Electronic Scraper and accessories
|
|
|
- Karin Cook
- 9 years ago
- Views:
Transcription
1 Electronic Scraper and accessories
2 przedstawicielstwo firm : w Polsce : Biuro Handlowe: Warszawa ul. Długa 23/25 II piętro, pok. 210 tel.: fax: kom.: [email protected] Siedziba główna Warszawa ul. Bonifraterska 17, Bud. North Gate, 22 p.
3 Suary Type BS 40 BIAX Universal Scraper, heavyduty model particularly suitable for: 230 V V Type BL 40 BIAX Universal Scraper, light model particularly suitable for: 230 V V Accessories at the BS 40 incl. at the BL grab handle
4 Type BL 10 BIAX Universal Scraper, light model particularly suitable for: 230 V V ype HM 10 AX Halfmoon Pattern Scraper articularly suitable for: 230 V V
5 Type DL 40 Accessories (not incl.) Scraping Scraping interrupted surfaces Scraping dovetails and prisms 4
6 Scraping The scraping tool Operation of the scraper The scraper guarantees precision workmanship. Please note the following instructions: Electronic adjustment (only for electronic models) Stroke adjustment 5
7 Operation Scraping 1 st Step: Prescraping 2 nd Step: Plane scraping 3 rd Step: Finish scraping Precision scraping, resp. oiltight scraping 6
8 Applications Recoended value All about scraping Machine scraping or manual scraping? 7
9 Recoended value for applications Plastics Heavy metal Cast iron PVC 8 In special cases. We will advise on the selection of the correct scraper blade.
10 Scraping vertical surfaces Mounting machine tools Operation scraping Influence of different blade radius and tilt angles on the scrapping result Scraping of Half moon patterns 9
11 Applications Scraping How to scrap gray cast iron? How to scrap wax castin? How to scrap steel with a high resistance of more than 700N/²? 2 How to scrap cast steel? How to scrap nonferrous metals? How to scrap brass and red bronze? How to scrap aluminium? How to scrap bronze? How to scrap white metal? 10
12 Assortment No Assortment No Assortment No Assortment No Assortment No
13 Scraper blades BIAXScraper inserts Function Type Dimensions (L xw): Cutter radius: Cutting angle: 20 / x20 3,5 25 / x ,5 25 / x ,5 25 / x ,5 25 / x ,5 25 / x ,5 Funktion Type Dimensions (L xw): Cutter radius: Cutting angle: x /30 ST x /40 ST x BIAXClamp holder for scraper inserts Funktion Type Dimensions (L xw): KL x23 KL x23 KL 130 V x23 KL x24 12
14 Scraper blades BIAXCarbidetipped blades 90 Function dovetail guides Standard blades Standard blades Prescraping Prescraping for narrow guides for narrow guides prescraping Type Cutter radius: Cutter radius: Dimensions (W x B) Cutting angle: 10/ x10 3,5 15 / x15 3,5 20 / x20 3,5 25 / x 25 3,5 30 / x 30 3,5 BIAXCarbidetipped e blades 150 Function 90 turned blades on enquiry Type Cutter radius: Cutter radius: Dimensions (L xw) : Cutting angle: 10/ x10 3,5 15 / x15 3,5 20 / x20 3,5 25 / x 25 3,5 30 / x 30 3,5 20 /150 ST x
15 Clamp holder and scraper inserts for pattern scraping BIAXScraper inserts for scraper type HM 10 Function Carbidetipped Standard type robust design, for pattern scraping Type Dimensions (L xw): Cutter radius: Cutter angle: Pattern size: R x 23 3,5 small R x ,5 standard R x ,5 large R x ,5 extra large BIAXClamp holder Funktion for scraping blade inserts Type KL Dimensions (L xw): 75 x 20 BIAXHalfmoon pattern scraper blades HM10 Function Carbidetipped Deep oil pockets guarantee the continuous flow of oil without rupturing of the oil film 14 Type Dimensions (L xw) : Cutter radius: Pattern size: R / x 20 small R 90/ x standard R 120/ x large R 150/ x extra large
16 BIAXScraper accessories Hand scraper for the use of BIAXScraper blades Dimensions: Länge 400 BIAXScraper accessories Hand scraper for the use of BIAXScraper blades Dimensions: Länge 445 BIAXScraper accessories Tuschierfarbe zum Einfärben von Tuschierwerkzeugen Order number / blue Order number / red BIAXScraper accessories Roller for applying engineers blue on master plates jigs Order number molton ø x width 35 x 120 Order number rubber ø x width 50 x 150 BIAXScraper blade grinding and lapping machine SKM 80 This machine is used to grind and lap carbidetipped scraper blades, changing inserts, turning tools, reversible inserts, etc. Technical Data Table swivelling by 200 x 110 swivelling by +/ 15 Dimensions: 450 x 250 Weight: 35 kg Motor: 230/400 V 50 Hz 2700 min W Enclosed accessories Diamond wheel: Ø 80 x 10 Korn D Abrasive: 0,5 Liter Sharpening stone for diamond wheel:
LarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves
LarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves As a rule, control and reduction valves of the globe type have an integrated plug that narrowly
Cleaning of floor coverings. Vacuum Cleaners Brush-Type Vacuum Cleaners Spray Extractors Single Disc Machines Cleaning Machines - Cleanser
Cleaning of floor coverings Vacuum Cleaners Brush-Type Vacuum Cleaners Spray Extractors Single Disc Machines Cleaning Machines - Cleanser 135 7 Cleaning of floor coverings Vacuum Cleaners for Everyday
The Bonelle Tool and Cutter Grinder
The Bonelle Tool and Cutter Grinder The grinder was constructed about 1987 and exhibited at the 89th Model Engineering exhibition where it was awarded a bronze medal (see ME Vol164 No 3868 page 273). Subsequently
BAGGAGE HANDLING SYSTEMS. Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 -
BAGGAGE HANDLING SYSTEMS Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 - TECHNICAL SPECIFICS INDEX Check-in with one conveyor 4 Scales 6 Belt Conveyors 8 Take away 9 Feeder and Belt
Atling proudly presents the next generation self centering steady rests ATLING. Ockelbo Sweden. AX Steady Rests
Atling proudly presents the next generation self centering steady rests ATLING Ockelbo Sweden AX Steady Rests 1 The New AX Steady Rest The Atling AX series is the result of several years of development
14. Tools and Software
14. Tools and Software System overview: Geberit welding machine MEDIA 160 and tools... 364 System overview: Geberit welding machine UNIVERSAL 315 and tools... 365 14.1 Tools for Geberit Silent-db20 / Geberit
Lapping and Polishing Basics
Lapping and Polishing Basics Applications Laboratory Report 54 Lapping and Polishing 1.0: Introduction Lapping and polishing is a process by which material is precisely removed from a workpiece (or specimen)
Precise heavy-duty cutting
PR 130 / PR 150 / PR 160 / PR 180 / PR 200 / PR 260 Precise heavy-duty cutting P-SERIES K-SERIES T-SERIES MILLFORCE 02 / Fields of application 03 / Machine concept 04 / Machine technology 05 / Options
Pipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre
Consumables Accessories
Consumables Accessories Index Lapping / Polishing Lapping plates / Polishing plates / Supporting plates.... 3 Dressing rings... 4 Pressure plates 4 Ceramic pellets. 4 Rubber pads..... 5 Felt pads.... 5
New in the PFERD Product Line 204
COMBICLICK Fibre Discs COMBICLICK fibre discs Silicon carbide SiC D The silicon carbide SiC type is suitable for working on aluminium, copper, bronze, titanium, high-alloy steels and fibre reinforced plastics.
ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
Pad printing accessories
Pad printing accessories Accessories for inks & ink cups Screened films & plastic plate manufacturing Cleaning Miscellaneous Inhalt Summary Page Adhesive spray KIWO FIX 12 All-purpose gloves 9 All-purpose
Product catalogue, pipe and sewer cleaning systems
Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes
Manual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
PaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
TechCut 4 Precision Low Speed Saw
Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction
The Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
WERKZEUGMASCHINEN BENDING TOOLS
WRKZUGMASCHINN BNDING TOOLS Press Brakes HT Werkzeugmaschinen GmbH mmendinger Str. 21 D-79331 Teningen Germany Tel. + 49 (0) 76 41 46 09-0 Fax + 49 (0) 76 41 46 09-290 email: [email protected] Internet: www.eht.de
EWE Ball Valve-Type Tapping Valve. EWE Ball-Type Tapping Valve. EWE GBM Tapping Valves. for water and gas
The following overview shows the different EWE tapping valves to help you to make your choice: EWE valve tapping valve for vertical tapping with operating shut-off, for all types of pipe, with external
PLATFORM STEPLADDERS & TEMPORARY WORK PLATFORMS
STEPLADDERS & TEMPORARY WORK S AUSTRALIA S #1 LADDER BRAND BAILEYLADDERS.COM.AU EW N The Bailey P170 is the latest innovation from Australia s #1 ladder brand... More than just a platform stepladder, the
The ACCU-LUBE Micro-Lubricating System for external and internal lubrication
E -000 Information on our company The ACCU-LUBE Micro-Lubricating System for external and internal lubrication the environmentally safe Micro-Lubricating System eliminating waste disposal Development:
DRUM ROLLER. FAR-1, Article No. B69-6300-A DRUM CART FOR 200 LITER STEEL DRUMS. Model FK 1029-1 FK 1029-3 FK 1029-2 FK 1029-4
DRUM ROLLER Suitable for drums up to 200 liter capacity Made from fire-galvanized sheet steel ø 610 mm, with 4 polyamide swiveling castors ø 75 mm Model FAR-1: closed version with welded leak-proof base,
The CLIPPER Solutions
The CLIPPER Solutions 83 TILE SAWS TT180 BM 550W Ø 180mm 8 11kg A small and lightweight table top tile saw easily transportable with its protecting case. Easy transportation and storage Removable plastic
Advantages and application of PCD and CBn tools
PCD and CBN tools Advantages and application of PCD and CBn tools Powerful and economical Tools with PCD and CBN cutting edges are the ideal solution for difficult-to machine, highly abrasive materials.
Fixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS
18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS SKATES LIFTING TABLES HAND TROLLEYS PLATFORM HAND TRUCKS SKATES SKATE 1500KG for moving machines and equipment duration oiled metal wheels
INTRODUCTION UNDERSTANDING THE PRODUCT ABRASIVE TYPES
INTRODUCTION From standard aluminum oxide bench wheels to premium ceramic abrasive surface grinding wheels, Norton offers high performance abrasive solutions that can maximise productivity in virtually
172 Holesaws Overview Bosch Accessories for Power Tools 09/10. 189 Diamond holesaw. with Power-Change adapter. 190 Diamond drill bits
Holesaw 172 Holesaws Overview Bosch Accessories for Power Tools 09/10 Overview 178 Progressor holesaw 189 Diamond holesaw 196 Hole cutters 183 Sheet Metal holesaw 190 Diamond drill bits 186 Multi Construction
Stock List: >>Offset- Printing Machines
>>Offset- Printing Machines Heidelberg GTO-52+ - Single- colour sheet offset printing machine, - Printing format 36 cm x 52 cm, - Manufacturing year 1985, - Plus- Version, - 14 Mio. prints, - Conventional
Worldwide network in over 40 countries.
Worldwide network in over 40 countries. April 2012 56 rue de Neuilly 93136 Noisy le Sec Cedex - France Tel : +33 (0)1 49 42 72 95 Fax : +33 (0)1 48 44 00 02 E-mail : [email protected] PTC s vibrodrivers
Espresso coffee grinder
Espresso coffee grinder 40A Espresso grinder 40A (Grey model) Internationally patented models L o n g l i f e, d e s i g n a n d s i l e n c e Silent espresso Fresh ground coffee gives the best espresso
MODEL T10023 ACCESSORY KIT #1 FOR T10010/T10097 WET GRINDER
MODEL T0023 ACCESSORY KIT # FOR T000/T0097 WET GRINDER INSTRUCTION SHEET Introduction The Model T0023 Accessory Kit # for the Model T000/T0097 Wet Grinder includes fixtures for sharpening small knives,
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 [email protected]. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
Industrial magnetic products and tools
Industrial magnetic products and tools M Products and tools for industrial applications akker Magnetics, established in 1971, is a leading producer of magnetic products and industrial systems based on
SHOP NOTES METAL SHAPER FOR YOUR SHOP
SHOP NOTES METAL SHAPER FOR YOUR SHOP A METAL SHAPER is indispensable for certain machining operations where flat surfaces must be produced within very close limits, such as machining flats on castings,
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
FIBREGLASS LADDERS THE LADDER WITH THE BLUE TRIM
SUPERLITE STEP-LADDER WITH ALUMINIUM TREADS 1 700 700-06 SOLID TRIANGULAR BOTTOM GUSSET PINCH RESISTANT SPREADER BARS Ref. Bar Code No. of steps Weight 700-06 6005413007015 6 8.3kg 700-08 6005413007022
Bringing good things ahead
Bringing good things ahead Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from
3D Printing for Industry Today: Fact or Fiction?
3D Printing for Industry Today: Fact or Fiction? March 2015 Presentation for Additive World Conference, Eindhoven, NL Part 1: Challenge Part 2: Approach Part 3: Examples Part 4: Conclusions Main question
HAND TOOLS FOR PLASTIC STRAPPING
HAND TOOLS FOR PLASTIC STRAPPING ORGAPACK solutions Hand tools for different applications Umreifungsband Plastic strap Packstücke Packages Leicht Light Medium-duty Mittelschwer Schwer Heavy With friction-weld
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Needle shut-off with integrated 2-way actuator
NOT SEARCHING, BUT FINDING
NOT SEARCHING, BUT FINDING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide
LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
HONING LATHE DUPLICATOR CUTTERS
Lay the flat face of the cutter or bit on the flat top surface of the hone with the rest of the cutter overhanging the edge. Rub the cutter or bit up and down the hone (Figure 24-44). Be sure to hold the
Lathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
Nightspot A2 Floodlights for LEDs and high pressure discharge lamps
Nightspot A2 Nightspot A2 Floodlights for LEDs and high pressure discharge lamps Nightspot floodlights are available with rotationally symmetrical reflectors in different sizes for metal halide lamps and
GEOMETRY OF SINGLE POINT TURNING TOOLS
GEOMETRY OF SINGLE POINT TURNING TOOLS LEARNING OBJECTIVES Introduction to Features of single point cutting tool. Concept of rake and clearance angle and its importance System of description of Tool geometry
PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
Machine tools. Milling- and boring machines
Milling- and boring machines Milling- and boring machines Our family owned company develops and manufactures customized machines and designs machine tools based on work piece requirements successfully
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
How To Make A Spiral Fluted And Wire Wrapped Dagger Handle
Making A Spiral Fluted and Wire Wrapped Dagger Handle By: Steve Culver, MS Part 1 Making A Spiral Fluted and Wire Wrapped Dagger Handle By: Steve Culver, MS After the rough handle material is drilled through
CONTROL EVOLUTION STANDARD COMPACT. Versatile in use. Perfect sawing and grooving with Striebig.
CONTROL EVOLUTION TANDARD COMPACT COMPOITE PANEL Versatile in use. Perfect sawing and grooving with triebig. Creating ustainable Values Confidence, ability, continuity We are committed to vertical panel
Ruční páskovače PRO PLASTOVÉ PÁSKY
Ruční páskovače PRO PLASTOVÉ PÁSKY New battery-powered hand tools ORGAPACK OR-T 200 + OR-T 100 The new generation of battery-powered hand tools: Strapping has never been so easy! ORGAPACK OR-T 200 For
MSS Monobloc holders for parting and grooving
MSS Monobloc holders for parting and grooving Easy, profitable and convincing 2 Monobloc tool holder, system GX, for inserts with two cutting edges, size GX24. Inexpensive solution for radial grooving,
compressed air conditioning accessories. one stop shop process reliable efficient economical high degree of reusability
Screwdriving technology Automation Air motors Air tools compressed air conditioning and accessories one stop shop process reliable efficient economical high degree of reusability DEPRAG offers a comprehensive
ROUNDO 3-Roll Plate Bending Machines Type PS
ROUNDO 3-Roll Plate Bending Machines Type PS Universal Machine used for all Plate Bending Double Pinch Design 1. Align the plate using the alignment grooves in the lower rolls or against the rear roll.
Grinding machines for the professional knife maker
Grinding machines for the professional knife maker Distributor for The Netherlands, Belgium, Luxemburg, UK, Germany and France: Introduction Goset is a very versitile company, specialized in machinebuilding,
work-piece guided processing system ROBOCELL 100 ROBOCELL 100 new processing options system safety modular construction
1.10 The work-piece guided processing system ROBOCELL 100 is a highly modular system solution provided by the house of CIMOTEC. The ROBOCELL 100 offers decisive benefits starting from small and simple
1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2
TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION
U-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42) R215.64. Long edge cutter 215.3 0.17 (0.10-0.20) R215.3 -AAH 0.12 (0.08-0.
General Turning PROFILING Feed recommendations Feed per tooth, fz (mm/tooth) Insert geometry Insert size Starting value (min.- max.) U-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42)
413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
Guideline Laser Series
Guideline Laser Series Highly visible alignment laser for visually demanding surfaces Red / Green long visible lines Equal brightness across length of the line Uniform Line (no fading at ends of the line)
Accessories for GF and RA machines
Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling
Thickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
How To Test A Rockwell Type Hardness Tester
ROCKWELL TYPE HARDNESS TESTER CV-600A TM Ready-to-test analogue Rockwell type tester with lever system for direct load application Basic regular Rockwell type tester offering accuracy, reliability and
Resharpening Companion
Resharpening Companion 10950 Correct Angles, Pictures, and Step-By-Step Instructions The Resharpening Companion is meant to be a guide and quick reference to help you resharpen. It is not meant to replace
Group. The precision company SURFACE TECHNOLOGIES INTERNATIONAL. Hard chrome. Surface solutions by STI Group. English
Group SURFACE TECHNOLOGIES INTERNATIONAL The precision company Hard chrome English Surface solutions by STI Group Trust the Market Leader Thanks to its technological competence, its modern infrastructure,
Sense it! Connect it! Bus it! Solve it! EncoderS
Sense it! Connect it! Bus it! Solve it! EncoderS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
Lighting Performance for Quads and ATVs
Lighting Performance for Quads and ATVs Ideas today for the cars of tomorrow Premium Headlight Modules Compact flush-mounted headlight with 50 mm light aperture. Use of high-quality modern metal materials.
TRIMMING UNIT/DIAMOND MACHINE TST.13
TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
Speed-Mat Rectangle Cutter
Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.
Talon Self Propelled. Model: AM3051SP Engine: Surefire 4 Stroke Cutting Width: 480mm (19 ) Cutting Height: 12 Position Weight: 38kg
Model: AM3051SP Engine: Surefire 4 Stroke Cutting Width: 480mm (19 ) Cutting Height: 12 Position Weight: 38kg Talon Self Propelled Featuring the new Talon Surefire four stroke engine, self propelled rear
Morgue refrigeration unit
Morgue refrigeration unit The Morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site
Designed in Italy by EN 14-1
Designed in Italy by EN 14-1 The new range of Work Line tool bags is designed in Italy by GT Line and made exclusively for professionals looking for the most reliable companion to their heavy duty daily
ENERGY HYDRO POWER SOLUTIONS FOR ELECTRICAL POWER TRANSFER ELECTRICAL PROTECTION SEALING
ENERGY HYDRO POWER SOLUTIONS FOR ELECTRICAL POWER TRANSFER ELECTRICAL PROTECTION SEALING MERSEN A world leader committed to Renewable Energies A world leading supplier of electrical protection, sealing,
DUGARD. DUGARD Machine. Dugard Heavy Duty Vertical Machining Centres. Machine Tools That Create Solutions Since 1939. Tools
DUGARD Machine Tools That Create Solutions Since 1939 Dugard Heavy Duty Vertical Machining Centres DUGARD Machine Tools www.dugard.com [email protected] 01273 732286 The unique inverted slideway design
Superlight Compact Nano
Willy Meyer+Sohn GmbH+Co. KG Stemmessiepener Weg 5 D-58675 Hemer Telephone: +49 (0) 23 72/98 91-0 Telefax: +49 (0) 23 72/98 91-48 E-mail: [email protected] www.meyer-lighting.com 258 00 530-1211
Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge...
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge... Pivot
Flash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
Tube Type Oil Skimmer Comparison
Process Overview- Tube Type Oil Skimmers Oil flows down the face of the skimmer and into a sludge pan that is plumbed to a barrel. Model BG01 & BG34 or 6V Oil Skimmer 1.0 or 3/4 Diameter Collector Tube
Transformer oil cooler ALFA A02
A02 Transformer oil cooler ALFA Transformer oil cooler ALFA The transformer oil cooler ALFA is used to cool power transformers by means of forced air and oil flow. The oil in the cooler is circulated using
External Hones and Accessories
External s and Accessories O.D. Range: mm 5 mm.0".500" Honing Tools for Finishing External Diameters For low production tool room salvage maintenance. Recommended for almost any material, including hardened
Operating instructions. SCORP 220 Plus SCORP 360. Pipe Cutter. Code 790 014 762 Machine-no.:
precision. power. simplicity. Operating instructions Pipe Cutter SCORP 220 Plus SCORP 360 Code 790 014 762 Machine-no.: All rights reserved, in particular the rights of duplication and distribution as
mechanics PP-Profiles Panel Profiles PT-Profiles T-Groove Plates RE-Profiles Rectangular Profiles PU-Profiles Universal Profiles
Overview PP-Profiles Panel Profiles PP 50 PP 100 PP 150 PP 200 PP 0 B 4 PT-Profiles T-Groove Plates B 5 PT PT 50 RE-Profiles Rectangular Profiles B 6 RE 15 RE 30 RE40 RE65 PU-Profiles Universal Profiles
NEW. VIRIO tool The professional solution for heavy-duty tools Balancing of tools and tool holders up to 100 kg. RM 1063e
NEW VIRIO tool The professional solution for heavy-duty tools Balancing of tools and tool holders up to 100 kg RM 1063e Virio tool Optimum balancing for heavy-duty tools When machining large-scale components
Contact-Systems and Accessories for Anodising and Electroplating Equipment
Contact-Systems and Accessories for Anodising and Electroplating Equipment 2000 Table of Contents Description Page High Current Contacts and Accessories for Rack Systems Contact Saddles Standard 250-3000
Alfra Rotabest 100 Metal Core Drilling Machine. Operation Manual
Alfra Rotabest 100 Metal Core Drilling Machine Operation Manual 06/2005 1. Technical Data Prod. No.: 18630 Name : Rotabest 100 Input: Load rpm: 1800 Watt 110/175/245/385 rpm Tool Holder : MT 3 Coolant
Making Clock Wheel & Pinion Cutters
Making Clock Wheel & Pinion Cutters When making hand made clocks or in repair work an odd size cutter is sometimes needed. Sometimes just one pinion is required and does not justify the cost of a commercial
Profile rail guides LLR
Profile rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
CHAPTER 82. Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal
NOTES : CHAPTER 82 Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal 1. Apart from blow lamps, portable forges, grinding wheels with frameworks, manicure or pedicure
Fredriksons conveyor systems handle goods with a width from 20 mm up to 600 mm.
Conveyor Solutions Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from one
Cross-beam scanning system to detect slim objects. 100 mm 3.937 in
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
Permanent Magnetic Generator Construction Manual
Permanent Magnetic Generator Construction Manual http://hojomotor.com Our Team Doing an On-site Assembly in Peru http://hojomotor.com Section 1) Introduction This manual describes how to build a 'permanent
Cutting and stripping tools
Cutting and stripping tools Introduction 2 Cutting and stripping tool 0.02-10 mm² (16 mm²) 3 Stripping tool for cables Ø 2.5-40 mm 4 Tools for cutting and stripping of conductors 0.5-6 mm² and for cutting