Windows 8 VPN Get Connected Updated: August 30, 2012 Applies To: Windows Server 2012, Windows Server 2012 R2 Preview [Content in this topic that applies specifically to Windows Server 2012 R2 Preview is preliminary and subject to change in future releases.] The VPN client in Windows 8, like the operating system itself, has been optimized for touch devices. This optimization makes creating a VPN connection, and connecting to corporate networks, faster and easier. The VPN connection icon now appears in View Available Networks, along with other network connections. Creating a VPN profile requires only the server information. Windows auto-discovers authentication methods and tunnels while connecting, making the VPN experience seamless. The following sections describe how to set up and edit VPN connections using Windows 8: Creating a new VPN connection Connecting to a corporate network using an existing VPN Connection Editing connection properties Deleting a connection Creating a new VPN connection In Windows 8 you can use the Get Connected Wizard to create a VPN profile. To launch the wizard, type vpn in Settings, and then click Set up a virtual private network (VPN) connection.
Figure 1: Launch the Get Connected Wizard In the wizard, you will provide the internet address of the Remote Access VPN server to which you will connect, and a name for the new connection. You can use an IP address or the fully qualified domain name of the Remote Access server. If you have a computer running Windows 8 with VPN already configured, you can view the server settings by viewing the connection properties, as shown in Figure 8. The destination name is the text that will be used for the VPN connection name (profile name), as shown in Figure 2. Note that you can click Remember Credentials which saves your credentials on the first successful connection attempt. This creates a new Discovery Profile which the client can use to connect to VPN.
Figure 2: Get Connected Wizard Screen 1 For EUR students the credentials are: Internet address: vpn-eur-pptp.eur.nl Destination name: VPN connection EUR Discovery Profile Figure 2 shows the only information needed to create a VPN profile. Authentication and tunneling protocols are negotiated and configured during the first successful connection attempt for username/password based VPN deployments. Once these protocols are negotiated, you can edit these settings in Connection Properties. Connecting to a corporate network using an existing VPN connection To connect with an existing VPN connection 1. Open Charms by moving the cursor to the top or bottom right corner of your computer screen. It can also be accessed by using the Win+C hotkey.
Figure 3: Charms Bar 2. Click Settings and then click the network icon displayed in the right-hand corner of the screen, as in Figure 4 below.
Figure 4: Network icon location 3. In Networks click the VPN connection that you want to use and then click Connect. Figure 5: Connect to VPN Once you click Connect, a new connection is negotiated with the server using the saved credentials. If you have not previously checked Remember Credentials while creating the connection, you will be asked to provide credentials.
Figure 6: Specify VPN connection credentials When you select Remember my credentials while creating your connection, you won t be asked for the credentials in further connection attempts. You can clear the cached credentials by right-clicking the connection and selecting Clear Cached Credentials, as shown in the following figure.
Figure 7: Clear cached credentials Editing connection properties You can edit a connection that you have already configured by right-clicking the connection and then selecting Connection Properties. Connection Properties has four tabs described below. You can access Connection Properties by clicking View Connection Properties in Networks.
Figure 8: Connection Properties Connection Properties Tabs: 1. General Change the VPN server hostname or IP address. Additionally, configure an interface to public network. 2. Options Configure PPP Settings and enable/disable caching of credentials. 3. Security Configure tunnels, authentication, and encryption settings. 4. Networking Configure transports (or protocols). The most common protocols are TCP/IPv4 and TCP/IPv6. Deleting a connection In the Start screen, click Search in Charms, type vpn and then click View Network Connections under Settings.
Figure 9: View Network Connections Right-click a VPN connection and then click Delete, as in Figure 10 below: Figure 10: Deleting a connection