") opening width minus 42 for H opening width minus 49 for F 8 (5/16") 20 (25/32") 16 (5/8") 10 (13/32") Calculating outside shelf width runner F/A series H/. series apron thickness deduct from opening width apron thickness 19 (3/4") 18 (23/32") 17 (21/32") 16 (5/8") 15 (19/32") 14 (9/16") 13 (1/2") 12 (15/32") 11 (7/16") 13 (1/2") 15 (19/32") 10 (13/32") 12 (15/32") 14 (9/16") 16 (5/8") 18 (23/32") Eliminates the need to edge bore holes for hooks on roll-outs NOTE: Shelf length = specified runner length minus 10 (13/32") Rear mounting block Installation screw T51.7000.01 6064N Side adjustable locking device One right and one left required per drawer With side-to-side adjustment Self-adjusting drawer length tolerance Minimum inside drawer width 170 (6-11/16") Height adjustment +3 (1/8") Side adjustment ±1.5 (1/16") For use with 563/569 series runners only For other options see page 30 Shelf assembly Set side apron 1/8" from back shelf panel T51.1901 Right locking device T51.1901 R Installation Left locking device T51.1901 L page 11 Installation screw Align inside of mounting block tip with inside edge of the apron 26 2012 Blum, Inc. Subject to technical modifications without notice.

Bottom mount drawer Application Description Basic components Use 563H, 563. or 563F series in 15", 18" and 21" lengths Face frame or panel cabinets Application is possible with any TANDEM 563/569 locking device 13 (1/2") to 19 (3/4") drawer thickness 100 lb load capacity Heavy duty bottom mount application possible with 568R runners on page 36 Locking device Runner Components Runner set One set required per drawer BLUMOTION inside Maximum drawer material thickness 16 (5/8") 19 (3/4") Wood screw for installation System screw for installation For overall cabinet depth Drawer length TANDEM plus BLUMOTION 610 (24") 533 (21") 563.5330B 533 (21") 457 (18") 563.4570B 610 (24") 533 (21") 563H5330B 533 (21") 457 (18") 563H4570B 457 (18") 381 (15") 563H3810B 610 (24") 533 (21") 563F5330B 533 (21") 457 (18") 563F4570B 457 (18") 381 (15") 563F3810B 662.1150.HG Runner mounting specifications Top view X 9 (11/32") 9 (11/32") 67 (2-5/8") Z Y 3 (1/8") TANDEM plus BLUMOTION runner length minimum inside cabinet depth X Y Z 563.5330B 533 (21") 557 (21-15/16") 358 (14-3/32") 12 (15/32") 19 (3/4") 563.4570B 457 (18") 480 (18-29/32") 358 (14-3/32") 12 (15/32") 19 (3/4") 563H5330B 533 (21") 557 (21-15/16") 448 (17-5/8") 12 (15/32") 19 (3/4") 563H4570B 457 (18") 480 (18-29/32") 378 (14-7/8") 12 (15/32") 19 (3/4") 563H3810B 381 (15") 404 (15-29/32") 319 (12-9/16") 12 (15/32") 19 (3/4") 563F5330B 533 (21") 557 (21-15/16") 448 (17-5/8") 15.5 (5/8") 22.5 (7/8") 563F4570B 457 (18") 480 (18-29/32") 378 (14-7/8") 15.5 (5/8") 22.5 (7/8") 563F3810B 381 (15") 404 (15-29/32") 319 (12-9/16") 15.5 (5/8") 22.5 (7/8") Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 27

SPACE CORNER Application Description Basic components Use longer length heavy duty TANDEM plus BLUMOTION runners Requires special cabinet and drawer construction (see note below) For 16 (5/8") max. drawer side material use 569. series For 19 (3/4") max. drawer side material use 569A series 150 lb load capacity Components Runner set One set required per drawer BLUMOTION inside Sample SPACE CORNER drawer and cabinet plans are available for download at blum.com Corner cabinet size Maximum 5/8" drawer side thickness Maximum 3/4" drawer side thickness 36", 39" or 42" 569.6860B 569A6860B Wood screw for installation System screw for installation 662.1150.HG NOTE: SPACE CORNER requires special cabinet and drawer construction. See suggestions on cabinet construction at blum.com. Side adjustable locking device One right and one left required per drawer With side-to-side adjustment Captive right and self-aligning left device Self-adjusting drawer length tolerance Steel base with synthetic, spring-loaded release levers Minimum inside drawer width 170 (6-11/16") Height adjustment +3 (1/8") Side adjustment ±1.5 (1/16") For use with 563/569 series runners only For other options see page 30 Measuring corner cabinet size Top view corner cabinet size Right locking device T51.1901 R Installation Left locking device T51.1901 L page 11 Installation screw Using TANDEM page 10 Drawer preparation page 11 Accessories page 40 Assembly aids page 42 28 2012 Blum, Inc. Subject to technical modifications without notice.

150 lb. Drawer construction For a 39" SPACE CORNER using 5/8" material and 569.6860B Top view For a 39" SPACE CORNER using 3/4" material and 569A6860B Top view 475 (18-11/16") 473 (18-5/8") 256 (10-1/16") 181 (7-1/8") 57 (2-1/4") 179 (7-1/16") 57 (2-1/4") 254 (10") 443 (17-7/16") 435 (17-1/8") 789 (31-1/16") 670 (26-3/8") 495 (19-1/2") 16 (5/8") optional cross rail 797 (31-3/8") 670 (26-3/8") 495 (19-1/2") 19 (3/4") optional cross rail 79 (3-1/8") 81 (3-3/16") 79 (3-1/8") 90 blocking underneath for locking device 81 (3-3/16") 90 blocking underneath for locking device Mounting locations Side view D C B A 9 (11/32") runner length setback TANDEM plus BLUMOTION drawer material setback A B C D 569.6860B 16 (5/8") 107 (4-7/32") 114 (4-1/2") 141 (5-9/16") 365 (14-3/8") 493 (19-13/32") 569A6860B 19 (3/4") 116 (4-9/16") 123 (4-27/32") 150 (5-29/32") 374 (14-23/32") 502 (19-3/4") NOTE: Detailed drawings for cabinet construction are available at blum.com Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 29

Locking devices for 563/569 series With side adjustment Standard One right and one left required per drawer With side-to-side adjustment Captive right device and self-aligning left device Self-adjusting drawer length tolerance Steel base with synthetic, spring-loaded release levers Minimum inside drawer width 170 (6-11/16") Height adjustment +3 (1/8") Side adjustment ±1.5 (1/16") Right locking device Left locking device Installation screw T51.1901 R T51.1901 L Vertical mount One right and one left required per drawer Vertical mount locking device used to minimize sub front splitting Captive right device and self-aligning left device Self-adjusting drawer length tolerance Steel base with synthetic, spring-loaded release levers Minimum inside drawer width 170 (6-11/16") Height adjustment +3 (1/8") Side adjustment ±1.5 (1/16") Minimum sub front thickness 16 (5/8") Designed for 13 (1/2") drawer bottom recess Available spring 2013 Right locking device Left locking device Installation screw T51.1901.20 R T51.1901.20 L Depth adjustable One right and one left required per drawer Captive right device and self-aligning left device Self-adjusting drawer length tolerance Steel base with synthetic, spring-loaded release levers Minimum inside drawer width 170 (6-11/16") Height adjustment +3 (1/8") Side adjustment ±1.5 (1/16") Depth adjustment +2.5 (3/32"), preset at 0 Minimum sub front thickness 13 (1/2") Designed for 13 (1/2") drawer bottom recess Integrated 3 (1/8") distance bumper for inset or overlay SERVO-DRIVE applications Right locking device Left locking device Installation screw T51.1901.PS R T51.1901.PS L 30 2012 Blum, Inc. Subject to technical modifications without notice.

Without side adjustment Standard One right and one left required per drawer For use with standard applications Captive right device and self-aligning left device Self-adjusting drawer length tolerance Zinc die-cast with synthetic, spring-loaded release levers Minimum inside drawer width 124 (4-7/8") Height adjustment +3 (1/8") Available spring 2013 Right locking device Left locking device Installation screw T51.1801 R T51.1801 L Vertical mount One right and one left required per drawer Vertical mount locking device used to minimize sub front splitting Captive right device and self-aligning left device Self-adjusting drawer length tolerance Zinc die-cast with synthetic, spring-loaded release levers Minimum inside drawer width 124 (4-7/8") Height adjustment +3 (1/8") Minimum sub front thickness 16 (5/8") Designed for 13 (1/2") drawer bottom recess Available spring 2013 Right locking device Left locking device Installation screw T51.1801.20 R T51.1801.20 L Narrow drawer One right and one left required per drawer For use with narrow drawers Maximum dynamic load capacity 25 lb Captive right device and self-aligning left device Self-adjusting drawer length tolerance Vertical mount, two-piece nylon Minimum inside drawer width 95 (3-3/4") Height adjustment +3 (1/8") Minimum sub front thickness 16 (5/8") Designed for 13 (1/2") drawer bottom recess Available spring 2013 Right locking device Left locking device Installation screw T51.0801.20 R T51.0801.20 L Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 31

Rear attachment options Screw-on bracket For TANDEM 563 H/F series runners only Lateral self-alignment 3 (1/8") Non-handed, one-piece stamped steel design, zinc-coated Two required per drawer Use at least three #6 wood screws Not for use with 9" runners 16 32 (5/8") (1-1/4") 2 (3/32") 21 (13/16") 14.4 (9/16") face frame stile face frame rail Screw-on bracket 295.3750.01 NOTE: Drawing to the right is for 563 series Installation screw Narrow screw-on bracket For TANDEM 563 H/F series runners only For applications with side recess space limitations (end panel) Maximum dynamic load capacity 45 lb Lateral self-alignment 3 (1/8") Non-handed, one-piece stamped steel design, zinc-coated Two required per drawer Use at least two #6 wood screws Not for use with 9" runners 16 32 (5/8") (1-1/4") 2 (3/32") 14 (9/16") face frame rail 14.4 (9/16") face frame stile Screw-on bracket 295.3550.01 Installation screw Plug-in socket For TANDEM 563 H/F series runners only Lateral self-alignment feature Non-handed, two-piece design Synthetic, natural color Non-detachable 8 (5/16") dowels, 9.5 (3/8") long Two required per drawer 6 (1/4") minimum back panel thickness Not for use with 9" runners 32 (1-1/4") 3.2 (1/8") Ø8 16 (5/8") face frame stile face frame rail Plug-in socket 295.6410 Installation screw 32 2012 Blum, Inc. Subject to technical modifications without notice.

Screw-on socket For TANDEM 563 H/F series runners only Lateral self-alignment Non-handed, two-piece design Synthetic, natural color Two required per drawer Use two #6 flat head wood screws Not for use with 9" runners 40 (1-9/16") 2 (3/32") 19 (3/4") 9 (11/32") 37 (1-15/32") 6.5 (1/4") face frame stile face frame rail Screw-on socket 295.6400 Installation screw Screw-on socket for 9" TANDEM plus BLUMOTION runners For TANDEM 563 H/F series 9" runners only For use only when installing 9" runners in face frame cabinets For inside c abinet depth 266 (10-15/32") 282 (11-3/32") Lateral self-alignment Non-handed, two-piece design Synthetic, natural color Two required per drawer Use at least three #6 wood screws 32 (1-1/4") 17.5 (11/16") 4 (5/32") 39.5 (1-9/16") face frame rail 16 (5/8") face frame stile Screw-on socket 295.3700.21 Installation screw Screw-on socket for 9" TANDEM plus BLUMOTION runners For TANDEM 563 H/F series 9" runners only For use only when installing 9" runners in face frame cabinets For inside c abinet depth 283 (11-5/32") 299 (11-25/32") Lateral self-alignment Non-handed, two-piece design Synthetic, natural color Two required per drawer Use at least three #6 wood screws 32 17.5 (1-1/4") (11/16") 4 (5/32") 39.5 (1-9/16") face frame rail 16 (5/8") face frame stile Screw-on socket 295.3700.22 Installation screw Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 33

Waste/recycle drawer with SERVO-DRIVE Application Description Pre-assembled bottom mount set TANDEM plus BLUMOTION heavy duty full extension concealed drawer runners For 12", 15" and 18" minimum opening widths For 16 (5/8") max. drawer side thickness For face frame and panel applications Tool-free height and tilt adjustment Maximum 6 (1/4") cabinet bottom recess 125 lb static load capacity SERVO-DRIVE touch-to-open feature Basic components NOTE: Drawer and bins not included Components TANDEM waste/recycle set One set required per drawer SERVO-DRIVE inside BLUMOTION inside Set includes: 1 TANDEM plus BLUMOTION heavy duty runner set with pre-mounted #6 x 1" wood screws for installation (qty 8) 2 Standard locking device (qty 2) with #6 x 1/2" truss head wood screws for installation (qty 4) Installation template and instructions 1 Minimum opening width Drawer length TANDEM plus BLUMOTION set 2 305 (12") 533 (21") 568R5337BB 381 (15") 533 (21") 568R5337BD 457 (18") 533 (21") 568R5337BF SERVO-DRIVE waste/recycle set One set required per drawer 5 4 8 7 6 2 1 Set includes: 1 Drive unit (pre-attached) 2 Double bottom bracket with #6 x 1" wood screws (qty 2) 3 Adapter plate 4 110V plug-in power supply with six feet of universal cable 5 Screw-on distance bumpers (qty 4) with #6 x 5/8" wood screws for installation (qty 8) 6 INSERTA cable connector 7 Cable end protectors (qty 2) 8 Cable clips (qty 4) Installation template, instructions and user manual 3 SERVO-DRIVE waste/recycle set Z10NA20UGUS 34 2012 Blum, Inc. Subject to technical modifications without notice.

Maximum drawer thickness 16 (5/8") Lengths available 21" Static load capacity 125 lb Drawer and cabinet specifications Drawer box specifications Front view opening width outside drawer width 6 (1/4") minimum top clearance Important Bin width and height must be considered when designing your cabinet and drawer (see the diagram on the left). Minimum inside cabinet depth With SERVO-DRIVE 577 (22-23/32") maximum height with bin = opening height minus 27 (1-1/16") opening height Without SERVO-DRIVE 556 (21-7/8") Drawer back preparation Rear view 21 (13/16") drawer side thickness 16 (5/8") max. 7 (9/32") Ø6 x 1 0 bo r e f or hook 13 (1/2") 21 (13/16") maximum bottom clearance depending on cabinet bottom recess 1 1 (7/ 1 6") 13 (1/2") 35 (1-3/8") minimum rear notch For drawer side thickness Waste/recycle set opening width Z 16 (5/8") 15 (19/32") 14 (9/16") 13 (1/2") 12 (15/32") 568R5337BB 305 (12") 141.5 (5-9/16") 295 (11-5/8") 293 (11-17/32") 291 (11-15/32") 289 (11-3/8") 287 (11-5/16") 568R5337BD 381 (15") 179.5 (7-1/16") 371 (14-19/32") 369 (14-17/32") 367 (14-7/16") 365 (14-3/8") 363 (14-9/32") 568R5337BF 457 (18") 217.5 (8-9/16") 447 (17-19/32") 445 (17-17/32") 443 (17-7/16") 441 (17-3/8") 439 (17-9/32") NOTE: Drawer length is 533 (21") for all sets Outside drawer width Set mounting specifications Top view 30 (1-3/16") 432 (17") 30 37 (1-3/16")(1-15/32") Z 546 (21-1/2") minimum inside cabinet depth 4 (5/32") centerline of cabinet NOTE: Orange dots indicate pre-mounted screw locations. All four are required to meet specified load capacities. Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 35

Bottom mount drawer - heavy duty Application Description Basic components Full extension bottom mount concealed drawer runners with BLUMOTION For 16 (5/8") max. drawer side thickness For face frame and panel applications Tool-free height and tilt adjustment Concealed roller carriages with permanently lubricated synthetic rollers create a smooth running action Locking devices enable easy drawer insertion and removal 125 lb static load capacity Locking device Runner Applications Bottom mount drawer Interior roll-out Roll-out shelf Components TANDEM plus BLUMOTION bottom mount runner set One set required per drawer BLUMOTION inside Set includes: 1 TANDEM plus BLUMOTION heavy duty runner set with #6 x 5/8" wood screws for installation (qty 10) 2 Standard locking device (qty 2) with #6 x 1/2" truss head wood screws for installation (qty 4) Instructions 1 2 Overall cabinet depth Drawer length TANDEM plus BLUMOTION set 610 (24") 533 (21") 568R5330B NOTE: These runners are for 16 (5/8") maximum drawer side thickness Wood screw for installation 606W Interior roll-outs and roll-out shelf applications Interior roll-outs and roll-out shelf applications must be mounted to the bottom of the cabinet or to a fixed shelf/panel. Rear brackets and sockets cannot be used. Cabinet bottom must be flush with top surface of bottom rail. 36 2012 Blum, Inc. Subject to technical modifications without notice.

Maximum drawer thickness 16 (5/8") Lengths available 21" Static load capacity 125 lb Drawer and cabinet specifications Drawer box specifications Front view Drawer back preparation Rear view opening width 6 (1/4") minimum top clearance 7 (9/32") Ø6 x 1 0 bo r e f or hook opening width minus 42 1 1 (7/ 1 6") 21 (13/16") 13 (1/2") drawer side thickness maximum 16 (5/8") drawer height maximum = opening minus 20 (13/16") opening height 35 (1-3/8") minimum rear notch Runner comparison 13 (1/2") Side view #6 wood screws 14 (9/16") bottom clearance 568R No vertical profile NOTE: Material thickness may vary. Inside drawer width must equal opening width minus 42 for TANDEM to align and run properly. Calculating outside drawer width For drawer side thickness 16 (5/8") 15 (19/32") 14 (9/16") 13 (1/2") 12 (15/32") Deduct from inside cabinet width 10 (13/32") 12 (15/32") 14 (9/16") 16 (5/8") 18 (23/32") Example: For 21" inside cabinet width and a 5/8" thick drawer, 21" minus 3/8" = 20-5/8" drawer width 568H Vertical profile Profile mounting specifications Top view 30 (1-3/16") 432 (17") 30 37 (1-3/16")(1-15/32") 11 (7/16") 546 (21-1/2") 556 (21-7/8") minimum 4 (5/32") NOTE: Orange dots indicate screw locations required to meet specified load capacities (minimum 4 screws) Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 37

TIP-ON for TANDEM plus Overlay application Description Basic components Designed for drawers without pulls Opens the drawer with just a touch of the drawer front Tool-free attachment of the mechanism and trigger Optimal dynamic load capacity 45 lb 100 lb static load capacity Only works with TANDEM plus 562 H/F series runners without BLUMOTION Runner TIP-ON mechanism Components TIP-ON for TANDEM plus set One set required per drawer TIP-ON inside 1 Set includes: 1 TIP-ON mechanisms (qty 2) 2 Adjustable triggers (qty 2) 3 3 Rear hook spacers (qty 2) 2 TIP-ON for TANDEM plus set T55.7150S Runner set One set required per drawer For overall cabinet depth Drawer length 5/8" maximum drawer thickness TANDEM plus 3/4" maximum drawer thickness 610 (24") 533 (21") 562H5330C 562F5330C 533 (21") 457 (18") 562H4570C 562F4570C 457 (18") 381 (15") 562H3810C 562F3810C 381 (15") 305 (12") 562H3050C 562F3050C Wood screw for installation 707N 707N System screw for installation 661.1300.HG 661.1300.HG Standard locking device One right and one left required per drawer Minimum inside drawer width 121 (4-3/4") Height adjustable +3 (1/8") For 562/568 series only Rear mounting bracket for frame cabinets For use when installing TANDEM runners in face frame cabinets. Not necessary for panel cabinet installation. Two required per drawer Depth and lateral self-alignment Zinc-coated steel Right locking device Left locking device Installation screw T51.1700.04 R T51.1700.04 L 612TH Non-handed bracket 295.3750.01 Installation screw 612TH 38 2012 Blum, Inc. Subject to technical modifications without notice.

Maximum drawer thickness 19 (3/4") Lengths available 12" - 21" Static load capacity 100 lb Specifications TANDEM 562H dimensions Front view 6 (1/4") min. TANDEM 562F dimensions Front view 6 (1/4") min. Drawer back preparation Rear view 7 (9/32") Ø6 x 10 bore for hook 38 (1-1/2") 38 (1-1/2") 11 (7/16") 1 (1/32") min. 21 (13/16") 106 (4-3/16") 1 (1/32") min. 24.5 (31/32") 109.5 (4-5/16") 13 (1/2") 85 (3-11/32") minimum rear notch NOTE: Minimum cabinet opening width for TIP-ON is 229 (9") TIP-ON for TANDEM plus synchronization set (optional) 1 2 Recommended for cabinet widths from 610 (24") 1220 (48") wide (panel and face frame) Synchronizes left and right TIP-ON mechanisms to improve function on wide drawers Set includes: 1 Linkage rod, length 908 (35-3/4") 2 Pinion gears (qty 2) Instruction sheet TIP-ON for TANDEM plus synchronization set T55.908WR Assembly and adjustment Step one Attachment of mechanism Step two Attachment of trigger 2 1 1 2 click Step three Attachment of rear hook spacer Step four Front gap adjustment Trigger allows -1 (1/32") in and +2 (1/16") out adjustment of the drawer front. + - - + NOTE: Minimum front gap = 2.5 (3/32") Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 39

Accessories Deep thread system screw Pilot bore Ø5 (3/16") hole Deep thread wood screw Truss head wood screw Pilot bore Ø2 (3/32") hole Ø5 #6 x 11.5 mm, #2 POZI 662.1150.HG #7 x 13 mm, #2 POZI 661.1300.HG #7 x 14.5 mm, #2 POZI 661.1450.HG #6 x 5/8", #2 Phillips 606N #6 x 5/8", #2 POZI 606P #6 x 1", #2 Phillips 606W #7 x 5/8", #2 Phillips 707N #6 x 1/2", #2 Phillips 612TH Bumpers POZI DRIVER and bits A POZI screwdriver (different from Phillips) is the most crucial tool you can use to assure that full torque is applied to all Blum mounting screws. POZI screws can be identifi ed by the distinctive tick marks located in the center of the screw head recess. POZI Phillips Cushions door closing Clear with a self-adhesive back Ø7.5 (9/32") x 2 (3/32") FX4041 Ø12 (15/32") x 3.5(1/8") SJ5312 Tick marks #2 POZI DRIVER POZI DRIVER 1/4" Magnetic bit holder BIT HOLDER #2 x 1" POZI bit insert POZI BIT #2x1 #2 x 2" POZI bit insert POZI BIT #2x2 40 2012 Blum, Inc. Subject to technical modifications without notice.

a TANDEM end cap Side spacer For spacing out TANDEM runners from the cabinet side for clearance on interior roll-outs. Drawer front adjuster Nylon housing with pre-mounted 8-32 steel nut. For four-sided drawers. Adjusts height and side-to-side by 5 (3/16"). To cover the front edge of TANDEM cabinet runners when used in an interior roll-out application Can be used with TANDEM 563 H/F/. runners Right end cap 295.5520 Left end cap 295.5521 Side spacer - 1" thick T59.3570 POZI installation screw 661.1300.HG Drawer front adjuster 295.1000.21 NOTE: See next page for marking gauge TANDEM plus runner cover Attachment Removal 2 1 2 1 Nylon cover to help protect the runner against dust and debris Available in 533 (21") only and can be cut to size Designed for 563/569 H/F TANDEM plus cover 295.5510 1 2 Lay the cover on top of the runner Slide it to the back 1 2 Slide the cover forward slightly Lift the cover off from the rear Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 41

Assembly aids Drawer front adjuster marking gauge For marking center holes for press-in drawer front adjusters For wooden four-sided drawers Using the marking gauge 1 Pre-bore for front adjusters Insert marking gauges into drawer front 2 Align the drawer front to make marks in the drawer box 10 (13/32") 20 (13/16") 3 Mark fixing positions with a light tap onto 4 the drawer front Bore Ø5 (3/16") holes through the drawer box Marking gauge 65.2950.10 TANDEM template Essential tool for drawers using 563/569 series TANDEM runners To bore the Ø6 mm holes for rear hooks Pre-bore Ø2.5 mm hole for TANDEM locking devices at the required angle Using the TANDEM template 1 Bore rear fixing holes 2 Pre-bore holes for locking device screws For 563/569 series T65.1600 Ø6 mm bit Ø2.5 mm bit with extension Tool set includes: For 562/568 series T65.1000.02 Accessories (order separately) Ø2.5 mm drill bit DB-2.5mm A B C D A Ø2.5 mm drill bit extension B Ø6 mm stop collar C #2 Phillips screwdriver tip D Allen wrench Ø6 mm drill bit DB-6mm Tool set T65.9000 NOTE: Items NOT sold separately 42 2012 Blum, Inc. Subject to technical modifications without notice.

a Universal individual template For pre-boring TANDEM drawer runners Also used for marking/pre-boring other Blum drawer systems, AVENTOS locating pins, hinge mounting plates, BLUMOTION adapters, and TIP-ON adapters Calibrated scale for accurate setting Set includes: Universal individual template Ø2.5 mm and Ø5 mm stop collars Allen wrench Universal individual template 65.1051.01 Cabinet profile template set Used for pre-boring holes for TANDEM drawer runners Also used for marking/pre-boring other Blum drawer systems, AVENTOS locating pins and hinge mounting plates, Cabinet profile template 65.1000.01 Replacement template 65.1001.01 Ø2.5 mm drill bit DB-2.5mm Ø5 mm drill bit DB-5mm Components 1 3 4 Set includes: 1 Rail, 1 meter long 2 Replacement template (qty 4) 3 Ø2.5 mm stop collar 4 Ø5 mm stop collar 5 Allen wrench 2 5 NOTE: ONLY the replacement template is sold separately Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 43

Other accessories ORGA-LINE Most kitchen buyers want more storage space and organization in their kitchens. ORGA-LINE adjustable organization system is Blum s solution for optimizing storage space in drawers and can be customized to meet individual needs. No more looking for the lid to a pot or searching for a hand mixer. ORGA-LINE creates a place for everything in your kitchen. SERVO-DRIVE SERVO-DRIVE is an electrical opening assist for TANDEM and TANDEMBOX. Drawers open automatically with just a touch of the drawer front or with a light pull of the handle. This unique feature is based on an electrical drive that, once activated, opens the drawer for you. Existing cabinets can be easily retrofitted with SERVO-DRIVE. No modifications to the drawer system are necessary when upgrading. With SERVO-DRIVE, the drawer is not connected to the drive unit. This enables the drawer to be stopped at any position, providing you full control. SERVO-DRIVE inside 44 2012 Blum, Inc. Subject to technical modifications without notice.

Part number index Page no. 65.1000.01 43 65.1001.01 43 65.1051.01 43 65.2950.10 42 295.1000.21 41 295.3550.01 32 295.3700.21 33 295.3700.22 33 295.3750.01 32 295.5510 41 295.5520 41 295.5521 41 295.6400 33 295.6410 32 562F3050C 38 562F3810C 38 562F4570C 38 562F5330C 38 562H3050C 38 562H3810C 38 562H4570C 38 562H5330C 38 563.4570B 12, 27 563.5330B 12, 27 563F2290B10 16 563F3050B 16 563F3810B 16, 27 563F4570B 16, 27 563F5330B 16, 27 563H2290B10 14 563H3050B 14 563H3810B 14, 27 563H4570B 14, 27 563H5330B 14, 27 568R5330B 36 568R5337BB 34 568R5337BD 34 568R5337BF 34 569.6100B 18 569.6860B 18, 28 569.7620B 18 569A6100B 20 569A6860B 20, 28 569A7620B 20 569F4570B 20 i 569F5330B 20 569H4570B 18 569H5330B 18 606N 40 606P 40 606W 40 612TH 40 661.1300.HG 40 661.1450.HG 40 662.1150.HG 40 707N 40 DB-2.5mm 42, 43 DB-5mm 43 DB-6mm 42 FX4041 40 #2 POZI DRIVER 40 POZI BIT #2x1 40 POZI BIT #2x2 40 SJ5312 40 T51.0801.20 31 T51.1801 31 T51.1801.20 31 T51.1901 30 T51.1901.20 30 T51.1901.PS 30 T51.7000.01 26 T55.7150S 38 T55.908WR 38 T59.3570 41 T59.A5P0S 22 T65.1000.02 42 T65.1600 42 T65.9000 42 Z10NA20UGUS 34 mm Conversion chart inch 1 1 /32.031 1.5 1 /16.063 2 3 /32.094 3 1 /8.125 4 5 /32.156 5 3 /16.188 5.5 7 /32.219 6 1 /4.25 7 9 /32.281 8 5 /16.313 9 11 /32.344 9.5 3 /8.375 10 13 /32.406 11 7 /16.438 12 15 /32.469 13 1 /2.5 13.5 17 /32.531 14 9 /16.563 15 19 /32.594 16 5 /8.625 17 21 /32.656 17.5 11 /16.688 18 23 /32.719 19 3 /4.75 20 25 /32.781 20.5 13 /16.813 21 27 /32.844 22 7 /8.875 23 29 /32.906 24 15 /16.938 24.5 31 /32.969 25.4 1 1 Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 45

Blum, Inc. Headquarters, Stanley NC 46 2012 Blum, Inc. Subject to technical modifications without notice.

Why choose Blum Blum, Inc. is a leading manufacturer of functional hardware for the kitchen cabinet and commercial casework industries specializing in lift systems, concealed hinges and drawer runner systems. Virtually all of the hardware needed to assemble and make cabinets functional is available within the wide range of quality Blum products. Blum supports the U.S. market with a network of more than 150 dependable distributors, 40+ knowledgeable Blum sales representatives and an experienced customer service department. Commitment to manufacturing in the U.S. Blum manufactures many of its products in our 450,000 sq ft manufacturing, logistics and warehouse facility located in Stanley, North Carolina. Manufacturing closer to the customer allows Blum to react quickly to changing customer needs including unexpected surges in demand. Customer pickups and deliveries can be timed to better match their production schedules. Blum is committed to manufacturing in the U.S. for the U.S. market. Product development at Blum considers all of the various customers who will come in contact with our products. With this Global Customer Benefi ts philosophy we strive to create advantages for all users. Blum, Inc. is ISO 9001 certifi ed which means that you are assured of consistent quality in every Blum product. What s more they exceed the requirements of ANSI/ BHMA standards for cycle life, static load and self-closing performance. Dimensions in millimeters (inch equivalents as noted) 2012 Blum, Inc. 47

Please visit blum.com for information on other Blum products. LIT.TDM1100.07.12 2012 Blum, Inc. Printed in the USA. Blum, Inc. 7733 Old Plank Rd. Stanley, NC 28164 800-438-6788 blum.com FSC LOGO