New Low Noise Amplifiers & High Power PIN Diode Switches

Similar documents
MASW T. HMIC TM PIN Diode SP2T 13 Watt Switch for TD-SCDMA Applications. Features. Functional Diagram (TOP VIEW)

TQP4M3019 Data Sheet. SP3T High Power 2.6V 2x2 mm CDMA Antenna Switch. Functional Block Diagram. Features. Product Description.

CMOS 5GHz WLAN a/n/ac RFeIC WITH PA, LNA, AND SPDT

Delivering Dependable Performance... A Spectrum of Radar Solutions

Product Description. Ordering Information. GaAs HBT GaAs MESFET InGaP HBT

RF Switches Guide Signals In Smart Phones

SKY LF: 20 MHz-3.0 GHz High Power SP4T Switch With Decoder

GaAs Switch ICs for Cellular Phone Antenna Impedance Matching

PIN and Limiter Diodes

MADP T. Non Magnetic MELF PIN Diode

Symbol Parameters Units Frequency Min. Typ. Max. 850 MHz

NBB-402. RoHS Compliant & Pb-Free Product. Typical Applications

Broadband covering primary wireless communications bands: Cellular, PCS, LTE, WiMAX

DC to 30GHz Broadband MMIC Low-Power Amplifier

SKY LF: GHz Two-Way, 0 Degrees Power Divider

A 1 to 2 GHz, 50 Watt Push-Pull Power Amplifier Using SiC MESFETs. high RF power. densities and cor- capacitances per watt.

RF Communication System. EE 172 Systems Group Presentation

Application Note SAW-Components

Broadband covering primary wireless communications bands: Cellular, PCS, LTE, WiMAX

Heterojunction Bipolar Transistor Technology (InGaP HBT) Broadband High Linearity Amplifier

Typical Performance 1. IS-95C ACPR dbm WCDMA ACLR dbm

Wireless Communication and RF System Design Using MATLAB and Simulink Giorgia Zucchelli Technical Marketing RF & Mixed-Signal

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

SKY LF: 0.5 to 6.0 GHz SPDT Switch, 50 Ω Terminated

0HDVXULQJWKHHOHFWULFDOSHUIRUPDQFH FKDUDFWHULVWLFVRI5),)DQGPLFURZDYHVLJQDO SURFHVVLQJFRPSRQHQWV

Skyworks Solutions, Inc. Corporate Overview

BITxxPA. RF Power Amplifier. Applications. Product Description. Key Features

Parameter Min. Typ. Max. Units. Frequency Range GHz. Minimum Insertion Loss db. Dynamic 38 GHz 26 db

23-26GHz Reflective SP4T Switch. GaAs Monolithic Microwave IC in SMD leadless package

PGA103+ Low noise, high dynamic range preamp for VHF and UHF

SKYA21012: 20 MHz to 6.0 GHz GaAs SPDT Switch

Product Datasheet P MHz RF Powerharvester Receiver

MITSUBISHI RF MOSFET MODULE RA07H4047M

Monolithic Amplifier PMA2-43LN+ Ultra Low Noise, High IP3. 50Ω 1.1 to 4.0 GHz. The Big Deal

Introduction to Receivers

GaN High Power Amplifiers: Optimal Solutions Addressing Pico to Macro BTS Demands

Application Note Noise Frequently Asked Questions

MHz High Dynamic Range Amplifier

The front end of the receiver performs the frequency translation, channel selection and amplification of the signal.

Silicon Schottky Barrier Diode Bondable Chips and Beam Leads

MASW TB. GaAs SPST Switch, Absorptive, Single Supply, DC-4.0 GHz. Features. Pin Configuration 1,2,3,4. Description. Ordering Information

MASTR III RF Package, VHF

Curriculum and Concept Module Development in RF Engineering

Design Considerations for RF Energy Harvesting Devices

How To Use A Sound Card With A Subsonic Sound Card

AN Single stage 5-6 GHz WLAN LNA with BFU730F. document information

Features. Applications. Transmitter. Receiver. General Description MINIATURE MODULE. QM MODULATION OPTIMAL RANGE 1000m

SPECIFICATION. MAT.03A Embedded Active GPS and Cellular Antenna Assembly and Reference Board

TQP W, DC to 4 GHz, GaN Power Transistor

MEASUREMENT UNCERTAINTY IN VECTOR NETWORK ANALYZER

Avaya WLAN 9100 External Antennas for use with the WAO-9122 Access Point

VCC1,2. H/L Lin. Bias, Enable, Detector Circuits

How To Make A Power Amplifier For A Mobile Phone

TowerJazz High Performance SiGe BiCMOS processes

S-PARAMETER MEASUREMENTS OF MEMS SWITCHES

APPLICATIO S TYPICAL APPLICATIO. LTC kHz to 1GHz RF Power Detector FEATURES DESCRIPTIO

VJ 6040 Mobile Digital TV UHF Antenna Evaluation Board

New GaN FETs, Amplifiers and Switches Offer System Engineers a Way to Reduce RF Board Space and System Prime Power

Amplifier for Small Magnetic and Electric Wideband Receiving Antennas (model AAA-1B)

SA605 High performance low power mixer FM IF system

UNDERSTANDING NOISE PARAMETER MEASUREMENTS (AN )

A CW QRP Transceiver for 20 m band. How it works I'll describe individually the three boards and the relative tuning devices.

FEATURE ARTICLE. Figure 1: Current vs. Forward Voltage Curves for Silicon Schottky Diodes with High, Medium, Low and ZBD Barrier Heights

Case Study Competition Be an engineer of the future! Innovating cars using the latest instrumentation!

Choosing the Right RF Switches for Smart Mobile Device Applications

UGF W, 1 GHz, 26V Broadband RF Power N-Channel Enhancement-Mode Lateral MOSFET

GHz Frequency Multiplier. GaAs Monolithic Microwave IC. Output power (dbm)

OMNIYIG. .5 TO 2 GHz, 1 TO 4 GHz, 6 to 18 GHz Thin Film YIG-TUNED OSCILLATORS OUTLINE DIMESIONS MOUNTING SURFACE GND +15V + TUNE - HTR HTR

LAP NODO ÓPTICO 2/4 SALIDAS WT-8604JL

Optimizing IP3 and ACPR Measurements

DRM compatible RF Tuner Unit DRT1

SKY : WLAN b, g, n Intera Front-End Module

BIPOLAR ANALOG INTEGRATED CIRCUIT

SiGe:C Low Noise High Linearity Amplifier

In 3G/WCDMA mobile. IP2 and IP3 Nonlinearity Specifications for 3G/WCDMA Receivers 3G SPECIFICATIONS

APPLICATION NOTES POWER DIVIDERS. Things to consider

Kit Watt Audio Amplifier

NEW MICROWAVE APPLICATIONS FOR THICK FILM THERMISTORS

Build your own solution with UMS

Model GS Port Node 1 GHz with 40/52 MHz split

DATA SHEET. SiGe LOW NOISE AMPLIFIER FOR GPS/MOBILE COMMUNICATIONS. Part Number Order Number Package Marking Supplying Form

TGF3015-SM. Applications. Product Features. Functional Block Diagram. General Description. Pin Configuration

MANUAL FOR RX700 LR and NR

MRF175GU MRF175GV The RF MOSFET Line 200/150W, 500MHz, 28V

S-Band Low Noise Amplifier Using the ATF Application Note G004

DATA SHEET SE5512L: Dual-Band a/b/g/n Wireless LAN Front-End Preliminary Information. Product Description. Applications.

Visual System Simulator White Paper

MAX14760/MAX14762/MAX14764 Above- and Below-the-Rails Low-Leakage Analog Switches

APN1001: Circuit Models for Plastic Packaged Microwave Diodes

DATA SHEET SE2425U : 2.4 GHz Bluetooth Power Amplifier IC. Applications. Product Description. Features. Ordering Information

AT Up to 6 GHz Low Noise Silicon Bipolar Transistor

AN BGU8009 Matching Options for 850 MHz / 2400 MHz Jammer Immunity. Document information. Keywords

Design and Analysis of Integrated RF Front-end Transceiver System Using Printed Circuit Technology for 5 GHz Wireless Communication Applications

XX1007-QT-EV1. Doubler / GHz. Features. Functional Block Diagram. Description. Pin Configuration. Absolute Maximum Ratings

APN1009: A Varactor Controlled Phase Shifter for PCS Base Station Applications

Mobile Phone Testing using Impedance Tuners

RF IF. The World Leader in High-Performance Signal Processing Solutions. RF Power Amplifiers. May 7, 2003

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

NPN wideband silicon germanium RF transistor

DISCRETE SEMICONDUCTORS DATA SHEET. BFQ34 NPN 4 GHz wideband transistor. Product specification File under Discrete Semiconductors, SC14

Transcription:

New Low Noise Amplifiers & High Power PIN Diode Switches 1

Skyworks At A Glance Skyworks Solutions, Inc. is a vertically integrated provider of high performance analog and mixed signal semiconductors enabling wireless connectivity. Headquarters: Woburn, Massachusetts USA Web site: www.skyworksinc.com NASDAQ listing: SWKS Employees: 4500 Sales: $1.5 B+ USD Primary Manufacturing Operations Woburn MA Silicon RF Diode & GaAs PHEMT Fab Newbury Park CA GaAs HBT Fab Mexicali Mexico Assembly and Test TM 2

Our RF Semiconductor Business Amplifiers /LNA Diodes /n RF Subsystems Synthesizers LN A 0 90 Mod/Demod Front End Modules Switches Attenuators RF IF LO Mixers Phase Shifters Enabling the Wireless World Through a Diverse Portfolio of Analog Solutions 3

Broad Market Products: Low Noise Amplifier s Paul Taylor Product Marketing Manager 4

Low Noise Amplifier Portfolio Overview Large Portfolio of Discrete Broadmarket Amplifier Products Broad Frequency Coverage:.03 6.0 GHz, pin compatible family based solutions Ultra Low Noise Figure: Low as 0.5 db Wide Amplification Range: 12 38 db High Linearity Designs: 40 dbm OIP3 High Output Power Designs: 24 dbm OP1dB Low Current/Voltage Designs: V DD 1.8 5.0V, I DD 5 ma - 15 ma Small Industry Standard Footprints & Matching Circuit Layouts Dedicated LNA Applications Engineering team to assist with design customization Skyworks Amplifiers Support Hundreds of Cellular Infrastructure, Military, GPS, WLAN & General Purpose ISM Band Applications Globally - in a variety of configurations. 5

Sub 1.0 db NF ISM Band Low Noise Amplifiers High Performance Low Noise Amplifiers are employed in the front end of a wireless receiver to enhance: Sensitivity Selectivity Dynamic Range Skyworks now offers a full family of Highly Flexible Low Power LNA s to service the growing ISM Band TRX market SKY67015-396LF SKY67012-396LF SKY67013-396LF SKY67014-396LF 30 300 MHz 300 600 MHz 600 1500 MHz 1500 3000 MHz 6

ISM Band phemt LNA Family Overview Wide operating frequency range: 30 3000 MHz coverage Low noise figure: <1.0dB Enhances receiver sensitivity High gain: 12.5-16.5 db Extends receiver reception range High linearity: OIP3 ~25 dbm @ 15 ma. Improves selectivity and sensitivity Low supply current options: 15mA 5mA range Long battery life Wide supply voltage range: 1.8 to 5.0 V High level of design flexibility Stabile Operation: µ1 & µ2 >1.0 Unconditional stability over -40C to +85C Simple external matching/bias network: 9 inexpensive passive components Small form factor: 2 x 2 mm DFN All four LNAs are pin & layout compatible 7

ISM Band phemt LNA Family Performance SKY67013-396LF S-parameter & Noise Figure Data @ 3.3V/15 ma 8

ISM Band phemt LNA Family Performance Flexible Biasing & Matching Capabilities Adjustment of single external resistor (R1) allows the designer to optimize the tradeoff between supply current/voltage and amplifier linearity/output power 9

ISM Band phemt LNA Family Summary High level of RF performance and supply flexibility, in small cost effective form factor enabling enhanced receiver sensitivity, selectivity & battery life. Ideal for General Purpose Cellular, ISM, L band & VHF/UHF apps. such as AMR, Public Safety/Land Mobile Radio, Bluetooth, Femto/Pico Cell & Wireless Sensors. Samples and evaluation boards available through our distribution partner Richardson RFPD. De-embedded S-Parameters, ADS design files, Gerber files and our Applications Engineering team is available to aide in your design effort. For more information on our complete LNA product portfolio, please visit http://www.skyworksinc.com/ 10

High Power PIN Diode Switches David Seed Product Marketing Manager 11

Markets / Applications Markets Applications Products Infrastructure Military/Microwave Radios Failsafe Switching T / R Switching 50 & 100 + Watt Radio Applications 20 MHz 4.0 GHz SMP1302-085LF SMP1324-087LF SKY12207-478LF SKY12208-478LF SKY12210-478LF 12

New High Power Series and Shunt Packaged PIN Diodes PIN Diodes for high power T/R switch applications Low loss, high power switching Low distortion attenuators Features SMP1324-087LF: Suitable for 35 W CW T/R switches SMP1371-087LF: Suitable for 25 W CW T/R switches SMP1345-087LF: Lowest capacitance SMP1302-085LF: 100W CW Shunt configuration Low thermal resistance packaging Lower cost compared to ceramic MELF Many designs are available J1 C1 Shipping in Volume!! I CTRL1 L1 D1 RF common C2 L2 D2 I CTRL2 L3 C3 Typical Applications Circuit J2 Need for up to 100 Watts in High Power Switching Applications; Target LMR, Infrastructure (LTE) and Mil Comm and all other High Power T/R Applications 13

50 Watt SPDT PIN Diode Switch SKY12207-478LF Part Number Freq. (GHz) Size (mm) Ins Loss (ANT to TX) @ 2.6 GHz Isolation (ANT to RX) @ 2.6 GHz VSWR (@2.5GHz) Max Rating CW RF Ant-TX Input Power @ 25C Base plate (28 V) Max CW Ant-TX Input Power @ 85C Base Plate (28 V) SKY12207-478LF 0.9 4.0 4 x 4 0.4 db typ. 42 db 1.25:1 max 50W 33W Description The New SKY12207-478LF broadband high power handling, high linearity, Single- Pole Double-Throw (SPDT) T/R switch is one in a series of High Power Switches. Key Features Low insertion loss; 0.4dB High isolation; 42dB High IIP3; +55dBm RF Power handling; 50W CW Control voltages; 0/5 V and 0/28 V Applications Failsafe receiver protection for TDD-LTE and UMTS base stations T/R Switch for TDD-LTE, TD-SCDMA and UMTS base stations In Production 14

100 Watt SPDT PIN Diode Switch SKY12210-478LF Part Number Freq. (GHz) Size (mm) Ins Loss (ANT to TX) @ 2.6 GHz Isolation (ANT to RX) @ 2.6 GHz VSWR (@2.5GHz) Max Rating CW RF Ant-TX Input Power @ 25C Base plate (28 V) Max CW Ant-TX Input Power @ 85C Base Plate (28 V) SKY12210-478LF 0.9 4.0 4 x 4 0.5 db typ. 44dB 1.25:1 max 100W 50W Description The New SKY12210-478LF broadband high power handling, high linearity, Single- Pole Double-Throw (SPDT) T/R switch is ideal for very high Power Switching. Key Features Low ANT-RX insertion loss; 0.5dB High isolation; 44dB High IIP3; +55dBm RF Power handling; 100W CW Control voltages; 0/5 V and 0/28 V Applications Failsafe receiver protection for TDD-LTE and UMTS base stations T/R Switch for TDD-LTE, TD-SCDMA and UMTS base stations In Production 15

50 Watt SPDT PIN Diode Switch SKY12208-478LF 0.02-2.7 GHz 50 Watt High Power Silicon PIN Diode T/R SPDT Switch Applications: Transmit/receive switching and failsafe switching in land mobile radios, public safety radios and military UHF/VHF communications systems. High power handling: 50 W CW Low insertion loss: 0.4 db typical 43 db isolation ANT-RX isolation at 500 MHz Controlled with positive power supply Symmetrical common to output port configuration External tuning capable for high or low band operation Samples Available 16

Family of High Power T/R Switches (50W,100W, and 200W) Part Number Freq. (GHz) Size (mm) Function Ins Loss (ANT to TX) @500 MHz @ 2.6 GHz Isolation (ANT to RX) @500 MHz @ 2.6 GHz Max Rating CW RF Ant-TX Input Power @ 25C Base plate (28 V) Max CW Ant-TX Input Power @ 85C Base Plate (28 V) Status SKY12207-306LF 0.9 4.0 4 x 4 SP2T 0.4 db typ. 39 db 50W 33W In production SKY12208-306LF 0.02 2.7 4 x 4 SP2T 0.3 db typ. 39 db 50W 33W In production SKY12207-478LF 0.9 4.0 4 x 4 SP2T 0.4 db typ. 43 db 50W 33W In production SKY12208-478LF 0.02 2.7 4 x 4 SP2T 0.3 db typ. 43 db 50W 33W Release June SKY12209-478LF 0.9 4.0 4 x 4 SP2T 0.4 db typ. 42 db Symmetrical 40W 31W Release June SKY12210-478LF 0.9 4.0 4 x 4 SP2T 0.5 db typ. 44 db 100W 50W In production SKY12211-478LF 0.02 2.7 4 x 4 SP2T 0.3 db typ. 45 db Symmetrical 40W 31W Release June SKY12212-478LF 0.02 2.7 4 x 4 SP2T 0.3 db typ. 45 db 100W 50W Sept 2012 17

Driver Circuit for High Power SPDT Switches Driver Circuit App Note and Evaluation Boards are Available 18

High Power Switch Family Summary This series of Integrated 50 & 100 Watt Switches provide Excellent Power Handling and Isolation with Broadband performance from 20 MHz- 4 GHz. The Combination of Very Low Insertion Loss (.4 db) of these switches in the antenna to Rx mode minimizes the affect on receiver noise figure. Ideal for Failsafe Switching in TDD-LTE Base Station, Repeater, UHF/VHF Radio, Public Safety/Land Mobile Radio and General purpose High Power TR Switching applications. Samples and evaluation boards available through our distribution partner Richardson RFPD, local Representatives or direct from Skyworks For more information on our complete Diode and Switch product portfolio, please visit http://www.skyworksinc.com/ 19