LADDER PARTS J- ANCHORS, WEDGES & BOLTS WEDGE PROFILES A B C D E F G SEE PAGE J- FOR FULL SIZE PHOTOS DECK ANCHORS AND FLANGES BOLT & WASHER WEDGE 7 8 * 00-07 WEDGE KIT W/ BOLT 8-A A 00-0A WEDGE, BRASS W/BOLT - HANOVER B 00-0B WEDGE W/BOLT - HAYWARD (BRASS) SP9-B-A C 00-0D WEDGE, BRASS W/BOLT, AMCRETE WA D 00-0E WEDGE, BRASS W/BOLT, FROST 0 E 00-0C WEDGE, BRASS, ALLOY BRASS E 00-0C BOLT&WASHER, ALLOY BRASS 00 F 00-0F WEDGE,CYCOLAC W/BOLT - HAYWARD SP9-CA (PLASTIC) G REPLACE NLA WEDGE, DOUPLE REP W/ 00-07 8- G REPLACE NLA WEDGE REP W/ 00-07 S-00 ** FOR DOUBLE SOCKET ANCHOR SET 0-0 BRONZE DECK ANCHOR, PS-09-BC 0- CORROSION RESISTANT BRONZE PS-09-ABZ DECK ANCHOR -0 ALUMINUM DECK ANCHOR AS-00-A 00-0 SLIDE FLANGE - WHITE ALUMINUM, WITH PF-9-A HARDWARE & CONCRETE ANCHORS 00- SLIDE FLANGE KIT - WHITE ALUMINUM 7-09-000 WITH BOLT & NUT 00-0 SLIDE FLANGE - WHITE PLASTIC 0- (CONCRETE ANCHORS NOT ) 00-0 FLANGE KIT 7-09-8-S OF KEY # WITH CONCRETE BOLTS * 00-0 HARDWARE KIT FOR PLASTIC SLIDE 7-09-8 FLANGE (INCL. BOLT, ANCHORS) 00A ABOVE GROUND LADDER FLANGE PF--L WHITE ALUMINUM, FOR." RAIL -0 LADDER HINGE, BRONZE PAIR () JH-009-B -0 ANCHOR COVER, CAST BRASS PE-8 7 077-0 DECK ANCHOR REPAIR PLATE 8 0-0 HANDRAIL REMOVAL TOOL 0 ESCUTCHEONS ITEM # DESCRIPTION MFG. # -0 CHROME PLATED PLASTIC FOR.9" RAIL PE-009-C -0 HAYWARD CHROME PLATED FOR.9" RAIL SP-0-0 HAYWARD PLASTIC FOR.9 RAIL SP0 7-0 STAINLESS STEEL FOR.9" RAIL PE-009-S -0 DOUBLE ESCUTCHEON CP PLASTIC 8-0 9-0 CHROME PLATED BRASS PE-009-CPB ESCUTCHEON - OBLONG FOR.9 RAIL -0 EXTRA TALL ESCUTCHEON - WHITE ALUMINUM PE-009-WT.9 RAIL 8-00 SNAP TITE ESCUTCHEON - CHROME EP-00-MC 98-70 CLIP ON ESCUTCHEON - CHROME 7-0 * 98-70 CLIP ON ESCUTCHEON - CHROME 7-00 * 8-0 SNAP TITE ESCUTCHEON - WHITE EP-00-PW * 8-0 EXTRA TALL ESCUTCHEON FOR. RAIL SS EP-0
LADDER WEDGES (THESE ARE ACTUAL SIZE) J- 00-0A (BRASS) 00-0B (BRASS) /8 / 7/8 /8 /8 A B 00-0C(BRASS) BOLT NOT 7/8 00-0D(BRASS) 7/ 7/8 / C E 00-0F(PLASTIC) / 00-0E(BRASS) /8 9/ 7/ / & G 00-0G(BRASS) REPLACED WITH 00-07, PLATE / D 7/8 F / / / 00-0H(BRASS) (REPLACED BY 00-07) G
LADDER PARTS J- BUMPERS A 00-0A LADDER BUMPER, INSERT.90" B OBSOLETE OBSOLETE BUMPER.90" C 00-0C LADDER BUMPER, DUAL -.90" C 00-0F LADDER BUMPER,." RICHARDSON/ SEABLUE, ASTRAL * 00-0E LADDER BUMPER,.9 XPAND-N-LOCK * SEE PHOTO BELOW LADDER TREADS DIMENSIONS KEY CAT. NO. DESCRIPTION A B 00-0A STEP, LADDER, S.S..90" 8 /8" INCLUDES () 00-0B NUT & BOLT 00-0B STEP, LADDER, ELITE STAINLESS.90" 8 /8" 00-0H STEP, LADDER, ELITE STAINLESS.90" 8 /8" - PLATFORM/LIFEGUARD STANDS 700-00 INTERFAB SURE STEP, STAINLESS.90" 8 /8" GRAY 00-0C STEP, LADDER, PLASTIC.90" 8 /8" 00-0E STEP, LADDER, PLASTIC.90" 7 /" 00-0 STEP, LADDER, PLASTIC.90" 7 /" 00-0G STEP, LADDER, PLASTIC.90" 8 /8" 00-08 ASTRAL TREAD.90" 8 /8" Insert Cup Dual A B C 00-0A INCLUDES NUTS & BOLTS A B Dimensions * 00- BLACK END CAP ONLY FOR 00-0B MFG# -00 00-0A 00-0C 00-0E 00-0F 00-0A INCLUDES () 00-0B NUT & BOLT 00-0E 700-00 00-0C 00-0B 00-0G 00-0 00-0H ( DEGREE TREAD)
LADDER PARTS OLYMPIC ACM-AS ABOVE GROUND J- Edited -- 00-8 WHITE HAND RAIL BUL-- 00-7 LADDER DECK FLANGE, SET OF BUL-- 00- SAFETY KIT FOR AMC-A, PANELS & BUL--SAF SECURITY STEPS 00- WHITE STEP EXTENSION BUL--EX 00- SWIVEL PAD FOR ACM-, SET OF BUL-- 00-9 COMPLETE LADDER HARDWARE (SCREWS) BUL--EX 7 00- PROTECTIVE 8 STEP BUL--8 8 00- SAFETY KIT FOR AMC-A, PANELS & BUL--SAF SECURITY STEPS 9 00- PROTECTIVE 8 STEP BUL--8SLO WITH SLOT ON EACH END 0 00- SAFETY KIT FOR AMC-A, PANELS & BUL--SAF SECURITY STEPS TOOLS Handrail Stabilizing Plugs Anchor type handrails are often crushed at the end by the underground anchor causing the handrail to loosen and become unstable. Deck Anchor Repair Plate Anchor repair plate allows anchor wedge to be tightened up against rail. Broken Deck Anchors can be repaired. 07-0 for.900 ID 07- for.87 ID When hammered into the crushed end of the handrail, the Handrail Stabilizing Plug rounds it out and provides a permanant strong support surface for the anchor to tighten against. ITEM # DESCRIPTION MFG. # 077-0 DECK ANCHOR REPAIR PLATE Rail Puller Forged steel puller bolts around Grab Rail or Ladder. Just use a 7/8 open end wrench and tighten nuts evenly. The puller will lift the rail out of the anchor socket. ITEM # DESCRIPTION MFG. # 07-0 HANDRAIL PLUG FOR.9 ID -A ITEM # DESCRIPTION 0-0 RAIL PULLER
LADDER PARTS CONTINUED J- LADDER BOLTS WITH NUTS / BOLT & #8 METRIC BOLT /8 BOLT 00-0A 00-0B SIZE LENGTH PRODUCT # / /" 00-0B / /" OBSOLETE #8 (/ ) 7/8 00-09 (SET OF ) /8 /" OBSOLETE /8 /" 00-0A /8 / 00-0D (SET OF ) OBSOLETE 00-09 DIVING BOARD PARTS A B A -0 MOUNTING KIT, BOLT, -/ BOLTS 7-09-9 B -0 MOUNTING KIT, BOLT, BOLTS 9-09-0 C A 8 STRAP MOUNTING KIT, BOLT 7-09-90 FOR 8, 0, BOARDS, BOLTS PLATE LENGTH IS ACTUALLY / C B 0 STRAP MOUNTING KIT, BOLT 7-09-90 FOR, BOARDS, -/ BOLTS PLATE LENGTH IS ACTUALLY 8 / C A = / LONG B = 8 / LONG D D 0-0 RUBBER FULCRUM PAD, 0 FC-00A E 0-0 PLASTIC MOUNTING WASHER W/COVER 0- (USED ON MOST HOLE BOARDS) F 0- / NUT CAP (/ IN DIAMETER) 0-8 FOR MOUNTING KIT BOLTS F 0- /8 NUT CAP (/ IN DIAMETER) -00 FOR DIVING BOARD JIG NUTS G -0 FRONTIER/PIONEER BOLT KIT 9-09-80-SS H -07 0/08 SPRING BOLT KIT 9-09-09-SS * B-0 SINGLE MOUNTING BOLT, NUT, WASHER 7-09-90 / LONG * 70-0 EPOXY KIT WITH () / BOLTS 7-09-87 * 7-0 EPOXY KIT WITH () / BOLTS 7-09-88 E F G H
G. L. I. PRODUCTS TIDAL WAVE ABOVE GROUND POOL SOLAR REEL J-8 7 Plastic Screw Plastic Strap Plate Fabric Straps SS Self Drilling Screw Driver Bit 8-0 AXLE END 700 8-0 BARREL WITH HANDLE 700 8-00 AXLE WITH CRANK HANDLE 7000 8-0 PLASTIC BOLT & NUT 700 8-0 MOUNTING BRACKET 700 8-0 LOCKING PIN 700 7 8-0 ABOVE GROUND STRAP KIT 700 INCLUDES (9) PLASTIC SCREWS, (7) PLASTIC STRAP PLATES, (8) FABRIC STRAPS, (8) SCREWS, () DRIVER BIT 8-0 8-0 8-0 8-0 G. L. I. PRODUCTS HURRICANE INGROUND POOL ALUMINUM SOLAR REEL 8-00 Plastic Plug 8 7 Strap Kit ( Pcs.) Plastic Screw ( extra piece) ( Pcs.) Plastic Strap Plate ( extra piece) ( Pcs.) Stainless Steel Self-Drillin Screws ( extra piece) ( Pcs.) Driver Bit (0 Pcs.) Fabric Straps ( Extra Piece) Aluminum Tubing (Depending on your tube pre-drills & hardware may vary) 8-0 8-08 8-0 ALLEN WRENCH 900 8-0 LOCKING COLLAR & ALLEN SCREW 9009 8-0 CRANK 9008 REPLACE NLA WHEEL BEARING REP W/8-00 90 8-00 BASE STAND W/ WHEEL BEARING 9007 8-08 ALUMINUM TUBE INSERT 90 8-09 ALUMINUM TUBE INSERT 90 7 8-0 / STAINLESS AXLE BOLT & NUT 90 7 8-07 / STAINLESS AXLE BOLT & NUT 90 8 8- INGROUND STRAP KIT 90 INCLUDES () PLATIC SCREW, () PLASTIC STRAP PLATE, () SS SCREW, (0) FABRIC STRAP), () DRIVE BIT * 8-0 CASTER BASE 907 * 8- CASTER 908 * 8- CASTER BASE ATTACHMENT SCREW 909 * 8- CASTER CUSTOM WRENCH 900 8-0 8-09
LADDER PARTS CONTINUED ATTENTION THIS PAGE IS ONLY AVAILABLE IN THE INTERNET VERSION OF THE POOL CATALOG. J- OLYMPIC ABOVE GROUND 00A ALUMINUM ANCHOR FOR ½" A.G. PF--L LADDER (PERMA-CAST) 00- SWIVEL PAD FOR ACM-0 & ACM-00 ACM-00- (SET OF ) 00- SWIVEL PAD FOR ACM- (SET OF ) ACM-- OBSOLETE OBSOLETE 9" STEP ACM-0 00-0B " STEP FOR ACM-0 (WHITE) ACM-0H OBSOLETE OBSOLETE STEP ACM-0 ACM-0B OBSOLETE OBSOLETE STEP ACM-00 ACM-00- MERMAID LA AMERICANA RAIL -0 COMPLETE RAIL, ANCHOR, & ESCUTCHEON -0 JIG, ANCHOR ASSY. ALUM -7-00 -0 ESCUTCHEON, POLISHED-ALUM -7-00 -0 BOLT, ANCHOR -7-007