Intrsion Alarm Systems Modlar Alarm Platform 000 Overview Modlar Alarm Platform 000 Overview wwwboschsecritycom Provides an intitive control center toch screen ser interface in German, English, French, or Dtch Spports p to 8 LSN Gateways, with p to 27 devices each Spports p to 00 areas, 00 addresses, and 000 sers Spports central station commnication throgh the AT 2000 Commnicator Connects to management systems sch as Bilding Integration System (BIS) The Modlar Alarm Platform 000 system is a scalable soltion for medim-to-large applications The system ses two isolated Bosch Data Bses (BDBs) based on Controller Area Network (CAN) technology, for maximm secrity and flexibility Users can arm and disarm the system sing Bosch SmartKey systems Each control center is ergonomically designed with a graphical color toch screen A MAP 000 system can be flly integrated into a bilding management system like the Bosch Bilding Integration System (BIS) throgh Internet Protocol (IP) The architectre expands easily to inclde new reqired intrsion or hold p devices Users can rely on the same intitive control center interface within an expanded architectre System overview
2 Modlar Alarm Platform 000 Overview 6 0 2 Internal Bosch Data Bs (BDB) This is the internal backbone of the modlar system, providing interoperability between the varios MAP modles It is limited to 6 m (9 ft) in total length External Bosch Data Bs (BDB) This bs spans across the premises to connect control centers, LSN Gateways, and spervised remote power spplies It can be p to 000 m (280 ft) in total length MAP Control Center (IUI MAP000) Up to 2 control centers 7 8 9 2 0 2 Ethernet Connection This allows the MAP system to connect to a management system sch as the Bosch Bilding Integration System (BIS) and to programming software sch as the Bosch Remote Programming Software (RPS) Fnctions Arming and Disarming Users can arm or disarm the system sing Bosch SmartKey systems The nmber of SmartKey sers is limited by the specific SmartKey devices p to a MAP system maximm of 996 SmartKey sers Users can also arm or disarm the system sing the MAP Control Center (IUI MAP000) For each ser, a preferred langage (English or German) is selected When the ser logs in, the preferred langage is sed at the control center The MAP system spports p to 2 control centers and p to 000 sers MAP Panel Enclosre Kit (ICP MAP00) 2 MAP 000 Main Panel (ICP MAP000) Spports wired inpts, tamper inpt, power drive otpts, dry contact otpts, power spply inpt, axiliary power otpt, bs connectors, installer btton, and Ethernet jack MAP DE Modle (ICP MAP0007) Spports AT 2000 Commnicator and DR2020 Printer connectivity, provides three flly spervised and programmable otpts (intended for sirens, strobes, and other local notification devices), and provides two open collector otpts AT 2000 Commnicator DR2020 Printer 6 Sirens, Strobes, and Local Notification Devices 7 MAP LSN Gateways (ICP MAP000) The Modlar Alarm Platform 000 soltion spports a maximm of eight gateways Each gateway spports one loop or two stb configrations 8 MAP Power Spply 0W (IPP MAP000) This is the local power spply for the MAP 000 Main Panel It has two individally spervised battery circits, each capable of spporting 2 V, 0 Ah Additional remote power spplies can be placed on the external Bosch Data Bs (BDB) 9 Batteries The MAP Panel Enclosre Kit (ICP MAP00 ) hoses either: two 2 VDC, 0 Ah batteries in series on one of the two battery circits, or for 2 VDC, 8 Ah batteries with two batteries in series on each of the battery circits Addresses The MAP system spports p to 00 addresses An address represents a single inpt, single otpt, or a single tamper inpt Any combination of inpts, otpts, and tamper inpts can be sed to realize the maximm nmber of 00 addresses system wide Notice Bosch Data Bs devices do not cont toward the 00 available addresses Bosch Data Bses with CAN Technology The MAP system ses two data bses which have CAN technology and are sed to connect devices to the MAP 000 Main Panel (ICP MAP000) The first BDB, which can be p to 6 m (9 ft) in length from the main panel, is the internal backbone of the modlar system, providing interoperability between the varios MAP modles A second, isolated BDB, which can be p to 000 m (280 ft) in length from the main panel, is the external bs, spanning across the premises to connect control centers and spervised remote power spplies Firmware Upgrades The firmware of all devices in the MAP system can be pgraded or pdated with the Bosch Remote Programming Software (RPS) This allows for on site or off site (IP throgh Ethernet) pgrades or pdates
Modlar Alarm Platform 000 Overview Langages For each ser, a preferred langage (German, English, French, or Dtch) is selected when the ser is created When the ser logs in, the preferred langage is sed at the control center Commnication with Bosch Secrity Systems, Inc Software Packages The MAP system allows separate commnication with Bosch BIS and RPS software packages Bosch Bilding Integration System (BIS) The MAP system can report alarm and troble events, and share its ser database with the Bosch Bilding Integration System (BIS) for fll integration of the secrity system in the BIS application Bosch Remote Programming Software (RPS) Programming and diagnostic software for control panels that provides remote programming, event log record storage, remote control, and trobleshooting options Parts inclded Components Located in Panel Enclosre 7 2 Certifications and approvals 6 The system is designed to comply with the certifications and standards listed here Region Certification 8 Germany VdS- G VdS-S Sbmitted for approval 9 Region Certification Erope CE 200/08/EC EMC Directive (EMC), 2006/9/EC Low-voltage Directive (LVD) Germany VdS-S S 206 C MAP 000 Installation/configration notes 7 0 Compatibility Information Software and Systems Bosch Bilding Integration System (BIS) Bosch Remote Programming Software (RPS) LSN Peripherals Bosch LSN peripherals Wiring Considerations for Devices on the External Bosch Data Bs 06 mm 2 0 mm 2 (8 AWG 22 AWG) Solid or stranded Twisted or ntwisted Shielded or nshielded Up to 000 m (280 ft) Each peripheral device has two sets of Bosch Data Bs terminals for daisy chain in/ot wiring Peripheral devices are gronded throgh the Bosch Data Bs cable MAP Panel Enclosre Kit (ICP MAP00) 2 MAP 000 Main Panel (ICP MAP000) MAP Hinged Monting Plate (ICP MAP002) Monting plate swings open to provide access to internal wiring MAP DE Modle (ICP MAP0007) Docment Tray Storage area for literatre 6 MAP LSN Gateway Modles (ICP MAP000) Up to for LSN Gateway Modles fit on the hinged bracket 7 Batteries 8 AT 2000 Commnicator monted on the MAP Accessory Monting Plate (ICP-MAP0020) 9 MAP Panel Enclosre Tamper Switch (ICP MAP000) 0 MAP AC Terminal Block (ICP-MAP006) MAP Power Spply 0W (IPP MAP000)
Modlar Alarm Platform 000 Overview Components Located in a Power Enclosre A power enclosre kit comes with the enclosre with a tamper switch and lockset, a MAP AC Terminal Block, and assorted cables It can hold a MAP Power Spply 0W and p to for batteries (2 VDC, 0 Ah each) 2 (+) (-) (+) (-) 2 2 MAP Expansion Enclosre Kit (ICP MAP020) (+) (-) (+) (-) 2 2 MAP Power Enclosre Kit (ICP MAP0) 2 Batteries (2 VDC, 0 Ah) MAP Panel Enclosre Tamper Switch (ICP MAP000) MAP AC Terminal Block (ICP MAP006) MAP Power Spply 0W (ICP MAP000) Components Located in an Expansion Enclosre The MAP Expansion Enclosre Kit (ICP MAP020) can contain a MAP Power Spply 0W (IPP MAP000) and two 8 Ah batteries Use the expansion enclosre for modle expansion by sing the MAP Hinged Monting Plate (ICP MAP002) monted inside the enclosre Fit the MAP LSN Gateways (ICP MAP000) and the MAP Accessory Monting Plates (ICP MAP0020) on the hinged monting plate When the hinged monting plate is sed, the MAP Power Spply 0W (IPP MAP000) and batteries cannot fit inside the expansion enclosre Power Spply Application Power spplies can be distribted across the premises to where the power is needed to avoid long power cable rns The power spply remains flly spervised on the external BDB 2 MAP AC Terminal Block (ICP MAP006) MAP Expansion Enclosre Tamper Switch (IPP MAP000) Batteries Up to two 2 V, 8 Ah batteries connected in series MAP Power Spply 0W (IPP MAP000) LSN Gateway Application The MAP system spports p to eight LSN gateways The Panel Enclosre Kit (ICP MAP00) spports p to for gateways monted on the MAP Hinged Monting Plate (ICP MAP002); additional gateways can be monted in MAP Expansion Enclosre Kits (ICP MAP020) and connected to the internal or external BDB Each gateway spports one loop configration or two stb configrations MAP Expansion Enclosre Kit (ICP MAP020) 2 MAP Accessory Monting Plate (ICP MAP0020) Up to two can be placed on the pper level of the MAP Hinged Monting Plate MAP 2V Converter (ICP MAP007) Up to two can be placed on a MAP Accessory Monting Plate SIV Fse Plate (one on each MAP Accessory Monting Plate MAP Hinged Monting Plate (ICP MAP002) Field wiring is accessible from the front; internal wiring is easily accessed by swinging the panel open 6 MAP LSN Gateway (ICP MAP000) Up to for optional MAP LSN Gateways fit on the Hinged Monting Plate) 7 One loop configration 8 Two stb configrations Rack Mont Application For specific application reqirements, the MAP Expansion Enclosre Kit (ICP MAP020) fits into a 9 inch monting rack For these reqirements, the expansion enclosre contains: the MAP Hinged Monting Plate (ICP MAP002), the MAP 000 Main Panel (ICP MAP000), the MAP DE Modle (ICP MAP0007), and p to for MAP LSN Gateways (ICP MAP000) The MAP Power Spply 0W (IPP MAP000) is located in a separate enclosre
Modlar Alarm Platform 000 Overview Notice When the MAP Expansion Enclosre Kit (ICP MAP020) is sed in a rack, the batteries cannot be stored in the enclosre Place batteries on a spport shelf which is not part of the MAP 000 portfolio, bt is an optional part of the rack itself Technical specifications Electrical AC Primary Spply Voltage: 00 VAC (-0%) to 20 VAC (+0%) Nmber of Otpts Programmable Otpts on LSN Bs: MAP Main Panel (ICP MAP000): MAP DE Modle (ICP MAP0007): Environmental PINs can inclde p to digits, spporting a 6 digit ser ID and p to a 7 digit passcode Limited to maximm nmber of addresses system wide two power drive; two dry contact; one axiliary power five total: three spervised and two open collector otpts AC Line Freqency: 7 Hz to 6 Hz Operating Temperatre: -0ºC to +ºC (+ºF to +ºF) Power Consmption: Absolte Range of DC Bs: 0 W per power spply (p to 2 power spplies) 9 VDC to 0 VDC; 28 VDC nominal Storage Temperatre: Relative Hmidity: -20ºC to +60ºC (-ºF to +0ºF) % to 9% (non condensing) at the operating and storage temperatres Battery Capacity: Battery Charge Voltage: Up to 80 Ah per power spply (p to 2 power spplies) 28 VDC IP Rating: Environmental Class II IP 0, IK0 EN6090 ; EN00 ; EN0 ; VdS 20 Back p Time: Mechanical Dimensions Panel Enclosre (HxWxD): Expansion Enclosre (HxWxD): System Parameters Nmber of Addresses Addresses: Up to 00 Nmber of Areas Areas: Up to 00 Nmber of Devices MAP LSN Gateways (ICP MAP000): MAP Command Centers (IUI MAP000): MAP Power Spplies 0W (IPP MAP000): DR2020 Printers: Nmber of Inpts Inpts: Determined by battery capacity and system load 60 mm x mm x 9 mm (2 in x 7 in x 7 in) 2 mm x mm x 89 mm (7 in x 7 in x in) Up to 8; each with either loop or 2 stbs Up to 2 Up to 2 Up to eight on-board inpts and one tamper inpt Expands p to 00 addresses Use: Ordering information Intended for indoor se MAP 000 Main Panel Provides wiring terminals for tamper and power spply inpts; eight spervised inpts; Form C relay and axiliary power otpts; switched voltage otpts; two Bosch Data Bs ports, and an Ethernet port Order nmber ICP-MAP000-2 MAP Control Center Graphical color toch screen with adjstable backlight; bilt in speaker with adjstable volme; ser-selectable German and English langages Order nmber IUI-MAP000-2 MAP LSN Gateway Spports p to 27 LSN devices Up to eight gateways can be spported by a Modlar Alarm Platform 000 system Order nmber ICP-MAP000 MAP DE Modle Provides two RS 22 COM ports; three polarity reversing spervised programmable otpts for sirens, strobes, and other adiovisal devices; two nspervised programmable open collector otpts, and seven dedicated otpts for commnicator Order nmber ICP-MAP0007-2 MAP Power Spply 0W Power spply and battery charger nit; converts p to 20 VAC inpt into 2 VDC and 28 VDC otpt Order nmber IPP-MAP000-2 Nmber of Users PINs: 000
6 Modlar Alarm Platform 000 Overview MAP 2V Converter Spports power reqirements for 2 V peripherals and commnicator interfaces inclding varios AT 2000 Transmission System models Order nmber ICP-MAP007 Accessories MAP AT2000 Serial Cable Connection point between the MAP DE Modle and the AT 2000 Analog Transmitter Order nmber ICP-MAP02 MAP Panel Enclosre Kit Kit contains one MAP Panel Enclosre, one MAP Hinged Monting Plate, one MAP Panel Enclosre Tamper Switch, one MAP Enclosre Lockset, and one MAP AC Terminal Block Order nmber ICP-MAP00 MAP Panel Enclosre Tamper Switch Fits in the MAP Panel and MAP Power Enclosres Order nmber ICP-MAP000 MAP Expansion Enclosre Kit Contains one MAP Expansion Enclosre, one MAP Expansion Enclosre Tamper Switch, one MAP Enclosre Lockset, and one MAP AC Terminal Block Order nmber ICP-MAP020 MAP AC Terminal Block Connection point between facility power and MAP Power Spply 0W Order nmber ICP-MAP006 MAP Spare Cable Kit Kit containing cables and parts sed for making electrical connections to MAP devices Order nmber ICP-MAP0090 MAP Spare Terminal Block Kit An assortment of terminal blocks for the varios MAP devices Order nmber ICP-MAP000 DR 2020 T, Tabletop version inclding connection components to BE 2020 Order nmber MAP Printer Cable m (98 ft), 8 condctor gray PVC sheathed cable provides connection point between the MAP DE Modle and a DR2020 Printer Order nmber ICP-MAP00 MAP Expansion Enclosre Tamper Switch Fits in the MAP Expansion Enclosre Order nmber ICP-MAP00 MAP Power Enclosre Kit Kit contains one MAP Power Enclosre, one MAP Panel Enclosre Tamper Switch, one MAP Enclosre Lockset, one MAP AC Terminal Block, and an accessory pack containing connection cables Order nmber ICP-MAP0 MAP Hinged Monting Plate Fits inside the MAP Panel Enclosre or the MAP Expansion Enclosre and holds p to six system modles Order nmber ICP-MAP002 MAP Accessory Monting Plate Monts p to two MAP 2V Converters and one SIV Fse Plate, or an AT 2000 modle Order nmber ICP-MAP0020 MAP Rack Monting Kit Brackets and fasteners for preparing the MAP Expansion Enclosre for rack monting Fasteners for monting to rack not inclded Order nmber ICP-MAP00 MAP Enclosre Lockset Lock, two keys, and two warranty seals for se on MAP Panel Enclosre, MAP Power Enclosre, or MAP Expansion Enclosre Order nmber ICP-MAP0060
7 Modlar Alarm Platform 000 Overview Represented by: Americas: Erope, Middle East, Africa: Asia-Pacific: China: America Latina: Bosch Secrity Systems, Inc Bosch Secrity Systems BV Robert Bosch (SEA) Pte Ltd, Secrity Bosch (Shanghai) Secrity Systems Ltd Robert Bosch Ltda Secrity Systems Division 0 Perinton Parkway Fairport, New York, 0, USA Phone: + 800 289 0096 Fax: + 8 22 980 secritysales@sboschcom wwwboschsecritys PO Box 80002 67 BA Eindhoven, The Netherlands Phone: + 0 277 28 Fax: + 0 277 0 emeasecritysystems@boschcom wwwboschsecritycom Systems Bishan Street 2 Singapore 79 Phone: +6 67 2808 Fax: +6 67 2699 aprsecritysystems@boschcom wwwboschsecrityasia 20 Bilding, No Fqan Road North IBP Changning District, Shanghai 200 China Phone +86 2 228 Fax: +86 2 228298 wwwboschsecritycomcn Via Anhangera, Km 98 CEP 06-900 Campinas, Sao Palo, Brazil Phone: + 9 20 2860 Fax: + 9 20 2862 alsecritysystems@boschcom wwwboschsecritycom Bosch Secrity Systems 202 Data sbject to change withot notice 27629 en, V, 29 Nov 202