The baying system PS 000
The baying system PS 000 Design and technology customised to meet your needs Top quality and economy characterise the PS system. The profile is one of the core features of our successful concepts. It offers top quality combined with a maximum useful internal space, unlimited assembly due to rows of holes in a 5 mm grid, no need for manual machining due to approx. 1000 square and 1000 round holes (for medium sized enclosures) as well as 1 tapped holes at corners where assembly work is mostly required. Internationally acknowledged approvals, product certifications according to worldwide standards and comprehensive tests at our own test laboratories guarantee for top product quality - for you to be on the safe side. Eight plug-in corner connectors and additional welding provide for Section through the vertical profile (above image) and the door with the strong connections. tubular door frame. Stability and high protection category are provided by 18 tapped holes in each corner provide for direct attachment of the mounting plate, of swing frame, cable clamp rails or baying brackets. The surface is well protected by nano-ceramic coating, dipcoat the profile and the labyrinth system. Maximum sizes of orifices and two rows of holes in all twelve profiles provide for free access from all sides for universal installation. primed. 0 The baying system PS 000
The baying system PS 000 Identical the roof and base frame Quick assembly just locate and fix it Diversity is offered by groove and assembly systems. At any point within the room an attachment point can be implemented. PS 000 Technology which has your solution. The baying system PS 000 03
The baying system PS 000 Enclosure frame: 9-fold profile Door:.0 mm Rear panel: 1.5 mm Mounting plate: 3.0 mm Gland plate: 1.5 mm. Enclosure frame with door, removable rear panel and roof plate, eyebolts fitted, mounting plate, gland plates, depth stay as shipping brace (r/h door hinge, can be changed to opposite side - single door Lockable door on right - double door). Surface finish: Enclosure frame & bottom cover: Dipcoat primed. Door, roof and rear panel: dipcoat primed, powder coated in textured RAL 7035 on the outside Mounting plate & Gland plate: Galvanized sheet steel. Protection Category: IP 55 to EN 60 59 Complies with NEMA 1. Single Door Article No. PS 68.500 685.500 60.500 605.500 606.500 608.500 66.500 88.500 885.500 886.500 888.500 80.500 805.500 806.500 808.500 86.500 08.500 PS Selection Example:- Size in mm W x H x D 600x1x00 600x1x500 600x00x00 600x00x500 600x00x600 600x00x 600x0x600 x1x00 x1x500 X1X600 x1x x00x00 x00x500 x00x600 x00x x0x600 1000x1x00 Double Door Article No. PS 005.500 006.500 008.500 8.500 85.500 Size in mm W x H x D 86.500 10x1x600.500 10x00x00 5.500 8.500 6.500 1000x00x500 1000x00x600 1000x00x 10x1x00 10x1x500 10x00x500 6.500 10x00x600 10x00x 10x0x600 Configuration details: 8 0 8 5 0 0 500 : Enclosure frame, front door, rear bolted cover, roof plate with eyebolts, bottom cover with standard gland plate and one mounting plate. 501 : Enclosure frame, front door, rear door, roof plate with eyebolts, bottom cover with standard gland plate and one mounting plate. 510 : Enclosure frame, front door, rear bolted cover, roof plate with eyebolts, bottom cover with standard gland plate. 511 : Enclosure frame, front door, rear door, roof plate with eyebolts, bottom cover with standard gland plate. 51 : Enclosure frame, front door, rear door, roof plate with eyebolts, bottom cover with standard gland plate and two mounting plates. Note: Enclosure with IP 65 & Seismic panels - available on request Special size available on request PS 000 Series Width Height Depth RAL 7035 No. of Mounting plates Rear panel/door Width 6 600 W 8 W 0 1000 W 10 W Height 8 1 H 0 00 H 0 H Depth 00 D 5 500 D 6 600 D 8 D Mounting plate 0 1 mounting plate 1 without mounting plate mounting plates Rear 0 Rear panel 1 Rear door 0 The baying system PS 000
The baying system PS 000 Base / Plinth PS For increased floor clearance or for cable entry available with a height of either 100 or 0 mm. Model No. SO Surface finish: Color - RAL 70 texture spray finished Cover caps- plastic (color RAL 9005) corner pieces, cover caps and removable width & depth trim pre-configured assembly parts Trim panels at the front and rear with fitted corner pieces and side trim panels without cover caps 1000 80.0 807.0 813.0 86.0 83.0 89.0 833.0 88.0 909.0 91.0 916.0 836.0 839.0 8.0 853.0 9788.06 805.0 808.0 8.0 830.0 910.0 837.0 80.0 Baying kit for PS : The stable, secure standard connection, including fixing material. Hexagon steel section, Zinc plated, passivated Assembly parts Packs of 6 580.000 Angular baying bracket for PS : For baying two enclosures or as an additional reinforcement to baying kit. PS 580.000 or 581.000 zinc plated, passivated Assembly parts Note: Not suitable for use with a fitted divider panel Packs of 58.000 Quick- fit baying clamp for PS : For quick in situ assembly, also suitable for temporary use in the workshop. zinc plated, passivated Assembly parts Note: Not suitable for the transportation of bayed enclosure suites Packs of 6 581.000 The baying system PS 000 05
The baying system PS 000 Baying bracket for PS : Baying in situations where the rear panels and doors are not intended to be removed for baying or where divider panels and inner walls are already fitted. zinc plated, passivated Assembly parts Packs of 6 pairs 58.000 Combination angle For optimum distribution of tensile forces during transportation of bayed enclosures by crane. Surface finish: Zinc plated Assembly parts. Packs of Model No. TS 50.000 Cable entry plates For cable entry grommets connector grommets instead of segments of the standard divided gland plates. Steel section, Zinc plated, passivated Assembly parts 3.700 31.700 33.700 35.700 Cable entry grommets In conjunction with the cable entry plate, simple and fast sealing of cables inserted in the base area of enclosures. Material Body : Polypropylene Cover : Thermoplastic elastomer Protection category IP55 subject to correct mounting 316.000 317.000 318.000 06 The baying system PS 000
The baying system PS 000 Suitable for cable diameters from 8 to 36 mm Outer cover: Polypropylene covered with thermoplastic elastomer Seal: Cellular rubber Protection category: IP 55 subject to correct mounting. 311.000 Mounting angle for TS, PS, PC, TP Universal Console, Base / Plinths For strain relief with cable entry. Depth - variable mounting on a 5 mm pitch Pattern on the horizontal enclosure section or inside base/ plinth trim panels with assembly bolts. Steel Surface finish: Zinc plated Assembly parts 385 585 785 985 1185 193.000 191.000 19.000 336.000 196.000 Cable clamps for cable clamp rails For fastening the cables to the cable clamp rails. Surface finish: Zinc-plated Plastic insert For cable diameter mm Packs of Model No. SZ 6 1 5 350.000 1 16 5 351.000 1 18 5 35.000 18 5 353.000 6 5 35.000 6 30 5 355.000 30 3 5 356.000 3 38 5 357.000 38 5 358.000 6 5 359.000 6 50 5 360.000 For heavy installed equipment such as transformers. T-head screw and slot in the support rail to accommodate all mounting dimensions. Note: fixing in the enclosure width only 361.000 36.000 37.000 363.000 Sheet Steel Surface finish: Zinc Plated - system support rails( 5 x 5mm) - T - head screws M1 x 60 mm - Assembly parts The baying system PS 000 07
The baying system PS 000 Side panels for PS, screw fastened To finish off a complete enclosure unit. Simply locate and secure with 6 screw fasteners 1.5 mm Surface Finish: Dipcoat-primed, powder- coated on the outside with RAL 7035 textured Assembly parts Height (mm) Depth (mm) 1 1 1 1 00 00 00 00 0 0 0 0 00 500 600 00 500 600 00 500 600 Packs of Model No. PS 18.35 185.35 186.35 188.35 10.35 105.35 106.35 108.35 1.35 15.35 16.35 18.35 Door rail for PS For direct screw-fixing to the tubular door frame Surface Finish: Zinc plated For door width (mm) 00 500 600 900 1000 59.000 309.000 596.000 598.000 579.000 599.000 Packs of Assembly screws D = 90mm For TS, CM, PS PC, TP pedestal For fastening to tubular door frames at any height Colour : RAL 7035 Assembly screws For door width (mm) 11.000 115.000 116.000 118.000 13.000 1.000 Wiring plan pockets plastic Polystyrene with self-adhesive fastening strips. Article No. SZ 513.000 51.000 515.000 For Format A3 landscape A Portrait A5 landscape For affixing to the inside surfaces of doors. 08 The baying system PS 000
The baying system PS 000 Ergoform-S lock system The unlocked handle folds down forwards and the lock is opened by swiveling. Prepared for the installation of all 7 mm lock inserts, version A as well as SZ lock and push-button inserts. Die-cast zinc Surface Finish: Powder-coated Design RAL 703 with brown handle RAL 7035 with brown handle Brown Matt nickel-plated RAL 703 RAL 7035 1) RAL 7035 with brown handle and bracket Model No. SZ 50.000 50.010 51.000 5.000 5.000 35.000 55.000 55.010 Hole diameter = 7 mm for padlock or multiple latch Lock and push-button inserts For installation in Comfort handle for semi-cylinders Ergo form - S standard Folding lever handle for CM Model No. SZ 67.000 68.000 69.000 Lock inserts Version A, length 7 mm 7 mm square 8 mm square 7 mm triangular 8 mm triangular Screwdriver Daimler insert 3 mm double-bit Fiat 6.5 mm triangular (CNOMO) 60.000 61.000 6.000 63.000 6.000 65.000 66.000 307.000 60.650 Mounting Plate infill For a continuous mounting surface in bayed suites where the mounting plate is set forward., zinc plated, passivated. Supply includes : Assembly parts Article No. TS/PS 590.700 591.700 59.700 For Encl Height 1 00 0 The baying system PS 000 09
The baying system PS 000 Hinges 180 For retrospective conversion of standard doors with 130 hinges. Including assembly parts. For PS, universal console TP, TP pedestal Packs of Model No.PS 6 189.000 Aluminium Surface finish : Powder-coated in RAL 8019 Rail systems Horizontal support strips Installation options: On the PS system punching, in the enclosure depth On the tubular door frame PS, TS On the outer mounting level TS Surface Finish: Zinc plated Assembly screws For Enclosure Width/Depth mm 00 500 600 Length mm Packs of Model No.PS 30 0 50 70 69.000 695.000 696.000 697.000 PS punched rails 3 x 3 mm Installation options : On the horizontal enclosure section Directly via angle brackets PS 181.000, mounting brackets PS 18.000 or support brackets PS 183.000 in conjunction with U nuts On the vertical enclosure section Directly via support brackets TS Via adaptor rail for PS compatibility in conjunction with angle brackets, mounting brackets or support brackets PS Surface Finish: Zinc plated Also required: U nuts Mounting brackets TS/PS or Angle brackets, support brackets TS/PS Length mm For WHD mm Packs of 95 00 1 Model No.PS 169.000 395 500 1 170.000 95 600 1 171.000 695 1 17.000 895 1000 1 173.000 1095 10 6 17.000 195 195 1695 1895 100 1600 1 00 6 6 6 6 393.000 175.000 176.000 177.000 95 0 6 178.000 10 The baying system PS 000
The baying system PS 000 PS punched section without mounting flange, 3 x 73 mm with 5 rows of holes for universal skeleton structures or partial assembly. Installation options: On the vertical enclosure section Directly via support brackets TS Via adaptor rail for PS compatibility in conjunction with support brackets PS On the horizontal enclosure section Directly via support brackets PS 183.000 Length mm For WHD mm Packs of Model No.PS Surface Finish: Zinc plated Also required: Support brackets PS/TS 95 395 95 695 895 1095 1695 1895 95 00 500 600 1000 10 1 00 0 37.000 375.000 376.000 377.000 38.000 378.000 379.000 380.000 381.000 PS punched section with mounting flange 3 x 73 mm Variable, with 5 rows of holes for universal skeleton structures or partial assembly. Simply locate into the system punchings and secure. Installation options: On the vertical enclosure section Via adaptor rail for PS compatibility On the horizontal TS enclosure section On the PS system punchings, in the enclosure depth* Surface Finish: Zinc plated Assembly screws * Installation in enclosure depth PS,TP universal console, mm 00 500 600 **Installation in enclosure width / depth TS mm 600 1000 Packs of Model No.PS 369.000 Packs of 370.000 371.000 37.000 Model No.PS 36.000 365.000 373.000 10 367.000 ** installation in enclosure width for PS The baying system PS 000 11
The baying system PS 000 Angle bracket PS For quick attachment of punched rails 3 x 3 mm. Installation options: On the vertical TS enclosure section via Adaptor rail for PS compatibility On the horizontal TS enclosure section On enclosures and rails with rectangular system punching 1.5 x 10.5 mm. Surface Finish: Zinc plated Supply includes (1 set) : 1 angle bracket, left 1 angle bracket, right metal screws 5.5 x 13 mm Packs of Model No.PS 1 set 181.000 Also required : U nuts for punched rails Multi-tooth screws M6 x 1 mm, 50.500 Mounting bracket PS Packs of Model No.PS For variable attachment of punched rail 3 x 3 mm. Installation options: Optionally flush with : Outer enclosure edge or Enclosure clearance width On the vertical TS enclosure section via Adaptor rail for PS compatibility, On the horizontal TS enclosure section On enclosures and rails with rectangular system punching 1.5 x 10.5 mm Die-cast zinc Supply includes (1 set) : 1 mounting bracket 1 screw M6 x 1 mm 1 cage nut M6 set 18.000 Also required : U nuts for punched rails (recommended: M6) Multi-tooth screws M6 x 1 mm, 50.500 1 The baying system PS 000
The baying system PS 000 Support bracket PS For the attachment of punched sections without mounting flange 3 x 73 mm or punched rails 3 x 3 mm. Packs of Model No.PS set 183.000 Installation options: On the vertical TS enclosure section via Snap-on nut TS 8.806, Adaptor rail for PS compatibility On the horizontal TS enclosure section On enclosures and rails with rectangular system punching 1.5 x 10.5 mm Die-cast zinc Supply includes (1 set) : 1 support bracket countersunk screws serrated lock washers Also required : U nuts for punched rails (recommended: M6) Multi-tooth screws M6 x 1 mm Adaptor rail for PS compatibility (when mounting on the vertical enclosure section) Bracket/spacer For fastening C rails, punched rails or cable clamp rails (angle section). On the sides, to accommodate square sections or tubes (Ø mm). Attachment points with M8 thread. Packs of Model No.PS 6 set 199.000 Installation options : On the vertical TS enclosure section via Snap-on nut TS 8.808, or Adaptor rail for PS compatibility On the horizontal TS enclosure section On enclosures and rails with rectangular system punching 1.5 x 10.5 mm Die-cast zinc Supply includes (1 set) : 1 bracket/spacer screws M8 x 16 mm spring lock washers cage nuts M8 serrated lock washers Metal screws The baying system PS 000 13
The baying system PS 000 U nuts For Punched rail 3 x 3 mm Punched section without mounting flange, 3 x 73 mm Punched section without mounting flange, 5 x 88 mm Punched section with mounting flange, 3 x 73 mm Thread M M5 M6 M8 Packs of Model No.TS 119.000 157.000 179.000 180.000 For mounting punched rails and punched sections without mounting flanges on angle brackets, mounting brackets and support brackets, we recommend U nuts with M6 thread (PS 179.000) : Multi-tooth screws M6 x 1 mm, (for PS 179.000) Captive nuts/threaded blocks Installation options : On enclosures and rails with rectangular system punching 1.5 x 10.5 mm, such as: TS enclosure section vertically, via adaptor rail for PS compatibility horizontally, direct PS enclosure body, all-round Punched rail 3 x 3 mm Punched section without mounting flange, 3 x 73 mm Punched section without mounting flange, 5 x 88 mm Punched section with mounting flange, 3 x 73 mm Thread M5 M6 M8 Packs of Model No.TS 50 166.000 50 50 16.000 165.000 Captive nuts The compression spring, designed as an insertion aid, ensures reliable mechanical and electrical connection in the system punchings. Threaded block With snap-off insertion aid, die-cast zinc Thread M6 M8 Packs of Model No.TS 50 16.000 50 163.000 1 The baying system PS 000
The baying system PS 000 Door stay To secure door in open position. Assembly Bottom Packs of Model No. 5 583.000 Ride-Up roller Lifts the door with heavy installed equipment (e.g. cooling unit) as a closing aid. For attaching to the tubular door frame. Packs of Model No. TS 10 538.000 Limit switch Lifts the door with heavy installed equipment (e.g. cooling unit) as a closing aid. For attaching to the tubular door frame. Article No. 17.010 Description Door-operated Switch with Support plate The baying system PS 000 15
Enclosures Power Distribution Climate Control IT Infrastructure Software & Services RITTAL India Pvt. Ltd. No. 3 & KIADB Industrial Area Veerapura Doddaballapur - 561 3 Bengaluru District Tel: +91(0)80 337 0700 Fax: +91(0)80 337 0866 Email: info@rittal-india.com Website: www.rittal-india.com