BEYER & MÜLLER HEILIGENHAUS Locks and door furniture
This catalogue is made especially for ironmongery shops, manufacturers of steel and wooden doors, planers and architects. With this target group we address people with certain specialist knowledge. All item descriptions are thoroughfully made and represent the status at the time the catalogue has been issued. For mistakes witch occur however or print faults we can not take any liability. We reserve ourselves always the right for technical changes. Catalogue: PDF version As at 2009 2009 Beyer & Müller GmbH & Co. KG Beyer & Müller GmbH & Co KG Design: J R Design, Jutta Reichenstein
Index C HAPTER 01 MORTISE LOCKS FOR WOODEN DOORS AND ACCESSORIES 2 Mortise lock 2 R/L Mortise lock Mortise lock 1 Mortise latch 1 Dead bolt lock 11 Swing door lock 790/796 Mortise Security lock Mustang Mortise lock LOCKS FOR SLIDING DOORS 162 Lock for sliding doors 16 Counter lock case 16 1/2 Pull for sliding doors 168 Lock for sliding doors 171 Lock for sliding doors 172 Lock for sliding doors 1004 Lock for sliding doors 1006 Heavy duty lock for sliding doors 40 Lock for sliding doors STRIKING PLATES S01 S0 S06 S07 S08 S09 S0 S1 S4 S5 S6 S7 S8 S40 S42 KEYS A A4 C HAPTER 02 Striking plate for interior doors Striking plate for interior doors Flat striking plate for interior doors Flat striking plate for interior doors Angled striking plate for interior doors 1.0 Angled striking plate for interior doors 1.0 Angled striking plate Angled striking plate Flat striking plate Flat striking plate Flat striking plate Flat striking plate Flat striking plate Flat striking plate Flat striking plate Key for warded locks Foldable key for warded locks MORTISE LOCKS FOR BUILDINGS AND ACCESSORIES 00 Lock for buildings 500 Heavy duty lock for building 1017 Mortise lock designed for two cylinders 1099 Senior citizens lock Meisterstück Lock for interior doors in buildings 1.2 1. 1.5 1.9 1.10 1.11 1. 1.4 1.20 1.21 1.22 1.2 1. 1.25 1.26 1.27 1.28 1.29 1.29 1.0 1.0 1.2 1.2 1. 1. 1. 1. 1.4 1.4 1.4 1.42 1.42 2.1 2. 2.6 2.4 2.2 C HAPTER 0 LOCKS FOR FIRE PROTECTION DOORS 1000 Mortise lock 1000 STA Mortise lock designed for top and bottom locking system 1005 Mortise lock 1001 mortise latch lock 1002 Mortise deadbolt 100 Mortise swing door lock 1004 Mortise sliding door lock 10 Mortise latch lock 1015 Mortise lock designed for two cylinders 1020 Master lock for latch locking system 100 Mortise slave latch for latch locking system 101 Master lock for latch locking system 10 Dead bolt for latch locking system 1044 Mortise lock 1099 Senior citizens lock PANIC LOCKS 800 Panic lock 801 Panic lock with automatic blocking latch bolt 810 Panic lock 10 PZW Panic lock 10 PZ Panic lock 10 STA-PZW Panic lock designed for top and bottom locking system 10 STA-PZ Panic lock designed for top and bottom locking system 1019 PZW Panic lock designed for two cylinders 1019 PZ Panic lock designed for two cylinders 1022 Master panic lock for latch locking system 102 Panic lock 10 slave lock 1027 Panic master lock for latch locking system 1028 Panic lock 104 Panic master lock for latch locking system 105 Panic master lock for latch locking system 1040 Panic Dead bolt 10.67.70.68.71.72.7.74.75.76.77.78.79.81.69.82.8.85.84.86.87.88.89.90.91.92.9.94.97.98.99.100.101 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de 0.1
Index 11 PZW Panic lock 11 PZ Panic lock 12 Panic master lock for latch locking system 18 Panic lock 40 Panic lock 40 Panic lock 4028 Panic lock 60 Panic lock 60 Panic lock 6028 Panic lock 6800 Panic lock 6801 Panic lock 61 Panic lock 61 Panic lock 68 Panic lock NON-HANDED LOCKS 179 Special mortise lock 189 Mortise lock B 82 Special mortise lock 1758 Special mortise lock 1759 Special mortise lock 1778 Special mortise lock B82 Panik PZW security panic lock B82 Panik PZ security panic lock LOCKS DESIGNED FOR TOP LOCKING SYSTEM 000 Mortise lock designed for top locking system 0 PZW Mortise panic lock designed for top locking system 0 PZ Mortise panic lock designed for top locking system 028 Mortise panic lock designed for top locking system 1 PZW Mortise panic lock designed for top locking system 1 PZ Mortise panic lock designed for top locking system 8 Mortise panic lock designed for top locking system 40 Mortise panic lock designed for top locking system 40 Mortise panic lock designed for top locking system 4028 Mortise panic lock designed for top locking system.10.104.105.106.1.2..107.108.109.110.111.1.1.1.115.118.116.119.0.1.2..4.5.6.7.8.9.0.1.2. 15 manual secured panic keep.8 16 Automatic secured panic keep dead bolt only -.9 17 Manually secured panic keep dead bolt -.9 11 Switching lock.5 1150 Deflecting lock.2 1155 Flush bolt. 60 Panic keep.4 ACCESSORIES 1100 Bottom shoot bolt.6 1101 Top shoot bolt.6 1102 Spring-loaded shoot bolt for locking.8 110 Spring-loaded shoot bolt for locking.9 1104 Top shoot bolt.7 1105 Connecting bar.150 1106 Connecting bar.151 1107 Latch retracting block.151 1108 Connecting bar. 1109 Spring-loaded shoot bolt.150 Floor strike.7 Shoot bolt striking plate.152 14 Shoot bolt guide.154 15 Striking plate.155 16 Striking plate.155 17 Spring-loaded tubular mortise latch.157 18 Striking plate.156 19 Spring-loaded floor keep.152 1165 Striking plate.156 1178 Striking plate.158 1192 Floor sleeve.15 1195 Tubular mortise latch.159 1196 Spring-loaded tubular mortise latch.160 C HAPTER 04 Instructions for using BMH locks and door handles 4.1 LOCKS FOR THE INACTIVE DOOR LEAF 10 Automatic panic keep 11 Manual panic keep Manual panic keep 1 Manual panic keep dead bolt only - 14 Automatic secured panic keep.4.5.6.6.7 0.2 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
M ORTISE L OCKS FOR W OODEN D OORS AND A CCESSORIES 1.
BMH Mortise Lock Security-relevant features according to DIN 18251 class No. 2 Faceplate Case Latch bolt Dead bolt Follower Striking plate 55 mm silver finish enclosed, zinc-coated zinc die-cast zinc die-cast 8 mm none 1. BB PZW Bad : warded lock with 1 key no. A and double throw dead bolt : lock for profile cylinder with latch and double throw dead bolt : lock for bathroom doors, centres 78 mm and single throw dead bolt e.g. stainless steel faceplate TGL 5 44 98 8 25 55 4.5 (1.5) 10 2 46 5 50 22 11 154 8 29 20 (18) 8 21.5 72.2 6.2.5 220.8* 6.8 5.5 18.5 *5.5 for customised position of dead bolt Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de 1. 2
BMH Mortise Lock for left-hand and right-hand mount No. 2 R/L Faceplate Case Latch bolt Dead bolt Follower Striking plate 1. 55 mm silver finish enclosed, zinc-coated zinc die-cast zinc die-cast 8 mm none BB : warded lock with 1 key no. A and double throw dead bolt PZW : lock for profile cylinder with latch and double throw dead bolt Bad : lock for bathroom doors, centres 78 mm and single throw dead bolt e.g. stainless steel 5.5 10 A* 44 25 5 51.5 0 22 11 ò8 8 21.5 8 72 98 154.5 5.5 (2.5) 5.75 7.75 (4.75) 55 28 20 (18) 20.5 4 A*Lever to switch from DIN left-hand to DIN right-hand and vice versa 1. Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Mortise Lock Security-relevant features according to DIN 18251 class Mustang Faceplate Case Latch bolt Dead bolt Follower Striking plate 55 mm silver finish enclosed, zinc-coated, screw-on steel, zinc-coated steel, zinc-coated 8 mm none 1. BB : warded lock with 1 key no. A and double throw dead bolt PZW : lock for profile cylinder with latch and double throw dead bolt Bad : lock for bathroom doors, centres 78 mm and single throw dead bolt e.g. stainless steel faceplate TGL 5 10 44 25 5 50 2 154.5 5.5 4.5 (1.5) 8 46 98 22 11 8 21.5 72.2 6.2 220.8* 6.8 55 29 20 18 (18) *5.5 for customised position of dead bolt.5 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de 1. 4
BMH Mortise Lock DIN 18251 class No. Faceplate Case Latch bolt Dead bolt Follower Striking plate 1. 55 mm silver finish enclosed, 55, 60, and 65 mm backset, zinc-coated open, 50 and 70 150 mm backset, zinc-coated zinc die-cast zinc die-cast 8 mm none BB : warded lock with 1 key no. A and double throw dead bolt PZW : lock for profile cylinder with latch and double throw dead bolt Bad : lock for bathroom doors, centres 78 mm and single throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) and double throw dead bolt Available s 55-150 mm e.g. stainless steel faceplate inclined faceplate 25 65 5 98 10 2 50 22 11 ò8 46 21.5 165.2 6.2 5 8 72.8* 6.8 8 20 (18) 4(1) 15.5 *5.5 for customised position of dead bolt Shows DIN left-hand DIN right-hand is reverse 1. 5 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Mortise Latch No. 1 Faceplate Latch bolt Follower Striking plate 55 mm silver finish steel, zinc-coated 8 mm Available s 55-100 mm with S 0 1. e.g. inclined faceplate stainless steel faceplate 2 49 94 10 7.5 160 4 2 ò 8 21.5 46 85.2 6.2 8 (7.5) 20 20(18) 4 1 10 15.5 15.5 (18) Shows DIN left-hand 10 DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de 1. 9
BMH Dead Bolt Lock No. 1 Faceplate Case Dead bolt Striking plate 1. 55 mm silver finish zinc-coated steel, zinc-coated with S 4 or S 5 BB : warded lock with 1 key no. A and double throw dead bolt PZ : lock for profile cylinder and double throw dead bolt Bad : lock for bathroom doors, 8 mm follower and single throw dead bolt Available s 55-100 mm e.g. stainless steel faceplate inclined faceplate 60 22 11 95 7.5 160 4 5 85 PZ 8 8 4.75 5.75 7.75 2 18 20 BB 95 BAD/WC 101 8 8 2 10 5.5 10 20.5 10 18 2.5 8 ò 8 2 1. 10 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
A BMH BMH Swing Door Lock Case dimensions according to DIN 18 251 No. 11 Faceplate Case Latch bolt Dead bolt 55 mm silver finish zinc-coated brass roller bolt, zinc-coated steel, zinc-coated Available s 50-100 mm 1. BB : warded lock with 1 key Nr. A and double throw dead bolt PZ : lock for profile cylinder and double throw dead bolt K : lock for Kaba or Keso cylinder and double throw dead bolt e.g. stainless steel faceplate Adjustable between 4 16 mm 5 50.5 8 18 25 22 11 67.5 17 165 48 6 8 50.5 5 16 2 15 A = adjusting screw for latch bo 2 Adjustable between 2.5 mm 25 A 8 54.5 4.5 46 5 22 11 46 21.5 98 165 5 8 72 2 20 15 A = adjusting screw for latch bolt Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de 1. 11
BMH Mortise Security Lock with security latch bolt No. 790 No. 796 1. N R. 790 Faceplate Case Latch bolt Dead bolt Follower 55 mm stainless steel enclosed, steel, zinc-coated steel, zinc-coated 9 mm zinc-coated Striking plate none Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0116 2007 EN:2004 M 5 1 0 F H C 2 0 EN N R. 796 Faceplate Case Latch bolt Dead bolt Follower Striking plate 65 mm stainless steel enclosed, zinc-coated steel, zinc-coated steel, zinc-coated 10 mm none PZW : lock for profile cylinder with latch and double throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) and double throw dead bolt e.g. also as Panic Lock No. 791 or 792 (interior doors), or No. 797 or 798 (exterior doors) with 9 mm follower and transit function D or transmission function E No. 790 with 8 mm follower instead of 9 mm (without EN certification) ó DESCRIPTION This lock has an additional security latch bolt above the normal latch bolt. If normal locks are not secured with a dead bolt, they can be easily opened by pushing back the latch bolt using basic tools. Such techniques cannot be used on this lock as the security latch bolt triggers an automatic blocking mechanism which prevents the main latch from being pushed in. 1. Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Mortise Security Lock with security latch bolt No. 790 No. 796 Nr. 790 5 5 8 11 11 1. 25 98 5 50 2 22 11 ò 9 8 21.5 46 72 165.2 6.2.8* 6.8 8 4(1) (20) (18) 15.5 *5.5 for customised position of dead bolt Shows DIN left-hand DIN right-hand is reverse Nr. 796 65.5 280 254 ò10 185.8* 6.8 8.2 8 110.5 47.5 50.5 1111 5 70 2 22 11 8 46 21.5 92.2 6.2 8.2 (22,20) (28) 1 4 (6) 15.5 15.5 (22) 28 (20) () *5.5 for customised position of dead bolt Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de 1.
BMH Lock for Sliding Doors with hook bolt and pull handle No. 162 1. Faceplate Case Hook bolt Pull handle Button 55 mm 20, mm silver finish zinc-coated zinc die-cast, nickel-plated zinc die-cast, nickel-plated zinc die-cast, nickel-plated Striking plate S 6 or S 7, silver finish BB A : warded lock with 1 key no. A BB A4 : warded lock with 1 key no. A4 PZ : lock for profile cylinder Bad : lock for bathroom doors and 8 mm follower Available s 55-80 mm e.g stainless steel faceplate Gap between faceplate and striking plate max. mm 61 50 28 5 10 21 PZ 8 99 8 165 45 9 Button 20 255 9 20 () 10 0 0 10 0 10 99 BB BAD/WC KABA/KESO 8 8 8 8 o8 107 6 101 0 0 0 1. 20 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
A BMH BMH Counter Lock Case with pull handle No. 16 Faceplate Case Pull Button 20, mm silver finish zinc-coated zinc die-cast, nickel-plated zinc die-cast, nickel-plated 1. e.g. stainless steel faceplate 45 20 10 9 20 50 20() 10 4 20 60 11 165 10 20 255 A = Button Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de 1. 21
BMH Pull Handle for Sliding Doors No. 16 1/2 Faceplate Case Pull handle Button 1. 20, mm silver finish zinc-coated zinc die-cast, nickel-plated zinc die-cast, nickel-plated e.g. stainless steel faceplate 72 50 1 45 5.5 9 20 10 A 20 151 80 20 () 10 20 10 A = Button 1. 22 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Lock for Sliding Doors with hook bolt No. 168 Faceplate Case Hook bolt Striking plate 55 mm 20, mm silver finish zinc-coated zinc die-cast, nickelplated S 6 or S 7, silver finish 1. Available s BB A : warded lock with 1 key Nr. A BB A4 : warded lock with 1 key Nr. A4 PZ : lock for profile cylinder Bad : lock for bathroom doors and 8 mm follower 55-80 mm e.g. stainless steel faceplate Distance from faceplate to the striking plate max. mm 56 26.5 29.5 94 5.5 8 95 15.5 5 151 10 21 8 0 20() 94 100 8 8 8 9 15.5 PZ BB BAD ò8 0 0 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de 1. 2
BMH Lock for Sliding Doors with hook bolt No. 171 Faceplate Case Striking plate Hook bolt 1. 55 mm silver finish zinc-coated S 8, silver finish malleable cast iron, zinc-coated BB : warded lock with 1 key Nr. A PZ : lock for profile cylinder on request 10 76 19±1 22.5 92 27.5 95 2 6.5 4 150 9 5 PZ 0 20 95 92 27.5 BB 0 1. Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Lock for Sliding Doors with hook bolt No. 172 Faceplate Case Striking plate Hook bolt Follower 55 mm 20, mm silver finish zinc-coated S 8, silver finish malleable cast iron, zinc-coated, lockable 8 mm, malleable cast iron 1. Available s BB : warded lock with 1 key Nr. A PZ : lock for profile cylinder Bad : lock for bathroom doors and 8 mm follower 55-80 mm e.g. stainless steel faceplate 180 154 22 59.5 ò8 110.5(5,5) 5 0.5 15 19 19 65.5 55 1.5 118 2 47 9 26 20 () 8 10 19±1 PZ ò8 ò8 19 19 55 65.5 ò8 19 19 55 65.5 BAD/WC BB 26 26 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de 1. 25
BMH Lock for Sliding Doors for wooden and metal doors for fire protection barriers No. 1004 Faceplate Case Latch bolt Follower 1. 65 mm mm, stainless steel enclosed, zinc-coated steel, nickel-plated 9 mm Available s PZW : lock for profile cylinder with latch KW : lock for Kaba or Keso cylinder (distance 74 mm), with latch 55, 60, 65, 70, 80, 90, 100 mm EN MPA NRW e.g. stainless steel faceplate with guide pin 10 x 5 holes for handles on rosettes, no mount for short plate handles Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0116 2007 EN:2004 M5 10 F4 C A2 0 Holes for handles on rosettes are optional Countersink DIN74-A5 5 ò9 46 0 68 29 5 1 27±1 98 Ø10 Ø4.6 5+1 0 8 21.5 8 72 165 25 10 5 Guide pin is optional 80 20() 15.5 5.5(5,5) 1. 26 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH lock for sliding doors with hook bolt No. 1006 Faceplate Case Hook bolt 65 mm stainless steel zinc-coated steel, nickel-plated 1. PZ : lock for profile cylinder Available s 65, 70, 80, 90, 100 mm e.g. holes for handles on rosettes 42 96 57.5 0 15 25 5 27 5 15 19 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de 1. 27
BMH Lock for Sliding Doors with Hook bolt No. 40 Faceplate Case Hook bolt Follower Striking plate 1. 65 mm stainless steel zinc-coated malleable cast iron, nickel-plated 9 mm none PZW : lock for profile cylinder with latch KW : lock for Kaba or Keso cylinder (centres 74 mm) and with latch Available s 55, 60, 65, 70, 80, 90, 100 mm e.g. guide pin holes for handles on rosettes Holes for handles on rosettes are optional 18 10 8 Ø4.6 Ø10 0 86 27±1 0 5+1 ò 9 8 21.5 46 115 72 52 165 71.5 29.5 260 10 8 2 15.5 5 Guide pin is optional 10 18 1. 28 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
Striking plates for interior doors Angled Striking Plate for Interior Doors No. S 01 No. S 0 Striking Plate for Interior Doors No. S 01 Striking Plate for Interior Doors No. S 0 Standard Model round, silver finish To be used with 1, 2, Countersink for screw DIN 97 Ø4.9 Standard Model round, silver finish with nylon support Customised models stainless steel Countersink for screw DIN 97 Ø4 10 1. 170 20.5 50 29 50 11.8 t=.9 11.8 20 8 4.1 4.1 10 75 75 To be used with 1, 2, 170 20.5 49 1 49 20 75 75 10 1.5 R10 8 Can be used with DIN left-hand and DIN right-hand Can be used with DIN left-hand and DIN right-hand Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de 1. 29
Flat reversible striking plates for interior doors Angled striking plates for interior doors No. S 06 No. S 07 No. S 08 No. S 09 Flat Striking Plate for Interior Doors No. S 06 Flat Striking Plate for Interior Doors No. S 07 1. Standard Model square-edged, silver finish Customised models stainless steel dead bolt strike S 06/R latch bolt strike S 06/F 9 22 Standard Model round, silver finish Customised models stainless steel dead bolt strike S 07/R latch bolt strike S 07/F 9 22 To be used with 1, 2, 59 50 To be used with 1, 2, 59 50 R6 R6 29 170 t=1.5 50 20 20 20 R10 20 50 50 170 29 29 20.5 50 170 50 29 170 t=1.5 50 Shows DIN left-hand DIN right-hand is reverse Shows DIN left-hand DIN right-hand is reverse Angled Striking Plate for Interior Doors No. S 08 Angled Striking Plate for Interior Doors No. S 09 Standard Model square-edged, silver finish Standard Model round, silver finish Customised models stainless steel dead bolt strike S 08/R latch bolt strike S 08/F Customised models stainless steel dead bolt strike S 09/R latch bolt strike S 09/F 20.5 To be used with 1, 2, To be used with 1, 2, 1.5 1.5 1. 0 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
Angled Striking Plate No. S 0 No. S 1 Angled Striking Plate No. S 0 Standard Model square-edged, silver finish To be used with 1 Countersink for screw DIN 97 Ø.5 Angled Striking Plate No. S 1 Standard Model round, silver finish To be used with 1 Countersink for screw DIN 97 Ø.5 1. 90 50 20.8.5 7 76 64 90 10 20.5 20 1.5 50 20 4 7 76 64 8 20 R10 R10.5 20 1.5 can be used for DIN left-hand and DIN right-hand can be used for DIN left-hand and DIN right-hand Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de 1. 2
Flat striking plates No. S 4 No. S 5 No. S 6 No. S 7 1. Flat Striking Plate No. S 4 Standard Model square-edged, silver finish Customised models stainless steel Flat Striking Plate No. S 5 Standard Model round, silver finish Customised models stainless steel To be used with 1 Countersink DIN 74-Am5 To be used with 1 Countersink DIN 74-Am5 10 10 76 t= 0 102 42 t= 20 Countersink DIN 74-Am5 Countersink DIN 74-Am5 10.8 10.8 67 t= 44 9 67 21 t= 44 9 21 0 102 42 76 20 Flat Striking Plate No. S 6 Standard Model square-edged, silver finish Angled Striking Plate no. S 7 Standard Model round, silver finish Customised models stainless steel Customised models stainless steel To be used with 162, 168 To be used with 162, 168 20 20 1. Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
Flat striking plates No. S 8 No. S 40 No. S 42 Flat Striking Plate No. S 8 Standard Model square-edged, silver finish Customised models stainless steel Countersink DIN 74-Am5 To be used with 170, 171, 172 Flat Striking Plate No. S 40 Standard Model square-edged, silver finish Customised models stainless steel To be used with 1004, 40 1. 5 218 106.5 44.5 t= 192 Countersink for screw DIN 97 Ø.5 44.7 17.5 70 50 20 52.7 27.8 202 10 48.8 11 49 27 t= 99 20 Angled Striking Plate No. S 42 Standard Model square-edged, silver finish Customised models stainless steel To be used with 11 2 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de 1. 4
Keys No. A No. A 4 1. Key No. A To be used with 2 BB BB 00 Kompakt BB Meisterstück BB 168 BB 171 BB 172 BB BB-insert Ø7 BMH 9.5 5 22 70 1 2 4 5 6 7 8 Key No. A 4 To be used with 162 BB 168 BB Ø7 9.5 27 65.5 26 4 5 6 1. 42 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
M ORTISE L OCKS FOR B UILDINGS AND A CCESSORIES 2.
BMH Mortise Lock DIN 18251 class No. 00 Faceplate Case Latch bolt Dead bolt Follower Striking plate 55 mm 20, mm, Enclosed, zinc- zinc die-cast, zinc die-cast, 8 mm spring hub, none stainless steel coated, with dead nickel-plated nickel-plated sintered metal bolt security mechanism Available s PZW : lock for profile cylinder with latch and double throw dead bolt BB : warded lock with 1 key no. A and double throw dead bolt Bad : lock for bathroom doors, centres 78 mm and single throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt 55-100 mm 2. e.g. 9 mm spring hub anti-vibration latch latch bolt and dead bolt, Teflon-coated 5 5 25 ò 8 8 21.5 46 8 72 98 4(1) 15.5 10 2 50 5 22 11 165.2 6.2.8 6.8 20 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de 2.1
BMH Mortise Lock DIN 18251 class 4 MEISTERSTÜCK Faceplate Case Latch bolt Dead bolt Follower Striking plate 55 mm 20, mm, enclosed, zinc- steel, steel, 8 mm steel none stainless steel, coated, with dead nickel-plated nickel-plated spring hub, with oil channel bolt security sintered metal mechanism Available s 2. PZW : lock for profile cylinder with latch and double throw dead bolt BB : warded lock with 1 key no. A and double throw dead bolt BAD : lock for bathroom doors, centres 78 mm and single throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt 55-100 mm e.g. 9 mm spring hub anti-vibration latch latch bolt and dead bolt, Teflon coated silencer 98 5 25 4(1) 5 2 10 50 22 11 165 6.2 5 6.8 8 (20) 21.5 46.2 8 72.8 15.5 (17,5) Dimension with ball bearing track 2.2 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
Mortise Lock BMH DIN 18251 class 5 No. 500 Faceplate Case Latch bolt Dead bolt Follower Striking plate 55 mm 20, mm, closed, zinc steel, steel, 8 mm steel none stainless steel, coated, with dead nickel-plated nickel-plated spring hub with hole for oil bolt security mechanism Available s PZW : lock for profile cylinder with latch and double throw dead bolt BB : warded lock with 1 key no. A and double throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt 55-100 mm 2. e.g. 9 mm spring hub anti-vibration latch latch bolt and dead bolt, Teflon-coated silencer 8 5 25 165 (20) 4(1) 15.5 (17,5) Dimension with ball bearing track 98 10 5 2 ò8 46 50 22 11 21.5.2 6.2 5 8 72.8 6.8 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de 2.
Senior Citizens Mortise Lock for wooden and steel doors and BMH Lock case according DIN 18250 fire protection barriers No. 1099 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel closed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm steel spring hub Available s 2. PZW : lock for profile cylinder with latch and double throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt BAD : lock for bathroom doors, centres 66 mm, single throw dead bolt 55, 60, 65, 70, 80, 100 mm EN MPA NRW e.g. square faceplate Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0116 2007 EN:2004 M 5 1 0 F H C 2 0 22 11 4(1) 15.5 25 2 27 5 61.5 ò9 8 50.5 8 96.5 72 5 165.8 6.8.2 6.2 21.5 (20) Shows DIN left-hand DIN right-hand is reverse 2.4 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Mortise Lock with two holes for profile cylinders for radiation protection doors No. 1017 Faceplate Case Latch bolt Dead bolt Followers Striking plate 40/80 mm 20, mm, zinc-coated steel, steel, 8 + 8 mm none stainless steel nickel-plated nickel-plated operative Available s PZ : lock for profile cylinder BAD : lock for bathroom doors, centres 78 mm and single throw dead bolt 40/80 mm, 50/90 mm with 1 or 2 latches, single throw dead bolt without latch, double throw dead bolt 65/100 mm, 65/110 mm and 65/0 mm with 1 or 2 latches and double throw dead bolt 2. e.g. 9 mm follower anti-vibration latch latch 5 8 21.5 46 8 72 98 110 4 (1) 5 25 5 50 2 22 11 ò8 8 ò8 165 6.2 (.2) 6.8 (.8) 65 (20) 15.5 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de 2.6
L OCKS FOR F IRE P ROTECTION D OORS.
Door Swing: DIN identification of right and left side for locks Door swing for locks as per DIN 107 The door swing is defined from the hinge side. Hinges on left Y lock DIN left-hand Hinges on righty lock DIN right-hand Hinge side = side where danger is (inwards from right) Inside = side where danger is Hinge side = side where danger is (inwards from left) Inside = side where danger is. DIN left-hand DIN right-hand Hinge side = side opposite to danger (outwards from left) Inside = side where danger is Hinge side = side opposite to danger (outwards from right) Inside = side where danger is DIN left-hand DIN right-hand Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.5
EUROPEAN EMERGENCY EXIT DEVICES FORMER RULES FOR EMERGENCY EXIT DEVICES In the past, rules on emergency exit locking devices were not set out in a single set of regulations. For instance, while German regulations allowed locks to be equipped with an anti-panic mechanism, the standard for door handles specified how handles could be used with special anti-panic locks. The standard on fire behaviour in building materials and buildings components allowed a panic bar to be used. Panic bars were only mentioned briefly in such regulations with no established regulations governing their usage. The German regulation on places of assembly states it must be possible to fully open an emergency exit door easily from the inside. Until now, fire protection had been the highest priority while little attention was paid to the emergency exit function in doors. Fire doors have now been retrofitted with panic door devices.. SPECIAL FIELDS OF USAGE With the introduction of new European regulations, national regulations were adjusted to new specifications during an adaption phase. Today, only devices in accordance with EN 179 can be used on emergency doors and only devices in accordance with EN 15 can be used on panic doors. Architects and / or local authorities decide which actual locking system should be used on which door. EN standards 179 and 15 give the following advice: where Emergency exit device according to EN 179 Places where people are familiar with the building Panic situation is unlikely Panic device according to EN 15 Public buildings, buildings which are open to the general public and stores Panic situation is likely EXIT EMERGENCY SITUATION: It must be possible to leave the building at all times Push the handle downwards (or the push plate in the direction of the escape route ) Some knowledge of emergency exit devices might be necessary Not evaluated with regard to pressure applied to the actual door PANIC SITUATION: It must be possible to leave the building at all times Push the panic bar in the direction of the escape route No knowledge of panic devices is necessary Must be possible to open if pressure is applied to the actual door REQUIREMENTS FOR EMERGENCY EXIT AND PANIC DEVICES It must be possible to fully open doors on escape routes easily from the inside Emergency doors must open in the direction of the emergency route (EN 179 and EN 15) with a single movement of the hand within 1 second and without key Emergency doors must open onto the exit route Exit routes must not be blocked Door handles or panic bars must be designed in such a way that clothing will not get caught when users exit through doors The end of the handle must be shaped in such a way that it points towards the door to avoid possible injury (EN 179)..6 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
EMERGENCY EXIT DEVICES EN 179 Emergency exit devices consist of a lock and a door handle (or alternatively, a push plate). EN 179 states emergency exit doors must weigh less than 200 kg and not exceed a height of 2500 mm and a width of 00 mm. An emergency exit device must guarantee that a door can always be opened within 1 second by pushing the handle once. The required release force must be not greater than 70 N. It is assumed that users will not try to force the actual door when escaping. The door handle must point towards the door to avoid injury. The emergency exit device must have specified durability and specified resistance to misuse. The standard also sets out requirements for classification keys, CE labelling and instructions for installation. Release force Shape of door handle. EN standard 179 regulates usage of emergency exit devices on doors in buildings which are not open to the general public. It is assumed that users are familiar with the building and a situation of panic is unlikely to arise. The standard can also be applied to doors in public buildings which are not frequently used. PANIC EXIT DEVICES EN 15 Panic exit devices consist of a lock, a panic bar (or alternatively, a push bar) and strike accessories such as striking plates and floor sleeves. EN 15 states panic exit doors must weigh less than 200 kg and not exceed a height of 2500 mm and a width of 00 mm. Panic exit devices must enable users to open the door within 1 second by pushing any part of the bar. The required release force must be no greater than 80 N with no pressure against the actual door and no greater than 220 N when there is pressure against the door. The required opening force on a door under pressure is tested as it is assumed people will press against the door leaf in panic when trying to escape. It must therefore be guaranteed that the door can be opened in such circumstances. To avoid injury, panic exit devices should not have any protruding edges and should prevent fingers from becoming trapped. Panic exit devices (panic bar or push bar) must have specified resistance to misuse. The standard also sets out requirements for classification keys, CE labelling and instructions for installation. Release force for door without pressure on the door leaf Release force for door with pressure on the door leaf EN standard 15 regulates usage of emergency exit devices on doors in public buildings which are open to the general public. It is assumed people are not familiar with the building and a situation of panic is likely to arise. Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.7
Emergency Exit Devices CE Marking EN 179 BMH EMERGENCY EXIT DEVICES All panic locks approved and monitored by the NRW Materials Testing Agency in Dortmund are certified in accordance with EN 179 when combined with specific door handles. The panic locks for BMH emergency exit devices bear the following CE mark: CE Mark Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus Manufacturer and address No. of the institute issuing certificate + certificate no. 042-BPR-0041 2004 Year CE marking issued. Standard and date of issue Use category Class : High frequency of use EN 179 : 1997 + A1 : 2001 76141A Type of device Type A: Door handle Type B: Push plate Projection of device 1: Normal projection < 150 mm 2: Shallow projection < 100 mm Durability Class 6: 100,000 cycles Class 7: 200,000 cycles Intrusion protection Class 2: 1,000 N Class : 2,000 N Class 4:,000 N Door mass Class 5: up to 100 kg Class 6: up to 200 kg Resistance against corrosion Class : High resistance Class 4: Very high resistance Fire / smoke protection Class 0: Not approved for fire & smoke protection Class 1: Approved for fire & smoke protection Personal security Class 1: Highest class Identity numbers Each manufacturer marks their door handles with their own identity number ( DO number ) supplied by the NRW Materials Testing Agency. The locks specified in our EU Certificate of Conformity 042 BPR 0041 may only be used with certain door handles made by the manufacturers ECO Schulte, FSB, Grundmann, Hewi, Hoppe, OGRO and Vieler. BMH panic locks can be used with the door handles which bear the manufacturers identity numbers ( DO numbers ) listed below. The table can be used to check compliance with EN 179 when locks and handles are supplied separately: BMH panic locks Door handle manufacturer Identity number on door handles ECO-Schulte DO 20.1.01 FSB DO 20..01 Grundmann DO 20.26.01 DO 5. Hewi DO 20..01 Hoppe DO 20.5.01 DO 20.7.01 DO 20.20.01 OGRO DO 20.04.01 Vieler DO 20..01 This labelling system ensures it is clear which combinations comply with the EN standard when locks and handles are supplied separately..8 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
Panic Exit Devices CE Marking EN 15 BMH PANIC EXIT DEVICES Lock series 4000 and 6000 have been especially developed for BMH panic exit devices. Series 4000 locks feature an upper locking mechanism which is operated via the door handle. Series 6000 locks are based on lock case dimensions specified in DIN 18251. Lock 1778 is also certified as a panic lock. It is based on the dimensions of lock cases in the non-handed Series 1700 and is non-handed itself. These panic locks are certified according to our EU certificate of conformity 042 BPR 0040 for use with specific panic bars made by the manufacturers ECO Schulte, FSB and Hewi. BMH panic locks for panic devices are labelled with the following CE mark: CE Mark Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus Manufacturer and address No. of the institute issuing certificate + certificate no. Standard and date of issue 042-BPR-0040 EN 15 : 1997 + A1 : 2001 2004 761 A Year CE marking issued Type of device Type A: Panic Bar Type B: Push Bar. Use category Class : High frequency of use Projection of device 1: Normal projection < 150 mm 2: Shallow projection < 100 mm Durability Class 6: 100,000 cycles Class 7: 200,000 cycles Intrusion protection Class 2: Personal safety takes priority over intrusion protection Door mass Class 5: up to 100 kg Class 6: up to 200 kg Resistance against corrosion Class : High resistance Class 4: Very high resistance Fire / smoke protection Class 0: Not approved for fire & smoke protection Class 1: Approved for fire & smoke protection Personal security Class 1: Highest class Identity numbers Each manufacturer marks their door handles with their own identity number ( DO number ) supplied by the NRW Materials Testing Agency. The locks specified in our EU Certificate of Conformity 042 BPR 0040 may only be used with certain door handles made by the manufacturers ECO Schulte, FSB and Hewi. BMH panic locks can be used with the door handles which bear the manufacturers identity numbers ( DO numbers ) listed below. The table can be used to check compliance with EN 15 when locks and handles are supplied separately: BMH panic locks Panic bar manufacturer Identity number of the panic bars. ECO-Schulte DO 0.0 DO 5. FSB DO 0.09 Hewi DO 0.10 This labelling system ensures it is clear which combinations comply with the EN standard when locks and handles are supplied separately. Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.9
Escape Routes ESCAPE ROUTES Regulations for emergency exit routes and panic routes state that doors must open in the direction of the escape route. Therefore, all panic locks and their combinations in this catalogue are designed for doors which open outwards. In exceptional cases, however, doors which open inwards are also approved by local authorities. We can also supply locks for such cases. You must indicate side where danger is = hinged side in your order if the locks have a split follower. Ensure you have stated the correct direction for the door swing.. Escape route outwards Door outwards (hinge side is opposite side to danger) Escape route Escape route outwards Door opens inwards (hinge side = side where danger is) Escape route.10 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
Panic Lock Functions > CHANGEOVER FUNCTION B FUNCTION FROM THE INSIDE The lock is locked and unlocked with a key. In the event of a panic situation, the dead bolt can be retracted simultaneously with the latch bolt through the handle, even if locked, and the door can thus be opened. If the lock has been locked with the key and the door has then been opened from the inside using the anti-panic function, the door is still secured against opening from the outside (the dead bolt is still drawn back and the follower is not engaged, therefore the latch is still securing the door). FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked with a key. If the latch bolt is drawn back twice, the lock is switched to the transit function and the door can be opened. The lock is switched to the closed function by turning the key towards the lock position once or twice. The door can now only be opened using the key. If the key is turned once, the door is secured by the latch bolt; if is turned twice, the door is secured by the latch bolt and the dead bolt. It is thus recommendable to turn the key twice every time. USE For doors which need to be accessible from both sides at times and must be inaccessible from the outside at other times. The door can be always opened from the side where the danger is.. TRANSIT FUNCTION D FUNCTION FROM THE INSIDE The door has a handle on the inside. The lock is locked and unlocked with a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. If unlocked, the latch bolt can be drawn back using the handle and the door can be opened. When the door is opened from the inside in a situation of panic, it can also be also opened from the outside using the handle. USE For doors which need to be accessible from both sides at times. To ensure the door cannot be opened from the outside after it has been opened in a panic situation, the dead bolt must be locked using the key. The door can always be opened from the inside. TRANSMISSION FUNCTION E FUNCTION FROM THE INSIDE The door has a handle on the inside. The lock is locked and unlocked with a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. FUNCTION FROM THE OUTSIDE The door has outside a fixed knob. Latch bolt and dead bolt can be retracted with the key. After closing the door, the door is locked from the outside through the latch bolt. The door can only be opened with the key. To open the door the latch bolt will be retracted with the key. Additionally the door can be locked and unlocked with the key. Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.
Panic Lock Functions > USE For doors where unauthorised opening from the outside should always be prevented. The door can be always opened from the side where the danger is. DEADLOCK PANIC FUNCTION P Locks with panic function P are dead lock locks. They do not have latches. FUNCTION FROM THE INSIDE The door has a handle on the inside. Even if locked, in the event of a panic situation, the dead bolt can be drawn back using the handle and the door can then be opened. The lock can be locked and unlocked using the key.. FUNCTION FROM THE OUTSIDE The door has a fixed knob on the outside. When the door is closed, it is not secured. The lock can be locked and unlocked using the key. USE For doors which need to be accessible from both sides at times. Due to the fact that the lock has no latch, the door can always be opened if the dead bolt is drawn in. The dead bolt can be drawn back using the key or by opening the door from the inside using the panic function.. Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
Automatic locking function AUTOMATIC LOCKING FUNCTION Locks with changeover function B are fitted to doors which need to be used from both sides and occasionally need to be inaccessible from the outside at certain times. To do so, the outside handle must be changed over, so it won t engage. There is an automatic locking function to ensure the outside handle does not accidentally engage. The automatic locking function ensures the key cannot be taken out of the lock before the handle is disengaged again. The key must be turned to the lock position before it can be taken out. ELECTRIC STATUS CONTROL Status can be electrically monitored in mortise locks. Monitoring can check the status of the latch bolt, dead bolt and follower. The monitoring can be for a single part or a combination of parts.. Monitoring the dead bolt Monitoring the latch bolt Monitoring the follower brown green brown green brown green white white white Contact position Dead bolt locked Latch bolt in normal position Breaking capacity: 2.0 A/0 V DC.0 A /5 V AC Resistance: max. 50 mohm Operating temperature: between -25 C and 85 C Protection rating for switch interior: IP40 Follower in normal position Possible statuses Dead bolt Latch bolt Hub Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.16
BMH Mortise Lock DIN 18 250 Cass 4 for wooden and steel doors and fire protection barriers No. 1000 Faceplate Case Latch bolt Dead bolt Follower 65 mm mm, zinc-coated 20 mm, zinc-coated enclosed, zinc-coated steel, zinc-coated steel, zinc-coated 9 mm Available s PZW : lock for profile cylinder with latch and double throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt SICHW : with integrated DB securing mechanism with latch, double throw dead bolt (centres 76 mm), without keys 55, 60, 65, 80, 100 mm EN MPA NRW e.g. stainless steel faceplate latch bolt and dead bolt nickel plated Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 2007 042-BPR-0116 EN:2004 M 5 1 0 F H C 2 0. 5 98 5 ò9 4(1) 2 46 25 5 50 22 11 8 21.5 15.5 72 165 6.8(.8) 8 6.2(.2) (20) Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.67
BMH mortise lock DIN 18250 Class 5 for wooden and steel doors and fire protection barriers No. 1005 Faceplate Case Latch bolt Dead bolt Follower 65 mm mm, zinc-coated 20 mm, zinc-coated enclosed, zinc-coated steel, zinc-coated steel, zinc-coated 9 mm Available s PZW : lock for profile cylinder with latch and double throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt SICHW : with integrated DB securing mechanism with latch, double throw dead bolt (centres 76 mm), without keys 55, 60, 65, 80, 100 mm EN MPA NRW. e.g. stainless steel faceplate latch bolt and dead bolt nickel plated Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0116 2007 EN:2004 M 5 1 0 F 6 H C 2 0 CounterdiskDIN74-Am5 5 5 98 ò9 4(1) 2 46 25 5 50 22 11 8 72 165 15.5 6.8(.8) 8 21.5 6.2(.2) (20) Shows DIN left-hand DIN right-hand is reverse.68 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Mortise Lock DIN 18250 Class 4 for wooden and steel doors and fire protection barriers No. 1044 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, zinc-coated enclosed, zinc-coated steel, zinc-coated steel, zinc-coated 9 mm Available s PZW : lock for profile cylinder with latch and double throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt SICHW : with integrated DB securing mechanism with latch, double throw dead bolt (centres 76 mm), without keys 55, 60, 65, 80, 100 mm EN MPA NRW e.g. stainless steel faceplate latch bolt and dead bolt nickel plated Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0116 2007 EN:2004 M 5 1 0 F H C 2 0. 6 16() 75.5 280 5 50 2 165 4(1) 15.5 57.5 10(7) 10 22 11 ò9 8 21.5 46 8 72 0.5 6.(.) 6.8(.8) 208 254 (20) Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.69
BMH Mortise Lock designed for top and bottom locking system for wooden and steel doors and fire protection doors No. 1000 STA Faceplate Case Latch bolt Dead bolt Follower 65 mm mm, zinc-coated 20 mm, zinc-coated zinc-coated steel, nickel-plated steel, nickel-plated 9 mm Available s PZW : lock for profile cylinder with latch and double throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt 65, 80, 100 mm EN MPA NRW e.g. shot bolt guide 25.5 mm. 042-BPR-0116 EN:2004 Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 2007 M5 10 FHC20 A 5 16 5 25 5 50 2 22 11 ò9 8 21.5 46 8 72 98 165 6.2(.2) 6.8(.8) 16 M6 (20) 4(1) 15.5 A 19.5 mm 25.5 mm Shows DIN left-hand DIN right-hand is reverse.70 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Latch Lock DIN 18 250 for wooden and steel doors and fire protection barriers No. 1001 Faceplate Case Latch bolt Follower Available s 65 mm 20, x 25 mm zinc-coated enclosed, zinc-coated steel, zinc-coated 9 mm 65 mm e.g. stainless steel faceplate latch bolt, nickel-plated faceplate, zinc-coated, 20, x 170 mm EN MPA NRW Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 2007 042-BPR-0116 EN:2004 M 5 1 0 F 0 H C 2 0. Countesink DIN74-Am5 5 98 5 2 ò9 100 6.2(.2) 25 8 (20) 4(1) 15.5 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.71
BMH dead lock for wooden and steel doors No. 1002 Faceplate Case Dead bolt 65 mm 20, mm, zinc-coated zinc-coated steel, zinc-coated PZ : Lock for profile cylinder and double throw dead bolt K : Lock for Kaba or Keso cylinder and double throw dead bolt Available s 65 mm e.g. stainless steel faceplate dead bolt, nickel-plated. 25 15.5 8 4(1) 5 22 170 100 11 5 8 100 6.8(.8) (20) Shows DIN left-hand DIN right-hand is reverse.72 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Swing Door Lock for wooden and steel doors No. 100 Faceplate Case Latch bolt Dead bolt 65 mm mm, zinc-coated enclosed, zinc-coated roller bolt, nickel-plated steel, nickel-plated PZ : lock for profile cylinder and double throw dead bolt K : lock for Kaba or Keso cylinder and double throw dead bolt Available s 55, 65, 80, 100 mm e.g. stainless steel faceplate roller bolt and dead bolt nickel-plated. Bx 8 18 5 Ax 25 5 4 22 11 50.5 67.5 7.75 2 5 5 165 Ax Adjusting screw Bx- Usable Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.7
BMH Sliding Door Lock for wooden and steel doors fire protection barriers No. 1004 Faceplate Case Hook latch bolt Follower 65 mm mm, stainless steel enclosed, zinc-coated steel, nickel-plated 9 mm Available s PZW : Lock for profile cylinder with latch KW : Lock for Kaba or Keso cylinder (centres 74 mm) with latch 55, 60, 65, 70, 80, 90, 100 mm EN MPA NRW e.g. strike plate, stainless steel with guide pin 10 x 5 holes to attach escutcheons, short plate handles can no longer be fitted. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0116 2007 EN:2004 M5 10 F4 C A2 0 Holes for handles on rosettes are optional Countersink DIN74-A5 68 ò9 0 5 46 29 5 1 27±1 98 Ø10 Ø4.6 5+1 0 8 21.5 8 72 165 25 10 5 Guide pin is optional 80 20() 15.5 5.5(5,5).74 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Mortise Latch DIN 18 250 for wooden and steel doors, fire protection barriers and transformer rooms No. 10 Faceplate Case Latch bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated 9 mm Available s PZW : lock for profile cylinder with latch KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch 55, 60, 65, 80, 100 mm EN MPA NRW on request ó DESCRIPTION The door can always be opened from the inside using the door handle Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0116 2007 EN:2004 M 5 1 0 F 0 H C 2 0. 25 5 98 5 ò9 8 165 2 6.2(.2) 65 16 21.5 46 8 72 (20) 4(1) Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.75
BMH Mortise Lock with Two Holes For Profile Cylinders DIN 18 250 for wooden and steel doors for fire protection barriers No. 1015 Faceplate Case Latch bolt Dead bolt Follower 60/100 mm 20, mm, steel, zinc-coated enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm Available s PZW : lock for profile cylinder with latch and double throw dead bolt KW : lock for Kaba- or Keso-cylinder (centres 74 mm) with latch and double throw dead bolt 2/65 mm, single throw dead bolt 62/100 mm 65/100 mm 67/100 mm EN MPA NRW. e.g. stainless steel faceplate latch bolt and dead bolt nickel-plated as profile cylinder lock designed for top and bottom locking system Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 2007 042-BPR-0116 EN:2004 M 5 1 0 F H C 2 0 5 8 15.5 5 21.5 46 72 98 165 8 100 4(1) 25 5 50 2 22 11 ò9.2 6.2.8 6.8 60 (20) Shows DIN left-hand DIN right-hand is reverse.76 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Master Lock for Latch Locking System DIN 18 250 for steel doors and fire protection barriers No. 1020 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, zinc-coated enclosed, zinc-coated steel, zinc-coated steel, zinc-coated 9 mm PZ : lock for profile cylinder and double throw dead bolt K : lock for Kaba or Keso cylinder (centres 74 mm) and double throw dead bolt SICH : with integrated DB securing mechanism, double throw dead bolt (centres 76 mm), without keys Available s 65, 80, 100 mm MPA NRW e.g. stainless steel faceplate latch bolt and dead bolt nickel plated TO BE USED WITH connecting bar No. 1106 and two slave latches No.100.. 5 5 ò9 98 25 50 22 11 8 R40 8 5 165 2 65 (20) 17 46 21.5 6.2(.2) 8 72 6.8(.8) 4(1) Ø8 7 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.77
BMH Slave Latch for Latch Locking System DIN 18 250 for wooden and steel doors, for fire protection barriers No. 100 Faceplate Case Latch bolt Available s 65 mm 20, mm, zinc-coated enclosed, zinc-coated steel, zinc-coated 65, 80, 100 mm MPA NRW e.g. stainless steel faceplate latch nickel-plated TO BE USED WITH connecting bar No. 1106 and master locks No. 1020, 1022 or 12.. 170 4(1) 4 5 2 R40 98 100 5 6.2(.2) 8 65 (20) Ø8 7 Shows DIN left-hand DIN right-hand is reverse.78 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Master Lock for Point Locking System for steel doors and fire protection barriers No. 101 Faceplate Case Latch bolt Dead bolt Follower 65 mm mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm PZW : lock for profile cylinder with latch and double throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt SICHW : with integrated DB securing mechanism, with latch, double throw dead bolt (centres 76 mm), without keys Available s 65 mm MPA NRW e.g. prepared for two profile cylinders TO BE USED WITH connecting bar No. 1108 and two dead locks No. 10. 5 25 65 4 15.5 98 5 46 ò9 2 6.2 22 165 21.5 11 50 6.8 8 72 8 5 5 Ø7 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.79
BMH Main Lock for Point Locking System for steel doors and fire protection barriers No. 10 Faceplate Case Dead bolt 65 mm mm, stainless steel enclosed, zinc-coated steel, nickel-plated MPA NRW e.g. small case TO BE USED WITH connecting bar No. 1108 and two main locks No. 101, 104 or 105. 65 25 65 5 98 5 8 46 22 165 21.5 11 72 8 5 6.8 5 Ø7 4 Shows DIN left-hand DIN right-hand is reverse.81 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Senior Citizens Mortise Lock Case dimensions in accordance with DIN 18250 for wooden and steel doors and fire protection barriers No. 1099 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm Available s PZW : lock for profile cylinder with latch and double throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt BAD : lock for bathroom doors, centres 66 mm 55, 60, 65, 70, 80, 100 mm EN MPA NRW e.g. square faceplate DESCRIPTION The hole for the profile cylinder is above the door handle for greater ease of use in old people s homes. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0116 2007 EN:2004 M 5 1 0 F H C 2 0. 25 2 27 5 61.5 22 11 ò9 50.5 8 96.5 8 72 5 165.8 6.8.2 6.2 21.5 (20) 4(1) 15.5 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.82
BMH Panic Lock Panic function: Transmission function E for use with knob cylinders Case dimensions in accordance with DIN 18250 for wooden and steel doors and fire protection barriers No. 800 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, enclosed, zinc-coated steel, steel, steel, steel, 9 mm stainless steel nickel-plated nickel-plated Available s PZW : lock for knob cylinder with latch and double throw dead bolt 55, 60, 65, 80, 100 mm EN 179 MPA NRW e.g. single throw bolt. ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The latch bolt and the dead bolt are drawn back using the handle and the door is then opened. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion E 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE OUTSIDE The door has a fixed knob on the outside. The latch bolt and dead bolt can be drawn back using the key. When the door is closed, it is locked on the outside by the latch bolt. The door can only be opened with the key. The door is opened by drawing back the latch bolt using the key. The key can also be used to lock and unlock the door. 8 5 25 165 (20) 4(1) 15.5 5 5 50 2 22 11 ò9 8 21.5 46 72 98 6.2(.2) 6.8(.8) Shows DIN left-hand DIN right-hand is reverse.8 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Panic Lock Panic function: Transit Function D for use with knob cylinders Case dimensions in accordance with DIN 18250 for wooden and steel doors and fire protection barriers No. 810 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated divided, 9 mm Available s PZ : lock for knob cylinder with double throw dead bolt 55, 60, 65, 80, 100 mm EN 179 MPA NRW on request ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The latch bolt and the dead bolt are drawn back using the handle and the door is then opened. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion D 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked with a key. If unlocked, the latch bolt can be drawn back using the handle and the door can then be opened. After the door has been opened in a panic situation, it can be also opened from the outside using the handle.. 5 5 98 ò9 25 4(1) 2 50 22 11 21.5 165 5 (20) 15. 8 72 6.8(.8) 8 46 6.2(.2) Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.84
BMH Panic Lock with Automatic Blocking Latch Bolt Panic function: Transmission Function E for use with knob cylinders for wooden and steel doors and fire protection barriers No. 801 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, enclosed, zinccoated steel, nickel-plated steel, nickel-plated 9 mm stainless steel PZW : lock for knob cylinder with latch and double throw dead bolt Available s 55, 60, 65, 80, 100 mm EN 179 on request. ó FUNCTION FROM THE INSIDE The door has a handle on the inside. When the handle is used, the automatic latch bolt, aided by the main latch bolt, and the dead bolt are drawn back and the door can then be opened. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion E 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE OUTSIDE The door has a fixed knob on the outside. The automatic latch bolt and dead bolt can be drawn back using the knob cylinder. When the door is closed, the door is locked from the outside by the automatic latch bolt. The door can only be opened using the knob cylinder. The door is opened by drawing back the automatic latch bolt using the latch with the help of the knob cylinder. The door can also be locked and unlocked using the knob cylinder. 5 5 98 ò9 4(1) 2 46 25 5 50 22 11 8 72 165 15.5 6.8(.8) 8 21.5 6.2(.2) (20) Shows DIN left-hand DIN right-hand is reverse.85 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Panic Lock Panic function: Transmission Function E DIN 18250 class 4 for wooden and steel doors and fire protection barriers No. 10 PZW Faceplate Case Latch bolt Dead bolt Follower 65 mm 20 mm, stainless steel, mm, zinc-coated enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm Available s PZW : lock for profile cylinder with latch and double throw dead bolt 55, 60, 65, 80, 100 mm KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt SICHW : with integrated DB security mechanism with latch, without keys, double throw dead bolt (centres 76 mm) EN 179 MPA NRW e.g. Stainless steel faceplate; latch bolt and dead bolt nickel plated Electric status check DIN 18250 class 5 Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion E 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a fixed knob on the outside. The latch bolt and dead bolt can be drawn back using the key. When the door is closed, it is locked on the outside by the latch bolt. The door can only be opened using the key. The door is opened by drawing back the latch bolt using the key. The key can also be used to lock and unlock the door.. 5 25 8 165 (20) 4(1) 15.5 5 5 50 2 22 11 ò9 8 21.5 46 72 98 6.2(.2) 6.8(.8) Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.86
BMH Panic Lock Panic function: Transit Function D DIN 18250 class 4 for wooden and steel doors and fire protection barriers No. 10 PZ Faceplate Case Latch bolt Dead bolt Follower 65 mm 20 mm, stainless steel, mm zinc-coated enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm Available s PZ : lock for profile cylinder with double throw dead bolt 55, 60, 65, 80, 100 mm K : lock for Kaba or Keso cylinder (centres 74 mm) with double throw dead bolt SICH: with integrated DB securing mechanism, double throw dead bolt (centres 76 mm), without keys EN 179 MPA NRW. e.g. Side of danger = hinge side Stainless steel faceplate; latch bolt and dead bolt nickel-plated Electric status check DIN 18250 class 5 Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion D 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. If unlocked, the latch bolt can be drawn back using the handle and the door can then be opened. When the door has been opened from the inside in a panic situation, it can also be opened from the outside using the handle. 5 5 8 21.5 46 8 72 98 4(1) 15.5 25 5 50 2 22 11 ò9 165 6.2(.2) 6.8(.8) (20) Shows DIN left-hand DIN right-hand is reverse.87 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Panic Lock Prepared for locking to the top and the bottom Panic function: Transmission function E for wooden and steel doors and fire protection barriers No. 10 STA-PZW Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm Available s PZW : lock for profile cylinder with latch and double throw dead bolt 65, 80, 100 mm KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt EN 179 MPA NRW on request e.g. with a distance between faceplate and bar of 25.5 mm as lock for active door leaf for double leaf doors (11 STA-PZW) as panic lock prepared for two profile cylinders (1019 STA-PZW) Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion E 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The lock is locked and unlocked with a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a fixed knob on the outside. Latch bolt, dead bolt and shot bolts can be drawn back using the key. After the door is closed, it is locked on the outside by the latch bolt. The door can only be opened using the key. The door is opened by drawing back the latch bolt using the key. The key can also be used to lock and unlock the door.. A 5 16 46 25 21.5 165 72 8 98 16 5 2 ò9 50 22 11 6.2(.2) 5 8 6.8(.8) M6 (20) 4(1) 15.5 A 19.5 mm 25.5 mm Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.88
BMH Panic Lock Designed for Top and Bottom Locking System Panic function: Transit Function D for wooden and steel doors and fire protection barriers No. 10 STA-PZ Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm, split-follower Available s PZ : lock for profile cylinder with double throw dead bolt K : lock for Kaba or Keso cylinder (centres 74 mm) with double throw dead bolt 65, 80, 100 mm EN 179 MPA NRW on request with a gap of 25.5 mm between faceplate and bar as lock for active door leaf for double leaf doors (11 STA-PZ) as panic lock prepared for two profile cylinders (1019 STA-PZ) Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion D 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The lock is locked and unlocked with a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked with a key. If unlocked, the latch bolt can be drawn back using the handle and the door can then be opened. After the door has been opened from the inside in a panic situation, it can also be opened from the outside using the handle.. A 5 25 16 98 16 5 5 50 2 22 11 ò9 8 21.5 46 72 165 6.2(.2) 6.8(.8) 8 M6 A 19.5 mm 25.5 mm (20) 4(1) 15.5 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.89
BMH Panic Lock Designed for Two Profile Cylinders Panic function: Transmission Function E DIN 18280 for wooden and steel doors and fire protection barriers No. 1019 PZW Faceplate Case Latch bolt Dead bolt Follower 60/100 mm 20, mm, zinc-coated enclosed, zinc-coated steel, zinc-coated steel, zinc-coated 9 mm Available s PZW : lock for profile cylinder with latch and double throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt SICHW : with integrated DB securing mechanism, with latch, double throw dead bolt (centres 76 mm), without keys 2/65 mm, single throw dead bolt 65/100 mm 62/100 mm 67/100 mm e.g. Stainless steel faceplate; latch bolt and dead bolt nickel-plated EN 179 MPA NRW. ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The lock is locked and unlocked with a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion E 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE OUTSIDE The door has a fixed knob on the outside. The latch bolt and dead bolt can be drawn back using the key. When the door has been closed, it is locked on the outside by the latch bolt. The door can only be opened using the key. The door is opened by drawing back the latch bolt using the key. The key can also be used to lock and unlock the door 5 5 2 15.5 98 21.5 46 100 4(1) 25 5 50 2 22 11 8 ò9 2 8 8 72 165 6.2(.2) 8 6.8(.8) 60 (20) Shows DIN left-hand DIN right-hand is reverse.90 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Panic Lock Designed for two Profile Cylinders Panic function: Transit Function D DIN 18280 for wooden and steel doors and fire protection barriers No. 1019 PZ Faceplate Case Latch bolt Dead bolt Follower 60/100 mm 20, mm, zinc-coated enclosed, zinc-coated steel, zinc-coated steel, zinc-coated 9 mm, split follower Available s PZ : lock for profile cylinder with double throw dead bolt 2/65 mm, single throw dead bolt K : lock for Kaba or Keso cylinder (centres 74 mm) with double throw dead bolt 65/100 SICH : with integrated DB securing mechanism and double throw 62/100 dead bolt (centres 76 mm), without keys 67/100 mm EN 179 MPA NRW e.g. Stainless steel faceplate; latch bolt and dead bolt nickel-plated Side of danger = hinge side Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion D 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The lock is locked and unlocked with a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. If unlocked, the latch bolt can be drawn back using the handle and the door can then be opened. When the door has been opened from the inside in a panic situation, it can also be opened from the outside using the handle.. 5 5 5 50 2 22 11 8 ò9 8 21.5 46 72 98 165 6.2 (.2) 2 8 6.8 (.8) 100 2 (20) 4(1) 15.5 25 60 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.91
BMH Main Lock for Latch Locking System Panic function: Changeover Function B DIN 18250 for wooden and steel doors and fire protection barriers No. 1022 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm, split follower Available s PZ : lock for profile cylinder with single throw dead bolt 65, 80, 100 mm K : lock for Kaba or Keso cylinder (centres 74 mm) with single throw dead bolt and on request EN 179 MPA NRW. e.g. Prepared for two profile cylinders (1029) TO BE USED WITH Shot bar 1106 and two Latch Locks No. 100, 102. Also with higher positioned panic function (e.g. for pre-school care facilities, with higher positioned Changeover Function B) with lock 10 and shot bolt 1105. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion B 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The main lock is connected to the slave latches by two shoot bolts. The slave latches are self-closing and have a latch and an additional security latch bolt. If normal locks are not secured with a dead bolt, they can be easily opened by pushing back the latch bolt using basic tools. Such techniques cannot be used on this lock as the security latch bolt triggers an automatic blocking mechanism, which prevents the main latch from being pushed in. The lock is locked and unlocked with a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. If the lock has been locked with the key after the door has been opened from the inside, the door is secured against opening from the outside. ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. If the latch bolt is drawn back twice, the lock is switched to the transit function and the door can be opened. The lock is switched to the closed function by turning the key towards the lock position once or twice. The door can now only be opened using the key. If the key is turned once, the door is secured by the latch bolt; if is turned twice, the door is secured by the latch bolt and the dead bolt. It is thus recommendable to turn the key twice every time. 5 ò9 46 R40 6.2 (,2) 8 21.5 8 72 165 6.8 (,8) 15.5 (20) 2 5 25 98 5 50 11 8 65 4 Ø8 7 Shows DIN left-hand DIN right-hand is reverse.92 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Panic Lock Panic function: Transmission Function E in a higher position for wooden and steel doors and fire protection barriers No. 102 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm, Available s PZW : lock for profile cylinder with latch and single throw dead bolt 65, 80, 100 mm EN 179 MPA NRW on request Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion E 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside which is fitted at a higher position (e.g. 1500 mm above floor) on the Additional Lock 10. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a fixed knob on the outside. The latch bolt and dead bolt can be drawn back using the key. When the door has been closed, it is locked on the outside by the latch bolt. The door can only be opened using the key. The door is opened by drawing back the latch bolt using the key. The key can also be used to lock and unlock the door.. 2 5 5 ò9 98 6.2(.2) 25 50 11 8 165 5 6.8(.8) 8 17 46 R40 21.5 8 72 (20) 4(1) Ø8 7 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.9
BMH Slave Lock for handles mounted in a higher position for wooden and steel doors and fire protection barriers No. 10 Faceplate Case Follower Available s 65 mm 20, mm, stainless steel enclosed, zinc-coated 9 mm 65, 80, 100 mm MPA NRW ó FUNCTION For door handles which are mounted at a higher position (e.g. 1500 mm above floor) with a main lock fitted on a single leaf door or on the active door leaf in a double leaf door. The slave lock follower moves the actuating spindle and this then moves the shot bolt, which, in turn, moves the latch bolt and the dead bolt in the master lock.. 170 4 98 5 R40 100 4(1) 8 ò9 (20) 15.5 Ø8 7 Shows DIN left-hand DIN right-hand is reverse.94 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Master Lock for Latch Locking System Panic function: Transit Function D DIN 18250 for wooden and steel doors and fire protection barriers No. 1027 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated divided, 9 mm Available s PZ : lock for profile cylinder with single throw dead bolt 65, 80, 100 mm K : lock for Kaba or Keso cylinder (centres 74 mm) with single throw dead bolt EN 179 MPA NRW e.g. Side where danger is = hinge side Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion D 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The master lock is connected to the slave latches by two shoot bolts. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. The dead bolt can be drawn back simultaneously with the latch bolt and the slave latches using the handle. When closed, the door is not secured against opening from the outside. The dead bolt is drawn into position by turning the key and the door is secured. The door is opened by drawing back the dead bolt using the key. The latch bolt and the slave latches are drawn back using the handle.. 25 50 2 5 11.5 8 ò9 R40 46 21.5 165 6.2 (,2) 5 98 5 8 72 6.8 (,8) 8 65 (20) 17 4 Ø8 7 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.97
BMH Panic Lock Panic function: Changeover Function B DIN 18250 for wooden and steel doors and fire protection barriers No. 1028 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated divided, 9 mm Available s PZ : lock for profile cylinder with single throw dead bolt 55, 60, 65, 80, 100 mm K : lock for Kaba or Keso cylinder (centres 74 mm) with single throw dead bolt SICH : with integrated DB securing mechanism and single throw dead bolt (centres 76 mm), without keys EN 179 MPA NRW. e.g. Side of danger = hinge side Electric status check Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion B 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. The lock is switched to the transit function by turning the key back twice. The door can now be opened. When the key is turned forward once or twice, the lock is switched to the closed function. The door can now only be opened with the key. If the key is turned forward once, the door is secured by the latch bolt; if it is turned twice, the door is secured by the latch bolt and the dead bolt. It is thus recommended to always turn the key twice. ó FUNCTION FROM THE INSIDE The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. If the lock has been locked using the key and the door has then been opened from the inside using the anti-panic function, the door is secured against opening from the outside (the dead bolt is still drawn back and the follower is not operating, therefore the latch is still securing the door). 5 8 15.5 21.5 46 8 72 98 4(1) 5 25 5 50 2 11 ò9 165 6.2(.2) 6.8(.8) (20) Shows DIN left-hand DIN right-hand is reverse.98 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Master Panic Lock for Point Locking System Panic function: Transit Function D for steel doors and fire protection barriers No. 104 Faceplate Case Latch bolt Dead bolt Follower 65 mm mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated divided, 9 mm Available s PZ : lock for profile cylinder with double throw dead bolt 65 mm K : lock for Kaba or Keso cylinder (centres 74 mm) with double throw dead bolt SICH : with integrated DB securing mechanism and single throw dead bolt (centres 76 mm), without keys EN 179 MPA NRW e.g. Electric status check Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion D 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The Master lock 104 is connected to two Slave Locks 10 by Shot Bolt 1108. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt and the dead bolts in the slave locks using the handle and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The latch can be drawn back using the handle. The door is not secured when closed. The door must be locked with the key to secure it. The key is used to turn the dead bolts in the main lock and the slave locks into the locked position. To open the door, the dead bolts must be withdrawn using the key and the latch must be drawn back using the handle.. 5 11 22 8 50 2 5 21.5 46 72 98 5 2.5 6.2 165 ò9 R17 25 8 6.8 65 15.5 5 Ø7 4 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.99
BMH Panic Master Lock for Point Locking System Panic function: transmission functione for steel doors and fire protection barriers No. 105 Faceplate Case Latch bolt Dead bolt Follower 65 mm mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm Available s PZW : lock for profile cylinder with latch and double throw dead bolt 65 mm KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt SICHW : with integrated DB securing mechanism with latch, double throw dead bolt (centres 76 mm), without keys EN 179 MPA NRW. e.g. Electric status check Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion E 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The Master Lock 10 is connected to two Slave Locks 10 by Shoot Bolt 1108. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt and the slave lock dead bolts using the handle and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a fixed knob on the outside. The latch bolt and dead bolts in the main lock and slave locks can be drawn back using the key. After the door is closed, it is locked on the outside by the latch bolt. The door can only be opened using the key. The door is opened by drawing back the latch bolt using the key. The door can also be locked and unlocked using the key. 5 5 21.5 46 22 11 2 8 5 98 2.5 6.2 165 ò9 R17 50 72 8 6.8 65 15.5 25 5 Ø7 4 Shows DIN left-hand DIN right-hand is reverse.100 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
for wooden and steel doors and fire protection barriers BMH BMH Panic Deadlock Panic function: Deadlock Panic Function P for the active door leaf in wooden and steel doors and fire protection barriers No. 1040 No. 10 Faceplate Case Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated 9 mm Available s PZ : lock for profile cylinder with double throw dead bolt (no. 10 single throw dead bolt) K : lock for Kaba or Keso cylinder (centres 74 mm) with double throw dead bolt (no. 10 single throw dead bolt) 55, 65, 80, 100 mm EN 179 e.g Striking plate Electric status check Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion P 2004 EN179:1997 +A1:2001 7 6 0 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. Even if locked, in the event of a panic situation, the dead bolt can be drawn back using the handle and the door can then be opened. The lock can be locked and unlocked using the key. ó FUNCTION FROM THE OUTSIDE The door has a fixed knob on the outside. When the door is closed, it is not secured. The lock can be locked and unlocked using the key.. Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.101
for wooden and steel doors and fire protection barriers BMH BMH Panic Deadlock Panic function: Deadlock Panic Function P for the active door leaf in wooden and steel doors and fire protection barriers No. 1040 No. 10 No. 1040 25 5 5 5 22 11 ò9 8 21.5 46 72 98 165. 8 6.8(.8) (20) 4(1) 15.5 Shows DIN left-hand DIN right-hand is reverse No. 10 5 25 21.5 165 (20) 4(1) 15.5 98 5 ò9 5 8 72 4 11 6.8(.8) 8 46 Shows DIN left-hand DIN right-hand is reverse.102 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Panic Lock Panic function: Transmission Function E DIN 18250 for the active door leaf in wooden or steel double leaf doors or fire protection barriers No. 11 PZW Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm Available s PZW : lock for profile cylinder with latch and single throw dead bolt 65, 80, 100 mm KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and single throw dead bolt SICHW : with integrated DB security mechanism with latch, single throw dead bolt (centres 76 mm), without keys EN 179 MPA NRW e.g. Striking plates Other backsets Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion E 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The door is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back with the latch bolt using the handle and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a fixed knob on the outside. The latch bolt and dead bolt can be drawn back using the key. When the door is closed, it is locked on the outside by the latch bolt. The lock can also be locked and unlocked using the key. The door is opened by drawing back the latch bolt using the key. The door can also be locked and unlocked using the key.. 25 (20) 4(1) 15.5 98 5 5 2 ò9 50 21.5 165 5 8 72 4 11 6.8(.8) 8 46 6.2(.2) Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.10
BMH Panic Lock Panic function: Transit Function D DIN 18250 for the active door leaf in wooden or steel double leaf doors or fire protection barriers No. 11 PZ Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm, split follower Available s PZ : lock for profile cylinder with double single throw dead bolt 65, 80, 100 mm K : lock for Kaba or Keso cylinder (centres 74 mm) with single throw dead bolt SICH : with integrated DB security mechanism and single throw dead bolt (centres 76 mm), without keys EN 179 MPA NRW. e.g. Striking plates Other backsets Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion D 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The door is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. If unlocked, the latch bolt can be drawn back using the handle and the door can be opened. When the door has been opened from the inside in a panic situation, the door can also be opened from the outside using the handle. The door is not secured when closed. The door must be locked with the key to ensure it cannot be opened. 5 46 25 21.5 (20) 4(1) 15.5 8 98 5 2 ò9 6.2(.2) 50 165 72 5 8 4 11 6.8(.8) Shows DIN left-hand DIN right-hand is reverse.104 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Master Lock for Latch Locking System Panic function: Changeover Function B DIN 18250 for the active door leaf in a wooden or steel double leaf door or fire protection barrier No. 12 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated divided, 9 mm Available s PZ : lock for profile cylinder with single throw dead bolt K : lock for Kaba or Keso cylinder (centres 74 mm) with single throw dead bolt 65, 80, 100 mm EN 179 e.g. Striking plate Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion B 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The Master Lock 12 is connected to the Slave Latches 100 through Shoot Bolt 1106. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt and the slave latches using the handle and the door can then be opened. If the lock has been locked using the key and the door has then been opened from the inside using the antipanic function, the door is secured against opening from the outside (the dead bolt is still drawn back and the follower is not operating, the latch is thus still securing the door).. ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. The lock is switched to the transit function by turning the key twice. The door can then be opened. The lock is switched to the closed function by turning the key forward once or twice. The door can then only be opened using the key. If the key is turned forward once, the door is secured by the latch bolt; if it is turning forward twice, it will be secured by the latch bolt and the dead bolt. It is thus recommended to always turn the key twice. 5 5 ò9 25 165 6.8(.8) 16 8 2 46 98 R40 6.2(.2) 50 11 8 21.5 5 8 72 65 (20) 4(1) Ø8 7 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.105
BMH Panic Lock Panic function: Changeover Function B DIN 18250 for the active door leaf in wooden and steel doors and fire protection barriers No. 18 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm split follower Available s PZ : lock for profile cylinder with single throw dead bolt 65, 80, 100 mm K : lock for Kaba or Keso cylinder (centres 74 mm) with single throw dead bolt SICH : with integrated DB security mechanism and single throw dead bolt (centres 76 mm), without keys EN 179 MPA NRW. e.g. Striking plate Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion B 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. If the lock has been locked using the key and the door has then been opened from the inside using the anti-panic function, the door is secured against opening from the outside (the dead bolt is still drawn back and the follower is not engaged, therefore the latch is still securing the door). ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. The lock is switched to the transit function by turning the key back twice. The door can now be opened. When the key is turned forward once or twice, the lock is switched to the closed function. The door can now only be opened with the key. If the key is turned forward once, the door is secured by the latch bolt; if it is turned twice, the door is secured by the latch bolt and the dead bolt. 25 (20) 4(1) 15.5 8 46 21.5 165 72 98 5 5 2 ò9 6.2(.2) 50 5 8 4 11 6.8(.8) Shows DIN left-hand DIN right-hand is reverse.106 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
Panic Lock for wooden and steel doors and BMH Panic function: Transmission Function E fire protection barriers No. 60 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm Available s PZW : lock for profile cylinder with latch and double throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt 55, 65, 80, 100 mm EN 15 e.g. Electric status check PLEASE NOTE This anti-panic lock is tested according to EN 15 and must only be used with the anti-panic bars and accessories which are specified in our EU Certificate of Conformity 042-BPR-0040. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0040 Panikfunktion E 2004 EN15:1997 +A1:2001 7 6 1 1 2 1 A ó FUNCTION FROM THE INSIDE The door has a panic bar on the inside. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the panic bar and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a fixed knob on the outside. The latch bolt and dead bolt can be drawn back using the key. When the door is closed, it is locked on the outside by the latch bolt. The lock can only be opened using the key. The door is opened by drawing back the latch bolt using the key. The door can also be locked and unlocked using the key.. 25 5 50 2 5 22 11 ò9 8 21.5 46 72 98 165 5 6.2(.2) 6.8(.8) (20) 4(1) 15.5 8 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.107
Panic Lock for wooden and steel doors and BMH Panic function: Transit Function D for fire protection barriers No. 60 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm split follower Available s PZ : lock for profile cylinder with double throw dead bolt K : lock for Kaba or Keso cylinder (centres 74 mm) with double throw dead bolt 55, 65, 80, 100 mm EN 15. e.g. Electric status check PLEASE NOTE This anti-panic lock is tested according to EN 15 and must only be used with the anti-panic bars and accessories which are specified in our EU Certificate of Conformity 042-BPR-0040. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0040 Panikfunktion D 2004 EN15:1997 +A1:2001 7 6 1 1 2 1 A ó FUNCTION FROM THE INSIDE The door has a panic bar on the inside. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the panic bar and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. If unlocked, the latch bolt can be drawn back using the handle and the door can be opened. When the door is opened from the inside in a panic situation, it can also be opened from the outside using the handle. 8 (20) 15.5 5 21.5 46 8 72 98 165 4(1) 5 25 5 50 2 22 11 ò9 6.2(.2) 6.8(.8) Shows DIN left-hand DIN right-hand is reverse.108 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
Panic Lock for wooden and steel doors and BMH Panic function: Changeover Function B fire protection barriers No. 6028 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm, split follower Available s PZ : lock for profile cylinder with single throw dead bolt K : lock for Kaba or Keso cylinder (centres 74 mm) with single throw dead bolt 55, 65, 80, 100 mm e.g. Electric status check PLEASE NOTE This anti-panic lock is tested according to EN 15 and must only be used with the anti-panic bars and accessories which are specified in our EU Certificate of Conformity 042-BPR-0040. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0040 Panikfunktion B 2004 EN15:1997 +A1:2001 7 6 1 1 2 1 A EN 15 ó FUNCTION FROM THE INSIDE The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the panic bar and the door can then be opened. If the lock has been locked using the key and the door has then been opened from the inside using the anti-panic function, the door is secured against opening from the outside (the dead bolt is still drawn back and the follower is not engaged, therefore the latch is still securing the door). ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. The lock is switched to the transit function by turning the key back twice. The door can now be opened. When the key is turned forward once or twice, the lock is switched to the closed function. The door can now only be opened with the key. If the key is turned forward once, the door is secured by the latch bolt; if it is turned twice, the door is secured by the latch bolt and the dead bolt. It is thus recommended to always turn the key twice.. ò9 46 6.2(.2) 8 21.5 8 72 165 6.8(.8) (20) 15.5 5 2 5 50 11 4(1) 5 98 25 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.109
Panic Lock Panic function: Transmission Function E for wooden and steel doors and BMH for use with knob cylinders fire protection barriers No. 6800 Faceplate Case Follower Latch bolt Dead bolt 65 mm 20, mm, stainless steel enclosed, zinc-coated 9 mm steel, nickel-plated steel, nickel-plated Available s PZW : lock for profile cylinder with latch and double throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt 55, 65, 80, 100 mm. e.g. Electric status check PLEASE NOTE This anti-panic lock is tested according to EN 15 and must only be used with the anti-panic bars and accessories which are specified in our EU Certificate of Conformity 042-BPR-0040. EN 15 ó FUNCTION FROM THE INSIDE The door has a panic bar on the inside. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the panic bar and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a fixed knob on the outside. The latch bolt and dead bolt can be drawn back using the key. When the door is closed, it is locked on the outside by the latch bolt. The lock can only be opened using the key. The door is opened by drawing back the latch bolt using the key. The door can also be locked and unlocked using the key. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0040 Panikfunktion E 2004 EN15:1997 +A1:2001 7 6 1 1 2 1 A Contersink DIN74-Am5 25 5 50 2 8 21.5 46 72 98 165 (20) 4(1) 15.5 5 5 22 11 ò9 8 6.2(.2) 6.8(.8) Shows DIN left-hand DIN right-hand is reverse.110 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
Panic Lock with for use with knob cylinders Automatic Blocking Latch Bolt for wooden and steel doors and BMH Panic function: Transmission Function E fire protection barriers No. 6801 Faceplate Case Follower Latch bolt Dead bolt 65 mm 20, mm, stainless steel enclosed, zinc-coated 9 mm steel, nickel-plated steel, nickel-plated Available s PZW : lock for knob cylinder with latch and double throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt 55, 65, 80, 100 mm EN 15 e.g. Electric status check PLEASE NOTE This anti-panic lock is tested according to EN 15 and must only be used with the anti-panic bars and accessories which are specified in our EU Certificate of Conformity 042-BPR-0040. ó FUNCTION FROM THE INSIDE The door has a panic bar on the inside. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the security latch bolt and the main latch bolt using the panic bar and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a fixed knob on the outside. The security latch bolt, the main latch bolt and dead bolt can be drawn back using the knob cylinder. When the door is closed, it is locked on the outside by the security latch bolt. The door can only be opened using the knob cylinder. The door is opened by drawing back the security latch bolt using the knob cylinder. The door can also be locked and unlocked using the knob cylinder.. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0040 Panikfunktion E 2004 EN15:1997 +A1:2001 7 6 1 1 2 1 A 5 5 98 ò9 4(1) 2 46 25 5 50 22 11 8 15.5 72 165 6.8(.8) 8 21.5 6.2(.2) (20) Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.111
for the active door leaf in wooden or BMH Panic Lock steel double leaf doors or BMH Panic function: Transmission Function E fire protection barriers No. 61 Faceplate Case Follower Latch bolt Dead bolt 65 mm 20, mm, stainless steel enclosed, zinc-coated 9 mm, steel, nickel-plated steel, nickel-plated Available s PZW : lock for profile cylinder with latch and single throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt 55, 65, 80, 100 mm EN 15. e.g. Electric status check PLEASE NOTE This anti-panic lock is tested according to EN 15 and must only be used with the anti-panic bars and accessories which are specified in our EU Certificate of Conformity 042-BPR-0040. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0040 Panikfunktion E 2004 EN15:1997 +A1:2001 7 6 1 1 2 1 A ó FUNCTION FROM THE INSIDE The door has a panic bar on the inside. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the panic bar and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a fixed knob on the outside. The latch bolt and dead bolt can be drawn back using the key. When the door is closed, it is locked on the outside by the latch bolt. The lock can only be opened using the key. The door is opened by drawing back the latch bolt using the key. The door can also be locked and unlocked using the key. ò9 8 21.5 46 72 98 165 5 6.2(.2) 6.8(.8) 8 25 5 50 2 5 4 11 (20) 4(1) 15.5 Shows DIN left-hand DIN right-hand is reverse.1 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
for the active door leaf of wooden or BMH Panic Lock steel double leaf doors or BMH Panic function: Transit Function D fire protection barriers No. 61 Faceplate Case Follower Latch bolt Dead bolt 65 mm 20, mm, stainless steel enclosed, zinc-coated 9 mm split follower steel, nickel-plated steel, nickel-plated Available s PZ : lock for profile cylinder with single throw dead bolt K : lock for Kaba or Keso cylinder (centres 74 mm) with single throw dead bolt 65, 80, 100 mm EN 15 e.g. Electric status check PLEASE NOTE This anti-panic lock is tested according to EN 15 and must only be used with the anti-panic bars and accessories which are specified in our EU Certificate of Conformity 042-BPR-0040. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0040 Panikfunktion D 2004 EN15:1997 +A1:2001 7 6 1 1 2 1 A ó FUNCTION FROM THE INSIDE The door has a panic bar on the inside. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the panic bar and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. If unlocked, the latch bolt can be drawn back using the handle and the door can be opened. When the door is opened from the inside in a situation of panic, it can then also be also opened from the outside using the handle.. 5 5 25 5 50 2 4 11 ò9 8 21.5 46 8 72 98 165 6.2(.2) 6.8(.8) (20) 4(1) 15.5 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.1
for the active door leaf in wooden or BMH Panic Lock steel double leaf doors or BMH Panic function: Changeover Function B fire protection barriers No. 68 Faceplate Case Follower Latch bolt Dead bolt 65 mm 20, mm, stainless steel enclosed, zinc-coated 9 mm split follower steel, nickel-plated steel, nickel-plated Available s PZ : lock for profile cylinder with single throw dead bolt K : lock for Kaba or Keso cylinder (centres 74 mm) with single throw dead bolt 65, 80, 100 mm EN 15. e.g. Electric status check PLEASE NOTE This anti-panic lock is tested according to EN 15 and must only be used with the anti-panic bars and accessories which are specified in our EU Certificate of Conformity 042-BPR-0040. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0040 Panikfunktion B 2004 EN15:1997 +A1:2001 7 6 1 1 2 1 A ó FUNCTION FROM THE INSIDE The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the panic bar and the door can then be opened. If the lock has been locked using the key and the door has then been opened from the inside using the anti-panic function, the door is secured against opening from the outside (the dead bolt is still drawn back and the follower is not engaged, therefore the latch is still securing the door). ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. The lock is switched to the transit function by turning the key back twice. The door can now be opened. When the key is turned forward once or twice, the lock is switched to the closed function. The door can now only be opened with the key. If the key is turned forward once, the door is secured by the latch bolt; if it is turned twice, the door is secured by the latch bolt and the dead bolt. It is thus recommended to always turn the key twice. 5 5 25 5 50 2 4 11 ò9 8 21.5 46 8 72 98 165 6.2(.2) 6.8(.8) (20) 4(1) 15.5 Shows DIN left-hand DIN right-hand is reverse.1 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Mortise Lock can be used for DIN left and DIN right steel doors and for fire protection barriers No. 179 Faceplate Case Latch bolt Dead bolt Follower 65 mm mm, zinc-coated enclosed, zinc-coated steel, zinc-coated steel, zinc-coated 9 mm PZW : lock for profile cylinder with latch and single throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and single throw dead bolt EN MPA NRW e.g. 20 mm faceplate stainless steel faceplate; latch bolt and dead bolt, nickel plated with holes for rosettes bathroom lock (handed, DIN left-hand or right-hand required). Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0116 2007 EN:2004 M 5 1 0 F 0 H C 2 0 Ø 11.25.5 95 ò9 62 Ø 7.25 5 25 9 27 9 72 6 7.5.5 65 19.5 16.5 17 18. 72 62 186 Non-handed Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.115
BMH Security Mortise Lock can be used for DIN left-handed and DIN right-handed steel doors and fire protection barriers No. B 82 Faceplate Case Latch bolt Dead bolt Follower 65 mm mm, zinc-coated enclosed, zinc-coated steel, zinc-coated steel, zinc-coated 9 mm PZW : lock for profile cylinder with latch and single throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and single throw dead bolt EN MPA NRW e.g. double throw dead bolt. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 2007 042-BPR-0116 EN:2004 M 5 1 0 F 1 H C 2 0 Ø 11.25 25 62 72 72 62 94.5 19 15 ò9 186.5 6 Ø 7.25 27 5 65 19.5 16.5 17 *. *Measurement 17 mm, including rivets Non-handed.116 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
can be used for DIN left-handed BMH BMH Mortise Lock and DIN right-handed doors No. 189 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20 mm, zinc-coated enclosed, zinc-coated steel, zinc-coated steel, zinc-coated 8 mm PZW : lock for profile cylinder with latch and single throw dead bolt. 6.5 ò8 25 65 0 2 101 7.5 11 72 4 10 (6.5) 72 160 5 7 20 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.118
can be used for DIN left-hand and BMH panic lock DIN right-hand steel doors and BMH Panic function: Transit Function D fire protection barriers No. 1758 Faceplate Case Latch bolt Dead bolt Follower 65 mm mm, zinc-coated enclosed, zinc-coated steel, zinc-coated steel, zinc-coated 9 mm split follower PZ : lock for profile cylinder with latch and single throw dead bolt K : lock for Kaba or Keso cylinder (centres 74 mm) with latch and single throw dead bolt EN 179 MPA NRW. e.g. panic function: side where danger is = hinge side (handed, DIN left-hand or right-hand required) 20 mm faceplate stainless steel faceplate; latch bolt and dead bolt nickel plated with holes for rosettes bathroom lock (handed, DIN left-hand or right-hand required) double throw dead bolt Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion D 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The door is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. If unlocked, the latch bolt can be drawn back using the handle and the door can be opened. When the door is opened from the inside in a situation of panic, it can then also be also opened from the outside using the handle. Ø11.25 25 95 9 27 9.5 ò9 5 6 7.5 65 19.5 16.5 17 18..5 Ø5, Ø5, 62 72 72 62 186 Ø 7.25 Non-handed.119 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Panic Lock Panic function: Transmission Function E can be used for DIN left-hand and DIN right-hand steel doors and for fire protection barriers No. 1759 Faceplate Case Latch bolt Dead bolt Follower 65 mm mm, zinc-coated enclosed, zinc-coated steel, zinc-coated steel, zinc-coated 9 mm PZW : lock for profile cylinder with latch and single throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and single throw dead bolt EN 179 MPA NRW e.g. 20 mm faceplate stainless steel faceplate; latch bolt and dead bolt nickel plated with holes for rosettes double throw dead bolt ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The door is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion E 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE OUTSIDE The door has outside a fixed knob. Latch bolt and dead bolt can be retracted with the key. When the door is closed, it is locked from the outside by the latch bolt. The door can only be opened with the key. The door is opened by drawing back the latch bolt using the key. The door can also be locked and unlocked using the key.. Ø 11.25 94.5 ò9 62 5 25 9 27 9.5 6 7.5 65 19.5 16.5 17 18. Ø 7.25.5 62 72 72 186 Non-handed Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.0
BMH Panic Lock Panic function: Special Function Z for entrance and interior doors and for steel doors and fire protection barriers No. 1778 Faceplate Case Latch bolt Follower 65 mm mm, zinc-coated enclosed, zinc-coated steel, zinc-coated 9 mm split follower PZ : lock for profile cylinder with latch and single throw dead bolt K : lock for Kaba or Keso cylinder (centres 74 mm) with latch and single throw dead bolt EN 179 EN 15 e.g. 20 mm faceplate stainless steel faceplate; latch bolt and dead bolt nickel plated with holes for rosettes double throw dead bolt ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The door is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened.. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion Z 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0040 Panikfunktion Z 2004 EN15:1997 +A1:2001 7 6 0 1 2 1 A ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. If unlocked, the latch bolt can be drawn back using the handle and the door can be opened. If locked after the door is opened in a panic situation, the follower will still not engage and the door cannot be opened from the outside. Ø 11.25 ò9 Ø5, 25 27 65 19.5 17 18..5 104 8 21.5 62 Ø 7.25 8 72 8 186 5 8 4 16.5 Shows DIN left-hand DIN right-hand is reverse.1 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
No. B 82 Panic PZW Panic function: Transmission Function E can be used for DIN left-hand and DIN right-hand steel doors and for fire protection barriers No. B 82 panic PZW Faceplate Case Latch bolt Dead bolt Follower 65 mm mm, zinc-coated enclosed, zinc-coated steel, zinc-coated steel, zinc-coated 9 mm PZW : lock for profile cylinder with latch and single throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and single throw dead bolt EN 179 MPA NRW on request Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion E 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The locked is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a fixed knob on the outside. The latch bolt and dead bolt can be drawn back using the key. When the door is closed, it is locked on the outside by the latch bolt. The door can only be opened using the key. The door is opened by drawing back the latch bolt using the key. The door can also be locked and unlocked using the key.. Ø11.25 62 ò9 25 62.5 65. 27 94.5 15 19 19.5 16.5 17 * 186 72 Ø 7.25 6 72 5 *Measurement 17 mm, including rivets Non-handed Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.2
BMH Panic Lock Panic function: Transit Function D can be used for DIN left-hand and DIN right-hand steel doors and for fire protection doors No. B 82 panic PZ Faceplate Case Latch bolt Dead bolt Follower 65 mm mm, zinc-coated enclosed, zinc-coated steel, zinc-coated steel, zinc-coated 9 mm split follower PZ : lock for profile cylinder with latch and single throw dead bolt K : lock for Kaba or Keso cylinder (centres 74 mm) with latch and single throw dead bolt EN 179 MPA NRW. on request Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion D 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. If unlocked, the latch bolt can be drawn back using the handle and the door can be opened. When the door is opened from the inside in a situation of panic, it can then also be also opened from the outside using the handle. Ø 11.25 25 ò9 62 72 72 62 94.5 19 15 Ø5, 186.5 6 Ø 7.25 27 5 Ø5, 65 19.5 16.5 17 *. *Measurement 17 mm, including rivets Non-handed. Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
Mortise Lock Designed for use with top for wooden and steel doors and BMH locking system for fire protection doors No. 000 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm PZW : lock for profile cylinder with latch and double throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt Shot bolt extension to faceplate 0, 45, 65 mm, depending on the backset Available s 65, 80, 100 mm EN MPA NRW on request other backsets Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 2007 042-BPR-0116 EN:2004 M 5 1 0 F H C 2 0. X Shoot Bolt No. 1102/110, with locking spring, 1 mm stroke Ø10 5 10 285 259 5 50 2 10 22 11 ò9 8 21.5 46 29 8 72 8 215 6.2(.2) 6.8(.8) (20) 65 80 Measurement X 0 45 100 65 4(1) M6 15.5 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.4
BMH Panic Lock Designed for use with top locking system Panic function: Transmission Function E for wooden and steel doors and fire protection barriers No. 0 PZW Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm stainless steel Shot bolt extension to faceplate Available s PZW : lock for profile cylinder and double 0, 45, 65 mm, 65, 80, 100 mm throw dead bolt depending on backset KW : lock for Kaba or Keso cylinder (centres 74 mm) and double throw dead bolt EN 179 MPA NRW. on request other backsets Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion E 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a fixed knob on the outside. The latch bolt, dead bolt and shoot bolt can be drawn back using the key. When the door is closed, it is locked on the outside by the latch bolt and shoot bolt. The door can only be opened using the key. The door is opened by drawing back the latch bolt and the shoot bolt using the key. The door can also be locked and unlocked using the key. X Shoot Bolt No. 1102/110, with locking spring, 1 mm stroke Ø10 5 285 259 10 5 50 2 22 11 ò9 8 29 10 21.5 46 8 72 8 215 6.2(.2) 6.8(.8) (20) 65 80 Measurement X 0 45 100 65 4(1) M6 15.5 Shows DIN left-hand DIN right-hand is reverse.5 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Panic Lock Designed for use with top locking system Panic function: Transit Function D for wooden and steel doors and fire protection barriers No. 0 PZ Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm stainless steel split follower Shot bolt extension to faceplate Available s PZ : lock for profile cylinder and single throw 0, 45, 65 mm, 65, 80, 100 mm dead bolt depending on backset K : lock for Kaba or Keso cylinder (centres 74 mm) and single throw dead bolt EN 179 MPA NRW on request other backsets Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion D 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has inside a handle. The lock will be locked and unlocked with a key. Even if locked in case of panic the dead bolt, the shoot bolt and the latch bolt can be retracted simultaneously through the handle. The door can be opened. ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. If unlocked, the latch bolt and shoot bolt can be drawn back using the handle and the door can be opened. When the door is opened from the inside in a situation of panic, it can then also be also opened from the outside using the handle. The door is not secured when closed. The door must be locked using the key to ensure it cannot be opened.. X Shoot Bolt No. 1102/110, with locking spring, 1 mm stroke Ø10 5 10 285 259 215 5 72 6.8(.8) 8 29 10 8 2 ò9 46 50 22 11 21.5 6.2(.2) 8 (20) 65 80 Measurement X 0 45 100 65 4(1) M6 15.5 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.6
BMH Panic Lock Designed for use with top locking system Panic function: Changeover Function B for wooden and steel doors and fire protection barriers No. 028 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm split-follower Shot bolt extension to faceplate Available s PZ : lock for profile cylinder and single throw dead bolt K : lock for Kaba or Keso cylinder (centres 74 mm) and single throw dead bolt 0, 45, 65 mm, depending on backset 65, 80, 100 mm EN 179 MPA NRW. on request other backsets Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion B 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the shoot bolt and the latch bolt can be drawn back simultaneously using the handle and the door can then be opened. If the lock has been locked using the key and the door has then been opened from the inside using the anti-panic function, the door is secured against opening from the outside (the dead bolt is still drawn back and the follower is not engaged, therefore the latch is still securing the door). ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. The lock is switched to the transit function by turning the key back twice. The door can now be opened. When the key is turned forward once or twice, the lock is switched to the closed function. The door can now only be opened with the key. If the key is turned forward once, the door is secured by the latch bolt and the shoot bolt; if it is turned twice, the door is secured by the latch bolt, the shoot bolt and the dead bolt. X Shoot Bolt No. 1102/110, with locking spring, 1 mm stroke Ø10 5 10 285 259 5 50 2 10 11 ò9 8 21.5 46 29 8 72 8 215 6.2(.2) 6.8(.8) 65 80 Measurement X 0 45 100 65 4(1) M6 15.5 (20) Shows DIN left-hand DIN right-hand is reverse.7 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Panic Lock Designed for use with top locking system Panic function: Transmission Function E for the active door leaf in wooden or steel double leaf doors or for fire protection barriers No. 1 PZW Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm stainless steel split follower Shot bolt extension to faceplate Available s PZW : lock for profile cylinder with latch and single 0, 45, 65 mm, 65, 80, 100 mm throw dead bolt depending on the backset KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and single throw dead bolt EN 179 MPA NRW on request other backsets Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion E 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt and the shot bolt can be drawn back simultaneously with the latch bolt using the handle and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a fixed knob on the outside. The latch bolt, dead bolt and shoot bolt can be drawn back using the key. When the door is closed, it is locked on the outside by the latch bolt and the shoot bolt. The lock can only be opened using the key. The door is opened by drawing back the latch bolt and the shoot bolt using the key. The door can also be locked and unlocked using the key.. X Shoot Bolt No. 1102/110, with locking spring, 1 mm stroke Ø10 5 285 10 10 259 5 50 2 4 11 ò9 8 29 21.5 46 8 72 8 215 6.2(.2) 6.8(.8) (20) 65 80 Measurement X 0 45 100 65 4(1) M6 15.5 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.8
BMH Panic Lock Designed for use with top locking system Panic function: Transit Function D for the active door leaf of wooden or steel double leaf doors or for fire protection doors No. 1 PZ Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm stainless steel split follower Shot bolt extension to faceplate Available s PZW : lock for profile cylinder and single throw 0, 45, 65 mm, 65, 80, 100 mm dead bolt depending on the backset KW : lock for Kaba or Keso cylinder (centres 74 mm) and single throw dead bolt EN 179 MPA NRW. on request other backsets Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion D 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt, the shot bolt and the latch bolt can be drawn back simultaneously using the handle and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a fixed knob on the outside. The lock is locked and unlocked using a key. If unlocked, the latch bolt and dead bolt can be drawn back using the handle and the door is opened. When the door is opened from the inside in a panic situation, the door can be also opened from the outside using the handle. The door is not secured when closed. The door must be locked using the key to ensure it cannot be opened. X Shoot Bolt No. 1102/110, with locking spring, 1 mm stroke Ø10 285 259 215 5 72 4 6.8 (.8) 8 5 10 29 10 8 2 ò9 46 6.2 (.2) 50 11 21.5 8 (20) 65 80 Measurement X 0 45 100 65 4(1) M6 15.5 Shows DIN left-hand DIN right-hand is reverse.9 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
Panic Lock Designed for use with for the active door leaf in wooden top locking system or steel double leaf doors or BMH Panic function: Changeover Function B for fire protection barriers No. 8 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm split follower Shot bolt extension to faceplate Available s PZ : lock for profile cylinder and single throw dead bolt K : lock for Kaba or Keso cylinder (centres 74 mm) and single throw dead bolt 0, 45, 65 mm, depending on the backset 65, 80, 100 mm EN 179 MPA NRW on request other backsets Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion B 2004 EN179:1997 +A1:2001 7 6 1 1 4 1 A ó FUNCTION FROM THE INSIDE The door has a handle on the inside. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt, the shoot bolt and the latch bolt can be drawn back simultaneously using the handle and the door can then be opened. If the lock has been locked using the key and the door has then been opened from the inside using the antipanic function, the door is secured against opening from the outside (the dead bolt is still drawn back and the follower is not engaged, therefore the latch is still securing the door).. ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. The lock is switched to the transit function by turning the key back twice. The door can now be opened. When the key is turned forward once or twice, the lock is switched to the closed function. The door can now only be opened with the key. If the key is turned forward once, the door is secured by the latch bolt and the shoot bolt; if it is turned twice, the door is secured by the latch bolt, the shoot bolt and the dead bolt. X Shoot Bolt No. 1102/110, Countersink DIN74-Am with locking spring, 1 mm stroke 285 259 215 5 72 4 6.8 (.8) 8 Ø10 5 10 29 10 8 2 ò9 46 6.2 (.2) 50 11 21.5 8 65 80 Measurement X 0 45 100 65 4(1) M6 15.5 (20) Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.0
Panic Lock Designed for use with top locking system for wooden and steel doors and BMH Panic function: Transmission Function E fire protection barriers No. 40 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm Shot bolt extension to faceplate Available s PZW : lock for profile cylinder with latch and double throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) with latch and double throw dead bolt 0, 45, 65 mm, depending on the backset 65, 80, 100 mm EN 15 MPA NRW. on request other backsets Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0040 Panikfunktion E 2004 EN15:1997 +A1:2001 7 6 1 1 2 1 A ó FUNCTION FROM THE INSIDE The door has a panic bar on the inside. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt and the shoot bolt can be drawn back simultaneously with the latch bolt using the panic bar and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a fixed knob on the outside. The latch bolt, dead bolt and shoot bolt can be drawn back using the key. When the door is closed, it is locked on the outside by the latch bolt and the shoot bolt. The lock can only be opened using the key. The door is opened by drawing back the latch bolt using the key. The door can also be locked and unlocked using the key. X Shoot Bolt No. 1102/110, with locking spring, 1 mm stroke Ø10 5 285 259 5 50 2 10 22 11 ò9 8 21.5 46 29 10 8 72 8 215 6.2(.2) 6.8(.8) (20) et 65 80 urement X 0 45 100 65 4(1) M6 15.5 Shows DIN left-hand DIN right-hand is reverse.1 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
Panic Lock Designed for use with top locking system for wooden and steel doors BMH Panic function: Transit Function D and fire protection barriers No. 40 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm split-follower Shot bolt extension to faceplate Available s PZW : lock for profile cylinder and double throw dead bolt KW : lock for Kaba or Keso cylinder (centres 74 mm) and double throw dead bolt 0, 45, 65 mm, depending on the backset 65, 80, 100 mm EN 15 MPA NRW on request further backsets Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0040 Panikfunktion D 2004 EN15:1997 +A1:2001 7 6 1 1 2 1 A ó FUNCTION FROM THE INSIDE The door has a panic bar on the inside. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the shoot bolt and the latch bolt can be drawn back simultaneously using the panic bar and the door can then be opened. ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. If unlocked, the latch bolt and the shoot bolt can be drawn back using the handle and the door can be opened. When the door is opened from the inside in a situation of panic, it can then also be also opened from the outside using the handle. The door is not secured when closed. The door must be locked with the key to ensure the door cannot be opened.. X durch Shoot Bolt No. 1102/110, with locking spring, 1 mm stroke Ø10 5 10 29 10 8 2 ò9 46 285 259 215 5 72 6.8(.8) 8 50 22 11 21.5 6.2(.2) 8 (20) 65 80 Measurement X 0 45 100 65 4(1) M6 15.5 Shows DIN left-hand DIN right-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.2
BMH Panic Lock Designed for use with top locking system Panic function: Changeover Function B for wooden and steel doors and fire protection barriers No. 4028 Faceplate Case Latch bolt Dead bolt Follower 65 mm 20, mm, enclosed, zinc-coated steel, nickel-plated steel, nickel-plated 9 mm stainless steel split follower Shot bolt extension to faceplate Available s PZ : lock for profile cylinder and double throw dead bolt 0, 45, 65 mm, 65, 80, 100 mm K : lock for Kaba or Keso cylinder (centres 74 mm) depending on the backset and double throw dead bolt EN 15 MPA NRW. on request other backsets Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0040 Panikfunktion B 2004 EN15:1997 +A1:2001 7 6 1 1 2 1 A ó FUNCTION FROM THE INSIDE The door has a panic bar on the inside. The lock is locked and unlocked using a key. Even if locked, in the event of a panic situation, the dead bolt, the shoot bolt and the latch bolt can be drawn back simultaneously using the panic bar and the door can then be opened. If the lock has been locked using the key and the door has then been opened from the inside using the anti-panic function, the door is secured against opening from the outside (the dead bolt is still retracted and the follower is not engaged, therefore the latch bolt and the shoot bolt are still securing the door). ó FUNCTION FROM THE OUTSIDE The door has a handle on the outside. The lock is locked and unlocked using a key. The lock is switched to the transit function by turning the key back twice. The door can now be opened. When the key is turned forward once or twice, the lock is switched to the closed function. The door can now only be opened with the key. If the key is turned forward once, the door is secured by the latch bolt and the shoot bolt; if it is turned twice, the door is secured by the latch bolt, the shoot bolt and the dead bolt. X Shoot Bolt No. 1102/110, with locking spring, 1 mm stroke Ø10 5 285 259 10 5 50 2 10 11 ò9 8 29 21.5 46 8 72 8 215 6.2(.2) 6.8(.8) 65 80 100 4(1) M6 15.5 (20) Shows DIN left-hand Measurement X 0 45 65 DIN right-hand is reverse. Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Panic Keep for automatic locking of the active door leaf in wooden or steel double leaf doors No. 10 Faceplate Case Follower Shot bolt extension to faceplate Available s 65 mm 20, mm, stainless steel enclosed, zinc-coated 9 mm 0, 45, 65 mm, depending on the backset 65, 80, 100, 0, 5 mm on request Angled faceplate Tabbed faceplate Blank faceplate Other shoot bolt extensions to the faceplate Electric status check EN 179 MPA NRW ó FUNCTION When the handle is pressed down, the shoot bolts are drawn back and the latch bolt and the dead bolt in the lock in the active door leaf are pushed back. Both door leafs can then be opened. When the handle is used, the shoot bolts are pushed forward again by a spring action.. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0041 Panikfunktion 2004 EN179:1997 +A1:2001 6 6 1 1 4 1 A.5 max. 62.5 48 25 Ø10 (20) 20 (22x) (20x) 2.8 5 98 51.5 0 50 4.6 (.0) 4.6 (.0) 1.7 4.6 60.5 165 19 19 2.5 ò9 Ø7.5 4 (2.5) 20 15.5 M6 X Measurement X 65 80 100 0 45 65 Shows DIN right-hand DIN left-hand is reverse 1 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.4
for manual locking of the active door leaf in wooden or BMH BMH Panic Keep steel double leaf doors No. 11 Faceplate Case Follower Shot bolt extension to faceplate Available s 65 mm 20, mm, stainless steel enclosed, zinc-coated 9 mm 0, 45, 65 mm, depending on the backset 65, 80, 100, 0, 5 mm on request Angled faceplate Tabbed faceplate Blank faceplate Other shoot bolt extensions to the faceplate Electric status check ó FUNCTION When the handle is pressed down, the shoot bolts are drawn back and the latch bolt and the dead bolt in the lock in the active door leaf are pushed back. Both door leafs can now be opened. After the handle is used, the shoot bolts will remain drawn in. When the handle is pulled up, the shoot bolts are extended again...5 max. 62.5 48 2.8 5 98 25 51.5 0 50 4.6 (.0) 4.6 (.0) 1.7 4.6 60 165.5 2.5 19 19 ò9 Ø7.5 Ø10 (20) 20 (22x) (20x) 20 15.5 M6 1 4 (2.5) X 65 Measurement X 0 80 45 100 65 Shows DIN right-hand DIN left-hand is reverse.5 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Panic Keep - dead bolt only - for automatic () or manual (1) locking of the active door leaf in wooden or steel double leaf doors No. No. 1 Faceplate Case Follower Shot bolt extension to faceplate Available s 65 mm 20, mm, stainless steel enclosed, zinc-coated 9 mm 0, 45, 65 mm, depending on the backset 65, 80, 100, 0, 5 mm on request Angled faceplate Other shoot bolt extensions to faceplate Electric status check ó FUNCTION (NO. ) When the handle is pressed down, the shoot bolts are drawn back and the dead bolt in the lock in the active door leaf is pushed back. Both door leafs can then be opened. After the handle is used, the shoot bolts are pushed forward again by a spring action. ó FUNCTION (NO. 1) When the handle is pressed down, the shoot bolts are drawn back and the dead bolt in the lock in the active door leaf is pushed back. Both door leafs can then be opened. After the handle is used, the shoot bolts will remain drawn in. When the handle is pulled up, the shoot bolts are extended again.. 51.5 98 25 5 165 8 ò9 2.5 19 19 Ø7.5 4.6 Ø10 (20) 4 (2.5) Measurement X 65 80 100 0 45 65 Shows DIN right-hand DIN left-hand is reverse 15.5 M6 X Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.6
BMH Secured Panic Keep for automatic locking of the active door leaf in wooden or steel double leaf doors No. 14 Faceplate Case Follower Shot bolt extension to faceplate available s 65 mm 20, mm, stainless steel enclosed, zinc-coated 9 mm 0, 45, 65mm depending on the backset 65, 80, 100, 0, 5 mm on request Angled faceplate Tabbed faceplate Other shoot bolt extensions to faceplate Electric status check Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0116 2007 EN:2004 L 5 1 0 F - B H 2 0 MPA NRW EN ó FUNCTION When the handle is pressed down, the shoot bolts are drawn back. At the same time, the latch bolt in the lock in the active door leaf is pushed back and the dead bolt is blocked from extending. After the handle is used, a spring action ensures the shoot bolts are pushed forward again and the dead bolt is no longer blocked from extending. The active door leaf can only be locked after the inactive door leaf is completely locked...5 max. 62.5 48 4.6 4 (2.5) 2.8 5 98 25 50 0 51.5 4.6 (.0) 4.6 (.0) 1.7 60 165.5 19 19 2.5 ò9 Ø7.5 Ø10 (20) 20 (22x) (20x) 20 15.5 M6 X Measurement X 65 0 80 45 100 65 Shows DIN right-hand DIN left-hand is reverse 1 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.7
BMH Secured Panic Keep for manual locking of the active door leaf in wooden or steel double leaf doors No. 15 Faceplate Case Follower Shot bolt extension to faceplate available s 65 mm 20, mm, stainless steel enclosed, zinc-coated 9 mm 0, 45, 65, depending on the backset 65, 80, 100, 0, 5 mm on request Angled faceplate Tabbed faceplate Other shoot bolt extensions to the faceplate Electric status check ó FUNCTION When the handle is pressed down, the shoot bolts are drawn back. At the same time, the latch bolt in the lock in the active door leaf is pushed back and the dead bolt is blocked from extending. After the handle is used, the shoot bolts will remain drawn in and the dead bolt is still blocked from extending. When the handle is pressed upwards, the shoot bolts are pushed forward again and the dead bolt is no longer blocked from extending. The active door leaf can only be locked after the inactive door leaf is completely locked...5 max. 62.5 48 4.6 15.5 M6 X Measurement X 65 80 100 0 45 65 1 25 51.5 4.6 (.0) 4.6 (.0).5 20 (20) (22x) (20x) 2.8 5 98 50 0 1.7 60 165 19 19 2.5 ò9 Ø7.5 Ø10 4 (2.5) 20 Shows DIN right-hand DIN left-hand is reverse.8 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Secured Panic Keep - dead bolt only for manual locking of the active door leaf in wooden or steel double leaf doors No. 16 No. 17 Faceplate Case Follower Shot bolt extension to faceplate available s 65 mm 20, mm, stainless steel enclosed, zinc-coated 9 mm 0, 45, 65mm, depending on the backset 65, 80, 100, 0, 5 mm on request Angled faceplate Other shoot bolt extensions to faceplate Electric status check ó FUNCTION (NO. 16) When the handle is pressed down, the shoot bolts are drawn back while the dead bolt is blocked from extending. After the handle is used, a spring action ensures the shoot bolts are pushed forward again and the dead bolt is no longer blocked. The active door leaf can only be locked after the inactive door leaf is completely locked. ó Function (No. 17) When the handle is pressed down, the shoot bolts are drawn back while the dead bolt is blocked from extending. After the handle is used, the shoot bolts will remain drawn in and the dead bolt is still blocked from extending. When the handle is pressed upwards, the shoot bolts will be pushed forward again and the dead bolt is no longer blocked from extending. The active door leaf can only be locked after the inactive door leaf is completely locked.. (20) 4 (2.5) 51.5 25 165 8 ò9 98 5 2.5 19 19 Ø7.5 4.6 Ø10 65 80 100 Measurement X 0 45 65 15.5 M6 X Shows DIN right-hand DIN left-hand is reverse Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.9
BMH Deflecting Lock for fitting handles at a higher position of 1500 mm No. 1150 Faceplate Case Follower available s 65 mm 20, mm, zinc-coated 9 mm 65, 80, 100, 0,5 mm stainless steel MPA NRW TO BE USED IN COMBINATION WITH PANIC KEEPS 10, 11,, 1, 14,15, 16, 17, 18, 19, 1152, 115 on request ó FUNCTION The lock is fitted at a height of about 1500 mm in the inactive door leaf of a double leaf door. The shoot bolt which runs through the. deflecting lock is moved up and down by the handle. Countersink DIN 74-Am5 5 Ø10 2.5 19 100 19 ò9 98 7.5 25 (20) X4 (1) 65 80 Measurement X 0 45 100 65 16 15.5 Shows DIN right-hand DIN left-hand is reverse.2 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH BMH Flush Bolt No. 1155 Faceplate Case available s 25 mm 20, mm, stainless steel zinc-coated 25, 0, 5, 40, 45, 50, 54, 65, 70 mm EN MPA NRW on request ó FUNCTION The flush bolt is fitted at a height of about 1500 mm in the inactive door leaf of a double leaf door. The flush bolt is non-handed. The shoot bolts are drawn in using the lever in the lock. After the lever is released, the shoot bolts are pushed forward again due to a spring action and the lever is drawn back into the faceplate. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 2007 042-BPR-0116 EN:2004 L 5 1 0 F - B H 0 0. 170 2.5 Ø10 15 (20) 5() 25 M6 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.
BMH Panic Keep for automatic locking of the active door leaf in wooden or steel double leaf doors No. 60 Faceplate Case Follower 65 mm 20, mm, stainless steel enclosed, zinc-coated 9 mm EN15 MPA NRW Shot bolt extensions to faceplate 0, 45, 65mm, depending on the backset available s 65, 80, 100, 0, 5 mm. on request Electric status check PLEASE NOTE This anti-panic lock is tested according to EN 15 and must only be used with the anti-panic bars and accessories which are specified in our EU Certificate of Conformity 042-BPR-0040. Beyer & Müller GmbH & Co. KG Hauptstraße 277 D-42579 Heiligenhaus 042-BPR-0040 Panikfunktion 2004 EN15:1997 +A1:2001 6 6 1 1 2 1 A ó FUNCTION When the panic bar is pressed down, the shoot bolts are drawn back and the latch bolt and the dead bolt in the lock in the active door leaf is pushed back. Both door leafs can now be opened. After the panic bar has been used, the shoot bolts are pushed forward again due to a spring action. 5 98 48 25 51.5 0 50 4.6 165 19 19 2.5 ò9 Ø7.5 4.6 Ø10 Measurement X 65 80 100 0 45 65 4 (2.5) 15.5 M6 X Shows DIN right-hand DIN left-hand is reverse.4 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Switching Lock No. 11 Faceplate Switching latch Case 20, mm, zinc-coated steel zinc-coated EN15 EN 179 MPA NRW T O BE USED IN COMBINATION WITH PANIC KEEPS 10,, 14, 16, 18, 1152, 60 ó FUNCTION The switching lock is fitted immediately above the automatic panic keep, deflecting lock or rebate retracting bolt at the top of the door leaf. After the door is opened using the door handle or panic bar, the switching lock automatically retains the shoot bolt. This prevents the floor from being damaged. When the door is closed, the switching latch comes into contact with the door frame. The shoot bolts are no longer retained and can extend into the floor strike or into the door frame.. 54 6 42 22 10 90 2.6 Ø5.4 Gap between door leaf and door frame 2 7 mm Ø10 Ø18 Borehole in the door Ø 20 mm 7 Top shoot bolt 1101; 1109.5 (20) Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.5
BMH Top Shoot Bolt BMH Bottom Shoot Bolt No. 1101 No. 1100 BMH Shoot bolt for the top 1101 BMH Bottom Shoot Bolt 1100 D ESIGN steel pipe, zinc-coated, with plug Diameter Thread Length D ESIGN solid steel bar, zinc-coated Diameter Thread Length 10 mm M6 L = 1000, 1500 mm 10 mm M6 L = 1000, 1500 mm T O BE USED WITH Panic keeps Deflecting lock Flush bolt T O BE USED WITH Panic keeps Flush bolt 10, 11,, 1, 1150 1155 10, 11,, 1, 1155 14, 15, 16, 17, 14, 15, 16, 17, 18, 19, 1152, 115 18, 19, 1152, 115. L OCKS FOR S HOOT B OLTS 1000 STA 10 STA-PZW 10 STA-PZ L OCKS FOR S HOOT B OLTS 1000 STA 10 STA-PZW 10 STA-PZ on request EN 15 EN 179 on request EN 179 No. 1101 No. 1100 Ø9.5 Ø10 Ø10 L +0-2 7 L ± Ø 6.7 41.5 40 Ø8 8 M6 The end user needs to cut the M6 shoot bolt to the required length..6 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Bottom Shoot Bolt BMH Spring-loaded Shoot Bolt No. 1104 No. 1109 D ESIGN N O. 1104 steel pipe, zinc-coated D ESIGN N O. 1109 steel pipe, zinc-coated Diameter Thread Length Diameter Thread Length 10 mm M6 L = 966 10 mm M6 with locking spring L = 1000, 1500 mm mm and sliding block T O BE USED WITH Panic keeps 10, 11,, 1, 14, 15, 16, 17, 18, 19, 1152, 115 Flush bolt 1155 T O BE USED WITH Panic keep No. 60 Combined with switching lock No. 11 as top and bottom shoot bolt IN COMBINATION WITH A PLANET BOTTOM SEAL EN 179 EN 15 No. 1104 No. 1109. 5 Ø 9.5 81 Ø10 Ø10 L± 7 Ø6.7 M6 41.5 7 L± 1 Ø10 41.5 M6 Ø11 The end user needs to cut the shoot bolt to the required length. The end user needs to cut the shoot bolt to the required length. Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.7
BMH Shoot Bolt with spring-loaded locking system No. 1102 D ESIGN steel pipe, zinc coated Diameter Thread 10 mm M6 Length L = 15, 85, 165, 1885, 25, 285, 265 mm EN15 EN 179 T O BE USED WITH Locks in the active door leaf designed as a top locking system 000, 0 PZW, 0 PZ, 028, 1 PZW, 1 PZ, 8, 40, 40, 4028 combined with switching lock 11. Ø9.5 Ø10 Door height Length L 2000-2250 15 11 L± 60 Ø10 74 2250-2500 2500-2750 2750-000 000-250 250-500 500-750 85 165 1885 25 285 265 The end user needs to cut the shoot bolt to the required length. Sleeves are used to adjust the weight for different lengths of shoot bolts. The number of sleeves depends on the length of the shoot bolt. 11Ø M6.8 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Spring-loaded Shoot Bolt No. 110 D ESIGN steel pipe, zinc-coated Diameter Thread 10 mm M6 Length L = 15, 85, 165, 1885, 25, 285, 265 mm EN15 EN 179 T O BE USED WITH Locks in the active door leaf designed as a top locking system 000, 0 PZW, 0 PZ, 028, 1 PZW, 1 PZ, 8, 40, 40, 4028 combined with tubular mortise latchno. 1195 or No. 1196. Ø10 Door height Length L 2000-2250 15 11 L± 60 Ø10 74 2250-2500 2500-2750 2750-000 000-250 250-500 500-750 85 165 1885 25 285 265 The end user needs to cut the shoot bolt to the required length. Sleeves are used to adjust the weight for different lengths of shoot bolts. The number of sleeves depends on the length of the shoot bolt. 11Ø M6 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.9
BMH Connecting Bar No. 1105 No. 1108 BMH CONNECTING B AR N O.1105 Sheet of steel mm thick Length L = 520 mm BMH CONNECTING B AR N O.1108 Stahlblech mm thick Length according to customer requirements for measurement a and b EN 179 EN 179 USE To connect Main Lock 102 or 1027 with Slave Lock 10 when fitting handles at 450 mm above the main lock USE To connect Main Lock 101,104 or 105 with Slave Lock 10. No. 1105 No. 1108 x x 450 520± Slave lock for door handles fit 450 mm above the main lock. Master lock (1050 mm above floor) 1050 450 Measurement b Measurement a OFF.150 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Connecting Bar BMH Latch Retracting Block No. 1106 No. 1107 BMH CONNECTING B AR N O.1106 Sheet of steel mm thick Length L = 1645, 1895, 25 mm BMH LATCH R ETRACTING B LOCK N O.1107 Finish Accessories steel, zinc-coated 1 pin with thread M6 x 6, DIN 916 (with ring edge), 1 pin with thread M6 x 10 DIN 915 with pivot EN 179 USE To connect Main Lock 1020, 1022, 1025, 1026, 1027 or 12 with Slave Locks 100 or 102. USE For Panic -Latch Locking System 12 in combination with Slave Lock 100. EN 179 ó FUNCTION The latch retracting blocks (2 units each) are used for anti-panic latch locking systems in double leaf doors. They are screwed onto the shoot bolts. When the door handle is pushed on the inactive door leaf, the latch retracting blocks push back the latches in the slave locks in the active door leaf and unlock the active door leaf.. No. 1106 No. 1107 x.5 Ø10.1 50 40 9.1 1050 9 L 271 M6 A M6.5 5 9 8 19 a 40 1 OFF Door height L A 1972 1645 7 2222 1895 96 72 25 Measurement a 65 40 80 100 55 75 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.151
BMH Floor Strike BMH Spring-loaded Floor Strike No. No. 19 BMH FLOOR S TRIKE N O. Deep-drawn, stainless steel with 4 holes for screws BMH SPRING- L OADED F L OOR S TRIKE NO.19 Steel T O BE USED WITH Panic strikes 10, 11,, 1, 14, 15, 16, 17, 18, 19, 1152, 115 Flush bolt 1155 EN 179 USE The spring-loaded floor strike enables an inactive door leaf in a manual locking system to be secured in a precise position. The spring-loaded ball prevents the floor strike from getting dirty when the active door leaf is opened. EN 179. ó FUNCTION The conical shape of the floor strike ensures the door rests firmly when in the closed position. The wider side is positioned so it faces the direction in which the active door leaf opens. No. No. 19 90 Ø5 1 Ø 0 100 80 10 56 9 6 15 16 1.5 4 2.5 20 2.5 Ø6 52 2 R8 Ø17 60 20 Ø20.152 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Floor Sleeve Continuously adjustable No. 1192 D ESIGN stainless steel Deep-drawn, stainless steel with 2 holes for screws T O BE USED WITH Panic keeps 10, 11,, 1, 14, 15, 16, 17, 18, 19, 1152, 115, 60 Flush bolt 1155 ó FUNCTION The interior cylinder can be adjusted by undoing the screw, enabling a perfect fit in the rebate. It can be continuously adjusted +/- 1.5 mm in the x or y direction. EN 179 EN15 No. 1192. 80 20 50 Ø5. 60 25 4 1.6 0 Ø Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.15
BMH Shoot Bolt Striking Plate BMH Shoot Bolt Guide No. No. 14 BMH SHOOT B OLT S TRIKING P LATE N O. Faceplate 20 x 52 mm, zinc-coated BMH SHOOT B OLT G UIDE N O. 14 Faceplate 20 x 60 mm, zinc coated with nylon sleeve to reduce noise U SED WITH EN 179 EN15 Panic keeps Deflecting lock Non-handed 10, 11,, 1, 14, 15, 16, 17, 18, 19, 1152, 115, 60 1150 Flush bolt 1155 Locks in active door leaf 1000 STA, 10 STA-PZ, 10 STA-PZW. EN 179 EN 15 PLEASE NOTE 1 unit is required for automatic locking in the inactive door leaf 2 units are required for manual locking in the inactive door leaf, or if used in the active door leaf. No. No. 14 52 60 7.5 7 50 15 10 20 20 11.5 20 Ø15 Ø10.5.154 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Striking Plate No. 15 No. 16 BMH STRIKING P LATE N O.15 x x 25 mm, stainless steel BMH STRIKING P LATE N O.16 x x 0 mm, stainless steel U SE EN15 As cover for Latch Retracting Blocks no. 1107 and as striking plate for Slave Latch Locks 100 and 102. EN 179 No. 15 No. 16. 48 4.6 25 6 4.6 51.5 0 20 16 0.75 72.5.75 16 (55.5) 10 0 10 DIN left-hand Shows DIN left-hand DIN right-hand is reverse Non-handed Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.155
BMH Striking Plate BMH Angled Striking Plate No. 18 No. 1165 D ESIGN U SE 20 x x 100 mm, stainless steel As striking plate for Switching Lock 11, Tubular Mortise Latch 1195 or 1196 EN 179 EN15 No. 18 100 10 80 19 4.5 62 20.5 R2 t=. 20 60 Non-handed D ESIGN U SE 20 x 20 x x 170 mm, stainless steel For locks in the active door leaf EN 179 EN15 No. 1165 R10 20 10 R10 20 50 0 50 15 R5 76 76 4 9 170 0 15 2 20 Ø5 Ø8 90 R0.5.156 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
Spring-loaded BMH Tubular Mortise Latch No. 17 BMH D ESIGN U SED WITH Faceplate Latch bolt Case Panic keeps Deflecting lock Flush bolt 20, mm, steel zinc-coated steel, zinc-coated steel, zinc-coated 10, 11,, 1, 1150 1155 14, 15, 16, 17, 18, 19, 1152, 115 ó FUNCTION Automatic locking of the inactive door leaf at the top of the door frame only (also using electric door strike). The door is opened manual using the deflecting lock and / or the panic keep or the flush bolt. EN 179 MPA NRW. 18 18 5 0 Ø.8 68 54 4 15 1 4 18 ò 25 M 5 Angled faceplate optional 20.5 22.7 5.1 ò1 5 M 5 15 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.157
BMH Striking Plate No. 1178 BMH Striking Plate No. 1178 D ESIGN x x 25 mm, steel zinc-coated EN15. No. 1178 16 92.5.2 25 50 4.9 92.5 t = Non-handed.158 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
BMH Tubular Mortise Latch No. 1195 D ESIGN Faceplate Latch bolt Case 20, mm, zinc-coated steel, zinc-coated steel, zinc-coated EN 179 MPA NRW ó FUNCTION (FOR LOCKING ACTIVE DOOR LEAF) Automatic locking at the top of the active door leaf. The tubular mortise latch No. 1195 locks the door to the door frame. ó FUNCTION (FOR LOCKING INACTIVE DOOR LEAF) Automatic locking of the inactive door leaf at the top of the door frame only. The door is unlocked manually using the deflecting lock or the flush bolt. T O BE USED WITH Locks in the active door leaf designed for locking at the top of door 000, 0 PZW, 0 PZ, 028, 1 PZW, 1 PZ oder 8 U SED WITH Panic keeps 10, 11,, 1, 14, 15, 16, 17, 18, 19, 1152, 115 Deflecting lock 1150 Flush bolt 1155. Combined with Spring-loaded Shoot Bolt No. 110. Combined with Top Shoot Bolt No. 1101 5 11 Countersink DIN 74-Am5 C 6.5 Boreholes in the door Ø 20 mm (40 mm deep) 27 (Shoot bolt) Ø10 ò15 Connector for the shoot bolt Ø B A A B 54 42 54 42 C 20 Non-handed Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de.159
Spring-loaded BMH Tubular Mortise Latch No. 1196 D ESIGN Faceplate Latch bolt Case U SED WITH Panic keeps Deflecting lock Flush bolt 20, mm, zinc-coated steel, zinc-coated steel, zinc-coated 10, 11,, 1, 14, 15, 16, 17, 18, 19, 1152, 115 1150 1155 Combined with shoot bolt for the top No. 1101 ó FUNCTION Automatic locking of the inactive door leaf at the top of the door frame only (also using electric door strike). The door is opened manually using the deflecting lock and / or the panic keep or the flush bolt. EN 179 MPA NRW. 5 11 Countersink DIN 74-Am5 C 6.5 Boreholes in the door Ø 20 mm (40 mm deep) 27 (Shoot bolt ) Ø10 ò15 Connector for the shoot bolt Ø B A A B 54 42 54 42 C 20 Non-handed.160 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
I NSTRUCTIONS FOR USING BMH LOCKS AND DOOR HANDLES 4.
Instructions for using BMH locks and door handles 1. Do not drill any holes 1. Do in the not 1. Do door drill not any leaf drill holes where any holes 1. in Do a lock the not 1. door in Do has drill the not already leaf any door drill where holes leaf any where holes ain been lock the fitted adoor has in lock the already leaf has door where already leaf where been a lockfitted been has a lock already fitted has already been fitted been fitted 2. Do not use force 2. Do not 2. Do toinsert use not force use the force spindle toinsert through the spindle follower 2. Do not 2. toinsert Do use not force use the force spindle through toinsert through toinsert the the follower spindle the the follower spindle through through the follower the follower. Do not. Do carry not the carry door the door 4. The4. distance The distance between between. leaf Do not by. leaf Do the carry not by door the carry handles door the handles door 4. faceplate The distance 4. faceplate The and distance between striking and between striking plate plate leaf by leaf the door by the handles door handles should faceplate should faceplate be and 2 be 5 striking mm 2 and 5 striking mm plate plate should should be 2 5 be mm 2 5 mm 2-5 mm 2-5 mm 2-5 mm 2-5 mm 4. 5. Do not 5. Do paint not over paint the over dead the dead 5. bolt Do not and 5. bolt Do paint the not and latch over paint the the bolt latch over dead bolt the dead bolt and bolt the and latch the bolt latch bolt 6. Th e 6. door Th e handle door handle should should 6. beopened Th e 6. door beopened Th e handle in door the handle correct in should the correct should direction beopened direction beopened only. in the Do only. correct in not the Do exceed correct not exceed amaximum direction amaximum direction only. force Do only. of not force 150 Do exceed of N not 150 exceed N on amaximum the on door amaximum the handle. force door handle. of force 150 N of 150 N onthe onthe door handle. door handle. 150 N150 N 150 N150 N Hinweise Hinweise 1 1 Beyer & Müller GmbH Hinweise & Co. Hinweise 1KG. Hauptstraße 1 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de 4.1
Instructions for using BMH locks and door handles 7. 7. The The lock lock should be be operated 7. 7. using The lock the the should corresponding be be operated key key only only and using and not not the the another corresponding key key or or a tool. a key key tool. only 7. The lock should be operated and not not another key key or or a a tool. using the corresponding key only and not another key or a tool. 8. 8. The The dead dead bolt bolt should be be always 8. 8. drawn The dead back back bolt when should the the be door be door always is is open open drawn back when the the door is isopen 8. The dead bolt should be always drawn back when the door is open 4. 9. 9. Door Door handle and and key key should not not 9. 9. beused Door handle at at the the and same key key time should time not not beused at at the the same time 10. 10. Do Do not not use use thumb turn turn or or 10. 10. turn Do Do turn not knob not knob use use cylinders thumb turn with with or or anti-panic turn knob cylinders locks. Only Only with exceptions are anti-panic are locks which locks. are Only are exceptions specially are are locks designed which are are for for such specially such cylinders designed for for such cylinders 11. 11. Do Do not not leave the the key key 11. 11. inanti-panic Do Do not not leave locks the the key key inanti-panic locks.. The The panic function should.. only The only be panic be used used function to to open open should anti-panic locks only be in be in used the the event to to open of of an anti-panic emergency. locks in in the the The event The panic of of an an function isnot emergency. designed The for panic for permanent function use. isnot use. To designed To open open the the for door for door permanent under normal use. To To circumstances, open the the door under the normal the locks circumstances, should be be unlocked the the locks with should with the the be key be key and unlocked and then then opened with the the using key key the and the door then door handle opened or using or the the panic door handle bar. bar. or or the thepanic bar. 4.2 Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de
Instructions for using BMH locks and door handles. Do not use force onthe inactive door leaf to open double leaf doors. The lock must be replaced immediately if it shows any signs of having been forced 15. Locks should be lubricated with non-resinating oil atleast once a year 4. Beyer & Müller GmbH & Co. KG. Hauptstraße 277. 42579 Heiligenhaus. Tel. + 49(0)20 56.917-0. Fax + 49(0)20 56.917-44. www.beyer-und-mueller.de 4.
since 1887 Beyer & Müller GmbH & Co. KG Hauptstraße 277 42579 Heiligenhaus Phone + 49 (0) 20 56.917-0 Fax + 49 (0) 20 56.9 17-44 www.beyer-und-mueller.de info@beyer-und-mueller.de