Copper Compression Metric Lugs and Splices

Compression Metric ugs and Splices Optimum reliability and safety With Metric s Worldwide availability RoHS compliant Standard barrel lugs and splices for copper class 2r rigid stranded conductor sizes mm 2 630mm 2, copper class 5f flexible stranded conductor sizes mm 2 300mm 2 and copper class 6f flexible stranded conductor sizes 10mm 2 20mm 2 Standard barrel lugs with 5 and 90 bent palms for copper class 2r rigid stranded conductor sizes 10mm 2 300 mm 2, copper class 5f flexible stranded conductor sizes 10mm 2 300mm 2 and copper class 6f flexible stranded conductor sizes 10mm 2 20mm 2 ong barrel lugs for copper class 2r rigid stranded conductor sizes 10mm 2 630mm 2, copper class 5f flexible stranded conductor sizes 10mm 2 300mm 2, and copper class 6f flexible stranded conductor sizes 10mm 2 20mm 2 Key Features and Benefits Product Information Marked on Connector for easy selection and installation 99.9% Pure and Tin Plated to a nominal thickness of 320μ in (8μ m) to provide a high quality connection Inspection Window for Standard Barrel ugs allows a visually verifiable, high quality crimp U isted or U Recognized and CSA Certified with Metric s allows specification to ensure safety and reliability Internally Beveled Wire Entry for fast and easy installation Rounded Tongue for One- ugs convenient for use in tight spaces www.panduit.com

System CMD 150 12 X CMA 150 12 H X Type CMD = Two- Standard Barrel ug, CMA = One- Standard Barrel ug, SCMS = Splice, CMDX = Two- Standard Barrel ug, and 6f CMAX = One- Standard Barrel ug, and 6f SCMSX = Splice, and 6f CMA-H = One- Standard Barrel 5 Bent ug, Class 2r, 5f and 6f CMA-F = One- Standard Barrel 90 Bent ug, Class 2r, 5f and 6f CMB = One- ong Barrel ug,, 5f and 6f CMC = Two- ong Barrel ug,, 5f and 6f * wire size for CMA-H, CMA-F, CMB and CMC lugs 150 = 150mm 2 * 12 = M12 Two Spacing No etter =.5mm CD = 22.0 25.0mm 00 = Blank Tongue Palm Angle H = 5 F = 90 No etter = Straight Rigid Stranded Metric, One-, Standard Barrel with Window ug 1 = 1 E = 20 3 = 3 Q = 25 5 = 5 = 50 6 = 6 C = 100 X = 10 B B N M INSPECTION WINDOW I INSPECTION WINDOW I and EN 61238-1:2003/IEC 61238-1:2003 Class B, sizes mm 2 20mm 2 Figure 1. One- Figure 2. Blank Tongue Figure No. Current Rating (Amps) ØI B M N Die Index No. CMA6-5-C* 1 6 30 M5 3.8 10.0 7.8 6.2 27.5 P10 100 CMA6-6-C* 1 6 30 M6 3.8 10.8 7.8 6.2 27.5 P10 100 CMA6-8-C* 1 6 30 M8 3.8 13.0 8.0 8.0 30.5 P10 100 CMA10-5-C 1 10 M5.5 11.0 9.8 6.0 30.8 P21 100 CMA10-6-C 1 10 M6.5 11.0 9.8 6.0 30.8 P21 100 CMA10-8-C 1 10 M8.5 13.0 8.5 8.0 30.8 P21 100 CMA10-10-C 1 10 M10. 1.5 8.5 8.0 30.8 P21 100 CMA16-5-C* 1 16 65 M5 5.5 13.0 10.3 6.5 3.5 P2 100 CMA16-6-C* 1 16 65 M6 5.5 13.0 10.3 6.5 3.5 P2 100 CMA16-8-C* 1 16 65 M8 5.5 13.0 10.3 6.5 3.5 P2 100 CMA16-10-C* 1 16 65 M10 5.5 15.0 10.2 8.0 36.7 P2 100 See page 16 for tool and die information. * U Recognized. 2

Rigid Stranded Metric, One-, Standard Barrel with Window ug (continued) Figure No. Current Rating (Amps) ØI B M N Die Index No. CMA25-6-C 1 25 M6 6.9 1.0 10.0 8.0 37.0 P29 100 CMA25-8-C 1 25 M8 6.9 15.5 10.0 8.0 37.0 P29 100 CMA25-10-C 1 25 M10 6.9 15.5 10.0 8.0 37.0 P29 100 CMA35-6-C 1 35 M6 8.2 15.5 12.3 8.5 2.0 P29 100 CMA35-8-C 1 35 M8 8.2 15.5 12.3 8.5 2.0 P29 100 CMA35-10-C 1 35 M10 8.2 15.5 12.3 8.5 2.0 P29 100 CMA35-12-C 1 35 M12 8.2 21.5 1.5 11.5 8.0 P29 100 CMA50-6- 1 50 M6 9.8 18.0 11.5 10.0 6.5 P37 50 CMA50-8- 1 50 M8 9.8 18.0 11.5 10.0 6.5 P37 50 CMA50-10- 1 50 M10 9.8 18.0 11.5 10.0 6.5 P37 50 CMA50-12- 1 50 M12 9.8 23.0 1.0 11.0 50.0 P37 50 CMA70-6- 1 70 M6 11.5 20.8 1.5 11.5 53.5 P5 50 CMA70-8- 1 70 M8 11.5 20.8 1.5 11.5 53.5 P5 50 CMA70-10- 1 70 M10 11.5 20.8 1.5 11.5 53.5 P5 50 CMA70-12- 1 70 M12 11.5 20.8 1.5 11.5 53.5 P5 50 CMA95-8- 1 95 M8 13.5 2.5 15.0 13.5 60.5 P5 50 CMA95-10- 1 95 M10 13.5 2.5 15.0 13.5 60.5 P5 50 CMA95-12- 1 95 M12 13.5 2.5 15.0 13.5 60.5 P5 50 CMA95-16- 1 95 M16 13.5 2.5 15.0 13.5 60.5 P5 50 CMA120-8- 1 120 M8 15.2 27.5 15.5 1.5 65.0 P62 50 CMA120-10- 1 120 M10 15.2 27.5 15.5 1.5 65.0 P62 50 CMA120-12- 1 120 M12 15.2 27.5 15.5 1.5 65.0 P62 50 CMA120-16- 1 120 M16 15.2 27.5 15.5 1.5 65.0 P62 50 CMA150-8-X 1 150 M8 16.5 30.5 18.0 16.5 70.5 P66 10 CMA150-10-X 1 150 M10 16.5 30.5 18.0 16.5 70.5 P66 10 CMA150-12-X 1 150 M12 16.5 30.5 18.0 16.5 70.5 P66 10 CMA150-16-X 1 150 M16 16.5 30.5 18.0 16.5 70.5 P66 10 CMA150-20-X 1 150 M20 16.5 30.5 22.0 16.5 7.0 P66 10 CMA185-10-X 1 185 M10 18.6 33.5 16.5 17.5 72.5 P76 10 CMA185-12-X 1 185 M12 18.6 33.5 16.5 17.5 72.5 P76 10 CMA185-16-X 1 185 M16 18.6 33.5 16.5 17.5 72.5 P76 10 CMA185-20-X 1 185 M20 18.6 33.5 21.0 17.5 77.0 P76 10 CMA20-10-X 1 20 M10 20.8 37.5 21.0 19.5 86.5 P87 10 CMA20-12-X 1 20 M12 20.8 37.5 21.0 19.5 86.5 P87 10 CMA20-16-X 1 20 M16 20.8 37.5 21.0 19.5 86.5 P87 10 CMA20-20-X 1 20 M20 20.8 37.5 21.0 19.5 86.5 P87 10 CMA300-10-5 1 300 M10 23.5 2.5 22.0 20.0 9.5 P9 5 CMA300-12-5 1 300 M12 23.5 2.5 22.0 20.0 9.5 P9 5 CMA300-16-5 1 300 M16 23.5 2.5 22.0 20.0 9.5 P9 5 CMA300-20-5 1 300 M20 23.5 2.5 22.0 20.0 9.5 P9 5 CMA00-12-5 1 00 M12 27.0 9.5 26.5 23.5 107.0 P106 5 CMA00-16-5 1 00 M16 27.0 9.5 26.5 23.5 107.0 P106 5 CMA00-20-5 1 00 M20 27.0 9.5 26.5 23.5 107.0 P106 5 CMA500-12-1 1 500 M12 31.0 57.5 28.5 25.5 120.0 P125 1 CMA500-16-1 1 500 M16 31.0 57.5 28.5 25.5 120.0 P125 1 CMA500-20-1 1 500 M20 31.0 57.5 28.5 25.5 120.0 P125 1 CMA500-00-1* 2 500 Blank 31.0 57.5 120.0 P125 1 CMA630-16-1 1 630 M16 3.5 63.0 28.5 27.5 131.0 P125 1 CMA630-20-1 1 630 M20 3.5 63.0 28.5 27.5 131.0 P125 1 CMA630-00-1* 2 630 Blank 3.5 63.0 131.0 P125 1 See page 16 for tool and die information. * U Recognized. 3

Rigid Stranded Metric, Two-, Standard Barrel with Window ug B B B N STUD HOE SPACING M N STUD HOE SPACING M INSPECTION WINDOW I INSPECTION WINDOW I INSPECTION WINDOW I Figure 1. Two- Figure 2. Two- Slotted Figure 3. Blank Tongue and EN 61238-1:2003/IEC 61238-1:2003 Class B, sizes mm 2 630mm 2 Figure No. Current Rating (Amps) Spacing ØI B M N Die Index No. CMD6-5CD-Q* 2 6 30 M5 22.0 25.0 3.8 10.0 7.8 6.2 52.5 P10 25 CMD10-6CD-Q 2 10 M6 22.0 25.0.5 11.0 9.8 6.0 55.8 P21 25 CMD10-8-Q 1 10 M8.5.5 13.0 8.5 8.0 75.3 P21 25 CMD10-00-Q* 3 10 Blank. 1.5 75.3 P21 25 CMD16-6CD-Q* 2 16 65 M6 22.0 25.0 5.5 13.0 10.3 6.5 59.5 P2 25 CMD16-8-Q* 1 16 65 M8.5 5.5 13.0 10.3 6.5 79.0 P2 25 CMD16-00-Q* 3 16 65 Blank 5.5 15.0 81.2 P2 25 CMD25-8CD-Q 2 25 M8 22.0 25.0 6.9 15.5 10.0 8.0 62.0 P29 25 CMD25-8-Q 1 25 M8.5 6.9 15.5 10.0 8.0 81.5 P29 25 CMD25-10-Q 1 25 M10.5 6.9 15.5 10.0 8.0 81.5 P29 25 CMD25-12-Q 1 25 M12.5 7.1 20.0 1.5 11.5 89.5 P29 25 CMD25-00-Q* 3 25 Blank 7.1 20.0 89.5 P29 25 CMD35-8CD-Q 2 35 M8 22.0 25.0 8.2 15.5 12.3 8.5 67.0 P29 25 CMD35-10-Q 1 35 M10.5 8.2 15.5 12.3 8.5 86.5 P29 25 CMD35-12-Q 1 35 M12.5 8.2 21.5 1.5 11.5 92.5 P29 25 CMD35-00-Q* 3 35 Blank 8.2 21.5 92.5 P29 25 CMD50-10CD-X 2 50 M10 22.0 25.0 9.8 18.0 11.5 10.0 71.5 P37 10 CMD50-10-X 1 50 M10.5 9.8 18.0 11.5 10.0 91.0 P37 10 CMD50-12-X 1 50 M12.5 9.8 23.0 1.0 11.0 9.5 P37 10 CMD50-00-X* 3 50 Blank 9.8 23.0 9.5 P37 10 CMD70-10CD-X 2 70 M10 22.0 25.0 11.5 20.5 1.5 11.0 78.5 P5 10 CMD70-10-X 1 70 M10.5 11.5 20.8 1.5 11.5 98.0 P5 10 CMD70-12-X 1 70 M12.5 11.5 20.8 1.5 11.5 98.0 P5 10 CMD70-00-X* 3 70 Blank 11.5 20.8 98.0 P5 10 CMD95-10CD-X 2 95 M10 22.0 25.0 13.5 2.5 15.0 13.0 85.5 P5 10 CMD95-12-X 1 95 M12.5 13.5 2.5 15.0 13.5 105.0 P5 10 CMD95-1-X 1 95 M1.5 13.5 2.5 15.0 13.5 105.0 P5 10 CMD95-00-X* 3 95 Blank 13.5 2.5 105.0 P5 10 CMD120-10CD-X 2 120 M10 22.0 25.0 15.2 27.5 15.5 1.0 90.0 P62 10 CMD120-12-X 1 120 M12.5 15.2 27.5 15.5 1.5 109.5 P62 10 CMD120-1-X 1 120 M1.5 15.2 27.5 15.5 1.5 109.5 P62 10 CMD120-00-X* 3 120 Blank 15.2 27.5 109.5 P62 10 CMD150-10CD-X 2 150 M10 22.0 25.0 16.5 30.5 18.0 16.0 95.5 P66 10 CMD150-12-X 1 150 M12.5 16.5 30.5 18.0 16.5 115.0 P66 10 CMD150-1-X 1 150 M1.5 16.5 30.5 22.0 16.5 118.5 P66 10 CMD150-00-X* 3 150 Blank 16.5 30.5 118.5 P66 10 CMD185-10CD-X 2 185 M10 22.0 25.0 18.6 33.5 16.5 17.0 97.5 P76 10 CMD185-12-X 1 185 M12.5 18.6 33.5 16.5 17.5 117.0 P76 10 CMD185-1-X 1 185 M1.5 18.6 33.5 21.0 17.5 121.5 P76 10 CMD185-00-X* 3 185 Blank 18.6 33.5 121.5 P76 10 CMD20-10CD-5 2 20 M10 22.0 25.0 20.8 37.5 21.0 19.0 111.5 P87 5 CMD20-12-5 1 20 M12.5 20.8 37.5 21.0 19.5 131.0 P87 5 CMD20-1-5 1 20 M1.5 20.8 37.5 21.0 19.5 131.0 P87 5 See page 16 for tool and die information. * U Recognized.

Rigid Stranded Metric, Two-, Standard Barrel with Window ug (continued) and EN 61238-1:2003/IEC 61238-1:2003 Class B, sizes mm 2 630mm 2 Figure No. Current Rating (Amps) Spacing ØI B M N Die Index No. CMD20-00-5* 3 20 Blank 20.8 37.5 131.0 P87 5 CMD300-12-5 1 300 M12.5 23.5 2.5 22.0 20.0 139.0 P9 5 CMD300-1-5 1 300 M1.5 23.5 2.5 22.0 20.0 139.0 P9 5 CMD300-00-5* 3 300 Blank 23.5 2.5 139.0 P9 5 CMD00-12-5 1 00 M12.5 27.0 9.5 26.5 23.5 151.5 P106 5 CMD00-1-5 1 00 M1.5 27.0 9.5 26.5 23.5 151.5 P106 5 CMD00-16-5 1 00 M16.5 27.0 9.5 26.5 23.5 151.5 P106 5 CMD00-00-5* 3 00 Blank 27.0 9.5 151.5 P106 5 CMD500-12-1 1 500 M12.5 31.0 57.5 28.5 25.5 16.5 P125 1 CMD500-1-1 1 500 M1.5 31.0 57.5 28.5 25.5 16.5 P125 1 CMD500-16-1 1 500 M16.5 31.0 57.5 28.5 25.5 16.5 P125 1 CMD500-00-1* 3 500 Blank 31.0 57.5 16.5 P125 1 CMD630-12-1 1 630 M12.5 3.5 63.0 28.5 27.5 175.5 P125 1 CMD630-1-1 1 630 M1.5 3.5 63.0 28.5 27.5 175.5 P125 1 CMD630-16-1 1 630 M16.5 3.5 63.0 28.5 27.5 175.5 P125 1 CMD630-00-1* 3 630 Blank 3.5 63.0 175.5 P125 1 See page 16 for tool and die information. * U Recognized. Rigid Stranded Metric, Standard Barrel, Butt Splice and EN 61238-1:2003/IEC 61238-1:2003 Class B, sizes 10mm 2 630mm 2 Current Rating (Amps) ØI Die Index No. SCMS10-C* 10 50.5 30.0 P21 100 SCMS16-C* 16 65 5.5 35.0 P2 100 SCMS25-25 6.9 36.0 P29 50 SCMS35-35 8.2 36.0 P29 50 SCMS50-50 9.8 9.0 P37 50 SCMS70-70 11.5 52.0 P5 50 SCMS95-Q 95 13.5 5.0 P5 25 SCMS120-Q 120 15.2 57.0 P62 25 SCMS150-X 150 16.5 57.0 P66 10 SCMS185-X 185 18.6 61.0 P76 10 SCMS20-X 20 20.8 72.0 P87 10 SCMS300-5 300 23.5 75.0 P9 5 SCMS00-5 00 27.0 95.0 P106 5 SCMS500-6 500 31.0 96.0 P125 6 SCMS630-6 630 3.5 131.0 P125 6 See page 16 for tool and die information. * U Recognized. 5

Flexible Stranded Metric, One-, Standard Barrel with Window ug B INSPECTION WINDOW I N M See page 17 for tool and die information. 6 ØI B M N CMAX6-5-C 6 M5 3.8 10.0 7.8 6.2 27.5 100 CMAX6-6-C 6 M6 3.8 10.8 7.8 6.2 27.5 100 CMAX6-8-C 6 M8 3.8 13.0 8.0 8.0 30.5 100 CMAX10-5-C 10 10 M5 5.5 13.0 10.3 6.5 3.5 100 CMAX10-6-C 10 10 M6 5.5 13.0 10.3 6.5 3.5 100 CMAX10-8-C 10 10 M8 5.5 13.0 10.3 6.5 3.5 100 CMAX10-10-C 10 10 M10 5.5 15.0 10.2 8.0 36.7 100 CMAX16-5-C 16 16 M5 6.9 1.0 10.0 8.0 37.0 100 CMAX16-6-C 16 16 M6 6.9 1.0 10.0 8.0 37.0 100 CMAX16-8-C 16 16 M8 6.9 15.5 10.0 8.0 37.0 100 CMAX16-10-C 16 16 M10 6.9 15.5 10.0 8.0 37.0 100 CMAX25-6-C 25 25 M6 8.2 15.5 12.3 8.5 2.0 100 CMAX25-8-C 25 25 M8 8.2 15.5 12.3 8.5 2.0 100 CMAX25-10-C 25 25 M10 8.2 15.5 12.3 8.5 2.0 100 CMAX35-6-C 35 35 M6 9.8 18.0 11.5 10.0 6.5 100 CMAX35-8-C 35 35 M8 9.8 18.0 11.5 10.0 6.5 100 CMAX35-10-C 35 35 M10 9.8 18.0 11.5 10.0 6.5 100 CMAX35-12-C 35 35 M12 9.8 23.0 1.0 11.0 50.0 100 CMAX50-6- 50 50 M6 11.5 20.8 1.5 11.5 53.5 50 CMAX50-8- 50 50 M8 11.5 20.8 1.5 11.5 53.5 50 CMAX50-10- 50 50 M10 11.5 20.8 1.5 11.5 53.5 50 CMAX50-12- 50 50 M12 11.5 20.8 1.5 11.5 53.5 50 CMAX70-6- 70 70 M6 13.5 2.5 15.0 13.5 60.5 50 CMAX70-8- 70 70 M8 13.5 2.5 15.0 13.5 60.5 50 CMAX70-10- 70 70 M10 13.5 2.5 15.0 13.5 60.5 50 CMAX70-12- 70 70 M12 13.5 2.5 15.0 13.5 60.5 50 CMAX95-8- 95 95 M8 15.2 27.5 15.5 1.5 65.0 50 CMAX95-10- 95 95 M10 15.2 27.5 15.5 1.5 65.0 50 CMAX95-12- 95 95 M12 15.2 27.5 15.5 1.5 65.0 50 CMAX95-16- 95 95 M16 15.2 27.5 15.5 1.5 65.0 50 CMAX120-8- 120 120 M8 16.5 30.5 18.0 16.5 70.5 50 CMAX120-10- 120 120 M10 16.5 30.5 18.0 16.5 70.5 50 CMAX120-12- 120 120 M12 16.5 30.5 18.0 16.5 70.5 50 CMAX120-16- 120 120 M16 16.5 30.5 18.0 16.5 70.5 50 CMAX150-8-X 150 150 M8 18.6 33.5 16.5 17.5 72.5 10 CMAX150-10-X 150 150 M10 18.6 33.5 16.5 17.5 72.5 10 CMAX150-12-X 150 150 M12 18.6 33.5 16.5 17.5 72.5 10 CMAX150-16-X 150 150 M16 18.6 33.5 16.5 17.5 72.5 10 CMAX150-20-X 150 150 M20 18.6 33.5 21.0 17.5 77.0 10 CMAX185-10-X 185 185 M10 20.8 37.5 21.0 19.5 86.5 10 CMAX185-12-X 185 185 M12 20.8 37.5 21.0 19.5 86.5 10 CMAX185-16-X 185 185 M16 20.8 37.5 21.0 19.5 86.5 10 CMAX185-20-X 185 185 M20 20.8 37.5 21.0 19.5 86.5 10 CMAX20-10-X 20 20 M10 23.5 2.5 22.0 20.0 9.5 10 CMAX20-12-X 20 20 M12 23.5 2.5 22.0 20.0 9.5 10 CMAX20-16-X 20 20 M16 23.5 2.5 22.0 20.0 9.5 10 CMAX20-20-X 20 20 M20 23.5 2.5 22.0 20.0 9.5 10 CMAX300-10-5 300 M10 26.2 8.0 26.5 23.5 107.0 5 CMAX300-12-5 300 M12 26.2 8.0 26.5 23.5 107.0 5 CMAX300-16-5 300 M16 26.2 8.0 26.5 23.5 107.0 5 CMAX300-20-5 300 M20 26.2 8.0 26.5 23.5 107.0 5

Flexible Stranded Metric, Two-, Standard Barrel with Window ug B N STUD HOE SPACING M INSPECTION WINDOW I Figure 1. Two- Figure 2. Two- Slotted Figure 3. Blank Tongue Figure No. Spacing ØI B M N CMDX6-5CD-Q 2 6 M5 22.0 25.0 3.8 10.0 7.8 6.2 52.5 25 CMDX10-8-Q 1 10 10 M8.5 5.5 13.0 10.3 6.5 79.0 25 CMDX10-6CD-Q 2 10 10 M6 22.0 25.0 5.5 13.0 10.3 6.5 59.5 25 CMDX10-00-Q 3 10 10 Blank 5.5 15.0 81.2 25 CMDX16-8-Q 1 16 16 M8.5 6.9 15.5 10.0 8.0 81.5 25 CMDX16-6CD-Q 2 16 16 M6 22.0 25.0 6.9 1.0 10.0 8.0 62.0 25 CMDX16-00-Q 3 16 16 Blank 7.1 20.0 89.5 25 CMDX25-8-Q 1 25 25 M8.5 8.2 15.5 12.3 8.5 86.5 25 CMDX25-10-Q 1 25 25 M10.5 8.2 15.5 12.3 8.5 86.5 25 CMDX25-12-Q 1 25 25 M12.5 8.2 21.5 1.5 11.5 92.5 25 CMDX25-8CD-Q 2 25 25 M8 22.0 25.0 8.2 15.5 12.3 8.5 67.0 25 CMDX25-00-Q 3 25 25 Blank 8.2 21.5 92.5 25 CMDX35-10-Q 1 35 35 M10.5 9.8 18.0 11.5 10.0 91.0 25 CMDX35-12-Q 1 35 35 M12.5 9.8 23.0 1.0 11.0 9.5 25 CMDX35-8CD-Q 2 35 35 M8 22.0 25.0 9.8 18.0 11.5 10.0 71.5 25 CMDX35-00-Q 3 35 35 Blank 9.8 23.0 9.5 25 CMDX50-10-X 1 50 50 M10.5 11.5 20.8 1.5 11.5 98.0 10 CMDX50-12-X 1 50 50 M12.5 11.5 20.8 1.5 11.5 98.0 10 CMDX50-10CD-X 2 50 50 M10 22.0 25.0 11.5 20.5 1.5 11.5 78.5 10 CMDX50-00-X 3 50 50 Blank 11.5 20.8 98.0 10 CMDX70-10-X 1 70 70 M10.5 13.5 2.5 15.0 13.5 105.0 10 CMDX70-12-X 1 70 70 M12.5 13.5 2.5 15.0 13.5 105.0 10 CMDX70-10CD-X 2 70 70 M10 22.0 25.0 13.5 2.5 15.0 13.5 85.5 10 CMDX70-00-X 3 70 70 Blank 13.5 2.5 105.0 10 CMDX95-12-X 1 95 95 M12.5 15.2 27.5 15.5 1.5 109.5 10 CMDX95-1-X 1 95 95 M1.5 15.2 27.5 15.5 1.5 109.5 10 CMDX95-10CD-X 2 95 95 M10 22.0 25.0 15.2 27.5 15.5 1.5 90.0 10 CMDX95-00-X 3 95 95 Blank 15.2 27.5 109.5 10 CMDX120-12-X 1 120 120 M12.5 16.5 30.5 18.0 16.5 115.0 10 CMDX120-1-X 1 120 120 M1.5 16.5 30.5 22.0 16.5 118.5 10 CMDX120-10CD-X 2 120 120 M10 22.0 25.0 16.5 30.5 18.0 16.5 95.5 10 CMDX120-00-X 3 120 120 Blank 16.5 30.5 118.5 10 CMDX150-12-X 1 150 150 M12.5 18.6 33.5 16.5 17.5 117.0 10 CMDX150-1-X 1 150 150 M1.5 18.6 33.5 21.0 17.5 121.5 10 CMDX150-10CD-X 2 150 150 M10 22.0 25.0 18.6 33.5 16.5 17.5 97.5 10 CMDX150-00-X 3 150 150 Blank 18.6 33.5 121.5 10 CMDX185-12-X 1 185 185 M12.5 20.8 37.5 21.0 19.5 131.0 10 CMDX185-1-X 1 185 185 M1.5 20.8 37.5 21.0 19.5 131.0 10 CMDX185-10CD-X 2 185 185 M10 22.0 25.0 20.8 37.5 21.0 19.5 111.5 10 CMDX185-00-X 3 185 185 Blank 20.8 37.5 131.0 10 CMDX20-12-5 1 20 20 M12.5 23.5 2.5 22.0 20.0 139.0 5 CMDX20-1-5 1 20 20 M1.5 23.5 2.5 22.0 20.0 139.0 5 CMDX20-10CD-5 2 20 20 M10 22.0 25.0 23.5 2.5 22.0 20.0 119.5 5 CMDX20-00-5 3 20 20 Blank 23.5 2.5 139.0 5 CMDX300-12-5 1 300 M12.5 26.2 8.0 26.5 23.5 151.5 5 CMDX300-1-5 1 300 M1.5 26.2 8.0 26.5 23.5 151.5 5 CMDX300-00-5 3 300 Blank 26.2 8.0 151.5 5 See page 17 for tool and die information. 7

Flexible Stranded Metric, Standard Barrel, Butt Splice See page 17 for tool and die information. SCMSX10-C 10 10 5.5 35.0 100 SCMSX16-C 16 16 6.9 9.0 100 SCMSX25-25 25 8.2 36.0 50 SCMSX35-35 35 9.8 9.0 50 SCMSX50-50 50 11.5 57.0 50 SCMSX70-70 70 13.5 5.0 50 SCMSX95-Q 95 95 15.2 57.0 25 SCMSX120-Q 120 120 16.5 57.0 25 SCMSX150-X 150 150 18.6 61.0 10 SCMSX185-X 185 185 20.8 72.0 10 SCMSX20-X 20 20 23.5 75.0 10 SCMSX300-5 300 26.2 95.0 5 Rigid and Flexible Stranded Metric, One-, Standard Barrel with Window ug, 5 Angle ØI B N F CMA 50-12H 50r/35f M Inspection Window 5 I F Identifier CMA 50-12H 50r/35f Rigid and Flexible Stranded s Marked on Part and EN 61238-1:2003/IEC 61238-1:2003 Class B, sizes 10mm 2 20mm 2 8 /6f^ ØI B M N CMA10-5H-C 10 M5.5 11.0 9.8 6.0 27.6 100 CMA10-6H-C 10 M6.5 11.0 9.8 6.0 27.6 100 CMA10-8H-C 10 M8.5 13.0 8.5 8.0 27.7 100 CMA10-10H-C 10 M10. 1.5 8.5 8.0 28.0 100 CMA16-5H-C 16 10 M5 5.5 13.0 10.3 6.5 30. 50 CMA16-6H-C 16 10 M6 5.5 13.0 10.3 6.5 30. 100 CMA16-8H-C 16 10 M8 5.5 13.0 10.3 6.5 30.3 100 CMA16-10H-C 16 10 M10 5.5 15.0 10.2 8.0 32.3 100 CMA25-6H-C 25 16 M6 6.9 1.0 10.0 8.0 31.8 100 CMA25-8H-C 25 16 M8 6.9 15.5 10.0 8.0 31.8 100 CMA25-10H-C 25 16 M10 6.9 15.5 10.0 8.0 31.7 100 See page 18 for tool and die information. * conductor only. ^Not CE compliant and not tested to EN 61238-1:2003/IEC 61238-1:2003 for terminations with metric or flexible stranded conductor.

Rigid and Flexible Stranded Metric, One-, Standard Barrel with Window ug, 5 Angle (continued) and EN 61238-1:2003/IEC 61238-1:2003 Class B, sizes 10mm 2 20mm 2 /6f^ ØI B M N CMA35-6H-C 35 25 M6 8.2 15.5 12.3 8.5 36.7 100 CMA35-8H-C 35 25 M8 8.2 15.5 12.3 8.5 36.7 100 CMA35-10H-C 35 25 M10 8.2 15.5 12.3 8.5 36.7 100 CMA35-12H-C 35 25 M12 8.2 21.5 1.5 11.5 2.1 100 CMA50-6H- 50 35 M6 9.8 18.0 11.5 10.0 0.1 50 CMA50-8H- 50 35 M8 9.8 18.0 11.5 10.0 0.1 50 CMA50-10H- 50 35 M10 9.8 18.0 11.5 10.0 0.1 50 CMA50-12H- 50 35 M12 9.8 23.0 1.0 11.0 3.1 50 CMA70-6H- 70 50 M6 11.5 20.8 1.5 11.5 6.8 50 CMA70-8H- 70 50 M8 11.5 20.8 1.5 11.5 6.8 50 CMA70-10H- 70 50 M10 11.5 20.8 1.5 11.5 6.8 50 CMA70-12H- 70 50 M12 11.5 20.8 1.5 11.5 6.7 50 CMA95-8H- 95 70 M8 13.5 2.5 15.0 13.5 52.6 50 CMA95-10H- 95 70 M10 13.5 2.5 15.0 13.5 52.6 50 CMA95-12H- 95 70 M12 13.5 2.5 15.0 13.5 52.6 50 CMA95-16H- 95 70 M16 13.5 2.5 15.0 13.5 52.5 50 CMA120-8H- 120 95 M8 15.2 27.5 15.5 1.5 56.6 50 CMA120-10H- 120 95 M10 15.2 27.5 15.5 1.5 56.6 50 CMA120-12H- 120 95 M12 15.2 27.5 15.5 1.5 56.6 50 CMA120-16H- 120 95 M16 15.2 27.5 15.5 1.5 56.6 50 CMA150-8H-X 150 120 M8 16.5 30.5 18.0 16.5 6.7 10 CMA150-10H-X 150 120 M10 16.5 30.5 18.0 16.5 6.7 10 CMA150-12H-X 150 120 M12 16.5 30.5 18.0 16.5 6.7 10 CMA150-16H-X 150 120 M16 16.5 30.5 18.0 16.5 6.6 10 CMA150-20H-X 150 120 M20 16.5 30.5 22.0 16.5 68.3 10 CMA185-10H-X 185 150 M10 18.6 33.5 16.5 17.5 66.0 10 CMA185-12H-X 185 150 M12 18.6 33.5 16.5 17.5 66.0 10 CMA185-16H-X 185 150 M16 18.6 33.5 16.5 17.5 66.0 10 CMA185-20H-X 185 150 M20 18.6 33.5 21.0 17.5 70.5 10 CMA20-10H-X 20 185 M10 20.8 37.5 21.0 19.5 79.3 10 CMA20-12H-X 20 185 M12 20.8 37.5 21.0 19.5 79.3 10 CMA20-16H-X 20 185 M16 20.8 37.5 21.0 19.5 79.3 10 CMA20-20H-X 20 185 M20 20.8 37.5 21.0 19.5 79.3 10 CMA300-10H-5 300 20 M10 23.5 2.5 22.0 20.0 85.5 5 CMA300-12H-5 300 20 M12 23.5 2.5 22.0 20.0 82.5 5 CMA300-16H-5 300 20 M16 23.5 2.5 22.0 20.0 85.5 5 CMA300-20H-5 300 20 M20 23.5 2.5 22.0 20.0 85. 5 CMAX300-10H-5^ 300* M10 26.2 8.0 26.5 23.5 98. 5 CMAX300-12H-5^ 300* M12 26.2 8.0 26.5 23.5 98. 5 CMAX300-16H-5^ 300* M16 26.2 8.0 26.5 23.5 98. 5 CMAX300-20H-5^ 300* M20 26.2 8.0 26.5 23.5 98. 5 See page 18 for tool and die information. * conductor only. ^Not CE compliant and not tested to EN 61238-1:2003/IEC 61238-1:2003 for terminations with metric or flexible stranded conductor. 9

Rigid and Flexible Stranded Metric, One-, Standard Barrel with Window ug, 90 Angle Identifier B N F CMA 50-12F 50r/35f M Inspection Window 90 I F CMA 50-12F 50r/35f Rigid and Flexible Stranded s Marked on Part and EN 61238-1:2003/IEC 61238-1:2003 Class B, sizes 10mm 2 20mm 2 /6f^ ØI B M N CMA10-5F-C 10 M5.5 11.0 9.8 6.0 2.5 100 CMA10-6F-C 10 M6.5 11.0 9.8 6.0 2.5 100 CMA10-8F-C 10 M8.5 13.0 8.5 8.0 25.2 100 CMA10-10F-C 10 M10. 1.5 8.5 8.0 26.2 100 CMA16-5F-C 16 10 M5 5.5 13.0 10.3 6.5 26.5 100 CMA16-6F-C 16 10 M6 5.5 13.0 10.3 6.5 26.5 100 CMA16-8F-C 16 10 M8 5.5 13.0 10.3 6.5 26.5 100 CMA16-10F-C 16 10 M10 5.5 15.0 10.2 8.0 27.9 100 CMA25-6F-C 25 16 M6 6.9 1.0 10.0 8.0 29.9 100 CMA25-8F-C 25 16 M8 6.9 15.5 10.0 8.0 29.3 100 CMA25-10F-C 25 16 M10 6.9 15.5 10.0 8.0 29.9 100 CMA35-6F-C 35 25 M6 8.2 15.5 12.3 8.5 3.7 100 CMA35-8F-C 35 25 M8 8.2 15.5 12.3 8.5 3.7 100 CMA35-10F-C 35 25 M10 8.2 15.5 12.3 8.5 3.7 100 CMA35-12F-C 35 25 M12 8.2 21.5 1.5 11.5 0.0 100 CMA50-6F- 50 35 M6 9.8 18.0 11.5 10.0 38. 50 CMA50-8F- 50 35 M8 9.8 18.0 11.5 10.0 38. 50 CMA50-10F- 50 35 M10 9.8 18.0 11.5 10.0 38. 50 CMA50-12F- 50 35 M12 9.8 23.0 1.0 11.0 1.9 50 CMA70-6F- 70 50 M6 11.5 20.8 1.5 11.5 2.3 50 CMA70-8F- 70 50 M8 11.5 20.8 1.5 11.5 2.3 50 CMA70-10F- 70 50 M10 11.5 20.8 1.5 11.5 2.3 50 CMA70-12F- 70 50 M12 11.5 20.8 1.5 11.5 2.3 50 CMA95-8F- 95 70 M8 13.5 2.5 15.0 13.5 50.1 50 CMA95-10F- 95 70 M10 13.5 2.5 15.0 13.5 50.1 50 CMA95-12F- 95 70 M12 13.5 2.5 15.0 13.5 50.1 50 CMA95-16F- 95 70 M16 13.5 2.5 15.0 13.5 50.1 50 CMA120-8F- 120 95 M8 15.2 27.5 15.5 1.5 5.2 50 CMA120-10F- 120 95 M10 15.2 27.5 15.5 1.5 5.2 50 CMA120-12F- 120 95 M12 15.2 27.5 15.5 1.5 5.2 50 CMA120-16F- 120 95 M16 15.2 27.5 15.5 1.5 5.2 50 CMA150-8F-X 150 120 M8 16.5 30.5 18.0 16.5 60.5 10 CMA150-10F-X 150 120 M10 16.5 30.5 18.0 16.5 60.5 10 CMA150-12F-X 150 120 M12 16.5 30.5 18.0 16.5 60.5 10 CMA150-16F-X 150 120 M16 16.5 30.5 18.0 16.5 60.5 10 CMA150-20F-X 150 120 M20 16.5 30.5 22.0 16.5 6.5 10 CMA185-10F-X 185 150 M10 18.6 33.5 16.5 17.5 62.0 10 CMA185-12F-X 185 150 M12 18.6 33.5 16.5 17.5 62.0 10 CMA185-16F-X 185 150 M16 18.6 33.5 18.5 17.5 6.0 10 CMA185-20F-X 185 150 M20 18.6 33.5 21.0 17.5 66.5 10 CMA20-10F-X 20 185 M10 20.8 37.5 21.0 19.5 71.5 10 CMA20-12F-X 20 185 M12 20.8 37.5 21.0 19.5 71.5 10 CMA20-16F-X 20 185 M16 20.8 37.5 21.0 19.5 71.5 10 CMA20-20F-X 20 185 M20 20.8 37.5 21.0 19.5 71.5 10 See page 18 for tool and die information. * conductor only. ^Not CE compliant and not tested to EN 61238-1:2003/IEC 61238-1:2003 for terminations with metric or flexible stranded conductor. 10

Rigid and Flexible Stranded Metric, One-, Standard Barrel with Window ug, 90 Angle (continued) and EN 61238-1:2003/IEC 61238-1:2003 Class B, sizes 10mm 2 20mm 2 /6f^ ØI B M N CMA300-10F-5 300 20 M10 23.5 2.5 22.0 20.0 77.3 5 CMA300-12F-5 300 20 M12 23.5 2.5 22.0 20.0 77.3 5 CMA300-16F-5 300 20 M16 23.5 2.5 22.0 20.0 77.3 5 CMA300-20F-5 300 20 M20 23.5 2.5 22.0 20.0 77.3 5 CMAX300-10F-5^ 300* M10 26.2 8.0 26.5 23.5 88.0 5 CMAX300-12F-5^ 300* M12 26.2 8.0 26.5 23.5 88.0 5 CMAX300-16F-5^ 300* M16 26.2 8.0 26.5 23.5 88.0 5 CMAX300-20F-5^ 300* M20 26.2 8.0 26.5 23.5 88.0 5 See page 18 for tool and die information. * conductor only. ^Not CE compliant and not tested to EN 61238-1:2003/IEC 61238-1:2003 for terminations with metric or flexible stranded conductor. Rigid and Flexible Stranded Metric, One-, ong Barrel ug, No Window Identifier Rigid and Flexible Stranded s Marked on Part and EN 61238-1:2003/IEC 61238-1:2003 Class B, sizes 10mm 2 20mm 2 /6f^ ØI B M N CMB10-5- 10 M5.5 11.0 9.8 6.0 3.8 50 CMB10-6- 10 M6.5 11.0 9.8 6.0 3.8 50 CMB10-8- 10 M8.5 13.0 8.5 8.0 3.8 50 CMB10-10- 10 M10. 1.5 8.5 8.0 3.8 50 CMB16-5- 16 10 M5 5.5 13.0 10.3 6.5 7.2 50 CMB16-6- 16 10 M6 5.5 13.0 10.3 6.5 7.2 50 CMB16-8- 16 10 M8 5.5 13.0 10.3 6.5 7.2 50 CMB16-10- 16 10 M10 5.5 15.0 10.2 8.0 9. 50 CMB25-6- 25 16 M6 6.9 1.0 10.0 8.0 8.7 50 CMB25-8- 25 16 M8 6.9 15.5 10.0 8.0 8.7 50 CMB25-10- 25 16 M10 6.9 15.5 10.0 8.0 8.7 50 CMB35-6-Q 35 25 M6 8.2 15.5 12.3 8.5 57.3 25 CMB35-8-Q 35 25 M8 8.2 15.5 12.3 8.5 57.3 25 CMB35-10-Q 35 25 M10 8.2 15.5 12.3 8.5 57.3 25 CMB35-12-Q 35 25 M12 8.2 21.5 1.5 11.5 63.3 25 CMB50-6-E 50 35 M6 9.8 18.0 11.5 10.0 62.8 20 CMB50-8-E 50 35 M8 9.8 18.0 11.5 10.0 62.8 20 CMB50-10-E 50 35 M10 9.8 18.0 11.5 10.0 62.8 20 CMB50-12-E 50 35 M12 9.8 23.0 1.0 11.0 66.3 20 CMB70-8-X 70 50 M8 11.5 20.8 1.5 11.5 68.2 10 CMB70-10-X 70 50 M10 11.5 20.8 1.5 11.5 68.2 10 CMB70-12-X 70 50 M12 11.5 20.8 1.5 11.5 68.2 10 See page 19 for tool and die information. * conductor only. ^Not CE compliant and not tested to EN 61238-1:2003/IEC 61238-1:2003 for terminations with metric or flexible stranded conductor. 11

Rigid and Flexible Stranded Metric, One-, ong Barrel ug, No Window (continued) and EN 61238-1:2003/IEC 61238-1:2003 Class B, sizes 10mm 2 20mm 2 /6f^ ØI B M N CMB95-8-X 95 70 M8 13.5 2.5 15.0 13.5 79.0 10 CMB95-10-X 95 70 M10 13.5 2.5 15.0 13.5 79.0 10 CMB95-12-X 95 70 M12 13.5 2.5 15.0 13.5 79.0 10 CMB95-16-X 95 70 M16 13.5 2.5 15.0 13.5 79.0 10 CMB120-8-X 120 95 M8 15.2 27.5 15.5 1.5 80.2 10 CMB120-10-X 120 95 M10 15.2 27.5 15.5 1.5 80.2 10 CMB120-12-X 120 95 M12 15.2 27.5 15.5 1.5 80.2 10 CMB120-16-X 120 95 M16 15.2 27.5 15.5 1.5 80.2 10 CMB150-8-X 150 120 M8 16.5 30.5 18.0 16.5 100.0 10 CMB150-10-X 150 120 M10 16.5 30.5 18.0 16.5 100.0 10 CMB150-12-X 150 120 M12 16.5 30.5 18.0 16.5 100.0 10 CMB150-16-X 150 120 M16 16.5 30.5 18.0 16.5 100.0 10 CMB150-20-X 150 120 M20 16.5 30.5 22.0 16.5 103.5 10 CMB185-10-X 185 150 M10 18.6 33.5 16.5 17.5 100.6 10 CMB185-12-X 185 150 M12 18.6 33.5 16.5 17.5 100.6 10 CMB185-16-X 185 150 M16 18.6 33.5 16.5 17.5 100.6 10 CMB185-20-X 185 150 M20 18.6 33.5 21.0 17.5 105.1 10 CMB20-10-6 20 185 M10 20.8 37.5 21.0 19.5 115.0 6 CMB20-12-6 20 185 M12 20.8 37.5 21.0 19.5 115.0 6 CMB20-16-6 20 185 M16 20.8 37.5 21.0 19.5 115.0 6 CMB20-20-6 20 185 M20 20.8 37.5 21.0 19.5 115.0 6 CMB300-10-6 300 20 M10 23.5 2.5 22.0 20.0 122.6 6 CMB300-12-6 300 20 M12 23.5 2.5 22.0 20.0 122.6 6 CMB300-16-6 300 20 M16 23.5 2.5 22.0 20.0 122.6 6 CMB300-20-6 300 20 M20 23.5 2.5 22.0 20.0 122.6 6 CMBX300-10-6^ 300* M10 26.2 8.0 26.5 23.5 135.2 6 CMBX300-12-6^ 300* M12 26.2 8.0 26.5 23.5 135.2 6 CMBX300-16-6^ 300* M16 26.2 8.0 26.5 23.5 135.2 6 CMBX300-20-6^ 300* M20 26.2 8.0 26.5 23.5 135.2 6 CMB00-12-6 00 M12 27.0 9.5 26.5 23.5 127. 6 CMB00-16-6 00 M16 27.0 9.5 26.5 23.5 127. 6 CMB00-20-6 00 M20 27.0 9.5 26.5 23.5 127. 6 CMB500-12-3 500 M12 31.0 57.5 28.5 25.5 19.7 3 CMB500-16-3 500 M16 31.0 57.5 28.5 25.5 19.7 3 CMB500-20-3 500 M20 31.0 57.5 28.5 25.5 19.7 3 CMB630-16-3 630 M16 3.5 63.0 28.5 27.5 159.1 3 CMB630-20-3 630 M20 3.5 63.0 28.5 27.5 159.1 3 See page 19 for tool and die information. * conductor only. ^Not CE compliant and not tested to EN 61238-1:2003/IEC 61238-1:2003 for terminations with metric or flexible stranded conductor. 12

Rigid and Flexible Stranded Metric, Two-, ong Barrel ug, No Window Identifier Figure 1. Two- and EN 61238-1:2003/IEC 61238-1:2003 Class B, sizes 10mm 2 630mm 2 Figure 2. Blank Tongue Rigid and Flexible Stranded s Marked on Part Figure No. /6f^ Spacing ØI B M N CMC10-00- 2 10 Blank. 1.5 87.8 50 CMC10-8- 1 10 M8.5.5 13.0 8.5 8.0 87.8 50 CMC16-00- 2 16 10 Blank 5.5 15.0 93.9 50 CMC16-8- 1 16 10 M8.5 5.5 13.0 10.3 6.5 91.7 50 CMC25-00- 2 25 16 Blank 7.1 20.0 101.2 50 CMC25-8- 1 25 16 M8.5 6.9 15.5 10.0 8.0 93.2 50 CMC25-10- 1 25 16 M10.5 6.9 15.5 10.0 8.0 93.2 50 CMC25-12- 1 25 16 M12.5 7.1 20.0 1.5 11.5 101.2 50 CMC35-00-Q 2 35 25 Blank 8.2 21.5 107.8 25 CMC35-10-Q 1 35 25 M10.5 8.2 15.5 12.3 8.5 101.8 25 CMC35-12-Q 1 35 25 M12.5 8.2 21.5 1.5 11.5 107.8 25 CMC50-00-E 2 50 35 Blank 9.8 23.0 110.8 20 CMC50-10-E 1 50 35 M10.5 9.8 18.0 11.5 10.0 107.3 20 CMC50-12-E 1 50 35 M12.5 9.8 23.0 1.0 11.0 110.8 20 CMC70-00-X 2 70 50 Blank 11.5 20.8 112.7 10 CMC70-10-X 1 70 50 M10.5 11.5 20.8 1.5 11.5 112.7 10 CMC70-12-X 1 70 50 M12.5 11.5 20.8 1.5 11.5 112.7 10 CMC95-00-X 2 95 70 Blank 13.5 2.5 123.5 10 CMC95-12-X 1 95 70 M12.5 13.5 2.5 15.0 13.5 123.5 10 CMC95-1-X 1 95 70 M1.5 13.5 2.5 15.0 13.5 123.5 10 CMC120-00-X 2 120 95 Blank 15.2 27.5 12.7 10 CMC120-12-X 1 120 95 M12.5 15.2 27.5 15.5 1.5 12.7 10 CMC120-1-X 1 120 95 M1.5 15.2 27.5 15.5 1.5 12.7 10 CMC150-00-X 2 150 120 Blank 16.5 30.5 18.0 10 CMC150-12-X 1 150 120 M12.5 16.5 30.5 18.0 16.5 1.5 10 CMC150-1-X 1 150 120 M1.5 16.5 30.5 22.0 16.5 18.0 10 CMC185-00-X 2 185 150 Blank 18.6 33.5 19.6 10 CMC185-12-X 1 185 150 M12.5 18.6 33.5 16.5 17.5 15.1 10 CMC185-1-X 1 185 150 M1.5 18.6 33.5 21.0 17.5 19.6 10 CMC20-00-6 2 20 185 Blank 20.8 37.5 159.5 6 CMC20-12-6 1 20 185 M12.5 20.8 37.5 21.0 19.5 159.5 6 CMC20-1-6 1 20 185 M1.5 20.8 37.5 21.0 19.5 159.5 6 CMC300-00-6 2 300 20 Blank 23.5 2.5 167.1 6 CMC300-12-6 1 300 20 M12.5 23.5 2.5 22.0 20.0 167.1 6 CMC300-1-6 1 300 20 M1.5 23.5 2.5 22.0 20.0 167.1 6 CMCX300-00-6^ 2 300* Blank 26.2 8.0 179.7 6 CMCX300-12-6^ 1 300* M12.5 26.2 8.0 26.5 23.5 179.7 6 CMCX300-1-6^ 1 300* M1.5 26.2 8.0 26.5 23.5 179.7 6 CMC00-00-6 2 00 Blank 27.0 9.5 171.9 6 CMC00-12-6 1 00 M12.5 27.0 9.5 26.5 23.5 171.9 6 CMC00-1-6 1 00 M1.5 27.0 9.5 26.5 23.5 171.9 6 CMC00-16-6 1 00 M16.5 27.0 9.5 26.5 23.5 171.9 6 CMC500-00-3 2 500 Blank 31.0 57.5 19.2 3 CMC500-12-3 1 500 M12.5 31.0 57.5 28.5 25.5 19.2 3 CMC500-1-3 1 500 M1.5 31.0 57.5 28.5 25.5 19.2 3 CMC500-16-3 1 500 M16.5 31.0 57.5 28.5 25.5 19.2 3 CMC630-00-3 2 630 Blank 3.5 63.0 203.6 3 CMC630-12-3 1 630 M12.5 3.5 63.0 28.5 27.5 203.6 3 CMC630-1-3 1 630 M1.5 3.5 63.0 28.5 27.5 203.6 3 CMC630-16-3 1 630 M16.5 3.5 63.0 28.5 27.5 203.6 3 See page 19 for tool and die information. * conductor only. ^Not CE compliant and not tested to EN 61238-1:2003/IEC 61238-1:2003 for terminations with metric or flexible stranded conductor. 13

Agency Approved Terminations with Rigid Stranded Metric s termination system for stranded metric conductors ensures safety and reliability by meeting these Standards: U 86A-86B Wire Connectors and Soldering ugs CSA C22.2 No. 65-03 Wire Connectors EN 61238-1:2003/IEC 61238-1:2003 Class B (mm 2 630mm 2 ) Steps to Achieve Example: Circumferential Crimp Die System 1. Components + + + Connector Rigid Stranded Metric Dies Tool 2. Crimped Connection Applying Crimp Crimped ug Top View Die Index Numbers Crimped ug Cross Section 3. Static Heating Sequence Wire Secureness Test ong-term dependability in applications with moving equipment Static Heating Test Safe connection at rated current Wire Pullout Test Secure connection under static tensile loads Connector 50 C MAX Connector 1 2 A Rotating Bushing Weight Ambient Temperature Highest Measure Temperature Test Current Weight Connectors 1

Agency Approved Terminations with and 6f Flexible Stranded Metric s termination system for flexible metric conductors ensures safety and reliability by meeting these Standards: U 86A-86B Wire Connectors and Soldering ugs CSA C22.2 No. 65-03 Wire Connectors Steps to Achieve Example: Nest/Indenter Die System (Refer to page 1 for example of Circumferential Crimp Die System) 1. Components + + + + Connector or 6f Flexible Metric Bottom Nest Die Top Indenter Die Tool 2. Crimped Connection Applying Crimp Crimped ug Bottom View Crimped ug Top View Crimped ug Cross Section 3. Static Heating Sequence Wire Secureness Test ong-term dependability in applications with moving equipment Static Heating Test Safe connection at rated current Wire Pullout Test Secure connection under static tensile loads Connector 50 C MAX Connector 1 2 A Rotating Bushing Weight Ambient Temperature Highest Measure Temperature Test Current Weight Connectors 15

Tool and Die Selection Chart for Standard Barrel Straight Metric ugs and Splices with CMA6 CMD6 CMA10 CMD10 SCMS10 CMA16 CMD16 SCMS16 CMA25 CMD25 SCMS25 CMA35 CMD35 SCMS35 CMA50 CMD50 SCMS50 CMA70 CMD70 SCMS70 CMA95 CMD95 SCMS95 CMA120 CMD120 SCMS120 CMA150 CMD150 SCMS150 CMA185 CMD185 SCMS185 CMA20 CMD20 SCMS20 CMA300 CMD300 SCMS300 CMA00 CMD00 SCMS00 CMA500 CMD500 SCMS500 CMA630 CMD630 SCMS630 ^ Wire Strip ength Current Rating -6 11.0 11.0 30A 10 12.5 12.5 16.5 16 16.0 16.0 19.0 25 16.5 16.5 19.5 35 19.0 19.0 19.5 50 21.8 21.8 26.0 70 2.8 2.8 27.5 95 26.0 26.0 28.5 120 26.0 26.0 30.0 150 29.0 29.0 30.0 185 29.7 29.7 32.0 20 36.5 36.5 37.5 300 1.8 1.8 39.0 00 6.3 6.3 9.0 500 8.0 8.0 9.5 630 57.7 57.7 67.0 50A 65A CT-100 22-10 CT-200, CT-1570 CT-600 CT-1701 12-10 CT-2001, CT-2002 CT-3001, CT-3001/E, Die Color Code and Index Number (Number of Crimps) CT-570CH 12-10 P10 CD-2001-8 CD-2001-6 Blue P2 CD-2001- CD-2001- CD-2001-1 CD-2001-2/0 Black P5 CD-2001-/0 Purple P5 CD-2001-250 Yellow P62 CD-2001-300 White P66 CD-2001-00 CD-2001-500 Brown P87 *CD-920 dies can be used with the CT-90CH and CT-290 tools with the CD-90-DA adapter. **CD-90 dies to be used exclusively with CT-90CH and CT-290 tools. ^ Rigid Stranded Metric Per DIN VDE 0295, IEC 60228 and HD 383. CE Approved crimp tool. CT-2931, CT-930, CT-930CH, CT-2930, CT-2930/, CT-2930/E, CT-90CH*, CT-290*, CT-290/*, CT-290/E* CD-920-8 CD-920-6 Blue P2 CD-920- CD-920- CD-920-1 CD-920-2/0 Black P5 CD-920-/0 Purple P5 CD-920-250 Yellow P62 CD-920-300 White P66 CD-920-00 CD-920-500 Brown P87 CD-920-600 Green P9 CD-920-750 CD-90-750** Black P106 CD-90-1000** White P125 CD-90-1000** White P125 () How to read this chart For CMA630 lug and CT-290/ crimping tool: CST11-157 Ergonomic Wire Stripper Provides circular, spiral, and in-line insulation cutting without knives to reduce injuries For wires 3/16" (.76mm) to 1 9/16" (39.7mm) diameter Die Color Code Die CD-90-1000 White P125 () Number of Crimps Die Index Number 16

Tool and Die Selection Chart for Standard Barrel Straight Metric ugs and Splices with and 6f s CMAX6 CMDX6 CMAX10 CMDX10 SCMSX10 CMAX16 CMDX16-6 10 Class^ Wire Strip ength 11.0 11.0 16.0 16.0 19.0 16.5 16.5 CT-100 22-10 CT-200, CT-1570 CT-600 CT-1701 Pocket Number (Number of Crimps) 12-10 CT-570 12-10 P10 CT-2001, CT-2002, CT-3001, CT-3001/E Die Part Number Color Code and Index Number (Number of Crimps) CD-2001-8 CD-2001-8 CT-2931, CT-930, CT-930CH, CT-2930, CT-2930/, CT-2930/E, CT-90CH**, CT-290**, CT-290/**, CT-290/E** Bottom Nest Die Color Code, Index Number Top Indenter Die Part Number Index Number Crimps Per Connector Nest/ Indenter Dies CD-920-NEST 16 CD-920-NEST SCMSX16 26.0 CD-2001-8 CMAX25 25 19.0 CD-2001- CD-920-1/0NEST CMDX25 19.0 Pink P2 SCMSX25 19.5 CMAX35 CMDX35 SCMSX35 CMAX50 CMDX50 SCMSX50 CMAX70 CMDX70 SCMSX70 CMAX95 CMDX95 35 50 70 21.8 21.8 26.0 2.8 2.8 30.0 26.0 26.0 28.5 26.0 26.0 CD-2001-2 Brown P33 CD-2001-1 CD-2001-2/0 Black P5 CD-2001-3/0 Orange P50 CD-920-3/0NEST Orange P50 CD-920-3/0NEST Orange P50 CD-920-250NEST Yellow P62 CD-920-00NEST 95 SCMSX95 30.0 CD-2001-3/0 Orange P50 CMAX120 120 29.0 CD-920-00NEST CMDX120 29.0 SCMSX120 30.0 CMAX150 CMDX150 SCMSX150 CMAX185 CMDX185 SCMSX185 CMAX20 CMDX20 SCMSX20 CMAX300 CMDX300 SCMSX300 150 185 20 300 29.7 29.7 32.0 36.5 36.5 37.5 1.8 1.8 9.0 6.3 6.3 9.0 CD-920-00NEST CD-920-500NEST Brown P87 CD-920-750NEST Black P106 CD-920-300MXNST P32 **CD-920 and CDI-920 dies can be used with CT-90CH and CT-290 tools with CD-90-DA adapter. ^ and 6f Flexible Stranded Metric Per DIN VDE 0295, IEC 60228 and HD 383. CE Approved crimp tool. Nest die must be used in conjunction with specified indenter die. CDI-920-10 1 CDI-920-10 1 CDI-920-2 2 CDI-920-2 2 CDI-920-2 2 CDI-920-8 CDI-920-8 CDI-920-8 CDI-920-8 CDI-920-8 CDI-920-60 6 CDI-920-60 6 17

Tool and Die Selection Chart for Standard Barrel 5 and 90 Bent Palm Metric ugs with, 5f and 6f Part Number CMA10-H CMA10-F CMA16-H CMA16-F CMA25-H CMA25-F CMA35-H CMA35-F CMA50-H CMA50-F CMA70-H CMA70-F CMA95-H CMA95-F CMA120-H CMA120-F Wire Strip ength and Class^ 12.5 10 16.0 16 16.5 25 19.0 35 21.8 50 2.8 70 26.0 95 26.0 120 CT-2001 CT-2002 CT-3001, CT-3001/E CT-2931 CT-930 CT-930CH CT-2930 CT-2930/, CT-2930/E, CT-90CH*, CT-290*, CT-290/*, CT-290/E* Crimp Tools and Dies for Rigid Stranded Die Color Code and Index Number (Number of Crimps) CD-2001-8 CD-2001-8 CD-2001- CD-2001- CD-2001-1 CD-2001-2/0 Black P5 CD-2001-/0 Purple P5 CD-2001-250 Yellow P62 CD-920-8 CD-920-8 CD-920- CD-920- CD-920-1 CD-920-2/0 Black P5 CD-920-/0 Purple P5 CD-920-500 Yellow P62 and Class^ CT-2001 CT-2002 CT-3001, CT-3001/E CT-2931 CT-930 CT-930CH CT-2930, CT-2930/, CT-2930/E, CT-90CH* CT-290*, CT-290/*, CT-290/E* Die Color Code and Index Number (Number of Crimps) Crimp Tools and Dies for Flexible Stranded CT-2931 CT-930 CT-930CH CT-2930, CT-2930/, CT-2930/E CT-90CH*, CT-290*, CT-290/*, CT-290/E* Bottom Nest Die Color Color and Index Number Top Indenter Die Index Number Crimps Per Connector Nest/ Indenter Dies 10 16 25 35 50 70 95 CD-920-8 CD-920-8 CD-2001- CD-2001-2 Brown P33 CD-2001-1 CD-2001-2/0 Black P5 CD-2001-3/0 Orange P50 CD-920-8 CD-920-8 CD-920- CD-920-2 Brown P33 CD-920-1 CD-920-2/0 Black P5 CD-920-3/0 Orange P50 CD-920-NEST CD-920-NEST CD-920-1/0NEST Pink P2 CD-920-3/0NEST Orange P50 CD-920-3/0NEST Orange P50 CD-920-250NEST Yellow P62 CD-920-00NEST CDI-920-10 1 CDI-920-10 1 CDI-920-2 2 CDI-920-2 2 CDI-920-2 2 CDI-920-8 CDI-920-8 CMA150-H CMA150-F 29.0 150 CD-2001-300 White P66 CD-920-300 White P66 120 CD-920-00NEST CDI-920-8 CMA185-H CMA185-F 29.7 185 CD-2001-00 CD-920-00 150 CD-920-00NEST CDI-920-8 CMA20-H CMA20-F 36.5 20 CD-2001-500 Brown P87 CD-920-500 Brown P87 185 CD-920-500NEST Brown P87 CDI-920-8 CMA300-H CMA300-F CMAX300-H CMAX300-F 1.8 300 CD-920-600 Green P9 20 6.3 300 CD-920-750NEST Black P106 CD-920-300MXNST P32 CDI-920-60 6 CDI-920-60 6 *CD-920 and CDI-920 dies can be used with CT-90CH and CT-290 tools with CD-90-DA die adapter. ^ Rigid Stranded Metric and and 6f Flexible Stranded Metric Per DIN VDE 0295, IEC 60228 and HD 383. CE Approved crimp tool. Nest die must be used in conjunction with specified indenter die. 18

Tool and Die Selection Chart for ong Barrel Straight Metric ugs with, 5f and 6f Part Number CMB10 CMC10 CMB16 CMC16 CMB25 CMC25 CMB35 CMC35 CMB50 CMC50 CMB70 CMC70 CMB95 CMC95 CMB120 CMC120 CMB150 CMC150 CMB185 CMC185 CMB20 CMC20 CMB300 CMC300 CMBX300 CMCX300 Wire Strip ength and Class^ 25.6 10 28.8 16 28.3 25 3. 35 38.2 50 39.6 70.6 95 1.3 120 58.6 150 57.9 185 65.1 20 70.0 300 CT-2001 CT-2002 CT-3001, CT-3001/E CT-2931 CT-930 CT-930CH CT-2930 CT-2930/, CT-2930/E, CT-90CH*, CT-290*, CT-290/*, CT-290/E* Crimp Tools and Dies for Rigid Stranded Die Color Code and Index Number (Number of Crimps) CD-2001-8 CD-2001-8 CD-2001- CD-2001- CD-2001-1 CD-2001-2/0 Black P5 CD-2001-/0 Purple P5 CD-2001-250 Yellow P62 CD-2001-300 White P66 CD-2001-00 CD-2001-500 Brown P87 CD-920-8 CD-2001-8 CD-920- CD-920- CD-920-1 CD-920-2/0 Black P5 CD-920-/0 Purple P5 CD-920-250 Yellow P62 CD-920-300 White P66 CD-920-00 CD-920-500 Brown P87 CD-920-600 Green P9 and Class^ CT-2001 CT-2002 CT-3001, CT-3001/E CT-2931 CT-930 CT-930CH CT-2930, CT-2930/, CT-2930/E, CT-90CH* CT-290*, CT-290/*, CT-290/E* Die Color Code and Index Number (Number of Crimps) CT-2931 CT-930 CT-930CH CT-2930, CT-2930/, CT-2930/E CT-90CH*, CT-290*, CT-290/*, CT-290/E* Crimp Tools and Dies for Flexible Stranded Bottom Nest Die Color Code, Index Number Top Indenter Die Part Number Index Number Crimps Per Connector Nest/ Indenter Dies 10mm² 16mm² 25mm² 35mm² 50mm² 70mm² 95mm² 120mm² 150mm² 185mm² 20mm² 7.6 300mm² CD-2001-8 CD-2001-8 CD-2001- CD-2001-2 Brown P33 CD-2001-1 CD-2001-2/0 Black P5 CD-2001-3/0 Orange P50 CD-920-8 CD-920-8 CD-920- CD-920-2 Brown P33 CD-920-1 CD-920-2/0 Black P5 CD-920-3/0 Orange P50 CD-920-250NEST Yellow P62 CD-920-00NEST CD-920-00NEST CD-920-00NEST CD-920-500NEST Brown P87 CD-920-750NEST Black P106 CD-920-300MXNST P32 CDI-920-8 CDI-920-8 CDI-920-8 CDI-920-8 CDI-920-8 CDI-920-60 6 CDI-920-60 6 CMB00 CMC00 CMB500 CMC500 CMB630 CMC630 66.8 00 77.8 500 85.9 630 CD-920-750 CD-90-750** Black P106 CD-90-1000** White P125 () CD-90-1000** White P125 (5) 1000 kcmil Class G CD-90-750A** Red P125 CD-90-1000** White P125 *CD-920 and CDI-920 dies can be used with CT-90CH and CT-290 tools with CD-90-DA die adapter. **CD-90 dies to be used exclusively with CT-90CH and CT-290 tools. ^ Rigid Stranded Metric and and 6f Flexible Stranded Metric Per DIN VDE 0295, IEC 60228 and HD 383. CE Approved crimp tool. Nest die must be used in conjunction with specified indenter die. 19

Complete Solutions from s lithium-ion battery powered, hydraulic crimping tools provide more crimps per charge and a faster crimp cycle to significantly improve productivity and save labor cost. CT-3001/E In-ine Crimping Tool CT-2930/E Crimping Tool CT-290/E Crimping Tool 5 Kn (6 ton) output Provided with two Milwaukee M18 XC high capacity RED lithium-ion 18VDC rechargeable batteries, one Milwaukee 230 VAC battery charger, and heavy-duty bag 12.5 Kn (1 ton) output Provided with two Milwaukee M18 XC high capacity RED lithium-ion 18VDC rechargeable batteries, one Milwaukee 230 VAC battery charger, shoulder strap, and heavy-duty bag 136 Kn (15 ton) output Provided with two Milwaukee M18 XC high capacity RED lithium-ion 18VDC rechargeable batteries, one Milwaukee 230 VAC battery charger, shoulder strap, and plastic tool case For complete tool information please visit: www.panduit.com/lithium-iontools offers comprehensive innovative solutions to optimize the connecting, routing, bundling, protecting, and identification of the physical infrastructure for lower total cost of ownership. Power Connectors Grounding Solutions Terminals and Ferrules Wiring Duct Cable Ties Stainless Steel System Abrasion Protection Identification and Safety WORDWIDE SUBSIDIARIES AND SAES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: 800.777.3300 PANDUIT EUROPE TD. ondon, UK cs-emea@panduit.com Phone:.20.8601.7200 PANDUIT SINGAPORE PTE. TD. Republic of Singapore cs-ap@panduit.com Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: 81.3.6863.6000 PANDUIT ATIN AMERICA Guadalajara, Mexico cs-la@panduit.com Phone: 52.33.3777.6000 PANDUIT AUSTRAIA PTY. TD. Victoria, Australia cs-aus@panduit.com Phone: 61.3.979.9020 For a copy of product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800.777.3300 201 Corp. A RIGHTS RESERVED. PCCB13--WW-ENG 6/201