Gauges / Pin gauges / Thread and tolerance tables

Gauges / Pin gauges / Thread and tolerance tables C2.00.EN-dealer.200825 20, Schut Geometrische Meettechniek bv 27 Measuring instruments and systems 20/202-D

Limit gauges for internal and external dimensions The manufacturing tolerance and the permissible reduction in wear for plain gauges are laid down in DIN 762. New gauges are supplemented with a wear allowance on the Go end: z (plus) for plug gauges and z (minus) for ring gauges. Accordingly, the size indicated on the handle is not similar to the measured value of the new Go end. Example: plug gauge 0 H9 New Go end: size 0.000 wear allowance (+ z) 0.009 0.009 manufacturing tolerance ± 0.002 largest value measured 0.0 smallest value measured 0.007 The gauges are also available without wear allowance (additional cost). This should be indicated when ordering. Plug gauges Measuring reports For all gauges also measuring reports can be ordered. Inspection report (German) per gauge. Stating of product specifications, measured values after production, used traceable measuring devices, measuring inaccuracy and measuring date. A favourable choice when your quality system does not require traceable (RvA) certificates. Traceable RvA certificate (Dutch) with measuring reports of the ordered gauges. Besides stating of the measured values the extra assurance of an external RvA inspection. Manufactured according DIN 2245, 2246 and 2247. Available from 0.5 to 250 ; up to 70 with Go and NoGo on one handle, over 70 in two parts. s are for H7 plug gauges with Go and NoGo ends in hardened steel. Also available: other fit sizes, like H6 and H8, hard-chrome plated plug gauges, tungsten carbide plug gauges, extended plug gauges, plug gauges with vent hole, plug gauges with easy-entry pilot, flat plug gauges, square and hexagonal plug gauges. Size H7/ Size H7/ Size H7/ Size H7/ 4 4 65.5 5 5 68 2 6 6 70 2.5 7 7 72 8 8 75.5 9 40 78 4 20 42 80 4.5 2 44 82 5 22 45 85 5.5 2 46 88 6 24 47 90 7 25 48 92 8 26 50 95 9 27 52 98 0 28 55 00 0 58 2 2 60 62 Larger sizes available on request C2.202.EN-dealer.200825 20, Schut Geometrische Meettechniek bv 28 Measuring instruments and systems 20/202-D

PIN Pin gauges Swiss made, hardened and ground steel pin gauges; available loose and in sets. Hardened, ground, and seasoned steel. Diameter range: without handle: 0.06-20.00, with handle: 0.06-0.00. Increment: 0.0. Accuracy: ± 0.005. Pin gauges ø 5.00-20.00 without handle: indication on head. Diameter/ Length/ Pin gauge without handle: 0.06-0.09 0 0.0-0.9 40 0.20-0.29 40 0.0-0.49 40 0.50-0.99 40.00-2.99 70.00-4.00 70 4.0-5.00 70 5.0-5.99 70 6.00-9.99 70 0.00 -.99 70 2.00 -.99 70 4.00-5.99 70 6.00-8.99 70 9.00-20.00 70 Pin gauge with handle 2 : 0.06-0.09 2 0.0-0.9 0.20-0.29 0.0-0.49 0.50-0.99.00-2.99 62.00-4.00 62 4.0-5.00 62 5.0-5.99 62 6.00-0.00 62 Delivery in plastic transport case. 2 The length here indicates the measuring length and not the total length of the pin gauges. Item No. Description Wooden case (tubes not included): 8.2 For 50 pin gauges ø 0.0-0.00 without handle 8.704 For 00 pin gauges ø 0.0-0.00 without handle 8.264 For 50 pin gauges ø 0.0-0.00 with handle 8.8 For 40 pin gauges ø 0.0-5.00 8.705 For 80 pin gauges ø 0.0-5.00 8.706 For 0 pin gauges ø 5.0-20.00 Pin gauge tube for pin gauges: 8.066 Without handle up to ø 0.99 88.224 Without handle ø.00-7.00 88.089 With handle up to ø 0.99 84.86 Base inscription per size Also available: With an accuracy of ± 0.000 or ± 0.00 ; hardened steel ø 0.06-20.00, tungsten carbide or ceramics ø 0.50-9.99, with 0.0 increments. The length may deviate. More information available on request. C2.204.EN-dealer.200825 20, Schut Geometrische Meettechniek bv 29 Measuring instruments and systems 20/202-D

PIN Pin gauges in sets Hardened, ground, and seasoned steel. Diameter range: 0.0-0.00. Increment: 0.0. Accuracy: ± 0.005. Without handle. Pin gauges ø 5.00-0.00 : indication on head. Length: ø 0.0-0.99 : 40, ø.00-0.00 : 70. Sets with larger diameters and/or with handle are available on request. Item No. Diameter Increment Number per set 8.90 0.0 -.00 0.0 9 8.902.00-2.00 0.0 0 8.90 2.00 -.00 0.0 0 8.904.00-4.00 0.0 0 8.905 4.00-5.00 0.0 0 8.906 5.00-6.00 0.0 0 8.907 6.00-7.00 0.0 0 8.908 7.00-8.00 0.0 0 8.909 8.00-9.00 0.0 0 8.90 9.00-0.00 0.0 0 84.90.00-0.00 0.0 9 * s per set, in wooden case. * Set pin gauges without handle Individual pin gauges without handle Pin gauges accessories Interchangeable handles For pin gauges without handle. Holders for Go/NoGo determination For two pin gauges without handle. With NoGo indication. Item No. For diameter/ 86.04 0.40-0.80 84.72 0.80 -.0 86.044.0 -.80 86.045.80-2.0 87.65 2.0-2.80 87.956 2.80 -.0 87.957.0 -.80 87.958.80-4.0 87.959 4.0-4.80 87.960 4.80-5.0 Item No. For diameter/ 8.0.00-2.00 8. 2.00-4.00 8.2 4.00-6.00 8. 6.00-8.00 8.4 8.00-0.00 C2.20.EN-dealer.200825 20, Schut Geometrische Meettechniek bv 220 Measuring instruments and systems 20/202-D

PIN Pin gauges Ground and lapped, hardened tool steel pin gauges with a high accuracy. Available per piece and in sets. Swiss made. Diameter range: ø 0.06-0.00. Increment: 0.0. Accuracy: ± 0.0005. Hardened tool steel. Ground and lapped. Measuring length (and total length): ø 0.06-0.0 : 2 (4 ), ø 0. - 0.50 :.5 (5.5 ), ø 0.5 -.50 : 5 (7 ), ø.5-2.00 : 6 (8 ), ø 2.0 -.50 : 8 (4 ), ø.5-6.00 : 0 (55 ), ø 6.0-8.00 : 4 (59 ), ø 8.0-0.00 : 8 (6 ). Size indication on the insulated handle. Per piece Diameter/ 0.06-0.09 0.0-0.9 0.20-0.29 0.0-0.49 0.50-0.99.00-2.99.00-5.99 6.00-0.00 Sets Item No. Diameter Pieces 8.76 0.06-0.50 45 8.762 0.5 -.00 50 8.76.0 -.50 50 8.764.5-2.00 50 8.765 2.0-2.50 50 8.766 2.5 -.00 50 8.767.0 -.50 50 8.768.5-4.00 50 87. 4.0-4.50 50 87.2 4.5-5.00 50 87. 5.0-5.50 50 87.4 5.5-6.00 50 87.5 6.0-6.50 50 87.6 6.5-7.00 50 87.7 7.0-7.50 50 87.8 7.5-8.00 50 87.9 8.0-8.50 50 87.20 8.5-9.00 50 87.2 9.0-9.50 50 87.22 9.5-0.00 50 C2.02.EN-dealer.200825 20, Schut Geometrische Meettechniek bv 22 Measuring instruments and systems 20/202-D

Setting rings Setting rings, manufactured according DIN 2250 form C, to 5. The size is indicated on the ring to three decimal places, to 50 setting rings are also available in tungsten carbide as are form B rings for pneumatic measuring tools. s for intermediate and larger sizes are available on request. Size Size Size Size 8 4 80 65.2 9 44 82 70.5 20 45 84 75.8 2 46 85 80 2 22 47 86 85 2.2 2 48 88 90 2.5 24 49 90 95 2.8 25 50 92 200 26 52 94 20.5 27 54 95 220 4 28 55 96 20 4.5 29 56 98 240 5 0 58 00 250 6 60 05 260 7 2 62 0 270 8 64 5 280 9 4 65 20 290 0 5 66 25 00 6 68 0 0 2 7 70 5 5 8 72 40 4 9 74 45 5 40 75 50 6 4 76 55 7 42 78 60 Size Intermediate sizes over are also available Measuring reports For all gauges also measuring reports can be ordered. Inspection report (German) per gauge. Stating of product specifications, measured values after production, used traceable measuring devices, measuring inaccuracy and measuring date. A favourable choice when your quality system does not require traceable (RvA) certificates. Traceable RvA certificate (Dutch) with measuring reports of the ordered gauges. Besides stating of the measured values the extra assurance of an external RvA inspection. C2.205.EN-dealer.200825 20, Schut Geometrische Meettechniek bv 222 Measuring instruments and systems 20/202-D

Taper gauges To increase the already large capacity to transmit moments, some taper gauges are furnished with a lip which functions as catch lock. 82.560 82.59 Morse taper gauges Morse 82.540 Plug: Ring: Plug: Ring: 0 82.5 82.52 82.552 82.55 82.5 82.54 82.554 82.555 2 82.55 82.56 82.556 82.557 82.57 82.58 82.558 82.559 4 82.59 82.540 82.560 82.56 5 82.54 82.542 82.562 82.56 6 82.54 82.544 82.564 82.565 Metric taper gauges metric Without lip, DIN 229 Item No. Item No. Without lip, DIN 24 Item No. Item No. Plug: Ring: Plug: Ring: 4 804.00 804.0 6 804.002 804.02 80 804.00 804.0 804.02 804.0 00 804.004 804.04 804.022 804.02 20 804.005 804.05 804.02 804.0 82.56 With lip, DIN 20 Item No. Item No. With lip, DIN 25 Item No. Item No. Short taper gauges SK Plug, DIN 2079 Item No. Ring, DIN 2080 Item No. 0 82.568 82.569 40 82.570 82.57 50 82.572 82.57 60 82.574 82.575 82.568 82.57 C2.206.EN-dealer.200825 20, Schut Geometrische Meettechniek bv 22 Measuring instruments and systems 20/202-D

Measuring mandrels The cylinders are hollow and have four marks on the cylinder wall near the thread and numbered marks in successive distances of 90 on the face. The cylinder and the front face are ground and lapped. The hardness is (60 ± 2) HRc. Measuring mandrels with internal thread, without external screw thread and nut Item No. Cone Dimensions cylinder ø/ length/ 82.59 Sc 20 24 50 82.592 Sc 0 2 200 82.59 Sc 0 2 00 82.594 Sc 40 40 00 82.595 Sc 45 40 00 82.596 Sc 50 40 00 82.597 Sc 50 6 500 Specifications of the accuracy: straightness of the cylinder µm, out of roundness µm, eccentricity µm. Measuring mandrels without draw bar thread, with external screw thread and nut Item No. Cone Dimensions cylinder ø/ length/ 82.58 Mc 0 2 75 82.582 Mc 2 75 82.58 Mc 2 24 50 82.584 Mc 2 200 82.585 Mc 4 40 00 82.586 Mc 5 40 00 82.587 Mc 6 6 500 82.588 Mec 80 80 500 Other models are available. Gauges for keyway depths on shafts With interchangeable gauge parts. Available in all coon fits. s available on request. C2.207.EN-dealer.200825 20, Schut Geometrische Meettechniek bv 224 Measuring instruments and systems 20/202-D

Thread gauges The prices of the thread gauges apply to the following tolerances: Kind of thread gauge Other tolerances, sizes and kinds of threads are available on request; also available are special screw threads as per your design. Left-hand screw thread: price on request. Measuring reports Tolerances gauge Metric thread according ISO 502 up to and incl. M.4 5H 6h larger than M.4 6H 6g (standard) 4h and 6e Fixing pipe thread DIN ISO 228 center A Trapezoidal thread DIN 0 7H 7e For all gauges also measuring reports can be ordered. Inspection report (German) per gauge. Stating of product specifications, measured values after production, used traceable measuring devices, measuring inaccuracy and measuring date. A favourable choice when your quality system does not require traceable (RvA) certificates. Traceable RvA certificate (Dutch) with measuring reports of the ordered gauges. Besides stating of the measured values the extra assurance of an external RvA inspection. and ring gauges Hardened steel thread plug gauges (up to M9: Go + NoGo, from M42: Go and NoGo separate) and thread ring gauges (Go or NoGo) for metric screw thread (ISO) with coarse pitch (ISO 502). M... x 0.25.2 x 0.25.4 x 0..6 x 0.5.8 x 0.5 2 x 0.4 2.2 x 0.45 2.5 x 0.45 x 0.5.5 x 0.6 4 x 0.7 4.5 x 0.75 5 x 0.8 6 x 8 x.25 0 x.5 2 x.75 4 x 2 6 x 2 8 x 2.5 20 x 2.5 22 x 2.5 24 x 27 x 0 x.5 x.5 6 x 4 9 x 4 Thread M... Go NoGo ring 42 x 4.5 45 x 4.5 48 x 5 52 x 5 56 x 5.5 60 x 5.5 C2.208.EN-dealer.200825 20, Schut Geometrische Meettechniek bv 225 Measuring instruments and systems 20/202-D

and ring gauges (continued) Hardened steel thread plug gauges (Go + NoGo) and thread ring gauges (Go or NoGo) for metric screw thread (ISO) with pitch 0.5 (ISO 502). M... x 0.5 5 6 8 0 2 4 6 8 20 Hardened steel thread plug gauges (Go + NoGo) and thread ring gauges (Go or NoGo) for metric screw thread (ISO) with pitch (ISO 502). M... x 8 0 2 4 6 8 20 22 24 25 26 27 28 0 Hardened steel thread plug gauges (Go + NoGo) and thread ring gauges (Go or NoGo) for metric screw thread (ISO) with pitch 0.75 (ISO 502). M... x 0.75 6 8 0 2 4 6 8 20 22 24 26 28 0 Hardened steel thread plug gauges (up to M40: Go + NoGo, from M42: Go and NoGo separate) and thread ring gauges (Go or NoGo) for metric screw thread (ISO) with pitch.5 (ISO 502). M... x.5 2 4 6 8 20 22 24 25 26 27 28 0 (continued on the next page) C2.209.EN-dealer.200825 20, Schut Geometrische Meettechniek bv 226 Measuring instruments and systems 20/202-D

and ring gauges (continued) M... x.5 (continued) 2 4 5 6 8 9 40 Thread M... x.5 Go NoGo ring 42 45 48 50 Hardened steel thread plug gauges (up to M40: Go + NoGo, from M42: Go and NoGo separate) and thread ring gauges (Go or NoGo) for metric screw thread (ISO) with pitch 2 (ISO 502). M... x 2 20 22 24 26 28 0 2 4 6 8 40 Thread M... x 2 Go NoGo ring 42 45 48 50 Hardened steel thread plug gauges (up to G": Go + NoGo, from G / 8 ": Go and NoGo separate) and thread ring gauges (Go or NoGo) for non-sealing fixing pipe thread (DIN ISO 228). G..." / 8 / 4 / 8 / 2 5 / 8 / 4 7 / 8 Thread G..." Go NoGo ring / 8 / 4 / 2 / 4 2 2 / 4 2 / 2 2 / 4 Hardened steel thread plug and thread ring gauges for sealing pipe thread (DIN 2999). R..." / 8 / 4 / 8 / 2 / 4 / 4 / 2 2 Larger sizes available on request C2.20.EN-dealer.200825 20, Schut Geometrische Meettechniek bv 227 Measuring instruments and systems 20/202-D

and ring gauges (continued) Hardened steel thread plug gauges (up to / 4 : Go + NoGo, from / 8 : Go and NoGo separate) and thread ring gauges (Go or NoGo) for American screw thread UNC and UNF according ANSI B. class 2B (thread plug) and 2A (thread ring). UNC No - 64 No 2-56 No - 48 No 4-40 No 5-40 No 6-2 No 8-2 No 0-24 No 2-24 / 4-20 5 / 6-8 / 8-6 7 / 6-4 / 2-9 / 6-2 5 / 8 - / 4-0 7 / 8-9 - 8 / 8-7 / 4-7 Thread UNC Go NoGo ring / 8-6 / 2-6 / 4-5 2-4 / 2 2 / 4-4 / 2 2 / 2-4 2 / 4-4 - 4 / 4-4 / 2-4 / 4-4 4-4 UNF No 0-80 No - 72 No 2-64 No - 56 No 4-48 No 5-44 No 6-40 No 8-6 No 0-2 No 2-28 / 4-28 5 / 6-24 / 8-24 7 / 6-20 / 2-20 9 / 6-8 5 / 8-8 / 4-6 7 / 8-4 - 2 / 8-2 / 4-2 Thread UNF Go NoGo ring / 8-2 / 2-2 C2.2.EN-dealer.200825 20, Schut Geometrische Meettechniek bv 228 Measuring instruments and systems 20/202-D

and ring gauges (continued) Hardened steel tapered thread plug and thread ring gauges for sealing pipe thread according ANSI/ASME B.20.. NPT..." / 6 / 8 / 4 / 8 / 2 / 4 / 4 / 2 2 2 / 2 and ring gauges in sets Sets of thread plug gauges or thread ring gauges for inspection of metric ISO threads. For threads M, M4, M5, M6, M8, M0 and M2. Tolerance class: thread plug gauges: 6H, thread ring gauges: 6g. Hardened steel. ISO 502. Delivery in a wooden case with an inspection report. 86.56 Item No. Thread gauges set 86.56 Plug gauges (Go + NoGo) 86.562 86.56 Ring gauges (Go) Ring gauges (NoGo) 86.562 Thread jaw gauges Jaw shaped gauge for inspection of external screw thread. Delivery excl. setting thread plug gauge. Available on request. C2.22.EN-dealer.200825 20, Schut Geometrische Meettechniek bv 229 Measuring instruments and systems 20/202-D

/ MEASURING WEDGES Drill gauges Gauge in the form of a steel plate with bores of increasing diameters for determining drill diameters. Twist drill grinding gauges For checking twist drills for the place and the 8 angle of the twist drill point. The maximum drill diameter is 50. 856.44 Item No. Meas. range Increment Number of bores 856.54 0. - 5 0. 50 856.55 0.5-5 0.05 90 856.56 0. - 0 0. 00 856.57 5-8 0.05 6 856.547 8-0 0.05 4 856.58 0.5-0 0.5 20 856.59 0-20 0.5 20 856.540-20 20 856.54 0-2.5 0. 26 856.544 2.6-5 0. 25 856.545 5. - 7.5 0. 25 856.546 7.6-20 0. 25 856.56 Universal twist drill grinding gauge, also called Y gauge. Besides the standard angle of 8, this gauge also has a 90 angle for countersink drills, and some special angles for center drills. Item No. Description 856.44 856.44 856.44 Twist drill grinding gauge Y gauge Measuring wedges Measuring wedges for quick measurements and checks of slits, key-ways, distances, etc. Measuring range: 0.4-26. Graduation: 0.05, 0. or 0.2. 909.56 Item No. Measuring range/ Graduation 909.55 0.4-6 0.05 909.56-5 0. 909.57 2-26 0.2 C2.0.EN-dealer.200825 20, Schut Geometrische Meettechniek bv 20 Measuring instruments and systems 20/202-D

Flat plug gauges Measuring range: - 60. Graduation: 0.. Stainless steel, no-glare chrome finished. Graduation on both sides. Ground measuring faces. Item No. Measuring range/ 907.876-5 909.56 5-0 909.57 0-45 909.54 45-60 907.876 Conical plug gauges Measuring range: ø - 45. Graduation: 0.. Hardened, ground and chrome finished. With anodized handle. 909.490 ø - 6 909.49 ø 4-5 909.492 ø 5-0 909.49 ø 0-45 909.490 Item No. Measuring range/ Nozzle gauges Set of pins in holder serving as a gauge to determine jet nozzle sizes. Nozzle gauges with vernier Nozzle gauges with a hardened and ground tapered needle. Measuring range: ø 0-5. Vernier: 0.0. 856.07 856.0 Item No. Number of pins Sizes 856.07 20 ø 0.45 -.50 856.08 6 ø.50 -.00 Item No. Measuring range/ 856.09 ø 0-856.0 ø 0-5 C2.2.EN-dealer.200825 20, Schut Geometrische Meettechniek bv 2 Measuring instruments and systems 20/202-D

THREAD CUTTING TOOL Center gauges For checking thread cutting tools for Whitworth thread 55 or metric thread 60. Item No. Description 856.444 856.445 Whitworth 55 Metric 60 856.444 856.445 Thread cutting tool gauges 856.446 856.447 856.449 Item No. Description 856.446 856.447 856.449 856.450 856.45 Universal thread cutting tool gauge for angular thread and flat thread Trapezoidal thread cutting tool gauge for trapezoidal thread DIN 0 (0, 2-2 ) Combined lathe and thread cutting tool gauge for cutting tool wedge angle, trapezoidal thread (0 ), and angular thread (55 and 60 ) Combined lathe and thread cutting tool gauge like 856.449, with additional angle stop (0-0 ) on the back Thread cutting tool gauge for rectangular thread, trapezoidal thread (0 ), and angular thread (55 and 60 ) 856.450 856.45 C7.202.EN-dealer.200825 20, Schut Geometrische Meettechniek bv 22 Measuring instruments and systems 20/202-D

ANGLE AND RADIUS Angle gauge set Measuring range: 5-90 (supplementary angles: 90-75 ). Increment: 5 (8 pieces). Multiple angles per angle gauge: primary angles (, 2 *,, 4), supplementary angles (5, 6), and ½ primary angles (7, 8). Delivery in a case. Angle gauges Measuring range: - 45. Number of blades: 20. Angles: - 2 - - 4-5 - 6-7 - 8-9 - 0-2 - 4-6 - 8-20 - 25-0 - 5-40 - 45. * Angle 2: only with the angle gauges from 20. Item No. Description 909.40 Angle gauge set Item No. Description 908.798 Angle gauges Radius gauges Measuring range radius: - 25. Increment: - : 0.25,.5-20 : 0.5, > 20 :.0. Shape and radius gauge This stainless steel gauge can be used to adopt various complex shapes of tools and workpieces. When the gauge is pressed against the part which has to be checked, it takes on the shape of this part. Because of the graduation () on the case, the shape can be checked easily. Because the tracers were supported under pressure, they don t move on their own. Item No. Radius range/ 907.766-7 907.767 7.5-5 907.768 5.5-25 Item No. Measuring range/ 86.9 50 x 40 C7.204.EN-dealer.200825 20, Schut Geometrische Meettechniek bv 2 Measuring instruments and systems 20/202-D

WELDING SEAM AND CALIPERS Set of welding seam gauges For weld thickness: - 2. Up to 7 increasing with 0.5, plus 8, 0 and 2. Total: 2 pieces. Bright steel. Welding seam gauge For measurement of welding seams. Graduation: 0.2. Stainless steel. Delivery in a case. Item No. Description Item No. Description 856.452 Welding seam gauges 856.48 Welding seam gauge Welding seam calipers For measurement of welding seams. Measuring range: 0-20. Analog: vernier 0., digital: resolution 0.0. Delivery in a case. Analog Stainless construction. Digital /inch conversion. On/off switch. Reset. Power supply: battery type V57. 86.42 906.429 The angles (60, 70, 80 and 90 ) serve as an aid for checking the angle of the hole to be welded. Item No. Measuring range/ Analog: 86.42 0-20 Digital: 906.429 0-20 Option: 86.55 Spare battery C7.20.EN-dealer.200825 20, Schut Geometrische Meettechniek bv 24 Measuring instruments and systems 20/202-D

TABLES / Thread and tolerance tables Thread table Table with all standard international thread indications: metric, Ww, Gas, BSF, Pg, BA, UNC, UNF and UNEF. Tolerance table Table compromising all tolerances and fits according ISO R286, up to 500 (table with over 6400 pairs of tolerance values for internal and external measurements). Conversion table /inch For converting from to inch and from inch to. 85.62 85.6 Item No. Description 85.62 85.6 85.64 Thread table Tolerance table Conversion table /inch 85.64 Flat thickness gauge Screw pitch gauges Gauge to e.g. measure the thickness of steel plating. Measuring range: -. Graduation: 0.5. Stainless steel. Item No. Measuring range/ 907.899 - Item No. Type of thread 856.456 856.457 856.458 856.459 856.460 856.46 Metric Whitworth BSP Metric/Whitworth Metric/Whitworth BSP UNC/UNF C2.24.EN-dealer.200825 20, Schut Geometrische Meettechniek bv 25 Measuring instruments and systems 20/202-D