Asheridge echobox EOC-02 Wi-Fi Setup and applications guide Install and applications guide Contents 1. What s in the box 2. Connectivity 3. Setup options 4. Wi-Fi configuration and setup 5. Use with other devices 6. Troubleshooting 7. Typical install scenarios 8. Further assistance 9. (Notes, cautions and all the stuff you never actually read)
What s in the box? 1 x echobox EOC-02 Wi-Fi adapter 2 x Wi-Fi aerials 1 x PSU 1 x UK mains socket adapter 1 x European Mains socket adapter (attached to PSU) 1 x Patch cord 1 x Coax fly lead 1 x F to IEC adapter 1 x Quick start Guide
Basic box overview? Coax connection indicator WPS connect button Master reset Connection indicators Power indicator Wi-Fi aerial Wi-Fi aerial Power ports Loop through to TV or STB (does not carry any signal Coax Connection in
2. Set up options The EOC-02 is a multi-purpose home network device that can efficiently transport Data and HD video around your home using, and Wi-Fi. For Data over coax operation it will need to be used with at least 1 other MoCA compatible device, this can be either. Another echobox EOC-02 Wi-Fi adapter Any other Device that supports the universal MoCA standard (, cable modem etc.)
Typical CATV install Gateway/router Cable TV service
CATV install with additional rooms Gateway/router Cable TV service
CATV system with Multiple devices Main Cable TV Service to all apartments Tap Splitter Gateway/router Bedroom 1 Bedroom 2 NAS Drive Main viewing point
Basic system with DVB-T coax network Standard TV s Router Standard TV s
Whole house system with DVB-T coax network Router
Using Wi-Fi to bridge the link between main router and the Coax network when there is no way of making a direct cable connection between the main router and the 1st echobox Router Wi-Fi connection between Router and MoCA Wi-Fi adapter
EchoBox EOC-02 used as a stand alone Wi-Fi to hub at the main viewing point, to connect devices that have no Wi-Fi connectivity. Also provide a Wi-Fi hotspot at the main viewing pointwi-fi SSID is duplicated to provide hotspot coverage. Router Wi-Fi connection between Router and MoCA Wi-Fi adapter
Then add additional echoboxes to make a whole house network Router Wi-Fi connection between Router and MoCA Wi-Fi adapter
Using 2 x Echo boxes to make a point to point link over a single piece of coax cable Router Coax cable must be connected to the Cable in port of both echoboxes
Setup and Configuration of Wi-Fi functions on the echobox EOC-02 To access the Wi-Fi functions of the echobox EOC-02 you will need to access the setup menu via a web browser on a laptop or tablet device A simple onscreen Wizard will guide you through the connection options and settings
Initial setup Connect the EOC-02 to a spare port on your main router using the RJ45 Patch cord supplied Power up the EOC-02 Open a web browser on a laptop or tablet that Is connected to the same network as the router In the browser enter the default IP address of the EOC-02 192.168.1.155 this can also be found on the underneath of the EOC-02 You will now be asked for a password - The default username and password are user NOTE if there is no connection and you see this screen Refer to the section on our website - IP address setup. The main setup wizard screen will now appear Choose the type of operation and connection you require and then click Next to move on through the Wizard Once the Wizard is complete the EOC-02 will reboot, do not turn it off during this time Once rebooted, you can go and plug in the EOC-02 at its operational location.
IP address setup If you saw the screen below after entering the default IP address into your browser, then your router is not using the same IP range as the EOC-02 See the section on our website How to manually set up an IP address.