ABLOY EL614 Motor lock with bolt Abloy Oy An ASSA ABLOY Group company

EL614 42/52 25/35 25 22 263.5 225 38.2 17.3 3 10 2

Contents TECHNICAL DATA... 4 INSTALLATION... 5 WIRING DIAGRAM... 6 DRILLING SCHEME... 8 INSTALLATION SCHEME... 9-10 FOREND... 11 STRIKE PLATES... 11 3

TECHNICAL DATA Operating voltage: 12-24V DC (+/- 15%) 12-18 V AC (-10%/+15%, RMS Current: Relay output: norm. 150 ma Idle 70 ma max. 700 ma max. 0.8 A, 30V AC / V DC resist.,max. 20W Ambient temperature: -20 - +60 C Bolt throw: Backsets: Forend: Door clearance: Monitoring outputs: Control unit: 22 mm 25 and 35 mm 25 mm, 32 mm (wooden door) 2-5 mm (between forend and striker) - hook bolt dead locked / not dead locked - hook bolt in / not in - door open / closed - manual use: mechanical opening or burglary EA460 Connection cable: EA214 (6 m) / EA224 (10 m) 16 x 0.14 mm 2 Strike plate: EA300, 803677 + 803711, 804811 + 803711 Optional backup card: 952169 4

DRILLINGS / INSTALLATION In order to enable the trouble-free operation the drillings and the installations must be made according to the instructions in this booklet. The door itself and the door closer must be correctly installed and adjusted. Make sure the hook bolt can move freely, when controlling the lock electrically. Lock case Strike plate Leave space for cable and connector in lock case mortice. When using cage nuts. Connection cable Lead cover 12mm Center line Min. 150 mm Kaapeli / Kabel <50mm (EA280) >50mm (EA281) Leave some extra cable on both sides of the lead cover. Copyright Abloy Oy Joensuu Factory 2004 5

6 R WIRING DIAGRAM EL614 12-24 VDC +/-15% 12-18 VAC -10%/+15%, RMS Monitoring Potential free control Manual use by keycylinder 12-24VDC 12-18VAC 1 2 AC /DC AC /DC 3 NO OPEN 4 5 C NC DOOR CLOSED 6 NO IN 7 8 C NC BOLT IN NOT IN 9 NO NOT OUT 10 C BOLT OUT 11 NC OUT 12 NO MANUAL 13 C USE 14 15 16 17 OPENING RESERVED 18 GND POWER CONTROLS S/N: 3EA460 DELAY SWITCH 1 0 1 2 4 Example 3s. DIP 4. 1=safe 0=secure at power malfunction. See manual! BACKUP+ BACKUP - VIOLET WHITE RED BLACK BROWN BLUE YELLOW GREY RESERVED RESERVED FREE FREE *) 1 2 3 0 0 0 0 0 1 0 1 0 0 1 1 1 0 0 1 0 1 1 1 0 1 1 1 TIME 2s 3s 4s 5s 6s 8s 12s 15s 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Red Black *) External connection for Backup card 952169 ABLOY EA214 / EA224 Connection cable EA214/ EA224 Cable 16 x 0.14 mm 2 Length 6m / 10 m Lock case EL614 S N If magnet striker plate EA300 is not in use. ABLOY EA502 for steel doors *) When backup card is attached, in the case of power failure, bolt is run into the status which is selected with Dip 4 (bolt in/bolt out). Table 1 represents how lock functions in the case of power failure depending on the position on Dip 4. Even though backup card is attached, in the case of power failure, the lock does not react on controls or supply indications of bolt or door status. Note! The functions of Dip 4 are valid only when backup card is attached to the control unit! Position of Dip 4 0 0 1 1 Bolt status Bolt in Bolt out Bolt out Bolt in Functions Bolt is run out if door is closed No functions Bolt is withdrawn No functions Copyright Abloy Oy Joensuu Factory 2004 08/2004

R DRILLING SCHEME EL614 EA300 EL615, 35 mm EA300 EL615, 25 mm EL615, 35 mm Copyright Abloy Oy Joensuu Factory 2004 7

INSTALLATION SCHEME EA300 STRIKE PLATE When using cage nuts 8410 MICRO SWITCH KEEP When using cage nuts Copyright Abloy Oy Joensuu Factory 2004 8

INSTALLATION SCHEME EUROPROFILE CYLINDERS THUMBTURN USAGE IS NOT ALLOWED. NOTE! A B A Direction B 45 Specified angle NOTE! CAM towards forend. Prohibited area Wrong CAM angle can block electrical use. Copyright Abloy Oy Joensuu Factory 2004 9

FOREND Forends for wooden door and for special profiles: - 25 mm backset: 807432-35 mm backset: 807431 Please note the drilling diagram of wooden door. Note! Short screw STRIKE PLATES EA300 803677 804811 Magnet 803711 (Please order separately) 10

11

Some of the materials in this product, such as electronic components, require specialist recycling techniques. Nimike Päiväys 952160 09/2004 STR/29.092004/FH11 www.abloy.com Abloy Oy Wahlforssinkatu 20 P.O. Box 108 FIN-808101 JOENSUU FINLAND Tel. +358 20 599 2501 Fax +358 20 599 2209 An ASSA ABLOY Group company ABLOY Oy is one of the leading manufacturers of locks, locking systems and architectural hardware and the world s leading developer of products in the field of electromechanical locking technology. The ASSA ABLOY Group is the world s leading manufacturer and supplier of locking solutions, dedicated to satisfying end-user needs for security, safety and convenience.