Model 60 Holds 8 1/2 Pounds Panned Candy Chute, Chute Plates, Chute Door, Center Rods 5-000-2 Mdse Chute Plate (for metal chute) 1.35 5-000-2P Mdse. Chute Plate (for plastic chute) 1.35 5-000-31 Mdse. Chute, Plastic 3.10 5-000-311 Mdse. Chute, Metal 6.45 5-000-33 Mdse. Chute Door, Northwestern NET 5.00 5-000-37 Mdse. Chute Door, Plain 5.00 5-200-3A Center Rod w/nut 1.05 Tops, Case, Hopper, Base 5-000-4A Top w/lock Barrel (Chrome) 15.70 5-000-4A Top w/lock Barrel (Specify Color) 8.50 5-000-4 Top w/out Lock Barrel (Specify Color) 7.50 5-100 Case w/trim (Specify Color) 11.05 5-200-1 Base (Specify Color) 9.95 5-200-5 Base for Cash - n - Dash 12.80 5-300-1 Hopper (Specify Color) 9.30 Globes, Gaskets, Top Rings, Globe Rods 5-350-20 Model 60 Plastic Globe 7.50 5-350-1 Globe Gasket 0.85 5-350-3A Top Ring w/gasket 2.15 5-350-4 Globe Rod 0.80 Service Units w/ Plastic Globe (Includes Assembled Globe, Hopper, Wheel and Br. Hsg.) 5-300-SM Serv. Unit - Shallow Mdse (Metal Wheel & BH) 33.60 5-300-DM Serv. Unit - Deep Mdse 31.50 5-300-RJ Serv. Unit - Rocket/Jumbo 31.50 5-300-1C Serv. Unit - 1" Capsule 33.60 5-300-LC Serv. Unit - 1 1/2" Capsule (Metal Wheel & BH) 36.45 5-300-JB Serv. Unit - Jawbreaker(Metal Wheel & BH) 35.00
Super 60 A Plastic Globe Vendor Holding 13-14 lbs. Panned Candy Chute, Chute Plates, Chute Door, Center Rods 5-000-2 Mdse Chute Plate (for metal chute) 1.35 5-000-2P Mdse. Chute Plate (for plastic chute) 1.35 5-000-31 Mdse. Chute, Plastic 3.10 5-000-311 Mdse. Chute, Metal 6.45 5-000-33 Mdse. Chute Door, Northwestern NET 5.00 5-000-37 Mdse. Chute Door, Plain 5.00 5-360-3A Center Rod & Nut 1.05 Tops, Case, Hopper, Base 5-100 Case w/trim (Specify Color) 11.05 5-200-1 Base (Specify Color) 9.95 5-200-2 Base for Suction Cup Bumpers 9.95 5-360-2A Top Assy w/out Lock Barrel (Specify Color) 9.30 5-360-2B Top Assy w/lock Barrel (Specify Color) 10.70 5-360-2A Top Assy. w/out Lock Barrel (Chrome) 15.00 5-360-2B Top Assy. w/lock Barrel (Chrome) 16.45 5-360-4 Hopper (Specify Color) 9.65 5-360-6 Hopper Screw 0.09 Globes, Gaskets and Etc. 5-360-1A Plastic Globe 8.50 5-350-1 Globe Gasket 0.85 Service Units (Includes Assembled Globe, Hopper, Wheel & Br. Hsg.) 5-360-SM Serv. Unit - Shallow Mdse (Metal Wheel & BH) 32.15 5-360-DM Serv. Unit - Deep Mdse. 27.85 5-360-RJ Serv. Unit - Rocket/Jumbo 27.85 5-360-JB Serv. Unit - Jawbreaker (Metal Wheel & BH) 30.70 5-360-1C Serv. Unit - 1" Capsule 29.30 5-360-LC Serv. Unit - 1 1/2" Capsule (Metal Wheel & BH) 32.15
Mega 60 Largest of the 60 Series, 12" Round Plastic Globe Holding 30-40 lbs Panned Candy Chute, Chute Plates, Chute Door, Center Rods 5-000-2 Mdse Chute Plate (for metal chute) 1.35 5-000-2P Mdse. Chute Plate (for plastic chute) 1.35 5-000-31 Mdse. Chute, Plastic 3.10 5-000-311 Mdse. Chute, Metal 6.45 5-000-33 Mdse. Chute Door, Northwestern NET 5.00 5-000-37 Mdse. Chute Door, Plain 5.00 23-100-5A Center Rod & Nut (same as Model 80) 1.95 Tops, Case, Hopper, Base 5-100 Case w/trim (Specify Color) 11.05 5-200-1 Base (Specify Color) 9.95 5-200-2 Base for Suction Cup Bumpers 9.95 5-360-4 Hopper (Specify Color) 9.65 5-360-6 Hopper Screw 0.09 5-901-2A Top w/out Lock Barrel (Specify Color) 7.00 5-901-2A Top w/out Lock Barrel (Chrome) 11.00 5-901-2B Top w/lock Barrel (Specify Color) 8.50 5-901-2B Top w/lock Barrel (Chrome) 12.50 Globes, Gaskets, Baffles, Etc. 5-901-1 Globe 30.35 5-350-1 Globe Gasket (Plastic) 0.85 5-330-FHA Fat Head Br. Hsg. Assy w/2 Springs 4.95 5-901-4 Washer Pawl Screws & Globe to Hopper 0.11 5-330-8 Extra Spring for Br. Hsg. 0.80 5-911 Baffle Assy. 3.45 5-911-1 Baffle Disc 2.35 Service Units 5-901-1C Serv. Unit - 1" Capsule 56.45 5-901-DM Serv. Unit - Deep Mdse 55.00 5-901-RJ Serv. Unit - Rocket/Jumbo 55.00
Big Case A Plastic Globe Vendor Holding 28-30 lbs Panned Candy Chute, Chute Plates, Chute Door, Center Rods 5-000-2 Mdse Chute Plate (for metal chute) 1.35 5-000-2P Mdse. Chute Plate (for plastic chute) 1.35 5-000-31 Mdse. Chute, Plastic 3.10 5-000-311 Mdse. Chute, Metal 6.45 5-000-33 Mdse. Chute Door, Northwestern NET 5.00 5-000-37 Mdse. Chute Door, Plain 5.00 5-900-5A Center Rod & Nut 2.50 Tops, Case, Hopper, Base 5-100 Case w/trim (Specify Color) 11.05 5-200-1 Base (Specify Color) 9.95 5-200-2 Base for Suction Cup Bumpers 9.95 5-360-4 Hopper (Specify Color) 9.65 5-900-1A Top w/out Lock Barrel (Specify Color) 11.05 5-900-1A Top w/out Lock Barrel (Chrome) 19.30 5-900-1B Top w/lock Barrel (Specify Color) 12.35 5-900-2 Adaptor (Specify Color) 10.35 Globes, Gaskets, Baffles, Etc. 5-900-4 Globe (Specify Decal ) NET 19.50 5-910 Baffle Assy 3.45 5-900-6 Carriage Bolt 0.13 5-900-7 Hex Nut 0.09 Service Units (Includes assembled globe, top, center rod, baffle, hopper, wheel & br. Hsg.) 5-900-1C Serv. Unit - 1" Capsule 51.45 5-900-DM Serv. Unit - Deep Mdse 49.30 5-900-SM Serv. Unit - Shallow Mdse 53.60 5-900-JB Serv. Unit - Jawbreaker 51.45 5-900-LC Serv. Unit - Large Caps 53.60 5-900-RJ Serv. Unit - Rocket/Jumbo 49.30
Decorative Fronts 5-000-5A Mylar Decorative Front (Gold - Set) 1.95 5-000-51A Mylar Decorative Front (Silver - Set) 1.95 Locks and Keys 5-000-8 Lock & Key (Specify Key #) 3.95 Key Only NET 2.50 Camlock & Key (Specify Key G#) 5.00 Camlock Key Only NET 2.50 5-000-17 Lock Barrel w/nut & Washer 2.75 Lock Barrel Nut Only 0.45 5-000-19 Ace and Key (Specify Key#1,2,3,4,5,10,11,12,13) 7.50 Ace Lock Key Only NET 2.50 5-000-191 Protective Washer (for Ace Lock) 1.60 Options 5-205-2 Merchandise Tray (Specify Color) 5.35 5-900-6 Screw for Mdse. Tray 0.13 5-000-7 Rubber Bumper (Set/4) 0.95 Decals 5-350-8 25c Decal 0.25 5-350-9 50c Decal 0.90 5-350-11 2 Quarter Back-To-Back 1.50 5-350-14 $1.00 Decal 0.90
Most Popular Wheels & Brush Housings For 850ct, 1430ct, 750-1400 ct Gum or 27mm High Bounce Balls For Super 60 Series 5-300 6ASSY RJ Wheel Assy. w/insert 5.75 5-330-H RJ-JB Brush Hsg. Assy w/heavy Springs (Plastic) 4.15 For Mega 60 5-300 6ASSY RJ Wheel Assy. w/insert 5.75 5-330-H RJ Brush Hsg. Assy w/5-330-6 Springs for Mega 60 (Plastic) 4.15 For Panned Candy & Nuts: M&M's, Chiclet Gum, Sweet Tarts, Etc. 5-300-12A Deep Mdse. Wheel w/adjuster 6.35 5-320 Deep Brush Hsg. Assy (Plastic) 6.35 For Panned Candy: Small Portions Only 5-300-9A Shallow Mdse. Wheel w/adjuster 8.20 5-310 Shallow Brush Hsg. Assy (Metal) 8.20 Four 1" Capsule Wheel Options (See Below) 5-300-11P-A New Plastic Capsule Wheel Assy 6.50 5-330-1P-A New Capsule Brush Housing Assy (Plastic) 4.15 5-300-11A Metal Capsule Wheel Assy 7.95 5-330-L Capsule Brush Hsg. Assy with Light Springs (Plastic) 4.15 5-300-11JA Metal JB Wheel Assy (P Spring) 7.85 5-330-H Capsule Brush Housing Assy w/heavy Springs (Plastic) 4.15 5-300-7A 1, 1.1, 1.2" Capsule Wheel Assy (Metal) (3 Long Springs) 7.85 5-330-6-1A 1, 1.1, 1.2" Cap. Brush Hsg. Assy (Plastic) 4.15 For Vending 350ct, 475ct, 600 ct Titan Gum 5-300-11A Capsule Wheel Assy (Metal) 7.85 5-330-H Capsule Brush Housing Assy w/heavy Springs (Plastic) 4.15 ** See Below if Metal or 5-300-11JA Jawbreaker Wheel Assy (Metal) 7.85 5-330-H Capsule Brush Housing Assy w/heavy Springs (Plastic) 4.15 ** See Below if Metal For Ping Pong Balls 5-300-15A Large Capsule Wheel Assy (Metal) 9.65 5-370 Large Capsule Br. Hsg. Assy (Metal) 6.95 (Requires cut down cam/spacer washer on mech) For 1.3 Capsules 5-300-15A 1.3" Capsule Wheel Assy (Metal) 9.65 5-370-13A 1.3" Capsule Brush Hsg. Assy (Metal) 6.80 (Requires cut down cam/spacer washer on mech)
Additional Wheel & Brush Housing Parts 5-300-6A R&J Insert Only 1.90 5-300-9 Shallow Mdse. Wheel Only 6.45 5-300-10 Shallow Portion Adj. 2.10 5-300-12 Deep Mdse. Wheel Only 5.00 5-300-13 Deep Portion Adjuster 2.15 5-310-1 Shallow Brush Hsg. Only 6.10 5-320-1 Deep Brush Housing Only 4.15 5-330-1P Caps./ RJ Br. Hsg. Only (Plastic) 3.60 5-330-1 Caps./ RJ Br. Hsg. Only (Metal) 5.00 5-370-1 1 1/2" Cap. Brush Hsg. Only (Metal) 5.00 5-370-3 Solid Brush Guard, Plastic 1.80 5-312 Agitator Assy. For JB 2.10 5-312-2 Holder for JB Agitator 1.00 Springs 5-300-14 Capsule Agitator Spring 0.55 5-300-16 RJ & Lg. Cap. Agit. Spring 0.80 5-312-3 Agitator Loop Spring 1.00 Brush Holders and Brush Springs 5-311-1 Brush Holder 1.10 5-311-L Brush Holder Assy Enter 2.35 5-311-S Brush Holder Assy Exit 2.35 5-311-2 Brush Spring, Short 0.30 5-311-4 Brush Spring, Long 0.30 5-330-2 Brush Spring, Light 0.35 5-330-5 Brush Spring, Heavy 0.35 5-330-6 Bleep Blip Brush Housing Spring Short 0.65 5-330-7 Bleep Blip Brush Housing Spring Long 0.65 Fasteners 5-110-4 Screw Used w/ 5-310 & 5-320 0.10 5-310-33 Screw Used w/ 5-330-H & 5-330-L 0.10 5-310-3 Shallow Br. Hsg. Screw 0.06 5-330-3 Cap. Or JB Brush Screw 0.09 5-330-4 Cap. Or JB Agitator Screw 0.09 5-330-9 Cap. Or JB Brush Housing Screw 0.09
3-612 Coin Mechansim Standard Coin Mechanism for Model 60 Series 3-612 Coin Mechanism Assy (1c,5c,10c,25c) 19.25 3-612DT Coin Mechaniam Assy (25c Drop-Thru) 19.25 3-632 Coin Mechanism Assy (2 Quarters Back to Back) 20.50 (For Foreign Currency Coin Mechanisms Send Sample Coin. Extra Milling Charge Will Be Quoted.) 3-612 Coin Mechanism Parts 3-612-43 Face Plate (Plain) 4.65 3-612-3 Cam 0.85 3-612-3LC Cam - Cut Down 1.20 5-500-4 Sprocket 1.35 3-612-5 Coin Pawl 0.50 3-612-6 Coin Pawl Spring 0.25 Coin Wheels 3-612-8 5c Coin Wheel 2.35 3-612-9 10c Coin Wheel 2.35 3-612-10 25c Coin Wheel 2.35 3-612-10D 25c Drop-Thru Coin Wheel 2.35 Two Coin Parts 3-612-14 Two Coin Face Plate 7.50 3-612-14F Two Coin Face Plate Filler 0.20 3-612-35 2-25c Back-Back Coin Wheel 3.95 3-612-36 Top Coin Pawl 0.50 3-612-37 Bottom Coin Pawl Back to Back 0.50 3-612-47 Coin Pawl Spring, 2 Coins Back to Back 0.30 Knob and Shaft 3-612-45 Knob & Shaft 4.20 5-520-3 Knob Shaft Washer (same as 3-612-48) 0.13 Mechanism Latch 3-612-24 New Latch 0.65 5-514-1 Latch 0.60 5-500-21 Latch Screw 0.20
3-612 Coin Mechansim Standard Coin Mechanism for Model 60 Series Back Plate Assembly 3-614-1C-10C Back Plate Assy (1c, 5c, 10c) 7.50 3-614-25C-50C Back Plate Assy (25c, 50c) 7.50 3-614-25cDT Back Plate Assy (25c DT) 7.50 3-614-1A Back Plate w/ret. Pawl 3.35 Rivets, Pawls, Pins, Springs, Kickouts 3-614-2 Washer Pawl, 25c 0.45 3-614-3 Washer Pawl, 1c, 5c, 10c 0.60 3-614-4 Washer Pawl Spring 0.25 3-614-5 Washer Pawl Spring Ret. 0.35 3-614-8 Return Pawl 0.25 3-614-9 Return Pawl Spring 0.30 3-614-10 Rivet for Return Pawl 0.25 3-614-12STP New Full Stroke Pin 0.50 3-614-13 Full Stroke Pin Spring 0.40 3-614-20 Coin Kickout 1c, 5c, 10c 1.00 3-614-22 Coin Kickout 25c, 50c 1.00 3-614-23 Anti-Piling Spring 1.20 3-614-27 Full Stroke Pawl 0.80 3-614-28 Full Stroke Spring 0.30 3-612 Mechanism Fasteners 23-500-13 Screw for Back Plate to Face Plate 0.15 3-614-10 Rivet for Return Pawl to Back Plate 0.25 3-614-14 Screw for Full Stroke Pin Spring to Back Plate 0.15 3-614-15 Screw for Coin Kickout to Back Plate 0.15 5-360-6 Screw for Sprocket to Knob Shaft 0.09 5-360-6 Screw for Washer Pawl Retainer to Back Plate 0.09 5-512-5 Screw for Return Pawl Spring to Back Plate 0.15 5-500-21 Screw for Latch to Face Plate 0.20
Model 80-19" Tall Unit Holding Approximately 118 2" Capsules Upper Unit 23-300-2 Upper Corner Post 3.50 23-300-3 Upper Panel (Specify Color) 5.00 23-300-6 Excap (Specify Color) 20.00 23-300-8 Plastic Display Panel 5.70 23-100-5A Center Rod & Nut 1.95 Rings, Hopper, Holders and Tops 23-100-3 Top & Middle Ring 5.85 23-200-1 Hopper 5.50 23-200-2 Wheel Hold Down Bracket 0.30 23-300-1 Hopper Adapter 8.50 23-300-7 Display Holder 3.95 23-400-A Top w/out Lock Barrel (Specify Color) 11.00 23-400-A Top w/out Lock Barrel (Chrome) 22.85 23-400-5 Step Top w/out Lock Barrel (Specify Color) 12.50 23-400-5 Step Top w/out Lock Barrel (Chrome) 25.75 23-400-B Top w/lock Barrel (Specify Color) 12.50 23-400-B Top w/lock Barrel (Chrome) 25.15 23-400-5 Step Top w/lock Barrel (Specify Color) 13.95 23-400-5 Step Top w/lock Barrel (Chrome) 27.15 (** Top Reinforcement - Add $1.00) Base, Rings, Fronts and Cash Box 23-100-1 Base (Specify Color) 12.15 23-100-2 Base Corner Post 2.65 23-100-3 Top & Middle Ring 5.85 23-100-4 Base Panel (Specify Color) 3.70 23-100-6 Cash Box 3.80 23-100-7 Base Tie Rod 0.60 23-120-1 ** Front - Silver 10.35 23-120-2 Front Hinge 0.65 23-120-A ** Front Assy -Silver 13.50 23-120-3A ** Locking Front Assy - Non-Crack Back 33.95 23-120-4A ** Locking Front Assy - Tri-Rise, Etc. 33.95 23-120-12A ** Locking Front Assy - Regular 32.55 (** Front Assy - other than Silver - Add $1.00) Chute, Chute Plates, Chute Door 23-110-1 Merchandise Chute 3.50 23-110-2 Chute Cover 1.60 24-121-1 Chute Door, Northwestern 7.85 23-121-3 Chute Door Bracket 0.60 23-121-4 Chute Door Spring 0.20 23-121-5 Chute Door Brkt. Screw 0.06
Super 80-25" Tall Unit Holding Approximately 157 2" Capsules Upper Unit 23-310-1 Upper Corner Post 4.65 23-310-3 Upper Panel (Specify Color) 5.95 23-310-5 Excap (Specify Color) 25.00 23-310-5J Jumbo Excap (Specify Color) 32.50 23-310-7 Plastic Panel 6.80 23-310-6A Center Rod & Nut 2.05 Rings, Hopper, Holders and Tops 23-100-3 Top & Middle Ring 5.35 23-200-1 Hopper 5.50 23-200-2 Wheel Hold Down Bracket 0.30 23-300-1 Hopper Adapter 8.50 23-300-7 Display Holder 3.95 23-400-A Top w/out Lock Barrel (Specify Color) 11.00 23-400-A Top w/out Lock Barrel (Chrome) 22.85 23-400-5 Step Top w/out Lock Barrel (Specify Color) 12.50 23-400-5 Step Top w/out Lock Barrel (Chrome) 25.75 23-400-B Top w/lock Barrel (Specify Color) 12.50 23-400-B Top w/lock Barrel (Chrome) 25.15 23-400-5 Step Top w/lock Barrel (Specify Color) 13.95 23-400-5 Step Top w/lock Barrel (Chrome) 27.15 (**Top Reinforcement - Add $1.00) Base, Rings, Fronts and Cash Box 23-100-1 Base (Specify Color) 12.15 23-100-2 Base Corner Post 2.65 23-100-3 Top & Middle Ring 5.85 23-100-4 Base Panel (Specify Color) 3.70 23-100-6 Cash Box 3.80 23-100-7 Base Tie Rod 0.60 23-120-1 ** Front - Silver 10.35 23-120-2 Front Hinge 0.65 23-120-A ** Front Assy - Silver 13.50 23-120-3A ** Locking Front Assy - Non-Crack Back 33.95 23-120-4A ** Locking Front Assy - Tri-Rise, Etc. 33.95 23-120-12A ** Locking Front Assy - Regular 32.55 (** Front Assy - other than Silver - Add $1.00) Chute, Chute Plates, Chute Door 23-110-1 Merchandise Chute 3.50 23-110-2 Chute Cover 1.60 24-121-1 Chute Door, Northwestern 7.85 23-121-3 Chute Door Bracket 0.60 23-121-4 Chute Door Spring 0.20 23-121-5 Chute Door Brkt. Screw 0.05
Super 80-30" a 30" Tall Unit Holding Approximately 236 2" Capsules Upper Unit 23-320-1 Corner Post 21" 6.30 23-320-2 Plastic Panel 7.85 23-320-3 Upper Panel (Specify Color) 7.05 23-320-6A Center Rod & Nut 2.65 23-320-7A Excap (Specify Color) 35.00 Rings, Hopper, Holders and Tops 23-100-3 Top & Middle Ring 5.35 23-200-1 Hopper 5.50 23-200-2 Wheel Hold Down Bracket 0.30 23-300-1 Hopper Adapter 8.50 23-300-7 Display Holder 3.95 23-400-A Top w/out Lock Barrel (Specify Color) 11.00 23-400-A Top w/out Lock Barrel (Chrome) 22.85 23-400-5 Step Top w/out Lock Barrel (Specify Color) 12.50 23-400-5 Step Top w/out Lock Barrel (Chrome) 25.75 23-400-B Top w/lock Barrel (Specify Color) 12.50 23-400-B Top w/lock Barrel (Chrome) 25.15 23-400-5 Step Top w/lock Barrel (Specify Color) 13.95 23-400-5 Step Top w/lock Barrel (Chrome) 27.15 (**Top Reinforcement - Add $1.00) Base, Rings, Fronts and Cash Box 23-100-1 Base (Specify Color) 12.15 23-100-2 Base Corner Post 2.65 23-100-3 Top & Middle Ring 5.85 23-100-4 Base Panel (Specify Color) 3.70 23-100-6 Cash Box 3.80 23-100-7 Base Tie Rod 0.60 23-120-1 ** Front - Silver 10.35 23-120-2 Front Hinge 0.65 23-120-A ** Front Assy - Silver 13.50 23-120-3A ** Locking Front Assy - Non-Crack Back 33.95 23-120-4A ** Locking Front Assy - Tri-Rise, Etc. 33.95 23-120-12A ** Locking Front Assy - Regular 32.55 (**Front Assy - other than Silver - Add $1.00) Chute, Chute Plates, Chute Door 23-110-1 Merchandise Chute 3.50 23-110-2 Chute Cover 1.60 24-121-1 Chute Door, Northwestern 7.85 23-121-3 Chute Door Bracket 0.60 23-121-4 Chute Door Spring 0.20 23-121-5 Chute Door Brkt. Screw 0.05
Model 80 & 83 Series Locks, Baffles and Optional Parts 23-310-8A 4" Baffle Assy. (For Use with 1" & 2" Cap) 3.45 23-400-18A 7" Baffle Assy 4.45 5-000-8 Lock & Key (Specify Key #) 3.95 Key Only 2.50 Net Camlock & Key (Specify Key G#) 5.00 Camlock Key Only 2.50 Net 5-000-17 Lock Barrel w/nut & Washer 2.75 Lock Barrel Nut Only 0.45 5-000-19 Ace Lock & Key (Top) (Specify Key #) 7.50 Ace Key Only 2.50 Net 2-103-3 Ace Cam Lock & Key(Front) (Specify Key #) 7.50 Ace Cam Lock Key 2.50 Net 5-000-191 Protective Washer 1.60 Decals For 80 Series 2-202-7 10c Decal 0.90 2-202-8 25c Decal 0.80 2-202-9 50c Decal 0.80 2-202-10 75c Decal 1.50 2-202-11 $1.00 Decal 1.50
Model 83 24-100-A Model 83 Case Assy 37.15 24-300-2 Model 83 Display Panel (Drilled) 4.95 24-300-2A Display Panel Assy w/bracket 7.85 Rings, Hopper, Holders and Tops 23-100-3 Top & Middle Ring 5.35 23-200-1 Hopper 5.50 23-200-2 Wheel Hold Down Bracket 0.30 23-300-1 Hopper Adapter 8.50 23-300-7 Display Holder 3.95 24-400-A Top w/out Lock Barrel (Specify Color) 11.35 24-400-A Top w/out Lock Barrel (Chrome) 23.60 24-400-B Top w/lock Barrel (Specify Color) 12.50 24-400-B Top w/lock Barrel (Chrome) 25.00 Base, Rings, Fronts and Cash Box 23-100-1 Base (Specify Color) 12.15 23-100-2 Base Corner Post 2.65 23-100-3 Top & Middle Ring 5.85 23-100-4 Base Panel (Specify Color) 3.70 23-100-6 Cash Box 3.80 23-100-7 Base Tie Rod 0.60 24-120-A ** Front Assy - Silver 16.80 24-120-1 ** Front - Silver 12.80 24-300-1 Front Panel Bracket 3.70 23-120-2 Front Hinge 0.65 (** Front Assy other than Silver - Add $1.00) Chute, Chute Plates, Chute Door 24-110-1 S83-M83 Mdse Chute 3.20 23-110-2 Chute Cover 1.60 24-121-1 Chute Door, Northwestern 7.85 23-121-3 Chute Door Bracket 0.60 23-121-4 Chute Door Spring 0.20 23-121-5 Chute Door Brkt. Screw 0.05
Super 83 24-130-A Super 83 Case Assy 44.30 24-310-2 Super 83 Display Panel (Drilled) 6.45 24-310-2A Display Panel Assy w/bracket 9.95 Rings, Hopper, Holders and Tops 23-100-3 Top & Middle Ring 5.35 23-200-1 Hopper 5.50 23-200-2 Wheel Hold Down Bracket 0.30 23-300-1 Hopper Adapter 8.50 23-300-7 Display Holder 3.95 24-400-A Top w/out Lock Barrel (Specify Color) 11.35 24-400-A Top w/out Lock Barrel (Chrome) 23.60 24-400-B Top w/lock Barrel (Specify Color) 12.50 24-400-B Top w/lock Barrel (Chrome) 25.00 Base, Rings, Fronts and Cash Box 23-100-1 Base (Specify Color) 12.15 23-100-2 Base Corner Post 2.65 23-100-3 Top & Middle Ring 5.85 23-100-4 Base Panel (Specify Color) 3.70 23-100-6 Cash Box 3.80 23-100-7 Base Tie Rod 0.60 24-120-A ** Front Assy - Silver 16.80 24-120-1 ** Front - Silver 12.80 24-300-1 Front Panel Bracket 3.70 23-120-2 Front Hinge 0.50 (**Front Assy - other than Silver - Add $1.00) Chute, Chute Plates, Chute Door 24-110-1 S83-M83 Mdse Chute 3.20 23-110-2 Chute Cover 1.60 24-121-1 Chute Door, Northwestern 7.85 23-121-3 Chute Door Bracket 0.60 23-121-4 Chute Door Spring 0.20 23-121-5 Chute Door Brkt. Screw 0.05
Model 80 & 83 Series Hopper Ring Assembly (Includes Hopper, Wheel, Brush Housing, Spring with Adapter Ring) 23-300 2" Cap. Hopper Ring Assy (Old Style) 23.00 Net 23-300-A Type 2 Soft Touch Hopper Ring Assy 25.00 Net 23-300-A Type 3 Mega Gum Hopper Ring Assy 25.00 Net 23-300-1.3C 1.3" Cap. Hopper Ring Assy 25.00 Net 23-300-1C 1" Cap. Hopper Ring Assy 25.00 Net 23-300-LG Large Gum Hopper Ring Assy 25.00 Net 23-300-SG Small Gum Hopper Ring Assy 25.00 Net 23-300-PM Panned Mdse Hopper Ring Assy 25.00 Net 23-300-TG Titan Gum Hopper Ring Assy 25.00 Net 23-300-G Golf Ball Hopper Ring Assy 25.00 Net Hopper Assembly (Includes Hopper, Wheel, Br. Hsg., Spring) 23-200 2" Cap. Hopper Assy (Old Style) 17.95 Net 23-200-A Type 2 Soft Touch Hopper Assy 19.00 Net 23-200-A Type 3 Mega Gum Hopper Assy 19.00 Net 23-200-1.3C 1.3" Cap. Hopper Assy 19.00 Net 23-200-1C 1" Cap. Hopper Assy 19.00 Net 23-200-LG Large Gum Hopper Assy 19.00 Net 23-200-SG Small Gum Hopper Assy 19.00 Net 23-200-PM Panned Mdse Hopper Assy 19.00 Net 23-200-TG Titan Gum Hopper Assy 19.00 Net 23-200-G Golf Ball Hopper Assy 19.00 Net
Model 80 & 83 Series Wheels and Brush Housings 23-210 2" Cap. Wheel Assy 7.50 23-212-A Type 2 Mega Brush Hsg. Assy (for 2" Capsules/Mega Gum/45/49 mm HBB) 9.30 or 23-210 2" Capsule Wheel Assy 7.50 23-211 2" Capsule Brush Hsg. Complete (Old Style) 3.60 23-210 2" Capsule Wheel Assy 7.50 23-210-5 1.3" Capsule or 38 mm Ping Pong 9.65 23-210-6A 1.3" Capsule or 38 mm Ping Pong Brush Hsg. Complete 6.05 23-220-C Mdse. Wheel Assy., 1" Cap. Adjustable Wheel 9.65 23-221 Mdse. Wheel Br. Hsg. Assy (Old Style for 1-1.2" Capsules) 6.30 23-260-CAP New 1.1" Cap. Wheel Assy (6 round holes) 9.95 23-620-2A New 1.1" Cap Br. Hsg Assy 6.30 23-220-PM Mdse. Wheel Assy., Panned 9.95 23-222 Mdse. Wheel Br. Hsg. Assy 7.50 23-220-TG Mdse. Wheel Assy., Titan (600ct) (Adjustable Wheel) 9.95 23-221 Mdse. Wheel Br. Hsg. Assy 6.30 23-260-S Small Gum Wheel Assy (1 Pc. 3650 Count Gum) 9.95 23-620 Small Gum Brush Hsg. 7.50 23-260-L Large Gum Wheel Assy (850 Count Gum) 9.95 23-620-5A Large Gum Brush Hsg 7.75 Additional Wheel and Brush Housing Parts 23-210-1 2" Cap. Wheel Only 6.80 23-210-2 2" Cap. Agitator Spring 0.75 23-210-4 2" Cap. Brush Hsg. Spring 0.45 23-210-7 Spring 0.40 23-210-8 Spring 0.40 23-220-2A Metal Portion Adjuster 5.80 5-300-16 Agitator Spring 0.80 23-220-5 Mdse. Wheel Spider (filler) 4.65 23-220-6 Brush Housing Hold Down Retainer 1.45 23-221-2 Mdse. Wheel Brush Spring 0.20 23-260-3 Gum Wheel Adap., large (pr) 3.80 23-260-4 Gum Wheel Adap. 3.80 23-620-4 Small Gum Brush Hsg 5.80 23-620-5 Large Gum Brush Hsg. Adap. 3.10
Model 80 & 83 Series Screws for Front Assembly and Hopper 23-120-4 Chute Screw 0.11 23-121-5 Chute Door Bracket Screw 0.06 23-300-9 Screw for Wheel Hold Down Brkt to Hopper 0.10 23-300-9A Screw for Hopper Assy. To Corner Post 0.15 3-612-12 Screw for 2 Hinges to Front 0.10 3-612-12 Screw for Hopper to Hopper Ring 0.10 Screws for Wheels and Brush Housings 23-300-9 Screw for Springs to 2" Cap. Wheel 0.10 23-300-9 Screw for Mdse. Wheel Ret. & Spring to Mdse. Wheel 0.10 23-300-9A Screw for Lg. or Sm. Gum inserts to Gum Wheel 0.15 5-360-6 Screw for 5-311 Br. Holder to any Br. Holder 0.09 M-97 Nut for above 5-360-6 0.11
23-500 Coin Mechanism For Model 80 and Super 80 Series 23-500 Coin Mechanism Assy (1c, 5c, 10c, 25c, 50c) 26.65 23-500 Coin Mechanism Assy (75c, $1.00) 29.30 23-500 Coin Mechanism Parts 23-500-1 Face Plate 9.30 23-500-2 Single Coin Adaptor 2.35 23-500-3 Double Coin Adaptor 2.80 23-500-4 Single Coin Pawl (25c) 0.95 23-500-5 Double Coin Pawl (50c) 0.95 23-500-6 Coin Pawl Spring 0.45 23-500-7 Full Stroke Pawl 0.45 23-500-8 Full Stroke Pawl Spring 0.45 23-500-9 Knob & Shaft 5.00 23-500-10 Sprocket 1.95 23-500-11 Return Cam 1.35 23-500-12 Return Pawl Spring 0.55 23-500-19 Mechanism Lock Latch 0.80 23-500-22 Coin Pawl (1c, 5c, 10c) 0.80 23-500-51 Bottom Coin Pawl 1.05 23-500-52 Top Coin Pawl 1.05 23-500-54 Coin Pawl Spring 0.35 23-500 Coin Wheels 23-501-1 1c Coin Wheel 3.60 23-501-2 5c Coin Wheel 3.60 23-501-3 10c Coin Wheel 3.60 23-501-4 25c Coin Wheel 3.60 23-501-5 50c Coin Wheel 3.60 23-501-6 $1.00 Coin Wheel NET 6.50 23-501-8 75c Coin Wheel NET 6.50 (For Foreign Currency Coin Wheels Send Sample Coin. Extra Milling Charge Will Be Quoted.)
23-500 Back Plate and Parts 23-510-1A Back Plate Assy. w/return Pawl & Washer Pawl 5.20 23-510-1 Back Plate 3.95 23-510-2 Return Pawl 0.85 23-510-3 Return Pawl Rivet 0.15 23-510-4 Washer Pawl (same as 3-614-3) 0.60 23-510-5 Washer Pawl Spring (same as 3-614-4) 0.25 23-510-6 Washer Pawl Spring Retainer (same as 3-614-5) 0.25 23-500 Coin Mechanism Fasteners 23-500-13 Screw for Back Plate to Face Plate 0.15 23-500-18 Spacer Washer 0.20 23-510-3 Return Pawl Rivet 0.15 23-510-7 Thumb Screw 0.15 3-614-14 Full Stroke Pin Screw 0.15 5-360-6 Hopper Screw (for Sprocket to Knob Shaft) 0.09 5-360-6 Hopper Screw (for Washer Pawl Ret. To Back Plate) 0.09
Super 80 Sticker Machine Sticker Machine Floor, Columns, Weights, Etc. 25-100-1B Floor Assy With Columns 69.95 25-100-21 Wiper Spring 3.00 25-100-21A Wiper Spring Assy 6.20 25-100-22 Wiper Retainer 3.00 25-100-23 #6-32 x 3/8" sltd rh ms 0.07 25-100-2LA Left Column Assy 15.00 25-100-2RA Right Column Assy 15.00 25-100-6 Pull Slide Cover 10.85 25-100-7A Pull Slide Assembly 4.65 25-100-8 Column Weight 2.50 25-100-8A Weight Assembly 3.05 25-100-9 Column Weight Rivet 0.20 Sticker Machine Cash Door, Cash Box, Locks, Etc. 25-120-1 Cash Door 9.65 25-120-1A Cash Door Spot Weld Assy w/out Lock 22.80 25-120-1B Cash Door Spot Weld Assy with Lock 29.95 25-120-3 Lock Rod Retainer 1.55 25-120-4 Locking Rod 0.65 25-120-5 Locking Cam 1.10 25-130-1 S80 Sticker Cash Box 19.30 Sticker Machine Panels 25-100-4 Base Panel (same as 23-100-4) 3.70 25-130-2 Super 80 Sticker metal upper front 6.80 25-130-3 Display Panel Retainer 6.45 25-130-3A Panel Retainer 8.20 25-130-4 Super 80 Sticker clear plastic 7.85 Super 80-30" Sticker Machine Options 25-130-6 S80-30" Sticker Front Plastic 10.70 25-130-8 Upper Front Panel 30" 9.95
Super 80 Sticker Machine Sticker Machine Mechanism 25-110 V5 Super 80 Sticker Machine Dual Mechansim (V5) (Pair) 91.50 25-110 G4 Super 80 Sticker Machine Dual Mechansim (G4) (Pair) 82.85 GW-G4 G-4 50c Greenwald Coin Mechanism 44.30 GW-V5 V5 50c Greenwald Coin Mechanism 50.00 GW-V5 1KR V5 1Krona Greenwald Coin Mechanism Call GW-V5 1LO V5 1 Can Loonie Greenwald Coin Mechanism 51.45 GW-V7 5P V7 5Dom Peso Greenwald Coin Mechanism Call Sticker Machine Mechanism Parts 25-110-2 Slide Coin Mech Housing 4.20 25-110-3 Mech Housing Guide 2.05 25-110-4 Slide Actuator 3.95 25-110-5 Screws for Mech Housing Guide (Holds Slide Actuator) 0.14 25-110-6 Mech Housing Retaining Pin 0.45 25-110-13 Screw to Hold Mech Housing Guide 0.15 25-115-1 Mechanism Receiver 4.20 GW-00-8148 Greenwald Mech Return Spring 1.20 GW-27-5000 Greenwald V5 Blockout Key (Doz) 21.50 GW-27-5002 Greenwald G4 Blockout Key (Doz) 21.50 Sticker Machine Decals GW-00-9940-5 Greenwald Casting Decal G4 50c (Doz) 11.35 GW-00-9940-7 Casting Decal G4 75c (Doz) 14.20 GW-00-9945-5 Greenwald Slide Decal G4 50c (Doz) 11.35 GW-00-9945-7 Slide Decal G4 75c (Doz) 14.20
Triple Play Chute, Chute Plates, Chute Door, Center Rod T-107 Mdse. Chute 3.20 T-108 Mdse. Chute Cover 1.05 5-000-33 Mdse. Chute Door, N.W. 4.65 T-111-A Center Rod & Nut 2.05 Top, Case, Hopper, Base T-100 Case (Specify Color) 69.30 T-100-A Case w/door (Specify Color) 87.85 T-200 Hopper 12.15 T-200-1 Hopper Screw 0.16 T-201 Display Window 15.65 T-202 Upper Back Panel (Specify Color) 3.95 T-202P Upper Back Panel Plastic 1.05 T-203 Center Panel (Metal) 3.95 T-203-P Center Panel Plastic 2.60 T-204 Excap (Specify Color) 13.95 T-400-A Top w/out Lock Barrel (Specify Color) 30.70 T-400-B Top Assy w/lock Barrel (Specify Color) 32.15 T-600 Sub Base (Specify Color) 19.30 T-601 Mdse. Tray (Specify Color) 15.00 T-601-1 Mdse. Tray Screw 0.16 T-800 Cash Box 11.35 Locks, Keys, Door and Other Optional Parts 5-000-8 Lock & Key (Specify Key #) 3.95 Key Only NET 2.50 Camlock & Key (Specify Key G#) 5.00 Camlock Key Only NET 2.50 5-000-17 Lock Barrel w/nut & Washer 2.75 5-000-19 Ace Lock & Key (Specify Key#) 7.50 Ace Key Only NET 2.50 5-000-191 Protective Washer 1.60 T-103 Lower Door Lock Bracket 1.05 (used w/t-110 Door Lock) T-110 Door Lock 1.80 RH1605 Door Knob w/screw 1.35 T-112 Door ( Specify Color) 11.35 T-112-B Door Assy. (Specify Color) 18.50 2-103-3 Ace Back Door Lock 7.50 T-112-ACE Door Assy. w/ace Lock 26.45 T-112-C Cam for Ace Lock 1.05 T-113-A Door Hinge Pin Assy 3.95 T-115-A Door Lock Rod Assy. w/knob 3.55
Triple Play Wheels and Brush Housings For 750-1400ct Gum or High Bounce Balls 5-300-6ASSY RJ Wheel Assy. w/insert 5.75 T-330-H RJ-JB Br. Hsg. Assy. w/heavy Springs (Metal) 5.65 5-300-12A Deep Mdse. Wheel w/adj. 6.35 T-320 Deep Brush Hsg. Assy 6.35 For Panned Candy: Small Portions Only 5-300-9A Shallow Mdse. Wheel w/adj. 8.20 T-310 Shallow Br. Hsg. Assy 8.20 Four 1" Capsule Wheel Options (See Below) 5-300-11P-A New Plastic Capsule Wheel Assy 6.50 T-330-1P-A New Capsule Brush Housing Assy (Metal) 5.65 5-300-11A Metal Capsule Wheel Assy 7.95 T-330-L Capsule Brush Hsg. Assy with Light Springs (Metal) 5.65 5-300-11JA Metal JB Wheel Assy (P Spring) 7.85 T-330-H Capsule Brush Hsg. Assy w/ Heavy Springs (Metal) 5.65 5-300-7A 1,1.1,1.2" Capsule Wheel Assy (Metal) (3 Long Springs) 7.85 T-330-6-1A 1,1.1,1.2" Cap. Brush Hsg. Assy (Metal) 5.65 ** Ping Pong Option Not Available for Triple Play
Stand Parts TM-700 Cast Iron Base (Black) 29.40 TM-700-2 Stand Bracket 2.60 TM-701-A Column Assy 54.70 T-602 Triple Play Hardware SET 1.00 T-600-1 Screw (4 required) 0.15 T-600-2 Nut (4 required) 0.15
T-612 Coin Mechanism.Standard for Triple Play T-612 Coin Mechanism Assy (1c, 5c, 10c, 25c) 19.25 T-612DT Coin Mechanism Assy (25c Drop Thru) 19.25 T-632 Coin Mechanism Assy (2 Quarters Back to Back) 20.50 (For Foreign Currency Coin Mechanisms Send Sample Coin. Extra Milling Charge Will Be Quoted.) T-612 Coin Mechanism Parts 3-612-43 Face Plate (Plain) 4.65 3-612-3 Cam 0.85 3-612-5 Coin Pawl 0.50 3-612-6 Coin Pawl Spring 0.25 5-500-4 Sprocket 1.35 T-612 Coin Wheels 3-612-8 5c Coin Wheel 2.35 3-612-9 10c Coin Wheel 2.35 3-612-10 25c Coin Wheel 2.35 3-612-10D 25c Drop Thru Coin Wheel 2.35 Two Coin Parts 3-612-14 Two Coin Face Plt. 7.50 3-612-14F Two Coin Face Plt. Filler 0.20 3-612-35 2-25c Back-to-Back Coin Wheel 3.95 3-612-36 Top Coin Pawl 0.50 3-612-37 Bottom Coin Pawl Back-to-Back 0.50 3-612-47 Coin Pawl Spring, 2 Coins Back-to-Back 0.30 Knob and Shaft 3-612-45 Knob & Shaft 4.20 5-520-3 Knob Shaft Washer 0.13 Mechanism Latch T-109 Mechanism Lock Latch 0.95 T-109-1 Mechanism Latch Lock Spring 0.25
T-612 Coin Mechanism.Standard for Triple Play Back Plate Assembly 3-614-1C-10C Back Plate Assy (1c, 5c, 10c) 7.50 3-614-25C-50C Back Plate Assy (25c, 50c) 7.50 3-614-25cDT Back Plate Assy (25cDT) 7.50 3-614-1A Back Plate w/return Pawl 3.35 T-612 Mechanism Backplate Parts 3-614-2 Washer Pawl, 25c 0.45 3-614-3 Washer Pawl, 1c, 5c, 10c 0.60 3-614-4 Washer Pawl Spring 0.25 3-614-5 Washer Pawl Spring Ret. 0.35 3-614-8 Return Pawl 0.25 3-614-9 Return Pawl Spring 0.30 3-614-10 Rivet for Return Pawl 0.25 3-614-12STP New Full Stroke Pin 0.50 3-614-13 Full Stroke Pin Spring 0.40 3-614-20 Coin Kickout 1c, 5c, 10c 1.00 3-614-22 Coin Kickout 25c, 50c 1.00 3-614-23 Anti-Piling Spring 1.20 (not available on drop-thru mechs) T-612 Mechanism Fasteners 23-500-13 Screw for Back Plate to Face Plate 0.15 3-614-14 Screw for Full Stroke Pin Spring to Back Plate 0.15 3-614-15 Screw for Coin Kickout to Back Plate 0.15 5-360-6 Screw for Sprocket to Knob Shaft 0.09 5-360-6 Screw for Washer Pawl Retainer to Back Plate 0.09 5-512-5 Screw for Return Pawl Spring to Back Plate 0.15 (same as 3-614-11)
Pedestal Stand M-104-A Flange 5.70 M-113 Pipe 10.00 M-201 Cast Iron Base 34.00 M-800 Steel Stamped Base 29.40 Tempo Stand M-250-1AU Upper Leg Assy 14.00 M-250-1AL Lower Leg Assy 14.00 M-320-1 Black Plastic Caps 0.35 Hardware Tempo Hardware (Set) 6.00 Nuts and Screws M-98 1/4 x 20 Hex Nut 0.20 M-92 1/4-20 x 1" Hex Hd. Screw 0.25 M-94 10-32 x 1 1/2" Round Hd Screw (Shelf Brace) 0.30 M-106 1/4-20 x 1/2" Hex Hd. Screw 0.20 M-112 Set Screw 3/8 x 16 x 1/4 for NuVo 0.80
Showcase 70" (Leg Supports, Caps, Casters are same as Showcase) M-910 Machine Fastening Bracket 2.60 M-911 Tube Holding Bracket 3.35 16" Showcase 70 Stand M-921-A Back Brace, per pair 8.65 M-907 Shelf Tubing (Top or Bottom) (Each Tube) 7.30 Hardware 16" Hardware 3.30 24" Showcase 70 Stand M-922-A Back Brace, per pair 9.65 M-906 Shelf Tubing (Top or Bottom) (Each Tube) 8.00 Hardware 24" Hardware 3.70 30" Showcase 70 Stand M-314-A Back Brace, per pair 10.60 M-905 Shelf Tubing (Top or Bottom) (Each Tube) 8.65 Hardware 30" Hardware 3.95 Showcase Stand (4, 6, 8) M-307 Top Shelf - 4 Machines 9.00 M-308 Bottom Shelf - 4 Machines 9.00 M-301 Top Shelf - 6 Machines 10.00 M-302 Bottom Shelf - 6 Machines 10.00 M-310 Brace - 4 Machines (Pair) 8.65 M-310-A Back Brace - pair w/screw & nut - 4 Machine 9.00 M-306 Brace - 6 Machines (Pair) 9.65 M-306-A Back Brace - pair w/screw & nut - 6 Machine 10.00 M-330 Leg 22.00 Hardware 4 Showcase 4 Hardware 3.30 Hardware 6 Showcase 6 Hardware 3.70 Caps and Casters M-320-1 Black Plastic Caps 0.35 M-320-3A Push-Up Casters w/inserts (4 per set) 8.75 M-320-4 Caster Insert Only 0.40
Square Deal Stand M-270-1A Leg/End Support 28.65 M-270-10 Stand Cap 0.35 M-270-11 Insert for Casters 1.15 HDWE SQ DEAL Hardware 6.60 M-912 Machine Fastening Bracket 2.60 Back Braces M-270-12 Square Deal 4 Back Brace (Pair) 14.60 M-270-13 Square Deal 5 Back Brace (Pair) 15.95 M-270-14 Square Deal 7 Back Brace (Pair) 17.25 M-922 Square Deal 9 Back Brace (4) 22.00 Shelf Assy M-270-6A Square Deal 4 Shelf Assembly 16.65 M-270-7A Square Deal 5 Shelf Assembly 18.00 M-270-8A Square Deal 7 Shelf Assembly 19.30 M-270-9A Square Deal 9 Shelf Assembly 20.65
J Stand...Silver Sentinel and Hi-Five J-100-1A J Stand Leg Assy Hi Five 52.50 J-103-1A J Stand Leg Assy Hi Five Short 52.50 J-102-1A J Stand Leg Assy Silver Sentinel 73.25 J-104-1A J Stand Leg Assy Silver Sentinel Short 73.25 M-2106 Top and Bottom Shelf for Silver Sentinel 6 (each) 26.00 M-2106-A Top and Bottom Shelf for Silver Sentinel 6 (pair) 50.00 M-2108 Top and Bottom Shelf for Silver Sentinel 8 (each) 28.75 M-2108-A Top and Bottom Shelf for Silver Sentinel 8 (pair) 52.75 NuVo Stand M-2101-3 Base Foot (per foot) 7.00 Casters and End Caps M-2102-12A Caster for Silver Sentinel and Square Deal (4) 19.00 M-340-2 Chrome End Closures for Silver Sentinel 0.40 M-340-4 Cross Bar End Caps for J Stand 0.40 M-340-5 Threaded Enclosure for Side Mounts 1.15 M-340-9 New Threaded Enclosure for Side Mounts 1.60 Pro Stand Parts 30-700 22" Chrome Base w/ 2 rims (4) 88.25 30-700-1 Chrome Trim 69.5" 10.75 30-700-3 Pipe 23.25 30-700-3A Pipe and Flange Assembly 32.25 30-700-4A Pro Stand Pipe Assembly w/welded top 36.65