Exterior range
Exterior range A comprehensive range of low-energy, high performance LED lights for exterior spaces including residential, commercial and leisure environments.
Why choose Exterior LED lighting? High ratings All of the products in our Exterior range have an rating of at least 65, making them exceptionably durable and capable of withstanding harsh weather conditions such as wind and rain. They are sealed using an anti-corrosion powder coating for extended life. Maximum efficacy We combine low-energy LEDs, high-quality componentry and expert design engineering to create products that use as little as power as possible. On average, Brightgreen lights use as little as 20% of the power compared to halogen and incandescent equivalents and perform significantly better than LEDs currently on the market. Australian designed Brightgreen products are designed, engineered and tested in our Melbourne headquarters. We are constantly modifying our product range to ensure that our lights harness the latest technologies and tackle our customers needs. Low environmental impact We re committed to producing non-toxic, heavy metal-free products that emit light that contains no UV rays. Our lights are 98% recyclable and are supported by a buy-back scheme, meaning that when they eventually do expire we will buy them back for recycling. Options to suit your space We offer Cube, Curve and Tri series Exterior lights, allowing you to highlight square-edged spaces with crisp square-beam lighting, complement flowing lines and rounded architecture with round beam lighting, or generate soft triangular forms with geometric beam lighting. Resilience In the not so distant past our engineers designed products that sit on the outside of deep-sea submarines. Now they have designed our outdoor series of lights using the principles learnt from the harshest of environments. This means this series of lights are tough; our Aluminium is copper free to prevent corrosion, we anodise this to seal it off and make the hardest shell possible. Then in an effort that might be considered extreme we cover it again with a tough powder coating. The result is a light that will withstand hot Australian summers, salty seaside conditions and anything nature can throw at it. Superb longevity All Brightgreen Exterior range lights are designed to last as long as possible up to 30,000 hours and are supported by a 5-year warranty Planning a new build project? Brightgreen now offers free lighting plans We offer a free lighting design service via our partner networks, giving you everything you need to bring your ideas to life. To register for this service, visit lifetime Five year warranty
1 2 ratings explained When choosing exterior lighting especially for environments that are subject adverse weather conditions such as extreme wind, rain or salt the rating of the product is essential to informing your decision. But what do these two numbers mean? stands for ingress protection, meaning the protection of the light against the infiltration of foreign bodies. Each rating has two numerals; the first describes how dustproof the light is, and the second describes how waterproof it is. 50mm 12mm Protected against solid objects greater than 50mm Protected against solid objects greater than 12mm 1 2 15 Protected against dripping water Protected against dripping water when tilted up to 15 IES recommended lighting levels The Illuminating Engineering Society (IES) recommends the following minimum lux levels for various areas. To find out the lux level of a Brightgreen light when installed at a specific height, visit the page of its area on Brightgreen.com. Exterior Area Garage/car park 30 Covered walkway 30 Controlled gateway 150 Covered industrial area 50 Recommended lux level 3 4 2.5mm 1.0mm Protected against solid objects greater than 2.5mm Protected against solid objects greater than 1mm 3 4 60 360 Protected against spraying water up to 60 Protected against water splashed from all directions Stairway 100 Supported software 5 6 Dust protected Dust tight 5 6 Protected against jets of water Protected against strong jets of water All Brightgreen products are supported with a range of 3D and photometric files that cover a variety of software platforms. This makes factoring our lighting into interior and exterior projects quick and easy. 1st Row + 2nd Row = rating 7 8 Protected against the effects of immersion between 15cm and 1m Protected against long periods of immersion under pressure To access Brightgreen products in DIALux lighting design software, simply find us in the DIALux manufacturer menu tab and install the plugin or visit Brightgreen.com to download the online plugin. For Autodesk Revit support, download up-to-date files for all of our products in one click at Brightgreen.com. All of our LED lights for outdoor use meet a minimum rating of 56, ensuring that they are protected against the elements and will see out their entire lifetime. We also provide IES photometric data files and.sat 3D vector files for use in a variety of architectural CAD and simulation design programs. These can be found via Brightgreen.com.
F400 ESH Curve floor light The F400 E Curve floor-mounted light emits a halo of light that provides general illumination for driveways, lawns, parks and other outdoor recreational areas. 390 4 watts 65 temp. 235 800 DRAFT F400 ES Curve floor light Available in either a warm white or cool white colour temperature, the smaller F400 E Curve emits a 400-lumen halo of light. 390 4 watts 65 temp. 235 F400 ESH CR F400 ES CR 500
F700 ESH Cube floor light The F700 E Cube projects four evenly spread beams of light onto the ground, ideal for illuminating leisure spaces, driveways, entrances and pathways. 680 8 watts 65 temp. 800 120 DRAFT F700 ES Cube floor light This floor light provides a more condensed counterpart that can be used in areas without the need for high brightness levels, or to complement the F700 E Cube. 680 8 watts 65 temp. F700 ESH T F700 ES T 500 120
F500 ESH Tri floor light A three-sided floor-mounted LED light that is ideal for adding general or way finding illumination to exterior walkways. 540 8 watts 65 temp. 360 800 125 F500 ES Tri floor light This 500-lumen floor light provides subtle illumination that can be used to define pathways or boundaries. 540 6 watts 65 temp. 210 F500 ESH T F500 ES T 125 500
W200 ES Curve wall light The W200 ES Curve wall light is mounted flush against a wall and casts a rounded beam of either cool or warm light through a tempered glass lens onto exterior surfaces. 240 3 watts 65 temp. 82 43 100 W400 ES Curve wall light The W400 ES Curve projects a soft 400-lumen beam of light, perfect for highlighting small design details. Its anticorrosion body withstands attack from weather conditions, making it durable and maintainable. 480 6 watts 65 temp. 82 43 W200 ES CR W400 ES CR 230
W200 ES Cube wall light Raised away from its mounting surface, the W200 ES Cube wall light projects two rectilinear beams of light across walls to create interest and provide gentle illumination. 240 3 watts 65 temp. 65 92 170 W400 ES Cube wall light This petite square-beam wall light provides a 400-lumen straight-edged beam of either warm or cool light on any surface. 480 6 watts 65 temp. W200 ES CB W400 ES CB 65 200 92
W200 ES Tri wall light Generating bi-directional beams of either warm or cool light, the W200 ES Tri wall light spreads illumination in two directions across a wall surface. 240 3 watts 65 temp. 106 157 W400 ES Tri wall light With only one luminaire, the W400 ES Tri wall light projects a triangular spread of light in a single direction across a surface. 480 6 watts 65 temp. W200 ES T W400 ES T 106 238
G200 E Tri ground light Add extra illumination to ground surfaces in the form of a 120 beam of light using the G200 E Tri. 240 3 watts 65 temp. 101.8 92.1 70 92 W400 ESH Curve wall light With a linear LED luminaire set in a surfacemountable body, the W400 ESL Curve emits a soft rounded glow, ideal for decorative lighting. 390 6 watts 65 temp. 235 G200 E T W400 ESH CR 250
F800 EL Curve floor light The floor-mounted F800 EL Curve has a linear LED strip set into its circular form that emits a rounded glow, best for general illumination. 800 10 watts 65 temp. 130 83 500 130 180 30 F800 EL Cube floor light The linear form of the F800 EL Cube floor light accents square-edged spaces with a rectangular spread of light. 800 10 watts 65 (mm) temp. 129.5 30 F800 EL CR F800 EL CB 499.5 100.4 180 84
W400 ESL Cube wall light The W400 ESL Cube wall light can be mounted to any surface to add a rectilinear LED lighting feature. 390 4 watts 65 temp. 130 100.4 145 100.2 29.6 129.6 W400 ESL Curve wall light The W400 ESL Cube wall light can be mounted to any surface to add a rectilinear LED lighting feature. 390 4 watts 65 temp. 100 130 W400 ESL CB W400 ESL CR 145 30 130
Explore the complete Brightgreen Range Interior Curve D900+ D900 CL D700 D400 D900 SH D400 SH D900 SHX D900 S D900 SX At Brightgreen, we design and manufacture low-energy, P900 P200 D700+ W900 W200 D2000 CR W900 SX W200 SX high-performance LED lights for interior and exterior use. Our Interior product range is comprised of the Curve series of circular-beam LED lights, the Cube series of square-beam LED lights, the Track & Surface series of surface-mounted LED lights, Cube and the Retrofit series of LED replacement products for outmoded D900 v2 D700 D400 D900 SH D900 SHX D900 S D900 SX halogen, CFL and incandescent lights. We also produce Curve and Cube series lights for outdoor use, along with the Tri series that focuses on soft triangular forms and geometric beams. W900 W200 D2000 W900 SX W200 SX P900 P200 Exterior Curve Track & surface TR700 TR700 S T900 LH T200 LH T2000 LH F400 ESH F400 ES W400 ES W200 ES W400 ESH W400 ESL F800 EL D900 SLHX D200 SLHX D2000 SLHX T900 H CR T900 H CB Cube F700 ESH F700 ES W400 ES W200 ES W400 ESL F800 EL Retrofit DR700 DR450 TR700 TR700 S AR900 SL3500 PR900 BR1000 Tri F500 ESH F500 ES W400 ES W200 ES G200 E BR450 BR250 BR220 BR200 BR180 BR80 D2000 CR D2000 CB
About Brightgreen Brightgreen is an Australian LED lighting company. We design and manufacture energy efficient premium lighting products that disrupt current business models by defying planned obsolescence and designing things to last. All of our products are designed with a focus on exceptional engineering skill, eco-awareness and high-quality user experience. Brightgreen lights are easy to install, affordable to power and last for up to 70,000 hours, delivering life-enhancing illumination throughout their lifetime. To find your nearest stockist, visit