647 tali с -^J^J,,»,(jij. / ЯШ IЛ fl-jh Ф Hi Л ШШ шш \4M ЧВ W^ _K_- «
ECO Breaking Down & Finishing for Wire or Strip DOUBLE Breaking Down & Finishing for Wire and Strip Single head bench mounted motorised unit providing an economic and precise solution for either Wire or Strip production. This machine provides an entry level to the motorised range and is an ideal solution for workshops, requiring small production volumes as either reduction or finishing. Cast Iron frames support a system of manual geared roller positioning coupled to special high wear resistant bronze supports. Bench mounted motorised mill providing a precise and economic solution for both Wire and Strip production. This machine provides an ideal solution for small volume workshops, providing flexibility for either reduction or finishing of both Wire and Strip forms, without any form of machine :hange-over. Constructed on an Aluminium base with Cast Iron support frames using a system of manual geared roller positioning coupled to spscial high wear resistant bronze supports. в; в. max 6. n, 7 l. m/min.. ^ВиПТн^ Lamination Tolerances. ^ВмТГ Lamination Tolerances. Wire & Strip / Wire & Strip Double Strip Double Wire Supply II Strip only Wire only Supply Wire & Strip with (OVC) V/6Hz M6 / Wire & Strip with (OVC) V/6Hz M6 Double Strip with (OVC) 4 V / Hz M Strip only with (OVC) 6 V/Hz M Double Wire with (OVC) Three Phase 8V / Hz T4 Wire only with (OVC) 7 Three Phase 8V/Hz T4 HAND OPERATED ROLLING MILLS Complete Range of both Dedicated and Combination Hand Rolling Machines for wire and strip Range of Hand Laminating machines, providing the most flexible and versatile range of equipment available, offering numerous choices of rolling forms and sizes, with features such as fast roller change over, gearbox reduction and a series of modular mounting columns. Ideal for use in all environments from research and educational, to small scale production and specialised craftsmen, and is available as pre mounted twin head units for medium scale production requirements. Duplex Production Machines OAM's purpose rr ade "Duplex" support is availa )le to mount dual hand lamin ators. Stani/ide separate dard versions pro heads for both S :rip and Wire production. Supr lied as either or nm working formats, with red jction system for strip productic n. 8,,
М Mill for Breaking Down & Finishing for Wire and Strip FILLY 4/6 Breaking Down & Finishing for Wire and Strip The M rolling mill is ideally placed as an introduction to the extensive range of free standing machines, and provides a highly flexible solution for both breaking down or finishing of Wire and Strip forms. Developed specifically to cater medium scale production workshops, the M contains an integrated self lubrication system automatically maintaining a permanent circulation of oil through the machine. The Filly 4/6 is a highly flexible machine, configurable for both wire and strip production, with a choice of 4 and 6 working tables. Wire and Strip Combination machines are available with both 4 and 6 working tables, for both heads. All Strip Machine Supplied with a 6 table for breaking down, with Mirror Finished Cylinders fitted as standard to a 4 table for finishing. All Wire Machine, available only in a 6 working table format, with a single wire coiling unit provided as standard. & С f- o- o- max 6.,. 7 l. m/min 8 wire 4 max 86 strip, min 4 IF: 6 LF: 6 LF: 8.8-4. & 8.6 9.- m/min 9.- MILL. 4 & 6 4 Wire & Strip Double Strip Double Wire Wire & Strip with (OVC) Double Strip with (OVC) Double Wire with (OVC) 4 Lamination Tolerances. Supply V/6Hz M6 V / Hz M Three Phase 8V / Hz T4 Wire & Strip, 4 heads 4 Wire & Strip, 6 heads 6 Double Strip Heads (6 e 4) 6 Double Wire Heads (6 ) 6 Wire and Strip, 4 heads with OVC 44 Wire and Strip, 6 heads with OVC 64 Double Strip Heads(6 e 4)with OVC 6 Lamination Tolerances. V/6Hz M6 V / Hz M Three Phase 8V / Hz T4 Hand Laminator LM XXX Working Form Roulettes XX Accessories Purpose made mounting columns are available for each of the Hand Laminators series, with an optional base plate providing for free standing with increased robustness. 8 series series series 8 No Options П Working Cylinder Form Standard "Mejora" Roulettes fitted. (Wire only, or Strip & Wire Combi units) Gearbox Reduction Fitted. Working Cylinder Form Strip Only Wire Only Wire & Strip Combi Wire & Strip Wire "London" format "USA" format 4 "Mejora" Roulettes & Gearbox reduction ( series Only)
ОМ ЖЦ»Щ ^ШиШР 4 MIMMKHJU i ТАК * Via Delle Roved ine, 899 Robbiate (LC) - Italia Tel. +9 9/9.8. Fax +9 9/9.8.4 www.oamitalia.com mail to: oam@oamitalia.com ORIGINAL ЙНД PRODUCT Optional OVC, Providing precision Speed Control All motonsed rolling mills are available with OAM's optional OVC providing precision velocity control for applications requiring the highest levels of finished product quality
ГУ РосНИИИТ и АП Ассоциация МВТК Федеральный информационный фонд отечественных и иностранных каталогов на промышленную продукцию Каталог был представлен на выставке «Ювелир - 6» Каталог включен в базу данных «Федерального информационного фонда отечественных и иностранных каталогов на промышленную продукцию» Россия,679, Москва, Измайловское шоссе, 44, Тел./факс (9)66-,66-78, 6-44. e-mail:; fkatalog(a)mail.ru, www.ffpk.ru Электронная копия издания изготовлена с целью её включения в базы данных Федерального информационного фонда отечественных и иностранных каталогов на промышленную продукцию, которые формируются в соответствии с Постановлением Правительства РФ от 4 июля 997 г. 9 и Постановлением Правительства РФ от декабря 999 г. 7-р и зарегистрированы Комитетом по политике информатизации при Президенте РФ под 9-. 6 год