Commercial Swimming Pool Equipment

Commercial Swimming Pool Equipment Filters Pumps Water Treatment Berlin Filter 64 KIVU Pumps 88 Water Treatment 96 Delta Filters 65-67 Maxim Pump 89 Commercial Filters 68 BX Pumps 90 Pool Return Inlets Valve Batteries 69 Pool Return Inlets 97 Gauges 69 Strainers Double Action Air Relief 69 Strainers 91 Accessories Praga Filters 70-71 Flanges 93 Ladders & Rails 98 Oslo Filters 72-74 Waterlift 99 Rodas Filters 75-86 Heaters Grating 100-104 Commercial Blowers 87 HR Commercial Heaters 94 Filter Media 87 Commercial Heat Pumps 95 Fittings Pressure Fittings 105-112 PVC Valves 113-120 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 63

FILTRATION Berlin Filter 750mm - 1200mm (Sand bed depth: 0.6m) Fibreglass wound, with a dust-repellent coating, 400mm diameter lid fixed with S/S bolts. Complete with pressure gauge, manual air vent and water purge valves. Maximum operating pressure 250 kpa (2.5 bar). Test pressure: 375 kpa. Ordering: Multiport valve or valve manifold must be ordered separately. Warranty: 2 year full plus 8 year pro rata warranty on filter tank and 1 year full warranty on internal components, gauges and valves. Refer to instructions and website for full warranty details Filter Area m2 Connections Product Code List Price Flows at 50m3 / HR / m2 Filter Area Berlin Filter 750mm - 20,000 LPH 0.50m2 50mm 00543-0100 $2,590.00 50mm Multiport Valve - Side Mount 50mm 17888 $288.76 Berlin Filter 900mm - 30,000 LPH 0.60m2 65mm 00544 $3,740.00 65mm Multiport Valve - Side Mount 65mm 24837 $930.00 65mm Unions to suit 65mm MPV 65mm 02359 $52.07 Berlin Filter 1050mm - 43,000 LPH 0.80m2 65mm 00545 $4,755.00 65mm Multiport Valve - Side mount 65mm 24837 $930.00 65mm Unions to suit 65mm MPV 65mm 02359 $52.07 Berlin Filter 1200mm - 56,000 LPH 1.13m2 80mm 00546 $5,525.00 80mm Multiport Valve with connections 80mm 18515 $1,270.00 D Side Mount Filter 00543 00544 00545 00546 D mm 750 900 1050 1200 H mm 1050 1145 1300 1450 M mm 610 685 810 870 N mm 380 415 500 560 Connections 2 65mm 65mm 80mm Flow m3/h 21 30 43 56 Approx. Pool m3 115-170 170-240 240-350 350-450 Sand / Gravel kg 300 525 575/300 800/300 Net weight kg 27.5 43.4 83 93 Packing volume m3 0.26 0.99 1.92 2.75 H D N M M N H 64 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

FILTRATION Delta 10 Filter (Sand bed depth: 1.0m) The new range of laminated Delta filters has evolved from the PTK filter series. Using new manufacturing processes, which provides multiple product configuration options. A new 30% larger joint reinforces the seal of both parts of the filter with double security: fibreglass laminated on the inside and high tensile strength composite at the outer union of the filter. All connections are on a thicker base, thus improving resistance. Connection to any valve is also made easier thanks to the re-location of the fittings. The height of the lower part of the filter has been increased in order to strengthen the internal nozzle plate support. Maximum operating pressure 250 kpa, Test Pressure 375 kpa. Filtration velocity 40m3/h/m2. Sand bed depth 1m. 0.3mm slotted laterals. 200mm Lateral Manhole. 200mm diameter rapid fitting lid on 800mm Diameter Options: Vinylester resin construction, multiport valve. Nozzle Collector Plate 0.5mm. See below. Ordering: Check stock & leadtime, refer to option codes and prices. Warranty Guide: 2 year full warranty on filter tank and 1 year full warranty on internal components, gauges, valves. Refer to instructions and website for full warranty details Tanks - Lateral Collector Arms - Max working pressure: 250kPa (2.5 bar) Product Code Diameter Connections List Price Delta 10 Filter - 650mm - 13,300 36676-000 650mm 40mm $3,650.00 Delta 10 Filter - 800mm - 20,000 36677-000 800mm 50mm $4,845.00 Delta 10 Filter - 1000mm - 28,000 36678-000 1000mm 65mm P.O.A Delta 10 Filter- 1200mm - 45,000 36679-000 1200mm 80mm $9,650.00 DN200 Quick Fit Lid for 650mm & 800mm only Tanks - Nozzle Collector Plate - Max working pressure: 250kPa (2.5 bar) Product Code Diameter Connections List Price Delta 10 Filter - 650mm - 13,300 36684-100 650mm 40mm P.O.A Delta 10 Filter - 800mm - 20,000 36685-100 800mm 50mm P.O.A Delta 10 Filter - 1000mm - 28,000 36686-100 1000mm 65mm P.O.A Delta 10 Filter - 1200mm - 45,000 36687-000 1200mm 80mm P.O.A DN400 Bolt Down Fit Lid for 1000mm & 1200mm Options Product Code List Price FX 90 Vinylester construction resistant to Ozone concentrations less than 0.4 ppm Refer to page 50 Multiport Valve 40mm MPV - S/M 17887 $219.33 Multiport Valve 50mm MPV - S/M 17888 $288.76 Multiport Valve 65mm MPV - S/M 24837 $930.00 Union Adaptor 65mm X 2 1/2"" B 02359 $52.07 Multiport Valve 80mm with unions 18515 $1,270.00 Unions between valve and tank included (on codes 17888 & 24837) Add 10% of filter price inc Options Replaces the PTK Series Filters All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 65

FILTRATION Delta 12 Filter (Sand bed depth: 1.2m) The Delta 1200 filter is equivalent to the old PTK series 1200 and is available in 650, 800, 1000 and 1200 mm diameters. Maximum operating pressure 250 kpa, Test Pressure 375 kpa. Filtration velocity 30m3/h/m2. Sand bed depth 1.2m. 0.3mm slotted laterals or nozzle plate collector. Sight Glass, 200mm side manhole. 200mm diameter bolt down lid. Lids as per previous page Options: Vinylester resin construction, multiport valve. Nozzle Collector Plate. See below. Ordering: Check stock & leadtime, refer to option codes and prices. Warranty: 2 year full warranty on filter tank and 1 year full warranty on internal components, gauges, valves. Refer to instructions and website for full warranty details Tanks - Lateral Collector Arms - Max working pressure: 250kPa (2.5 bar) Product Code Diameter Connections List Price Delta 12 Filter - 650mm - 13,300 36680-001 650mm 40mm P.O.A Delta 12 Filter - 800mm - 20,000 36681-001 800mm 50mm P.O.A Delta 12 Filter - 1000mm - 23,000 36682-001 1000mm 65mm $9,650.00 Delta 12 Filter- 1200mm - 34,000 36683-001 1200mm 80mm P.O.A Collector arms detail Tanks - Lateral Collector Arms - Max working pressure: 250kPa (2.5 bar) Product Code Diameter Connections List Price Delta 12 Filter - 650mm - 13,300 36688-101 650mm 40mm P.O.A Delta 12 Filter - 800mm - 20,000 36689-101 800mm 50mm P.O.A Delta 12 Filter - 1000mm - 23,000 36690-101 1000mm 65mm $12,875.00 Delta 12 Filter - 1200mm - 34,000 36691-101 1200mm 80mm P.O.A Options Nozzle plate details Product Code List Price FX 90 Vinylester construction resistant to Ozone concentrations less than 0.4 ppm Refer to page 50 Multiport Valve 40mm MPV - S/M 17887 $219.33 Multiport Valve 50mm MPV - S/M 17888 $288.76 Multiport Valve 65mm MPV - S/M 24837 $930.00 Union Adaptor 65mm X 2 1/2"" B 02359 $52.07 Multiport Valve 80mm with unions 18515 $1,270.00 Valve Manifold - Battery - 5 Valve 00776-1 $2,845.00 Valve Battery Support 80m 28694 $119.03 Valve Battery Vertical Support 2.3m 28691 $196.18 Add 10% of filter price inc Options Replaces the PTK Series Filters 66 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

FILTRATION Delta Filters DELTA 1000 DELTA 1200 Collector Arms Nozzle Plate Collector Arms Nozzle Plate 36676 36677 36678 36679 36684 36685 36686 36687 36680 36681 36682 36683 36688 36689 36690 36690 D 650 800 1.000 1.200 650 800 1.000 1.200 650 800 1.000 1.200 650 800 1.000 1.200 Ø P 490 625 890 1145 490 625 890 1145 585 700 890 1145 585 700 890 1145 H 1702 1749 1840 1915 1802 1843 1955 2071 1825 1830 1960 1980 1925 1924 2075 2136 L 1000 1000 1000 1000 1000 1000 1000 1000 1200 1200 1200 1200 1200 1200 1200 1200 S (MM) 125 230 270 300 125 230 270 300 125 230 270 300 125 230 270 300 Ø T 200 200 400 400 200 200 400 400 200 200 400 400 200 200 400 400 Ø G 1.5 2 2.5 3 1.5 2 2.5 3 1.5 2 2.5 3 1.5 2 2.5 3 Flow rate m3/h at 30 m3hm2 Flow rate m3/h at 40m3/h/m2 Multilayer Single Layer Anthracite 0.8-1.6mm (l) Sand 0.4-0.8mm (kg) Gravel 1-2mm (kg) Gravel 3-5mm (kg) Sand 0.4-0.8mm (kg) Gravel 1-2mm (kg) 19 15 23 34 9 15 23 34 9 15 23 34 9 15 23 34 12 20 30 45 12 20 30 45 12 20 30 45 12 20 30 45 - - - - - - - - 148 250 387 564 148 250 387 564 - - - - - - - - 160 271 419 611 160 271 419 611 - - - - - - - - 46 78 120 175 46 78 120 175 - - - - - - - - 86 156 300 350 46 78 120 175 400 640 990 1425 400 640 990 1425 451 767 1325 1763 451 767 1325 1763 86 156 300 350 46 78 120 175 86 156 300 350 46 78 120 175 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 67

FILTRATION Commercial Filter Options Code - Delta, Praga, Oslo & Rodas Please read this page in conjunction with the following commercial filter pages. This codification system is used for Delta, Praga, Oslo and Rodas. Use code numbers to specify options when ordering. Insert these codes after filter product code to identify required options. Nozzle plate underdrain available on all Praga and Oslo filters and is supplied with air wash connection. Additional side manhole is recommended for nozzle plate filters to remove sand. Vinylester ozone resistant internal coating available on Praga, Oslo and Rodas (resistant to ozone concentrations less than 0.4ppm). Position 6 Defines the nozzle plate and vinylester options Position 7 Defines manhole options Position 8 Defines sightglass options 0 Filter without nozzle plate 0 No Manhole 0 No sightglass 1 Filter with nozzle plate 1 1 x 225mm manhole 1 1 x sightglass - laminated filter 2 Vinylester finish 2 1 x 400mm manhole 2 1 x 135mm sightglass 3 Nozzle Plate & Vinylester 3 2 x 225mm manhole 3 2 x sightglass - laminted filter 4 2 x 400mm manhole 4 2 x 135mm sightglass Manhole Access for Commercial Filters - Delta, Praga, Oslo & Rodas Optional manhole for bobbin wound filters in side or top position with nominal diameters 225mm, 400mm, 500mm and 600mm. Manholes are in fibreglass reinforced polyester in the form of a flange with concave lid and can only be integrated into the filter at the factory or by a specialist. Product Code List Price Side manhole 225mm diameter 07116 $1,165.00 Side manhole 400mm diameter 07115 $3,180.00 Side manhole 500mm diameter - Filters from 1200mm - 3000mm 27950 $4,285.00 Side manhole 600mm diameter - Filters from 1800mm - 3000mm 27951 P.O.A Sightglass options for Commercial Filters - Delta, Praga, Oslo & Rodas Optional sightglass for bobbin wound filters. Position above Sand Bed Product Code List Price SIGHT GLASS - 135MM 07117 $1,110.00 Vinylester options for Commercial Filters - Delta, Praga, Oslo & Rodas Vinylester lining for ozone concentrations less than 0.4 ppm Vinylester Interior Coating List Price Add 10% of filter price inc Options Vinylester options for Commercial Filters - Delta, Praga, Oslo & Rodas Nozzle Plate with 0.5mm Slots with Air Wash connection. Optimum filter bed wash with equal distribution of water. Air wash connection enables clean water savings. See above for ordering code. 68 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

FILTRATION Valve Battery Manifold - Suitable for Delta, Praga, Oslo & Rodas 5 valve manual backwash system (unassembled). Each kit includes: 5 x tee pieces, 2 x 90º Elbows, 5 x buttefly valves, 12 x stub flanges, 12 x backing ring, 12 x flat gaskets (bolts, nuts and washers not included). Ordering: Specify manifold supports and brackets if required. (each valve battery requires a 2 x vertical supports, 2 x support clamps kits, giving a total of 2 floor supports and 4 x pipe clamps). 40mm to 200mm In Line Sight Glasses See Page 103 Product Code Size List Price Valve Manifold - Battery - 5 Valve 00770-1 65mm $1,725.00 Valve Manifold - Battery - 5 Valve 00776-1 80mm $2,845.00 Valve Manifold - Battery - 5 Valve 00780-1 100mm $3,560.00 Valve Manifold - Battery - 5 Valve 09177-1 150mm $6,685.00 Valve Manifold - Battery - 5 Valve 09185-1 200mm $10,810.00 Valve Battery Manifold Supports Valve battery support system suitable for pipe sizes from 80mm to 200mm Ordering: Each valve manifold requires 2 x vertical supports, 2 x support clamps kits, giving a total of 2 vertical supports and 4 x pipe clamps. Product Code List Price Vertical Support: height 1.85m 28690 $149.89 Vertical Support: height 2.30m 28691 $196.18 Vertical Support: height 3.0m 28692 $207.21 2 support clamp and anchors - 65mm 28693 $116.82 2 support clamp and anchors - 80mm 28694 $119.03 2 support clamp and anchors - 100mm 28695 $121.23 2 support clamp and anchors - 150mm 28698 $137.77 2 support clamp and anchors - 200mm 28700 $196.18 Gauges Pressure Gauge Panels Complete, suitable for AstralPool Commercial filters Product Code List Price Gauge Panel complete with 2 x Gauges Pressure Gauge Panel - 2.5 Bar 00729 $276.63 Pressure Gauge Panel - 4 Bar 00730 $276.63 Gauge Only Pressure Gauge - 2.5 Bar 4404170102 $96.04 Pressure Gauge - 4 Bar 4404170101 $96.04 Double Action Air Relief Product Code List Price Double Action Air Relief Valve - 25mm To be installed with air purge valve on commercial filters when installed above water level. Body made in PP & Fibreglass. Seal - Nitrile Rubber 09381 $149.89 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 69

FILTRATION Praga Filters (Sand bed depth: 1.0m) Bobbin wound fibreglass commercial filters with diameters from 1050mm to 3000mm. Filter lid is 400mm diameter with air purge valve, 20mm slotted laterals in parallel layout, sand dump port, water drain valve, pressure gauge panel. Maximum operating pressure 250 kpa and 400 kpa models available. Options: Vinylester interior lining, nozzle plate underdrain, sightglass, side manhole, valve batteries. When ordered with nozzle plate collector we recommend the inclusion of a side manhole, specify size and position (225mm, 400mm, 500mm or 600mm). Ordering: Refer to Options Page for option codes and pricing. Warranty guide: 2 year full plus 8 year pro rata warranty on filter tank and 1 year full warranty on internal components, gauges, valves. Refer to instructions and website for full warranty details * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250 kpa (2.5 bar) - Test pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Praga Filter Ø 1050 00687 20 17 63 mm* P.O.A Praga Filter Ø 1050 00694 30-40 25-34 65 mm $7,170.00 Praga Filter Ø 1200 00688 20-30 22-33 65 mm P.O.A Praga Filter Ø 1200 00702 40 45 80mm $8,045.00 Praga Filter Ø 1400 00689 20 30 65 mm P.O.A Praga Filter Ø 1400 00696 30 46 80 mm $9,970.00 Praga Filter Ø 1400 00703 40 61 100mm $10,330.00 Praga Filter Ø 1600 00690 20 40 80mm P.O.A Praga Filter Ø 1600 00697 30-40 60-80 100mm $12,895.00 Praga Filter Ø 1800 00691 20 50 80mm P.O.A Praga Filter Ø 1800 00698 30 76 100mm $12,685.00 Praga Filter Ø 1800 00705 40 101 125mm* P.O.A Praga Filter Ø 1800 00711 40 101 140mm $14,115.00 Praga Filter Ø 2000 00692 20 62 100mm $15,360.00 Praga Filter Ø 2000 00699 30 94 125mm* $16,235.00 Praga Filter Ø 2000 00706 40 125 140mm* $16,435.00 Praga Filter Ø 2000 05083 40 125 160mm $16,120.00 Praga Filter Ø 2350 00693 20 87 125mm* $30,855.00 Praga Filter Ø 2350 00700 30 130 140mm* $31,680.00 Praga Filter Ø 2350 04935 40 175 150mm $33,225.00 Praga Filter Ø 2500 08695 20 100 140mm* P.O.A Praga Filter Ø 2500 08696 30 150 150mm $35,810.00 Praga Filter Ø 2500 08697 40 200 200 mm* P.O.A Praga Filter Ø 3000 08699 20 140 150 mm P.O.A Praga Filter Ø 3000 08700 30 212 200mm * P.O.A 70 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

FILTRATION Praga Filters (Sand bed depth: 1.0m) Tanks - Maximum working pressure: 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Praga Filter Ø 1050 09209 20 17 63 mm* P.O.A Praga Filter Ø 1050 00712 30-40 25-34 65 mm $10,045.00 Praga Filter Ø 1200 00713 20-30 22-33 65 mm P.O.A Praga Filter Ø 1200 00719 40 45 80 mm $9,860.00 Praga Filter Ø 1400 09210 20 30 65 mm P.O.A Praga Filter Ø 1400 00714 30 46 80mm $10,170.00 Praga Filter Ø 1400 00720 40 61 100 mm $11,770.00 Praga Filter Ø 1600 09211 20 40 80 mm P.O.A Praga Filter Ø 1600 00715 30-40 60-80 100mm $13,605.00 Praga Filter Ø 1800 09212 20 50 80mm P.O.A Praga Filter Ø 1800 00716 30 76 100mm $14,890.00 Praga Filter Ø 1800 00722 40 101 125mm* $15,780.00 Praga Filter Ø 2000 09213 20 62 100mm P.O.A Praga Filter Ø 2000 00717 30 94 125mm* P.O.A Praga Filter Ø 2000 00723 40 125 140mm* $18,570.00 Praga Filter Ø 2350 09214 20 87 125mm* P.O.A Praga Filter Ø 2350 09217 30 130 140mm* P.O.A Praga Filter Ø 2350 09220 40 175 150mm $39,865.00 Praga Filter Ø 2500 09215 20 100 140mm* P.O.A Praga Filter Ø 2500 09218 30 150 150mm P.O.A Praga Filter Ø 2500 09221 40 200 200 mm* P.O.A Ø 1,050 1,200 1,400 1,600 1,800 2,000 2,350 2,500 3,000 Flange Ø - - - - - - - - - Height of filtration 1 1 1 1 1 1 1 1 1 sand (m) H 1,640 1,780 1,755 1,835 1,875 2,040 2,520 2,550 2,750 B 200 230 240 260 280 300 340 340 350 A 540 570 585 680 720 790 965 1,080 1,110 C 645 640 610 515 465 510 600 450 440 Ø P 755 940 1,085 1,230 1,370 1,550 1,859 1,859 2,650 E 90 90 90 140 140 140 140 140 140 Filtration surface (m2) 0.86 1.13 1.54 2.01 2.54 3.14 4.34 4.90 7.07 Volume (I) 1,050 1,500 2,000 2,600 3,400 4,400 8,045 9,050 12,800 Sand 0.4-0.8mm (kg) 950 1,375 1,650 2,150 2,800 3,800 5,275 5,950 8,600 Gravel 1-2mm (kg) 300 300 450 675 750 1,050 1,800 2,200 3,300 Total Weight in operation (kg) 2,000 2,700 3,700 4,900 6,100 7,900 12,550 13,760 20,200 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 71

FILTRATION Oslo Filters - Technical Data & Dimensions (see overpage for media requirements) Ø 1050 1200 1400 1600 1800 2000 2350 2500 3000 Filtration 30 40 30 40 30 40 30 40 30 40 30 40 30 40 30 40 30 40 Velocity (M3/H/ M2)) Ø N 75 90 75 110 90 125 110 140 125 160 125 160 140 200 160 225 200 250 DN65 DN80 DN65 DN100 DN80 DN110 DN100 DN125 DN110 DN150 DN110 DN150 DN125 DN175 DN150 DN200 DN175 DN225 2.5 bar 04611 04612 04613 04650 04615 04616 04619 04651 04623 04624 04626 04652 08693 08694 08704 08706 08708 08710 4 bar 05168 05173 05169 05174 07436 07437 05170 05175 07438 07439 05171 05176 05172 05177 08712 08714 08716 08718 Flow 25 34 33 45 46 61 60 80 76 101 94 125 130 175 150 200 212 282 Rate m3/h Filtration 0.86 1.13 1.54 2.01 2.54 3.14 4.34 4.90 7.07 area m2 Vol (l) 1500 1860 2700 3620 4725 5800 8800 9850 15350 Amm 650 670 680 780 790 790 1065 1125 1150 Bmm 940 920 820 800 780 840 700 450 600 Cmm 770 770 840 870 950 950 1030 1080 1140 Fmm 1550 1550 1570 1625 1625 1695 1850 1760 1870 Hmm 2070 2080 2175 2310 2320 2460 2720 2750 2950 Lmm 1240 1390 1590 1790 1990 2190 2550 2700 3200 Ø P mm 750 940 1085 1230 1370 1550 1830 1830 2365 R mm 55 45 45 45 45 45 45 45 45 Ø S mm 90 90 90 140 140 140 140 140 140 T mm 1220 1380 1570 1780 2000 2200 2550 2750 3200 W mm 325 350 350 400 400 400 500 500 500 Total service weight kg 2450 3000 4300 5825 7300 9000 13750 14885 21615 With laterals With nozzle plate 72 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

FILTRATION Oslo Filters (Sand bed depth: 1.2m) Vertical high performance bobbin wound fibreglass filter. Equipped with pressure gauge, manual air vent, water purge and laterals with 0.3mm slots. Options: Nozzle collector plate with 0.5mm slots. Side manhole. Additional sightglass. Vinylester internal lining. s available for maximum working pressure 250 kpa (2.5 bar) and 400 kpa (4.0 bar). Ordering: Refer to Options Page for option codes and pricing. **All filter vessels from 2350mm diameter will require special transport. Please ask for a quotation at the time of your enquiry. Warranty guide: 2 year full plus 8 year pro rate warranty on filter tank and 1 year full warranty on internal components, gauges, valve. Refer to instructions and website for full warranty details * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250kPa (2.5 bar) - Test Pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Oslo Filter Ø 1.050 04611 30 25 65mm P.O.A Oslo Filter Ø 1.050 04612 40 34 80mm $11,550.00 Oslo Filter Ø 1.200 04613 30 33 65mm P.O.A Oslo Filter Ø 1.200 04650 40 45 100mm $13,790.00 Oslo Filter Ø 1.400 04615 30 46 80mm $15,550.00 Oslo Filter Ø 1.400 04616 40 61 125mm* P.O.A Oslo Filter Ø 1.600 04619 30 60 100mm $19,080.00 Oslo Filter Ø 1.600 04651 40 80 140mm* P.O.A Oslo Filter Ø 1.800 04623 30 76 125mm* P.O.A Oslo Filter Ø 1.800 04624 40 100 150mm $29,330.00 Oslo Filter Ø 2.000 04626 30 94 125mm* P.O.A Oslo Filter Ø 2.000 04652 40 125 150mm $29,235.00 Oslo Filer Ø 2.350 08693 30 130 140mm* P.O.A Oslo Filter Ø 2.350 08694 40 175 200mm* P.O.A Oslo Filter Ø 2.500 08704 30 150 150mm $47,960.00 Oslo Filter Ø 2.500 08706 40 200 225mm P.O.A Oslo Filter Ø 3.000 08708 30 212 200mm* P.O.A Oslo Filter Ø 3.000 08710 40 282 250mm P.O.A All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 73

FILTRATION Tanks - Maximum working pressure 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Oslo Filter Ø 1.050 05168 30 25 65mm P.O.A Oslo Filter Ø 1.050 05173 40 34 80mm $14,310.00 Oslo Filter Ø 1.200 05169 30 33 65mm P.O.A Oslo Filter Ø 1.200 05174 40 45 100mm $17,425.00 Oslo Filter Ø 1.400 07436 30 46 80mm $19,785.00 Oslo Filter Ø 1.400 07437 40 61 125mm* $20,325.00 Oslo Filter Ø 1.600 05170 30 60 100mm $23,795.00 Oslo Filter Ø 1.600 05175 40 80 140mm* P.O.A Oslo Filter Ø 1.800 07438 30 76 125mm* P.O.A Oslo Filter Ø 1.800 07439 40 100 150mm P.O.A Oslo Filter Ø 2.000 05171 30 94 125mm* P.O.A Oslo Filter Ø 2.000 05176 40 125 150mm $36,240.00 Oslo Filter Ø 2.350 05172 30 130 140mm* P.O.A Oslo Filter Ø 2.350 05177 40 175 200mm* $43,805.00 Oslo Filter Ø 2.500 08712 30 150 150mm P.O.A Oslo Filter Ø 2.500 08714 40 200 225mm P.O.A Oslo Filter Ø 3.000 08716 30 212 200mm* P.O.A Oslo Filter Ø 3.000 08718 40 282 250mm P.O.A OSLO - MEDIA RECOMMENDATIONS MULTILAYER - Nozzle plate - Filtration bed 1.2 m Diameter mm 1050 1200 1400 1600 1800 2000 2350 2500 2600 2800 3000 Hydroanthracite (0.8-1.6) Kg 600 mm 450 575 775 1000 1275 1575 2175 2450 2548 2956 3550 Sand (0.4-0.8) Kg 400 mm 475 625 825 1100 1400 1700 2350 2675 2973 3448 3850 Gravel (1-2) Kg 100 mm 150 175 250 300 400 500 675 775 796 924 1100 Gravel (3-5) Kg 100 mm 150 175 250 300 400 500 675 775 796 924 1100 MULTILAYER - Nozzle plate - Filtration bed 1.5 m Diameter mm 1050 1200 1400 1600 1800 2000 2350 2500 2600 2800 3000 Hydroanthracite (0.8-1.6) Kg 600 mm 450 575 775 1000 1275 1575 2175 2450 2548 2956 3550 Sand (0.4-0.8) Kg 600 mm 725 950 1250 1650 2100 2550 3525 4025 4460 5172 5775 Gravel (1-2) Kg 100 mm 150 175 250 300 400 500 675 775 796 924 1100 Gravel (2-3) Kg 100 mm 150 175 250 300 400 500 675 775 796 924 1100 Gravel (3-5) Kg 100 mm 150 175 250 300 400 500 675 775 796 924 1100 SINGLELAYER - Nozzle plate - Filtration bed 1.2 m Diameter mm 1050 1200 1400 1600 1800 2000 2350 2500 2600 2800 3000 Sand (0.4-0.8) Kg 1100 mm 1300 1775 2300 3000 3800 4650 6300 7075 8176 9483 10575 Gravel (1-2) Kg 100 mm 150 175 250 300 400 500 675 775 796 924 1100 SINGLELAYER - Nozzle plate - Filtration bed 1.5 m Diameter mm 1050 1200 1400 1600 1800 2000 2350 2500 2600 2800 3000 Sand (0.4-0.8) Kg 1200 mm 1450 1900 2500 3300 4200 5100 7050 8050 8920 10345 11550 Gravel (1-2) Kg 100 mm 150 175 250 300 400 500 675 775 7964 9236 1100 Gravel (2-3) Kg 100 mm 150 175 250 300 400 500 675 775 7964 9236 1100 Gravel (3-5) Kg 100 mm 150 175 250 300 400 500 675 775 7964 9236 1100 MULTILAYER - Collector arms - Filtration bed 1.2 m Diameter mm 1050 1200 1400 1600 1800 2000 2350 2500 2600 2800 3000 Hydroanthracite (0.8-1.6) Kg 600 mm 450 575 775 1000 1275 1575 2175 2450 2548 2956 3550 Sand (0.4-0.8) Kg 400 mm 475 625 825 1100 1400 1700 2350 2675 2973 3448 3850 Gravel (2-3) Kg 100 mm 150 175 250 300 400 500 675 775 796 924 1100 Gravel (3-5) Kg 100 mm (1) 300 350 500 775 850 1150 1800 1975 2123 2463 3850 SINGLELAYER - Collector arms - Filtration bed 1.2 m Diameter mm 1050 1200 1400 1600 1800 2000 2350 2500 2600 2800 3000 Sand (0.4-0.8) Kg 1100 mm 1300 1775 2300 3000 3800 4650 6300 7075 8176 9483 10575 Gravel (1-2) Kg 100 mm (1) 300 350 500 775 850 1150 1800 1975 2123 2463 3850 74 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

FILTRATION Rodas Filter 1050mm (Sand bed depth: 0.6mm) Fibreglass horizontal commercial sand filters 1050 mm diameter. Maximum operating temperature 50ºC. Tested at 1.5 times maximum operating pressure. Equipped with pressure gauge panel, manual air, water purge and 400mm loading access. Internal components and pipe in PVC. Laterals 0.3 mm slots in PP. Bolts, nuts and washers in AISI- 316. EPDM seals and gaskets. Options: Options for side opening placement. Vinylester internal lining for ozone treated pools. Sightglass 135mm and 400mm side manhole. Ordering: Refer to Options Page for options codes and pricing. Warranty guide: 2 year full plus 8 year pro rate warranty on filter tank and 1 year full warranty on internal components, gauges, valve. Refer to instructions and website for full warranty details * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250 kpa (2.5 bar) - Test pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø 1.050 - length 1,900 05102 20 34 65mm P.O.A Rodas Filter Ø 1.050 - length 1.900 05105 30 52 80mm P.O.A Rodas Filter Ø 1.050 - length 1.900 05108 40 69 100mm $13,925.00 Rodas Filter Ø 1.050 - length 2.300 11331 20 42 100mm P.O.A Rodas Filter Ø 1.050 - length 2.300 11332 30 64 125mm* P.O.A Rodas Filter Ø 1.050 - length 2.300 11333 40 85 140mm* P.O.A Rodas Filter Ø 1.050 - length 2.500 24842 20 46 100mm P.O.A Rodas Filter Ø 1.050 - length 2.500 24843 30 70 125mm* P.O.A Rodas Filter Ø 1.050 - length 2.500 24844 40 93 140mm* P.O.A Rodas Filter Ø 1.050 - length 2.700 11334 20 50 100mm P.O.A Rodas Filter Ø 1.050 - length 2.700 11335 30 75 125mm* P.O.A Rodas Filter Ø 1.050 - length 2.700 11336 40 100 140mm* P.O.A Rodas Filter Ø 1.050 - length 3.000 22647 20 56 100mm P.O.A Rodas Filter Ø 1.050 - length 3.000 22648 30 84 140mm* P.O.A Rodas Filter Ø 1.050 - length 3.000 22649 40 112 150mm P.O.A Tanks - Maximum working pressure: 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø 1.050 - length 1,900 07124 20 34 65mm P.O.A Rodas Filter Ø 1.050 - length 1.900 07125 30 52 80mm P.O.A Rodas Filter Ø 1.050 - length 1.900 07126 40 69 100mm P.O.A Rodas Filter Ø 1.050 - length 2.300 11321 20 42 100mm $19,715.00 Rodas Filter Ø 1.050 - length 2.300 11322 30 64 125mm* $20,530.00 Rodas Filter Ø 1.050 - length 2.300 11323 40 85 140mm* P.O.A Rodas Filter Ø 1.050 - length 2.500 25016 20 46 100mm P.O.A Rodas Filter Ø 1.050 - length 2.500 25017 30 70 125mm* P.O.A Rodas Filter Ø 1.050 - length 2.500 25018 40 93 140mm* P.O.A Rodas Filter Ø 1.050 - length 2.700 11326 20 50 100mm P.O.A Rodas Filter Ø 1.050 - length 2.700 11327 30 75 125mm* P.O.A Rodas Filter Ø 1.050 - length 2.700 11328 40 100 140mm* P.O.A Rodas Filter Ø 1.050 - length 3.000 22683 20 56 100mm P.O.A Rodas Filter Ø 1.050 - length 3.000 22684 30 84 140mm* P.O.A Rodas Filter Ø 1.050 - length 3.000 20895 40 112 150mm P.O.A All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 75

FILTRATION Rodas Filters 1200mm (Sand Bed Depth: 0.6m) Fibreglass horizontal commercial sand filters 1200 mm diameter. Maximum operating temperature 50ºC. Tested at 1.5 times maximum operating pressure. Equipped with pressure gauge panel, manual air, water purge and 400mm loading access. Internal components and pipe in PVC. Laterals 0.3 mm slots in PP. Bolts, nuts and washers in AISI- 316. EPDM seals and gaskets. Options: Options for side opening placement. Vinylester internal lining for ozone treated pools. Sightglass 135mm and 400mm side manhole. Ordering: Refer to Options Page for options codes and pricing. Warranty guide: 2 year full plus 8 year pro rate warranty on filter tank and 1 year full warranty on internal components, gauges, valve. Refer to instructions and website for full warranty details * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250 kpa (2.5 bar) - Test pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø 1.200 - length 1,900 22650 20 39 100mm $16,990.00 Rodas Filter Ø 1.200 - length 1.900 22651 30 59 125mm* P.O.A Rodas Filter Ø 1.200 - length 1.900 22652 40 79 140mm* P.O.A Rodas Filter Ø 1.200 - length 2.300 22653 20 48 100mm P.O.A Rodas Filter Ø 1.200 - length 2.300 22654 30 73 140mm* P.O.A Rodas Filter Ø 1.200 - length 2.300 22655 40 97 150mm $21,515.00 Rodas Filter Ø 1.200 - length 2.500 24845 20 53 125mm* P.O.A Rodas Filter Ø 1.200 - length 2.500 24846 30 79 140mm* $15,810.00 Rodas Filter Ø 1.200 - length 2.500 24847 40 106 150mm P.O.A Rodas Filter Ø 1.200 - length 2.700 22656 20 57 125mm* P.O.A Rodas Filter Ø 1.200 - length 2.700 22657 30 86 140mm* P.O.A Rodas Filter Ø 1.200 - length 2.700 22658 40 115 150mm P.O.A Rodas Filter Ø 1.200 - length 3.000 22659 20 64 125mm* P.O.A Rodas Filter Ø 1.200 - length 3.000 22660 30 96 140mm* P.O.A Rodas Filter Ø 1.200 - length 3.000 22661 40 129 150mm $28,520.00 Tanks - Maximum working pressure: 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø 1.200 - length 1,900 22685 20 39 100mm $22,030.00 Rodas Filter Ø 1.200 - length 1.900 22686 30 59 125mm* P.O.A Rodas Filter Ø 1.200 - length 1.900 22687 40 79 140mm* P.O.A Rodas Filter Ø 1.200 - length 2.300 22688 20 48 100mm P.O.A Rodas Filter Ø 1.200 - length 2.300 22689 30 73 140mm* P.O.A Rodas Filter Ø 1.200 - length 2.300 20897 40 97 150mm P.O.A Rodas Filter Ø 1.200 - length 2.500 25019 20 53 125mm* P.O.A Rodas Filter Ø 1.200 - length 2.500 25020 30 79 140mm* P.O.A Rodas Filter Ø 1.200 - length 2.500 25021 40 106 150mm $29,875.00 76 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

FILTRATION Rodas Filter 1050mm & 1200mm Length Filtration Velocity (m3/h/ m3) Ø N 2.5 bar 4 bar Flow m3/h Filtration area m2 Vol (l) A B C E F H I P T W Total Service weight kg Sand Charge Kg Gravel Sand Diameter 1050mm - Height of filter bed 0.6m 1-1.2mm 0.4-0.8mm 1900 20 75 DN65 05102 07124 34 1.72 1480 630 325 760 380 190 1260 950 800 2160 170 2530 350 950 30 90 DN80 05105 07125 52 40 110 DN100 05108 07126 69 2300 20 110 DN100 11331 11321 42 2.12 1820 630 325 1000 460 190 1260 1150 800 2560 170 3100 475 1250 30 125 DN110 11332 11322 64 40 140 DN125 11333 11323 85 2500 20 110 DN100 24842 25016 46 2.32 2000 630 3235 1120 500 190 1260 1250 800 2760 170 3380 575 1525 30 125 DN110 24843 25017 70 40 140 DN125 24844 25018 93 2700 20 110 DN100 11334 11326 50 2.51 2170 630 325 1240 540 190 1260 1350 800 2960 170 3670 700 1800 30 125 DN110 11335 11327 75 40 140 DN125 11336 11328 100 3000 20 110 DN100 22647 22683 56 2.81 2430 630 325 1420 600 190 1260 1500 800 3260 170 4100 775 2025 30 140 DN125 22648 22684 84 40 160 DN150 22649 20895 112 Diameter 1200mm - Height of filter bed 0.6m 1900 20 110 DN100 22650 22685 39 1.96 1900 725 325 760 380 200 1390 950 900 2130 225 3220 425 1100 30 125 DN110 22651 22686 59 40 140 DN125 22652 22687 79 2300 20 110 DN100 22653 22688 48 2.42 2350 725 325 1000 460 200 1390 1150 900 2530 225 3960 550 1425 30 140 DN125 22654 23292 73 40 160 DN150 22655 20897 97 2500 20 125 DN110 24845 25019 53 2.65 2580 725 325 1120 500 200 1390 1250 900 2750 225 4320 700 1750 30 140 DN125 24846 25020 79 40 160 DN150 24847 25021 106 2700 20 125 DN110 22656 22690 57 2.87 2800 725 325 1240 540 200 1390 1350 900 2950 225 4690 825 2075 30 140 DN125 22657 22691 86 40 160 DN150 22658 20898 115 3000 20 125 DN110 22659 22692 64 3.21 3140 725 325 1420 600 200 1390 1500 900 3250 225 5240 925 2325 30 140 DN125 22660 22693 96 40 160 DN150 22661 20899 129 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 77

FILTRATION Rodas Filters 1400mm (Sand Bed Depth: 0.8m) Fibreglass horizontal commercial sand filters 1400 mm diameter. Maximum operating temperature 50ºC. Tested at 1.5 times maximum operating pressure. Equipped with pressure gauge panel, manual air, water purge and 400mm loading access. Internal components and pipe in PVC. Laterals 0.3 mm slots in PP. Bolts, nuts and washers in AISI- 316. EPDM seals and gaskets. Options: Options for side opening placement. Vinylester internal lining for ozone treated pools. Sightglass 135mm and 400mm side manhole. Ordering: Refer to Options Page for options codes and pricing. Warranty guide: 2 year full plus 8 year pro rate warranty on filter tank and 1 year full warranty on internal components, gauges, valve. Refer to instructions and website for full warranty details * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250 kpa (2.5 bar) - Test pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø 1.400 - length 1,900 24848 20 45 100mm P.O.A Rodas Filter Ø 1.400 - length 1.900 24849 30 67 125mm* P.O.A Rodas Filter Ø 1.400 - length 1.900 24850 40 89 140mm* P.O.A Rodas Filter Ø 1.400 - length 2.500 24854 20 60 100mm P.O.A Rodas Filter Ø 1.400 - length 2.500 24855 30 91 140mm* P.O.A Rodas Filter Ø 1.400 - length 2.500 24856 40 121 150mm P.O.A Rodas Filer Ø 1.400 - length 3.000 24860 20 73 125mm* P.O.A Rodas Filter Ø 1.400 - length 3.000 24861 30 110 150mm $34,610.00 Rodas Filter Ø 1.400 - length 3.000 24862 40 147 200mm* P.O.A Tanks - Maximum working pressure: 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø 1.400 - length 1,900 25022 20 45 100mm P.O.A Rodas Filter Ø 1.400 - length 1.900 25023 30 67 125mm* P.O.A Rodas Filter Ø 1.400 - length 1.900 25024 40 89 140mm* P.O.A Rodas Filter Ø 1.400 - length 2.500 25028 20 60 100mm P.O.A Rodas Filter Ø 1.400 - length 2.500 25029 30 91 140mm* P.O.A Rodas Filter Ø 1.400 - length 2.500 25030 40 121 150mm P.O.A Rodas Filter Ø 1.400 - length 3.000 25034 20 73 125mm* P.O.A Rodas Filter Ø 1.400 - length 3.000 25035 30 110 150mm $39,465.00 Rodas Filter Ø 1.400 - length 3.000 25036 40 147 200mm* P.O.A 78 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

FILTRATION Rodas Filter 1600mm (Sand bed depth: 1.0m) Fibreglass horizontal commercial sand filters 1600 mm diameter. Maximum operating temperature 50ºC. Tested at 1.5 times maximum operating pressure. Equipped with pressure gauge panel, manual air, water purge and 400mm loading access. Internal components and pipe in PVC. Laterals 0.3 mm slots in PP. Bolts, nuts and washers in AISI- 316. EPDM seals and gaskets. Options: Options for side opening placement. Vinylester internal lining for ozone treated pools. Sightglass 135mm and 400mm side manhole. Ordering: Refer to Options Page for options codes and pricing. Warranty guide: 2 year full plus 8 year pro rate warranty on filter tank and 1 year full warranty on internal components, gauges, valve. Refer to instructions and website for full warranty details. * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250 kpa (2.5 bar) - Test pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø 1.600 - length 1,900 22662 20 49 100mm P.O.A Rodas Filter Ø 1.600 - length 1.900 22663 30 74 140mm* P.O.A Rodas Filter Ø 1.600 - length 1.900 22664 40 99 150mm P.O.A Rodas Filter Ø 1.600 - length 2.500 24866 20 67 140mm* P.O.A Rodas Filter Ø 1.600 - length 2.500 24867 30 101 150mm P.O.A Rodas Filter Ø 1.600 - length 2.500 24868 40 134 200mm* P.O.A Rodas Filter Ø 1.600 - length 3.000 22671 20 82 140mm* P.O.A Rodas Filter Ø 1.600 - length 3.000 22672 30 123 150mm P.O.A Rodas Filter Ø 1.600 - length 3.000 22673 40 164 200mm $33,715.00 Tanks - Maximum working pressure: 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø 1.600 - length 1,900 22694 20 49 100mm $27,320.00 Rodas Filter Ø 1.600 - length 1.900 22695 30 74 140mm* P.O.A Rodas Filter Ø 1.600 - length 1.900 20900 40 99 150mm $31,805.00 Rodas Filter Ø 1.600 - length 2.500 25040 20 67 140mm* P.O.A Rodas Filter Ø 1.600 - length 2.500 25041 30 101 150mm P.O.A Rodas Filter Ø 1.600 - length 2.500 24868 40 134 200mm* P.O.A Rodas Filter Ø 1.600 - length 3.000 22700 20 82 140mm* $39,530.00 Rodas Filter Ø 1.600 - length 3.000 22701 30 123 150mm $43,100.00 Rodas Filter Ø 1.600 - length 3.000 20903 40 164 200mm $46,015.00 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 79

FILTRATION Rodas Filters 1800mm (Sand Bed Depth: 1.0m) Fibreglass horizontal commercial sand filters 1800 mm diameter. Maximum operating temperature 50ºC. Tested at 1.5 times maximum operating pressure. Equipped with pressure gauge panel, manual air, water purge and 400mm loading access. Internal components and pipe in PVC. Laterals 0.3 mm slots in PP. Bolts, nuts and washers in AISI- 316. EPDM seals and gaskets. Options: Options for side opening placement. Vinylester internal lining for ozone treated pools. Sightglass 135mm and 400mm side manhole. Ordering: Refer to Options Page for options codes and pricing. Warranty guide: 2 year full plus 8 year pro rate warranty on filter tank and 1 year full warranty on internal components, gauges, valve. Refer to instructions and website for full warranty details * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250 kpa (2.5 bar) - Test pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø 1.800 - length 2,500 24875 20 75 125mm* P.O.A Rodas Filter Ø 1.800 - length 2.500 24876 30 112 150mm $31,405.00 Rodas Filter Ø 1.800 - length 2,500 24877 40 150 200mm* P.O.A Rodas Filter Ø 1.800 - length 3.000 24881 20 92 140mm* P.O.A Rodas Filter Ø 1.800 - length 3,000 24882 30 137 150mm $36,225.00 Rodas Filter Ø 1.800 - length 3,000 24883 40 183 200mm* $37,095.00 Rodas Filter Ø 1.800 - length 3.500 24887 20 108 140mm* P.O.A Rodas Filter Ø 1.800 - length 3.500 24888 30 162 200mm* $36,775.00 Rodas Filter Ø 1.800 - length 3.500 24889 40 216 225mm $32,685.00 Rodas Filter Ø 1.800 - length 4.000 24893 20 125 150mm $53,495.00 Rodas Filter Ø 1.800 - length 4.000 24894 30 187 200mm* P.O.A Rodas Filter Ø 1.800 - length 4.000 24895 40 250 225mm P.O.A Tanks - Maximum working pressure: 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø 1.800 - length 2,500 25049 20 75 125mm* P.O.A Rodas Filter Ø 1.800 - length 2.500 25050 30 112 150mm $40,825.00 Rodas Filter Ø 1.800 - length 2,500 25051 40 150 200mm* P.O.A Rodas Filter Ø 1.800 - length 3.000 25055 20 92 140mm* P.O.A Rodas Filter Ø 1.800 - length 3,000 25056 30 137 150mm $44,850.00 Rodas Filter Ø 1.800 - length 3,000 25057 40 183 200mm* P.O.A Rodas Filter Ø 1.800 - length 3.500 25061 20 108 140mm* P.O.A Rodas Filter Ø 1.800 - length 3.500 25062 30 162 200mm* P.O.A Rodas Filter Ø 1.800 - length 3.500 25063 40 216 225mm P.O.A Rodas Filter Ø 1.800 - length 4.000 25067 20 125 150mm $69,110.00 Rodas Filter Ø 1.800 - length 4.000 25068 30 187 200mm* P.O.A Rodas Filter Ø 1.800 - length 4.000 25069 40 250 225mm P.O.A 80 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

FILTRATION Rodas Filter 1400mm, 1600 & 1800mm Length Filtration Velocity (m3/h/ m3) Ø N 2.5 bar 4 bar Flow m3/h Filtration area m2 Vol (l) A B C E F H I P T W Y Total Service weight kg Sand Charge Kg Diameter 1400mm - Height of filter bed 0.8m 1-1.2mm 0.4-0.8mm 1900 20 110 DN100 24848 25022 45 2.23 2530 810 390 720 380 210 1600 890 1080 2160 220 1380 4250 575 2100 30 125 DN110 24849 2503 67 40 140 DN125 24850 25024 89 2500 20 110 DN100 24854 25023 60 3.02 3460 810 390 1080 500 210 1600 890 1080 2780 220 1380 5740 800 2825 30 140 DN125 24855 25029 91 40 160 DN150 24856 25030 121 3000 20 125 DN110 24860 25034 73 3.67 4230 810 390 1380 600 210 1600 890 1080 3320 220 1380 6990 1000 3450 30 160 DN150 24861 25035 110 40 200 DN175 24862 25036 147 Diameter 1600mm - Height of filter bed 1m 1900 20 110 DN100 22662 22694 49 2.47 3220 925 475 470 475 240 1830 920 1230 2220 250 1380 5420 600 2850 30 140 DN125 22663 22695 74 40 160 DN150 22664 20900 99 2500 20 140 DN125 24866 25040 67 3.36 4430 925 475 1020 500 240 1830 920 1230 2820 250 1380 7400 850 3875 30 160 DN150 24867 25041 101 40 200 DN175 24868 25042 134 3000 20 140 DN125 22671 22700 82 4.1 5430 925 475 1320 600 240 1830 920 1230 3360 250 1380 9020 1050 4750 30 160 DN150 22672 22701 123 40 200 DN175 22673 20903 164 Diameter 1800 mm - Height of filter bed 1 m 2500 20 125 DN110 24875 25049 75 3.74 5530 1040 550 1020 380 270 2050 920 1380 2820 350 1380 9170 975 4850 30 160 DN150 24876 25050 112 40 200 DN175 24877 25051 150 3000 20 140 DN125 24881 25055 92 4.58 6800 1040 550 1320 460 270 2050 920 1380 3320 350 1380 11230 1225 5925 30 160 DN150 24882 25056 137 40 200 DN175 24883 25057 183 3500 20 140 DN125 24887 25061 108 5.41 8070 1040 550 1620 550 270 2050 920 1380 3850 350 1380 13290 1475 7000 30 200 DN175 24888 25062 162 40 225 DN200 24889 25063 216 4000 20 160 DN150 24893 25067 125 6.25 9340 1040 550 1920 540 270 2050 920 1380 4350 350 1380 15350 1700 8075 30 200 DN175 24894 25068 187 40 225 DN200 24895 25069 250 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 81

FILTRATION Rodas Filters 2000mm (Sand Bed Depth: 1.2m) Fibreglass horizontal commercial sand filters 2000 mm diameter. Maximum operating temperature 50ºC. Tested at 1.5 times maximum operating pressure. Equipped with pressure gauge panel, manual air, water purge and 400mm loading access. Internal components and pipe in PVC. Laterals 0.3 mm slots in PP. Bolts, nuts and washers in AISI- 316. EPDM seals and gaskets. Options: Options for side opening placement. Vinylester internal lining for ozone treated pools. Sightglass 135mm and 400mm side manhole. Ordering: Refer to Options Page for options codes and pricing. Warranty guide: 2 year full plus 8 year pro rate warranty on filter tank and 1 year full warranty on internal components, gauges, valve. Refer to instructions and website for full warranty details. * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250 kpa (2.5 bar) - Test pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø 2.000 - length 2,500 05103 20 87 140mm* P.O.A Rodas Filter Ø 2.000 - length 2.500 05106 30 130 150mm $34,180.00 Rodas Filter Ø 2.000 - length 2,500 05109 40 174 200mm* P.O.A Rodas Filter Ø 2.000 - length 3.000 24899 20 106 140mm* P.O.A Rodas Filter Ø 2.000 - length 3,000 24900 30 159 150mm $40,905.00 Rodas Filter Ø 2.000 - length 3,000 24901 40 212 200mm* P.O.A Rodas Filter Ø 2.000 - length 3.500 05104 20 125 150mm $43,310.00 Rodas Filter Ø 2.000 - length 3.500 05107 30 187 200mm* $44,050.00 Rodas Filter Ø 2.000 - length 3.500 05110 40 250 200mm $40,310.00 Rodas Filter Ø 2.000 - length 4.000 24908 20 144 150mm P.O.A Rodas Filter Ø 2.000 - length 4.000 24909 30 216 200mm* $46,300.00 Rodas Filter Ø 2.000 - length 4.000 24910 40 288 200mm P.O.A Rodas Filter Ø 2.000 - length 4.500 24914 20 163 200mm* P.O.A Rodas Filter Ø 2.000 - length 4,500 24915 30 245 200mm $54,625.00 Rodas Filter Ø 2.000 - length 4.500 24916 40 326 250mm $55,250.00 Tanks - Maximum working pressure: 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø 2.000 - length 2,500 07127 20 87 140mm* P.O.A Rodas Filter Ø 2.000 - length 2.500 07128 30 130 150mm P.O.A Rodas Filter Ø 2.000 - length 2,500 07129 40 174 200mm* P.O.A Rodas Filter Ø 2.000 - length 3.000 25073 20 106 140mm* P.O.A Rodas Filter Ø 2.000 - length 3,000 25074 30 159 150mm $53,495.00 Rodas Filter Ø 2.000 - length 3,000 25075 40 212 200mm* P.O.A Rodas Filter Ø 2.000 - length 3.500 07130 20 125 150mm $53,630.00 Rodas Filter Ø 2.000 - length 3.500 07131 30 187 200mm* P.O.A Rodas Filter Ø 2.000 - length 3.500 07132 40 250 200mm $59,160.00 Rodas Filter Ø 2.000 - length 4.000 25082 20 144 150mm P.O.A Rodas Filter Ø 2.000 - length 4.000 25083 30 216 200mm* P.O.A Rodas Filter Ø 2.000 - length 4.000 25084 40 288 200mm $67,970.00 Rodas Filter Ø 2.000 - length 4.500 25088 20 163 200mm* P.O.A Rodas Filter Ø 2.000 - length 4,500 25089 30 245 200mm $62,910.00 Rodas Filter Ø 2.000 - length 4.500 25090 40 326 250mm P.O.A 82 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

FILTRATION Rodas Filter 2350mm (Sand bed depth: 1.2m) Fibreglass horizontal commercial sand filters 2350 mm diameter. Maximum operating temperature 50ºC. Tested at 1.5 times maximum operating pressure. Equipped with pressure gauge panel, manual air, water purge and 400mm loading access. Internal components and pipe in PVC. Laterals 0.3 mm slots in PP. Bolts, nuts and washers in AISI- 316. EPDM seals and gaskets. Options: Options for side opening placement. Vinylester internal lining for ozone treated pools. Sightglass 135mm and 400mm side manhole. Ordering: Refer to Options Page for options codes and pricing. Warranty guide: 2 year full plus 8 year pro rate warranty on filter tank and 1 year full warranty on internal components, gauges, valve. Refer to instructions and website for full warranty details * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250 kpa (2.5 bar) - Test pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø 2.350 - length 3.000 24917 20 119 150mm P.O.A Rodas Filter Ø 2.350 - length 3,000 24918 30 178 200mm* P.O.A Rodas Filter Ø 2.350 - length 3,000 24919 40 238 200mm P.O.A Rodas Filer Ø 2.350 - length 3.500 17120 20 141 150mm P.O.A Rodas Filter Ø 2.350 - length 3.500 16696 30 212 200mm* P.O.A Rodas Filter Ø 2.350 - length 3.500 17121 40 282 200mm P.O.A Rodas Filter Ø 2.350 - length 4.000 24926 20 163 200mm* P.O.A Rodas Filter Ø 2.350 - length 4.000 24927 30 245 200mm P.O.A Rodas Filter Ø 2.350 - length 4.000 24928 40 327 250mm P.O.A Rodas Filter Ø 2.350 - length 4.500 22674 20 186 200mm* P.O.A Rodas Filter Ø 2.350 - length 4,500 22675 30 279 200mm $107,750.00 Rodas Filter Ø 2.350 - length 4.500 22676 40 371 250mm $107,750.00 Rodas Filter Ø 2.350 - length 5.000 24935 20 208 200mm* P.O.A Rodas Filter Ø 2.350 - length 5.000 24936 30 312 200mm P.O.A Rodas Filter Ø 2.350 - length 5.000 24937 40 416 250mm $93,445.00 Tanks - Maximum working pressure: 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø 2.350 - length 3.000 25091 20 119 150mm P.O.A Rodas Filter Ø 2.350 - length 3,000 25092 30 178 200mm* P.O.A Rodas Filter Ø 2.350 - length 3,000 25093 40 238 200mm P.O.A Rodas Filer Ø 2.350 - length 3.500 22702 20 141 150mm P.O.A Rodas Filter Ø 2.350 - length 3.500 22703 30 212 200mm* P.O.A Rodas Filter Ø 2.350 - length 3.500 22704 40 282 200mm P.O.A Rodas Filter Ø 2.350 - length 4.000 25100 20 163 200mm* P.O.A Rodas Filter Ø 2.350 - length 4.000 25101 30 245 200mm P.O.A Rodas Filter Ø 2.350 - length 4.000 25102 40 327 250mm P.O.A Rodas Filter Ø 2.350 - length 4.500 22705 20 186 200mm* P.O.A Rodas Filter Ø 2.350 - length 4,500 22706 30 279 200mm P.O.A Rodas Filter Ø 2.350 - length 4.500 22707 40 371 250mm P.O.A Rodas Filter Ø 2.350 - length 5.000 25109 20 208 200mm* P.O.A Rodas Filter Ø 2.350 - length 5.000 25110 30 312 200mm $116,480.00 Rodas Filter Ø 2.350 - length 5.000 25111 40 416 250mm P.O.A All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 83

FILTRATION Rodas Filters 2000mm & 2350mm Length Filtration Velocity (m3/h/ m3) Ø N 2.5 bar 4 bar Flow m3/h Filtration area m2 Vol (l) A B C E F H I P T W Y Total Service weight kg Sand Charge Kg Diameter 2000mm - Height of filter bed 1.2m 1-1.2mm 0.4-0.8mm 2500 20 140 DN125 05103 07127 87 4.34 6900 1090 710 1020 500 240 2220 1300 1470 2820 410 1250 11300 1050 M=1.2m 30 160 DN150 05106 07128 130 6575 M-1.2m 40 200 DN175 05109 07129 174 3000 20 140 DN125 24899 25073 106 5.3 8470 1090 710 1320 600 240 2220 1300 1470 3320 410 1500 13790 1300 M=1.2m 30 160 DN150 24900 25074 159 8025 M=1.2m 40 200 DN175 24901 25075 212 3500 20 160 DN150 05104 07130 125 6.25 10040 1090 710 1620 700 240 2220 1300 1470 3850 410 1750 16280 1550 M=1.2m 30 200 DN175 05107 07131 187 9475 M=1.2m 40 225 DN200 05110 07132 250 4000 20 160 DN150 24908 25082 144 7.21 11600 1090 710 1920 800 240 2220 1300 1470 4350 410 2000 18780 1800 M=1.2, 30 200 DN175 24909 25083 216 12375 M=1.2m 40 225 DN200 24910 25084 288 4500 20 200 DN175 24914 25088 163 8.16 13180 1090 710 2220 900 240 2220 1300 1470 4880 410 2250 21380 2075 M=1.2m 30 225 DN200 24915 25089 245 12375 M=1.2m 40 250 DN225 24916 25090 326 Diameter 2350 mm - Height of filter bed 1.2 m 3000 20 160 DN150 24917 25091 119 5.94 11130 1270 710 1020 750 240 2560 1300 1740 3350 500 1500 18300 2575 M-1.2m 30 200 DN175 24918 25092 178 9300 M-1.2m 40 225 DN200 24919 25093 238 3500 20 160 DN150 17120 22702 141 7.06 13300 1270 710 1480 770 240 2560 1300 1740 3850 500 1750 21790 3125 M=1.2m 30 200 DN175 16696 22703 212 11050 M-1.2m 40 225 DN200 17121 22704 282 4000 20 200 DN175 24926 25100 163 8.17 15470 1270 710 1920 800 240 2560 1300 1740 4380 500 2000 25280 3650 M=1.2m 30 225 DN200 24927 25101 245 12800 M=1.2m 40 250 DN225 24928 25102 327 4500 20 200 DN175 22674 22705 186 9.28 17640 1270 710 2220 900 240 2560 1300 1740 4880 500 2250 28880 4200 M=1.2m 30 225 DN200 22675 22706 279 14525 M=1.2m 40 250 DN225 22676 22707 371 5000 20 200 DN175 24935 25109 208 10.4 19800 1270 710 2520 1000 240 2560 1300 1740 5440 500 2500 32380 4750 M=1.2m 30 250 DN225 24936 25110 312 16250 M=1.2m 40 315 DN250 34937 25111 416 84 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

FILTRATION Rodas Filter 2500mm (Sand bed depth: 1.2m) Fibreglass horizontal commercial sand filters 2500 mm diameter. Maximum operating temperature 50ºC. Tested at 1.5 times maximum operating pressure. Equipped with pressure gauge panel, manual air, water purge and 400mm loading access. Internal components and pipe in PVC. Laterals 0.3 mm slots in PP. Bolts, nuts and washers in AISI- 316. EPDM seals and gaskets. Options: Options for side opening placement. Vinylester internal lining for ozone treated pools. Sightglass 135mm and 400mm side manhole. Ordering: Refer to Options Page for options codes and pricing. Warranty guide: 2 year full plus 8 year pro rate warranty on filter tank and 1 year full warranty on internal components, gauges, valve. Refer to instructions and website for full warranty details * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250 kpa (2.5 bar) - Test pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filer Ø 2.500 - length 3.500 24938 20 149 150MM P.O.A Rodas Filter Ø 2.500 - length 3.500 24939 30 223 200mm* P.O.A Rodas Filter Ø 2.500 - length 3.500 24940 40 297 200mm* P.O.A Rodas Filter Ø 2.500 - length 4.000 22677 20 172 200mm* P.O.A Rodas Filter Ø 2.500 - length 4.000 22678 30 258 200mm* P.O.A Rodas Filter Ø 2.500 - length 4.000 22679 40 345 250mm P.O.A Rodas Filter Ø 2.500 - length 4.500 24947 20 196 200mm* P.O.A Rodas Filter Ø 2.500 - length 4,500 24948 30 294 250mm P.O.A Rodas Filter Ø 2.500 - length 4.500 24949 40 392 315mm P.O.A Rodas Filter Ø 2.500 - length 5.000 22680 20 220 200mm* P.O.A Rodas Filter Ø 2.500 - length 5.000 22681 30 329 250mm P.O.A Rodas Filter Ø 2.500 - length 5.000 22682 40 439 315mm P.O.A Tanks - Maximum working pressure: 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filer Ø 2.500 - length 3.500 25112 20 149 150MM P.O.A Rodas Filter Ø 2.500 - length 3.500 25113 30 223 200mm* P.O.A Rodas Filter Ø 2.500 - length 3.500 25114 40 297 200mm* P.O.A Rodas Filter Ø 2.500 - length 4.000 22708 20 172 200mm* P.O.A Rodas Filter Ø 2.500 - length 4.000 22709 30 258 200mm* P.O.A Rodas Filter Ø 2.500 - length 4.000 22710 40 345 250mm P.O.A Rodas Filter Ø 2.500 - length 4.500 25121 20 196 200mm* P.O.A Rodas Filter Ø 2.500 - length 4,500 25122 30 294 250mm P.O.A Rodas Filter Ø 2.500 - length 4.500 25123 40 392 315mm P.O.A Rodas Filter Ø 2.500 - length 5.000 22711 20 220 200mm* P.O.A Rodas Filter Ø 2.500 - length 5.000 22712 30 329 250mm P.O.A Rodas Filter Ø 2.500 - length 5.000 22713 40 439 315mm P.O.A All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 85

FILTRATION Rodas Filters 2500mm Length Filtration Velocity (m3/h/m3) Ø N 2.5 bar 4 bar Flow m3/h Filtration area m2 Vol (l) A B C E F H I P T W Y Total Service weight kg Sand Charge Kg Diameter 2500mm - Height of filter bed 1/1.2m 1-1.2mm 0.4-0.8mm 3500 20 160 DN150 24938 25112 149 7.34 14920 1360 710 1620 770 440 2710 1300 1850 3850 500 1750 24320 3175 M=1.2m 30 200 DN175 24939 25113 223 11675 M=1.2m 40 225 DN200 24940 25114 297 4000 20 200 DN175 22677 22708 172 8.62 17380 1360 710 1920 800 440 2710 1300 1850 4380 500 2000 28250 3725 M=1.2m 30 225 DN200 22678 22709 258 13500 M=1.2m 40 250 DN225 22679 22710 345 4500 20 200 DN175 24947 25121 196 9.8 19830 1360 710 2220 900 440 2710 1300 1850 4940 500 2250 32300 4300 M=1.2m 30 250 DN225 24948 25122 294 15350 M=1.2m 40 315 DN250 24949 25123 392 5000 20 200 DN175 22680 22711 220 10.98 22300 1360 710 2520 1000 440 2710 1300 1850 5440 500 2500 36230 4850 M=1.2m 30 250 DN225 22681 22712 329 17200 M=1.2m 40 315 DN250 22682 22713 439 86 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

FILTRATION Commercial Blowers Air blowers designed to shake the filtration bed during the backwashing process or to supply air wherever required. The blower housing and the impeller are made of a light Aluminium alloy, whereas the shaft is made of S.S. on which the impeller is mounted and dynamically balanced. The 100-120/200-240 V single phase and the 200-240/280-440 V three phase motors at 50/60 Hz for non-stop operation, are manufactured according to the IEC Standards and come with an IP 54 outer protection and an F Class insulation. The pumps can be installed both horizontally and vertically, and as there is no contact between the fixed and movable blower parts, it does not require any lubrication nor maintenance, neither is there any wear and tear. Product Code Ø Filter mm Maxi Presure (mbar) Maxi flow m3/h Power kw List Price Air Blower 0.75Kw. 3 Phase 35387-190 144 0.75 $3,530.00 Air Blower 1.1Kw 1 Phase 31090-180 216 1.1 $3,530.00 Air Blower 1.75 KW 415v 3 Phase 35389 900 320 156 1.75 $5,285.00 Air Blower 2.2 KW 415v 3 Phase 31093 1050 220 312 2.2 $3,930.00 Air Blower 3.4 KW 415v 3 Phase 31094 1200 410 222 3.4 $5,970.00 Air Blower 4.0 KW 415v 3 Phase 31096 1800 380 312 4 $11,190.00 Air Blower 7.5 KW 415v 3 Phase 31098 2000 360 552 7.5 $19,000.00 Air Blower 11 KW 415v 3 Phase 33973 3000 600 552 11 P.O.A Filter Media Product Product Code For Sale only in Bag Size List Price Sand - 16/30 Grade 10150 For VIC Sales 25 kg $30.00 Sand - 16/30 Grade 10151 For NSW Sales 20 kg $25.00 Sand - 16/30 Grade 10152 For QLD Sales 20 kg $25.00 Sand - 16/30 Grade 10153 For SA Sales 25 kg $30.00 Sand - 16/30 Grade 10154 For WA Sales 25 kg $30.00 Viron Glass Media 57011 VF # 35 Super Fine 15 kg $40.00 Viron Glass Media 57013 VF # 8 Coarse 15 kg $40.00 Sand quantity less 20% = Glass quantity (by weight). Sand quantity less 25% = Zeolite quantity (by weight). All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 87

FILTRATION KIVU Filter Pumps Huge hair and lint bowl with 170mm wide and 230mm deep basket. Ramp on lid lock ring for easy removal and positive sealing. Whisper quiet operation.. True carbon face mechanical seal. Suitable for demanding applications and commercial pools and spas. Three Phase pumps designed for commercial applications. 4 pole 1450 RPM motor, 75% hydraulic efficiency, 150mm inlet and 125mm outlet connections, closed coupled independent plastic pre-filter. Standard motor shaft for compatibility with off the shelf motors, MEPS compliant, UL and GS marked, Self Priming and VSD available. Ordering: Please specify product number when ordering. Warranty guide: Limited 3 year warranty on all components. Refer to instructions and website for full warranty details Product Code List Price KIVU 7.5hp Plastic Commercial Pump with Hair and Lint Pot 6 inlet and 5 outlet 56633 $7,935.00 KIVU 10hp Plastic Commercial Pump with Hair and Lint Pot 6 inlet and 5 outlet 56635 $8,045.00 KIVU 15hp Plastic Commercial Pump with Hair and Lint Pot 6 inlet and 5 outlet 56638 $11,825.00 Variable Speed Driver to suit 7.5 hp motor 56633-8000 $2,550.00 Variable Speed Installation Kit (10m cable) 56633-8001 $310.00 Variable Speed Driver to suit 10 hp motor 56635-8000 $3,145.00 Variable Speed Driver to suit 15 hp motor 56638-8000 $3,870.00 Variable Speed Installation Kit (10m cable) 56638-8001 $420.00 88 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

FILTRATION Maxim Pump Pump body and support in heat resistant plastic. Double protected shaft S.S. AISI- 420 with double isolation and with IP-55 motor. 8 litre capacity strainer. Inlet / outlet connections 3 (80mm) solvent socket. Suction at 1.5 m height. Three-phase 415volts - 2,900rpm. Type Voltage A B C D E F G H I J 08003-0860 4.0HP 230/400 815 430 385 90 287 200 140 530 65 468 08004-0860 5.0HP 230/400 815 430 385 90 287 200 140 530 65 468 08005-0860 6.0HP 230/700 847 430 385 90 287 200 140 530 65 500 Type Voltage Standard Volume m3 08003-0860 4.0HP 230/400 0.184 H (m) 8 10 12 14 16 19.5 m3/h 56 50 42 34 23 0 08004-0860 5.0HP 230/400 0.184 H (m) 8 10 12 147 16 19.5 m3/h 74 66 57 46 30 0 08005-0860 6.0HP 230/700 847 H (m) 8 10 12 14 16 19.5 m3/g 88 78 67 53 34 0 Product Code Flow Rate @ 8m/h Full Load Amps per Phase List Price Maxim Pump - 4.0 HP 08003-0860 935 lpm 5.8 $2,980.00 Maxim Pump - 5.0 HP 08004-0860 1235 lpm 7.4 $3,060.00 Maxim Pump - 6.0 HP 08005-0860 1470 lpm 8.4 $3,145.00 4.0 HP 5.0 HP 6.0 HP Commercial Pumps AstralPool Australia supply models from the wide range of Grundfos pumps to suit commercial pool applications large and small. The Grundfos NB and NBG end suction centrifugal pumps can be matched to your project specification in many different configurations. Options are available for 2-pole and 4-pole motors, cast iron, stainless steel or bronze impellers. Base plates and strainer options can also be matched to your choice of pump. For Grundfos commercial pumps contact your local AstralPool branch with pump duty, flow and head details for a quote. All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 89

pumps BX High Performance Pumps Huge hair and lint bowl with 170mm wide and 230mm deep basket, 65mm and 50mm unions included and whisper quiet operation. Ramp on lid lock ring for easy removal and positive sealing. True carbon face mechanical seal. Suitable for demanding applications and commercial pools and spas. Three Phase pumps designed for commercial applications. Ordering: Please specify product number when ordering. Warranty guide: Limited 3 year warranty on all components. Refer to instructions and website for full warranty details 740 MAX. 3HP MODEL 384 4.0 337 215 8 Product Code Volts Phase Input Watts Full Load Amps Flow Rate @ 8 m/h Conns mm List Price BX 1.5 HP Pool & Spa Pump 11492 240 Single 1645 7.2 440 lpm 65/50 $1,220.00 BX 2.0 HP Pool & Spa Pump 11493 240 Single 2030 8.8 540 lpm 65/50 $1,370.00 BX 3.0 HP Pool & Spa Pump 11494 240 Single 2300 12.5 640 lpm 65/50 $1,605.00 BX 2.0 HP Pool & Spa Pump 3 Phase 11498 415 Three 2195 3.4 540 lpm 65/50 $1,585.00 BX 3.0 HP Pool & Spa Pump 3 Phase 11499 415 Three 2650 4.1 640 lpm 65/50 $1,605.00 BX 4.0 HP Pool & Spa Pump 3 Phase 11500 415 Three 2985 4.7 750 lpm 80 $2,290.00 10 Day Lead Time on 3 Phase Pumps 90 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

strainers Strainer in Polypropylene and Fibreglass - 33L Capacity Flanges drilled according to DIN-2501. Hoop type clamp. Drain plug. Maximum working pressure: 1.5bar. Ordering: Please specify product number when ordering. Warranty guide: Limited three (3) year warranty on all components. Refer to instructions and website for full warranty details Product Code List Price Connections 100mm - 55 m3/h 04657 $3,610.00 Connections 140mm - 90 m3/h 04659 $3,920.00 Strainer 3-37 m3/h 09643 P.O.A Strainer in Polypropylene and Fibreglass - 33L Capacity with Sightglass Flanges drilled according to DIN-2501. Hoop type clamp. Drain plug. Maximum working pressure: 1.5bar. Ordering: Please specify product number when ordering. Warranty guide: Limited three (3) year warranty on all components. Refer to instructions and website for full warranty details Product Code List Price Strainer - 33L - 80mm - 37 m3/h 15644 $3,760.00 Strainer - 33L - 100mm - 55 m3/h 15645 $3,900.00 Strainer - 33L - 125mm - 72 m3/h 15646 P.O.A Strainer - 33L - 140mm - 90 m3/h 15647 $4,200.00 Strainer - 4"" - 33L - 55 m3/h 15649 $4,645.00 Ref 15644 15645 15646 15647 15648 15649 H 635 635 635 635 635 635 D 475 475 475 475 475 475 M 353 353 353 353 353 353 Ø 90 110 125 140 3 4 E 500 516 532 546 500 516 Sightglass Cover Hoop clamp Gasket Basket 33 l (Ø 5) Drain plug Connection to pump All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 91

strainers Strainer Polypropylene and Fibreglass - 60L Capacity Flanges drilled according to DIN-2501 Standard. Hoop type clamp. Drain plug. Maximum working pressure 1.5 bar. Ordering: Please specify product number when ordering. Warranty guide: Limited three (3) year warranty on all components. Refer to instructions and website for full warranty details Product Code List Price Strainer - 60L - 150mm - 118 m3/h 108861 $5,445.00 Strainer - 60L - 225mm - 233 m3/h 10888 $6,035.00 Strainer Polypropylene and Fibreglass - 60L Capacity Sightglass Flanges drilled according to DIN-2501. Hoop type clamp. Drain plug. Maximum working pressure: 1.5bar. Ordering: Please specify product number when ordering. Warranty guide: Limited three (3) year warranty on all components. Refer to instructions and website for full warranty details Product Code List Price Strainer- 60L - 150mm- 118 m3/h 15650 $6,065.00 Strainer- 60L - 200mm- 233 m3/h 15652 $7,310.00 60 l Polyester STRAINER. Hoop clamp Cover Gasket Basket 60 l (Ø 5) Basket 60 lts. (Ø5) Connection to pump Drain plug Strainer Polypropylene and Fibreglass Flanges drilled according to DIN-2501 Standard. Supplied with 3 piece coupling at the inlet. 8 litre capacity. Inlet size: 80mm ID - Outlet size: 100 mm ID. Max Flow 88m3 / HR Ordering: Please specify product number when ordering. Warranty guide: Limited three (3) year warranty on all components. Refer to instructions and website for full warranty details Product Code List Price Strainer in polypropylene - 8L Capacity 09879-0830 $615.00 92 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

flanges Vibration Absorbent Bushing Flanges in galvanized steel. Elastic material: Polychloroprene. Maximum temperature 95ºC. Nominal pressure: 10 Kg/cm2 (PN/10). Available in PN 16 under special order. Din Flanges Ordering: Please specify product number when ordering. Warranty guide: Limited three (3) year warranty on all components. Refer to instructions and website for full warranty details Product Code List Price Antivibration flange D.80mm 20233 $196.18 Antivibration flange D.100mm 20234 $253.49 Antivibration flange D.125mm* 20235 $305.00 Antivibration flange D.150mm 20236 $465.00 Antivibration flange D.200mm 20237 P.O.A Antivibration flange D.250mm 20238 P.O.A Check Valves Nominal pressure 10 kg/cm2. Mounted between flanges. Available in PN 16 and PN 25 under special order. Cast Iron. * European Pipe Connections Product Code List Price Outlets Ø 65mm 20240 P.O.A Outlets Ø 80mm 20241 P.O.A Outlets Ø 100mm 20242 P.O.A Outlets Ø 125mm* 20243 P.O.A Outlets Ø 150mm 20244 $655.00 Outlets Ø 200mm 20245 P.O.A Outlets Ø 250mm 20246 P.O.A All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 93

Boilers / gas heaters HR Commercial Pool Heaters Commercial Pool Heater, Natural Gas or LP Gas, balanced flue for outdoor installation or inbuilt draft diverter when installed indoors, Bronze Headers, large 22.25mm internal diameter finned copper tube heat exchanger, Genus IV Thermostat, G4 compliant, High efficiency, marine grade, powder coated cabinet inside and out, Superwool refractory insulation for low residual heat. Options: Left or right hand water connections. Indoor or Outdoor LP Gas or Natural Gas Remote Thermostat Ordering: Please specify product number, indoor or outdoor, LPG or Natural Gas. Allow 25 days for manufacturing. Type B commissioning available onsite - POA Warranty guide: 12 months on parts. Refer to instructions and website for full warranty details 695 175 105 205 405 HR1800 = 2504 HR1600 = 2254 HR1400 = 2004 HR1200 = 1754 HR1000 = 1504 HR800 = 1254 HR600 = 1004 1600 GAS 880 445 663 LENGTH 175 960 Product Code - NAT Product Code - LPG MJ Input kw Output A Dim B Dim C Dim Gas Conn. Water Conn. List Price HR 600 - Outdoor Heater 10708 10708-1 595 136 1600 1004 960 25 1.5 $11,185.00 HR 800 - Outdoor Heater 10718 10718-1 790 180 1600 1254 960 40 1.5 $12,775.00 HR 1000 Outdoor Heater 10728 10728-1 990 225 1600 1504 960 40 1.5 $14,195.00 HR 1200 Outdoor Heater 10738 10738-1 1190 270 1600 1754 960 40 2 $15,600.00 HR 1400 Outdoor Heater 10748 10748-1 1390 316 1600 2004 960 40 2 $17,015.00 HR 1600 Outdoor Heater 10758 10758-1 1585 361 1600 2254 960 40 2 $18,425.00 HR 1800 Outdoor Heater 10768 10768-1 1785 406 1600 2504 960 40 2 $19,840.00 HR 600 - Indoor Heater 10709 10709-1 595 136 1600 1004 960 25 1.5 $10,880.00 HR 800 - Indoor Heater 10719 10719-1 790 180 1600 1254 960 40 1.5 $12,425.00 HR 1000 - Indoor Heater 10729 10729-1 990 225 1600 1504 960 40 1.5 $13,805.00 HR 1200 - Indoor Heater 10739 10739-1 1190 270 1600 1754 960 40 2 $15,175.00 HR 1400 - Indoor Heater 10749 10749-1 1390 316 1600 2004 960 40 2 $16,545.00 HR 1600 - Indoor Heater 10759 10759-1 1585 361 1600 2254 960 40 2 $17,925.00 HR 1800 - Indoor Heater 10769 10769-1 1785 406 1600 2504 960 40 2 $19,300.00 Pool Heater shall be a Hurlcon HR Series model HR rated at kw output and MJ input. The heat exchanger shall be of copper finned tube with one piece extruded integral fin. The tubes shall be mechanically expanded directly into bronze headers to prevent water leaks from silicone gaskets. Unit shall be standard with flow switch, run and fault contacts and pump run on timer. Burners shall be stainless steel with venturi design and mixing baffle to ensure even flame distribution along entire length of burner. Marine grade Powder coated panels shall be easily removable for servicing and burner removal. Boiler shall have integral outdoor weatherproof flue design for outdoor installation and integral draft diverter for indoor installation. Temperature control will be achieved by the integrated Genus IV thermostat which incorporates diagnostic fault display, flame roll out sensor and 45 degree over temperature high limit. 94 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

Heat pumps AstralPool Commercial Heat Pumps Heat Pump suitable for commercial pools in sizes ranging in 9 hp to 40hp Titanium heat exchanger, powder coated case. Flow rate from 250 lpm to 833 lpm. Lead time 10-14 weeks Warranty Guide: 10 years on Heat exchanger, 3 years on compressor and evaporator, 1 year on control. Refer to instructions and website for full warranty details Product Code List Price AHP100 Heat Pump - 45KW - 9HP 78500 $18,130.00 AHP130 Heat Pump - 55KW - 10HP 78501 $19,765.00 AHP200 Heat Pump - 82KW - 15HP 78502 $27,365.00 AHP250 Heat Pump - 108KW - 20HP 78503 $36,615.00 AHP400BU Heat Pump - 160KW - 30HP 78504 $45,655.00 AHP500BU Heat Pump - 210KW - 40HP 78505 $56,655.00 Product Code Output Amps COP Water Flow(min) Compressor Fans Dimensions Weight AHP100 Heat Pump 78500 45000W 15.7A 4.74 250lpm 2 2 1450x730x1060 250kg AHP130 Heat Pump 78501 55000W 18.8A 4.4 325lpm 2 2 1450x730x1280 270kg AHP200 Heat Pump 78502 82000W 29.8A 4.56 333lpm 3 3 2150x760x1330 380kg AHP250 Heat Pump 78503 108000W 37.9A 4.41 417lpm 4 3 2170x1065x1930 655kg AHP400BU Heat Pump 78504 160000W 61.0A 4.68 667lpm 3 3 2170x1065x1930 1040kg AHP500BU Heat Pump 78505 210000W 81.8A 4.54 833lpm 4 4 2850x1170x2220 1100kg All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 95

water treatment Heliox UV MP - automatic disinfection for public pools The Heliox UV MP treatment system has a number of advantages over chemical disinfection systems, since virtually UV light does not alter the physical and chemical composition of water, it is very effective against any type of organism (algae, bacteria, virus, fungi, yeasts, etc.) further minimizing the risks of handling and dosing of hazardous chemicals. Moreover, UV treatment reduces the levels of combined chlorine in the water, thereby producing significant water and energy savings by reducing the volume and frequency of pool water renewals. The Heliox UV MP treatment systems have been designed and manufactured with the latest technology in UV treatment of water, thus ensuring continuous operation and minimal maintenance. The proposed control architecture for HELIOX UV MP system has a number of features that allow the highest levels of reliability, efficiency and scalability. Because the systems incorporate calibrated radiation and flow sensors, continuous adjustment of the lamp power is allowed, thus optimizing energy consumption and lifetime. Calibrated sensors do not require any user action on them. HELIOX UV MP systems manage two parameters when setting the lamp power, radiation measured by the sensor and flow. Thus, the system sets a nominal radiation for each model, which is determined by the maximum treatment flow to ensure a dose of 60 mj/cm2. If the flow to be treated is less than the nominal one, so too will be the radiation needed, so the system will decrease the output power, optimizing the energy consumption and increasing lamp life. Like the current UV systems, whether radiation decreases due to loss of efficiency of the lamp, turbidity, etc., the system will adjust the lamp power to ensure the nominal dose. The lamp power system is based on an electronic ballast which allows continuous operation with high efficiency (greater than 95%). Contact your AstralPool representative for further details and pricing. Salt Electrolysis for public pools Our wide range of industrial electrolysis systems covers self-cleaning equipment of up to 500 grams/hour of Chlorine, which makes it possible to use saline electrolysis to treat the water at any public use facility. Our Basic range incorporates EX electrodes which provide the highest durability in selfcleaning systems. The Plus range incorporates a control and automatic dosing equipment for ORP (Redox) and PH which allows for better management of the equipment and provides an excellent water quality at all times. The Plus Plus range incorporates a Chlorine and ph value control and regulation system. Main advantages: Safety: There is no need to store, handle or dose any chemical products and therefore it is a much safer system. The raw material stored is common salt. Savings: The introduction of saline electrolysis systems can bring net savings in operating costs of around 50-60%, with respect to traditional systems. Peristaltic pump not included. Contact your AstralPool representative for further details and pricing. 96 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

Pool return inlets Concrete Pool Inlets Adjustable floor inlet with swivel join body in PVC. Regulating screw in POM. Max. flow rate: 14m3/h. To be fixed on 65 mm diameter pipe and wall conduit 23665. Product Code List Price Adjustable floor inlet - swivel joint 22353 $37.02 Pool Inlets Product Code List Price Return inlet multiflow (2 male thread) - Concrete 00295 $22.18 Floor Return Inlet 2 Thread - Vinyl or Concrete 00340 $63.64 Wall Return Inlet - Fibreglass - 90mm 41518 $93.73 concrete Wall Return Inlet - 90mm 41520 $54.38 Wall Return Inlet - Skypool - 90mm 41521 $93.73 Reducing Conduit Reducing conduit 50mm OD x 65mm ID Product Code List Price Reducing cond 50mm OD x 65mm ID 23665 $84.47 Overflow Outlet For Skypool PVC body, PA flange and Stainless Steel screw. Product Code List Price Overflow Outlet 90mm Skypool 41519 $155.40 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 97

ladders & RAILS Access Ladders Standard ladder with handrails with deluxe non slip step. Rails & steps made from 316 Stainless Steel. Ordering: Please specify product number when ordering. Warranty guide: 12 months. Refer to instructions and website for full warranty details Product Code List Price 2 steps ladder deluxe 05476 $845.00 3 steps ladder deluxe 05477 $960.00 4 steps ladder deluxe 05478 $1,065.00 Exit grab rail inc fixing plate 05541 $980.00 Reinforced anchoring in Stainless steel x 2 (include gaskets, 07331 $184.05 screws and rawl plugs) Ladder anchoring sockets 00042 P.O.A Anchor with locking bolts (2 units) 00143 $425.00 Anchoring estutcheon cover 05547 $15.10 Access Ladders for Disabled Persons 500mm Width For easy entry and exit into exercise of hydrotherapy pools for people not requiring an hydraulic lift chair. Available as 970 mm width model. Please refer to your sales office. Max load 170kg. Ordering: Please specify product number. Warranty guide: 12 months. Refer to instructions and website for full warranty details Product Code List Price Access ladder for disabled persons 4 steps 00116 $3,930.00 Access ladder for disabled persons 5 steps 00117 $4,635.00 Access ladder for disabled persons 6 steps 00118 $5,130.00 Access ladder for disabled persons 7 steps 00119 $6,065.00 Anchor Kit - Pool Ladder (Pair) 07331 $184.05 Escutcheon Anchor Cover (1 unit) 05547 $15.10 Step kit for transforming a ladder from width 500 to 970mm To convert ladder from 500 mm to 970 mm. One Step Kit will be necessary for each of the steps of the ladder. In polished AISI 316 stainless steel, with plastic step with non-slip surface. Ordering: Please specify product number. Warranty guide: 12 months. Refer to instructions and website for full warranty details Product Code List Price Step Kit 28615 $935.00 98 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

accessories Waterlift Made of Stainless Steel AISI-316 and injected plastic parts. It helps users to access the pool. With the Waterlift, going in and out has never been so easy. Comfort and quality added to your pool. Very easy to use and maintain. Automatic lifting device, driven by a 24 V CC single phase motor reducer. IP-67 isolation for all the electrical and electronic components. The different components are controlled by an electronic plate. The system is operated by two push-button (up and down) placed on the rail. Ergonomic and functional design. Product Code List Price Waterlift 32409 $34,735.00 550 1078 923 1426 800 550 180 943 Hydraulic Chair Lift Hydraulic chair lift. Frame made mainly in stainless steel AISI-316 with a central hydraulic mechanism and seat, provided with also a ladder for the assistant. For correct hydraulic operation a minimum 3.5Kg/cm2 water supply pressure is required. For minimum water depth 1.6m Ordering: The external fixings are 2 metal anchoring fixtures (supplied with the unit) and the 2 internal fixings are adjustable which allows the height to be altered for different types of swimming pool surround. For pool depths less than 1.4 m please inquire. Special order by quotation Product Code List Price Select rails, add cylinder and add components Rails L-650 28619 $3,320.00 Rails L-1000 28620 $3,330.00 Cylinder 28621 $5,315.00 Components 28622 $6,740.00 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 99

END PIECE COMMERCIAL POOLS grating General Note for all Grating s Made of stabilised Polypropylene against U.V. rays. Standard white colour. Please enquire for other colours. These are supplied as modules of gratings for straight or curved runs (outer radius of 1 or 2 metres). The gratings click together with a male-female pressure fit permitting a certain amount of flexibility in assembly which absorbs any expansion which may occur when the tiles are exposed to heat fluctuations. For all types of gratings it is necessary to construct the channel 5 mm wider than the grating itself, to allow for ease of removal and for expansion. Channel width Grating width Channel width 200...195 250...245 300...295 350...345 mm Grating tile 2,5 mm Height of grating (h) varies according to model. Longitudinal model h = 24 mm Transversal model h = 22 mm and h = 35 mm LONGITUDINAL MODEL 0% water INLET Code 00302 The longitudinal design of the tiles ensures that any excess water from the pool is not allowed to overflow onto the pool deck, maintaining the area dry. 100% water END PIECE STRAIGHT TILE CURVED TILE STRAIGHT TILE CURVED TILE L L1 h A r.1m. r.2m. 05581 200 195 24 206 - - 05582 250 245 24 206 - - 05583 300 295 24 206 - - 05584 350 345 24 206 - - r.1m. r.2m. 08001 05585 200 195 24-11 15 6 07565 05586 250 245 24-11 15 6 08002 300 295 24-11 15 6 07566 350 345 24-11 15 6 06420 200 195 24 - - - 06421 250 245 24 - - - 06422 300 295 24 - - - 06423 350 345 24 - - - 100 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

grating Parallel Grating Title Made in PP, stabilised against UV rays. For clicking together same types of male-female gratings (5 units = 1.024 m) Their flexibility enables obtaining a curve with a minimum radius of 5 m. Product Code List Price Height 24mm, Width 195mm 05581 $20.61 Height 24mm, Width 245mm 05582 $21.35 Height 24mm, width 295mm 05583 $22.41 Height 24mm, Width 345mm 05584 $23.60 End Piece for Parallel Title To finish, end tiles, should cutting be necessary. Made in Polypropylene. Product Code List Price Height 24mm, Width 195mm 06420 $5.87 Height 24mm, Width 245mm 06421 $5.98 Height 24mm, width 295mm 06422 $6.11 Height 24mm, Width 345mm 06423 $6.36 End Piece kit for parallel grating AISI-304, made of PP with stabilisers to protect from UV rays. Made to adapt on the last piece of each longitude in case it must be cut. Product Code List Price Height 24mm, Width 245mm A16065 $113.52 Height 24mm, width 295mm A16066 $121.23 Height 24mm, Width 345mm A16067 $126.74 Grating support profile S.S. corner support section Grating end piece All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 101

grating Grating Support Profile Suitable for 22, 24 and 35 mm high grating. Made in plastic. Supplied in 2 m lengths. Inside measurement 24 mm x 37 mm. Product Code List Price Suitable for 22, 24 and 35mm 00224 $25.45 Supplied in 2 meter lengths Modular transversal grating for curves Made in PP, stabilised against UV rays. United by modular fitting (45 units per m.) Product Code List Price Modular Grating for Curves Height 22mm, Width 195mm 11107 $2.40 Height 22mm, Width 245mm 11108 $2.98 Height 22mm, Width 295mm 19202 $3.11 Height 22mm, Width 335mm 19203 $3.96 Modular Grating for Curves - different grip pattern on each side Height 35mm, Width 195mm 00220 $2.98 Height 35mm, Width 245mm 00221 $2.98 Height 35mm, Width 295mm 00222 $3.11 Height 35mm, Width 335mm 00223 $3.96 Code H Channel Width (L) Grating Width (L) 11107 22 200 195 11108 22 250 245 19202 22 300 295 19203 22 340 335 00220 35 200 195 00221 35 250 245 00222 35 300 295 00223 35 340 335 Measurements in mm 102 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

grating Modular Transversal Grating for Curves Made of PP stabilised against UV rays. Assembled together by modular fitting. According to EN13451-1 standard (8mm). Available in 5 colours. Other grating colours can be supplied on request. For further information, please contact your AstralPool distributor. Colour minimum order is 3150 pieces or 60 meters 53 PIECES PER METER Product Code Standard Packaging Standard Weight kg List Price Modular Grating for Curves Height 22mm, Width 195mm 34190 470 14.1 P.O.A Height 22mm, Width 245mm 34191 320 12. $2.26 Height 22mm, Width 295mm 34192 300 15.0 $2.40 Height 22mm, Width 335mm 34193 250 15.0 P.O.A Modular Grating for Curves - different grip pattern on each side Height 35mm, Width 195mm 34194 450 16.0 P.O.A Height 35mm, Width 245mm 34195 300 13.7 $2.40 Height 35mm, Width 295mm 34196 290 17.3 $2.33 Height 35mm, Width 335mm 34197 250 17.4 P.O.A Dark brown RAL 8002 AstralPool blue RAL 5003 Ivory RAL 1015 Liner blue RAL 5024 Colour Code White - Black Grey RAL 1015 CL90 RAL 8002 CL109 RAL 5003 CL 60 Measurements in mm RAL 5024 CL108 Code H Channel Width (L) Grating Width (L1) R r Standard white 34190 22 200 195 645 450 34191 22 250 245 825 580 34192 22 300 295 1055 760 34193 22 340 335 1155 820 34194 35 200 195 645 450 34195 35 250 245 825 580 34196 35 300 295 1055 760 34197 35 340 335 1155 820 Transversal Grating Made in PP, stabilised against UV rays. Assembled together by a cable (49 units per metre). Product Code Stainless Steel Cable must be installed Channel Width (L) Grating Tile (L1) H List Price Height 22mm, Width 195mm 00212 200 195 22 $ 2.16 Height 22mm, Width 245mm 00213 250 245 22 $2.88 Stainless Steel AISI-316 Cable 00215 $4.35 (Meters) Locking Pin for Cable in Brass 00216 $3.36 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 103

grating 90 Corner tiles for overflow channels Made of injected white Polypropylene. Measurements in mm Product Code A H L P List Price Height 22mm, Width 195mm 22379 245 22 195 127 $83.31 Height 22mm, Width 245mm 22380 295 22 245 127 $104.14 Height 22mm, Width 295mm 22381 345 22 295 127 $126.74 Height 22mm, Width 335mm 22382 385 22 335 127 $137.77 Height 35mm, Width 195mm 22383 245 35 195 127 $89.10 Height 35mm, Width 245mm 22384 295 35 245 127 $108.77 Height 35mm, Width 295mm 22385 345 35 295 127 $137.77 Height 35mm, Width 335mm 22386 385 35 335 127 P.O.A Stainless Steel Longitudinal Grating and Stainless Steel 90 Corner Longitudinal overflow grating, made in Stainless Steel. It is necessary to construct the channel 5mm wider than the grille itself, to allow for easy assembly. It is made up of straight sections of AISI-304 Stainless Steel, 500 mm in length. Straight sections can be made-to-measure in order to fit the length of the swimming pool. The 90º corner is made of Stainless Steel and is the perfect complement to the Stainless Steel longitudinal grating. Metal with non-slip surface. 4 models with different sizes according to the width of grating used. Product Code List Price Stainless Steel longitudinal grille 195mm x 500mm 32415 $365.00 Stainless Steel longitudinal grille 245mm x 500mm 32416 $415.00 Stainless Steel longitudinal grille 295mm x 500mm 32417 $465.00 Stainless Steel longitudinal grille 345mm x 500mm 32418 $485.00 Stainless Steel 90 corner 195mm 32729 $450.00 Stainless Steel 90 corner 245mm 32730 $485.00 Stainless Steel 90 corner 295mm 32731 $505.00 Stainless Steel 90 corner 345mm 32732 P.O.A Grating Code Corner Code L1 L2 32415 32729 195 200 32416 32730 245 250 32417 32731 295 300 32418 32732 345 350 104 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

pressure fittings PVC 90 Elbow - Solvent x Solvent Product Code Pipe Size (DN) List Price 15mm 90 Elbow 07137 15mm $1.01 20mm 90 Elbow 07138 20mm $1.29 25mm 90 Elbow 07139 25mm $1.92 32mm 90 Elbow 07140 32mm $2.72 40mm 90 Elbow 07141 40mm $4.08 50mm 90 Elbow 07142 50mm $6.19 65mm 90 Elbow 01718 65mm $10.79 80mm 90 Elbow 07144 80mm $19.14 100mm 90 Elbow 07145 100mm $28.98 150mm 90 Elbow 01723 150mm $102.98 175mm 90 Elbow 01724 175mm P.O.A 200mm 90 Elbow 01725 200mm $230.35 200mm 90 Elbow 01726 250mm $540.00 300mm 90 Elbow 01727 300mm $960.00 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 105

pressure fittings 90 Corner tiles for overflow channels Product Code Pipe Size (DN) List Price 15mm 45 Elbow 07152 15mm $1.42 20mm 45 Elbow 07153 20mm $1.82 25mm 45 Elbow 07154 25mm $2.44 32mm 45 Elbow 07155 32mm $3.29 40mm 45 Elbow 07156 40mm $4.49 50mm 45 Elbow 07157 50mm $6.50 65mm 45 Elbow 01752 65mm $12.03 80mm 45 Elbow 07159 80mm $18.72 100mm 45 Elbow 07160 100mm $9.89 150mm 45 Elbow 01757 150mm $91.41 175mm 45 Elbow 01758 175mm P.O.A 200mm 45 Elbow 01759 200mm $207.21 225mm 45 Elbow 01760 225mm $450.00 300mm 45 Elbow 01761 300mm $845.00 PVC 90 Tee - Solvent x Solvent Product Code Pipe Size (DN) List Price 15mm 90 Tee 07167 15mm $1.28 20mm 90 Tee 07168 20mm $1.68 25mm 90 Tee 07169 25mm $2.38 32mm 90 Tee 07170 32mm $3.88 40mm 90 Tee 07171 40mm $5.62 50mm 90 Tee 07172 50mm $7.96 65mm 90 Tee 01786 65mm $15.72 80mm 90 Tee 07174 80mm $31.24 100mm 90 Tee 07175 100mm $45.12 150mm 90 Tee 01791 150mm $126.74 175mm 90 Tee 01792 175mm P.O.A 200mm 90 Tee 01793 200mm $288.76 225mm 90 Tee 01794 225mm $625.00 300mm 90 Tee 01795 300mm $1,130.00 106 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

pressure fittings PVC Coupling - Solvent x Solvent Product Code Pipe Size (DN) List Price 15mm Coupling 07182 15mm $1.28 20mm Coupling 07183 20mm $1.68 25mm Coupling 07184 25mm $2.38 32mm Coupling 07185 32mm $3.88 40mm Coupling 07186 40mm $5.62 50mm Coupling 07187 50mm $7.96 65mm Coupling 01878 65mm $9.15 80mm Coupling 07189 80mm $31.24 100mm Coupling 07190 100mm $36.61 150mm Coupling 01883 150mm $63.64 175mm Coupling 01884 175mm P.O.A 200mm Coupling 01885 200mm $149.89 225mm Coupling 01886 225mm $305.00 300mm Coupling 01887 300mm $425.00 PVC Coupling - Solvent x BSPF Threaded Product Code Pipe Size (DN) List Price 15mm Coupling - BSPF 07191 15mm x 1/2 $2.15 20mm Coupling - BSPF 07192 20mm x 3/4 $2.44 25mm Coupling - BSPF 07193 25mm x 1 $2.70 32mm Coupling - BSPF 07194 32mm x 1-1/4 $3.57 40mm Coupling - BSPF 07195 40mm x 1-1/2 $4.61 50mm Coupling - BSPF 07196 50mm x 2 $6.58 PVC Adaptor - Metric x BS Product Code Pipe Size (DN) List Price 50mm (euro) x 1-1/2 Adaptor 07233 D50mm x 1-1/2 $2.91 63mm (euro) x 2 Adaptor 07234 D63mm x 2 $4.30 90mm (euro) x 3 Adaptor 07236 D90mm x 3 $21.15 110mm (euro) x 4 Adaptor 07237 D110mm x 4 $23.73 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 107

pressure fittings PVC Reducers Product Code Pipe Size (DN) List Price Dn - Normal Bore of Pipe 20mm x 15mm Reducer 07198 20mm x 15mm $0.87 25mm x 20mm Reducer 07199 25mm x 20mm $0.94 25mm x 15mm Reducer 07200 25mm x 15mm $1.28 32mm x 25mm Reducer 07201 32mm x 25mm $1.44 32mm x 20mm Reducer 07202 32mm x 20mm $1.88 40mm x 32mm Reducer 07203 40mm x 32mm $1.88 40mm x 25mm Reducer 07204 40mm x 25mm $2.44 50mm x 40mm Reducer 07205 50mm x 40mm $2.50 65mm x 50mm Reducer 07206 65mm x 50mm $4.23 80mm x 65mm Reducer 07207 80mm x 65mm $6.92 100mm x 80mm Reducer 07208 100mm x 80mm $13.35 150mm x 125mm Reducer 01933 150mmx 125mm $54.38 200mm x 175mm Reducer 01936 200mm x 175mm $65.94 200mm x 150mm Reducer 01937 200mm x 150mm $80.99 225mm x 200mm Reducer 01938 225mm x 200mm $116.82 300mm x 225mm Reducer 01940 300mm x 225mm $570.00 300mm x 200mm Reducer 01941 300mm x 200mm $355.00 PVC Conical Reducers Product Code Pipe Size (DN) List Price D225-200mm x 160mm C Reducer 02012 D225-200mm x 160mm $91.41 D250-225mm x 160mm C Reducer 02016 D250-225mm x 160mm $126.74 PVC Stub Flanges Product Code Pipe Size (DN) List Price 50mm Stub Flange 07804 50mm $5.62 65mm Stub Flange 02022 65mm $7.31 80mm Stub Flange 07218 80mm $11.56 100mm Stub Flange 07219 100mm $14.49 140mm Stub Flange 02026 125mm $26.60 150mm Stub Flange 02027 150mm $35.86 175mm Stub Flange 02028 175mm P.O.A 200mm Stub Flange 02029 200mm $77.52 225mm Stub Flange 02030 225mm $173.04 300mm Stub Flange 02031 300mm $265.61 108 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

pressure fittings PVC Backing Rings Product Code Pipe Size (DN) List Price 50mm Backing Rings 02033 50mm $10.56 65mm Backing Rings 02034 65mm $13.72 80mm Backing Rings 02035 80mm $14.59 100mm Backing Rings 02036 100mm $19.87 140mm Backing Rings 02038 125mm $33.54 150mm Backing Rings 02040 150mm $39.32 175mm Backing Rings 02041 175mm P.O.A 200mm Backing Rings 02042 200mm $54.38 225mm Backing Rings 02043 225mm $149.89 300mm Backing Rings 02044 300mm $230.35 Flat Gaskets Product Code Pipe Size (DN) List Price DN - Normal Bore of Pipe 50mm Flat Gasket 02062 50mm $2.63 65mm Flat Gasket 02063 65mm $2.88 80mm Flat Gasket 02064 80mm $3.11 100mm Flat Gasket 02065 100mm $3.98 140mm Flat Gasket 02067 140mm $5.26 150mm Flat Gasket 02068 150mm $5.88 175mm Flat Gasket 02069 175mm P.O.A 200mm Flat Gasket 02070 200mm $16.12 225mm Flat Gasket 02071 225mm $25.45 PVC Cap Product Code Pipe Size (DN) List Price DN - Normal Bore of Pipe 15mm Cap 07209 15mm $0.91 20mm Cap 07210 20mm $1.06 25mm Cap 07211 25mm $1.45 32mm Cap 07212 32mm $2.26 40mm Cap 07213 40mm $3.29 50mm Cap 07214 50mm $4.56 65mm Cap 01949 65mm $8.22 100mm Cap 07803 100mm $3.97 150mm Cap 01954 150mm $80.99 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 109

pressure fittings PVC Adaptor - Solvent x BSPM Threaded Product Code Pipe Size (DN) List Price 15-10mm x 1/2 Adaptor 07238 15-10mm x 1/2 $1.35 20-15mm x 3/4 Adaptor 07239 20-15mm x 3/4 $1.59 25-20mm x 1 Adaptor 07240 25-20mm x 1 $1.82 32-25mm x 1 1/4 Adaptor 07241 32-25mm x 1 1/4 $2.47 40-32mm x 1 1/2 Adaptor 07242 40-32mm x 1 1/2 $3.15 50-40mm x 2 Adaptor 07243 50-40mm x 2 $5.17 PVC Adaptor Bush - Solvent x BSP Threaded Product Code Pipe Size (DN) List Price 15mm x 1/2 Bush 07246 15mm x 1/2 $1.55 20mm x 3/4 Bush 07247 20mm x 3/4 $1.76 25mm x 1 Bush 07248 25mm x 1 $2.10 32mm x 1 1/4 Bush 07249 32mm x 1 1/4 $2.74 40mm x 1 1/2 Bush 07250 40mm x 1 1/2 $3.29 50mm x 2 Bush 07251 50mm x 2 $5.13 65mm x 2 1/2 Bush 02108 65mm x 2 1/2 $9.11 80mm x 3 Bush 07253 80mm x 3 $19.30 PVC Nipples - BSPM Threaded x BSPM Threaded Product Code Pipe Size (DN) List Price 1/2 Nipple 02112 1/2 $1.72 3/4 Nipple 02113 3/4 $2.05 1 Nipple 02114 1 $2.46 1 1/4 Nipple 02115 1 1/4 $3.04 1 1/2 Nipple 02116 1 1/2 $4.01 2 Nipple 02117 2 $5.09 110 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

pressure fittings Spigots - Solvent Product Code Pipe Size (DN) List Price 20mm x 20mm Spigot 02202 20mm x 20mm $1.57 25mm x 25mm Spigot 02203 25mm x 25mm $1.94 Spigots - Solvent x BSPM Product Code Pipe Size (DN) List Price 1/2 x 20mm 02219 1/2 x 20mm $1.57 3/4 x 25mm 02220 3/4 x 25mm $1.91 1 x 30mm 02221 1 x 30mm $2.63 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 111

pressure fittings Unions - Solvent Product Code Pipe Size (DN) List Price 15mm Union 07332 15mm $3.88 20mm Union 07333 20mm $4.49 25mm Union 07334 25mm $6.36 32mm Union 07335 32mm $7.58 40mm Union 07336 40mm $9.44 50mm Union 07337 50mm $13.75 65mm Union 02333 65mm $38.17 80mm Union 07806 80mm $39.32 Unions - BSPF Product Code Pipe Size (DN) List Price 1/2 Threaded Union 02345 1/2 $5.45 3/4 Threaded Union 02346 3/4 $6.44 1 Threaded Union 02347 1 $8.55 1 1/4 Threaded Union 02348 1 1/4 $10.81 1 1/2 Threaded Union 02349 1 1/2 $12.71 2 Threaded Union 02350 2 $18.46 Unions - BSP x Female Solvent Socket Product Code Pipe Size (DN) List Price 40mm x 1 1/2 Threaded Union 07262 40mm x 1 1/2 $9.76 50mm x 2 Threaded Union 07263 50mm x 2 $15.80 65mm x 2 1/2 Threaded Union 02359 65mm x 2 1/2 $52.07 80mm x 3 Threaded Union 07814 80mm x 3 $63.64 Inline Sight Glass - Female Solvent Sockets Product Code Pipe Size (DN) List Price 40mm Sight Glass 21082 40mm P.O.A 50mm Sight Glass 21083 50mm $42.80 65mm Sight Glass 02389 65mm $105.29 80mm Sight Glass 21084 80mm $132.25 100mm Sight Glass 21085 100mm $160.91 150 mm Sight Glass 02394 150 mm $355.00 200 mm Sight Glass 02396 200 mm $505.00 1 1/2 Sight Glass 02397 1 1/2 $37.02 112 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

PVC VALVES Standard Ball Valves - PE - EPDM - Solvent Socket Product Code Pipe Size (DN) List Price 15mm Ball Valve 07266 15mm $19.55 20mm Ball Valve 07267 20mm $21.48 25mm Ball Valve 07268 25mm $28.92 32mm Ball Valve 07269 32mm $33.54 40mm Ball Valve 07270 40mm $45.12 50mm Ball Valve 07271 50mm $61.32 65mm Ball Valve 02459 65mm $184.05 80mm Ball Valve 07273 80mm $265.61 100mm (ND80mm) Ball Valve 07274 100mm (ND80mm) $288.76 100mm Ball Valve 27251 100mm P.O.A Standard Ball Valves - PE EPDM - BSPF Thread Product Code Pipe Size (DN) List Price 1/2 Ball Valve 02462 1/2 $20.60 3/4 Ball Valve 02463 3/4 $22.69 1 Ball Valve 02464 1 $31.24 1 1/4 Ball Valve 02465 1 1/4 $35.86 1 1/2 Ball Valve 02466 1 1/2 $47.43 2 Ball Valve 02467 2 $64.80 2 1/2 Ball Valve 02468 2 1/2 P.O.A 3 Ball Valve 02469 3 $276.63 4 (ND 3 ) Ball Valve 05354 4 (ND 3 ) P.O.A 4 Ball Valve 22798 4 $485.00 Standard Ball Valves - Teflon - EPDM - Solvent Sockets Product Code Pipe Size (DN) List Price 15mm Ball Valve 07276 15mm $21.60 20mm Ball Valve 07277 20mm $25.45 25mm Ball Valve 07278 25mm $34.70 32mm Ball Valve 07279 32mm P.O.A 40mm Ball Valve 07280 40mm $54.38 50mm Ball Valve 07281 50mm $71.73 65mm Ball Valve 02476 65mm $196.18 80mm Ball Valve 07283 80mm $288.76 100mm (ND80mm) Ball Valve 07284 100mm (ND80mm) P.O.A 100mm Ball Valve 27252 100mm P.O.A All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 113

pressure fittings Standard Ball Valves - Teflon - EPDM - BSPF Thread Product Code Pipe Size (DN) List Price 1/2 Ball Valve 02478 1/2 P.O.A. 3/4 Ball Valve 02479 3/4 P.O.A. 1 Ball Valve 02480 1 P.O.A 1 1/4 Ball Valve 02481 1 1/4 P.O.A 1 1/2 Ball Valve 02482 1 1/2 P.O.A 2 Ball Valve 02483 2 $77.52 2 1/2 Ball Valve 02484 2 1/2 P.O.A 3 Ball Valve 02485 3 P.O.A 4 (ND 3 ) Ball Valve 05358 4 (ND 3 ) P.O.A 4 Ball Valve 22066 4 P.O.A Standard Ball Valves - Teflon - Viton - Solvent Socket Product Code Pipe Size (DN) List Price 15mm Ball Valve 21087 15mm P.O.A 20mm Ball Valve 21088 20mm $45.12 25mm Ball Valve 21089 25mm $59.00 32mm Ball Valve 21090 32mm P.O.A. 40mm Ball Valve 21091 40mm $97.20 50mm Ball Valve 21092 50mm $213.35 65mm Ball Valve 02492 65mm P.O.A. 80mm Ball Valve 21093 80mm P.O.A. 100mm (ND80mm) Ball Valve 21094 100mm (ND80mm) P.O.A. 100mm Ball Valve 27253 100mm P.O.A. Standard Ball Valves - Teflon - Viton - BSPF Thread Product Code Pipe Size (DN) List Price 1/2 Ball Valve 02494 1/2 P.O.A. 3/4 Ball Valve 02495 3/4 P.O.A. 1 Ball Valve 02496 1 $61.32 1 1/4 Ball Valve 02497 1 1/4 P.O.A. 1 1/2 Ball Valve 02498 1 1/2 P.O.A. 2 Ball Valve 02499 2 $214.43 2 1/2 Ball Valve 02468 2 1/2 P.O.A 3 Ball Valve 02500 3 P.O.A. 4 (ND 3 ) Ball Valve 05362 4 (ND 3 ) P.O.A. 4 Ball Valve 26443 4 P.O.A. 114 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

PVC VALVES Industrial Ball Valves - Teflon - EPDM - Solvent Socket Product Code Pipe Size (DN) List Price 15mm Ball Valve 18494 15mm $33.54 20mm Ball Valve 18495 20mm $39.32 25mm Ball Valve 18496 25mm $46.27 32mm Ball Valve 18497 32mm $63.64 40mm Ball Valve 18498 40mm $75.21 50mm Ball Valve 18499 50mm $97.20 65mm Ball Valve 18441 65mm P.O.A. 80mm Ball Valve 18500 80mm $320.00 100mm Ball Valve 27249 100mm P.O.A. Industrial Ball Valves - Teflon - EPDM - BSPF Thread Product Code Pipe Size (DN) List Price 1/2 Ball Valve 18454 1/2 $34.70 3/4 Ball Valve 18455 3/4 $40.48 1 Ball Valve 18456 1 $49.75 1 1/4 Ball Valve 18457 1 1/4 P.O.A 1 1/2 Ball Valve 18458 1 1/2 P.O.A 2 Ball Valve 18459 2 $102.98 2 1/2 Ball Valve 18460 2 1/2 P.O.A 3 Ball Valve 18461 3 P.O.A 4 Ball Valve 22800 4 P.O.A Industrial Ball Valves - Teflon - Viton - Solvent Socket Product Code Pipe Size (DN) List Price 15mm Ball Valve 21096 15mm P.O.A 20mm Ball Valve 21097 20mm $59.00 25mm Ball Valve 21098 25mm $71.73 32mm Ball Valve 21099 32mm $92.57 40mm Ball Valve 21100 40mm $117.93 50mm Ball Valve 21101 50mm $149.89 65mm Ball Valve 18450 65mm $299.79 80mm Ball Valve 21102 80mm $365.00 100mm Ball Valve 27250 100mm $635.00 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 115

pvc valves Industrial Ball Valves - Teflon - Viton - BSPF Thread Product Code Pipe Size (DN) List Price 1/2 Ball Valve 18464 1/2 P.O.A 3/4 Ball Valve 18465 3/4 $60.16 1 Ball Valve 18466 1 $74.05 1 1/4 Ball Valve 18467 1 1/4 $94.89 1 1/2 Ball Valve 18468 1 1/2 $121.23 2 Ball Valve 18469 2 P.O.A 2 1/2 Ball Valve 18470 2 1/2 P.O.A 3 Ball Valve 18471 3 P.O.A 4 Ball Valve 22802 4 P.O.A CPVC Industrial Ball Valves - Teflon - EPDM - BSPF Thread Product Code Pipe Size (DN) List Price 1/2 Ball Valve 22815 1/2 P.O.A. 3/4 Ball Valve 22816 3/4 P.O.A. 1 Ball Valve 22817 1 P.O.A. 1 1/4 Ball Valve 22818 1 1/4 P.O.A. 1 1/2 Ball Valve 22819 1 1/2 P.O.A 2 Ball Valve 22820 2 $160.91 2 1/2 Ball Valve 22821 2 1/2 P.O.A. 3 Ball Valve 22822 3 P.O.A. 4 Ball Valve 26445 4 P.O.A. CPVC Industrial Ball Valves - Teflon - Viton - BSPF Thread Product Code Pipe Size (DN) List Price 1/2 Ball Valve 22835 1/2 P.O.A 3/4 Ball Valve 22836 3/4 P.O.A 1 Ball Valve 22837 1 P.O.A 1 1/4 Ball Valve 22838 1 1/4 P.O.A 1 1/2 Ball Valve 22839 1 1/2 P.O.A 2 Ball Valve 22840 2 P.O.A 2 1/2 Ball Valve 22841 2 1/2 P.O.A 3 Ball Valve 22842 3 P.O.A 4 Ball Valve 26447 4 P.O.A 116 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

pvc & Check valves Uniblock Ball Valves Product Code Pipe Size (DN) List Price 3/4 Uniblock Ball Valve 22792 3/4 $24.83 1 Uniblock Ball Valve 22793 1 $31.61 Spring Check Valves - EPDM - Solvent Socket Product Code Pipe Size (DN) List Price 15mm Spring Check Valve 09110 15mm $21.34 20mm Spring Check Valve 09111 20mm $24.29 25mm Spring Check Valve 09112 25mm $26.60 32mm Spring Check Valve 09113 32mm $32.40 40mm Spring Check Valve 09114 40mm $43.96 50mm Spring Check Valve 09115 50mm $61.32 65mm Spring Check Valve 09017 65mm $126.74 80mm Spring Check Valve 09117 80mm $173.04 100mm (ND 80mm) Spring Check Valve 09118 100mm (ND 80mm) $184.05 Spring Check Valves - EPDM - BSPF Thread Product Code Pipe Size (DN) List Price 1/2 Spring Check Valve 09021 1/2 P.O.A 3/4 Spring Check Valve 09022 3/4 $26.60 1 Spring Check Valve 09023 1 $30.08 1 1/4 Spring Check Valve 09024 1 1/4 $37.02 1 1/2 Spring Check Valve 09025 1 1/2 $47.43 2 Spring Check Valve 09026 2 $67.10 2 1/2 Spring Check Valve 09027 2 1/2 $149.89 3 Spring Check Valve 09028 3 $196.18 4 (DN 3 ) Spring Check Valve 09029 4 (DN 3 ) $219.33 Foot Valves - EPDM - Solvent Socket Product Code Pipe Size (DN) List Price 15mm Foot Valve 09100 15mm P.O.A 20mm Foot Valve 09101 20mm $27.76 25mm Foot Valve 09102 25mm P.O.A 32mm Foot Valve 09103 32mm P.O.A 40mm Foot Valve 09104 40mm P.O.A 50mm Foot Valve 09105 50mm $63.64 65mm Foot Valve 08997 65mm $137.77 80mm Foot Valve 09107 80mm $184.05 100mm (ND 80mm) Foot Valve 09108 100mm (ND 80mm) $196.18 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 117

pvc & Check valves Ball Check Valves - EPDM - Solvent Socket Product Code Pipe Size (DN) List Price 15mm Ball Check Valves 33010 15mm $23.63 20mm Ball Check Valves 33011 20mm $27.76 25mm Ball Check Valves 33012 25mm $45.12 32mm Ball Check Valves 33013 32mm $50.91 40mm Ball Check Valves 33014 40mm $67.10 50mm Ball Check Valves 33015 50mm $96.04 Ball Check Valves - Viton - Solvent Socket Product Code Pipe Size (DN) List Price 15mm Ball Check Valve 33016 15mm $43.96 20mm Ball Check Valve 33017 20mm $47.43 25mm Ball Check Valve 33018 25mm $65.94 32mm Ball Check Valve 33019 32mm $82.15 40mm Ball Check Valve 33020 40mm $117.93 50mm Ball Check Valve 33021 50mm $149.89 Wafer Check Valves - EPDM - O ring Seal - No gasket required Product Code Pipe Size (DN) List Price 65mm Swing Check Valve 08984 65mm $55.54 80mm Swing Check Valve 08985 80mm $64.80 100mm Swing Check Valve 08986 100mm $77.52 150mm Swing Check Valve 08988 150mm $110.20 200mm Swing Check Valve 08989 200mm $160.91 Butterfly Valves - EPDM - Zinc Plated Shaft - Classic Product Code Pipe Size (DN) List Price 50-65mm (2-2 1/2 ) Butterfly Valve 02581 50-65mm (2-2 1/2 ) $184.05 80mm (3 ) Butterfly Valve 02582 80mm (3 ) $219.33 100mm (4 ) Butterfly Valve 02583 100mm (4 ) $242.47 125mm (5 ) Butterfly Valve 02585 125mm (5 ) $276.63 150mm (6 ) Butterfly Valve 02586 150mm (6 ) $330.00 200mm (8 ) Butterfly Valve 02587 200mm (8 ) $495.00 250mm (10 ) Butterfly Valve 15846 250mm (10 ) $1,055.00 118 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

pvc valves Butterfly Valves - EPDM - Stainless Steel Shaft - Classic Product Code Pipe Size (DN) List Price 50-65mm (2-2 1/2 ) Butterfly Valve 16707 50-65mm (2-2 1/2 ) $242.47 80mm (3 ) Butterfly Valve 16708 80mm (3 ) $276.63 100mm (4 ) Butterfly Valve 16709 100mm (4 ) $320.00 125-140mm (5 ) Butterfly Valve 16710 125-140mm (5 ) $425.00 150mm (6 ) Butterfly Valve 16711 150mm (6 ) $450.00 200mm (8 ) Butterfly Valve 16712 200mm (8 ) $705.00 280-250mm (10 ) Butterfly Valve 22425 225mm (10 ) $1,190.00 Butterfly Valves - Viton - Stainless Steel Shaft - Classic Product code Pipe Size (DN) List Price DN = normal Bore of Pipe 50-65mm (2-2 1/2 ) Butterfly Valve 16713 50-65mm (2-2 1/2 ) P.O.A 80mm (3 ) Butterfly Valve 16714 80mm (3 ) $420.00 100mm (4 ) Butterfly Valve 16715 100mm (4 ) $545.00 125-140mm (5 ) Butterfly Valve 16716 125-140mm (5 ) P.O.A 150mm (6 ) Butterfly Valve 16717 150mm (6 ) $1,075.00 200-225mm (8 ) Butterfly Valve 16718 200-225mm (8 ) P.O.A 250mm (10 ) Butterfly Valve 22426 250mm (10 ) $1,730.00 Butterfly Valves - EPDM - Stainless Steel Shaft - Industrial Product code Pipe Size (DN) List Price DN = normal Bore of Pipe 63-75mm Butterfly Valve 32620 62-75mm P.O.A. 90mm Butterfly Valve 32621 90mm P.O.A. 110mm Butterfly Valve 32622 110mm P.O.A. 125-140mm Butterfly Valve 32623 125-140mm P.O.A. 160mm Butterfly Valve 32624 150mm P.O.A. 200-225mm Butterfly Valve 32625 200-225mm P.O.A Butterfly Valves - EPDM - Stainless Steel Shaft - with Gear Box - Industrial Product code Pipe Size (DN) List Price DN = normal Bore of Pipe 63-75mm Butterfly Valve 34466 62-75mm P.O.A. 90mm Butterfly Valve 34467 90mm P.O.A. 110mm Butterfly Valve 34468 110mm P.O.A. 125-140mm Butterfly Valve 34469 125-140mm P.O.A. 160mm Butterfly Valve 34470 150mm $875.00 200-225mm Butterfly Valve 34471 200-225mm $1,260.00 250-280mm Butterfly Valve 34472 250-280mm $3,180.00 315mm Butterfly Valve 32738 315mm $5,930.00 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016. 119

pvc Pipes PVC Pipes Sold in 6 meter lengths Product Code List Price per meter PVC PIPE 40MM PN9 U-PVC-WHITE 16040 $12.26 PVC PIPE 50MM PN9 U-PVC-WHITE 16041 $18.75 PVC PIPE 80MM PN9 U-PVC-WHITE 26000 $54.54 PVC PIPE 100MM PN9 U-PVC-WHITE 26001 $66.38 PVC PIPE 150MM PN9 U-PVC-WHITE 26003 $66.97 PVC PIPE 200MM PN9 U-PVC-WHITE 26005 $146.58 PVC PIPE 20MM PN12 U-PVC* 16042 $9.19 PVC PIPE 40MM PN12 U-PVC WHITE 16038 $17.74 PVC PIPE 50MM PN12 U-PVC WHITE 16039 $24.38 PVC PIPE 65MM PN12 U-PVC WHITE 16090 $63.14 PVC PIPE 80MM PN12 U-PVC - WHITE* 16085 $80.37 PVC PIPE 100MM PN12 U-PVC-WHITE* 26002 $82.86 PVC PIPE 125MM PN12 U-PVC - WHITE 26010 $72.30 PVC PIPE 150MM PN12 U-PVC-WHITE 26004 $286.41 PVC PIPE 200MM PN12 U-PVC-WHITE 26006 $180.75 PVC PIPE 225MM PN12 U-PVC-WHITE 26007 $249.08 PVC PIPE 250MM PN12 U-PVC-WHITE 26008 $310.00 PVC PIPE 300MM PN12 U-PVC-WHITE 26009 $395.00 PVC Solvent Cement for Pipes 100mm and over Product Code List Price LARGE BORE PRESSURE CEMENT 4L 16193 $410.00 LARGE BORE PRIMING FLUID PURPLE 4L 16194 $225.94 120 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

ASTRALPOOL AUSTRALIA PTY LTD TERMS AND CONDITIONS OF TRADE 1. Definitions In these terms: ACL means the Australian Consumer Law Schedule of the Competition and Consumer Act; Agreement means any agreement for the provision of goods or services by the Supplier to the Customer; consumer is as defined in the ACL and in determining if the Customer is a consumer, the determination is made if the Customer is a consumer under the Agreement; Customer means the person, jointly and severally if more than one, acquiring goods or services from the Supplier; Goods means goods supplied by the Supplier to the Customer; GST means the goods and Services tax as defined in A New Tax System (goods and Services Tax) Act 1999 as amended; PPSA means the Personal Property Securities Act 2009 (Cth). Retailer means any person or organization to whom a Customer supplies goods or services supplied to it by the Supplier that is not an end-user consumer of the goods or services. Supplier means AstralPool Australia Pty Ltd (ABN 97 007 284 504); Supplier s Intellectual Property includes any and all intellectual and industrial property rights throughout the world owned by the Supplier or any of its Related Bodies Corporate, whether subsisting now or in the future, including (a) rights of any kind in inventions, discoveries and novel designs, (b) literary works, and any other works or subject matter in which copyright (including future copyright and rights in the nature of or analogous to copyright) may, or may in the future, subsist, including photographic images of the goods, (c) confidential information, trade secrets and know-how, (d) registered and unregistered trade marks and service marks (including logos), and (e) internet domain names. Related Bodies Corporate has the meaning provided in the Corporations Act 2001 (Cth); Services means services supplied by the Supplier to the Customer; and Terms means these Terms and Conditions of Trade. 2. Basis of Agreement 2.1 Unless otherwise agreed by the Supplier in writing, the Terms apply exclusively to every Agreement and cannot be varied or replaced by any other terms, including the Customer s terms and conditions of purchase (if any). 2.2 Any quotation provided by the Supplier to the Customer for the proposed supply of goods or services is: (a) valid for 30 days; (b) an invitation to treat only; and (c) only valid if in writing. 2.3 The Terms may include additional terms in the Supplier s quotation, which are not inconsistent with the Terms. 2.4 An Agreement is accepted by the Supplier when the Supplier accepts, in writing or electronic means, an offer from the Customer or provides the Customer with the goods or services. 2.5 The Supplier in its absolute discretion may, for any reason, refuse to accept any offer or order for goods and services by the Customer, including (without limitation), for a breach, or suspected breach of the Customer of any of the Terms. 2.6 The Customer must provide the Supplier with its specific requirements, if any, in relation to the goods and services. 2.7 The Customer must not offer the goods for sale over the Internet or directly though its website without express prior written consent from the Supplier. 2.8 The Customer must not, without the prior written consent of the Supplier, use any of the Supplier Intellectual Property. If Supplier does provide written consent to the Supplier to use any of the Supplier Intellectual Property, this consent may be granted subject to whatever restrictions, limitations and guidelines imposes by the Supplier from time to time (including without limitation, the Supplier s Product and Brand Advertising Guide), and consent may be withdrawn by the Supplier at any time at its absolute discretion.. 2.9 The Customer acknowledges that included in the Supplier s goods are a number of goods of a highly technical nature, and the Customer warrants that it has the requisite knowledge and skill regarding their correct application, installation and operation. The Customer agrees to ensure the correct application, installation and operation of the goods for any of its customers, and to provide all necessary technical advice and information to prevent damage to the goods.: 2.10 The Supplier may vary or amend these Terms by written notice to the Customer at any time. Any variations or amendments will apply to orders placed after the notice date. 3. Pricing 3.1 Prices quoted for the supply of goods and services exclude GST and any other taxes or duties imposed on or in relation to the goods and services. 3.2 If the Customer requests any variation to the Agreement, the Supplier may increase the price to account for the variation. 3.3 Where there is any change in the costs incurred by the Supplier in relation to goods or services, the Supplier may vary its price for the goods or services to take account of any such change at any time without prior notice to the Customer. 4. Payment 4.1 Unless otherwise agreed in writing: (a) Subject to 4.1(b), payment for the goods or services must be made in full within 30 days from end of month of the Supplier s invoice. (b) The Supplier reserves the right to require payment in full on delivery of the goods or completion of the services. 4.2 Payment by cheque is not deemed made until the proceeds of the cheque have cleared. 4.3 Payment terms may be revoked or amended at the Supplier s sole discretion immediately upon giving the Customer written notice. 5. Payment Default 5.1 If the Customer defaults in payment by the due date of any amount payable to the Supplier, then all money which would become payable by the Customer to the Supplier at a later date on any account, becomes immediately due and payable without the requirement of any notice to the Customer, and the Supplier may, without prejudice to any of its other accrued or contingent rights: (a) charge the Customer interest on any sum due at the prevailing rate pursuant to the Penalty Interest Rates Act 1983 (Vic) plus 4 per cent for the period from the due date until the date of payment in full; (b) charge the Customer for, and the Customer must indemnify the Supplier from, all costs and expenses (including without limitation all legal costs and expenses) incurred by it resulting from the default or in taking action to enforce compliance with the Agreement or to recover any goods; (c) cease or suspend supply of any further goods or services to the Customer; (d) by written notice to the Customer, terminate any uncompleted contract with the Customer. 6. Passing of Property 6.1 Until the Supplier receives full payment in cleared funds for all goods and services supplied by it to the Customer, as well as all other amounts owing to the Supplier by the Customer: (a) title and property in all goods remain vested in the Supplier and do not pass to the Customer; (b) the Customer must keep the goods separate from its goods and maintain the Supplier s labelling and packaging; (c) the Supplier may without notice, enter any premises where it suspects the goods are and remove them, notwithstanding that they may have been attached to other goods not the property of the Supplier, and for this purpose the Customer irrevocably licences the Supplier to enter such premises and also indemnifies

the Supplier from and against all costs, claims, demands or actions by any party arising from such action. 6.2 Without limiting clause 6.1, all payments received from the Customer must be applied in accordance with section 14(6)(c) of the PPSA. The Customer agrees that legal title and property in the goods is retained by the Supplier until payment is received in cleared funds from the Customer of all sums owing to the Supplier, whether under this Agreement or otherwise. The Customer must keep the goods separate from other goods and store the goods so that they are readily identifiable as those supplied by the Supplier. The Customer must not sell the goods except in the ordinary course of the Customer s business. If the Customer fails to pay by the due date any amount owing to the Supplier, the Supplier may (without prejudice to any of its other rights) recover and resell any of the goods in which property has not passed to the Customer. In addition to any rights the Supplier may have under Chapter 4 of the PPSA, the Supplier may, without notice, enter any premises where it expects the goods may be located and remove them without committing a trespass, and the Customer authorises the Supplier to enter onto the premises where the goods are kept to take possession of the goods for that purpose at any time. The Customer also indemnifies the Supplier from and against all loss suffered and or incurred by the Supplier as a result of exercising its rights under this clause 6.2. If there is any inconsistency between the Supplier s rights under this clause 6.2 and its rights under Chapter 4 of the PPSA, this clause 6.2 prevails. The Customer acknowledges and warrants that the Supplier has a security interest (for the purposes of the PPSA) in the goods and any proceeds until title passes to the Customer in accordance with this clause 6.2. The Customer must do anything reasonably required by the Supplier to enable the Supplier to register its security interest with the priority the Supplier requires and to maintain that registration. The security interest arising under this clause 6.2 attaches to the goods when the Customer obtains possession of the goods and the parties confirm that they have not agreed that any security interest arising under this clause attaches at any later time. If Chapter 4 of the PPSA would otherwise apply to the enforcement of the security interest created under this Agreement, the Customer agrees that the following provisions of the PPSA will not apply; section 95 (notice of removal of accession) to the extent that it requires the Supplier to give a notice to the Customer; section 121(4) (enforcement of liquid assets notice to grantor); section 130 (notice of disposal), to the extent that it requires the Supplier to give a notice to the Customer; paragraph 132(3)(d) contents of statement of account after disposal); subsection 132(4) (statement of account if no disposal); section 135 (notice of retention); section 142 (redemption of collateral); section 143 (reinstatement of security agreement). The Supplier does not need to give the Customer any notice under the PPSA (including a notice of verification statement) unless the notice is required by the PPSA and that requirement cannot be excluded. 7. Risk and Insurance 7.1 The risk in the goods and all insurance responsibility for theft, damage, loss or otherwise will pass to the Customer immediately on the goods being delivered to the Customer or taken from the Supplier s premises. 7.2 The goods are sold to the Customer on the basis that the Customer has obtained all necessary licenses or permits under all relevant laws and regulations in relation to the goods. 8. Performance of Agreement 8.1 Any period or date for delivery of goods or provision of services stated by the Supplier is an estimate only and not a contractual commitment. 8.2 The Supplier will use its reasonable endeavours to meet any estimated dates for delivery of the goods but will not be liable for any loss or damage suffered by the Customer or any third party for failure to meet any estimated date. 8.3 If the Supplier cannot complete the services by any estimated date, it will complete the services within a reasonable time. 9. Delivery 9.1 Subject to clause 9.6, the Supplier will arrange for the delivery of the goods to the Customer. 9.2 The Customer will be responsible for all costs associated with delivery, including freight, insurance and other charges arising from the point of dispatch of the goods to the Customer at the point of delivery. 9.3 The Customer authorises the Supplier to subcontract delivery of goods or services in its absolute discretion. 9.4 The Supplier may make part delivery of goods or provision of services and the Supplier may invoice the Customer for the goods or services provided.. 9.5 The Customer indemnifies the Supplier against any loss or damage suffered by the Supplier, its sub-contractors or employees as a result of delivery, except where the Customer is a consumer and the Supplier has not used due care and skill. 9.6 If agreed the Customer may collect the goods directly from the Supplier. 10. Liability 10.1 If the Customer supplies goods or services to Retailers, it will ensure that the Retailers will comply with the Terms, and will be remain responsible for all acts, omissions, defaults and neglects of any Retailer as if they were the Customer s acts, omissions, defaults or neglects. The Customer will indemnify and hold harmless the Supplier against all loss, liability, damages, costs and all expenses, including legal fees, arising directly or indirectly out of a failure by a Retailer to whom it supplies goods or services to comply with the Terms. 10.2 Except as the Terms specifically state, or as contained in any warranty statement provided in relation to the goods or services, the Agreement does not include by implication any other term, condition or warranty in respect of the quality, merchantability, acceptability, fitness for purpose, condition, description, assembly, manufacture, design or performance of the goods or services or any contractual remedy for their failure. 10.3 If the Customer is a consumer nothing in these Terms restricts, limits or modifies the Customer s rights or remedies against the Supplier for failure of a statutory guarantee under the ACL. 10.4 If the Customer on-supplies the goods to a person who is a consumer: (a) if the goods or services are not of a kind ordinarily acquired for personal, domestic or household use or consumption, then the amount specified in section 276A(1) of the ACL is the absolute limit of the Supplier s liability to the Customer; (b) otherwise, payment of any amount required under section 274 of the ACL is the absolute limit of the Supplier s liability to the Customer; howsoever arising under or in connection with the sale, installation, use of, storage or any other dealings with the goods or services by the Customer or any third party. 10.5 If clause 10.2 and 10.3 do not apply, then other than as stated in the Terms or any written warranty statement the Customer assumes all risk and liability for loss, damage or injury to persons or to property of the Customer, or third parties arising out of the use, installation or possession of any of the goods sold by the Supplier, whether direct, indirect or consequential,unless recoverable from the Supplier on the failure of any statutory guarantee under {D1527500:1}Form 44-0607 the ACL. 10.6 The Customer acknowledges that it has the sole responsibility of satisfying itself that the goods or services are suitable for the use of the Customer. 11. Cancellation 11.1 If the Supplier is unable to deliver or provide the goods or services, then it may cancel the Customer s order (even if it has been accepted) by written notice to the Customer. 11.2 No purported cancellation or suspension of an order or any part of it by the Customer is binding on the Supplier once the order has been accepted. 11.3 If the Customer purports to cancel an order and the Supplier agrees to the cancellation, any deposit paid by the customer will be forfeited. 12. Returns and Exchanges 12.1 Subject to clause 12.2 and 12.6, the Supplier will not be liable for any shortages, damage or non-compliance with the specifications in the Agreement unless the Customer notifies the Supplier with full details and description within 10 days of delivery otherwise the Customer is deemed to have accepted the goods. 12.2 When any shortages, claim for damaged goods or noncompliance with the Agreement specifications is accepted by the Supplier, the Supplier may, at its option, replace the goods, or refund

the price of the goods. 12.3 Subject to clause 12.6, the Supplier will not under any circumstances accept goods for return that: (a) have been specifically produced, purchased or otherwise acquired to fulfill the Agreement; (b) are discontinued goods or no longer stocked by the Supplier; (c) have been altered in any way; (d) have been used; or (e) are not in their original condition and packaging. 12.4 If the Supplier accepts goods for return for reason other than a failure of the statutory guarantees under the ACL, the Customer will receive a credit for the returned goods equal to the price charged by the Supplier less a 15% deduction for handling and restocking charges. 12.5 The Customer must; (a) obtain the Supplier s prior written approval for return of goods; and (b) pay all freight charges and costs associated with return of goods unless recoverable from the Supplier on the failure of any statutory guarantee under the ACL. 12.6 If the Customer is a consumer, nothing in this clause 12 limits any remedy available for a failure of the guarantees in sections 56 and 57 of the ACL. 13. Customer Restructure 13.1 The Customer must notify the Supplier in writing of any change in its structure or management including any change in director, shareholder or management or change in partnership or trustee within 7 days of the date of any such change. 14. Force Majeure 14.1 The Supplier is not liable in any way howsoever arising under the Agreement to the extent that it is prevented from acting by events beyond its reasonable control including, without limitation, industrial disputes, strikes, lockouts, accident, breakdown, import or export restrictions, acts of God, acts or threats of terrorism, or war. If an event of force majeure occurs, the Supplier may suspend or terminate the Agreement by written notice to the Customer. 15. Miscellaneous 15.1 The law of Victoria from time to time governs the Terms. The parties agree to the non-exclusive jurisdiction of the courts of Victoria, the Federal Court of Australia, and of courts entitled to hear appeals from those Courts. 15.2 The Supplier s failure to enforce any of these Terms shall not be construed as a waiver of any of the Supplier s rights. 15.3 Nothing in the Terms is to be interpreted as excluding, restricting or modifying or having the effect of excluding, restricting or modifying the application of any State or Federal legislation applicable to the sale of goods or supply of services which cannot be excluded, restricted or modified 15.4 If any Term is unenforceable it shall be read down to be enforceable or, if it cannot be read down, the term shall be severed from the Terms without affecting the enforceability of the remaining terms. 15.5 The Customer must comply with the Privacy Act 1988 (Cth), the Australian Privacy Principles and any other relevant privacy laws in connection with any personal information supplied to it or provided to the Supplier in connection with this Agreement. Product specifications and dimensions are subject to change without notice.

HEAD OFFICE 111 Indian Drive Keysborough, VIC 3173 sales@astralpool.com.au P: 03 9554 2200 F: 03 9554 2270 Melbourne 39-45 Cyber Loop Dandenong, VIC 3175 melbourne@astralpool.com.au P: 03 8796 8650 F: 03 8796 8670 Townsville 17 Auscan Crescent Garbutt, QLD 4814 townsville@astralpool.com.au P: 07 4796 0150 F: 07 4796 0170 Sydney - SEVEN HILLS 2/2 Welder Road Seven Hills NSW 2147 sydney@astralpool.com.au P: 02 9853 2150 F: 02 9853 2170 SYDNEY - MOOREBANK 6/30 Heathcote Road Moorebank, NSW 2170 moorebank@astralpool.com.au P: 02 8778 9550 F: 02 8778 9570 Adelaide 20 Marlow Street, Keswick, SA 5035 adelaide@astralpool.com.au P: 08 8152 7650 F: 08 8152 7670 Brisbane 12 Breene Place, Morningside, QLD 4170 brisbane@astralpool.com.au P: 07 3906 5450 F: 07 3906 5470 Perth 17 Tacoma Circuit Canning Vale, WA 6155 perth@astralpool.com.au P: 08 9360 3350 F: 08 9360 3370 Gold COAst 1/28 Export Drive Molendinar, QLD 4214 goldcoast@astralpool.com.au P: 07 5552 2650 F: 07 5552 2670 www.astralpool.com.au Prices effective September 2016