EPS Electric Power System The newest generation of built-in generators.
Rosenbauer EPS Electric Power System EPS Electric Power System. Unique. Flexible. Powerful. The Rosenbauer Electric Power System is the modern answer to the problem of more electrical power on the fire fighting truck. Rosenbauer offers the new EPS XS for installation near the engine and belt drive with power of up to 11 kva as well as the EPX XL with cardan shaft drive from the PTO of the chassis with power of up to 90 kva. Both systems enable new applications for supplying electricity to devices in use. Benefits of the EPS Electric Power System. Direct, lossless, and variable speed drive of the generator Largely maintenance-free system due to the direct drive of the generator Parallel operation of pump and generator with high load at EPS XL possible Versatile applications (all electrical devices) Freedom of positioning of the devices on the vehicle Simple retrofitting of devices Operation via LCS display Satisfies DIN 14686 (EPS XL) and DIN 14687, supplemented by 400V (EPS XS) High safety through permanent insulation monitoring and IT network configuration An individual solution for you. The modular system comprised of a generator, converter, and electrical consumers is easily adapted to the needs of each customer and thus to each vehicle category. The overall system including safety devices is designed according to current standards. The system components such as generators and the converters adapted to this purpose were developed in close partnership with renowned specialists, only Rosenbauer has access to these components. 2
EPS XL Power up to 90 kva The EPS XL system is a high-performance generator system as an alternative to conventional built-in generators and large mobile units. It serves for the electrical drive of all consumers in the fire fighting truck with the exception of the centrifugal pump. Installation in the vehicle The power generator with integrated rectifier is built into the chassis frame and driven directly by a PTO of the chassis by way of a cardan shaft. The converter and control box are flexibly positioned in the body. Additional sockets are flexibly installed in the body depending on the requirements. Sizes from 16 to 63 A are possible. Technical data Design Electrical power (at maximum power generator speed > 3,000 1/min) Compliance with standards Artificial mains network 60 kva Artificial mains network 80 kva Engine drive 30 kva Artificial mains network continuous output Pel, 3~ = 60 kva / cos ϕ = 0.8 / 48 kw Pel, 3~ = 80 kva / cos ϕ = 0.8 / 64 kw DIN 14686 electric switchboard DIN 14686 400 V AC, 50 Hz L1 L2 L3 N NP autotransformer DIGIMATIC 48 (incl. inverter) CONTI CAFS 30E compressor 400 V AC, 50 Hz L1 L2 L3 DC / AC inverter 60 kva or 80 kva DIGIMATIC 48 (incl. inverter) DC / AC inverter 30 kva DC engine generator insulation monitor 600 VDC Diagram: EPS Electric Power System 3
EPS Electric Power System Rosenbauer EPS XS Power up to 11 kva With the EPS XS, it is possible for the first time to produce three-phase 400 V AC voltage in a fire fighting truck by way of a direct motor using the power generator installed in the engine compartment. In contrast to conventional single-phase 230V systems, all heavy devices, such as submersible pumps, contaminated water pumps, etc. can be driven directly. Installation in the engine compartment The EPS XS generator is built directly into the engine compartment of the vehicle and driven by a belt. The converter and control box are flexibly positioned in the body. The position of the sockets can be selected according to the vehicle load. Technical data Design Electrical power (at maximum power generator speed of 6,000 1/min) Compliance with standards Artificial mains network 11 kva Short-term superior performance Pel, 3~ = 11.2 kva / cos ϕ = 0.8 / 9.0 kw Continuous output Pel, 3~ = 9.3 kva / cos ϕ = 0.8 / 7.5 kw DIN 14687, supplemented by the 400 V range engine electric switchboard DIN 14687 (for 400 V) Tried and tested technology The technology of the EPS XS equals that of the EPS XL system 1:1. Rosenbauer has many years of experience as the only manufacturer of such technology in the fire fighting industry. generator 400 V AC, 50 Hz 400 V AC, 60-500 Hz inverter, insulation monitor, autotransformer 4
EPS Electric Power System Rosenbauer Applications... more light Electricity is the most flexible source of energy. Electricity offers the widest variety of possible uses, whereby completely new applications emerge.... more pump output... more feed pumping... more consumers... more compressed air foam... more foam... more emergency power supply... more decontamination 5
EPS The newest generation of built-in generators. Fire brigade Aschheim / Germany EPS XL 52 kva, DIGIDOS 36 Fire brigade Rottach-Egern / Germany EPS XL 80 kva, hydraulic winch Fire brigade Günzburg / Germany EPS XL 60 kva Fire brigade Busan / South Korea EPS XL 60 kva, CONTICAFS 30E with SkyCAFS Airport Genf / Switzerland EPS XL 60 kva, 2x DIGIMATIC 48, hydraulic winch Hong Kong Fire Service Department EPS XL 60 kva, DIGIMATIC 48, CONTICAFS 30E www.rosenbauer.com www.facebook.com/rosenbauergroup Text and images non-binding. The images may depict special editions that are only available at an additional charge. Subject to change due to technical advances. VI0421/EPS_EN_2015_05_143659 References