Entry 3 Level 1 At Rotherham College, we offer a range of courses and Apprenticeships in the following areas: Motor vehicle craft Mechanical engineering craft /electronic engineering craft General engineering Whichever course you choose you will be trained using industry grade equipment in newly built labs and workshops which also includes our state of the art automated process control area. We have highly skilled tutors with many years of industrial experience who are here to support you and prepare you for a successful career in engineering. This is an Entry Level course in motor vehicle which enables students to gain hands on practical experience of basic motor vehicle systems. Improve maths and English grades Level 1 You will be required to successfully complete an interview with a course tutor where you must be able to commitment to this. This is a Level 1 course in motor vehicle which enables students to gain both practical competence and underpinning knowledge of Improve maths and English grades Working in a modern motor vehicle facility Intermediate Apprenticeship GCSE Maths and English at grade E to F 78 Further information: www.rotherham.ac.uk or 01709 722777 79
Intermediate Apprenticeship in Motor Vehicle Advanced Apprenticeship in Vehicle Maintenance Building on from the Level 1 course students will gain further knowledge and competence of Intermediate Apprenticeship in Motor Vehicle GCSE maths and English at grade D or above Building on from the course students will gain advanced knowledge and competence of Routine servicing and maintenance Improve maths and English to GCSE grade C or above Advanced Apprenticeship in Vehicle Maintenance GCSE Maths The Intermediate Apprenticeship will be covered over a two year period. With this Apprenticeship you are gaining the skills and experience needed to progress into a career as a motor vehicle mechanic. It provides the basic level of competence and knowledge to perform tasks to industry standards. Functional Skills: English, maths, ICT rights and responsibilities Personal, learning and thinking skills Our College has a proven track record within Advanced Apprenticeship in Motor Vehicle. GCSE English and maths, grades A D (or equivalent) You must be employed within the motor vehicle commitment to this programme The Advanced Apprenticeship will be covered over a two year period. The Advanced Apprenticeship provides the level of competence and knowledge to perform tasks to advanced industry standards. Functional Skills: English, maths, ICT rights and responsibilities Personal, learning and thinking skills Our College has a proven track record within At present we do not offer progression from, but we are working closely with awarding bodies to develop a Level 4 qualification to meet the needs of our learners. GCSE English and maths, grades A D (or equivalent) complete a skills assessment, be employed within the industrial and be able to meet the entry criteria 80 Further information: www.rotherham.ac.uk or 01709 722777 81
PEO NVQ Diploma General Technology Diploma Technology Diploma Mechanical Technology Diploma Fabrication and Welding A broad based introduction to engineering covering electrical, mechanical and fabrication and welding. Following on from the PEO NVQ this Following on from the PEO NVQ this Following on from the PEO NVQ this Working safely Working efficiently and effectively Using technical information Producing components using hand fitting techniques MIG welding processes Wiring and testing electrical equipment Assembly and testing electronic circuits Intermediate Apprenticeship in Students can choose to specialise and study the Diploma in in one of three areas: Mechanical engineering /electronic engineering Fabrication and welding GCSE maths and English at grade D or above techniques principles and electronic principles installation methods testing and fault diagnosis Intermediate Apprenticeship in Technology Diploma part-time GCSE maths techniques principles maintenance procedures Turning and milling techniques CNC turning techniques Intermediate Apprenticeship in Technology Diploma part-time (maintenance or manufacturing) GCSE maths techniques principles Fabrication and welding principles Manual welding techniques Producing components from metal plate Intermediate Apprenticeship in Technology Diploma part-time (fabrication and welding) GCSE maths 82 Further information: www.rotherham.ac.uk or 01709 722777 83
Diploma (90 Credit) This is the recommended course for anyone wishing to go on and study engineering in Higher Education/university. It is equivalent to 1.5 GCE A Level. Maths for technicians drawing Health and safety Mechanical principles /electronic principles Business materials Electronics maths/science Progression guidance in Higher Education (UCAS etc) Advanced Apprenticeship in Extended Diploma in (equivalent to three A Levels) Five GCSEs grade A* to C to include maths, English and science Intermediate Apprenticeship in The Intermediate Apprenticeship will be covered over a two year period. With this Apprenticeship you will gain the skills and experience needed to progress into a career as an electrical or mechanical engineer. It provides the basic level of competence and knowledge to perform tasks to industry standards. Training consists of both practical and theory assessment Year 1 will follow the PEO pathway Year 2 will follow the Diploma in Technology pathway Pathways are dependent on discipline (electrical, mechanical, fabrication and welding) Functional Skills: English, maths and ICT ERR PLTS Our College has a proven track record with Advanced Apprenticeship in GCSE English and maths grades A* D (or equivalent) You must be employed within the engineering commitment to this Advanced Apprenticeship in The Advanced Apprenticeship will be covered over a two year period. It provides the level of competence and knowledge to perform tasks to advanced industry standards. NVQ3 work based (electrical, mechanical or fabrication and welding) Diploma in (electrical, mechanical or fabrication and welding) Functional Skills: English, maths and ICT ERR PLTS Our College has a proven track record with Level 4 HNC in /Electronic Level 4 HNC in Mechanical Successful completion of Intermediate Apprenticeship in GCSE English and maths at (or equivalent) You must be employed within the engineering commitment to their 84 Further information: www.rotherham.ac.uk or 01709 722777 85
Part-time Courses Day PEO NVQ Diploma PEO NVQ Diploma Machining PEO NVQ Diploma Fabrication and Welding EAL Diploma Technology Manufacturing C&G Diploma Maintenance C&G Diploma Part-time Courses Evening Manual Metal Arc MIG TIG For full course information, visit www.rotherham.ac.uk/adultcourses or call 01709 722777 for advice Fabrication and Welding C&G Diploma Mechanical BTEC Subsidiary Diploma (60 credits) BTEC Diploma (120 credits) Manufacturing BTEC Diploma Metallurgy (120 credits) I would recommend Rotherham College to other students. I have received all the support I have needed to progress. I am enjoying my time at the College. Mark Allen Diploma Mark decided to do the Diploma at Rotherham College after studying at Aston Academy. During his time at the College he has developed a passion for engineering drawing which is a key skill for anyone wanting to progress within the engineering industry. Mark is currently enjoying taking part in the Discover STEM programme at the University of Sheffield where he is getting a feel for university life before going once he completes his course at College. 86 87