E4RS/JS/JR II/III Parts List
|
|
|
- Donna Cameron
- 9 years ago
- Views:
Transcription
1 E4RS/JS/JR II/III Parts List Copyright: Lionel Troyon / HRC Distribution KF2201 Front Spool Set with Aluminium Outdrives REPLACED BY TM KF Front Spool Joints (2) REPLACED BY TM507212A KF2201 1S Steel Front Spool Joints (2) REPLACED BY TM KF2201S Front Spool Set with Steel Outdrives REPLACED BY TM KF Front Anti Roll Bar 1.2mm (2) REPLACED BY TM KF Front Anti Roll Bar 1.3mm (2) REPLACED BY TM KF Front Anti Roll Bar 1.4mm (2) REPLACED BY TM KF Front Anti Roll Bar 1.5mm (2) REPLACED BY TM KF Front Anti Roll Bar 1.6mm (2) REPLACED BY TM KF Rear Anti Roll Bar 1.2mm (2) REPLACED BY TM KF Rear Anti Roll Bar 1.3mm (2) REPLACED BY TM KF Rear Anti Roll Bar 1.4mm (2) REPLACED BY TM KF Rear Anti Roll Bar 1.5mm (2) KF Rear Anti Roll Bar 1.6mm (2) KF2204 Carbon Fiber Motor Guard REPLACED BY TM KF2205 Carbon Fiber Upper Bumper Mount REPLACED BY TM KF2206 Belt Tensioner Set REPLACED BY TM KF2207 Aluminum 7075 Steering Block (Left) REPLACED BY TM KF2208 Aluminum 7075 Steering Block (Right) REPLACED BY TM KF2209 Aluminum 7075 Rear Hub Carrier (1) REPLACED BY TM KF2210 Aluminum 7075 Drive Shaft (2) REPLACED BY TM KF2211 Aluminum 7075 Caster Block Left ( 0 Degree) REPLACED BY TM KF2212 Aluminum 7075 Caster Block Left ( 2 Degree) REPLACED BY TM KF2213 Aluminum 7075 Caster Block Left ( 6 Degree) REPLACED BY TM KF2214 Aluminum 7075 Caster Block Right ( 0 Degree) REPLACED BY TM KF2215 Aluminum 7075 Caster Block Right ( 2 Degree) REPLACED BY TM KF2216 Aluminum 7075 Caster Block Right ( 6 Degree) REPLACED BY TM KF2217 Aluminum 7075 Lower Spring Mount (4) REPLACED BY TM507328BK KF2218 ST Steel Diff. Joint (2) KF2219 Universal Driveshaft Nunchaku Type (2) REPLACED BY TM KF Driveshafts only for KF2219 (2) REPLACED BY TM KF Joints for KF2219 (2) REPLACED BY TM KF Wheel Axles for KF2219 (2) REPLACED BY TM KF Joint Hinge Pins for KF2219 (4) REPLACED BY TM KF G Clips for KF2219 (4) REPLACED BY TM KF Universal Driveshaft Plastic Pin Cover (8) REPLACED BY TM KF x8.5mm pin for KF2219 (4) REPLACED BY TM KF Ball Bearings metric 5x10x3mm (2) REPLACED BY TM KF2220 Piston 1 Hole of 1.2mm (4) OPTION OPTION OPTION OPTION OPTION OPTION
2 KF2221 Piston 3 Holes of 1.2mm (4) OPTION OPTION OPTION OPTION OPTION OPTION KF2222 Piston 4 Holes of 1.2mm (4) OPTION OPTION OPTION OPTION OPTION OPTION KF2224 Chassis Protector KF2225 Aluminum 7075 Battery Mount REPLACED BY TM KF2226 Carbon Fiber Front Body Holder REPLACED BY TM KF2227 Carbon Fiber Rear Body Holder REPLACED BY TM KF2228 Aluminum 7075 Front Anti Roll Bar Mount REPLACED BY TM KF2229 Aluminum 7075 Rear Anti Roll Bar Mount REPLACED BY TM KF2230 Carbon Fiber HP Upper Deck KF2231 Aluminum 7075 Front Arm Holder REPLACED BY TM KF2232 Aluminum 7075 Rear Arm Holder REPLACED BY TM KF2233 Carbon Fiber 2.3mm Upper Deck KF2234 Carbon Fiber 2.5mm Upper Deck KF2235 Carbon Fiber 2.5mm Chassis KF2236 Carbon Fiber 3.0mm Chassis KF Aluminum 7075 Clamp Type Hex Wheel Hub 0.75mm (4) REPLACED BY TM KF Aluminum 7075 Clamp Type Hex Wheel Hub +0.75mm (4) REPLACED BY TM KF Aluminum 7075 Clamp Type Hex Wheel Hub +1.50mm (4) REPLACED BY TM KF2238 Aluminum T 7075 Pulley REPLACED BY TM KF2239 Aluminum deg Rear Hub Carrier Left (1pc) REPLACED BY TM KF2240 Aluminum deg Rear Hub Carrier Left (1pc) REPLACED BY TM KF2241 Aluminum deg Rear Hub Carrier Right (1pc) REPLACED BY TM KF2242 Aluminum deg Rear Hub Carrier Right (1pc) REPLACED BY TM KF2243 Floating Steering Servo Mount KF Shocks Springs 13x23.5mm #24 OPTION OPTION OPTION OPTION OPTION OPTION KF Shocks Springs 13x23.5mm #25 ORIGINAL ORIGINAL OPTION OPTION ORIGINAL ORIGINAL KF Shocks Springs 13x23.5mm #26 OPTION OPTION OPTION OPTION OPTION OPTION KF Shocks Springs 13x23.5mm #27 ORIGINAL ORIGINAL OPTION OPTION ORIGINAL ORIGINAL KF Shocks Springs 13x23.5mm #28 OPTION OPTION OPTION OPTION OPTION OPTION KF Shocks Springs 13x23.5mm #29 OPTION OPTION OPTION OPTION OPTION OPTION KF Shocks Springs 13x23.5mm #30 OPTION OPTION OPTION OPTION OPTION OPTION KF4902 Shocks Springs Set 13x23.5mm (#21~#30) OPTION OPTION OPTION OPTION OPTION OPTION TM111007ST Nuts M3 nyloc Steel (10) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM111145BK Antenna Mount Aluminium Black with Antenna Tube OPTION ORIGINAL OPTION OPTION OPTION OPTION TM Nuts M4 nyloc flanged Special Wheels (4) OPTION OPTION ORIGINAL ORIGINAL OPTION OPTION TM111160BK Nuts M4 nyloc flanged Special Wheels Black (4) OPTION ORIGINAL OPTION OPTION ORIGINAL ORIGINAL TM Nuts M3 flanged (10) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM x12 mm Ball Stud (6) NO NO ORIGINAL ORIGINAL NO NO TM mm Socket Steel Ball Long (6) ORIGINAL ORIGINAL NEED TM / TM NEED TM / TM ORIGINAL ORIGINAL TM mm Socket Steel Ball Short (6) ORIGINAL ORIGINAL NEED TM / TM NEED TM / TM ORIGINAL ORIGINAL TM116132AS Adjustable Rod Aluminium 3.5mm Wrench 3x 20mm (2) OPTION OPTION OPTION NO ORIGINAL ORIGINAL TM116132BK Adjustable Rod 3x 20mm Black (2) ORIGINAL NO NO NO NO NO TM116132GD Adjustable Rod GD 3x 20mm (2) OPTION ORIGINAL ORIGINAL ORIGINAL OPTION OPTION TM116132W Adjustable Rod Stainless Steel 3x 20mm (2) REPLACED BY TM116132GD TM116133AS Adjustable Rod Aluminium 3.5mm Wrench 3x 30mm (2) OPTION OPTION OPTION NO ORIGINAL ORIGINAL TM116133BK Adjustable Rod 3x 30mm Black (2) ORIGINAL NO NO NO NO NO TM116133GD Adjustable Rod GD 3x 30mm (2) OPTION ORIGINAL ORIGINAL ORIGINAL OPTION OPTION
3 TM116133W Adjustable Rod Stainless Steel 3x 30mm (2) REPLACED BY TM116133GD TM116134AS Adjustable Rod Aluminium 3.5mm Wrench 3x 40mm (2) OPTION OPTION OPTION NO ORIGINAL ORIGINAL TM116134BK Adjustable Rod 3x 40mm Black (2) ORIGINAL NO NO NO NO NO TM116134GD Adjustable Rod GD 3x 40mm (2) OPTION ORIGINAL ORIGINAL ORIGINAL OPTION OPTION TM116134W Adjustable Rod Stainless Steel 3x 40mm (2) REPLACED BY TM116134GD TM E clip 5 (10) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Washer 3x6.5x1mm Aluminium (6) ORIGINAL ORIGINAL OPTION OPTION ORIGINAL ORIGINAL TM Washers 3 x 6.5 x 2mm (6) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Washers 3.1x4.8x0.5mm (10) ORIGINAL ORIGINAL OPTION OPTION ORIGINAL OPTION TM E clip 2.0 (10) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Pin 2X9.0 (10) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Pin 2x12.8mm (10) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Pin 1.5x6.8mm (10) ORIGINAL NO NO NO NO NO TM Pin 2x9.8mm (10) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM EVA Tape 3x14cm OPTION ORIGINAL OPTION NO OPTION OPTION TM Pin 2x7.8mm (10) NO NO ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Screws Flat Head Self Tapping Allen 3 x 8mm (6) NO NO ORIGINAL ORIGINAL NO NO TM116308BU Screws Button Head Self Tapping Allen 3 x 8mm (6) NO NO ORIGINAL ORIGINAL NO NO TM Screws Flat Head Self Tapping Allen 3 x 10mm (6) NO NO ORIGINAL ORIGINAL NO NO TM116310BU Screws Button Head Self Tapping Allen 3 x 10mm (6) NO NO NO ORIGINAL NO NO TM116314BU Screws Button Head Self Tapping Allen 3 x 14mm (6) NO NO ORIGINAL ORIGINAL NO NO TM126204BU Screws Button Head Allen M2 x 4mm (6) ORIGINAL ORIGINAL OPTION OPTION ORIGINAL ORIGINAL TM126206C Screws Cap Head Allen M2 x 6mm (6) ORIGINAL ORIGINAL OPTION OPTION ORIGINAL ORIGINAL TM Screws Flat Head Allen M2.6 x 8mm (6) ORIGINAL NO NO NO NO NO TM126210BU Screws Button Head Allen M2 x 10mm (10) ORIGINAL NO NO ORIGINAL NO NO TM126212BU Screws Button Head M2 x 12mm (10) ORIGINAL ORIGINAL ORIGINAL OPTION ORIGINAL ORIGINAL TM126302S Grub Screws M3 x 2mm (6) ORIGINAL ORIGINAL NO NO NO NO TM126303S Grub Screws M3 x 3mm (6) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM126304BU Screws Button Head Allen M3 x 4mm (10) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM126304S Grub Screws M3 x 4mm (6) ORIGINAL ORIGINAL OPTION OPTION ORIGINAL ORIGINAL TM Screws Flat Head Allen M3 x 5mm (6) OPTION OPTION ORIGINAL NO ORIGINAL ORIGINAL TM126305BU Screws Button Head Allen M3 x 5mm (6) ORIGINAL ORIGINAL OPTION OPTION ORIGINAL ORIGINAL TM Screws Flat Head Allen M3 x 6mm (6) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM126306BU Screws Button Head Allen M3 x 6mm (6) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Screws Flat Head Allen M3 x 7mm (6) NO NO NO NO ORIGINAL ORIGINAL TM Screws Flat Head Allen M3 x 8mm (6) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM126308BU Screws Button Head Allen M3 x 8mm (6) ORIGINAL ORIGINAL ORIGINAL NEED ALU BULKHEADS ORIGINAL ORIGINAL TM126308S Grub Screws M3 x 8mm (10) ORIGINAL ORIGINAL OPTION OPTION ORIGINAL ORIGINAL TM126308SE Screws Flat Head M3 x 8mm Servo Mount (6) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Screws Flat Head Allen M3 x 10mm (6) ORIGINAL ORIGINAL OPTION OPTION ORIGINAL ORIGINAL TM126310BU Screws Button Head Allen M3 x 10mm (6) ORIGINAL ORIGINAL OPTION OPTION ORIGINAL ORIGINAL TM126310S Grub Screws M3 x 10mm (6) ORIGINAL ORIGINAL OPTION OPTION ORIGINAL ORIGINAL TM126312BU Screws Button Head Allen M3 x 12mm (6) NO NO NO NO ORIGINAL ORIGINAL TM126312C Screws Cap Head Allen M3 x 12mm (6) ORIGINAL ORIGINAL OPTION OPTION ORIGINAL ORIGINAL TM126314BU Screws Button Head Allen M3 x 14mm (6) ORIGINAL ORIGINAL NEED ALU BULKHEADS NEED ALU BULKHEADS NO NO TM126316BU Screws Button Head Allen M3 x 16mm (10) ORIGINAL ORIGINAL NEED ALU BULKHEADS NEED ALU BULKHEADS NO NO TM126405S Grub Screws M4 x 5mm (6) OPTION OPTION NO NO ORIGINAL ORIGINAL
4 TM126408S Grub Screws M4 x 8mm (6) ORIGINAL ORIGINAL ORIGINAL ORIGINAL OPTION OPTION TM Washers 4.2 x 10 x 0.2mm (6) ORIGINAL ORIGINAL OPTION OPTION NO NO TM Washers 2.6 x 6 x 0.5mm (10) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Washers Aluminium 3 x 6 x 1mm (10) ORIGINAL ORIGINAL OPTION OPTION ORIGINAL ORIGINAL TM130114S Washers Steel 3 x 6 x 1mm (10) NO NO ORIGINAL ORIGINAL NO NO TM Washers 3x6x0.5mm (10) OPTION OPTION OPTION OPTION OPTION OPTION TM Washers 2.6 x 8 x 0.1mm (10) ORIGINAL NO NO NO NO NO TM Washers 3 x 7.5 x 1mm (10) ORIGINAL ORIGINAL ORIGINAL ORIGINAL NO NO TM Washers 3 x 6 x 4mm (6) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Washers 5.2 x 12 x 0.2 (10) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Washers 2.6 x 6 x 0.3mm (10) OPTION OPTION OPTION OPTION ORIGINAL ORIGINAL TM Washers 3.1 x 6 x 0.1mm (10) NO NO ORIGINAL ORIGINAL OPTION OPTION TM Washers 3 x 5 x 0.75mm (10) OPTION OPTION NO NO ORIGINAL OPTION TM Washers 3.1 x 6 x 0.1mm (10) NO OPTION OPTION OPTION ORIGINAL ORIGINAL TM150306F Ball Bearings metric 3x 6x2.5mm Flanged (2) NEED TM507311BK NEED TM507311BK NO NO ORIGINAL ORIGINAL TM150306ST Ball Bearings metric 3x 6x2.5mm (4) ORIGINAL ORIGINAL ORIGINAL ORIGINAL NO NO TM150407ST Ball Bearings metric 4x 7x2.5mm (4) ORIGINAL NEED ALU CASTER BLOCKS NEED ALU CASTER BLOCKS NEED ALU CASTER BLOCKS NEED ALU CASTER BLOCKS NO TM Ball Bearings metric 5x 8x2.5mm (2) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM150508ST Ball Bearings metric 5x 8x2.5mm (4) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM150510ST Ball Bearings metric 5x10x4mm (4) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM151015ST Ball Bearings metric 10x15x4mm (4) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM O Ring 11.2x1.7mm (10) ORIGINAL ORIGINAL NEED TM / TM NEED TM / TM ORIGINAL ORIGINAL TM O Ring 4.7x1.4mm (10) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM O Ring P3 (10) NO NO ORIGINAL ORIGINAL NO NO TM O Ring 3.8x1.9mm (10) ORIGINAL NO NEED TM NEED TM NO NO TM Electric Motor Stock 22 turns Thor 540 NO NO NO ORIGINAL / BRUSHED NO NO TM ESC Thor WP 1040 Waterproof 100A Limit 18T NO NO NO ORIGINAL / BRUSHED NO NO TM Servo THOR WP 3003 Waterproof NO NO NO ORIGINAL NO NO TM503117A Aluminum x4mm Ball Stud (6) OPTION OPTION OPTION OPTION OPTION OPTION TM503117BK 5x4mm Ball Stud Black (6) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Short Ball Cup (6) ORIGINAL NO NEED TM NEED TM ORIGINAL ORIGINAL TM Aluminium Anti Roll Bar Ball (4) ORIGINAL ORIGINAL OPTION OPTION ORIGINAL ORIGINAL TM503127A Aluminum 7075 Steering Block Ball Stud (4) OPTION OPTION OPTION OPTION OPTION OPTION TM503127BK Steering Block 5x10mm Ball Stud Black (4) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM503138A Aluminum x7mm Ball Stud (6) OPTION OPTION OPTION OPTION OPTION OPTION TM503138BK 5x7mm Ball Stud Black (6) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Caster Block Ball Cup (4) ORIGINAL ORIGINAL ORIGINAL OPTION NO NO TM Long Ball Cup (6) ORIGINAL OPTION OPTION ORIGINAL NO NO TM Shock Spring Mount & Ball Cup (4) NO NO ORIGINAL ORIGINAL NO NO TM503186F Servo Saver 25T Futaba / HRC / Savöx / Power HD / Orion / Ace OPTION OPTION OPTION OPTION OPTION OPTION TM503186H Servo Saver 24T Hitec OPTION OPTION OPTION OPTION OPTION OPTION TM503186K Servo Saver 23T Sanwa / Ko Propo / JR OPTION OPTION OPTION OPTION OPTION OPTION TM Special Servo Ball Cup (2) REPLACED BY TM TM Servo Mount NO NO ORIGINAL ORIGINAL NO NO TM Carbon Fiber Chassis 2.3mm ORIGINAL NO OPTION OPTION NO NO TM Aluminium Rear Left Bulkhead ORIGINAL ORIGINAL OPTION OPTION NO NO TM Aluminium Rear Right Bulkhead ORIGINAL ORIGINAL OPTION OPTION NO NO
5 TM Aluminium Front Bulkhead ORIGINAL ORIGINAL OPTION OPTION NO NO TM Aluminium Main Shaft Right Bulkhead ORIGINAL NO NO NO NO NO TM Aluminium Motor Bulkhead ORIGINAL NO NO NO NO NO TM Aluminium Motor Bulkhead Support ORIGINAL NO NO NO NO NO TM Aluminium Steering Post (2) ORIGINAL ORIGINAL ORIGINAL ORIGINAL NO NO TM Aluminium Spur Gear Holder ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM T Pulley (2) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Aluminium Diff. Joint (2) ORIGINAL NO NO NO NO NO TM Differential Case ORIGINAL NO NO NO NO NO TM Bevel Gear Set (4) ORIGINAL NO NO NO NO NO TM Differential Case Gasket (4) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Differential Case O ring (4) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Belt Tension Adjuster (4) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Gear Differential Set REPLACED BY TM TM Aluminium Bearing Holder (2) ORIGINAL NO NO NO NO NO TM Long Belt ORIGINAL ORIGINAL ORIGINAL ORIGINAL OPTION OPTION TM Short Belt ORIGINAL ORIGINAL ORIGINAL ORIGINAL OPTION OPTION TM Carbon Fiber Front Shock Tower ORIGINAL NO OPTION OPTION NO NO TM Alumium Front Bulkhead Upper Mount REPLACED BY TM TM Rear Body Support (2) REPLACED BY TM TM Carbon Fiber Rear Shock Tower ORIGINAL NO OPTION OPTION NO NO TM Alumium Rear Bulkhead Upper Mount REPLACED BY TM TM Aluminium Dual Steering Arm Set ORIGINAL ORIGINAL OPTION OPTION OPTION OPTION TM Front Suspension Arm (2) REPLACED BY TM507127H TM507127H Front Suspension Arm HARD (2) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL OPTION TM Front Suspension Pin (2) ORIGINAL ORIGINAL ORIGINAL ORIGINAL NO NO TM Suspension Arm Holder (2) ORIGINAL ORIGINAL OPTION OPTION NO NO TM Front Anti roll Bar Rod (2) ORIGINAL ORIGINAL OPTION OPTION ORIGINAL NO TM Aluminium Bushing For Susp. Arm Holder (2) ORIGINAL ORIGINAL OPTION OPTION NO NO TM Rear Suspension Arm (2) REPLACED BY TM507235H TM507132H Rear Suspension Arm HARD (2) REPLACED BY TM507235H TM Rear Suspension Pin (2) ORIGINAL ORIGINAL ORIGINAL ORIGINAL NO NO TM Aluminium Caster Block Left (4 degree) ORIGINAL NEED TM150407ST NEED TM150407ST NEED TM150407ST NEED TM150407ST NEED TM150407ST TM Aluminium Caster Block Right (4 degree) ORIGINAL NEED TM150407ST NEED TM150407ST NEED TM150407ST NEED TM150407ST NEED TM150407ST TM Bushing For Caster Block (2+2) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Universal Driveshaft (2) REPLACED BY TM TM Steel Drive Shaft Only (2) ORIGINAL ORIGINAL NO NO NO NO TM Steel Universal Joint Outdriver (2) ORIGINAL ORIGINAL NO NO NO NO TM Pivot for (2) ORIGINAL ORIGINAL NO NO NO NO TM Universal Driveshaft Plastic Pin Cover (8) ORIGINAL ORIGINAL NO NO ORIGINAL ORIGINAL TM Steering Block HARD (2) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL NO TM Aluminium Wheel Adapter (4) REPLACED BY TM507140BK TM507140BK Aluminium Wheel Adapter Black (4) OPTION OPTION OPTION OPTION ORIGINAL ORIGINAL TM Caster Block Pin (2) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Rear Hub Carrier HARD (2) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Rear Hub Carrier Pin (2) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Front Anti Roll Bar 1.4mm (2) REPLACED BY TM507220
6 TM Anti Roll Bar Holder (4) REPLACED BY TM TM Rear Anti Roll Bar 1.2mm (2) REPLACED BY TM TM Servo Arm (Futaba) (2) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Servo Arm (Ko,Sanwa) (2) ORIGINAL ORIGINAL ORIGINAL OPTION ORIGINAL ORIGINAL TM Aluminium Servo Mount (2) ORIGINAL NO OPTION OPTION NO NO TM Carbon Fiber Upper Plate 2.0mm ORIGINAL NO NO NO NO NO TM Upper Plate Post (2) ORIGINAL ORIGINAL OPTION OPTION NO NO TM Quick Release Battery Strap ORIGINAL ORIGINAL ORIGINAL NEED TM ORIGINAL ORIGINAL TM Battery Holder Set ORIGINAL NO OPTION OPTION NO NO TM Shock Set (2) ORIGINAL NO OPTION OPTION NO NO TM Shock Piston 2 Holes (4) ORIGINAL NO NEED TM NEED TM NO NO TM Shock Shaft (2) ORIGINAL NO NEED TM NEED TM NO NO TM Shock Body Set (2) ORIGINAL NO NEED TM NEED TM NO NO TM Shock Small O ring Set (4) ORIGINAL NO NEED TM NEED TM NO NO TM Shock Hump Washer Black (4) ORIGINAL ORIGINAL NEED TM NEED TM NO NO TM Shock Spring Cup and Ballcup ORIGINAL NO NEED TM NEED TM NO NO TM Shock Pivot (4) ORIGINAL NO NEED TM NEED TM NO NO TM Shock Membrane (4) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Front Body Support (2) ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Foam Bumper ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Bumper Mount Set ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Stickers E4RS II ORIGINAL NO NO NO NO NO TM Carbon Fiber Chassis 2.3mm NO ORIGINAL NEED TM NEED TM NO NO TM Aluminum 7075 Motor Mount Plate NO ORIGINAL NEED TM NEED TM ORIGINAL OPTION TM507202BK Aluminum 7075 Motor Mount Plate Black NO OPTION NEED TM NEED TM OPTION ORIGINAL TM Aluminum 7075 Motor Mount Support NO ORIGINAL OPTION NEED TM OPTION OPTION TM Aluminum 7075 Main Shaft Right Mount REPLACED BY TM507204H TM507204H Aluminum 7075 Main Shaft Right Mount (+0.8mm) NO ORIGINAL NEED TM507205H NEED TM507205H NO NO TM Aluminum 7075 Main Shaft Left Mount REPLACED BY TM507205H TM507205H Aluminum 7075 Main Shaft Left Mount (+0.8mm) NO ORIGINAL NEED TM507204H NEED TM507204H NO NO TM Light Weight Bevel Gear Set (4) NEED TM ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Light Weight Differential Case NEED TM ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Light Weight Aluminum 7075 Differential Joint (2) NEED TM ORIGINAL NO NO ORIGINAL ORIGINAL TM Light Weight Gear Differential Set OPTION ORIGINAL NO NO ORIGINAL ORIGINAL TM Front Spool 38T Pulley NEED TM ORIGINAL NEED TM NEED TM ORIGINAL ORIGINAL TM Front Spool Pulley Holder NEED TM ORIGINAL NEED TM NEED TM ORIGINAL ORIGINAL TM Front Spool ST Steel Joints (2) NEED TM ORIGINAL NO NO ORIGINAL ORIGINAL TM507212A Front Spool Aluminum 7075 Joints (2) NEED TM OPTION NO NO OPTION OPTION TM Front Spool Set OPTION ORIGINAL NO NO ORIGINAL ORIGINAL TM Carbon Fiber Low CG Front 3mm Shock Tower NO ORIGINAL NEED TM NEED TM OPTION OPTION TM Aluminum 7075 Bulkhead Upper Mount OPTION ORIGINAL OPTION OPTION NO NO TM Carbon Fiber Low CG Rear 3mm Shock Tower NO ORIGINAL NEED TM NEED TM OPTION OPTION TM Rear Body Support (2) OPTION ORIGINAL ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Body Mount Extension (2) NO NO OPTION ORIGINAL NO NO TM Anti Roll Bar Ball Cup (4) NO ORIGINAL NEED TM NEED TM ORIGINAL ORIGINAL TM Caster Block 4 HARD (2) OPTION ORIGINAL ORIGINAL ORIGINAL ORIGINAL NO TM Front Anti Roll Bar 1.4mm (1) OPTION ORIGINAL NEED TM NEED TM OPTION OPTION
7 TM Anti Roll Bar Holder (4) OPTION ORIGINAL NEED TM / TM NEED TM / TM NO NO TM Rear Anti Roll Bar 1.2mm (1) OPTION ORIGINAL NEED TM NEED TM ORIGINAL ORIGINAL TM Aluminum 7075 One Piece Servo Mount NO ORIGINAL NEED TM NEED TM ORIGINAL OPTION TM Carbon Fiber Upper Plate 2.0mm NO ORIGINAL OPTION OPTION NO NO TM Battery Holder Set OPTION ORIGINAL NO NO NO NO TM Low CG Shock Absorber Set (2) NO ORIGINAL NEED TM / TM NEED TM / TM NO NO TM Shock Piston 3 Holes of 1.1mm (4) OPTION ORIGINAL NEED TM / TM NEED TM / TM ORIGINAL ORIGINAL TM Low CG Shock Shaft (2) NO ORIGINAL NEED TM / TM NEED TM / TM ORIGINAL ORIGINAL TM Low CG Shock Body Set (2) NO ORIGINAL NEED TM NEED TM NO NO TM Low CG Shock Lower Cap (2) NO ORIGINAL NEED TM NEED TM NO NO TM Low CG Shock Upper Cap (2) NO ORIGINAL NEED TM NEED TM NO NO TM Low CG Shock Small O ring Set (4) NO ORIGINAL NEED TM NEED TM NO NO TM Low CG Shock Ball End & Nylon Set (4) NO ORIGINAL NEED TM / TM NEED TM / TM ORIGINAL ORIGINAL TM Universal Driveshaft Nunchaku Type (2) OPTION ORIGINAL NO NO ORIGINAL ORIGINAL TM Driveshafts Only for Nunchaku (2) NEED TM ORIGINAL NO NO ORIGINAL ORIGINAL TM Joint for Nunchaku Driveshafts (2) NEED TM ORIGINAL NEED TM NEED TM ORIGINAL ORIGINAL TM Wheel Axel for Nunchaku Driveshafts (2) NEED TM ORIGINAL NEED TM NEED TM ORIGINAL ORIGINAL TM Joint Hing Pin for Nunchaku Driveshafts (4) NEED TM ORIGINAL NEED TM NEED TM ORIGINAL ORIGINAL TM G Clip for Nunchaku Driveshafts (4) NEED TM ORIGINAL NEED TM NEED TM ORIGINAL ORIGINAL TM x8.5mm Pin for Nunchaku Driveshafts (4) NEED TM ORIGINAL NEED TM NEED TM ORIGINAL ORIGINAL TM x10x3mm Ball Bearings for Nunchaku (2) NEED TM ORIGINAL NEED TM NEED TM ORIGINAL ORIGINAL TM507235H Rear Suspension Arms HARD (2) OPTION ORIGINAL ORIGINAL ORIGINAL OPTION OPTION TM Stickers E4RS II EVO NO ORIGINAL NO NO NO NO TM D Flex System NO OPTION OPTION OPTION NO NO TM Middle Flex Post NO OPTION OPTION OPTION NO NO TM Carbon Fiber Upper Plate 2.3mm TM Carbon Fiber Upper Plate 2.5mm TM Carbon Fiber Chassis 2.5mm TM Carbon Fiber Chassis 3.0mm TM Front Anti Roll Bar 1.2mm OPTION OPTION OPTION OPTION OPTION OPTION TM Front Anti Roll Bar 1.3mm OPTION OPTION OPTION OPTION ORIGINAL ORIGINAL TM Front Anti Roll Bar 1.5mm OPTION OPTION OPTION OPTION OPTION OPTION TM Front Anti Roll Bar 1.6mm OPTION OPTION OPTION OPTION OPTION OPTION TM Rear Anti Roll Bar 1.1mm OPTION OPTION OPTION OPTION OPTION OPTION TM Rear Anti Roll Bar 1.3mm OPTION OPTION OPTION OPTION OPTION OPTION TM Rear Anti Roll Bar 1.4mm OPTION OPTION OPTION OPTION OPTION OPTION TM Carbon Fiber Motor Guard OPTION OPTION OPTION OPTION OPTION OPTION TM Carbon Fiber Upper Bumper Mount OPTION OPTION OPTION OPTION OPTION OPTION TM Belt Tensioner Set OPTION OPTION OPTION OPTION OPTION OPTION TM Aluminum 7075 Steering Block (Left) OPTION OPTION OPTION OPTION OPTION OPTION TM Carbon part for Aluminium Steering Block OPTION OPTION OPTION OPTION OPTION OPTION TM Aluminum 7075 Steering Block (Right) OPTION OPTION OPTION OPTION OPTION OPTION TM Aluminum 7075 Rear Hub Carrier (1) OPTION OPTION OPTION OPTION OPTION OPTION TM Aluminum 7075 Drive Shaft (2) OPTION OPTION NEED TM NEED TM NO NO TM Aluminum 7075 Caster Block Left (0 Degree) OPTION NEED TM150407ST NEED TM150407ST NEED TM150407ST NEED TM150407ST NEED TM150407ST TM Aluminum 7075 Caster Block Left (2 Degree) OPTION NEED TM150407ST NEED TM150407ST NEED TM150407ST NEED TM150407ST NEED TM150407ST TM Aluminum 7075 Caster Block Left (6 Degree) OPTION NEED TM150407ST NEED TM150407ST NEED TM150407ST NEED TM150407ST NEED TM150407ST
8 TM Aluminum 7075 Caster Block Right (0 Degree) OPTION NEED TM150407ST NEED TM150407ST NEED TM150407ST NEED TM150407ST NEED TM150407ST TM Aluminum 7075 Caster Block Right (2 Degree) OPTION NEED TM150407ST NEED TM150407ST NEED TM150407ST NEED TM150407ST NEED TM150407ST TM Aluminum 7075 Caster Block Right (6 Degree) OPTION NEED TM150407ST NEED TM150407ST NEED TM150407ST NEED TM150407ST NEED TM150407ST TM Aluminum 7075 Lower Spring Mount (4) OPTION OPTION NEED TM / TM NEED TM / TM NO NO TM Aluminum 7075 Battery Mount OPTION OPTION OPTION NO NO NO TM Carbon Fiber Front Body Holder OPTION OPTION OPTION OPTION OPTION OPTION TM Carbon Fiber Rear Body Holder OPTION OPTION OPTION OPTION OPTION OPTION TM Aluminum 7075 Front Anti Roll Bar Mount OPTION OPTION NEED TM NEED TM NO NO TM Aluminum 7075 Rear Anti Roll Bar Mount OPTION OPTION NEED TM NEED TM NO NO TM Aluminum 7075 Front Arm Holder OPTION OPTION NEED ALU BULKHEADS NEED ALU BULKHEADS NO NO TM Aluminum 7075 Rear Arm Holder OPTION OPTION NEED ALU BULKHEADS NEED ALU BULKHEADS NO NO TM Aluminum 7075 Clamp Type Hex Wheel Hub 0.75mm (4) OPTION OPTION OPTION OPTION OPTION OPTION TM Aluminum 7075 Clamp Type Hex Wheel Hub +0.75mm (4) OPTION OPTION OPTION OPTION OPTION OPTION TM Aluminum 7075 Clamp Type Hex Wheel Hub +1.50mm (4) OPTION OPTION OPTION OPTION OPTION OPTION TM Aluminum T Pulley OPTION OPTION OPTION OPTION OPTION OPTION TM Aluminum deg Rear Hub Carrier Left (1pc) OPTION OPTION OPTION OPTION OPTION OPTION TM Aluminum deg Rear Hub Carrier Left (1pc) OPTION OPTION OPTION OPTION OPTION OPTION TM Aluminum deg Rear Hub Carrier Right (1pc) OPTION OPTION OPTION OPTION OPTION OPTION TM Aluminum deg Rear Hub Carrier Right (1pc) OPTION OPTION OPTION OPTION OPTION OPTION TM Metal Bevel Gear Set (4+2) NEED TM OPTION OPTION OPTION OPTION OPTION TM Chassis 2.3mm NO NO NO NO ORIGINAL NO TM507302BK Aluminum 7075 Front Right / Rear Left Bulkhead NO NO NO NO ORIGINAL ORIGINAL TM507303BK Aluminum 7075 Front Left / Rear Right Bulkhead NO NO NO NO ORIGINAL ORIGINAL TM Aluminum 7075 Center Battery Guides NO OPTION NO NO ORIGINAL ORIGINAL TM507305BK Aluminum 7075 Steering Mount NO NO NO NO ORIGINAL ORIGINAL TM Low Friction Rear Belt OPTION OPTION OPTION OPTION ORIGINAL ORIGINAL TM507306PU PU Reinforced Rear Belt OPTION OPTION OPTION OPTION OPTION OPTION TM Low Friction Front Belt OPTION OPTION OPTION OPTION ORIGINAL ORIGINAL TM507307PU PU Reinforced Front Belt OPTION OPTION OPTION OPTION OPTION OPTION TM507308BK Aluminum 7075 Bulkhead Upper Mount NO OPTION NO NO ORIGINAL OPTION TM Low CG Front Shock Tower 4mm NO OPTION NO NO ORIGINAL ORIGINAL TM Low CG Rear Shock Tower 4mm NO OPTION NO NO ORIGINAL ORIGINAL TM507311BK Aluminum 7075 Steering Plate NEED TM150306F NEED TM150306F NEED TM150306F NEED TM150306F ORIGINAL ORIGINAL TM Ball Cups OPTION OPTION OPTION NO ORIGINAL ORIGINAL TM Front Suspension Axle (2) NO NO NO NO ORIGINAL NO TM507314BK Aluminum 7075 FF/RR Suspension Mount #2 NO NO NO NO ORIGINAL ORIGINAL TM Suspension Mount Inserts Set (0, 0.2, 0,4) Black NO NO NO NO ORIGINAL OPTION TM507315O Suspension Mount Inserts Set (0, 0.2, 0,4) Orange NO NO NO NO OPTION ORIGINAL TM Hinge Pin Ball (POM) (4) NO NO NO NO ORIGINAL OPTION TM507316A Aluminum 7075 Hinge Pin Ball (4) NO NO NO NO OPTION ORIGINAL TM507317BK Aluminum 7075 RF/FR Suspension Mount #2 NO NO NO NO ORIGINAL ORIGINAL TM Rear Suspension Axle (2) NO NO NO NO ORIGINAL ORIGINAL TM507319H Rear Suspension Arm HARD (2) OPTION OPTION OPTION OPTION ORIGINAL OPTION TM Steel CVD Driveshaft (2) OPTION OPTION NO NO ORIGINAL NO TM Steel Drive Shaft Only (2) NEED TM NEED TM NO NO ORIGINAL NO TM Joint Hinge Pin for CVD Driveshafts (4) NEED TM NEED TM NO NO ORIGINAL ORIGINAL TM G Clip for CVD Driveshafts (4) NEED TM NEED TM NO NO ORIGINAL ORIGINAL
9 TM Steel CVD Driveshaft Wheel Axle (2) NEED TM NEED TM NO NO ORIGINAL ORIGINAL TM Aluminum 7075 Anti Roll Bar Retainers (2) NO NO NO NO ORIGINAL ORIGINAL TM Servo Ball Cup (2) OPTION OPTION OPTION OPTION ORIGINAL ORIGINAL TM Upper Deck 2.0mm NO NO NO NO ORIGINAL ORIGINAL TM Battery Holder Set NO NO NO NO ORIGINAL ORIGINAL TM Steering Arm Set OPTION OPTION OPTION OPTION ORIGINAL ORIGINAL TM Aluminum Steering Post (2) NO NO NO NO ORIGINAL ORIGINAL TM Low CG Teflon Coated Shock Absorber Set (2) NO OPTION NO NO ORIGINAL ORIGINAL TM Low CG Shock Upper Cap (2) NO NEED TM NO NO ORIGINAL ORIGINAL TM Low CG Teflon Coated Shock Body Set (2) NO NEED TM NO NO ORIGINAL ORIGINAL TM Low CG Shock O rings and Teflon Guides Set (4) NO NEED TM NO NO ORIGINAL ORIGINAL TM Low CG Shock Lower Cap (2) NO NEED TM NO NO ORIGINAL ORIGINAL TM507328BK Aluminum 7075 Lowered Lower Springs cups (4) OPTION OPTION NEED TM NEED TM ORIGINAL ORIGINAL TM507329BK Aluminum 7075 Main Shaft Right Mount NO NO NO NO ORIGINAL ORIGINAL TM507330BK Aluminum 7075 Main Shaft Left Mount NO NO NO NO ORIGINAL ORIGINAL TM Aluminum 7075 Motor Mount Support NO OPTION OPTION NO ORIGINAL OPTION TM507331BK Aluminum 7075 Motor Mount Support Black NO OPTION OPTION NO OPTION ORIGINAL TM Aluminum 7075 Front "Y" Seering Stiffener NO NO NO NO OPTION OPTION TM Aluminum 7075 Rear Flex Point Tube NO NO NO NO OPTION OPTION TM Carbon Upper Deck 2.3mm NO NO NO NO OPTION OPTION TM Carbon Upper Deck 2.5mm NO NO NO NO OPTION OPTION TM Aluminum 7075 FF/RR Suspension Mount " 2" #1 NO NO NO NO OPTION OPTION TM Aluminum 7075 FF/RR Suspension Mount "+2" #3 NO NO NO NO OPTION OPTION TM Aluminum 7075 FR/RF Suspension Mount " 2" #1 NO NO NO NO OPTION OPTION TM Aluminum 7075 FR/RF Suspension Mount "+2" #3 NO NO NO NO OPTION OPTION TM Carbon Chassis 2.5mm NO NO NO NO OPTION NO TM Aluminum mm Chassis NO NO NO NO NEED TM OPTION TM Stickers E4RS III NO NO NO NO ORIGINAL NO TM Aluminum mm & 30mm One Piece Fan Mount NO NO NO NO OPTION OPTION TM507343L Aluminum mm One Piece Fan Mount NO NO NO NO OPTION OPTION TM Aluminum 7075 One Piece FR Suspension Mount " 2" #1 NO NO NO NO OPTION OPTION TM Aluminum 7075 One Piece FR Suspension Mount "0" #2 NO NO NO NO OPTION ORIGINAL TM Aluminum 7075 One Piece RF Suspension Mount " 2" #1 NO NO NO NO OPTION OPTION TM Aluminum 7075 One Piece RF Suspension Mount "0" #2 NO NO NO NO OPTION OPTION TM Suspension Mount Spacer Set 0.10mm (2pcs FF/RR and 4pcs FR/RF) NO NO NO NO OPTION OPTION TM Suspension Mount Spacer Set 0.25mm (2pcs FF/RR and 4pcs FR/RF) NO NO NO NO OPTION OPTION TM Suspension Mount Spacer Set 0.50mm (2pcs FF/RR and 4pcs FR/RF) NO NO NO NO OPTION OPTION TM Carbon Chassis 2.5mm NO NO NO NO NEED TM ORIGINAL TM Aluminum 7075 Bulkhead Upper Mount OPTION OPTION OPTION OPTION OPTION ORIGINAL TM Caster Block 4 HARD (2) OPTION OPTION OPTION OPTION OPTION ORIGINAL TM Steering Block HARD (2) OPTION OPTION OPTION OPTION OPTION ORIGINAL TM Lightweight Steel CVD Driveshaft (2) OPTION OPTION NO NO OPTION ORIGINAL TM Steel Driveshaft Only (2) NEED TM NEED TM NO NO NEED TM ORIGINAL TM Front Anti roll Bar Rod (2) OPTION OPTION NO NO OPTION ORIGINAL TM Front Suspension Axle (2) NO NO NO NO NEED TM ORIGINAL TM Aluminum 7075 One Piece Light Servo Mount NO OPTION NEED TM NEED TM OPTION ORIGINAL TM NEW Front Suspension Arm HARD (2) OPTION OPTION OPTION OPTION OPTION ORIGINAL
10 TM NEW Rear Suspension Arm HARD (2) OPTION OPTION OPTION OPTION OPTION ORIGINAL TM Chassis NO NO ORIGINAL OPTION NO NO TM Front Bulkhead (2) NO NO ORIGINAL ORIGINAL NO NO TM Rear Bulkhead (2) NO NO ORIGINAL ORIGINAL NO NO TM Spur Gear 48DP 80T NO NO ORIGINAL ORIGINAL NO NO TM Differential Set NO NO ORIGINAL ORIGINAL NO NO TM Differential Cup (2) NO NO ORIGINAL ORIGINAL NO NO TM Bulkhead Upper Mount NO NO ORIGINAL ORIGINAL NO NO TM Front Shock Tower NO NO ORIGINAL OPTION NO NO TM Rear Shock Tower NO NO ORIGINAL OPTION NO NO TM Middle Shaft Mount NO NO ORIGINAL ORIGINAL NO NO TM Motor Mount NO NO ORIGINAL OPTION NO NO TM Dual Steering Arm Set NO NO ORIGINAL ORIGINAL NO NO TM Hinge Pin Mount (2+2) NO NO ORIGINAL ORIGINAL NO NO TM Universal Driveshaft (2) NO NO ORIGINAL ORIGINAL NO NO TM Driveshaft only (2) NO NO ORIGINAL ORIGINAL NO NO TM G Clip for Universal Driveshaft (4) NO NO ORIGINAL ORIGINAL NO NO TM Universal Driveshaft Outdrive (2) NO NO ORIGINAL ORIGINAL NO NO TM Wheel Adapter (4) NO NO ORIGINAL ORIGINAL NO NO TM Upper Plate NO NO ORIGINAL ORIGINAL NO NO TM Battery Mount NO NO ORIGINAL NEED TM NO NO TM Front Shock Absorbers Set (2) NO NO ORIGINAL ORIGINAL NO NO TM Front Shock Absorber Spring (2) NO NO ORIGINAL ORIGINAL NO NO TM Shock Shaft and Piston Set (2) NO NO ORIGINAL ORIGINAL NO NO TM Shock Body Set (2) NO NO ORIGINAL ORIGINAL NO NO TM Shock O Ring and Washer (2) NO NO ORIGINAL ORIGINAL NO NO TM Shock Upper Cap (2) NO NO ORIGINAL ORIGINAL NO NO TM Rear Shock Absorbers Set (2) NO NO ORIGINAL ORIGINAL NO NO TM Rear Shock Absorber Spring (2) NO NO ORIGINAL ORIGINAL NO NO TM Antenna Rod Mount OPTION OPTION ORIGINAL ORIGINAL ORIGINAL ORIGINAL TM Universal Driveshaft Nunchaku Type / 3mm Pin (no blades) (2) NO NEED TM OPTION OPTION NEED TM NEED TM TM Driveshafts Only for Nunchaku with 3mm Pin (no blades) (2) NO NEED TM OPTION OPTION NEED TM NEED TM TM Front Anti roll Bar Set ORIGINAL ORIGINAL OPTION OPTION NO NO TM Rear Anti roll Bar Set ORIGINAL ORIGINAL OPTION OPTION NO NO TM Suspension Arm Holder With Aluminium Bushing ORIGINAL ORIGINAL OPTION OPTION NO NO TM Option Part Front Spool Set with 3mm Pin (no blades) NO NEED TM OPTION OPTION NEED TM NEED TM TM Spool Steel Joints with 3mm Pin (no blades) (2) NO NEED TM OPTION OPTION NEED TM NEED TM TM Chassis NO NO NO ORIGINAL NO NO TM Front Shock Tower NO NO NO ORIGINAL NO NO TM Rear Shock Tower NO NO NO ORIGINAL NO NO TM Motor Mount NO NO NO ORIGINAL NO NO TM Battery Mount NO NO NEED TM ORIGINAL NO NO TM Battery Fixing Ring (2) NO NO NEED TM ORIGINAL NO NO TM Front Spool Set NO NO OPTION ORIGINAL NO NO TM Front Spool Block NO NO OPTION ORIGINAL NO NO TM507508BK Tires mounted 5 Spoke Silver wheels High Grip (4) NO NO OPTION ORIGINAL NO NO TM Body 190mm Painted E4JR II 320 NO NO OPTION ORIGINAL NO NO
11 TM EVX Body 190mm Painted E4JR II EVX NO NO OPTION ORIGINAL NO NO TM T86 Body 190mm Painted E4JR II T86 NO NO OPTION ORIGINAL NO NO
STX ELECTRIC TOURING MODEL CAR 1:10SCALE STX-001 SOLID AXLE PULLEY ECCENTRIC CLAMP FRONT RIGHT - REAR LEFT ST03002-1
STX STX-001 ELECTRIC TOURING MODEL CAR 1:10SCALE ST03001 SOLID AXLE PULLEY ST03001-1 SOLID AXLE KIT ST03002-1 ECCENTRIC CLAMP FRONT RIGHT - REAR LEFT ST03002-2 ECCENTRIC CLAMP FRONT LEFT - REAR RIGHT ST03003
Formula World GT 200 DRAFT COPY WWW.TEAMSPEEDMERCHANT.COM. f200.0.0d
DRAFT COPY WWW.TEAMSPEEDMERCHANT.COM f200.0.0d 2 Introduction, Supplies and Additional Equipment Congratulations on your purchase of a Speed Merchant Formula World GT 200 competition chassis. This instruction
EXPLODED VIEWS AND PARTS LIST
INTRODUCTION Serpent created this racing car for the competitive electric 1/12th scale pan car class as the S120-L, which like all our previous cars, has been designed to win straight from the box. Featuring
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > GOKART > BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45
DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431
Number Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43
DR70 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 CYLINDER & CYLINDER HEAD 1 DR70-001 883099044472 CYLINDER 1 1 2 DR70-002 883099044489 GASKET, CYLINDER 1 1 3 DR70-003 883099044496
FLOORTEC R 680 B. Part List US-English. Model: FLOORTEC R 680 B
Model: Part List US-English Table of Contents General view 3 Rotomolded assembly 5 Chassis assembly 7 Drive assembly 9 Steering assembly 11 Control pedals assembly 13 Waste container assembly 15 Filter
46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis
46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis 46431x92A Garden Tractor (1998) Page 2 of 16 Body Chassis 1 092546E701 Bracket, Seat 2 091963 Z Plate Assembly, Switch 3 164X26 Spring, Compression
INSTRUCTION MANUAL & REFERENCE GUIDE
INSTRUCTION MANUAL & REFERENCE GUIDE The Serpent S811 Cobra is a complete new platform for the 1/8 scale electric offroad category of racing. The Serpent S811 Cobra is designed to be a world champion,
USED BUT NOT SHOWN: ITEMS 11-24.
FO000900 - TABBING SYSTEM, MCS TABBER 2" Item Part Number Description Quantity 1 SM022604 Base Sub Assembly, MCS Tabber (2") 1 2 AF000512 Tabbing Head, MCS 2" 1 3 VC014001 Cable, Molded, DB25M-DB25F, 3
ILLUSTRATED PARTS LIST
TW400 WITH 390cc HONDA ENGINE 390cc 2 WHEEL DRIVE UTILITY VEHICLE ILLUSTRATED S LIST 390cc 2WD B O D Y D I A G R A M 390cc 2WD F R A M E D I A G R A M 390cc 2WD D R I V E T R A I N D I A G R A M DESCRIPTION
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 2 CONTENTS-ENGINE ENGINE GROUP ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP FRAME GROUP... 5 4 ENGINE PARTS LIST... 9 5 FRAME PARTS LIST...37 1 ABOUT THIS PARTS
DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX
INSTRUCTION MANUAL & REFERENCE GUIDE
INSTRUCTION MANUAL & REFERENCE GUIDE Welcome to the Serpent owners network! By buying the Cobra GTe, you have become part of the fast growing base of Serpent drivers around the world, active in most classes
125 DUKE EU 2011 SPARE PARTS MANUAL: CHASSIS ENGLISH ART.NO.: 3CF8003K4EN
SPARE PARTS MANUAL: CHASSIS ART.NO.: 3CF8003K4EN ENGLISH INDEX FRONT FORK, TRIPLE CLAMP HANDLEBAR, CONTROLS FRAME SIDE / CENTER STAND 3x 4x 5x 6x SHOCK ABSORBER SWING ARM EXHAUST SYSTEM AIR FILTER 7x
DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002
DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002 842645048173 GASKET, CYLINDER 1 1 3 DR90-003
MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
Reproduction. Not for. Coronet RD Series Riding Mowers. Parts Manual. 15.5HP Product. 17.5HP Product
Parts Manual 15.5HP Product Coronet RD Series Riding Mowers Mfg. No. Description 7800674 Coronet RD, 15.5HP Hydro (CE) 7800675 Coronet RD, 15.5HP Hydro (CE, FR) 17.5HP Product Mfg. No. Description 7800678
Build Tips for Sakura Zero S
Build Tips for Sakura Zero S Revision Control Revision Revision Notes Report By Reviewed By Rev0 First Draft Marc Baynham Introduction The way in which a competition electric radio controlled car such
ENGINE Dinli 904 D1033-011
ENGINE Dinli 904 D1033-011 ENGINE Model Item Part no Description Specification Quantity 01 E140000-01 E14 ENGINE 450C.C. 1 FENDER SEAT D1033-021 FENDER SEAT Model Item Part no Description Specification
Edge 28B. Simple. Clean. PARTS LIST KENT model: 908 4703 010 146 3087 000(1)2007-01
PARTS LIST KENT model: 908 4703 010 Simple. Clean. 2007-01 2 2007-01 TABLE OF CONTENTS 1 DESCRIPTION PLAN GENERAL VIEW 2-3 CHASSIS SYSTEM 4-5 SIDE BROOM ASSEMBLY 6-7 HOPPER SYSTEM 8-9 TRANSMISSION SYSTEM
UFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary
Section M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
1/10 SCALE 4x4 TRUCK KIT
1/10 SCALE 4x4 TRUCK KIT Recommended Tools Hex Drivers (1.5mm, 2mm, 2.5mm) Thread Lock Cross Wrench Long Nose Pliers Tips for Assembly Use good quality hex drivers to avoid stripping screw heads. Use thread
INSTRUCTION MANUAL. Black Angel. www.copterx.com. Features. Kit Helicopter. Copyright 2009 KY MODEL Company Limited.
INSTRUCTION MANUAL Features - Carbon fiber main blade, tail blade, fly paddle, tail fin for extra weight saving and durability. - CNC machined high grade aluminum rotor head and tail gear box to ensure
Rail 001 112 2 Canvas, folding top 001 101 3 Rear panel 001 102 4 Stip in window, left 001 106 dto. right 001 107
U 411 1 Rear view mirror, round, metall 13cm Ø 002 045 2 Raised airintake 002 060 3 Side panelling, front, left 002 030 Side panelling, front, right 002 031 4 Panelling left 002 051 dto. right 002 052
SECTION VII PARTS BREAKDOWN
SECTION VII PARTS BREAKDOWN 21 REAR TINE TILLER MAIN ASSEMBLY ITEM # PART # QTY DESCRIPTION 1 SEE PAGE 25 1 ENGINE-RIGHT ANGLE DRIVE-PULLEY ASSEMBLY 2 SEE PAGE 27 1 FRAME-TRANSMISSION-HOUSING ASSEMBLY
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
2011-14 F250 6 RADIUS ARM KIT
92154000 Thank you for choosing Rough Country for your suspension needs. 2011-14 F250 6 RADIUS ARM KIT Rough Country recommends a certified technician installs this system. In addition to these instructions,
YARD CRUISER HYDRO DRIVE SERIES 1 & 2
Parts Manual for YARD CRUISER HYDRO DRIVE SERIES 1 & MODELS YZ11BE YZ181BE YZ15BVE YZ158BVE TM CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- REAR... CASTER, FRONT WHEEL & TIRE ASSM Y.... FRONT
K-39/K-39B. Drain Cleaning Machine. Ridge Tool Company/Elyria, Ohio, U.S.A.
K-/K-B A- AUTOFEED Cable Chuck Pan Head Screw # - () Chuck Adapter Nose Piece Spiral Ring () Hand Grip Sleeve Clamp Springs () Spacer Clips () Gasket Drum Front Drum Liner Screw # - x () Drum Back Power
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY Parts List - Handlebar Assembly NOTE: Part numbers listed are available through MacKissic, Inc. Please add 916- prefix to the part number when ordering.
CHAPTER 2 : STERLING MIDI JUNIOR AND STERLING MIDI JUNIOR FOUR
CHAPTER 2 : STERLING MIDI JUNIOR AND STERLING MIDI JUNIOR FOUR Sterling Midi Junior is a transportable rear wheel drive, three or four wheel electric powered Scoota with pneumatic tyres, upolstered seat
VE17 DSP. Model: VE-17DS. Lista Części Polish
Model: VE-17DS Lista Części Polish Spis Treści Handle 3 Base 5 Wiring - Wear and Tear parts 7 DF100-A Foam Generator art no. 50000055 9 Handle VE02 3 Handle VE02 4 Poz Numer katalogowy Iloś Opis 1 VF40104EU
MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: [email protected]
Mini-ZT. Parts Manual. Models 915054-1540 915064-1534 915070-1534. 00462700 4/06 Printed in USA
Mini-ZT Parts Manual Models 0-0 0-00 - 0000 /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an
Front axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Parts Lists - DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PR... Page 1 of 25 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR125 and DR150 Hensim Dirt
REEL LAWN MOWERS MASPORT 400-500-660
Issue A June 2009 REF # 719046 REEL LAWN MOWERS MASPORT 400-500-660 Part number Model Engine MASPORT 019036 400 RRR B & S Series 475 MASPORT 019044 400 RRR Honda GX160 MASPORT 019046 500 RRR B & S Series
Replacement Parts Catalog
Replacement Parts Catalog Replacement Parts Contents A-Class Right Hand 4 Model Printer Assemblies... 1 Cover Assembly (15-3021-01)... 2 Display Assembly (24-2605-01)... 3 Direct Thermal (78-2474-01)...
SLACK PERFORMANCE KARTS
SLACK PERFORMANCE KARTS SET UP GUIDE Thank you for purchasing a 2013 Slack Axiom Chassis. Performance Mfg. strives to provide you with the very best chassis and components on the market today. Your satisfaction
Contents. Description Page Description Page
Contents Description Page Description Page Auger Housing Assembly 1 Muffler 18 Handle and Control Assembly 3 Fuel Tank r Assembly 19 Engine and Drive Assembly 5 Clutch Retarder 20 Cylinder Head 7 Retarder
1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55
DR125 / DR150 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 CYLINDER HEAD ASSY. 1 125-001 883099006937 CYLINDER HEAD COVER 1 1 2 125-002 883099006944 BOLT M6X28 2 3 3 125-003 883099006951
Operations Manual 1/18TH SCALE ARR PRO VERSION OF THE CHAMPIONSHIP WINNING XXX-T
1/18TH SCALE ARR PRO VERSION OF THE CHAMPIONSHIP WINNING XXX-T Operations Manual Introduction Thank you for choosing the Mini-T Pro from Team Losi Sport. This model requires you to install the Radio gear
PARTS MANUAL EH12-2 ENGINE. Model. PUB-EP5713 Rev. 7/99
PARTS MANUAL Model EH12-2 ENGINE PUB-EP5713 Rev. 7/99 940 Lively Blvd. Wood Dale, IL 60191 Phone: 630-350-8200 Fax: 630-350-8212 e-mail: [email protected] www.robinamerica.com Copyright 1999 Robin
Slide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
CLASS III TRUCK PARTS Baker
CLASS III TRUCK PARTS Baker Identify replacement parts for Baker PAL, PAL-AR, PAL-WR 7.2 Instant Access to 250,000 Parts and Growing Baker PAL, PAL-AR, PAL-WR 1 000 774-1033 Toggle 26 000 757-1050 Tie
2003 ACCORD - Automatic Transmission Removal
2003 ACCORD - Automatic Transmission Removal Special Tools Required Engine support hanger, A and Reds AAR-T-12566 Engine hanger balancer bar VSB02C000019 Front subframe adapter VSB02C000016 These special
MAN - MERCEDES - BENZ
SAYFA: 1 10100 10102 10103 355 353 06 15 355 353 03 15 346 353 08 15 AXLE GEAR AXLE GEAR AXLE (WITH BUSHING TYPE) (WITH BUSHING TYPE) (WITH BUSHING TYPE) 2521 2517-2521-2622 10104 10105 10106 308 350 00
4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN
COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN SERIES MECHANICAL SWEEPERS pn GS328985 REV B MAY 2012 COPYRIGHT 2012 GLOBAL ENVIRONMENTAL PRODUCTS, INC. ALL RIGHTS RESERVED REV B MAY 2012 Page 2 Common
PARTS BOOK. hohner 48/5S. Stitcher Head. Vol.2 UB706016-01. 110407/hohner48/5S/01/KS
PARTS BOOK hohner /5S Stitcher Head 007/hohner/5S/0/KS Vol. UB70606-0 Hohner /5 Revision Control List Page / Correction (a: Parts No. c: Description d: S/N e: Remarks f: Other g: Registration h: Illustration
VE13P-EU. Model: VE13. Lista Części Polish
Model: VE13 Lista Części Polish Spis Treści Handle 3 Base 5 Wiring - Wear and Tear parts 7 DF100-A Foam Generator art no. 50000055 9 RECOMMENDED SPARE PARTS 13 Handle VE02 3 Handle VE02 4 Poz Numer katalogowy
UNIVERSAL 1550 PRE-MIX DISPENSER
MODEL NO. 284974xxx 1 of 8 Control Code A ªIMI Cornelius Co., 1987-95 22 5 6 2 3 7 4 1 26 32 19 28 33 29 27 11 15 18 16 17 14 9 31 30 34 24 20 23 8 10 21 13 FIGURE 1. ASSEMBLY ªIMI Cornelius Co., 1987-95
RC4WD Trail Finder 2 SWB. 1/10 Scale 4x4 Chassis Kit
RC4WD Trail Finder 2 SWB 1/10 Scale 4x4 Chassis Kit Recommended Tools Hex Drivers (1.5mm, 2mm, 2.5mm) Thread Lock Cross Wrench Long Nose Pliers Tips for Assembly Use good quality hex drivers to avoid
SPARE PARTS LIST AND ASSEMBLING GUIDELINE FOR EM 50 FAN
SPRE PRTS LIST ND SSEMLING GUIDELINE FOR EM 50 FN Munters euroemme S.p.. Strada Piani, I-807 Chiusavecchia (Imperia) - Italy Tel. +39 083 5 Fax +39 083 5333 http://www.munters.com e-mail:[email protected]
SCION tc 2005-2008 COIL OVER SUSPENSION Preparation
SCION tc 2005-2008 COIL OVER SUSPENSION Preparation Part Number: PTR11-21070 NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents: Item # Quantity Reqd. Description
ASSOCIATED 1:10 SCALE T3 MANUAL
ASSOCIATED 0 SCALE T3 MANUAL INSTRUCTION MANUAL FOR THE RC10T3 ELECTRIC TRUCKS #7003, 7013, 7038, 7048 ASSOCIATED S RC10T3 TRUCK-- READER S CHOICE OF THE YEAR TIMES! Radio Control Car Action magazine,
LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
K&T Saw Shop 606-678-9623 or 606-561-4983
12-600072F PRO MAC 850 SUPER CHAIN SAW 05/92 to Current IPL 215710-R1 Page 1 of 16 Accessories www.ktoutdoor.com 12-600072F PRO MAC 850 SUPER CHAIN SAW 05/92 to Current IPL 215710-R1 Page 2 of 16 Accessories
Propeller Equipment Sale. For Questions please contact Dan Cork [email protected] 918-636-3567
Propeller Equipment Sale For Questions please contact Dan Cork [email protected] 918-636-3567 Propeller Equipment Sale The equipment for sale is used in the repair and overhaul of aircraft propellers. Propeller
2016 Price Sheet. Custom Built Replacement Chassis
2016 Price Sheet Custom Built Replacement Chassis 5557 Chevy Car Direct Replacment Chassis 15,895 5362 Corvette Direct Replacment Chassis 15,895 5557 Chevy Car Pro Street Chassis 16,895 5362 Corvette Pro
NuStep TRS 4000 Parts List 1.6
NuStep TRS 4000 Parts List 1.6 Note: Most parts are available individually, but to simplify installation, ASSEMBLIES (in CAPS) only come fully assembled. Items noted as (not shown) were replaced with current
11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 1 of 19 Accessories
11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 1 of 19 Accessories 11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 2 of 19 Accessories 84453 Kit - Piston tool 69191 Kit - Pressure test adaptor
DOOR PARTS SECTION D-1
DOOR PARTS SECTION D-1 1 11 10 11 9 8 1 1 7 6 10 5 4 D- DOOR ASSEMBLY ITEM NO DESCRIPTION QTY. PART NO 1 SERVICE DOOR ASSEMBLY ~ * CONTROL PANEL 1 * DOOR GUARD 1 * 4 DOOR ROLLER ASSEMBLY 1 1148-7 5 T-HANDLE
SC351. Model: SC351 NIL. Part List US-English
Model: NIL Part List US-English Table of Contents GENERAL VIEW 3 COVER AND TANKS 5 FRAME SYST 7 HANDLE SUPPORT SYST 9 HANDLE SYST 12 MOTOR AND DECK SYST 15 BRUSH DECK SYST 17 ACCESSORIES 19 WIRING DIAGRAM
6 inch A-Arm Lift Kit WARNING: 16-018/16-019. installation instructions. will fit CLUB CAR DS. included:
Revised May 205 6-08/6-09 6 inch A-Arm Lift Kit will fit CLUB CAR DS installation instructions included: Rear Lift Blocks Main Suspension Assembly Spindles A-Arms Rear Shock Mounting Plates U-Bolts WARNING:
VW Caddy W21-760-3503 INSTALLATION INSTRUCTIONS
Unit 626 Kilshane Avenue, North West Business Park, Ballycoolin, Dublin 15, Ireland Telephone: +353 1 8612 632, Fax: +353 1 8612 647, email: [email protected] www.driveriteltd.com VW Caddy W21-760-3503
S&W Race Cars and Components, Inc.
S&W Race Cars and Components, Inc. 11 Mennonite Church Road Spring City, PA 19475 TECH & INFORMATION: 610-948-7303 ORDERS: 1-800-523-3353 OFFICE FAX: 610-948-7342 E-Z INFO FAX 610-792-1234 CAUTION!!! -
2510/2550 Dust Control Burnisher
250/2550 Dust Control Burnisher Operator and Parts Manual TENNANT COMPANY Commercial Products 2875 RANSOM STREET HOLLAND MI 49424 U.S.A. FAX: 800 678 4240 CUSTOMER SERVICE: 800-982 7658 607597 Rev. 0 (2-00)
Range Road RR Series Semi-Automatic Firewood Processor. Crated Unit Assembly Manual
Range Road RR Series Semi-Automatic Firewood Processor Crated Unit Assembly Manual 1 1) Undo 8-18mm x 19mm Nuts and bolts, 2 on each leg of top frame 2) Lift top of Metal crate off and move out of work
WARNING TO END USER, INSTALLER AND SELLER OF THIS PART!
WARNING TO END USER, INSTALLER AND SELLER OF THIS PART! By installing this part you are accepting full responsibility and liability for proper wheel and tire fitment after installation. It is the installer
K&T Saw Shop 606-678-9623 or 606-561-4983
11-600072-02 PROMAC 800 CHAIN SAW 08/80 to 05/85 IPL 215724-01 Page 1 of 20 Accessories & Tools www.ktoutdoor.com 11-600072-02 PROMAC 800 CHAIN SAW 08/80 to 05/85 IPL 215724-01 Page 2 of 20 Accessories
MODEL 2400 RAISED BED PLASTIC MULCH LAYER OPERATING MANUAL
MODEL 2400 RAISED BED PLASTIC MULCH LAYER OPERATING MANUAL Rain-Flo Irrigation 929 Reading Road East Earl, Pa 17519 PH: 717-445-3000 Table Of Contents Bed Height...............................7 Cover Disk...............................9
Verify caster, camber and toe-in are correct before proceeding.
If rotating the tie rod end 360 degrees changes the toe-in too much, use the rack tie rod to make smaller adjustments. Put the tie rod end in the steering arm and snug the castle nut before adjusting.
HAND PALLET TRUCK Lift-Rite
HAND PALLET TRUCK Lift-Rite Before you Order: To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the loweredheight models (MINI or CHEP).
INSTRUCTION MANUAL AND PARTS LIST MODEL 14-10
VERTICAL BAND SAWS INSTRUCTION MANUAL AND PARTS LIST MODEL 1-10 DAKE/PARMA WHEN ORDERING PARTS GIVE COMPLETE SERIAL NUMBER OF MACHINE GIVE PART NUMBER AND NAME GIVE AMOUNT REQUIRED Unless the above data
TUNING SECTION ABOUT ADJUSTMENTS
TUNING SECTION ABOUT ADJUSTMENTS R/C race trucks, in general, are some of the most adjustable racing machines of any scale. What s really amazing is just how easy and quick it is to make all of our changes:
PRINCE 50 Parti di ricambio agg. al 30-11-09
. 缸 头 罩 部 件 CYLINDER HEAD COVER(FOR EUROPE) 50000 COVER COMP HEAD 2 5000 GASKET HEAD COVER 3 50002 Aeration Head Cover 4 50372 AERATION CAP 5 50355 TUBE BREATHER 6 50356 TIE-IN 7 50358 AERATION TUBE ASSY
Rear Disc Kit. Front Caliper
Caliper and Wheel Kit 52-0600 1973-85 FX-FLH Chrome Rear Wheel/Brake Assembly includes chrome 16 x 3.0 Wheel Assembly, chrome caliper, chrome 51T sprocket with bolts, 10 or 11 1 /2 rear drill brake disc,
K&T Saw Shop 606-678-9623 or 606-561-4983
13-600072-06 PRO MAC 8200 05/92 to Current IPL 215710-02 Page 1 of 20 Carburetor Assembly www.ktoutdoor.com 13-600072-06 PRO MAC 8200 05/92 to Current IPL 215710-02 Page 2 of 20 Carburetor Assembly 214763-02
DR ALL-TERRAIN FIELD and BRUSH MOWER
DR ALL-TERRAIN FIELD and BRUSH MOWER Parts List and Assembly Diagrams Important: Please read the Safety and Operating Instructions and the separate Engine Manufacturer s Owners Manual to become familiar
PART NO. DESCRIPTION QTY. REMARKS PRICE
ENGINE RA171989K1 INSULATOR, E/G & /M MOUNT 02 RUBBER HARDNESS = HS90 32,50 RA197518K1 INSULATOR, E/G ROLL (FRONT) 01 RUBBER HARDNESS = HS90 32,50 RA554855K1 INSULATOR, E/G Roll (REAR) 01 RUBBER HARDNESS
CAM-03, Camshaft Assembly Oil Seal Replacement
CAM-03, Camshaft Assembly Oil Seal Replacement Tools Jack stands Floor Jack Metric Socket set Metric Wrench set Porsche Timing Belt Tension tool (P9201) Flywheel Lock (P9206) Balance Shaft Pin Spanner
MERCEDES FIRST EDITION - 2013
FIRST EDITION - 2013 CONTENTS Accessories... 1 Hydraulic Jacks Air Intake... 2 Air Filter Charger Charging System Intake Charger Hose Intake Manifold Intake Pipe Air Filter Intercooler Charger Aircondition...
CHAPTER 5 PARTS. This chapter describes assemblies / subassemblies / parts considered replaceable at on-site field installation.
CHAPTER 5 PARTS PARTS BY PICTORIAL This chapter describes assemblies / subassemblies / parts considered replaceable at on-site field installation. NOTE: The following is a breakdown description of the
Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification
OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product
Parts List. For printer models: www.satoamerica.com. CL408e / CL412e PN: 9001077(D)
Parts List For printer models: CL408e / CL412e www.satoamerica.com PN: 9001077(D) SATO America, Inc. 10350A Nations Ford Road Charlotte, NC 28273 Main Phone: (704) 644-1650 Technical Support: (704) 644-1660
HOME GYM. Model. Retain This Manual for Reference OWNER'S MANUAL. www.hyper-extension.com
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice www.hyper-extension.com HOME GYM 50036 Hardware Identifier Assembly Instruction Parts List Warranty
INSTRUCTION MANUAL & REFERENCE GUIDE
INSTRUCTION MANUAL & REFERENCE GUIDE Welcome to the Serpent owners network! By buying the Cobra GT, you have become part of the fast growing base of Serpent drivers around the world, active in most classes
Make these adjustments before racing
FINAL ADJUSTMENTS ADJUSTING CAMBER To set the camber we recommend using our supplied #1719 camber/rear toe-in gauge. When adjusting camber you need to have the car ready to run with no body. Make these
DYNA RIDER FOOTBOARD KIT
-J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English
MIXER K45SS AND KSM75
INTERNATIONAL PART NUMBERS ITALICIZED MIXER VARIATIONS OF K45SS AND KSM75 SOLID STATE c 2003 KITCHENAID 09 03 Litho in U.S.A. (bd) This Parts List Supercedes All Previous K45SS Parts Lists. Updates Required
PROFESSIONAL PRODUCTS- PET NAIL GROOMERS
- S SERVICE NUMBER 29-0A/-0B 29-0E 29-0F 29-0H 29-0J 29-0K 29-0 To select the model desired, click on the highlighted service number. D-5 S LIST NEW MODEL(S) ADDED FIRST ISSUE 6/76, COLUMN # FIRST ISSUE
