Technical Specifications RFQ-HTOC-77684-14-19553(GM) HOUSING FURNITURE for delivery DAP GONAIVES, HAITI Items list: Item Number Code Equipment Tender Quantity 1 E-21.01.00 Beds, Double 2 2 E-21.02.00 Beds, Single 1 3 E-52.01.00 Chair, housing 16 4 E-21.10.00 Cupboard, clothes 18 5 E-21.11.00 Desk, housing 8 6 E-52.04.00 Refrigerator, Small, housing 2 7 E-52.05.00 Fridge, with freezer, housing 2 8 E-52.06.00 Gas stove, Large 1 9 E-52.07.00 Gas stove, Small 3 10 E-21.12.00 Mirror 16 11 E-21.15.00 Seats, Row, Waiting Area, 3 Places 60 12 E-52.08.00 Table, Bedside, housing 18 13 E-52.09.00 Table, Large with 4 chairs, housing 6 NB: The pictures are just indicative and not representative of the referred item.
Line Item #1 / E-21.01.00: Bed, Double Standard double bed for housing, with mattress Characteristics 1) steel epoxy coated main structure 2) sturdy mattress support Additional consumables and accessories TO BE included in the bid price: 3) mattress at least 150 mm thickness, high density foam 4) removable and washable protective hard cotton mattress cover 5) pillow high density foam (qty of 2) 6) removable and washable protective hard cotton pillow cover (qty of 2) Minimum Dimensions 7) 1350 x 1900 mm (WxL)
Line Item #2 / E-21.02.00: Bed, Single Standard bed for housing, with mattress Characteristics 1) steel epoxy coated main structure 2) sturdy mattress support Additional consumables and accessories TO BE included in the bid price: 3) mattress at least 150 mm thickness, high density foam 4) removable and washable protective hard cotton mattress cover 5) pillow high density foam (qty 1) 6) removable and washable protective hard cotton pillow cover (qty 1) Minimum Dimensions 7) 900 x 1900 mm (WxL) SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications
Line Item #3 / E-52.01.00: Chair, housing Visitor chair as per image below or its equivalent Characteristics 1) Steel epoxy coated main structure 2) Cushion thickness of seat and backrest cushions of approximately 30mm 3) Washable cushion (impermeable) Approximate Dimensions 4) 470 x 470 x 790mm (WxDxH) SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications
Line Item #4 / E-21.10.00: Cupboard, clothes Metallic sheet cupboard for use in bedrooms Operational characteristics 1) Sturdy epoxy-coated steel frame 2) Internal two sections, combinations of adjustable height shelves system, and garment rod for hanging long clothes. 3) Lower shelf (not indicated in the indicative picture below) 4) Set of three hinges on each door. 5) Locking system with two keys provided. Minimum Dimensions 6) 1000 x 500 x 1800mm (WxDxH).
Line Item #5 / E-21.11.00: Desk Simple Metallic or highly compressed high quality chipboard desk for office use. Characteristics 1) Simple Sturdy Office desk with three drawers mounted on one side. 2) Sturdy epoxy-coated frame as per example below. Minimum Dimensions 3) 1150 x 750 x 720mm (WxDxH). Operational characteristics 4) Drawer for keyboard SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications
Line Item #6 / E-52.04.00: Fridge, Small Under counter refrigerator with improved energy consumption Electrical characteristics 1) A 120V, 60Hz mono-phase electrical source with line connection plug NEMA 5-15 type. 2) Protections against over-voltage and over-current line conditions. 3) Compliance with applicable Haitian standards and regulations. Functionality and Performance 4) External construction PVC-coated, anticorrosion and nontoxic hot-zinced plate frame or equivalent. 5) Adjustable thermostat 6) Refrigerant CFC free. 7) At least 2 internal shelves and 1 drawer. 8) Capacity of at least 80 liters 9) Freezer of at least 10 liters
Line Item #7 / E-52.05.00: Fridge, 2 doors with freezer Refrigerator with freezer with improved energy consumption Electrical characteristics 1) A 120V, 50Hz mono-phase electrical source with line connection plug NEMA 5-15 type. 2) Protections against over-voltage and over-current line conditions. 3) Compliance with applicable Haitian standards and regulations. Functionality and Performance 4) External construction PVC-coated, anticorrosion and nontoxic hot-zinced plate frame or equivalent. 1) Adjustable thermostat 5) Refrigerant CFC free. 6) At least 2 internal shelves and 1 drawer. 7) Indicative capacity 170 liters for fridge and 50 liters for freezer. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications
Line Item #8 / E-52.06.00: Gas stove, Large Large range 30 oven with 6 cooking fires Characteristics 1) 6 gas cooking fires 2) 30 wide gas oven 3) Steel frame and body 4) Glass oven door Approximate Dimensions 5) 800 x 500 x 850mm (WxDxH). Additional consumables and accessories TO BE included in the bid price: 6) Propane gas tank connectors and installation (qty 1 hose, valve and accessories)
Line Item #9 / E-52.07.00: Gas stove, Small Large range 20 oven with 4 cooking fires Characteristics 1) 4 gas cooking fires 2) 20 wide gas oven 3) Steel frame and body 4) Glass oven door Approximate Dimensions 5) 600 x 600 x 850mm (WxDxH). Additional consumables and accessories TO BE included in the bid price: 6) Full propane gas tank 25LBS 7) Propane gas tank connectors and installation (qty 1 for each stove - hose, valve and accessories)
Line Item #10 / E-21.12.00: Mirror Small no frame mirror to be used in bathroom above the sink. Characteristics 1) Simple no frame mirror 2) Complete with support hanging elements 3) 600 x 800 mm Approx. (to be mounted preferentially horizontally or vertically depending on the available space). Additional consumables and accessories TO BE included in the bid price: 4) set of screws and fishers for wall mounting
Line Item #11 / E-21.15.00: Seats, Row, Waiting Area, 3 Places Linked chair for the waiting area in hospitals for patients and relatives Operational characteristics 1) Sturdy metallic bench. 2) Resistant also to partial external exposure 3) Metallic seat, legs and beam epoxy coated, without cushions Minimum Dimensions 4) 155 x 70 x 90cm (WxDxH). SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications
Line Item #12 / E-52.08.00: Table, Bedside Simple table in metal or hard wood with under-shelf for the bed side Functionality and Performance 1) Simple sturdy hardwood structure as per example below. 2) 1 drawer with under-shelf Approximate Dimensions 3) 280 x 280 x 550mm (WxDxH). SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications
Line Item #13 / E-52.09.00: Table, Large with 4 chairs Simple round or rectangle table with 4 chairs. Functionality and Performance 1) Round or rectangle tables for dinner among 4 people. 2) Manufactured from high density laminated chip boards, simple sturdy metallic or hardwood structure. 3) 4 Chairs with upholstery no castors with protective rubbers on the legs and cushion seats Minimum Dimensions 4) 20mm board thickness 5) 1500mm diameter or 750 x 1200 mm (W x L)