Leading the world in induction heating technology ISO 9001:2000 Certified Inductoheat, Inc. 32251 N. Avis Dr., Madison Heights, MI 48071 TEL: (248) 585-9393 FAX: (248) 589-1062 Toll Free: (800) 624-6297 Email: sales@inductoheat.com www.inductoheat.com 2007 Inductoheat, Inc. All Rights Reserved. 1M 03/07 BULLETIN FT-100 Leading Manufacturers of Melting, Thermal Processing & Production Systems for the Metals & Materials Industry y WorldwideW For more information, call 800/624-6297 or visit www.inductoheat.com
Inductoheat, Inc. is part of the Inductotherm group which brings together some forty companies strategically located around the world. They all share a focus on serving the metals and materials industry and all are leaders in their respective disciplines. From the brilliant yellow of gold and the warm glow of copper to the cold gray of iron and steel, no matter what metal you melt, mold, heat or otherwise process, there s an Inductotherm Group company with the equipment, technology or services you need. Inductotherm group companies provide the equipment and services that allow industry to process metals from melting through casting, heating, rolling, drawing, forming and shaping into their final products. The Inductotherm Group worldwide Manufacturing Locations Inductoheat is leading the world in induction heating technologies by offering product lines ranging from general purpose machines to custom engineered, fully automated induction heating systems. With global technical support, our engineering excellence has no boundaries. The Headquarters, located in Madison Heights Michigan offers full service capabilities similar to a one-stop shop. Services include a comprehensive Process Development and Metallurgical Laboratory, complete engineering design and equipment manufacturing, a large induction coil build and repair department, customer training, and an Aftermarket support and service group. Customers get all the advantages plus flexibility in one company. As a multi-technology organization, the Inductotherm Group offers many advantages: The unique ability to offer the best solution from a broad range of available technologies. A single point of contact and single source of project responsibility. The support of a global network of engineering design, manufacturing and service facilities. Access to a full range of engineering, installation and repair services. A single point of contact gives customers global expertise on induction heat treating, heating for forging and power supplies for hardening, tempering, shrink fitting, low-frequency heating, strip heating, tube and pipe heating and much more. Inductoheat has been engineering, designing and manufacturing induction equipment for over 40 years. Whether you re performing heat treating, forging or another thermal process, Inductoheat can put the heat where you need it for quality parts. Innovative technology advances through group synergy. Automotive Bus & Truck Industrial Mining Off road Aeronautics Railroad Marine Hand tools OCTG
Advances in our technology include new standardized modular heat treating equipment such as, the InductoScan system with PC HMI/PLC program storage and touch screen controls. InductoScan heat treating equipment gives you the most flexible heat treating solution for today's needs, and as tomorrow's business changes, our standardized modules can be reconfigured to match your future production needs. Many metals require heating and/or heat treating to achieve their optimum physical properties. Our focus is to lead the market in quality heating and heat treating equipment by providing flexible and innovative systems for long-life performance. Since 1972, Inductoheat has continued to develop the design and manufacture of field proven power supplies. By providing efficient, controlled and accurately focused ideas, we make a valuable contribution to a diverse range of industrial processes. Our power supplies have the latest electronics and inverter technology circuitry. The ultimate power supplies tailored to your application; Hardening Tempering Annealing Tube heating Strip & Wire heating Gear heating Forge heating Low-frequency Shrink-fitting Bonding & Curing We offer an extensive collection of power supplies ranging from 5 kw - 3 MW. A wide variety of heating coils can be properly matched to these power supplies to meet your specific needs. Modular machines mean they can perform various heat treating applications, such as; scan, single-shot, lift/rotate, pick & place, rotary index and linear transfer. Simply connect three phase 480 V input power, cooling water and heating coil and you re ready to begin heating. Inductoheat induction heating equipment is a sure formula for low cost and efficient production requirements. Hardening Tempering Annealing Tube heating Pipe Q & T Gear hardening Forging Low-frequency heating Shrink fitting Strip heating Dual frequency
Heavy-duty twin chain tractor in-feed drive Rapid start Heavy duty design Standby hold circuitry HAZ Control Technology Inductoheat's new InductoForge modular billet heating system is a revolutionary product for the forging industry. The flexible modular design allows the forge shop to assemble an induction system that exactly matches its application requirements by allowing the addition or subtraction of power modules for future production needs. Inductoheat s uses (Heat Affected Zone technology) HAZ Control Technology to accurately control and automatically set-up a heating profile for the InductoForge billet heater to provide uniformly heated billets. The InductoForge system uses 500kW power modules that are capable of running at a wide range of frequencies (500Hz to 6000Hz). Each module is individually controlled resulting in a much finer and more accurate control of the billet temperature. In addition, this advanced technology allows for efficient heating over a wide range of billet diameters using a single size heavy-duty coil. A significant advantage of this innovative technology is reduced energy, utility and operating costs, ultimately increasing your productivity and profitability. Ross Line Frequency System Inductoheat manufactures heating equipment for an array of applications for the electric motor industry. Our experienced engineers design custom units for varnish and epoxy curing, lamination preheat for die casting and bluing, wire stripping, bond breaking, shaft shrink fit, bearing hardener, motor frame disassembly and more. A NEW PRODUCT INTRODUCED IN 2006 is the ROSS line frequency systems. These systems offer interchangeable tooling packages that use 60Hz to heat stators, rotors, housings, armatures, gears, bearings, small crankshafts, DC armatures, vibration dampers, tube, pipe and more. This unit is ideal for high volume production or rapid prototype work. Lower your manufacturing costs by utilizing a fraction of the floor space and energy. * Add 500kW modules Bar & Bar end heating * Add 500kW modules Billet & bar heating Warm forming Bar end heating Armatures Differential ring gears Flywheel ring gears Motor rotors Stators
Retrofit portions of high speed in-line annealing systems for copper tubing are energy efficient and are designed for operation in an inert gas. For 8 or shorter lengths of tube,inductoheat offers quench and temper lines for automotive, oil and gas, and special applications. Inductoheat, along with it s sister company Thermatool, offer a variety of induction heating systems for the pipe and tube industry. While Thermatool focuses on the tube and pipe producers, Inductoheat offers induction equipment for a variety of finishing applications. When forming or swaging tube or pipe, the annealing and/or stress relieving processes enhance your product properties by removing the residual stresses associated with these processes. Induction tube annealing equipment ranges from standalone units that anneal small tube sections, to system designed for integration into existing lines. For copper producers a variety of feeder systems for the annealing process are available, including basket to basket, basket to layer-wound pack or cut length bundle, and capillary tube spool to spool. Our metallurgical, technical and product expertise assure reliable and efficient performance when dealing with customized heating and specialized heat treating applications. Strip heating Non-rotational crankshaft heating Fillet hardening Titanium heating Semi-solid heating Large gear heating Laboratory applications Aluminum reheating Cylinder liner heating Pinion heating Small suscepetor Additional induction process include: Heating for bending End upset Surface or through hardening Thermal curing of paint, plastics and other coatings ROSS line frequency systems offer FluxManager technology enabling deep heating, uniform temperature profile & achieves rapid stress relieving. Extend pipe-life by improving torsion & bending strength in the swaged area. A wide variety of gear heating technologies. Tube Annealing Swaging Feeding Cooling Upsetting Specialized applications are for customers needing that Inductoheat refined treatment.
Metallurgical Laboratory Coil & Tooling Department Aftermarket Support Inductoheat s in-house Metallurgical Laboratory and Process Development Departments provide expertise on the development of induction heating and heat treatment for ferrous and non-ferrous-based alloys to improve product life. Process feasibility along with computer modeling and process simulation studies aid in the development of induction heat treatment of your part design. Our trained metallurgists, staff and state-of-the-art lab equipment ensures quality craftsmanship at all levels of your products life cycle. Equipment capabilities include; Hardness testers Metallography systems, Image analyzers Scanning electron microscope Carbon sulfur analyzer Specialized instruments Inductoheat is equipped with a fully radiometric thermal imager with visual and thermal composite image functionality. We perform prototype heat treatment on parts with over a dozen of our own processing machines, using machining & tooling that is similar or identical to the ones used in production. We re experts in inductor design, manufacture and repair of simple fabricated designs to complex induction coil types, including forge coils. Our in-house induction coil and tooling departments offer six new machining centers for high quality workmanship of prototype and production coils. Inductors are designed with the help of CAD systems and built specifically to meet the needs of our customers. We also provide component design, build and repair as well as trouble-shooting for entire systems. A wide variety of inductor services ensure that each tool, whether new or repaired, will produce parts with consistent quality. Inductors and variable ratio isolation transformers are rebuilt to like-new conditions that meet their original specifications. We design, build and completely rebuild our own and all designs of medium frequency and RF- transformers and inductors. Our Induction Coil and Engineering Departments combined with Aftermarket support specialists, provide continuous quality assurance throughout your Inductoheat experience. Inductoheat s Aftermarket i team offers the industry s highest level of technical support and service for when you need it the most. Fast! A large inventory of spare parts is ready for immediate delivery. Inductors Capacitors Power Supply Electronics QRS & WRS Components Transformers, Tooling & Buses Insta-Change Quick Disconnects Transistors, Mos-fets, SCRs & Diode s Field service engineers are available for repair, rebuild, and preventative maintenance of induction heating equipment. "Hands-On" training is available at the customers location. Customized formal training classes can also be provided. When you require complete service anytime, call our 24 hr. emergency hotline at (888) 241-8386. Sample preparation Metallography systems SEM Process machines Inspection systems Prototype & production coils Custom designed inductors QC sign-off Spare parts