Linear LED T8 Lamp Direct Replacement LED T8 F32T8/8xx/LED/22W/IS Series 5 Year Warranty!
Why Linear LED? Energy Efficient Reduced Maintenance Sustainable Very efficient converting electric power to light output Energy savings compared to T12 systems Lower energy usage reduces energy costs Longer rated life over incandescent, HID, and fluorescent lighting systems Longer rated life means lower maintenance costs of lamp change outs Better environmental choice High quality lighting gives design flexibility Can be used with lighting controls without compromising lamp life
LEDT8 Features Does not require electrical re-wiring to install For use with Electronic Instant Start Ballasts Automatically adjusts to the corresponding Ballast Factor 19w (Low Ballast Factor) 22w (Standard Ballast Factor) 26w (High Ballast Factor) Environmentally friendly no mercury, no UV or infrared light Low lumen depreciation maintains brightness over its 50,000 hour rated life Minimum heat emission, reducing load on building cooling systems No flickers ETL tested to comply with OSHA safety standards DesignLights Consortium Listed Product (4100K & 5000K lamps). Visit designlights.org to view the Qualified Products List
...Another important consideration when replacing linear fluorescent lamps with LED products is electrical safety. Nearly all LED replacements bypass the existing ballast. Most have their drive electronics integrated in the tube HOWARD LEDT8 USES THE EXISTING INSTANT START BALLAST HOWARD LEDT8 DOES NOT while some are provided with external drivers that replace the existing fluorescent ballast. HOWARD LEDT8 DOES NOT Bypassing the existing ballast results in line voltage being delivered to the sockets ( tombstones ) in the fluorescent fixture, creating a hazard if a fluorescent lamp is later re-installed in that same fixture. If a fixture is modified such that it can no longer accept its original lamp, it must have a label affixed (provided by the LED replacement manufacturer) clearly indicating this condition. HOWARD LEDT8 DOES NOT HOWARD LEDT8 DOES NOT, NO LABEL IS NEEDED SOURCE DEPARTMENT OF ENERGY: http://apps1.eere.energy.gov/buildings/publications/pdfs/ssl/led-t8-fluorescent-replacement.pdf
4 T8 Lamp Change out with Present Bulb Wattage LED Bulb Wattage Wattage Saved LED Bulb Life Energy Saved New LED T8 Lamp 29.5 watts (F32T8 Lamp) 22 watts (using Standard Ballast Factor Ballast) 7.5 watts 50,000 hours 375,000 watts over lamp life To convert to Kilowatt Hours Divide by 1000 Energy Saved 375 KwH Using Normal Power Factor Instant Start Multi-volt Ballast KwH Rate $0.12 $0.10 $0.08 Amount saved per lamp $45.00 $37.50 $30.00
Energy and Cost Savings Compared to T8 System Existing System New System System descriptions (optional) 4 Lamp F32T8 Linear Fluorescent Fixture 4 Lamp LED System Linear Fluorescent Fixture Hours burned per year 4368 Number of Fixtures 1 Number of Fixtures 1 Cost per kwh $ 0.12 Watts per Fixture (exiting system) 110 Watts per Fixture (new system) 88 Energy Cost Estimation Energy used per yr. (existing system) $57.65 Energy used per yr. (new system) $46 Energy savings per year (each new system fixture) $11.65 20% Energy Saved!
Ideal for a wide range of applications Manufacturing facilities Schools Food Processing Office Buildings Dusty applications Other applications Re-lamping to comply with DOE energy efficiency standards Hallways, Stairwells and other areas needing more directional light and 24/7 operation
LEDT8 Series Specifications Ballast Factor (BF)* Low (78%) Standard (88%) High (110%) Power Consumption (P) 19 watts 22 watts 26 watts Luminous Flux (F) 1,900 lumens 2,200 lumens 2,600 lumens Luminous Efficacy** Input Voltage 100 lm/w 110-277v (Instant Start Electronic Ballast only) Power Factor 0.90 Color Temperature Color Rendering Index Rated Life 80+ CRI 3500K, 4100K, or 5000K 50,000 hours * The LED26T8 Lamp self-adjusts light output that matches the corresponding ballast factor of the supply (or control) ballast. The new system matched light output will meet or exceed that of the one it is replacing. **Efficiency measured using 4100K with clear lens.
Ordering Information 799385-62007 F32T8/835/LED/22W/IS 799385-62008 F32T8/841/LED/22W/IS* 799385-62009 F32T8/850/LED/22W/IS* 4ft. Linear T8 LED Lamp, 80+CRI, 3500K 4ft. Linear T8 LED Lamp, 80+CRI, 4100K 4ft. Linear T8 LED Lamp, 80+CRI, 5000K *