Brochure. Light fittings, floodlights and beacons New LED range for hazardous areas

Transcription

1 Brochure Light fittings, floodlights and beacons New LED range for hazardous areas

2 2 ABB DTS - New LED range for hazardous areas LIT-140GB-LED

3 Introduction LED: Save time, money and energy ABB DTS new LED lighting solutions covers all zones of potential explosion and gas atmospheres in a wide variety of industries such as: Oil & Gas, Food and Beverage, Chemical & Pharmaceutical. Find out how our new LED lighting range can provide you with the highest level of safety and security, long life, low running costs and reduced maintenance. Whether your goal is reducing power consumption, labor-saving installation, maintenance-friendly construction, long life, high Color Rendering Index (CRI) or all of these objectives we understand your unique lighting challenges and deliver adequate LED solutions for your application. Upgrade to LED lighting and discover the benefits. LED Beacon LED Floodlight LED Tubular LED Linear LED Weatherproof Tubular LED Emergency ABB DTS - New LED range for hazardous areas LIT-140GB-LED 3

4 New LED range for hazardous areas Experience the difference Longer life, greater efficiency means optimized maintenance in hazardous locations Total cost reduction When it comes to a Total Cost of Ownership (TCO) approach, the direct and indirect benefits of LED lighting are significant: Longer lifespan: over hours at 25 C Energy efficiency: High light yield - 98% for LED vs. 52% for fluorescent Over 84 lm/w - depend on fixture Money saving: 50% energy saving means lower utility costs Reduced maintenance Using LED lighting technology allows longer lifetime, which means fewer replacement parts and low maintenance for long periods of time. This can be a significant advantage when it comes to specific areas where access is difficult or where maintenance costs are high. No effect on frequent switching Frequent switch cycles can cause early failure. Compared to fluorescent lamps degrading faster the more often they are switched on and off, there is no negative effect on LED lifetime, which means fewer maintenance operations, and more specifically on relamping. High shock vibration resistance Unlike fluorescent lights, our new LED light fittings have no filament, and therefore can withstand extreme vibrations and shocks, which makes them the ideal solution for hazardous applications. 4 ABB DTS - New LED range for hazardous areas LIT-140GB-LED

5 Benefits of using LED ENERGY EFFICIENT COST EFFECTIVE Over 100,000 hours Photometric data improved Switching to LED saves up to 50% energy on costs on lighting Reduced lamp replacements LED RESISTANCE No effect on switch cycles Longer life expectancy on light switch cycles and vibration ABB DTS - New LED range for hazardous areas LIT-140GB-LED 5

6 New LED range for hazardous areas Reliability and security improved Higher luminance levels, durability and performance to minimize safety risks in harsh environments Safety in the installation and use Our new LED light fittings are suitable for the most extreme harsh and hazardous locations: Operating temperature: -20 C to +55 C T6 Indoor or outdoor usage: fully resistant against dirt, water and moisture Zones 1, 2, 21, 22, IP66 Compliant with ATEX, IECEx, INMETRO, EAC Ex, PCEC 6 ABB DTS - New LED range for hazardous areas LIT-140GB-LED

7 Maintenance and health risks at the minimum Durable products, like LED products, not only reduce maintenance costs but also health risks for the maintenance staff and building/plant occupants. The key to minimizing accidents is to ensure an adequate level of illumination to guarantee safety in the workplace, and it is even more the case when referring to hazardous and harsh environments. LED lighting technology is a very attractive alternative to traditional light sources ensuring the highest level of performance and reliability: Better light perception and visibility: - Improved brightness and Color Rendering Index (CRI) - Bright 4000 K color temperature (concerns our tubular/linear fittings) Instant start with no flicker or buzz for a safe and ready to use operation area No UV or IR radiations ABB DTS - New LED range for hazardous areas LIT-140GB-LED 7

8 New LED range for hazardous areas Going smart for the future LED, a constantly improving technology to meet your needs and respectful to the environment LED technology for a greener tomorrow While environmental legislations are becoming more demanding, respect to the environment is one of our commitments, including helping our customers to reduce their carbon footprint. Introducing LED in our new lighting offer is a sustainable alternative to traditional lighting, which in addition does not contain neither mercury nor any other toxic materials, and therefore does not generate any hazardous waste. 8 ABB DTS - New LED range for hazardous areas LIT-140GB-LED

9 Adjust your needs to a changing future. Convert from fluorescent to LED as simply as sliding a gear tray Upgrade your traditional installation to a new energy efficient and long lasting solution by replacing your fluorescent fixture with a LED module without any specific tool. Replacement is just straight-forward and very easy. LED, the new lighting solution for the next coming years Not exaggerated to say that the future belongs to LED in terms of lighting. The efficacy of LED has speadily increased since its introduction as a source for general ilumination. This trend is expected to continue, thanks to new materials, better manufacturing and enhanced light/optics design by our R&D department.. Open to new changes? With one single gear tray, the upgrade for LED to LED improved can also be considered for future relamping projects: our products are tailored to meet your needs and expectations. ABB DTS - New LED range for hazardous areas LIT-140GB-LED 9

10 LED product overview XFFL Range Certification: II 2 GD, Ex d IIC T6 Gb, Ex tb IIIC T80 C Db IP66, -20 C to +55 C Zones: 1, 2, 21 & 22 Light Ratings: 12.6W, 25W, 31W, 19W, 56W, 71W Rated Voltages: Vac 50/60Hz Operating life above 100,000 h (according to ambient temperature) High lumen output - 5,000 lumens with 100% yield (according to item) LED module with diffuser EVNL Range Certification: II 3 GD, Ex na IIC T4 Gc, Ex tc IIIC T85 C Dc IP66, -40 C to +60 C Zones: 2 & 22 Light Ratings: 12.6W, 25W, 31W, 19W, 56W, 71W Rated Voltages: Vac 50/60Hz Operating life above 100,000 h (according to ambient temperature) High lumen output - 5,000 lumens with 100% yield (according to item) LED module with diffuser FFL Range - Industrial applications Certification: IP66, -20 C to +55 C Light Ratings: 12.6W, 25W, 31W, 19W, 56W, 71W Rated Voltages: Vac 50/60Hz Operating life above 100,000 h (according to ambient temperature) High lumen output - 5,000 lumens with 100% yield (according to item) LED module with diffuser EVDL Range Certification: II 2 D, Ex tb IIIC T85 C Db IP66, -40 C to +60 C Zones: 21 & 22 Light Ratings: 12.6W, 25W, 31W, 19W, 56W, 71W Rated Voltages: Vac 50/60Hz Operating life above 100,000 h (according to ambient temperature) High lumen output - 5,000 lumens with 100% yield (according to item) LED module with diffuser XEL Range - Self-contained or slave Certification: II 2 GD, Ex d or de IIC T6 Gb, Ex tb IIIC T80 C Db IP66, -20 C to +55 C Zones: 1, 2, 21 & 22 Light Ratings: 4W - 100/300lm Rated Voltages: Vac 50/60Hz Emergency battery duration 1h or 3h Permanent or non permanent fitting Slave version with LBS, FLX or LTC modules XLF Range Certification: Ex II 2 GD, Ex de IIB T5 to T6 Gb, Ex tb IIIC T100 C to T85 C Db IP66, -20 C to +55 C Zones: 1, 2, 21 & 22 Light Ratings: LED 110W Rated Voltages: Vac 50/60Hz Operating life > h (according to ambient temperature) More than 7800 lumens output with narrow & wide beam EVTL Range - Industrial applications Certification: IP 66, -20 C to +55 C Light Ratings: 12.6W, 25W, 31W, 19W, 56W, 71W Rated Voltages: Vac 50/60Hz Operating life above 100,000 h (according to ambient temperature) High lumen output - 5,000 lumens with 100% yield (according to item) LED module with diffuser XFB / XFL Range - Beacon & warning light Certification: II 3 GD, Ex na IIC T5 Gc, Ex tc IIIC T100 C Dc IP66, -20 C to 60 C Zones: 2 & 22 Light Ratings: Halogen 28W / LED 6W / 30 Joules Rated voltages: Halogen 230Vac/Vdc 50/60Hz / LED Vac 50/60Hz / Xenon Flash 230Vac 50/60Hz Including accessories (cable gland, plug & lamp installed) 10 ABB DTS - New LED range for hazardous areas LIT-140GB-LED

11 ABB DTS - New LED range for hazardous areas LIT-140GB-LED 11

12 Contact us new.abb.com/low-voltage/hazardous Note: We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB AG does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents in whole or in parts is forbidden without prior written consent of ABB AG. Copyright 2016 ABB All rights reserved Copyright ABB. LIT-140GB-LED 01/2016 YouTube