MOTORBOAT COMPONENTS AND SPARE PARTS

12 ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS, HOSES, CLAMPS MUFFLERS, EXHAUSTS JERRYCANS, TANKS, TANK S VENTS, PRIMER BULB, ENGINE CONNECTOR LUBRIFICANTS, GREASE, ADDITTIVIES ANODES BUSHING, ANTIVIBRATION ELASTIC SUPPORT IMPELLERS TRASMISSION BELLOWS, COUPLING SLEEVES SPAK PLUGS SECURITY KEY, FORKS, OUTBOARD MOTOR BAGS SPOILERS FOR OUBOARD MOTORS PROPELLERS TRANSOM PROTECTIONS MOTOR BRACKETS, STANDS AND CARRIERS FOR OUTBOARD ENGINE ELECTRIC BLOWERS, AIR SUCTIONS, VENTILATION HOSES CONTROL BOXES, ACCESSORIES ENGINE CONTROL CABLES, ACCESSORIES MECHANICAL STEERINGS, CABLES, ACCESSORIES HOSES, BUSHES, CABLE STEERING GROMMETS, STEERING QUARTERDECKS HYDRAULIC STEERINGS, ACCESSORIES, STEERING WHEELS TRIM TABS, ACCESSORIES SELF-ADHESIVE LETTERS, NUMBERS LUBRICANTS, CLEANERS, PROTECTIVES SOUND ABSORBING AND INSULATING, ACCESSORIES Pag. Pag. Pag. Pag. Pag. Pag. Pag. Pag. Pag. Pag. Pag. Pag. Pag. Pag. Pag. Pag. Pag. Pag. Pag. Pag. Pag. Pag. Pag. Pag. 488 513 415 524 529 569 571 596 599 600 601 602 609 610 613 614 621 625 628 631 644 648 649 651

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS Universal filter Plastic Fuel filters, for outboard motors. Paper cartridge. Hose connect.. Ø mm. 6/8 Filter Plastic Fuel filters, for outboard motors. Paper cartridge for Honda, Yamaha, Mercury (R.O. 35816296), O.M.C. (O.R. 388319), Suzuki (O.R. 3852224). Hose connect. Ø mm. 6/8 Filter Plastic Fuel filters, for outboard motors. Paper cartridge for Honda (O.R. 16900, SAO 901-903) 4 T. Hose connect. Ø mm. 8 Filter Plastic Fuel filters, for outboard motors. Paper cartridge for Honda (O. R.16900, SR3 004). Hose connect. Ø mm. 8 19.15101 Filter 19.15102 Filter 19.15104 Filter 19.15105 Filter Universal filter Plastic fuel filters for outboard motors. Stainless steel cartridge. Spare cartridge for O.M.C. (O.R.983870), Mercury (O.R. 3553336) Universal filter Plastic fuel filters for outboard motors. Stainless steel cartridge. Hose connect. Ø mm. 6/8 Universal filter Plastic fuel filters for outboard motors. Stainless steel cartridge. Hose connect. Ø mm. 8 19.15103 Filter 19.11402 Filter 19.11404 Filter Filter Plastic fuel filters for outboard motors. Stainless steel cartridge. Small type. Hose connect. Ø mm. 6/8 Filter Plastic fuel filters for outboard motors. Stainless steel cartridge.large type. Hose connect. Ø mm. 8/10 Universal in line filter Plastic fuel filters for outboard motors. Stainless steel cartridge. Hose connect. Ø mm. 6/8/10 19.19108 Filter 19.19110 Filter 19.19105 Filter Purifying filters Separator gasoline filter, black die cast aluminium bracket. For Mercruiser, OMC, Volvo and all gasoline engines. Hose connections 3/8 x 10. Dims. mm. 145x110x110. Purifying filters Separator gasoline filter with black die cast aluminium bracket. Equipped with cartridge Racor S3213/3220 and transparent bowl with draining plug. Capacity 114 l./h. Hose connections 3/8 x 10. Dims. mm. 230x110x110. 19.11300 Purifying filters 20.20536 Spare filter cartridge. Ø mm 92, h 98 mm. Rif. or. 35-604941 19.11330 Purifying filters 19.11340 Spare cartridge. 488 Motorboat components and spare parts - Separator filters, filters

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS Pre-filters Mercury Type Pre-filters gasoline with support cast alloy painted black. Complete with filter, 2 hose Ø 8 mm., 2 plugs. Dim. mm. Ø=92, H=150, width 105 Pre-filters OMC Type Pre-filters gasoline with support cast alloy painted black. Complete with filter, 2 hose Ø 8 mm., 2 plugs. Dim. Ø mm. 92 x 155 h, sporg. 105. 19.14550 Pre-filters complete 19.14551 Spare filters 10 micron (rif. or. 35-604941) 19.14553 Pre-filters complete 19.14554 Spare filters 10 micron (rif. or. 502905) Pre-filter water separator fuel Cast alloy black painted support. Complete with cartridge, transparent bowl with drain, 2 hose Ø 10 mm. 2 caps. Universal for all types of engine. Pre-filter Mercury Type Dims. Ø mm. 92x236 h, width 105 Prefiltro Yamaha Dim. Ø mm. 92x280h, width. 105 H H 19.14564 Transparent bowl parts 19.14568 Replacement cartridge 10 micron Ø 19.14573 Pre-filter Mercury complete 19.14564 Transparent bowl parts 19.14768 Replacement cartridge 10 micron Ø 19.14773 Pre-filter Yamaha complete Pre-filter Yamaha Type Flow rate 115lt/h. Dim. Ø mm. 76x240h, width 90 Pre-filter Portata 227 lt/h, Dim. Ø mm. 92 x 230 h, width 110 H 19.14865 Replacement cartridge 10 micron (interc. with Racor S3227) H Ø Ø 19.14964 Transparent bowl parts 19.14968 Replacement cartridge 10 micron 19.14973 Pre-filter Yamaha complete 19.14866 Pre-filter complete 19.14564 Transparent bowl parts Motorboat components and spare parts - Separator filters, filters 489

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS Separator filter PFG 11 Easy removable cartridge, stainless steel 120 micron net. Transparent glass bowl for easy inspection. Optimum capacity 90 l/h. Max. 270 l/h. Hose connection. Ø mm. 8. Filter PFG 16 for unleaded fuel engines. 10 micron paper cartridge, easily removable. Transparent glass bowl for easy inspection. Optimum capacity 200 l/h. Max. 300 l/h. Hose connections 1/ 4. Dims. mm. 100 x 100 x 200. Spare bowl 19.19125 Trasparent 19.19126 Black metal 19.19152 Prefilter 19.19153 Spare filter cartridge 19.19116 Prefilter 19.19117 Spare filter cartridge Filter PFG 16 with water indicator for unleaded fuel engines. 10 micron paper cartridge, easily removable. Transparent glass bowl for easy inspection. Optimum capacity 200 l/h. Max. 300 l/h. Hose connections 1/ 4. Dim. mm. 100 x 100 x 200. Separator filter PFG 17 for diesel. 150 micron stainless steel net cartridge, suitable for all small engines. Optimum capacity 250 l/h. Max. 500 l/h. Hose connections 1/4 Dims. mm. 100 x 100 x 200. Spare bowl 19.19125 Trasparent 19.19126 Black metal 19.19118 Prefilter 19.19117 Spare filter cartridge 19.19122 Prefilter 19.19124 Spare filter cartridge Separator filter PFG 17/T for gasoline or diesel. 150 micron stainless steel net filter cartridge. Transparent bowl for easy inspection. Optimum capacity 250 l/h. Max. 500 l/h, stainless steel fireproof body. Rina approval dip. 14/94. Hose connections 1/ 4. Separator filter PFG 20 for diesel or gasoline with 150 micron stainless steel net filter cartridge, for all medium engines. Dims. mm. 100 x 120 x 235. Spare bowl 19.19125 Trasparent 19.19126 Black metal 19.19120 Separator filter 19.19124 Spare filter cartridge 19.19130 Prefilter 19.19131 Spare filter cartridge Separator filters for diesel. Varnished aluminium body. The bowl is built in high resistant material and transparent for easy inspection.80 micron s.s. filter cartridge. The spin-on flow provide a separation from fuel of also smallest contaminants and water. Article Mod. Hose Ø Capacity l/h Dims. mm. l x d x h Water sensor 19.19135 PFG21WS 3/8 600-1100 yes 130 x 130 x 19.19154 PFG21V 3/8 600-1100 no 315 19.19142 PFG23V 1/2 900-1900 no 19.19135 Prefilter 19.19142 Prefilter 19.19154 Prefilter 19.19136 Spare filter cartridge in stainless steel 490 Motorboat components and spare parts - Separator filters, filters

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS Separator filter with stainless steel filter cartridge, transparent bowl for easy inspection. Suitable for in-board and out-board engines. Hose connections 1/4. Dims. 130 x 80 x 60. Separator filter for diesel with stainless steel filter cartridge. Transparent bowl for easy inspection. Supplied with a draining plug. Capacity max 100 l/h. Hose connections 1/4, Dims. 180 x 95 x 90. 19.19617 Prefilter 19.19618 Spare filter cartridge 19.19698 Pre-filter 19.19699 Spare filter cartridge Purifying filter Fuel / Gasoline, cast light alloy with draining plug. Capacity 50 l./h. Hose connections 1/4, Dims. mm. 190x100. Separator filter same as art. 19.19221/2, equipped with hand pump for filling line and draining plug. 19.19221 Aluminium bowl 19.19222 Glass bowl. Recommended only for diesel 19.19231 Aluminium bowl 19.19232 Glass bowl. Recommended only for diesel Spare for art. 19.19221/222 20.20541 Filter cartridge 19.19233 Glass bowl 19.19234 Aluminium bowl Spare for art. 19.19231/232 20.20541 Filter cartridge 19.19233 Glass bowl 19.19234 Aluminium bowl Purifying filter Fuel / Gasoline-cast light alloy, complete with an interchangeable filter screwed. Capacity 100 l. / H. Complete with connections from 1/4 x Ø mm. 8. Purifying filter as 19.19228 Complete with hand pump for filling the circuit 19.19228 Prefilter 20.20561 Spare filter cartridge 19.19238 Prefilter 20.20561 Spare filter cartridge Connections for 19.19617/698/221/222/231/232/238 19.19311 Kit N. 2 hose connections 14x1,5 mm. Ø 8 mm. N. 2 copper gaskets Connections for 19.19617/698/221/222/231/232/238 Kit contains : N. 2 bolts Ø 14x1,5 mm. N. 2 swivel connections, N. 4 copper gaskets for art. 19.19698/221/22 19.19312 Kit contains: N. 1 bolt, N. 2 hose connections Ø mm. 8, 3 copper gaskets. 19.19308 Hose connect Ø mm. 8 19.19310 Hose connect Ø mm. 10 Motorboat components and spare parts - Separator filters, filters 491

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS Separator filters water/diesel ISO 10088, Rina and US Coast Guard flow lt./h Female Weight Article Model Height mm. Width mm. Depth mm. approved. Equipped with M/F hose connections. continous max connector Kg. 19.21500 500 MA 180 227 3/8 292 147 122 1,7 19.21900 900 MA 241 270 1/2 432 152 178 2,7 19.21000 1000 MA 540 681 1/2 559 152 178 4,5 19.21000 Filter 19.21900 Filter 19.21500 Filter Spre filter 30 micron spare filter cartridge recommended for first filtration. Pack. da 12 pcs. Junction M/F Connecction for Racor filters. Sensor alarm water Thread Ø mm. 13 19.21130 for 500 MA male 5/8 - female 3/8. For hose connect. art. 18.18302/303/313 19.21010 Mod. 500 MA for art. 19.21500 19.21040 Mod. 900 MA for art. 19.21900 19.21020 Mod. 1000 MA for art. 19.21000 19.21131 For 900/1000 MA male 7/8 - female 1/2. For hose connect. art. 18.18304/305/316 19.21069 for 500 MA 19.21064 for 900-1000 MA ORIGINAL RACOR CARTRIDGE Cartridge S3213/3220 capacity 227 Lt/h,10 micron Cartridge S3227 capacity 227 Lt/h, 10 micron Cartridge S3232 capacity 454 Lt/h, 10 micron Cartridge R12P capacity 57 Lt/h, 30 micron 19.11340 Cartridge 19.11341 Cartridge 19.11342 Cartridge 19.11343 Cartridge Cartridge R20P capacity 114 Lt/h, 30 micron Cartridge R24P capacity 114 Lt/h, 30 micron Cartridge R26P capacity 170 Lt/h, 30 micron 19.11344 Cartridge 19.11345 Cartridge 19.11346 Cartridge 492 Motorboat components and spare parts - Separator filters, filters

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS Spin-on oil filters for 4-stroke outboard Article Original reference HP D1 D2 D3 H EVINRUDE - JOHNSON 20.20636 778885-5031411 25-30-40-50-60-70 65 3/4' - 16 62 50 20.20637 434839 10-15 65 3/4' - 16 62 60 20.20638 778888-5035703 200-225 65 3/4' - 16 62 90 HONDA 20.20534 15400-POH-305PE, 15400-POH-305, 15400-ZJI-004, 15400-PLM-A01PE 75-90-115-130 84 M20X1,5 63 84 20.20641 15400-PFB-004, 15400-PFB-014,15400-ZW4-003, 15400-PFB-007 8-9,9-20-25-30-35-40-45-50 68 M20x1,5 61 73 20.20642 15400-RBA-F01 80-130 68 M20x1,5 61 87 MERCURY 20.20510 35-866340Q03 95 13/16-16 90 78 20.20520 VERADO ALCUNI 76 3/4' - 16 71 90 20.20640 35-822626Q2/ Q04 25-30-40-45-50-60-75-80-90-115 68 M20X1,5 61 63 20.20642 35-877768K01 40-60 EFI 4T 68 M20x1,5 61 87 20.20646 35-822626T7 / 35-822626Q15 225 78 3/4' - 16 72 78 20.20659 35-877761Q01 / 35-877761K01 VERADO - 75/90/115 91 M22x1.5 81 SELVA 20.20640 UP TO 80 68 M20X1,5 61 63 20.20641 5GH-13440-00 9,9/115 68 M20X1,5 61 73 SUZUKI 20.20510 3852412-502902 95 13/16-16 90 78 20.20636 16510-87J00 25-30-40-50-60-70 65 3/4' - 16 62 50 20.20638 16510-93J00 150-175-200-225-250 65 3/4' - 16 62 90 YAMAHA 20.20510 YSC1323120C 95 13/16-16 90 78 20.20640 5GH-13440-20 9,9-100 68 M20X1,5 61 63 20.20641 5GH-13440-00 9,9-15-25-30-40-60-75-90-100-115 68 M20X1,5 61 73 20.20642 N26-13440-00 225 68 M20x1,5 61 87 20.20646 69J-13440-00 150-200-225-250 78 3/4' - 16 72 78 TOHATSU 20.20640 3R007-6150M 9-8-30 68 M20X1,5 61 63 20.20642 68 M20x1,5 61 87 Spin-on petrol filters for sterndrive engines Article Original reference D1 D2 D3 H OMC (EVINRUDE - JOHNSON) 20.20644 502905 93 1-1/2 72 108 20.20660 502906 76 13/16-16 70 85 MERCURY - MERCRUISER 20.20536 35-60494-1 35-807172 93 11/16-16 72 98 VOLVO 20.20536 855686-2 93 11/16-16 72 98 20.20660 3852413.8 76 13/16-16 70 85 YAMAHA 20.20536 ABA-FUELF-IL-TR / ABB-FUELF-IL-TR 93 11/16-16 72 98 Motorboat components and spare parts - Separator filters, filters 493

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS AIFO - MOT.LOMBARDINI SERIE 4000 Original ref. Type Code 4021-M17-4031-M25 2175107 FO 20.20626 2175045 FG 20.20562 2175105 FA 20.20629 4041-M33 2175130 FO 20.20567 2175045 FG 20.20562 414-M41-414-SMR82-4241-M41 2175104 FO 20.20560 2175046 FG 20.20553 2175119 FA 20.20630 UNO-M20-M40 FO 20.20508 FG 20.20561 8140-8141M-8141SM FO 20.20505 CG 20.20541 8140 dal 5/83 FO 20.20504 CG 20.20541 Motor Filters Air - Gasoline - Diesel - Oil Legend: FO = Oil filter, screw mounting FG = Fuel filter, screw mounting FB = Gasoline filter FA = Air filter FW = Water filter CO = Oil cartridge CB = Gasoline cartridge CG = Diesel cartridge 8041M-8061M-8061SM-8061SM02 8061SRM-8061SRM FO 20.20502 CG 20.20541 8040-8060-TURBO FO 20.20504 CG 20.20541 FG 20.20561 1908547-8107716 Mod.with decanter filter FG 20.20596 8361M-8361SRM-821OM-828OM 8281SRM-820-1CP3-1-M FO 20.20501 SOLO STELLARE FG 20.20539 STELLARE + CESTELLO FG 20.20540 FG 20.20537 8210-TURBO INTERCOOLING FO 20.20503 STELLARE + CESTELLO FG 20.20540 FG 20.20537 828-TURBO dal 8/24 FO 20.20471 SOLO STELLARE FG 20.20539 FO 20.20470 FG 20.20537 828-TURBO dal 9/24 FO 20.20471 SOLO STELLARE FG 20.20539 BY PASS FO 20.20472 FG 20.20537 ALCUNI H210 X Ø 95 PASSO 16 X 1,5 FG 20.20472 8280-8281-ACQUA FW 20.20670 8280SRI 3 FILTRO OLIO SUPP. FO 20.20530 FILTRO OLIO INVERTITORE ZF FO 20.20507 FILTRO OLIO INVERTITORE LOMAN FO 20.20474 8360-8361-TURBO FO 20.20503 FG 20.20539 AIFO Ref. Original Type Code 8210-8220 ALCUNI 2175107 FO 20.20526 2175045 FG 20.20537 820-821 ALCUNI 2175105 CO 20.20514 2175130 CO 20.20547 CO 3-4-5 2175045 FO 20.20500 2175104 FG 20.20549 804M-8035-40-45 2175046 FO 20.20500 2175119 CG 20.20541 F.OLIO INVERTITORE TWIN DISC CO 20.20475 494 Motorboat components and spare parts - Separator filters, filters

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS BMW Original ref. Type Code B130Z-D20-D35-D50 FO 20.20523 FG 20.20564 D20 FA 20.20594 D50 FA 20.20595 B190Z-B220Z CO 20.20512 D150-D190=MERCRUISER 35.19485 FO 20.20551 =MERCRUISER 35.816168 FO 20.20602 BMW 13321761-278-373 FG 20.20603 =MERCRUISER 35.19486 =MERCRUISER 35.19487 FA 20.20597 BUKH Ref. Originale Type Code DV10-20-ME-MEI FO 20.20523 FG 20.20564 CG 20.20542 DV36-48 FO 20.20507 FG 20.20564 CAT Ref. Originale Type Code 3116TA- 1SK o 1Sk o 4KG 1R0714 FO 20.20478 300-350HP ALCUNI 1R0739 FO 20.20488 1R0750 FG 20.20556 INTERCAMBIABILE SPUGNA 7W5040 FA 20.20582 INTERCAMBIABILE CARTA 8N5006 FA 20.20581 3116 4 KG 350 HP CONICO 8 4P7918 FA 20.20598 Motor Filters Air - Gasoline - Diesel - Oil Legend: FO = Oil filter, screw mounting FG = Fuel filter for screw mounting FB = Gasoline filter FA = Air filter FW = Water filter CO = Oil cartridge CB = Gasoline cartridge CG = Diesel cartridge 3126TA-8NM o 6SR 355 o 420HP 116.9924 FO 20.20465 1R0751 FG 20.20556 TIPO FELTRO CONICO 10 128.3697 FA 20.20650 3208TA 01Z 320HP 1R0714 FO 20.20478 1R0750 FG 20.20556 INTERCAMBIABILE SPUGNA 7W5040 FA 20.20582 INTERCAMBIABILE CARTA 8N5006 FA 20.20581 3208TA-01Z 375HP 1R0714 FO 20.20478 1R0750 FG 20.20556 SPUGNA 9Y2300 FA 20.20583 3208TA-01Z 425HP-435HP 1R0714 FO 20.20478 1R0750 FG 20.20556 SPUGNA 7E0766 FA 20.20584 3176B-9WK 600HP 1R0716 FO 20.20479 1R0749 FG 20.20563 101.1626 FA 20.20654 3196 2XR 660HP 1R0716 FO 20.20479 1R0712 FG 20.20655 101.1626 FA 20.20654 3406E-9WR 800HP 1R0716 FO 20.20479 1R0749 FG 20.20655 136-7353 FA 20.20600 3408C-8RG 800HP 1R0716 FO 20.20479 1R0749 FG 20.20655 TIPO FELTRO CONICO 8 4P7918 FA 20.20598 3412C-39K 1250HP-1350HP 1R0739 FO 20.20488 1R0749 FG 20.20655 TIPO FELTRO CONICO 12 610384 FA 20.20651 FILTRO ACQUA AVVITABILE 9N3717 FW 20.20671 FILTRO ACQUA AVVITABILE 994525 FW 20.20670 Motorboat components and spare parts - Separator filters, filters 495

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS CHRIS CRAFT - ENTRO FUORIBORDO Original ref. Type Code K-M CO 20.20558 W CO 20.20559 225B-283B-307F-350Q-427F-430 FO 20.20506 6536-17131 FO 20.20507 CHRYSLER MARINE - ENTRO FUORIBORDO Original ref. Type Code M80-81-170A-225A-318B-383B-413B-125 155-175-195-200-210-225-235-250-260 300-335-375-525-SUPER CROW FO 20.20507 100-110-120-130-165 FO 20.20508 CRUSADER - ENTRO FUORIBORDO Original ref. Type Code 100-120-CH180-CH220 FO 20.20510 150-160-165-210-350 CB 20.20590 140-180-185-190-220 FO 20.20506 235-250-260-275-280 CB 20.20590 300-320-325-220-250-260-CONQUERER FO 20.20507 CB 20.20590 V8-307-327-347 SHORT FO 20.20510 OPPURE LONG FO 20.20509 EVINRUDE - ENTRO FUORIBORDO Original ref. Type Code EXPLORER V8350 ROUGE-V8 307-327 SPORTMAN V6-225 FO 20.20509 Motor Filters Air - Gasoline - Diesel - Oil Legend: FO = Oil filter, screw mounting FG = Fuel filter, screw mounting FB = Gasoline filter FA = Air filter FW = Water filter CO = Oil cartridge CB = Gasoline cartridge CG = Diesel cartridge ROUGE 8.300 FO 20.20506 SPORTMAN 4.153 FO 20.20510 155-165-225-245 FO 20.20507 MB3-MB6-B14A-BB50-MB36A CO 20.20511 FARYMANN Original ref. Type Code K30-A30-A40-A30-P30-S30= NANNI 970-93.150 FO 20.20515 CG 20.20555 FK2-FK3 FO 20.20520 P.F. KUBOTA FO 20.20534 CG 20.20555 FORD Original ref. Type Code 220/4-24214-330/6D-590E-2701E-2706E CO 20.20511 CG 20.20546 363/6-2704E-2709E CO 20.20512 2703E-2708E-2713E-2714E CG 20.20541 2715E ALCUNI CG 20.20546 2505E-2504E-2512E-2514E FO 20.20507 2503E-2511E-2513E-2610E CG 20.20541 2602E-2651E-2652E-2653E FO 20.20469 2722E CG 20.20541 F.OLIO MOTORCRAFT EFL256 GUARNIZIONE ESTERNA FO 20.20464 F.GASOLIO PER CAV 996 FG 20.20601 54HP FO 20.20560 496 Motorboat components and spare parts - Separator filters, filters

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS LOMBARDINI Original ref. Type Code LDA 904-914-933 FO 20.20523 FG 20.20553 LDW 502-602-903-FOSC FO 20.20626 LDW 502M-602M-903M FG 20.20562 FA 20.20629 LDW1203 CHD-1303-1503 FO 20.20560 LDW1503M-LDW 1204 CHD FG 20.20553 LDW1204M-LDW 1204T - CHD LW 2000 4T FA 20.20587 LDW1204 FOCS FO 20.20627 LDW 1204 M FG 20.20562 FA 20.20630 Motor Filters Air - Gasoline - Diesel - Oil Legend: FO = Oil filter, screw mounting FG = Fuel filter, screw mounting FB = Gasoline filter FA = Air filter FW = Water filter CO = Oil cartridge CB = Gasoline cartridge CG = Diesel cartridge LDW401-LMI -9-10-500-502-503-505-520-523-525-530-532-533 CO 20.20480 CG 20.20628 ALCUNI FG 20.20562 MERCRUISER ENTRO FUORIBORDO BENZINA Original ref. Type Code MCM 260-270-MCM4,3LX V6-4,3 G1 II SERIE 5,0 Gl -5,7 GSI-SX DP-3.0L ALPHA SERIES 30LX ALPHA-5,0L-OLX 5,7-7,4-8,2 54111B1 FO 20.20510 35-60494-1 35-807172 FB 20.20536 MCM 4,3 LX V6 4,3 Gl- 5,0 Gl-5,7 GSI-SXDP ALL SERIES 41815 35-802884Q-T 35-883702 FO 20.20485 35-60494-1 35-807172 FB 20.20536 MERCRUISER DIESEL Original ref. Type Code D 219-D254-D3.0-D3.6-D4.2 35816168 FO 20.20602 3519486 FG 20.20603 3519487 FA 20.20597 D183-D219 ALCUNI D530 D636 D 3.6 -L 6 CV 3519485 FO 20.20551 3519486 FG 20.20603 3519487 FA 20.20597 2.7-3.0-7.3 LT 270 300HP 358005809T FO 20.20481 35807256T FG 20.20619 CMD 2.8-35-879172104 FG 20.20673 CMD QSD 2.0, 2.8, 4.2 35-895207 CO 20.20499 CMD 1.7 MI-MS 120 710-882687 CO 20.20498 NANNI Original ref. Type Code 2,40HE(14A) - 2,40HE-NM 970-493-150 FO 20.20520 970-622-350 FG 20.20554 2,45HE-(240-260-290) ALCUNI 970-302-697 FO 20.20640 970-310-302 FG 20.20568 2,50HE-3,75HE 970-302-697 FO 20.20640 970-622-350 FG 20.20554 2,60H 2,60HE3,90H-3,90HE 4,110H-4,110HE 970-493-150 FO 20.20520 POMPA CAV 970-875-102 CG 20.20541 3,100HE 970-302-742 FO 20.20545 970-310-302 FG 20.20568 3,110HE 4,150HE 970-302-742 FO 20.20545 970-622-350 FG 20.20554 Motorboat components and spare parts - Separator filters, filters 497

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS NANNI Original ref. Type Code 4,180 970-603-003 FO 20.20508 SOST. (VECCHIO MODELLO) 970-652-307 970-310-302 FG 20.20568 4,190HE-4200HE-4,220HE-5,280HE 6,280HE 970-603-003 FO 20.20508 970-622-350 FG 20.20554 4,240-5,300-5,300T 970-623-125 CO 20.20522 970-622-350 FG 20.20554 4,330 970-603-003 FO 20.20508 H 131 PASSO20X1,5TAPPO INFERIORE SPIA ALLARME 36X1,5 FG 20.20622 Motor Filters Air - Gasoline - Diesel - Oil Legend: FO = Oil filter, screw mounting FG = Fuel filter, screw mounting FB = Gasoline filter FA = Air filter FW = Water filter CO = Oil cartridge CB = Gasoline cartridge CG = Diesel cartridge 4,440 E-6,660 E-LE 51.05501-7173 FO 20.2055 51.12503-0018 FG 20.20561 MB 180 MB 200 MB 220 CO 20.20521 CG 20.20543 MB 300 CO 20.20522 FG 20.20554 OMC - ENTRO FUORIBORDO BENZINA Original ref. Type Code M100-200 ENGINE FO 20.20508 100-110-120all -3,0l-5,0I all-5,7l all J 140-JX245-290-SDX245all 173232-174585 FO 20.20510 FB 20.20644 150V6-155 165 185 all-200vb-210-15-25-35-45 250all 350-454 KING COBRA ALL FO 20.20509 SHORT 173232-174585 FO 20.20510 ALCUNI FO 20.20506 FB 20.20644 2,3L all-5,8l all FO 20.20494 FB 20.20644 PERKINS Original ref. Type Code 3.152-4.192 FO 20.20523 CON FILTRO AC FG 20.20546 CON FILTRO CAV 44 FG 20.20550 CON FILTRO CAV 296 CG 20.20541 AD3.152-A4.107 - AD4.903-P4-P6 FO 20.20608 CG 20.20541 4A.99-A4.107-P3-F6 FO 20.20608 3.144-3.152-4.192 CG 20.20541 4.203 FO 20.20523 4.108 CO 20.20511 FG 20.20546 OPPURE FO 20.20602 OPPURE FO 20.20507 DOPPIA FILTRAZIONE 2654343 FO 20.20639 CG 20.20541 4270-4300 CO 20.20512 CG 20.20541 6.30-C305 CO 20.20512 FG 20.20546 498 Motorboat components and spare parts - Separator filters, filters

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS PERKINS Original ref. Type Code 6.354/T/HT-6.372 CO 20.20608 OPPURE CO 20.20607 OPPURE CO 20.20512 OPPURE CO 20.20507 OPPURE DOPPIA FILTRAZIONE FO 20.20639 OPPURE FO 20.20602 CG 20.20611 OPPURE FG 20.20546 OPPURE FG 20.20550 OPPURE CG 20.20541 V8.510-V8.605 CO 20.20511 OPPURE CO 20.20512 OPPURE FO 20.20602 CG 20.20552 Motor Filters Air - Gasoline - Diesel - Oil Legend: FO = Oil filter, screw mounting FG = Fuel filter, screw mounting FB = Gasoline filter FA = Air filter FW = Water filter CO = Oil cartridge CB = Gasoline cartridge CG = Diesel cartridge TV8.511-TV8.640 V8.540-V8.640 FO 20.20602 OPPURE FO 20.20507 FG 20.20552 PRIMA M25-M50-M60-M80T-4CL (2,0L) FO 20.20560 FG 20.20561 1004TG-1006TG 1 -TG2-6TW 2654403-26560919 FO 20.20507 DOPPIA FILTRAZIONE 2654343 FO 20.20639 26560142-143 FG 20.20619 26560920-1000ALL 2654403 FO 20.20507 DOPPIA FILTRAZIONE 2654343 FO 20.20639 POMPA CAV 26541117 CG 20.20541 1004-A all 2654407 FO 20.20602 POMPA CAV 26541117 CG 20.20541 101-102/4-103/6-103/9-13-15-104/19-22 ALCUNI 14051613 Ø 94mm PASSO 3/4 X 16 FO 20.20508 Ø 77mm PASSO 3/4 X 16 140516190 FO 20.20483 130366020 FG 20.20657 POMPA SIGMA V80 FG 20.20609 POMPA SIMMS 91186 26560125 CG 20.20613 RENAULT COUACH Original ref. Type Code 2.60-3.90 FO 20.20523 RCD 16 FO 20.20527 FG 20.20610 RC 25-R40 FO 20.20461 RC 75D FO 20.20516 CG 20.20541 RC 80D CO 20.20511 RC 100 JET FO 20.20515 RC 130D FO 20.20507 RC 140D-RC210D CO 20.20512 CG 20.20541 Motorboat components and spare parts - Separator filters, filters 499

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS RUGGERINI Original ref. Type Code PM 105/2-P 10512 - CRDK 100/2 FO 20.20527 FG 20.20557 Motor Filters Air - Gasoline - Diesel - Oil RDM 901/2-RDK 901/2 FO 20.20527 FG 20.20610 RDK 80-RDM 901 FG 20.20542 MM-250-351 175.24 FO 20.20516 175.19 FG 20.20557 RM 90-MM150-191 175-20-23 FG 20.20562 VETUS MOTORI MITSUBISHI Original ref. Type Code M3,10 e ALTRI STM0051 FO 20.20641 SEPARATORE STM3690 FG 20.20519 VETUS MOTORI PEUGEOT Original ref. Type Code PASSO 3/4 STM9316 FO 20.20618 POMPA CAV 296 CG 20.20541 VM MOTORI Original ref. Type Code HR 192 A HR 292 A FO 20.20516 CG 20.20541 Legend: FO = Oil filter, screw mounting FG = Fuel filter, screw mounting FB = Gasoline filter FA = Air filter FW = Water filter CO = Oil cartridge CB = Gasoline cartridge CG = Diesel cartridge HR 392 A-HR394H-RA394HR392 SHIR FO 20.20523 CG 20.20541 HR392-HRT-HR382SRI-HR394HT FO 20.20508 FG 20.20561 HR 488-HR 492HI-HR 494 FO 20.20639 DOPPIA FILTRAZIONE HR 594-694HI CG 20.20552 OPPURE FG 20.20561 HR 588-HR 592- HR 594-HR 692-HR 694 FO 20.20602 CG 20.20552 OPPURE FG 20.20561 250-300 165 4 CV MD 700 Ll 4115.52012F FO 20.20525 35.312018F FG 20.20619 195SV (6/1968) CO 20.20592 FG 20.20542 (7/1968-4/1974) FO 20.20524 FG 20.20557 OPPURE CG 20.20541 295SV-298SV-395-398SV FO 20.20524 FG 20.20557 OPPURE CG 20.20541 951SU-952SU-101SU-102SU-1051 SU- FO 20.20463 1052SU-1151 SU-1152SU-1152DAN-1153DAN FG 20.20557 OPPURE CG 20.20541 953SU-954SU-956SU -103SU-104SU-T1056SU-T1156DAN 6 CL FO 20.20528 FG 20.20643 OPPURE FG 20.20557 OPPURE CG 20.20541 106SU FO 20.20528 FG 20.20553 OPPURE CG 20.20541 112-114-395-1053SU FO 20.20528 FG 20.20557 OPPURE CG 20.20541 500 Motorboat components and spare parts - Separator filters, filters

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS VM MOTORI Original ref. TYpe Code 116-153DAN-156DAN-1056SU-1154DAN-1156DAN FO 20.20528 FG 20.20553 OPPURE FG 20.20561 1306V-1308V-2200 FO 20.20526 FG 20.20553 OPPURE FG 20.20537 1310V-1312V-1316V-2300 FO 20.20525 FG 20.20553 OPPURE FG 20.20537 Motor Filters Air - Gasoline - Diesel - Oil Legend: FO = Oil filter, screw mounting FG = Fuel filter, screw mounting FB = Gasoline filter FA = Air filter FW = Water filter CO = Oil cartridge CB = Gasoline cartridge CG = Diesel cartridge 2105SUN FO 20.20463 CG 20.20541 3105SUN-6105SUN FO 20.20528 CG 20.20552 VOLVO PENTA Original ref. TYpe Code 2001-B 2002-B 2003B-2003-T-TB FO 20.20516 FG 20.20557 OPPURE CG 20.20541 MD 2010 A-B 861473-7 FO 20.20483 861477.8 FG 20.20657 MD 2020 AB 3581621-4 FO 20.20483 MD 2030 AB 3581078-7 CG 20.20541 MD 2040-A-B ALCUNI FO 20.20483 FG 20.20657 OPPURE CG 20.20541 MD2040 O-A-B ALCUNI 861475-2 FO 20.20508 861477.8 FG 20.20657 MD 2010C-2020 2030 2040 C FO 20.20483 CG 20.20541 MD 1 FO 20.20483 CG 20.20542 MD1B-MD2-MD2B-AQD2B-MD3B 834337.8 FO 20.20516 A BAGNO 876564-7 CG 20.20542 MD5-A-B-C-MD 11C-D-MD17C-D 829913 FG 20.20557 POMPA CAV CG 20.20541 MD6-A-B 844337 FO 20.20516 MD 7-A-B 829993-5 FG 20.20553 860874-7 FG 20.20561 829913-3 FG 20.20557 MD 22-A-L-A - TMD 22 A 861476-0 FO 20.20560 860874-7 FG 20.20561 MD 22 L B - MD 22P-B - TMD22B-P-B 3517857-3 FO 20.20508 860874-7 FG 20.20561 AQD21-A 3517857-3 FO 20.20508 3581078 CG 20.20541 AQD29-AQD29/200-AQD32-AQD32A AQD32/250e270-AQD32A/270 6612598-4804651 FO 20.20602 CG 20.20541 Motorboat components and spare parts - Separator filters, filters 501

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS VOLVO PENTA Original ref. Type Code MD30A-TMD30A-TAMD30A- AQAD30A FO 20.20508 3825133.6 FG 20.20553 876185.0 FA 20.20585 FILTRO ARIA SFIATO 876069-6 FA 20.20599 MD 31A-TMD31A-TAMD31A- AQAD31A-AD31A-TMD31 B-TAMD31 B AD31 B -AD31D-AD31XD-TMD31L-ATAMD31P-L - M-A-AD31 P-L-A 3517857.3 FO 20.20508 3825133.6 FG 20.20553 858488.0 FA 20.20586 FILTRO ARIA SFIATO 876069-6 FA 20.20599 Motor Filters Air - Gasoline - Diesel - Oil Legend: FO = Oil filter, screw mounting FG = Fuel filter, screw mounting FB = Gasoline filter FA = Air filter FW = Water filter CO = Oil cartridge CB = Gasoline cartridge CG = Diesel cartridge MD40A-THD40A-AQD40A-AQAD40A-TMD40B TAMD40B AQAD40B-TMD40C 471034.9 FO 20.20532 860874.7 FG 20.20561 RETTANGOLARE 876185 FA 20.20585 FILTRO ARIA SFIATO 876069-6 FA 20.20599 TMD41A-AQD41A-D41A-TAMD41A - AQAD41A-AD41A TMD41 B-D41 B - TAMD41B-AD41B-TMD41D - D41 D TAMD41 D-AD41 D FO 20.20532 FO 20.20497 FG 20.20561 CIRCOLARE FA 20.20586 FILTRO ARIA SFIATO 876069-6 FA 20.20599 KAMD42A-KAD42A-KAD42B-KAMD42B-KAMD42P-A KAD42P-A KAMD43-P-A - TAMD42W-Y-A FO 20.20551 FG 20.20561 RETTANGOLARE FA 20.20585 FILTRO ARIA SFIATO 876069-6 FA 20.20599 KAD 32P-A 3517857.3 FO 20.20508 3825133.6 FG 20.20553 RETTANGOLARE 876185.0 FA 20.20585 FILTRO ARIA SFIATO 876069-6 FA 20.20599 TAMD60-A-B-TAMD60C 4785974.9 FO 20.20551 3825133.6 FG 20.20553 FILTRO ARIA LAMIERA 842280 FA 20.20620 FILTRO ARIA SFIATO 876069-6 FA 20.20599 TAMD61 A 466634.3 FO 20.20488 OPPURE 847741.6 FO 20.20486 BY PASS 3827069.0 FO 20.20485 3825133.6 FG 20.20553 RETTANGOLARE N 2 876185.0 FA 20.20585 FILTRO ARIA SFIATO 876069-6 FA 20.20599 TAMD62A-TAMD63P-A-L-A 847741.6 FO 20.20486 BY PASS 3827069 FO 20.20485 3825133.6 FG 20.20553 SOLO TAMD62A 876185.0 FA 20.20585 SOLO TAMD63P A-L-A-SPUGNA 3825038-7 FA 20.20652 FILTRO ARIA SFIATO 876069-6 FA 20.20599 TMD70B-MD70B-MD70C-TMD70C-AQD 70B 4785974.9 FO 20.20551 POMPA CAV 3581078.7 CG 20.20541 POMPA BOSCH 3825133.6 FG 20.20553 CIRCOLARE 858488 FA 20.20586 FILTRO ARIA SFIATO 876069-6 FA 20.20599 502 Motorboat components and spare parts - Separator filters, filters

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS VOLVO PENTA Original ref. Type Code TMD70C-B TAMD70B-TAMD70C-AQD70C-B FO 20.20551 POMPA CAV 3581078.7 CG 20.20541 POMPA BOSCH 3825133.6 FG 20.20553 LAMIERA 842280 FA 20.20620 FILTRO ARIA SFIATO 876069-6 FA 20.20599 TAMD70E-THAMD70B-C AQD70D 471034.9 FO 20.20532 3825133.6 FG 20.20553 LAMIERA 842280 FA 20.20620 FILTRO ARIA SFIATO 876069-6 FA 20.20599 TAMD71 B-TAMD72A-TAMD72P-A-TAMD73P-A TAMD73WY-A- TAMD74P-A 422994.4-847741.6 FO 20.20486 BY PASS 3827069 FO 20.20485 7860874 FG 20.20561 OPPURE 3825133.6 FG 20.20553 RETTANGOLARE 876185 FA 20.20585 FILTRO ARIA SFIATO 876069-6 FA 20.20599 Motor Filters Air - Gasoline - Diesel - Oil Legend: FO = Oil filter, screw mounting FG = Fuel filter, screw mounting FB = Gasoline filter FA = Air filter FW = Water filter CO = Oil cartridge CB = Gasoline cartridge CG = Diesel cartridge MD100A-TMD100A-MB100B-TMD120A-TAMD120A MD120A 4785974.9 FO 20.20551 POMPA BOSCH A BAGNO 233897.8 FG 20.20544 POMPA BOSCH AVVITABILE 3825133.6 FG 20.20553 LAMIERA 842280 FA 20.20620 FILTRO ARIA SFIATO 876069-6 FA 20.20599 TMD100C-TMD102A-TAMD102A-D TAMD103A-TMD120B TAMD120B-TMD121C TAMD121C-D-TMD122D TAMDI122A-TAMD122C 466634.3 FO 20.20488 3825133.6 FG 20.20553 LAMIERA 842280 FA 20.20620 FILTRO ARIA SFIATO 876069-6 FA 20.20599 TAMD122D-TAMD122P-A-P-B 847741.6 FO 20.20486 3825133.6 FG 20.20553 LAMIERA 842280 FA 20.20620 TAMD162A-TAMD162B-TAMD162C-TAMD163A-A TAMD163P-A 478736.2 FO 20.20488 864315.7 FG 20.20561 OPPURE 3825133 6 FG 20.20553 LAMIERA 842280 FA 20.20620 D4-D6-D9 3818541 FA 20.20661 3584145 FA 20.20662 VOLVO PENTA - GASOLINE STERNDRIVE Original ref. Type Code BB30-BB100-MB18-MB18F-MB20A MB20B-MB20C-BB115A BB115B BB115C-BB165ABB 170A-B-C-AQ60F AQ90-AQ95 AQ100-AQ95A-AQ110 AQ120 AQ115A-AQ115B-AQ130A AQ130B-AQ130C-AQ130DAQ165A AQ170A-AQ170B-C FO 20.20508 AQ120B-AQ125A-B-AQ131A-B-C-D-AQ140A AQ145A-B-AQ151A-B-C- AQ171A-C230A-B 250A-B-251A-BB140A-BB145A 3517857.3 FO 20.20508 A BAGNO 885952.8 CB 20.20590 3581078 CG 20.20541 Motorboat components and spare parts - Separator filters, filters 503

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS VOLVO PENTA - GASOLINE STERNDRIVE Original ref. Type Code 3.0GL - 3.0GS 835440.9 FO 20.20510 AVVITABILE Ø 76 3852413.8 FB 20.20660 AQ 175A 841750 FO 20.20485 A BAGNO 855952.8 CB 20.20590 3581078.7 CG 20.20541 430A-430B 841750 FO 20.20485 AVVITABILE Ø 96 855686 FB 20.20536 35810787 CG 20.20541 AQ190A-AQ240A-5.0FL-5.8FL-5.8FL 5.0FL-5.8FS 835779.0 FO 20.20507 AVVITABILE Ø 76 3852413.8 FB 20.20660 Motor Filters Air - Gasoline - Diesel - Oil Legend: FO = Oil filter, screw mounting FG = Fuel filter, screw mounting FB = Gasoline filter FA = Air filter FW = Water filter CO = Oil cartridge CB = Gasoline cartridge CG = Diesel cartridge AQ20QB-AQ200C-AQ200D-AQ200F 835440.9 FO 20.20510 A BAGNO 855952.8 CB 20.20590 3581078.7 CG 20.20541 AQ205A-431A- 431B-432A-432B 841750.3 FO 20.20485 AVVITABILE Ø 96 855686 FB 20.20536 3581078.7 CG 20.20541 4,3GL-4,3GS-4,3GL 841750.3 FO 20.20485 AVVITABILE Ø 76 3852413.8 FB 20.20660 AQ211A-500A-B-AC225A-C-D-E-F-BB225A/B-C AQ231A-B-BB231A-501 A-B-AQ255A-B-AQ260A-B BB260A-B-C-BB261 A- AQ271 A-B-C-D-570A-572A570A-MS4A 835440.9 FO 20.20510 AVVITABILE 855686 FB 20.20536 A BAGNO 855952 CB 20.20590 3581078.7 CG 20.20541 5.OGL-5.OGI-5.7GS-5.7GSI-5.7GXI 3850559.0 FO 20.20510 AVVITABILE Ø 76 38524138 FB 20.20660 5.7GL-5.7GI-7.4GL 835440.9 FO 20.20510 AVVITABILE Ø 76 3852413.8 FB 20.20660 ALCUNI PASSO 3/4X16 3850559 FO 20.20508 AQ280A-AQ290A-AQ311A-B-571A-740A-B 835440.9 FO 20.20510 ALCUNI (A BAGNO) 855952.8 CB 20.20590 ALCUNI 3581078.7 CG 20.20541 AVVITABILE Ø 96 ALCUNI 855686 FB 20.20536 7.4GI-7.4GSI-8.1 Gl-GSI-8.2GL-8.2GSI-8.2GSI 3/4X16 ALCUNI 3850559.0 FO 20.20508 ALCUNI 835440.9 FO 20.20510 AVVITABILE Ø 76 3852413.8 CB 20.20660 YANMAR Original ref. Type Code 1 GM-26M20 20F 36M30 30F (10 20 30 CV) 119660-35150=124450.35150 FO 20.20534 104500-55710 CG 20.20574 F.ARIA CONICO SPUGNA 128170-12540-128171-12540 FA 20.20589 3JH2E-3JH2TE-3JH3E(38 40 CV) 119305-35150 FO 20.20640 129470-55710-711 FG 20.20568 FILTRO ARIA CIRCOLARE COMPLETO SPUGNA+CESTELLO 129470-12330 FA 20.20653 4JHE-H2E-H2TE-H2HTE-H2UTE H mm. 80 129150-35150 FO 20.20624 HDTE-2DTE-4JH3E-H3TE-H3DTE Alcuni mm.128 119100-35100 FO 20.20535 (62-107CV ALCUNI 125-150CV) mm 120 129574-55710/11 FG 20.20612 H mm.80/80 129470-55701 FG 20.20568 FILTRO CIRCOLARE COMPLETO SPUGNA + CESTELLO 129470-12330 FA 20.20653 504 Motorboat components and spare parts - Separator filters, filters

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS YANMAR Original ref. Tipo Codice LHTE-4LHHTE (125-150 CV) 119005-35100 FO 20.20545 alcuni mm.128 119100-35100 FO 20.20535 121857-55710 FG 20.20622 alcuni stesso dis. ma Ø mm.78 FG 20.20621 FILTRO ARIA SPUGNA CIRCOLARE 119195-18880 FA 20.20593 4LHDTE-4LHSTE (185CV-STE 238) 127695-35150 FO 20.20518 ALCUNI (H140X94CON DADO) FO 20.20490 mm. 88 41650-502320 CG 20.20575 ALCUNI mm.140 41650-502330 FG 20.20623 FILTRO ARIA SPUGNA CIRCOLARE 119195-18880 FA 20.20593 alcuni stesso dis. ma Ø mm.78 121857-55710 FG 20.20621 Motor Filters Air - Gasoline - Diesel - Oil Legend: FO = Oil filter, screw mounting FG = Fuel filter, screw mounting FB = Gasoline filter FA = Air filter FW = Water filter CO = Oil cartridge CB = Gasoline cartridge CG = Diesel cartridge 6 LPDTE-6LPSTE (250-300 CV) 119770-90620 FO 20.20468 T.90915-3002 FO 20.20468 X51861-00664-119773.55510 FG 20.20632 6LYVTE.BY PASS- 6LY2STE (420 CV) ALCUNI I 119593-35400 S.V. FO 20.20492 II 119593.35100 FO 20.20457 ALCUNI A BAGNO 41650-502330-41650-55810 CG 20.20623 AVVITABILE 127695-55630 FG 20.20556 FILTRO ARIA SPUGNA CIRCOLARE 119593-18880 FA 20.20625 6LYSTE-6LYUTE-6LYASTE (300CV) 119593-35100 FO 20.20457 41650-502330 CG 20.20623 FILTRO ARIA SPUGNA CIRCOLARE 119593-18880 FA 20.20625 6CXETE 129695-35150 FO 20.20518 II PASSAGGIO BY PASS 119593-35400 FO 20.20492 127695-55630 FG 20.20633 BG 3 SM3 129150-35151 FO 20.20624 129100-55650 CG 20.20634 D27 FUORIBORDO 124450-35150-119660-35150 FO 20.20534 CART. GASOLIO ALCUNI MOTORI 124550-55700 CG 20.20635 Motorboat components and spare parts - Separator filters, filters 505

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS Size filters Oil Spin-on oil filters Code D1 D2 D3 H 20.20524 76 M 14X1,5 66 78 20.20527 48 M 14X1,5 45 118 20.20485 76 M 18x1,5 72 120 20.20464 94 M 20X1,5 88 82 20.20466 80 M 20X1,5 63 100 20.20534 84 M 20X1,5 63 84 20.20535 90 M 20X1,5 64 132 20.20545 80 M 20X1,5 63 100 20.20560 80 M 20X1,5 71 120 20.20617 85 M 20X1,5 71 77 20.20624 89 M 20X1,5 62 80 20.20626 78 M 20X1,5 72 60 20.20627 78 M 20X1,5 72 90 20.20640 68 M 20X1,5 61 63 20.20641 68 M 20X1,5 61 73 20.20642 68 M 20x1,5 61 87 20.20463 79 M 22X1,5 75 90 20.20469 90 M 22X1,5 64 82 20.20472 108 M 22x1,5 100 230 20.20528 95 M 22X1,5 71 148 20.20659 91 M 22X1,5 81 20.20468 98 M 24X1,5 78 121 20.20471 108 M 30X2 104 140 20.20503 108 M 30X2 97 210 20.20530 84 5/8 X18 72 135 20.20467 76 3/4-16 UNF 72 101 20.20483 78 3/4-16 UNF 65 95 20.20493 76 3/4-16 UNF 71 59 20.20500 107,5 3/4-16 UNF 71 184 20.20502 107 3/4-16 UNF 71 141,5 20.20504 108 3/4-16 UNF 72 154 20.20505 107,5 3/4-16 UNF 71 114 20.20507 95 3/4-16 UNF 71 138 Spin-on oil filters Cod. D1 D2 D3 H 20.20508 95 3/4-16 UNF 71 101 20.20515 94 3/4-16 UNF 72 68 20.20516 76 3/4-16 UNF 72 55 20.20520 76 3/4-16 UNF 71 90 20.20523 76 3/4-16 UNF 71 126 20.20533 95 3/4-16 UNF 71 112 20.20548 76 3/4-16 UNF 72 101 20.20602 94 3/4-16 UNF 72 175 20.20618 85 3/4-16 UNF 80 87 20.20636 65 3/4-16 UNF 62 50 20.20637 65 3/4-16 UNF 62 60 20.20638 65 3/4-16 UNF 62 90 20.20639 94 3/4-16 UNF 72 135 20.20646 78 3/4-16 UNF 72 78 20.20506 95 13/16-16 UNF 71 138 20.20509 95 13/16-16 UNF 90 148,5 20.20510 95 13/16-16 UNF 90 101 20.20532 94 1-12 UNF 71 142 20.20457 96 1-12 UNF 75 205 20.20490 90 1-12 UNF 72 150 20.20497 106 1-12 UNF 72 132 20.20501 107 1-12 UNF 72,5 230 20.20518 95 1-12 UNF 71 170 20.20525 95 1-12 UNF 71 210 20.20526 95 1-12 UNF 71 148,5 20.20551 95 1-12 UNF 72 177 20.20492 93 1-16 UNF 72 170 20.20474 108 1 1/8-16 UNF 72 260 20.20478 106 1 1/8-16 UNF 100 178 20.20479 135 1 1/8-16 UNF 112 305 20.20486 106 1 1/8-16 UNF 102 160 20.20488 108 1 1/8-16 UNF 102 265 20.20481 107 1 1/2-16 UNF 102 150 Size filters Gasoline - Diesel Spin-on Gasoline and Diesel filters Code Use D1 D2 D3 H Bleeding 20.20536 gasoline 93 11/16-16 UNF 72 98 20.20644 gasoline 93 1-12 UNF 72 108 20.20660 gasoline 76 13/16-16 UNF 70 85 20.20601 diesel 84 Ø mm. 15 140 SI 20.20619 diesel 79 Ø mm. 22 100 125 SI 20.20563 diesel 54 M 12X1,75 50 130 20.20610 diesel 48 M 12X1,75 45 115 20.20554 diesel 80 M 14X1,5 71 100 20.20562 diesel 78 M 14X1,5 70 58 20.20596 diesel 95 M 14X1,5 71 175 SI 20.20519 diesel 76 M 16X1,5 72 94 20.20553 diesel 76 M 16X1,5 72 119 20.20557 diesel 75 M 16X1,5 80 90 20.20561 diesel 80 M 16X1,5 70 153 SI 20.20564 diesel 81 M 16X1,5 71 100 SI 20.20566 diesel 95 M 16X1,5 71 140 Spin-on Gasoline and Diesel filters Code Use D1 D2 D3 H Bleeding 20.20569 diesel 96 M 16X1,5 72 210 20.20603 diesel 108 M 16X1,5 70 127 SI 20.20647 diesel 78 M 16X1,5 72 140 20.20673 diesel 87 M 16X1,5 170 SI 20.20568 diesel 80 M 20X1,5 63 76 20.20612 diesel 80 M 20X1,5 63 122 SI 20.20622 diesel 96 M 20X1,5 72 120 SI 20.20606 diesel 87 7/16-20 87/50 124 SI 20.20605 diesel 87 3/8 Ww - 24 87/50 124 SI 20.20537 diesel 107,5 3/4-16 UNF 71 184 20.20549 diesel 106 3/4-16 UNF 72 115 20.20621 diesel 77 3/4-16 UNF 60 135 Ø mm. 36 20.20632 diesel 90 3/4-16 UNF 62 135 SI 20.20657 diesel 78 3/4-16 UNF 62 95 20.20643 diesel 95 1-14 UNF 71 148,5 20.20556 diesel 93 1-14 UNF 72 170 20.20655 diesel 95 1-14 UNF 72 230 506 Motorboat components and spare parts - Separator filters, filters

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS Cartridges oil Code D1 D2 D3 H H1 20.20475 100 27 27 238 230 20.20480 23 10 6 52 50 20.20498 72 32 32 92 81 20.20499 82 23 39 110 102 20.20511 95 33 33 100 97 20.20512 98 33 33 119 119 20.20513 116 13,8 13,8 200 200 20.20514 110 36 36 228 228 20.20521 98 13,2 13,2 118 118 20.20522 89 25 12 190 190 20.20529 71 33 33 143 143 20.20558 108 13,2 13,2 124 124 20.20559 95 13,2 13,2 170 170 20.20580 115 55 55 185 180 20.20592 95 33 33 194 194 20.20607 72 21 21 116 116 20.20608 68 33 33 156 156 Cartridge diesel Purflux CN135 particularly used on sailboats. Dim Ø ext. mm.41, Ø int. mm. 9, h. mm. 14. Cartridges Diesel e Gasoline Code Use D1 D2 D3 H H1 Material 20.20590 Gasoline 54 11 90 89 Paper 20.20538 Diesel 95 26 27 120 110 Paper 20.20539 Diesel 78 32 149 142 Paper 20.20540 Diesel 94 13 26 187 180 Paper 20.20541 Diesel 78 19 17 71 Paper 20.20542 Diesel 67 14 14 69 57 Paper 20.20543 Diesel 62 13,8 113 106 Panno 20.20544 Diesel 82 13,8 145 138 Paper+net 20.20546 Diesel 70 21 84 84 Paper 20.20547 Diesel 82 26 200 189 Paper 20.20550 Diesel 82 16 16 82 71,5 Paper 20.20552 Diesel 87 20 20 110 Paper 20.20555 Diesel 54 10 10 64 60 Paper 20.20565 Diesel 82 13,5 142 136 Paper 20.20570 Diesel 74 24,5 100 89 Paper 20.20571 Diesel 76 27 27 200 200 Paper 20.20574 Diesel 35 11 69,5 67 Paper 20.20575 Diesel 72 14 14 95,5 83 Paper 20.20591 Diesel 62 15,8 15,8 115 70 Paper 20.20611 Diesel 70 33 33 90 Paper 20.20613 Diesel 84 82 134 20.20614 Diesel 94 42 98 Paper 20.20616 Diesel 65 14,4 14,4 51 Paper 20.20623 Diesel 91 15 15 135 132 Paper 20.20628 Diesel 42 9,5 14,5 56 Paper 20.20631 Diesel 55,5 6,5 21,5 48 Paper 20.20634 Diesel 50 21 92 Paper Size filters Air - Gaoline Diesel - Oil 20.20658 Cartridge Air filter Code D1 D2 H H1 20.20582 152 122 250 20.20583 340 230 35 20.20584 325 215 60 20.20585 335 168 36 20.20586 200 93 90 100 20.20589 110 80 70 20.20593 150 60 20.20594 171 126 54 60 20.20595 240 124 49 49 20.20597 322 184 39 20.20599 80 48 148 156 20.20620 196 106 325 280 20.20625 170 60 20.20629 224 136 38 20.20630 272 133 40 20.20650 190 130 205 20.20651 220 180 300 20.20652 520 190 20 20.20653 125 75 20.20654 300 200 20.20661 302 240 40 20.20662 20.20675 150 90 85 95 20.20620 Filter 20.20675 Filter 20.20653 Filter 20.20599 Filter 20.20586 Filter 20.20597 Filter 20.20654 Filter 20.20594/5 Filter 20.20629/630 Filter Size filter Air 20.20598/650/651 Filter 20.20582 Filter 20.20584 Filter 20.20652 Filter 20.20583 Filter 20.20589 Filter 20.20593/625 Filter 20.20661 Filter 20.20662 Filter Motorboat components and spare parts - Separator filters, filters 507

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS Aifo Filter Air - Gasoline - Diesel - Oil 1. 20.20514 Oil Cartridge 2. 20.20472 Oil Filter 3. 20.20503 Oil Filter 4. 20.20501 Oil Filter 5. 20.20471 Oil Filter 6. 20.20502 Oil Filter 7. 20.20537 Diesel Filter 8. 20.20541 Cartridge Diesel 9. 20.20533 Oil Filter 10. 20.20670 Filter 11. 20.20539 Diesel Cartridge 11. 20.20540 Diesel Cartridge (Complete) 12. 20.20561 Diesel Filter 13. 20.20627 Oil Filter 14. 20.20562 Diesel Filter 15. 20.20557 Diesel Filter 16. 20.20629 Air filter 17. 20.20630 Air filter 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Caterpillar - Filter Air - Gasoline - Diesel - Oil 1. 20.20651 Air filter 2. 20.20654 Air filter 3. 20.20676 Filter 4. 20.20650 Air filter 5. 20.20582 Air filter 6. 20.20583 Air filter 7. 20.20676 Filter 8. 20.20671 Filter 9. 20.20479 Oil filter 10. 20.20556 Diesel filter 11. 20.20478 Oil filter 12. 20.20584 Air filter 1 2 3 4 5 6 7 8 9 10 11 12 Bmw - Mercruiser - OMC - Onan - Perkins Filter Air - Gasoline - Diesel - Oil 1. 20.20597 Air filter 2. 20.20603 Diesel filter 3. 20.20510 Oil filter 4. 20.20485 Oil filter 5. 20.20545 Oil filter 6. 20.20605 Diesel filter (Pitch 3/8 Ww-24) 6. 20.20606 Diesel filter (Pitch 7/16-20) 7. 20.20602 Filter 8. 20.20533 Oil filter 9. 20.20564 Diesel filter 10. 20.20590 Cartridge Gasoline 11. 20.20536 Gasoline filter 3 4 1 5 6 7 2 8 10 9 11 508 Motorboat components and spare parts - Separator filters, filters

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS Ford - Lombardini - Nanni - Ruggerini - Slanzi - VM Filter Air - Gasoline - Diesel - Oil 5 6 1 7 2 8 9 3 4 10 11 12 13 16 14 15 1. 20.20629 Air filter 2. 20.20527 Oil filter 3. 20.20622 Diesel filter 4. 20.20507 Oil filter 5. 20.20511 Cartridge Oil 6. 20.20562 Diesel filter 7. 20.20611 Cartridge Diesel 8. 20.20631 Cartridge Diesel 9. 20.20480 Cartridge Oil 10. 20.20561 Dielsel filter 11. 20.20568 Dielsel filter 12. 20.20533 Oil filter 13. 20.20516 Oil filter 14. 20.20553 Dielsel filter 15. 20.20545 Oil filter 16. 20.20640 Oil filter 2 3 Volvo Penta - Filter Air - Gasoline - Diesel - Oil 1 4 5 12 6 7 8 9 10 11 17 18 19 20 14 15 16 13 1. 20.20488 Oil filter 2. 20.20585 Air filter 3. 20.20620 Air filter 4. 20.20561 Diesel filter 5. 20.20620 Air filter 7. 20.20507 Oil filter 8. 20.20493 Oil filter 9. 20.20518 Oil filter 10. 20.20508 Oil filter 11. 20.20532 Oil filter 12. 20.20675 Air filter 13. 20.20590 Gasoline filter 14. 20.20486 Oil filter 15. 20.20485 Oil filter 16. 20.20510 Oil filter 17. 20.20586 Air filter 18. 20.20652 Air filter 19. 20.20599 Air filter 20. 20.20565 Cartridge Diesel 1 Yanmar - Filter Air - Gasoline - Diesel - Oil 5 6 2 7 3 4 1. 20.20457 Oil filter 2. 20.20622 Diesel filter 3. 20.20653 Air filter 4. 20.20518 Oil filter 5. 20.20640 Oil filter 6. 20.20574 Sistema portatile per lavaggio serbatoi e depurazione gasolio 7. 20.20568 Diesel filter 8. 20.20589 Air filter 9. 20.20625 Air filter 8 9 2 4 Bosh - Diesel Cartridge 1. 20.20542 Diesel Cartridge 2. 20.20544 Diesel Cartridge 3. 20.20543 Diesel Cartridge 4. 20.20565 Diesel Cartridge 1 3 Motorboat components and spare parts - Separator filters, filters 509

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS SEPARATOR FILTERS, FILTERS Portable system to wash tanks and purify diesel fuel The condensation that forms inside the tank because dirty water and bacteria. These bacteria in contact with water and diesel fuel, causing a very intense proliferation. Will form a sediment on the bottom that will damage the circuit of the fuel tanks and causing malfunction and corrosion. This system allows, with only one application, the cleaning of the tanks without having to land and the complete purification of diesel. 1 5 3 4 2 1 - Aspiration 2 - Entry filter 3 - Step by filters to PUMP 4 - Exit PUMP 5 - Return to the tank 19.21020 30 micron Racor spare filter. Article Capacity Power Volt Amp Weight Kg. Dims cm. 19.50010 75 lt/min 500 W 220 V 3,5 A 30 120x55x40 Incoflux Product mentioned in the case of bacterial contamination of reservoirs and tanks of diesel. Suitable for the treatment of diesel, biodiesel, and mixtures thereof. Ensures effective biocidal action at points of higher concentration of bacteria, avoiding clogging and / or rupture of filters, injectors, etc.. Pour the product into the tank before filling. Use 1 liter of oil every 1000-2000lt. Antibacterial diesel Effective antibacterial diesel biocide formulated to protect diesel against the attack of bacteria, mashrooms and algae. Its action allows to prevent the alteration of the mass of the liquid and to clean tanks, pipes, also buried, and supply tanks. The possible presence of water in the fuel and the proliferation therein of bacteria, mushrooms and spores, may cause alterations of hydrocarbons and encourage the formation of slime and deposits on the bottom of the tanks, thus causing the clogging of the filters. Bottle of 250 ml pack. 12 pcs. 19.50218 Duct shown in the case of bacterial contamination 23.16282 Antibacterial diesel 12 510 Motorboat components and spare parts - Separator filters, filters

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS HOSE Rubber hose corrugated, suitable for loading of diesel, bio-diesel and unleaded fuel engine on board pleasure boats up to 24 meters. Reference standards SAE J 1527: 2004 - USCG A1 R2 - ISO 7840: 2004 A1 EC. Tube approved CE 0474 RINA - LLOYD S REGISTER. Temperature: -30 C +100 C. Pressure 10 bar. Rubber hose for diesel fuel and unleaded gasoline on pleasure boats up to 24 meters. Regulations SAEJ 1527:2004 ISO 7840:2004 A1-USCGA1R1-EC. Approved CE 0474 - R.I.Na. LLOYD s REGISTER. Operating temperature - 30 C + 100 C. Operating pressure of 10 bar. Article Ø in mm. Ø out mm. curv. radius mm. Roll mt. 22.22326 25 35 40 10 22.22337 38 48 60 10 22.22351 51 61 75 10 Article Ø in mm. Ø out mm. Roll mt. 22.22307 10 8 17 22.22308 20 22.22309 10 10 19 22.22310 20 22.22312 12 22 20 22.22316 16 26 20 22.22320 19 30 20 22.22325 25 37 20 22.22330 30 42 20 22.22338 38 52 20 22.22340 40 54 10 22.22350 51 65 10 22.22360 60 74 10 Rubber hose for hot water and steam, connecting inter-coolers. Temperature range : -40 C - + 120 C. Working pressure 10 bar. Rubber hose coiled corrugated SCAMO / ASP for gas exhaust and cooling heat exchangers. Approved 0474 R.I.Na. LLOYD s REGISTER Operating temperature - 30 C + 100 C. Operating pressure of 3 bar. Article Ø in mm. Ø out mm. Roll mt. 22.22215 15 25 20 22.22218 18 28 20 Articolo Ø in mm. Ø out mm. curv. radius mm. Roll mt. 22.22430 30 40 45 20 22.22435 35 45 55 20 22.22440 40 50 65 20 22.22445 45 57 70 20 22.22450 50 60 75 20 22.22460 60 70 90 20 22.22470 70 80 105 20 22.22475 75 85 115 20 22.22480 80 93 120 10 22.22490 90 103 135 10 22.22500 102 113 150 10 22.22510 110 123 165 10 22.22520 120 134 180 10 22.22525 125 141 190 10 22.22530 130 143 195 10 22.22540 142 158 210 10 22.22550 152 167 230 10 For deliveries of less than standard package : plus 20 % on price-list. Motorboat components and spare parts - Hose 511

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS CLAMPS Hose-clamps S.S.AISI 316 ABA. Rounded edge protects hose from shearing.can be easily. Installed with a screwdriver, or a nutdriver. Can be used in highly corrosive surrounding, as chemical or food industry, beer industry and marine places. T-Bolts clamps Stainless Steel AISI 304, for heavy duty use to clamp high diameter hard hoses. Article Ø mm. Band width mm. Pack pcs. 22.22700 8-14 9 50 22.22701 11-17 9 50 22.22702 13-20 9 50 22.22703 15-24 12 50 22.22704 22-32 12 50 22.22705 26-38 12 50 22.22706 32-44 12 25 22.22707 38-50 12 50 22.22708 44-56 12 25 22.22709 50-65 12 50 22.22710 58-75 12 50 22.22711 68-85 12 50 22.22712 77-95 12 50 22.22713 87-112 12 25 22.22714 104-138 12 25 22.22715 130-165 12 25 22.22716 150-180 12 25 Article Ø mm. for hose Band Band thickness Bolt Ø in mm. width mm. mm. MA 22.22789 36-39 21 0,8 8 22.22790 40-43 21 0,8 8 22.22792 44-47 35 21 0,8 8 22.22791 48-51 40 21 0,8 8 22.22793 52-55 45 21 0,8 8 22.22794 56-59 50 21 0,8 8 22.22795 60-63 21 0,8 8 22.22796 64-67 50 fuel 21 0,8 8 22.22797 68-73 60 24 1,2 8 22.22798 74-79 24 1,2 8 22.22799 80-85 70-75 24 1,2 8 22.22800 86-91 80 24 1,2 8 22.22801 92-97 24 1,2 8 22.22809 98-103 90 24 1,2 8 22.22802 104-112 100 24 1,2 8 22.22803 113-121 110 24 1,2 8 22.22804 122-130 110-120 26 1,5 10 22.22805 131-139 125-130 26 1,5 10 22.22806 149-161 140-150 26 1,5 10 22.22807 162-174 150 26 1,5 10 Clamps AISI 304 stainless steel clamps covered with rubber ideal for supporting and fixing pipes, electrical cables, etc.. Band width 16 mm, hole attack Ø 6,4 mm. Article Ø mm. 22.22908 8 22.22910 10 22.22912 12 22.22916 16 Article Ø mm. 22.22920 20 22.22925 25 22.22930 30 512 Motorboat components and spare parts - Clamps

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS MUFFLERS, EXHAUSTS Article A mm. B mm. C mm. D hoses conn. 22.27275 150 105 372 40 22.27276 150 105 372 45 22.27277 150 105 372 50 22.27278 150 105 372 60 22.27279 150 105 372 75 22.27280 183 135 460 90 22.27281 183 135 460 102 Exhaust-muffler Its particular structure effectively contributes to the reduction of the noise emission. Articolo A mm. B mm. C mm. 22.27286 40-45-50 480 110 22.27287 40-45-50 480 110 Muffler in high density polyethylene. 22.22286 Muffler 22.22287 Muffler 22.22286 Muffler 22.22287 Muffler Article Hose connect Ø mm. Capacity lt. Engine power HP 22.27290 40-45-50 7 50 22.27293 55-60-65 20 115 22.27291 75-90 33 150 22.27292 100-115 33 300 Eltex muffler It reduces to minimum the engine exhaust noise. 22.27290 Muffler 22.27293 Muffler 22.27291 Muffler 22.27292 Muffler Article Hose connect Ø mm. Dims. mm. 22.27670 40 372x110x211h 22.27671 45 372x110x211h 22.27672 50 372x110x211h 22.27673 60 530x138x290h 22.27675 75 530x138x290h 22.27690 90 530x138x290h Plastic muffler It reduces to minimum engine exhaust noise. It collects water after engine switched off. Motorboat components and spare parts - Mufflers, exhausts 513

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS MUFFLERS, EXHAUSTS Muffler made of neoprene, suitable for engine exhaust system. Exhaust pipes with neoprene and stainless steel anti-vibration band, complete with clamp Exhaust protection valves made of rubber band with stainless steel, to be mounted on the exhaust terminals to prevent the return of water Article hose conn. Ø mm. Length mm. 22.27680 40/50 220 22.27681 50/60 350 Article hose conn.ø mm. Length mm. 22.27700 40/50 120 22.27701 50/60 127 22.27702 75/90 134 Article hose conn.ø mm Height mm. 22.27710 75 37 22.27712 100 37 Plastic Antisiphon When the entry point of the cooling water in the exhaust is located at less than 15 cm above the waterline, there is danger that, by turning off the engine, the cooling water entering the engine due to the siphon effect. Is positioned at least 40 cm above the waterline. Universal hose connect Ø mm. 13-19-25-32. Antisiphon with pressure valve Antisiphon with exhaust pipe and hose mt. 4 22.27101 Antisiphon 22.27102 Antisiphon Antisiphon for water-cooled engines to be inserted on the exhaust line. Universal hose Ø mm. 13-16-19-22-25-28,5-32-38. 22.27296 Antisiphon 514 Motorboat components and spare parts - Mufflers, exhausts, antisiphon

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS JERRYCANS, TANKS, TANK S VENTS, PRIMER BULB, ENGINE CONNECTOR Jerrycan in high density polyethylene for fuel, equipped with line level and graduated spout. Approved according to UNI certification. Fuel jerrycans Approved according to R.i.na. N. DIP/1410/00CS with vent cap and spout. 23.23428 Jerrycan spout length 300 mm. 23.23403 Spout for jerrycan 23.23404 Cup for jerrycan 23.23128 Cap for jerrycans and Hulk tank. Article Lt. Dim. mm. WxDxH Pack pcs 23.23400 6 265 x 145 x 260 4 23.23401 11 265 x 145 x 375 4 23.23402 22 380 x 225 x 355 3 Article Lt. Dim. mm. W.xDxH Pack pcs 23.23405 5 300 x 240 x 200 6 23.23410 10 300 x 240 x 250 5 23.23415 15 380 x 240 x 340 4 23.23420 22 380 x 240 x 440 3 Hulk fuel tanks built in orange eltex with hose connection and fuel fill line. Article Lt. Dims. mm. Pack pcs 23.23112 12 410x260x195h 6 23.23122 22 460x305x265h 5 23.23130 30 510x360x270h 3 23.23130 Tank 23.23122 Tank 23.23112 Tank Article Lt. Dims. mm. Pack pcs 23.23610 12 400x280x170h 6 23.23611 24 460x340x230h 5 23.23612 29 510x365x230h 4 Fuel tank complete with float and vent cap. Horizontal operation. Conforming to standards R.I.Na. / EC. Cup Vented cup with level indicator for models 23.23611/12 Article Length mm. For art. 23.23620 230 23.23610 23.23621 280 23.23611/12 23.23658 Spare vented cap, for plastic portable tanks 23.23612 Tank 23.23611 Tank 23.23610 Tank Motorboat components and spare parts - Jerrycans, tanks 515

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS JERRYCANS, TANKS, TANK S VENTS, PRIMER BULB, ENGINE CONNECTOR Graduated carafe for mixture. Dim. Ø 58 mm. h. 120 mm. Capacity 200 gr. of oil. Funnel With filter and extension 23.16004 Graduated carafe Funnel with filter 220 mm. with spout and flexible extension. 23.23370 Funnel, anti-splash design and complete with filter. Dim. Ø 180 mm., h. 240 mm. 23.23371 Spare filter for funnel and bailer-funnel. 23.23372 Extension Funnel Mr. Funnel The special filter in stainless steel Teflon coated does not allow water and dirtiness mixing with fuel, keeping clean the tank and avoiding engine damage. (23.23379 provided with a anti-deflagrating system) 23.23379 Funnel 23.23378 Funnel 23.23376 Funnel with filter Article Lt./min. Dims. mm. 23.23378 19 216x254h 23.23379 32 216x254h Fuel tank Hercules Model built in Eltex complete with suction hose Ø 10 mm and vent Ø mm.16. Prepared for the installation of floating VDO, VEGLIA, etc. Ri.Na. approved. Fuel tank Sogliola Model built in Eltex complete with suction hose Ø 10 mm and vent Ø mm.16. Prepared for the installation of floating VDO, VEGLIA, etc. Ri.Na. approved. Article Effective capacity Lt. Dims.mm. 23.23242 41 500x350x300h 23.23255 55 650x350x300h 23.23270 69 800x350x300h Article Effective capacity Lt. Dims.mm. 23.23245 38 650x350x220h 23.23260 49 800x350x220h 23.23280 75 1100x350x220h Accessories for ercole and sogliola tanks 23.23285 90 fitting to vent Ø. 16 23.23286 Breather nipple Ø mm. 10 23.23281 Straight Ø mm. 50 23.23282 Angled Ø mm. 50 516 Motorboat components and spare parts - Tanks funnel

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS JERRYCANS, TANKS, TANK S VENTS, PRIMER BULB, ENGINE CONNECTOR Fuel tanks made of polyethylene complete with inspection hatch, vented cap, Ø 10 mm suction and vent Ø mm.16. Suitable for mounting a second suction or return and sensor VDO, SLEEP, etc.. Ri.Na. approved. Fuel tanks made of polyethylene complete with inspection hatch, vented cap, Ø 10 mm suction and vent Ø mm.16. Suitable for mounting a second suction or return and sensor VDO, SLEEP, etc..ri.na. approved. Article Effective capacity Lt. Dims. mm. Sensor 23.23623 33 500x350x230h 23.23624 43 650x350x230h 54.03020 23.23625 53 800x350x230h 23.23636 42 500x350x300h 23.23637 55 650x350x300h 54.03028 23.23638 70 800x350x300h Add up mm. 30, due to pack size of the hatch Article Effective capacity Lt. Dims. mm. Sensor 23.23640 70 800x400x280h 23.23641 84 950x400x280h 54.03025 23.23642 96 1100x400x280h 23.23643 102 800x400x400h 23.23644 120 950x400x400h 54.03035 23.23645 140 1100x400x400h Add up mm. 30, due to pack size of the hatch ACCESSORI PER SERBATOI Connection kit to replace the original fuel filler cap, consist of: 1 straight threaded union. Ø mm. 38-50-60, 1 threaded coupling 90, 2 seals Spare vented cap for hatch art. 23.23655 and for plastic fixed tanks 23.23653 Fitting Kit fuel loading Inspection hatch complete with fittings for operation, made of hard nylon reinforced hatch, screw cap with breather, suction hose with 10 mm, with vent hose adapter mm. 17/19, blind flange to sensor, the second thread to blind suction or return diesel. 23.23659 Cup Mechanical level indicator to use with inspection hatch 23.23655 23.23655 Inspection hatch Article for tank 23.23660 23.23623/24/25 23.23661 23.23640/41/42 23.23662 23.23636/37/38 23.23663 23.23643/44/45 Motorboat components and spare parts - Tanks 517

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS JERRYCANS, TANKS, TANK S VENTS, PRIMER BULB, ENGINE CONNECTOR Rigid fuel tanks made of polyethylene, are CE certified in accordance with Directive 94/25/EC according to 10088. They form hull inverted trapezoidal cross section that follows the profile of the hull in order to maximize the space bilge. They are fitted with universal level sensor 10-180 ohm and 240-33 ohm, inserts for boarding, vent Ø mm. 16, float and return Ø mm 12. Each tank is individually tested. Color-neutral. 23.23180 Tank 23.23183 Tank 23.23184 Tank 23.23185 Tank Article Lt. Insert Ø mm. Hose W x L x H+ inspection hatch mm. 23.23180 40 40 1 806 x 287 x 258 + 40 23.23183 91 40/50 0 1085 x 545 x 220 + 40 23.23184 140 40/50 0 805 x 620 x 315 + 40 23.23185 191 40/50 1 1500 x 700 x 250 + 40 FOR MORE INFORMATION ABOUT THESE ARTICLES VISIT THE WEB SITE www.fni.it 518 Motorboat components and spare parts - Tanks

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS JERRYCANS, TANKS, TANK S VENTS, PRIMER BULB, ENGINE CONNECTOR Article Lt. Insert Ø mm. Hose Dim. mm. W x L x H 23.23186 160 40 1 1100 x 450 x 400 23.23187 207 40 1 980 x 580 x 440 23.23188 270 40 0 1100 x 685 x 395 23.23189 270 40 1 1300 x 560 x 447 23.23190 370 40 2 1300 x 930 x 390 23.23191 450 40 2 1500 x 880 x 380 Rigid fuel tanks made of polyethylene color-neutral, are CE certified in accordance with Directive 94/25/EC according to 10088. They are fitted with level sensor and universal 10-180 ohm 240-33 ohm, inserts for boarding Ø mm vent. 16 mm Ø and float. 12th Each tank is individually tested. 23.23186 Tank 23.23187 Tank 23.23188 Tank 23.23189 Tank 23.23190 Tank 23.23191 Tank Fuel black gauge for lever sensors and tubular 10-180 Ohm VDO Fuel Kit consists of: - Gauge black (art. 54.20137) with black frame round - 10-180 Ohms level sensor (art. 54.54102) - Mounting flange (art. 54.54105) - 8-pin cable (art. 54.54193) 54.00041 Indicator Tubolar sensor 10-180 Ohm for fuel tanks 54.03015 Length mm. 150 for art. 23.23245 54.03020 Length mm. 200 for art. 23.23623/624/625 54.03028 Length mm. 280 for art. 23.23636/637/638 54.54008 level gauge black (art. 54.20137) with black round frame 54.54008B as art. 54.54008 but with level gauge white (art. 54.20143) with white round frame Motorboat components and spare parts - Tanks, sensors 519

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS STAINLESS STEEL TANK VENTS Straight tank s vent Straight tank s vent perfectly flush mounting 23.23886 hose connection Ø mm. 16 Tank s vent - 90 23.20218 hose connection Ø mm. 16. Article A mm. B mm. C mm. D mm. E max E min G mm. 23.20214 44 76 41 16 41 13 35 23.20215 44 76 41 20 41 13 35 Tank s vent - 90 perfectly flush mounting Tank s vent in AISI 316 stainless steel and black nylon. perfectly flush mounting Article A mm. B mm. C mm. D mm. E max E min G mm. 23.20222 47 76 47 16 41 13 38 23.20223 47 76 47 20 41 13 38 Article Descr. A mm. B mm. C mm. D mm. E mm. 23.20224 straight 15 70 35 45 32 23.20226 curved 15 70 35 45 32 CHROMED BRASS TANK S VENT Tank s vent Straight Tank s vent Straight, perfectly flush mounting 23.23883 hose connection Ø mm. 16 23.23884 hose connection Ø mm. 20 23.23891 hose connection Ø mm. 16 Tank s vent - 90 Tank s vent 23.23890 hose connection Ø mm. 16 23.23895 hose 1. 520 Motorboat components and spare parts - Tank s vent

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS TANK VENTS IN BRASS Tank s vent in chromed brass Tank s vent Straight, perfectly flush mounting Tank s vent 23.20016 hose connection Ø mm. 16 23.20020 hose connection Ø mm. 20 Tank s vent - 90 perfectly flush 23.20116 hose connection Ø mm. 16. 23.23900 hose 1 23.23901 hose 1 1/2 NYLON TANK S VENT Tank s vent Straight, white, round Tank s vent - 90 Flush, white, round 23.23892 hose connection Ø mm. 16 23.23893 hose connection Ø mm. 16 Tank s vent Straight, flush, white, oval, Tank s vent - 90 Flush, white, oval, 23.23896 hose connection Ø mm. 16 23.23897 hose connection Ø mm. 16 Tank s vent Straight, fire-proof screen, hose connection Ø mm. 16 23.23887 black 23.23888 white Motorboat components and spare parts - Tank s vent 521

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS HOSE, PRIMER BULB, GRAFTS Fuel hose with polyester braided reinforcement, suitable also for gasoline. Rolls of 25 m. PVC hose 23.22206 Ø mm. 6 x 12 23.22208 Ø mm. 8 x 13 23.22210 Ø mm. 10 x 16 23.23302 for gasoline Ø 7x13 mm. with rubber primer bulb, length 2 m. 23.23304 for gasoline Ø 7x12 mm. with rubber primer bulb, length 2 m. Universal primer bulb for hose Ø mm. 8 High quality primer bulb for gasoline, very elastic and flexible. temperature range -20 C +60 C. 23.23310 Universal primer bulb 23.23314 for hose Ø mm. 8 23.23315 for hose Ø mm. 10 Tank-holder or battery-holder built in plastic resistant to gasoline and oils. Equipped with belt and adjustable buckles, and two pad eyes for fastening on the boat floor. Colour black. Dim. 48,5x34x3,5 cm. Belt to fasten batteries, tanks, etc. With pad eyes to fasten on the boat floor. Length 130 cm. 23.23297 Tank-holder 23.23298 Belt Universal saddle for tanks. Universal battery and tanks fasteners with belt 130 cm. 11.11308 Universal saddle 23.23299 Battery fasteners 522 Motorboat components and spare parts - Hose, primer bulb, grafts

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS HOSE, PRIMER BULB, GRAFTS OMC/Johnson/Evinrude fuel line connector 23.23320 Female 23.23321 Male tank 23.23322 Male with valve. 23.23323 Double male 23.23360 2-way connector Yamaha/Mariner/Mercury/Honda 23.23336 Female 23.23337 Male tank 23.23338 Male for motor 23.23339 Double male 23.23361 2-way connector Mercury Suzuki/Chrysler 23.23331 Female 23.23332 Male 23.23342 Female for motor 23.23343 Male Cock Cock Pair of fastening 23.23362 with 2 hose connect.s Ø mm. 10. 23.23363 with 2 hose connect.s Ø mm. 20. 23.23365 brackets for cock. GRAFT FUEL OMC/Johnson/Evinrude Yamaha/Mariner/Mercury 23.19591 Male fuel line connector with hose adapter 23.19593 Male threaded tank connector 23.19594 Female threaded 23.19490 Male fuel line connector with hose adapter 23.19492 Male threaded tank connector 23.19493 Female threaded Mercury/Mariner Honda threaded 23.19391 Male threaded tank connector 23.19393 Male fuel line connector with hose adapter 23.19394 Female threaded 23.19354 Female 23.19355 Male 23.19357 Female Selva - Tohatsu - Nissan threaded 23.19358 Female 23.19359 Male Motorboat components and spare parts - Engine connector 523

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS LUBRIFICANTS, GREASE, ADDITTIVIES Green Power TCW3 2 stroke oil Semi-synthetic engine oil for 2 stroke engines outboard new formula of high-performance choice for both competitions for tourist use. Provides high engine protection. Ideal for gasoline direct injection green generation. Has the Formula: BARDAHL POLAR PLUS. Specifications: NMMA TC-W3. 23.16200 Bottle 1 lt, pack 24 pz. 23.16204 Tank 4 lt, pack 6 pz. Direct Injection TCW3 2 stroke oil Ashless high performance synthetic oil. 2 stroke outboard engine with direct injection and high power. POLAR PLUS BARDAHL formula gives maximum engine protection and effective lubrication even under the most severe. Specifications: NMMA TC-W3. Tank 4 lt, pack 6 pz. 23.16210 Oil Aquabike Racing 2 stroke oil Synthetic oil of superior quality, designed to provide maximum protection and cleaning of 2 stroke engines of personal watercraft. Has the Formula: BARDAHL POLAR PLUS Specifications: API TC / JASO FC / ISO - L - EGD. Bottle 1 lt, pack 24 pz 23.16220 Oil Green Power Four C60 10W-30 4 stroke oil Premium performance lubricant for gasoline outboard and last generation sterndrive 4T that require high performance lubricants WITH requirements NMMA FC-W and FC-W (CAT). Superior control of wear even in high dilution of the oil with gasoline, increased longevity and cleanliness of all parts of the engine, the protection from salt corrosion and rust. Preserves the functionality of the catalysts. Formula 100% Synthetic. Contains Formula: BARDAHL POLAR PLUS. API SM, NMMA FC-W (CAT). 1 liter bottle, conf. 24 pcs. 23.16225 Oil BM7 T-SYNTH 10W-40 4 stroke oil It s a high quality multigrade oil-based semi-synthetic for all gasoline and diesel engines, naturally aspirated and turbocharged engines. The particular nature of the bases adopted eyepiece choice of a technologically advanced additive package, ensures consistent performance and excellent behavior in service. Has the Formula: BARDAHL POLAR PLUS. ACEA A3 B3 API SL-CF, MB 229.1, VW 501.01 505.00. 23.16230 Bottle 1 lt, pack 24 pz 23.16234 Tank 200 lt 524 Motorboat components and spare parts - Lubrificants, addittivies

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS LUBRIFICANTS, GREASE, ADDITTIVIES BM7 10W-40 HIGH Protection 4 stroke oil BM7 10W-40 HIGH PROTECTION. Mineral multigrade lubricant of high quality suitable for heavy diesel engines. Ensures consistent performance and excellent behavior even in harsh conditions. Has the Formula: BARDAHL POLAR PLUS. Specifiche SAE 10W-40, ACEA (04) E2 / ACEA (02) E5-E3-B3- A2, API CH-4 / CG-4 / CF-4 / SJ, MB 228.3 229.1 / MAN M3275 / VOLVO VDS 2 / RVI RLD RD-2 / Mack EO-M Plus / CUMMINS CES 20.072/1/6/7. Tank 25 lt. 23.16250 Oil Mineral multigrade lubricant of high quality suitable for heavy diesel engines. Ensures consistent performance and excellent behavior even in harsh conditions. Has the Formula: BARDAHL POLAR PLUS. API E2A2B3 15W40 ACEA, API CH4SJ, 228.1 MB 229.1, MAN 271, VOLVO VDS2, CUMMINS 20071 / 6 BM7 15W-40 HIGH Protection 4 stroke oil 23.16254 Tank 4 lt, pack 6 pz. 23.16257 Tank 25 lt 23.16259 Tank 200 lt Full mineral lubricating oil for diesel engines. The exclusive additive with anti-friction BARDAHL POLAR PLUS FORMULA ensures maximum effectiveness of lubricating the engine with a friction-reducing significantly higher than conventional lubricants. Maximum protection against wear, excellent high temperature stability, superior anti-oxidant characteristics and high power detergent - dispersant allows to extend the oil change interval. Technical specifications: SAE 15W-40, ACEA / 04) E7-A3- B3-B4 / API CL-4 SL, MB 228.3-229.1 / 3275 MAN / VOLVO VDS 3 / RVI RLD-2 / Mack EO-M Plus / ZF TE-ML 07C / ECF1 CAT / CUMMINS 20071-8 Turbo Diesel 15W-40 4 stroke oil 23.16306 Tank 25 lt. 23.16308 Tank 200 lt. ATF Speed D III ISO 32 Hydraulic lubricating Hydraulic lubricating oil of the highest quality. Prevents hardening of seals, foaming, oxidation of the oil. Contains anti-wear additives and corrosion inhibitors. Has the Formula: BARDAHL POLAR PLUS. Specifications: DENISON HF-0, EATON VICKERS M-2950-S/I286-S, CINCINNATI MACHINE P-68/P69/ P70, DIN 51524 PART2 Bottle 1 lt, pack 24 pz. 23.16260 Hydraulic lubricating Motorboat components and spare parts - Lubrificants, addittivies 525

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS LUBRIFICANTS, GREASE, ADDITTIVIES T&D Synthetic Oil 75W-90 Trasmission oil Lubricant with outstanding EP (extreme pressure) make it suitable for any type of gear and trasmission requiring an advanced lubrication technology (Evinrude, Mercury and Volvo feet). Contains Formula: BARDAHL POLAR PLUS. SAE 75W-90 (API GL4 GL5 MT1). Bottle 1 lt, pack 24 pcs. 23.16237 Oil Outboard Gear Oil EP90 Stern drive oil Special lubricant for gear systems of stern drives, outboard motors and feet of marine transmissions. The outstanding EP, antiwear and antifoam allow optimal lubrication and gear protection even when heavily loaded and in the most demanding conditions. Maximum protection of gears against wear, rust and corrosion, increased longevity and cleaning of all mechanical components. High resistance against thermal degradation and oxidation. Has the Formula: BARDAHL POLAR PLUS. Specifications: API GL-4 and GL-5 - SAE 80W 90 Tube 250 ml, pack 24 pz. 23.16240 Stern drive oil T&D Gear Oil 80W-90 Trasmission oil Designed for any type of transmission that require lubrication technology advanced. High resistance to the toughest conditions of use. Has the Formula: BARDAHL POLAR PLUS. SAE 80W-90 (MT1 API GL5 / ZF TE-ML 05A, 07A, 12E, 16B, 17B, 19B. 23.16241 Bottle 1 lt, pack 24 pcs. 23.16242 Tank 25 lt. Outboard Grease Grease Special grease repellent soap calcium fortified with antioxidants, anti-rust and wear, suitable for the lubrication and mechanical protection of the marine engines in / out board, remote controls, submersible pumps and moving parts exposed to water. Protect from moisture and aggressive water with high salt content. High resistance to water washout. Protects surfaces from rust, corrosion and wear. Rating: NLGI 2. Tube 250 ml, pack 24 pz. 23.16247 Grease M.P.G. Plus E.P. Grease Multi-Purpose Lithium Grease superior reinforced with powerful anti-wear and EP additives. It works by forming a molecular lubricant film that fixating on the metal creates a protective barrier, preserving the surface oxidation and the attack of corrosive chemicals. Resists water washout. Contains Formula: BARDAHL POLAR PLUS. Tube 250 ml pack. 24 pcs. 526 23.16248 Grease Motorboat components and spare parts - Lubrificants, grease, addittivies

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS LUBRIFICANTS, GREASE, ADDITTIVIES Multifunctional additive for diesel engines. Lubricates and protects the fuel injection pump, improves efficiency and engine performance, increases the cetane number, cleaning the injectors and hydrolyzing the condensation. Reduces fuel consumption by up to 6% and the flue gases up to 60%. It should be added to diesel fuel directly into the tank, the rate of 2 per thousand. It is recommended for use every 2 full. Bottle 1 lt, pack 24 pz. Top Diesel Additive 23.16274 Additive Multifunctional additive for gasoline. Lubricates and protects the entire fuel system, cleans injectors, improves efficiency and engine performance. It contains a catalyst that improves combustion by increasing the octane number. Decreases and thereby reduces the unburned fuel consumption. Use 4 per thousand. Bottle 250 ml, pack 24 pz. Top Benzina Additive 23.16275 Additive Diesel Injector Cleaner Additive Diesel fuel additive with cleaning action on the injectors, combustion chambers, valves, fuel injection pumps and pipelines, restores optimum engine performance, reducing noise and power consumption by eliminating exhaust black fumes and easier cold starts. Pour into the tank every 100 hours of motion, with approximately 20 liters. of diesel fuel, a bottle of the product. Bottle 500 ml., Pack of 12 pcs. 23.16276 Additive Additive for gasoline with cleaning action on power circuits, combustion chambers, valves, pumps, injector nozzles and piping, restores optimum engine performance by reducing noise, fuel consumption, gases and polluting exhaust fumes facilitating the departures cold. Excellent dispersion properties of water and humidity. Pour a bottle of product in the tank every 100 hours of running. Bottle 300 ml., Pack of 12 pcs. Fuel Injector Cleaner Additive 23.16277 Additive Water Remover (water dispersant) Additive The presence of water in the tank has the following problems: corrosion, poor combustion, the acceleration tears, difficulty in cold starting, loss of water dispersant performance.il BARDAHL solves all these problems. It has been formulated for all gasoline and diesel, normal or turbocharged engines. Lead-free Product is compatible with the catalysts. 1 bottle every 60 gallons of tank capacity. Bottle 300 ml, pack 24 pz. 23.16278 Additive Motorboat components and spare parts - Addittivies 527

ACCESSORI, RICAMBI MOTORE - MOTORBOAT COMPONENTS AND SPARE PARTS LUBRIFICANTS, GREASE, ADDITTIVIES Antibacterial diesel Effective biocide formulated to protect the oil against the attack of bacteria, fungi and algae. Its action helps to prevent corruption of the mass of liquid to clean tanks, pipes, even underground, and supply tanks. The possible presence of water in the fuel in it and the proliferation of bacteria, fungi and spores, can cause changes in the oil and encourage the formation of sludge and deposits on the bottom of the tank, causing the clogging of filters. Bottle 250 ml, pack 12 pz. 23.16282 Additive Hot Fuel Additive Diesel fuel additive formulated to allow the cold start of diesel engines even at temperatures below -25 c. Prevents the formation of paraffin crystals typical of low temperatures and lowers the freezing temperature of improving combustion and creating a lubricating thin and protective layer of all components of the injection system. Pour one bottle of product in the tank every 20 lt. capacity Bottle 1 lt, conf.24 pcs. 23.16286 Additive Lubrificant protective Protection for winches, reels, parts of the engine. Content ml. 60, pack of 18 pieces 23.16295 Lubrificant Antigelo Eco Blu Antifreeze Special fluid for cooling circuits ideal for marine engines. Environmentally friendly, with corrosion inhibitor, protects the metal parts of the circuits and the gaskets. Can be used pure or diluted starting from 50% for -40 C for up to 25% for -12 C. 23.16410 Bottle 1 lt, pack 12 pcs 23.16411 Tank 4 lt Grease It s a white grease of special formulation, its great tackiness and the high contents of zinc oxide make it particulary fit to protect, to lubrificate and toavoid the locking of bolts, clamps, joints, leverages, locks equipment and engines working in sea ambients with corroding action of salt water. Gear Oil with high characteristics of E.P. Contain additive against wear and corrosion. It is especially indicated for lubrification of underwater gears of outboard engines and stern drives. 64.64600 tube ml. 250 pack. 24 pcs. 64.64601 bucket It. 5 64.64605 tube ml. 250 Conf. 24 pz. 528 Motorboat components and spare parts - Lubrificants, grease, addittivies

ALUMINIUM ANODES KIT Kit Mercury Verado 4 / Optimax aluminium 26.40000 Anodes Kit Contains: Ref. original Q.ty 818298 1 826134 2 762145 1 Kit Mercury Verado 6 aluminium 26.40001 Anodes Kit Contains: Rif. originale Q.ty 880653 1 892227 4 826134 2 762145 1 Kit Mercruiser Kit Mercruiser Bravo II from 1989 and Bravo III from 1989 to 2003 26.40011 Anodes Kit Contains: Ref. original Q.ty 762145 1 821630 1 806190 2 Kit Mercruiser Alpha I generation II from 1991 26.40012 Anodes Kit Contains: Ref. original Q.ty 762145 1 806105 1 821629 1 821631 1 806189 2 Motorboat components and spare parts - Anodes Kit 529

ALUMINIUM ANODES KIT Kit Mercruiser Bravo III from 2004 26.40013 Anodes Kit Contains: Ref. original Q.ty 762144 1 762145 1 865182C 1 821630 1 806190 2 Kit Mercruiser Alpha I generation I from1983 to 1990 26.40014 Anodes Kit Contains: Rif. originale Q.ta 31640 1 55989 2 821631 1 Kit Mercruiser Bravo I from 1988 26.40015 Anodes Kit Contains: Ref. original Q.ty 762145 1 806188 1 821630 1 806190 2 Kit Yamaha 150-200 HP outboard 26.40020 Anodes Kit Contains: Ref. original Q.ty 6G54525101 1 6J94537101 1 530 Motorboat components and spare parts - Anodes Kit

ALUMINIUM ANODES KIT Kit Yamaha 150-200 HP outboard - counter 26.40021 Anodes Kit Contains: Ref. original Q.ty 6G54525101 1 6K14537102 1 Kit Yamaha 200-250 HP outboard 26.40022 Anodes Kit Contains: Ref. original Q.ty 6G54525101 1 61A4537100 1 Kit Yamaha 200-300 HP outboard 60 30 26.40023 Anodes Kit Contains: Ref. original Q.ty 6G54525101 1 69L4537100 1 Kit Yamaha 60-90 HP outboard 26.40024 Anodes Kit Contains: Ref. original Q.ty 6H145251-03 1 68845371-02 1 Motorboat components and spare parts - Anodes Kit 531

ALUMINIUM ANODES KIT Kit Yamaha 40-60 HP 4T outboard 26.40025 Anodes Kit Contains: Ref. original Q.ty 65W-45251-00 3 67C-45251-00 1 67C-45371-00 1 Kit Yanmar SD20,30,31,40,50 saildrivers 26.40115 Anodes Kit Contains: Ref. original Q.ty 19644002660 1 Kit Volvo Penta propeller 3 blades engine D2-55A,B,C,D,E,F 26.40130 Anodes Kit Contains: Ref. original Q.ty 3858286 1 Kit Volvo Penta SX-A/DPS 26.40131 Anodes Kit Contains: Ref. original Q.ty 3841427 1 3883728 1 532 Motorboat components and spare parts - Anodes Kit

ALUMINIUM ANODES KIT Kit Volvo Penta DPH 26.40132 Anodes Kit Contains: Ref. original Q.ty 3588745 1 3863206 1 Kit Volvo Penta 280 26.40133 Anodes Kit Contains: Ref. original Q.ty 875815 1 832598 1 Kit Volvo Penta 280 dual prop 26.40134 Anodes Kit Contains: Ref. original Q.ty 875821 1 832598 1 Kit Volvo Penta SX 26.40135 Anodes Kit Contains: Ref. original Q.ty 3855411 1 3854130 1 Motorboat components and spare parts - Anodes Kit 533

ALUMINIUM ANODES KIT Kit Volvo Penta 290C 26.40138 Anodes Kit Contains: Ref. original Q.ty 875815 1 852835 1 872793 2 Kit Volvo Penta Duo-prop 290C 26.40139 Anodes Kit Contains: Ref. original Q.ty 875821 1 852835 1 872793 2 Kit Honda BF 75-90-115-130 26.40200 Anodes Kit Contains: Ref. original Q.ty 41107-ZW1-B01ZA 1 06411-ZW1-000 1 41109-ZW1-B00 2 534 Motorboat components and spare parts - Anodes Kit

ZINC ANODES CATHODE PROTECTION Anode weld-on Anode rectangular A B D 26.26007 Anode Zinc A mm. B mm. D mm. Kg 26.26001 110 63 26 1,0 26.26002 200 70 25 1,8 26.26006 215 70 29 2,2 26.26007 165 100 42 3,0 Zinc A mm. B mm. C mm. D mm. Kg 26.26010 73 48 50 10 0,330 26.26013 110 67 57 20 0,970 26.26016 130 50 77 17 0,685 26.26018 190 54 76 24 1,450 Anode oval Anode Fair line anodes Zinc A mm. B mm- C mm. D mm. Kg 26.26027 150 60 80 25 0,970 26.26028 250 63 140 29 2,300 26.26020 290 55 200 30 2,700 Zinc A mm. B mm. C mm. D mm. Kg 26.26040 200 65 110 tot. 32 1,3 26.26041 320 65 110-210 35 2,2 26.26042 455 90 230 40 7,0 Round flange for rudder Anode Round transom anode Aluminium Magnesium Zinc Ø mm. Ø hole mm. 26.26050A 26.26050M 26.26050 50 6.5 26.26051A 26.26051M 26.26051 70 8.5 26.26052A 26.26052M 26.26052 90 8,5 26.26053A 26.26053M 26.26053 110 10,5 26.26055A 26.26055M 26.26055 125 11,5 26.26054A 26.26054M 26.26054 140 12.5 Zinc Ø mm. H mm. Ø 1 mm. Ø 2 mm. Weight Kg. 26.26060 120 35 50X3 32 2,05 Anode round for stern Anode round for stern Zinc Ø mm. H mm. Ø 1 mm. Ø 2 mm. Weight Kg. 26.26062 100 40 40 12.5 1.85 26.26063 125 38 50 14.5 2.69 26.26064 140 30 50 14.5 2.72 26.26065 zinc, equipped with bolt and cap Ø mm. 135 x 47, kg. 4,17 26.26066 zinc, anode alone, Ø mm. 135 x 47 kg. 3,95 Motorboat components and spare parts - Anodes cathode protection 535

ANODE CATHODE PROTECTION Anode Oval anodes mm. 85x40x15, zinc Anode Oval anodes mm. 145x40x20, zinc 26.26072 anode 26.26073 anode Anode Shaft nut anode Radice type, with taper universal thread Anode Spare conical shaft anode Radice type. Side fastening Zinc Ø shaft mm. Ø thread mm. 26.26101 22-25 16x1,5 26.26102 30 20x1,5 26.26103 35 24x2 26.26104 40 24x2 26.26105 45 33x2 26.26106 50 36x3 26.26108 55 40x3 26.26107 60 45x3 Magnesium Zinc Ø shaft mm. A mm. B mm. H mm. 26.26110M 26.26110 22-25 33 25 39 26.26111M 26.26111 30 42 32 53 26.26112M 26.26112 35 46 38 61 26.26113M 26.26113 40 51 42 68 26.26114M 26.26114 45 61 48 76 26.26115M 26.26115 50 73 57 84 26.26117M 26.26117 55 75 65 87 26.26116M 26.26116 60 82 71 98 26.26118 70-80-90-100 98 84.5 98 26.26119 110 160 130 134 Anode Spare conical shaft anode Radice type, hexagonal screw.. Stain Steel washer for Radice shaft anode Magnesium Zinc Ø shaft mm. A mm. B mm. H mm. 26.26133M 26.26133 22-25 34 22 39 26.26134M 26.26134 30 43 27 53 26.26135M 26.26135 35 46 32 62 26.26136M 26.26136 40 52 36 67 26.26137M 26.26137 45 61 41 76 26.26138M 26.26138 50 73 46 84 26.26126M 26.26126 55 75 50 87 26.26139M 26.26139 60 82 55 98 Article Ø shaft mm. A mm. B mm. 26.26091 22-25 38 17 26.26092 30 46 20 26.26093 35 51 24 26.26094 40 53 24 26.26095 45 66 33 26.26096 50 76 37 26.26098 55 81 40 26.26097 60 90 45 536 Motorboat components and spare parts - Anodes cathode protection

ANODE CATHODE PROTECTION Anode Riva shaft nut anode with brass cone Anode Spare Riva shaft nut anode F Zinc Ø shaft mm. Ø thread mm. A mm. H mm. 26.26120 22 16x1,5 38 65 26.26121 25 18x1,5 38 65 26.26122 30 20x1,5 38 65 26.26123 35 24x2 52 88 26.26124 40 26x2 52 88 26.26125 45 30x2 52 88 Zinc Ø shaft mm. A mm. H mm. 26.26127 20-25-30 38 37 26.26128 35-40 52 59 26.26129 45 52 59 Anode Spare shaft nut anode with horizontal pin. Anode Spare shaft nut anode with squared pin, thread M36x3 Zinc Ø shaft mm. Ø mm. Ø 1 mm. Ø 2 mm. h mm. 26.26130 20-22-25-30 38 29 8 38 26.26131 35-40 52 40 8 50 26.26132 45 66 46 8 73 Zinc Magnesium A mm. B mm. H mm. Ø mm. Ø 1 mm. 26.26970 26.26970M 46.5 45 85 68.5 54 Anode Spare shaft nut anode Solé Suspended anode complete with mt. 6 PVC coated stainless steel cable and terminal for electrical connection. Zinc Aluminium Ø mm. Ø 1 mm. H mm. 26.26975 26.26975M 32 24 39 26.26976 26.26976M 37 26 46 26.26977 26.26977M 47 36 60 26.26978 26.26978M 55 45 70 Article Material Ø mm. H mm. Weight kg 26.26079 Zinc 2,5 26.26079A Aluminium 80 105 0,98 26.26079M Magnesium 0,63 Suspended anode series 4 Tech complete with mt. 6 stainless steel cable. Round rod anode Length 400 mm. Zinc Ø mm. 26.26080 10 26.26084 14 26.26086 16 Zinc L mm. A mm. H. mm. Peso kg 26.26081 190 38 19 0,9 26.26088 18 26.26090 20 Motorboat components and spare parts- Anodes cathode protection 537

ANODE CATHODE PROTECTION Collar for propeller shafts Collar for propeller shafts Zinc Ø shaft mm. H mm. 26.26140 20 56 26.26141 25 56 26.26142 30 56 26.26143 32 56 26.26144 35 66 26.26145 38 66 26.26146 40 77 26.26147 45 77 26.26148 50 88 26.26152 55 88 26.26149 60 100 Zinc Ø shaft mm. H mm. 26.26150 70 107 26.26151 75 107 26.26154 90 112 Collar anode where there is a small place available. Collar max prop Aluminium Magnesium Zinc Ø shaft mm. H mm. 26.26162A 26.26162M 26.26162 20 25 26.26163A 26.26163M 26.26163 25 25 26.26164A 26.26164M 26.26164 30 25 26.26165A 26.26165M 26.26165 35 25 26.26166M 26.26166 40 20 26.26167 45 20 Zinc Ø mm. A mm. H mm. 26.26177 92 42 25 26.26178 92 46 25 Ogive MaxProp a, 3 holes Ogive MaxProp, 6 holes H A Zinc Ø mm. A mm. H mm. 26.26170 65 38 42 26.26171 72 42 43 26.26172 84 46 60 26.26173 100 52 61 26.26174 120 81 78 Zinc Ø mm. D mm. H mm. F mm. 26.26185 61 39 38 6,5 26.26186 68 44 43 6,5 26.26187 80 47 55 8 538 Motorboat components and spare parts - Anodes cathode protection

HEAT EXCHANGERS ANODES AIFO-FPT Heat exchangers anodes VM Heat exchangers anodes 26.26190 Anode Zinc Ref. Original A Ø mm. B mm. C Ø mm. D mm. 26.26180 8105277 14 26 12 8 26.26181 8210M22-8101772 20 20 14 11 26.26182 10 23 4,5 8 26.26183 8109743 10 18 7 8 26.26184 8105277 13 26 10 8 26.26190 14 40 8MA 10 Zinc A Ø mm. B mm. C D mm. 26.26190 14 40 8MA 10 26.26191 14 20 8MA 10 26.26192 14 20 10MA 10 Caterpillar Heat exchangers anodes Bukh Heat exchangers anodes Zinc A Ø mm. B mm. C D mm. 26.26195 12 35 5MA 12 Zinco Original Ref. A Ø mm. B mm. C D mm. 26.26195 6L2280 12 35 5MA 12 26.28120 6L2283 10 55 1/4UNC 11 26.28121 116-7011 9 35 1/4UNC 11 26.28122 6L2016 22 20 5/8UNC 11 26.28123 6L2289 16 76 3/8UNC 13 26.28124 6L2288 16 63 3/8UNC 13 26.28125 5B9651 16 51 3/8UNC 13 26.28126 6L2284 14 33 5/16UNC 12 26.28127 6L2286 28 55 3/4UNC 20 26.28128 7E5076 16 41 7/16UNF 9 26.28129 6L2280G 12.5 38 7/16UNF 11 26.28130 6L3104 10 38 1/4UNC 10 Lombardini Heat exchangers anodes Zinc A Ø mm. B mm. C Ø mm. D mm. 26.26180 14 26 12 8 26.26183 10 18 7 8 26.26184 13 26 10 8 BOW TRUST ANODES Ogive zinc bow truster MAX POWER ogive. Ogive Bow truster SIDE POWER ogive (Or. Ref. 201180) 18 26.26198 Ogive Aluminium Zinc 26.26199A 26.26199 Motorboat components and spare parts - Heat exchangers anodes/ Bow trust anodes 539

BOW TRUST ANODES Ogive Zinc bow thrust SIDE POWER anode series AZ. Ogive Zinc bow thrust SLEIPNER SP125 anode (OEM 101180) 26.26620 Ogive 26.26621 Ogive Ogive bow thrust SIDE POWER SLEIPNER SP55/75/95 (rif. or. 71190/51180) Ogive Zinc bow thrust VETUS anode 68 6,5 55 56 Aluminium Zinc 26.26622A 26.26622 26.26623 Ogive Ogive Zinc bow thrust VETUS anode Hexagonal Ogive Zinc bow thrust VETUS anode. 84 6,5 52 56 26.26624 Ogive 26.26625 Ogive Hexagonal Ogive Zinc bow thrust VETUS (Or. Ref. BP1210). Hexagonal Ogive Zinc bow thrust VETUS. 26.26626 Ogive 26.26627 Ogive Anode Bow thrust VETUS anode series KGF25 (OEM BP1221) Anode in zinco per bow thrust VETUS serie KGF35/55 (Or. Ref. BP1126) 26.26628 Anode 26.26629 Anode 540 Motorboat components and spare parts - Bow trust anodes

BOW TRUST ANODES Anode Bow thrust VETUS series KGF75/95 (OEM BP1185) Anode Bow thrust VETUS anode series KW3 (OEM BP129) 26.26630 Anode 26.26631 Anode Ogive Bow thrust LEWMAR anode Zinc Type A mm. B mm. C mm. D mm. H mm. Ref. Original 26.26632 S serie 140 38 25 18 9 13 589150 26.26633 M serie 185 46 33 24 11 15 589350 26.26634 L serie 250/300 62 45 34 17 18 589550 Anode In zinc Anode In zinc 26.26635 Quick BTQ-140 propeller 26.26636 Quick BTQ-185 propeller 26.26637 Quick BTQ-250 propeller 26.26638 Quick BTQ-300 propeller Ogive Side Power-Sleipner ogive (Or. Ref. 61180) Ogive Side Power-Sleipner (Or. Ref. 501180) Aluminium Zinc Ø mm. Ø1 mm. Ø2 mm. H mm. 26.26640A 26.26523 26 10 7 20 Aluminium Zinc A Ø Ø1 Ø2 H 26.26641A 26.26641 30,6 73 46 8,5 53 Ogive Side Power-Sleipner (Or. Ref. 31180) Ogive J-PROP propeller Aluminium Zinc Ø mm. Ø1 mm. H mm. 26.26642A 26.26642 25,6 5,2 15,2 Zinc Ø mm. Ø1 mm. Ø2 mm. Ø3 mm. H mm. 26.26690 60 34,5 8 5 26 26.26691 80 39,5 10 5 33,5 26.26692 90 49,5 10 6 37 Motorboat components and spare parts - Bow trust anodes 541

O.M.C.-EVINRUDE-JOHNSON ANODES Plate anode for outboard motors from 2 up to 150 HP (Or. Ref. 173029) Cube anode for outboard motors 50-140 HP (Or. Ref. 436745/393023/983315) Aluminium Magnesium Zinc 26.26200A 26.26200M 26.26200 Aluminium Magnesium Zinc 26.26201A 26.26201M 26.26201 Plate anode for outboard motors 50-75 HP (Or. Ref. 382461) Plate zinc anode for outboard motors 90-140 HP (Or. Ref. 392461/392123) Aluminium Zinc 26.26202A 26.26202 26.26203 Plate anode Plate O.M.C. alveolar bar anode for transom Plate O.M.C. alveolar plate anode for engine from 100 up to 245 HP 26.26204 Plate anode Plate Small zinc anode for outboard engines 4-4,5-6-7,5-8 HP (Or. Ref. 432397) 26.26205 Plate anode Plate anode for O.M.C. Cobra 80 HP (Or. Ref. 982277) 26.26206 Plate anode Aluminium Zinc 26.26207A 26.26207 Plate anode for O.M.C. lower block (Or. Ref. 984547/983952) Plate anode for O.M.C. upper block (Or. Ref. 984513-3853818) 26.26208 Plate anode Aluminium Zinc 26.26209A 26.26209 542 Motorboat components and spare parts - O.M.C.-Evinrude-johnson anodes

O.M.C. EVINRUDE - JOHNSON ANODES Cube anode for O.M.C. Cobra 60/280 HP block Plate anode for O.M.C. Cobra low (Or. Ref. 984547) Aluminium Magnesium Zinc 26.26210A 26.26210M 26.26210 26.26211 Plate anode Cube anode outboard 60-280 HP (4V-6V) (or. ref. 398331/433458) Double plate anode for Johnson 521 Evinrude 20-25 HP 70-120 HP and more, engines before 1990 (or. ref. 434029) Aluminium Magnesium Zinc 26.26214A 26.26214M 26.26214 26.26217 Double plate Collar anode for O.M.C. 737 (or. ref. 398873) Plate anode for Diabolo 70-120 HP (or. ref. 431708) 26.26219 Collar 26.26220 Plate anode Bar anode 60-175 HP (or. ref. 433580) Plate O.M.C. Cobra (or. ref. 986158) Aluminium Magnesium Zinc 26.26221A 26.26221M 26.26221 Plate O.M.C. Cobra 5700 (or. ref. 987067) 26.26222 Plate anode Plate 8-9,9-15 HP (or. ref. 338635) 26.26223 Plate anode 26.26224 Plate anode Motorboat components and spare parts - O.M.C.-Evinrude-johnson anodes 543

O.M.C. EVINRUDE - JOHNSON ANODES Plate anode KING Cobra O.M.C. (or. ref. 3854130) Plate zinc anode 225 HP Aluminium Magnesium Zinc 26.26225A 26.26225M 26.26225 26.26226 Plate Fin anode outboard motor 55 HP and O.M.C. stern-drive Plate Large alveolar plate zinc anode for O.M.C. 100/245 HP (or. ref. 982438) 26.26227 Fin anode 26.26228 Plate Ring anode 3,5/5/6 HP 4T (or. ref. 5031705) Fin 70 HP 4T (or. ref. 5032929) Aluminium Magnesium Zinc 26.26229A 26.26229M 26.26229 Aluminium Magnesium Zinc 26.26230A 26.26230M 26.26230 Cube (or. ref. 397768) Doble anode plate (or. ref. 389999) Aluminium Magnesium Zinc 26.26231A 26.26231M 26.26231 Plate anode 40 HP 4T (or. ref. 5034522-5034616) 26.26232 Plate Fin 75-85 HP Aluminium Magnesium Zinc 26.26756A 26.26756M 26.26756 Aluminium Magnesium Zinc 26.26801A 26.26801M 26.26801 544 Motorboat components and spare parts - O.M.C.-Evinrude-johnson anodes

ANODES MERCURY - MERCRUISER Small plate zinc anode Ring zinc anode 40 HP 4T 26.26802 Small Plate 26.26804 Ring Small plate zinc anode 40/50 HP 4T Anode 2-4-6-8HP (or. ref. 55320-95500) 26.26805 Small plate 26.26806 Zinc anode Small plate zinc anode 9,9-15 HP (or. ref. 55321-93900) Small plate zinc anode 2 HP (or. ref. 55320-98400) 9,9-15 HP 4T (or. ref. 41811-98500) Plate zinc anode for 90-115 HP. DF 115-140 (or. ref.. 55321-90J01) 26.26808 Small plate 26.26810 Small plate 26.26812 Small plate ANODI MERCURY - MERCRUISER Short fin anode for 50 HP (or. ref. 31640Q4) Long fin zinc anode for stern-drive 80-140 HP (or. ref. 34127A1) Aluminium Magnesium Zinc 26.26300A 26.26300M 26.26300 Plate zinc anode for outboard motor 20 HP (or. ref. 47820A1) 26.26301 Long fin Fin zinc anode for 25 HP (or. ref. 94286T - 822777Q1) 26.26302 Plate 26.26303 Fin Motorboat components and spare parts - O.M.C.-Evinrude-johnson / Mercury - mercruiser anodes 545

MERCURY MERCRUISER ANODES Plate zinc anode, for general use also for Mercury on transom dims. mm. 64x64x10 (or. ref. 34762A1) Nut anode for block plate Mercruiser ALPHA ONE - BRAVO ONE (or. ref.. 55989Q9) 26.26304 Plate Aluminium Magnesium Zinc 26.26305A 26.26305M 26.26305 Small plate zinc anode outboard 4,5-7 HP (or. ref. 09411) Fin America zinc anode 25 HP1990 (or. ref. 984325) 26.26306 Small plate 26.26307 Fin Plate Mercruiser 90-100HP, Mercury 50-60-75HP, Super America 80-115HP (or. ref. 71320A3-43396) Plate Mercury ALPHA ONE -Bravo I-II-III (or. ref. 821631A1-43994A2) 26.26308 Plate 26.26309 Plate Small plate 6/9,9HP (or. ref. 42121A) Plate Mercruiser ALPHA ONE - ALPHA II GEN (or. ref. 515933A1/821629Q1) 26.26310 Small plate Aluminium Magnesium Zinc 26.26311A 26.26311M 26.26311 Fin Mercruiser ALPHA ONE-Bravo I-II-III 50-140 HP (or. ref. 46399A) Plate Screw-on plate anode 40-60 HP, (or. ref. 43396A2/81898Q1) Aluminium Magnesium Zinc 26.26312A 26.26312M 26.26312 Aluminium Magnesium Zinc 26.26313A 26.26313M 26.26313 546 Motorboat components and spare parts - Mercury mercruiser anodes

MERCURY - MERCRUISER ANODES Anticavitation plate zinc anode BRAVO I-II-III (or. ref. 821630Q1) Collar ALPHA ONE (or. ref. 806189Q1) 26.26314 Plate Aluminium Magnesium Zinc 26.26315A 26.26315M 26.26315 Small plate outboard 75/225 HP (or. ref. 826134) Collar ALPHA ONE - II GEN (or. ref. 806105Q1) Aluminium Magnesium Zinc 26.26316A 26.26316M 26.26316 Aluminium Magnesium Zinc 26.26317A 26.26317M 26.26317 Fin FORMULA 60HP (or. ref. 17264) Plate VERADO - ALPHA (or. ref. 762144/5) 26.26318 Fin Aluminium Magnesium Zinc 26.26319A 26.26319M 26.26319 Collar BRAVO I-II-III (or. ref. 806190Q1) Plate 30/40HP (or. ref. 825271) Aluminium Magnesium Zinc 26.26320A 26.26320M 26.26320 26.26321Plate Plate 150/200HP (or. ref. 89949) Plate Mercruiser, VERADO and BRAVO (or. ref. 76214) 26.26322 Plate 26.26323 Plate Motorboat components and spare parts - Mercury mercruiser anodes 547

MERCURY MERCRUISER ANODES Collar BRAVO ONE e BRAVO III (or. ref. 806188A1) Fin F25-50 (or. ref. 822157) Aluminium Magnesium Zinc 26.26324A 26.26324M 26.26324 Aluminium Magnesium Zinc 26.26325A 26.26325M 26.26325 Small plate for outboard 4,5-9 HP (Or. Ref. 85824) Ring (or. ref. 823912-1) 26.26326 Small plate Aluminium Magnesium Zinc 26.26327A 26.26327M 26.26327 Fin 35 HP - V6 and MCM (or. ref. 822777Q1) Small bar (or. ref.826887m) 26.26328 Fin 26.26329 Small bar Plate Mercury - Mercruiser E.B (or. ref. 821631) Small bar for Verado 215-275 (2 per engine) Aluminium Magnesium Zinc 26.26330A 26.26330M 26.26330 Aluminium Magnesium Zinc 26.26331A 26.26331M 26.26331 Small plate for Verado 215-275 (4 per engine) Plate for ALPHA ONE -Bravo I-II-III (or. ref. 762144) Aluminium Magnesium Zinc 26.26332A 26.26332M 26.26332 Aluminium Magnesium Zinc 26.26333A 26.26333M 26.26333 548 Motorboat components and spare parts - Mercury - mercruiser anodes

MERCURY - MERCRUISER ANODES Ogive anode BRAVO 3 (or. ref. 865182A01) Bar anode Verado 350 Ci 4T (or. ref. 8M0012083) Aluminium Magnesium Zinc 26.26334A 26.26334M 26.26334 Aluminium Zinc 26.26335A 26.26335 Plate anode Verado 350 Ci 4T (or. ref. 847635001) Small plate 4 9,9 HP 4t (or. ref. 875208 ) Aluminium Zinc 26.26336A 26.26336 Aluminium Zinc 26.26337A 26.26337 Plate (Or. Ref. 8M0057772 ) Plate ZEUS DRIVE (or. ref. 87915QA65) Aluminium Magnesium Zinc 26.26338A 26.26338M 26.26338 Aluminio I mm. a mm. h mm. h1 mm. i mm. i1 mm. Ø mm. 26.26339A 160,9 150,9 16 5,5 73,5 114,5 8 Cube (or. ref. 804043) Fin (or. ref. 853762) 26.26751 Cube 26.26753 Fin Plate (or. ref. 8239121) Aluminium Magnesium Zinc 26.26756A 26.26756M 26.26756 Motorboat components and spare parts - Mercury - mercruiser anodes 549

YAMAHA - MARINER ANODES Small plate Mariner 9,9HP Small plate outboard 75 HP - XR6 26.26310 Small plate Aluminium Magnesium Zinc 26.26316A 26.26316M 26.26316 Plate zinc anode, 30/40HP Plate zinc anode, 150/200 HP 26.26321 Plate 26.26322 Plate Small bar zinc anode, 20-25 HP (or. ref. 6J8-11325-00) Short fin Yamaha 55HP, Mariner 40/60HP (or. ref. 679-45251-00) 26.26329 Small bar Aluminium Zinc 26.26400A 26.26400 Fin Yamaha 20-25-30HP, Mariner 10/50HP (or. ref. 664-45371-01) Small ring Yamaha-Mariner 2-25HP Aluminium Zinc 26.26401A 26.26401 Aluminium Magnesium Zinc 26.26402A 26.26402M 26.26402 Small plate zinc anode, Yamaha 9,9 HP (or. ref. 6E8-45251-00) Fin Yamaha 60/90 HP (or. ref. 688-45371-02) 26.26403 Small plate Aluminium Zinc 26.26404A 26.26404 550 Motorboat components and spare parts - Yamaha - mariner anodes

YAMAHA - MARINER ANODES Fin 115-225HP, V4-V6 (or. ref. 6E5-45371-01) Bar Yamaha 150/200 HP (or. ref. 6G5-45251-01-6G5-45251-02) Aluminium Zinc 26.26405A 26.26405 Aluminium Magnesio Zinco 26.26406A 26.26406M 26.26406 Small plate Yamaha 6/8HP (or. ref. 6G1-45251-02) Bar zinc anode, Yamaha 60-90HP TOP e SUPER TOP (or. ref. 6H1-45251-01) 26.26408 Small plate 26.26409 Bar Plate zinc anode, Yamaha 9,9-15HP (or. ref. 6E8-45251-02) Small plate Yamaha Malta 3,5 HP - engine 2B - 3A - 4A - 5C (or. ref. 6L5-45251-02-68D-G5251-00 - 810945M) 26.26410 Plate 26.26411 Small plate Small plate Yamaha 6/8 HP - engine 6C - 6D - 8C (or. ref. 6G1-45251-03-6NO-G5251-00) Bar anode, Yamaha Top 700 60/90 HP (or. ref. 6H1-45251-02) 26.26412 Small plate Aluminium Magnesium Zinc 26.26413A 26.26413M 26.26413 Plate Yamaha V8 (or. ref. 6T4-45836-00) Plate with holes Yamaha TD 26.26414 Plate 26.26415 Plate Motorboat components and spare parts - Yamaha - mariner anodes 551

YAMAHA - MARINER ANODES Plate Yamaha outdrives130/205/230/260 HP (or. ref. 6T545373-00-00) Fin Yamaha 130/205/230/260 HP (or. ref. 6T5-45371-00) 26.26416 Plate 26.26417 Fin Small plate Yamaha 40 HP 4T (or. ref. 6E0-45251-11-00 - 65W-45251-00) Fin Yamaha 25-30-70 HP Aluminium Zinc 26.26418A 26.26418 26.26419 Fin Cube Yamaha 115/225 HP (or. ref. 6E5-45251-00) Plate H.C. 48 (or. ref. 63D-45251-00 - 63D-45251-01) Aluminium Magnesium Zinc 26.26420A 26.26420M 26.26420 26.26421 Plate Cube trapezoidal with hole (or. ref. 67C-45251-00) Small plate Yamaha W30-W8 25/2/3, (rif. or. 689-11325-00), Mariner H25-H8 20/2/3 26.26422 Cube Aluminium Magnesium Zinc 26.26423A 26.26423M 26.26423 Fin Yamaha for 150-200 HP Plate with hole 9,9/15F -25 HP 4T (or. ref. 61N-45251-01) Aluminium Magnesium Zinc Rot. Ref. Original 26.26424A 26.26424M 26.26424 right 6J9-45371-01 26.26425A 26.26425M 26.26425 left 6K1-45371-02 26.26426 Plate 552 Motorboat components and spare parts - Yamaha - mariner anodes

YAMAHA - MARINER ANODES Fin with hole 9,9 HP 4T (or. ref. 66M-4537100) Plate in zinco con foro 9,9 HP (or. ref. 6G8-45251-00) 26.26427 Fin 26.26428 Plate Plate with hole (or. ref. 6T5-45251-00) Fin 80-100 Hp. 4T (or. ref. 67F-45371-00) 26.26429 Plate 26.26430 Fin Fin Yamaha 115-225 Hp. (V6) (or. ref. 61A-45371-00) Cylinder for engine 80-100 HP (or. ref. 67F-11325-00) Aluminium Zinc 26.26431A 26.26431 26.26432 Anode Plate leg F8C - 68T 2000 (or. ref. 68T-45251-00) Anode for engine100-225 HP (or. ref. 6E5-11325-00) Aluminium Zinc 26.26433A 26.26433 26.26434 Anode Anode for engine 40-200 HP (or. ref. 62Y-11325-00) Plate in board engine TD (or. ref. 6UO-42251-00) 26.26435 Anode 26.26436 Plate Motorboat components and spare parts - Yamaha - mariner anodes 553

YAMAHA - MARINER ANODES Plate in board engine (Or. Ref. 6U4-45373-00) Bar 2 holes for board engine (Or. Ref. 6U4-45251-00) 26.26437 Plate 26.26438 Bar Anode for engine 75-250 HP (Or. Ref. 68V-11325-02) Anode for engine 25-90 HP (Or. Ref. 688-11325-00) Aluminium Zinc 26.26439A 26.26439 Anode for engine 2,5-9 HP (Or. Ref. 6G8-11325-00) 26.26440 Anode Anode for engine 9,9 HP (Or. Ref. 66M-11325-00) 26.26441 Anode 26.26442 Anode Anode for engine with cap (Or. Ref. N51-11325-01) Small plate (Or. Ref. 6AH45251) 26.26443 Anode Aluminium Zinc 26.26444A 26.26444 Plate (Or. Ref. 6AW45373) Anode (Or. Ref. 68V-11325-01) 28,5 14M6 21,3 32,5 Aluminium Zinc 26.26445A 26.26445 Aluminium Zinc 26.26446A 26.26446 554 Motorboat components and spare parts - Yamaha - mariner anodes

YAMAHA - MARINER ANODES Long washer Zinc anode (Or. Ref. 6BL-11325-00) Small plate Zinc anode (Or. Ref. 682-11325-00) 26.26447 Long washer 26.26448 Small plate Long washer Zinc anode (Or. Ref. 68T-11325-00) Cube Zinc anode (Or. Ref. 63P-11325-11-00) 26.26449 Long washer 26.26450 Cube Cube Zinc anode (Or. Ref. 676-11325-00) Cube Zinc anode (Or. Ref. 63P-11325-01-00) 26.26451 Cube 26.26452 Cube Anode heat exchanger (Or. Ref. 61A-11325-00) Anode for engine 80-100 HP (Or. Ref. 67F-11325-01) 26.26453 Anode Bar Zinc anode (Or. Ref. 6AW-4525-1 ) 26.26454 Anode Plate Zinc anode (Or. Ref. 6AW 45619-00 ) Aluminium Magnesium Zinc 26.26455A 26.26455M 26.26455 Aluminium Magnesium Zinc 26.26456A 26.26456M 26.26456 Motorboat components and spare parts - Yamaha - mariner anodes 555

YAMAHA - MARINER ANODES Fin 150/225 HP 2/4T (Or. Ref. 6J9 45371-00 ) Directional fin (Or. Ref. 69L 45371-00 ) 26.26457 Fin Aluminium Magnesium Zinc 26.26458A 26.26458M 26.26458 Fin F25 - F40 - F50 - F60 4T (or. ref. 67C-45371-00) 26.26910 Fin VOLVO - PENTA ANODES Collar Zinc anode leg 50/100 (Or. Ref. 875810) Collar Zinc anode leg 50/250/270/275/285 (Or. Ref. 875805) 26.26500 Collar 26.26501 Collar Collar leg 280/290 SINGLE PROP (Or. Ref. 875815) Collar Zinc anode DUO PROP 290 H. 35 (Or. Ref. 852182) Collar DUO PROP 290 H. 30 since 2002 (Or. Ref. 875821) Aluminium Magnesium Zinc 26.26502A 26.26502M 26.26502 26.26503 Collar Aluminium Magnesium Zinc 26.26533A 26.26533M 26.26533 Small bar for manifold 200-250-270 (Or. Ref. 832989) Small bar for manifold MD70 - TDN70 - MD100 - TDM100 (Or. Ref. 823661) 26.26504 Small bar Aluminium Zinc 26.26505A 26.26505 556 Motorboat components and spare parts - Yamaha - mariner / volvo - penta anodes

VOLVO - PENTA ANODES Universal Bar leg 250-270-275-280-285. (Or. Ref. 832598) Universal Bar leg DUO PROP 290 (Or. Ref. 852835) Aluminium Magnesium Zinc 26.26506A 26.26506M 26.26506 Aluminium Magnesium Zinc 26.26507A 26.26507M 26.26507 Square Zinc anode for trim leg 270. (Or. Ref. 832934) Small plate 110/120 HP, S-B, S-C (Or. Ref. 852018) 26.26508 Square Aluminium Zinc 26.26510A 26.26510 Collar SEA DRIVE 120. (Or. Ref. 876286-851983) Collar short leg SEA DRIVE 110. (Or. Ref. 875812) Aluminium Magnesium Zinc 26.26512A 26.26512M 26.26512 Aluminium Magnesium Zinc 26.26513A 26.26513M 26.26513 Placca DUO PROP 290 (Or. Ref. 872793) Placca Zinc anode SEA DRIVE. (Or. Ref. 855105) Alluminio Magnesio Zinco 26.26515A 26.26515M 26.26515 26.26518 Placca Plate SX (Or. Ref. 3855411) Bar Zinc anode (Or. Ref. 3852970) Aluminium Magnesium Zinc 26.26520A 26.26520M 26.26520 26.26521 Bar Motorboat components and spare parts - Volvo - penta anodes 557

VOLVO - PENTA ANODES Plate Bow trust seal drive Ogive Bow trust 26.26522 Plate 26.26523 Ogive Collar for 3 blades propeller ABB (or. ref. 3858399) Plate Sea drive, sx drive (or. ref. 3854130) Aluminium Zinc 26.26524A 26.26524 Aluminium Magnesium Zinc 26.26225A 26.26225M 26.26225 Cube DPX (Or. Ref. 873395) Plate for DPX (Or. Ref. 876638) Bar DPX (Or. Ref. 872139) Aluminium Zinc 26.26529A 26.26529 26.26530 Plate Small bar for cooling (Or. Ref. 838929) Aluminium Magnesium Zinc 26.26531A 26.26531M 26.26531 Aluminium Zinc 26.26532A 26.26532 Plate SX DPH/DPR (Or. Ref. 3588746-3588748-3588750) Collar SAIL DRIVE 130/150 2002-2003 (Or. Ref. 3888305-3888306) Aluminium Magnesium Zinc 26.26534A 26.26534M 26.26534 Aluminium Magnesium Zinc 26.26535A 26.26535M 26.26535 558 Motorboat components and spare part - Volvo - penta anodes

VOLVO - PENTA ANODES Bar DUO PROP (Or. Ref. 3588745-3588770-3588768) Plate Stern drive platedph/dpr Aluminium Magnesium Zinc 26.26536A 26.26536M 26.26536 Aluminium Magnesium Zinc 26.26537A 26.26537M 26.26537 Plate Stern drive plate SX-A/DPS-A (Or. Ref. 3888814) Plate for engine series SX-A/APS-A (Or. Ref. 3888817) Aluminium Magnesium Zinc 26.26538A 26.26538M 26.26538 Aluminium Magnesium Zinc 26.26539A 26.26539M 26.26539 Anode for cooler (Or. Ref. 8520219) SEAL DRIVE 100 (Or. Ref. 852019) Cube IPS (Or. Ref. 3599981) 26.26540 Anode 26.26541 IPS Serie Ogive bow thrust - (Or. Ref. 41100098) Collar XDP-B (Or. Ref. 3861634) Cube XDP-B (Or. Ref. 3861636) 26.26542 Ogive 26.26544 Collar 26.26545 Cube Bar IPS aluminium (or. ref. 40005875 ) Plate sterndrive plate, zinc (Or. Ref. 41100276) 26.26546A Bar 26.26547 Plate Motorboat components and spare part - Volvo - penta anodes 559

BMW ANODES ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS Collar Zinc anode Mark 1 Fin Zinc anode Mark 1 26.26600 Collar 26.26601 Fin Fin Zinc anode Mark 2 Small bar Zinc anode for manifold 26.26602 Fin 26.26603 Small bar Plate Zinc anode Mark 1 Plate Zinc anode Mark 2 26.26604 Plate 26.26605 Plate ANODI YANMAR Small bar Zinc anode 8-12 HP (or. ref. 27210-200300) Small bar Zinc anode 8-10 HP (or. ref. 104211-41300) 26.26700 Small bar 26.26701 Small bar Ring Zinc anode 70-85 HP Ring Zinc anode Ø mm. 75 26.26702 Ring 26.26703 Ring 560 Motorboat components and spare part - BMW / Yanmar anodes

YANMAR ANODES Collar SD 20/30/40/50/60 (Or. Ref. 196420-02652) Small bar Zinc anode Small bar Zinc anode Magnesium Zinco 26.26704M 26.26704 26.26705 Small bar Small bar Zinc anode 8-12 HP (Or. Ref. 104211-41300-27210-200550) 26.26706 Small bar 26.26707 Small bar Small bar Zinc anode (Or. Ref. 27210-200200) Small bar Zinc anode 26.26708 Small bar 26.26710 Small bar Small bar Zinc anode Small bar Zinc anode 26.26711 Small bar 26.26712 Small bar Small bar Zinc anode Small bar Zinc anode, with cup (Or. Ref. 119574-44150) 26.26713 Small bar 26.26714 Small bar Motorboat components and spare part - Yanmar anodes 561

YANMAR ANODES ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS Small bar zinc (Or. Ref. 119574-44150) Small bar zinc (Or. Ref. 119574-18790) 26.26716 Small bar 26.26717 Small bar Small bar zinc Collar Two pieces collar serie SD 20-30-40-50-60 (Or. Ref. 196440-02660) 3/8 26.26718 Small bar Aluminium Magnesium Zinc 26.26719A 26.26719M 26.26719 Fin zinc Adaptor plate for two pieces collar series SD 20-30-40-50-60 (Or. Ref. 196440-02960) 26.26720 Fin 26.26721 Small plate ANODI TOHATSU Ring 2,5-3,5-5-6-8 HP (Or. Ref. 338-60218-2) Cube zinc, for MEGA (Or. Ref. 3B7-60218-1) Aluminium Zinc 26.26750A 26.26750 26.26751 Cube Fin zinc, MAXI Corsa 25-40 HP (Or. Ref. 348-60217-0) Fin zinc, MEGA 25/50 HP (Or. Ref. 3C8-60217-0) 26.26752 Fin 26.26753 Fin 562 Motorboat components and spare part - Yanmar / Tohatsu anodes

TOHATSU ANODES Fin Zinc anode, 60/70/90/120/140 HP (Or. Ref. 3B7-60217-0) Ring 15/18 HP - S MAXI - 25-40 HP CORSA (Or. Ref. 369-60218-1) 26.26754 Fin Aluminium Zinc 26.26755A 26.26755 Plate Zinc anode, 60/70/90/120/140/150HP (Or. Ref. 3C7-60218-2) Platre Zinc anode, 40/140 HP Aluminium Magnesium Zinc 26.26756A 26.26756M 26.26756 26.26757 Plate Fin 140 HP (Or. Ref. 3V1602170 ) Small plate, 4 9,9 HP 4t (Or. Ref. 3H6-60218-0 ) Aluminium Magnesium Zinc 26.26758A 26.26758M 26.26758 Aluminium Zinc 26.26337A 26.26337 ANODI SUZUKI Fin Zinc anode, 20-25 - 30 HP (Or. Ref. 55125-96310) Fin 75-85 HP (Or. Ref. 55125-95500) 26.26800 Fin Aluminium Magnesium Zinc 26.26801A 26.26801M 26.26801 Motorboat components and spare part - Tohatsu / Suzuki anodes 563

SUZUKI ANODES ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS Small plate Zinc anode, 5 HP 4T (Or. Ref. 55300-98.600) Cube 115 HP (Or. Ref. 41810-87D00) 26.26802 Small plate Aluminium Magnesium Zinc 26.26803A 26.26803M 26.26803 Ring Zinc anode, (Or. Ref. 11130-94600) Small plate, 65/115 HP (Or. Ref. 55320-95310 -55320-95311 ) 26.26804 Ring Aluminium Magnesium Zinc 26.26805A 26.26805M 26.26805 Anode zinc, 2-4-6-8HP (Or. Ref. 55320-95500) Fin Zinc anode, 55-65 HP (Or. Ref. 55125-95301) 50 61 26.26806 Anode Small plate Zinc anode, 9,9-15 HP (Or. Ref. 55321-93900) 26.26807 Fin Fin Zinc anode, 115 HP (Or. Ref. 55125-94502) 26.26808 Small plate 26.26809 Fin Small plate Zinc anode, 2 HP (Or. Ref. 55320-98400) 9,9-15 HP 4T (rif. or. 41811-98500) Fin Zinc anode, 50-70 HP DT 150 DT 175 DT 200 DT 225 4T (Or. Ref. 55125-87800, 55120-8701) 26.26810 Small plate 26.26811 Fin 564 Motorboat components and spare part - Suzuki Anodes

SUZUKI ANODES Small plate Zinc anode, 90-115 HP. DF 115-140 (Or. Ref. 55321-90J01) Fin serie DF 60-70 (Or. Ref. 55125-90J01) Aluminium Magnesium Zinc 26.26812A 26.26812M 26.26812 Aluminium Magnesium Zinc 26.26813A 26.26813M 26.26813 Plate 4T. 70-90-115-140 (Or. Ref. 5532194900) Aluminium Magnesium Zinc 26.26756A 26.26756M 26.26756 ANODI SELVA Trapezoid small plate Zinc anode, 40 HP 4T Cylinder Zinc anode 26.26422 Plate 26.26432 Anode Straight plate Zinc anode, (Or. Ref. 9005655) Curved plate zinc, (Or. Ref. 9005660) 26.26900 Plate 26.26901 Plate Fin Zinc anode, 6-8-9,9-15 HP (Or. Ref.. 2500010) Fin Zinc anode, BEST 800 - S 1000 (Or. Ref. 2500050) 26.26902 Fin 26.26903 Fin Motorboat components and spare part - Selva / Selva anodes 565

SELVA ANODES ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS Ring Zinc anode, 6 HP (Or. Ref. 2504030 ) Bar Zinc anode, 25 HP BEST e MASTER 26.26904 Ring 26.26905 Bar Fin Zinc anode,25/40 HP (Or. Ref. 2500065 ) Plate Zinc anode, S405/700 (Or. Ref. 2504020 ) 26.26906 Fin 26.26907 Plate Bar Zinc anode, S600 (Or. Ref. 2504015- ) Small plate Zinc anode, 25 Hp 4T 26.26908 Bar 26.26418 Small plate Plate Zinc anode, 100 HP (or. ref. 2504025 ) Fin Zinc anode, Manta / Barracuda 26.26909 Plate 26.26910 Fin Plate zinc, ZMIR 8 Hp - NAXOS 15 Hp ( rif. or. 2504035 ) Cube zinc, trapezoid small plate 26.26911 Plate 26.26422 Cube 566 Motorboat components and spare part - Selva anodes

HONDA ANODES Plate 8/20 HP (Or. Ref. 01402CORR366JR3) Small Plate 75-130 HP (or. ref. 41109-ZW1-003) Aluminium Magnesium Zinc 26.26200A 26.26200M 26.26200 Aluminium Magnesium Zinc 26.26316A 26.26316M 26.26316 Short fin (Or. Ref. 41107-ZN1-003-2A) Fin Aluminium Zinc 26.26400A 26.26400 Aluminium Zinc 26.26401A 26.26401 Ring 8/20 HP (Or. Ref. 41106-ZW-000) Small plate 10-50 HP (or. ref. 41106-ZV4-650 / 41106-935-812) Aluminium Magnesium Zinc 26.26950A 26.26950M 26.26950 Aluminium Magnesium Zinc 26.26951A 26.26951M 26.26951 Fin 25-40-50 HP (or. ref. 41107-ZV5-000) Plate 40-50 HP (or. ref. 06411-ZW5-000) Aluminium Magnesium Zinc 26.26952A 26.26952M 26.26952 Aluminium Magnesium Zinc 26.26953A 26.26953M 26.26953 Plate 75/130/225 HP (rif. or. 06411-ZW1-000) Small plate 75/130/225 HP (rif. or. 41109-ZW1-B00) Aluminium Magnesium Zinc 26.26954A 26.26954M 26.26954 Aluminium Magnesium Zinc 26.26956A 26.26956M 26.26956 Motorboat components and spare part - Honda anodes 567

HONDA ANODES ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS Ring anode 8-225 HP (Or. Ref. 12155-ZV4-A00) Small plate Zinc anode, 8-10-15 HP (Or. Ref. 41106-ZW9-000) Aluminium Zinc 26.26957A 26.26957 26.26958 Small plate Ring Zinc anode, (Or. Ref. 12155-ZW5-000) Fin 75 90 115 130 HP (Or. Ref. 41107 ZW1 BO1ZA ) Aluminium Zinc 26.26959A 26.26959 Aluminium Magnesioum Zinc 26.26960A 26.26960M 26.26960 ANODI LOMBARDINI Collar Zinc anode, Sail Drive Sldm (Or. Ref. 1301339 ) Collar Zinc anode, Sail Drive Sldm (Or. Ref. 1301350 ) 26.26678 Collar 26.26679 Collar Collar Zinc anode, Sail Drive 2 sezioni (Or. Ref. 9135034) Collar Zinc anode, Sail Drive 2 sezioni (Or. Ref. 9135033) Magnesium Zinc 26.26680M 26.26680 Magnesium Zinc 26.26681M 26.26681 568 Motorboat components and spare part - Honda / Lombardini anodes

BUSHING, ANTIVIBRATION ELASTIC SUPPORT Article Ø A mm. Ø B mm. C mm. 27.27725 25 38,10 100,00 27.27730 30 44,45 127,00 27.27735 35 47,62 139,70 27.27740 40 53,97 165,10 27.27745 45 60,32 177,80 27.27750 50 66,67 203,20 27.27755 55 76,20 228,60 27.27760 60 82,55 241,30 27.27765 65 85,72 266,70 27.27770 70 95,25 279,40 27.27775 75 101,60 304,80 27.27780 80 101,60 304,80 27.27790 90 114,30 355,60 Article A B C inch. mm. inch. mm. inch. mm. 27.27525 1 25,40 1 1/2 38,10 4 100,00 27.27528 1 1/8 28,57 1 5/8 41,27 4 1/2 114,30 27.27531 1 1/4 31,75 1 3/4 44,45 5 127,00 27.27535 1 3/8 34,92 1 7/8 47,62 5 1/2 139,70 27.27538 1 1/2 38,10 2 50,80 6 152,40 27.27541 1 5/8 41,27 2 1/8 53,97 6 1/2 165,10 27.27544 1 3/4 44,45 2 3/8 60,32 7 177,80 27.27547 1 7/8 47,62 2 5/8 66,67 7 1/2 190,50 27.27548 2 50,80 2 5/8 66,67 8 203,20 27.27549 2 1/2 63,50 3 1/4 82,55 10 254,00 Bushing Bronze and rubber, hydro lubricating rubber for decimal axles Article Ø Amm. Ø Bmm. C mm. 27.27700 22 29 75 27.27701 22 36 80 27.27702 25 36 100 27.27703 25 40 120 27.27704 30 40 120 27.27705 35 54 140 27.27706 40 54 140 Bushing Rubber bushings for sailing boats Article Sez. mm. Ø shaft mm. 27.27806 6 x 6 20 / 25 27.27808 8 x 8 25 / 35 27.27810 10 x 10 40 / 60 Gland packing Greased square braided hemp for propeller shaft assembly sealing. Package 2 m. Bushing Article Ø shaft P mm. mm. bronze resin 27.28025 25 39 27.28125 25 42 27.28030 30 45 27.28130 30 48 27.28035 35 48 27.28135 35 54 27.28040 40 54 27.28140 40 60 L mm. 111 116 123 129 O mm. 38 Axial seals rmta The shaft seal is a special and innovative project, which will replace the traditional packing. The particular type of flame retardant rubber used for the construction of the base elastomeric seals CR with special characteristics, can withstand contact with oil or grease, ensures low friction values and is suitable for operating temperatures from -10 to +80. The estate RMTA is small, easy to assemble, comes with stainless steel cable ties, and a packet of silicone grease special seawater resistant which reduces friction and keeps the low temperatures produced by the rotation axis and a special protection to be included in the estate to facilitate the assembly of the axle. Motorboat components and spare part - Bushing 569

BUSHING, ANTIVIBRATION ELASTIC SUPPORT Antivibration elastic support for engine made by vulcanizing the rubber to metal to achieve the best results. The rubber used is a compound based on NBR that ensures the best elastic properties. Hardness Shore 55%. Article L mm. H mm. CF mm. D mm. F mm. BR mm. B mm. Load kg. 27.27850 100 105 85 M14 8,5 62 30 200 27.27851 128 125 110 M16 10,5 175 50 350 27.27852 190 170 160 M18 16,5 53 600 Elastic support stainless steel without pin Article Ø A mm. Ø E mm. H mm. K mm. L mm. G mm. Load kg. 27.27855 62 25 30 85 100 10 MA 200 27.27856 92 44 42 110 130 16 MA 350 27.27857 115 61 48 160 160 18 MA 600 Elastic support galvanized steel with pin Articole L mm. H mm. CF mm. D mm. F mm. BR mm. B mm. Load kg. 27.27865 120 100 100 M12 14x11 80 41 85 27.27866 183 130 140 M16 30x13 52 52 190 27.27867 230 200 182 M16 34x18 180 74 500 570 Motorboat components and spare part - Antivibration elastic support

IMPELLERS Ancor Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.27162 Pompa PM16 12,10 56,00 29,40 12 Bukh Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.27107 610G0102 1 gasket 1 screw 9,54 39,60 18,94 6 Caterpillar Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.27103 1L4774 2 gasket 25,00 95,00 63,10 9 27.27104 3N1906 1 gasket 1 o-ring 16,00 65,00 50,20 8 27.27111 4L8470 25,00 95,00 88,50 12 27.26135 5N9360 1 o-ring 25,00 95,00 63,10 12 27.26164 1W5664 20,00 84,00 73,50 12 27.26182 1095327-1230492 - 1095324-1239785 1 screw 2 o-ring 20,70 94,50 101,50 12 27.27168 17018-0001B - 16,00 65,00 76,20 8 Motorboat components and spare part - Impellers 571

IMPELLERS ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS Cummins Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.27104 650607 1 gasket 1 o-ring 16,00 65,00 50,20 8 27.27103 10556540 2 gasket 25,00 95,00 63,10 9 27.26164 3802444-3897337 3916852-3925236 - 20,00 84,00 73,50 12 27.26181 3974456 1 o-ring 16,10 84,00 73,00 12 27.26182 4019403 1 screw 2 o-ring 20,70 94,50 101,50 12 27.26190 132-0415 1 o-ring 12,20 19,00 40,00 6 Detroit Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.27103 5193553 2 gasket 25,00 95,00 63,10 9 27.27104 5193602 1 o-ring 1 gasket 16,00 65,00 50,20 8 27.27111 5196168-25,00 95,00 88,50 12 27.26135 8924838 1 o-ring 25,00 95,00 63,10 12 Hunday Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.26886 JP7556 S250S 10212 2 gasket 20,00 80,00 75 9 572 Motorboat components and spare part - Impellers

IMPELLERS Jabsco Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.27101 653-0001-0003 2 gasket 1 o-ring 1 screw 12,15 50,80 22,10 6 27.27102 4598-0001-0003-15,926 65,00 50,20 8 27.27103 836-0001-0003 2 gasket 25,00 95,00 63,10 9 27.27104 920-0001-0003 1 gasket 1 o-ring 16,00 65,00 50,20 8 27.27105 1210-0001 / 3085-0001 4 gasket 1 o-ring 16,00 57,00 31,60 12 27.27106 4568-0001-0003 1 gasket 1 key 16,00 57,00 31,65 12 27.27107 4528-0001-0003 1 gasket 1 screw 9,54 39,60 18,94 6 27.27108 6760-001 25,00 95,00 88,50 9 27.27109 673-0001-0003 2 gasket 1 screw 12,66 50,80 22,10 6 27.27111 17936-001/21676-001 25,00 95,00 88,50 12 27.27120 22405-0001 1 gasket 1 screw 12,00 39,60 19,20 6 27.27124 13554-0001 16,00 57,00 48,20 12 27.27140 22779-0001 12,75 50,80 22,10 6 27.27141 1411-0001 / 21411-0001 8,05 31,30 11,90 6 27.27150 18948-0001 15,90 65,20 41,10 12 Motorboat components and spare part - Impellers 573

IMPELLERS ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS Jabsco Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.27151 18838-0001 15,90 62,00 31,70 12 27.27152 18777-0001 / 22120-0001 1 o-ring 14,50 57,00 50,20 12 27.27153 17937-0001-0003 1 o-ring 16,00 65,00 50,10 10 27.27168 17018-0001B 16,00 65,00 76,20 8 27.26104 22120-0001 14,50 57,00 50,20 12 27.26110 7273-0001 8,07 50,80 22,10 6 27.26138 6303-0001 8,07 51,30 22,00 6 27.26135 17935-0001 1 o-ring 25,00 95,00 63,10 12 27.26130 14609/14787/1414-0001 8,05 31,75 12,00 6 27.26144 17240-0001 / 18789-0001 25,40 118,00 88,90 9 27.26148 17954-0001 16,85 65,00 50,70 10 27.26152 17370-0001 20,20 95,00 88,50 12 27.26153 18786-0001 25,40 118,00 88,90 9 574 Motorboat components and spare part - Impellers

IMPELLERS Jabsco Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.26155 11979-0001 16,00 65,00 36,50 8 27.26258 17255-0003 39,10 18,90 6 27.26150 13554-6001 16,00 57,15 48,25 12 27.26156 18673-0001 1 o-ring 1 gasket 1 screw 12,66 51,80 22,00 10 27.26157 50461-1001 13,42 57,18 50,25 10 27.26163 17938-0001 1 o-ring 25,40 95,00 95,00 12 27.26164 18958-0001 20,00 84,00 73,50 12 27.26172 17370-0001 38,82 119,7 133 9 27.26208 4568-0003 1 gasket 1 key 16,00 57,00 31,65 12 27.26146 18653-0001 1 screw 12,15 50,80 22,10 10 27.26187 17018-0001B 1 o-ring 14,28 65,20 75,65 9 Johnson Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.27101 09-810B 1 o-ring 2 gasket 1 screw 12,15 50,80 22,10 6 27.27103 09-1029B 2 gasket 25,00 95,00 63,10 9 27.27104 09-1028B 1 o-ring 1 gasket 16,00 65,00 50,20 8 27.27105 09-1027B 4 gasket 1 o-ring 16,00 57,00 31,60 12 27.27106 09-801B 1 gasket 1 screw 16,00 57,00 31,65 12 Motorboat components and spare part - Impellers 575

IMPELLERS ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS Johnson Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.27107 09-806B 1 gasket 1 screw 9,54 39,60 18,94 6 27.27108 09-802B 25,00 95,00 88,50 9 27.27109 09-1026B 2 gasket 1 screw 12,66 50,80 22,10 6 27.27111 09-814B 25,00 95,00 88,50 12 27.27120 09-808B 1 gasket 1 screw 12,00 39,60 19,20 6 27.27124 09-812B 16,00 57,00 48,20 12 27.26132 09-1052B 8,00 44,60 13,00 6 27.26135 09-819B 1 o-ring 25,00 95,00 63,10 12 27.26138 09-824P 8,07 51,30 22,00 6 27.26162 09-821B 1 gasket 25,00 65,70 80,00 12 27.26186 09-0820B 22,50 96,50 130,00 12 27.26232 09-1052S-9 8,00 44,60 13,00 6 27.26284 09-1077B-9 740 35,40 12,80 6 576 Motorboat components and spare part - Impellers

IMPELLERS Kohler Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.26190 359978 1 o-ring 12,20 19,00 40,00 6 Oberdorfer Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.27102 6603 15,926 65,00 50,20 8 27.27103 C7054 2 gasket 25,00 95,00 63,10 9 27.27106 B6620 1 gasket 1 key 16,00 57,00 31,65 12 27.26135 7054 1 o-ring 25,00 95,00 63,10 12 27.27150 8922 15,90 65,20 41,10 12 27.26138 6617 8,07 51,30 22,00 6 Onan Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.27105 132-0162 4 gasket 1 o-ring 16,00 57,00 31,60 12 27.27107 132-0859 1 gasket 1 screw 9,54 39,60 18,94 6 27.27150 132-0117 15,90 65,20 41,10 12 27.27151 132-0317 15,90 62,00 31,70 12 Motorboat components and spare part - Impellers 577

IMPELLERS ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS Perkins Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.27103 0460027 2 gasket 25,00 95,00 63,10 9 27.27104 24880031 1 o-ring 1 gasket 16,00 65,00 50,20 8 27.27105 0460038 / 24880190 4 gasket 1 o-ring 16,00 57,00 31,60 12 27.27107 24880272 1 gasket 1 screw 9,54 39,60 18,94 6 27.27111 0460027 25,00 95,00 88,50 12 27.27150 NA900012 15,90 65,20 41,10 12 27.27151 NA900010 / 24880178 15,90 62,00 31,70 12 27.27153 0460024 / 24880031 1 o-ring 16,00 65,00 50,10 10 27.26156 24880194 1 o-ring 1 gasket 1 screw 12,66 51,80 22,00 10 Renault Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.27103 RC210D 2 gasket 25,00 95,00 63,10 9 27.27104 RC320D 1 o-ring 1 gasket 16,00 65,00 50,20 8 27.27107 RC160D 1 gasket 1 screw 9,54 39,60 18,94 6 27.27130 Couach 48300055 / 48300037 10,00 50,80 22,10 6 27.27131 Couach 48300006 / 48300007 17,00 66,00 32,00 8 27.26122 Couach 48300008 17,00 65,00 48,60 8 578 Motorboat components and spare part - Impellers

IMPELLERS Sherwood Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.27107 9979 1 gasket 1 screw 9,54 39,60 18,94 6 27.27150 10615K 15,90 65,20 41,10 12 27.27151 9959K 15,90 62,00 31,70 12 27.26164 17000K 1 o-ring 20,00 84,00 73,50 12 27.26165 9000K 1 gasket 2 o-ring 15,95 62,50 22,00 12 27.26166 10077K 3 gasket 1 o-ring 12,80 57,00 20,00 12 27.26167 15000K 2 gasket 1 o-ring 16,00 65,00 51,00 12 27.26179 22000K 1 screw 1 o-ring 20,70 114,30 109,50 10 27.26181 27000K 1 o-ring 16,10 84,00 73,00 12 27.26182 18000K 1 screw 2 o-ring 20,70 94,50 101,50 12 27.26183 26000K 1 o-ring 20,00 94,50 79,80 12 27.26190 8000K 1 o-ring 12,20 19,00 40,00 6 27.26192 29000K 23,80 95,00 102,00 12 Motorboat components and spare part - Impellers 579

IMPELLERS ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS Solè Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.27104 347.11.008 1 o-ring 1 gasket 16,00 65,00 50,20 8 27.27105 351.11.008 4 gasket 1 o-ring 16,00 57,00 31,60 12 27.27135 312.11.008 1 screw 12,00 52,00 25,00 6 27.27136 321.11.008 1 screw 10,00 39,60 19,00 6 Universali per Pompe di sentina Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.27160 Jabsco, Johnson, Ancor, TMC, ecc 8,10 51,00 22,20 6 27.27161 Jabsco originale (nitrilica resistente agli oli) 8,10 51,00 22,20 6 Vetus Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.27103 IMP00901 2 gasket 25,00 95,00 63,10 9 27.27104 DT64 - DTA64 - DT67 - DTA67 C4/6 - P4.25 - IMP00301 1 o-ring 1 gasket 16,00 65,00 50,20 8 27.27105 STM6514-36-22-11 - 42-36 serie - 52-34serie - DT43 - DTA43 - M4.14 - IMP00201 1 o-ring 4 gasket 16,00 57,00 31,60 12 27.27107 IMP00501 1 gasket 1 screw 9,54 39,60 18,94 6 27.27109 IMP00101 2 gasket 1 screw 12,66 50,80 22,10 6 27.27111 IMP00801 25,00 95,00 88,50 12 27.27120 IMP00601 1 gasket 1 screw 12,00 39,60 19,20 6 27.26146 K3/3D/4 - L2/L3 - M2.05 - M3.10 - IMP701 1 screw 12,15 50,80 22,10 10 27.26232 09-1052S-9 8,00 44,60 13,00 6 580 Motorboat components and spare part - Impellers

IMPELLERS Volvo Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.27102 818680 15,926 65,00 50,20 8 27.27103 875736-1 / 807904 / 875660-3 21430184 / 21730344 2 gasket 25,00 95,00 63,10 9 27.27104 875593-6 / 877061 / 3841697 1 o-ring 1 gasket 16,00 65,00 50,20 8 27.27105 3862567/3862281/875811-2 877400/21213660 1 o-ring 4 gasket 16,00 57,00 31,60 12 27.27106 875575 1 gasket 1 key 16,00 57,00 31,65 12 27.27107 875807-0/803729/3586494 1 gasket 1 screw 9,54 39,60 18,94 6 27.27109 875808-8 / 3593659 2 gasket 1 screw 12,66 50,80 22,10 6 27.27111 875697 / 875814 25,00 95,00 88,50 12 27.27120 875583-7 / 3586496 1 gasket 1 screw 12,00 39,60 19,20 6 27.27150 835874 15,90 65,20 41,10 12 27.27151 835512-5 / 3854286 15,90 62,00 31,70 12 27.27152 834794 / 876120 1 o-ring 14,50 57,00 50,20 12 27.27153 3588475 1 o-ring 16,00 65,00 50,10 10 27.27167 3555413-8 10,00 39,60 14,30 12 27.27168 3583602 / 3593573 3588474 / 3819486 16,00 65,00 76,20 8 Motorboat components and spare part - Impellers 581

IMPELLERS ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS Volvo Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.26135 877066 1 o-ring 25,00 95,00 63,10 12 27.26162 876771 1 gasket 25,00 65,70 80,00 12 27.26163 3830459 1 o-ring 25,40 95,00 95,00 12 27.26178 3842786 2 o-ring 14,50 57,00 48,30 12 27.26189 21213660 / 3862567 1 o-ring 14,50 57,00 32,50 12 Westerbeke Articolo Original Reference Foto Include Inserto A mm. B mm. C mm. N pale 27.27120 32620-33032 1 gasket 1 screw 12,00 39,60 19,20 6 27.27150 33779 15,90 65,20 41,10 12 27.27151 33104 / 11907 15,90 62,00 31,70 12 27.26166 33112 / 11764 12,80 57,00 20,00 12 582 Motorboat components and spare part - Impellers

IMPELLERS Yanmar Article Original Reference Photo Includes Insert A mm. B mm. C mm. Blades 27.27104 127610-42200 1 o-ring 1 gasket 16,00 65,00 50,20 8 27.27105 129470-42530 / 129470-42531 / 129470-42532 1 o-ring 4 gasket 16,00 57,00 31,60 12 27.27106 145410-46090 / 124310-46090 1 gasket 1 key 16,00 57,00 31,65 12 27.27107 104211-42070 1 gasket 1 screw 9,54 39,60 18,94 6 27.27124 119773-42600-01 16,00 57,00 48,20 12 27.27140 104223-42091 / 124223-42092 12,75 50,80 22,10 6 27.27141 128176-42071 8,05 31,30 11,90 6 27.27153 127610-42200 1 o-ring 16,00 65,00 50,10 10 27.26130 128170-42070 8,05 31,75 12,00 6 27.26161 119593-42200 16,00 65,00 68,20 10 27.26162 119574-42550 1 gasket 25,00 65,70 80,00 12 Extractors for Jabsco impellers in Neoprene for easy removal and replacement of all pumps. Built with corrosion-resistant aluminum and stainless steel material. Extractors for Sherwoord impellers art. 27.26179-181-182-183 27.27200 impellers up to Ø mm. 65 27.27201 impellers up to Ø mm. 118 27.26134 Extractors Motorboat components and spare part - Impellers 583

IMPELLERS ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS ARONA Original Reference Article AD182/185/190/195/290 27.27120 AL186 27.27107 AD295/395/495 27.27109 AD395/495/4100 (PM3270.1951) 27.27105 TA130/200 27.27103 BMW Original Reference Article 410/411 27.27105 4 CYL E 27.27105 6 CYL E-D 27.27104 B190/220 7.27104 D7/12 27.27120 D35/50 27.27101 D150/190/530/636 27.27104 BRITISH POLAR ENG Original Reference Article Barracuda I 27.27102 Barracuda II, Norseman, Penguin, Pike II, Sea Consul, Sea Zephyr, Vulture. 27.27105 Pike I 27.27106 Sea Urchin 27.27107 Vandall 27.27104 BUKH Original Reference Article DV10/20 27.27109 DV10/20, DV10ME/20ME 27.27120 DV10ME/20ME (610G0102) 27.27107 DV36/36ME 27.27105 4K/6K 27.27104 CHRIS-CRAFT Original Reference Article 307-32070-327F-427-454 27.27150 350-A-M-W 27.27166 CHRYSLER Original Reference Article M80-SLANT6 27.27151 M225X/273X 27.27151 M383X/413E/440X alcuni 27.27151 M383X/413E/440X/ LM318X/340X 27.27150 CLAE Original Reference Article BD55/85 27.27105 C53 27.27109 FD36 27.27102 FD36 (PM4009.200) 27.27106 CUMMINS Original Reference Article B ALL/TUTTI 27.27104 NH220M/250M- NI335M/380M-NT855M (10556540) 27.27103 V504M (650607) 27.27104 V555M/VT555M (10556540) 27.27103 DAF Original Reference Article 1160MY 27.27103 DA475M - DD/DS575M 27.27104 alcuni DA475M - DD/DS575M 27.27105 alcuni DD/DF575/615MY 27.27104 DOLPHIN MARINE Original Reference Article ADHARA 27.27104 ALTAIR II - HADAR II 27.27105 HYDRA 27.27109 MERAK II 27.27105 NIMBUS - SATURN 27.27109 SAIPH II 27.27105 SUPER SAIPH II - VEGA II 27.27104 DTN Original Reference Article DTR62/70 27.27109 X4M88A/90A 27.27105 X4M88A/90A 27.27109 X6M88A/90A 27.27104 X6M88A/90A 27.27105 X6M88A/90A (PM9007-04) 27.27104 FARYMANN Original Reference Article A30H/M - A40H/M 27.27107 CS-P-R-S-30H/M 27.27109 DS/ES/GS-K30M-K34L30 27.27107 FORD Original Reference Article 270ET 27.27104 589E (6 CYL. B) 27.27102 590E (6 CYL. D) 27.27102 591E (4 CYL. B-D) 27.27106 597E (3 CYL. D) 27.27109 2400/2700 7.27105 2701E (4 CYL.) 27.27105 2704E (6 CYL.) 27.27105 2711E (4 CYL.) 27.27105 2713E (6 CYL.) 27.27105 2714E (6 CYL.) 27.27104 2715E (6 CYL.) 27.27105 BSD 27.27104 FSD 27.27105 XLD 27.27109 GEC DIESEL Original Reference Article P ALL/TUTTI 27.27109 R4 ALL/TUTTI 27.27104 R6 (PM10770.57) 27.27103 R6 (PM11120.200) 27.27104 T ALL/TUTTI 27.27111 TSC8 27.27103 GENERAL MOTORS Original Reference Article P ALL/TUTTI 27.27109 220/330M 27.27105 330M TURBO 27.27104 381/466/500M 27.27104 GRAY MARINE Original Reference Article 4 CYL. 27.27166 COMPACT V8 27.27166 G76647/80971 27.27166 G77475/77560 27.27166 G77585-6/80784-5 27.27166 G85106 27.27150 HANOMAG Original Reference Article D14R19W 27.27105 D21R327W 27.27105 D28LAW 27.27105 D28R35W 27.27105 D57W58-D93W100- D611W11-D621W22-27.27104 D633W33 ISOTTA FRASCHINI Original Reference Article D30.55.6L 27.27105 H/L/V ALL/TUTTI - ID36/38 27.27111 ID32 27.27103 584 Motorboat components and spare part - Impellers

IMPELLERS CATERPILLAR Original Reference Article 1L 4774 27.27103 3N 1906 27.27104 4L 8470 27.27111 5N 9360 27.26135 IVECO AIFO Original Reference Article 503/504/505/513 520S/521/521S (8108228) 27.27104 514 27.27107 600 27.27107 8031M55/8041M05 (4913429) 27.27105 8041M/8060MSD (8108228) 27.27104 804/8041M/8141SM (8108228) 27.27104 806M (4913429) 27.27105 8060SRM (4913429) 27.27105 8061M/M05/M55 (4913429) 27.27105 8061SM/SM01/SM05 (8108228) 27.27104 8061SRM05/06/10 (8108228) 27.27104 8141M/SM00 (4913429) 27.27105 8210/8220M (8108228) 27.27104 828MTEA 27.26135 8281SRM07/44 27.27111 836MTCA (8108228) 27.27104 8361M (4913429) 27.27105 8361SM/SRM (8108228) 27.27104 CO-1DM/CO-2DM (8108228) 27.27104 CO-3M (4913429) 27.27105 CP-3M/-3MCP (8108228) 27.27104 UNO M20/40 27.27109 UNO M40 (PM29500.1351) 27.27105 V8TC/V12SS 27.27103 (4913855) 27.27165 LOMBARDINI Original Reference Article 632/672/673/674 832/833/834 27.27107 M.A.N. Original Reference Article W4>8V ALL/TUTTI 27.27103 MERCEDES Original Reference Article OM314/352/355 360/401/402/636 27.27105 OM403/404 27.27103 MERCRUISER Original Reference Article ALL/TUTTI (47-89984) 27.27005 D219 27.27104 BRAVO I/II 27.27011 NANNI Original Reference Article 2.40/2.60/3.90 27.27107 2.40/2.60/3.90H/HE 27.27101 3.110/4.110 27.27101 4.150/4.180/4.190HE 27.27105 4.240/5.300/6.570 27.27104 8V 27.27103 RC210D 27.27103 RC320D 27.27104 O.M.C Original Reference Article STERNDRIVE (NO COBRA) (379475) 27.27037 V8 CHEVY 27.27150 ONAN Original Reference Article 4 CYL. DIESEL (132-0117) 27.27151 5 CYL. DIESEL 27.27150 12 MDJC/15MDJF (132-0117) 27.27151 30 MDEH/50MDEG (132-0117) 27.27151 (132-1620) 27.27105 (132-1359) 27.27107 PEGASO Original Reference Article 9028/9040/9100 9105/9130 27.27104 9140/9716 27.27105 PERKINS Original Reference Article 1.25M-H.36M 27.27107 V2.95M 27.27107 4.107/4.108M/LL (0460038) 27.27105 4.236/4.236LL (0460038) 27.27105 4.270M (24880031) 27.27104 4.99M (0460038) 27.27105 4.99M (24880272) 27.27107 6.305M (24880031) 27.27104 6.354LL/OM/3M (24880031) 27.27104 6.354M (0460038) 27.27105 L4M (24880031) 27.27104 P3-144/152M (24880031) 27.27104 PERAMA ALL/TUTTI (24880194) 27.27109 PERAMA M20 27.27107 PRIMA ALL/TUTTI (0460038) 27.27105 S6M (24880031) 27.27104 V8.810/TV8.510/TV8.540 (0460027) 27.27103 4-107/4-154 27.27166 6-354 (NA900012) 27.27150 (NA900010) 27.27151 RENAULT MARINE Original Reference Article COUACH 27.27131 COUACH 27.27130 RC16D 27.27107 RC210D 27.27103 RC320D 27.27104 RUGGERINI Original Reference Article PM105/2 27.27105 RD25 27.27107 RD/CRD100/951 27.27107 RDM901/RM80 27.27107 SAAB SCANIA Original Reference Article D/DS5/DSI11 27.27103 D/DS5 (PM9700-21) 27.27104 SOLÈ DIESEL Original Reference Article 4.108 27.27105 6.354.3 27.27104 MB616-4/6 27.27104 MB636 27.27105 SF15/18 27.27104 SM615/636 27.27105 STATUS MARINE Original Reference Article 4.108 27.27105 36/42/52 ALL/TUTTI 27.27105 C/CT4/6 27.27104 M2.05/3.10 27.27101 M4.14 27.27105 P4.25 27.27104 Motorboat components and spare part - Impellers 585

IMPELLERS ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS TECNOMOTORI Original Reference Article WS81/140/185/285 27.27107 WS380 27.27109 WS1204 27.27102 WS1208 27.27103 VM Original Reference Article 102-102/103MH11 27.27109 103/104 27.27105 104/106MH11 27.27105 106-106M11 27.27109 114/116MH 27.27104 116DAN-M 27.27105 413/613M 27.27105 956/956M11 27.27109 1306MH14 27.27109 1308MH14 27.27104 1310/1312MH14 27.27111 HR480/692 27.27104 VOLVO PENTA Original Reference Article 115B (875808-8) 27.27109 271/311 (V8) (875811-2) 27.27105 1113BR (875593-6) 27.27104 AQ60F/80/90/95/100 (875808-8) 27.27109 AQ105/110/115/130/140 (875808-8) 27.27109 AQ120B/125A/131A (875575-3) 27.27106 AQ140A/145A/151A (875575-3) 27.27106 AQ150A-B/180 (875811-2) 27.27105 AQ150/200 (PM14320/620) 27.27102 AQ165A/170A-B-C/171 (875575-3) 27.27106 AQ175A (875811-2) 27.27165 AQ190 (835874-9) 27.27150 AQ200-290 ALL/TUTTI (PM22740.0151) 27.27165 AQ200/225A-B-C (835512-5) 27.27166 AQ240 (835874-9) 27.27150 AQ255A (835512-5) 27.27166 AQ740 27.27165 AQAD30A (875593-6) 27.27104 AQAD40A-B (875660-3) 27.27103 AQD2B (875807-0) 27.27107 AQD11C (875583-7) 27.27120 AQD19/27 (875593-6) 27.27104 AQD21A (875811-2) 27.27105 AQD21A-B (875575-3) 27.27106 AQD29/32/40A (875593-6) 27.27104 AQD70B/BL/C/CL/D (875593-6) 27.27104 BB25/30 (875808-8) 27.27109 BB70/100 (875811-2) 27.27105 MB2 (3555413-8) 27.27167 MB10 (875807-0) 27.27107 MB16A/20A/B/C (875808-8) 27.27109 MB18/36A-B (875811-2) 27.27105 MD1/2-1B/2B (875807-0) 27.27107 MD3B (875808-8) 27.27109 MD5A-B-C/6B (875883-7) 27.27120 MD6A/11C (875807-0) 27.27107 MD7A-B/11D (875883-7) 27.27120 MD17C-D/20B (875808-8) 27.27109 MD19/27 (875593-6) 27.27104 MD21A-B (875575-3) 27.27106 MD21A/22 (875811-2) 27.27105 MD29/30/32/40/42A (875593-6) 27.27104 MD47/50/67/70/71/96 (875593-6) 27.27104 VOLVO PENTA Original Reference Article MD100A-B/120A (875660-3) 27.27103 MDH4 (875807-0) 27.27107 TAMD30A (875593-6) 27.27104 TAMD40A-B (875660-3) 27.27103 TAMD60/70/71-TAMP61 (875593-6) 27.27104 TAMD121C 27.27111 TMD30A/40B/50A/70B-C (875593-6) 27.27104 TMD40A-B/100A (875660-3) 27.27103 TMD71/96B/100C (875593-6) 27.27104 TMD100A-C/120A-B (875660-3) 27.27103 TMD120B/121C 27.27111 (3555413-8) 27.27167 (833550/803729) 27.27107 (804696) 27.27109 (885512-5) 27.27151 (897055-825940) 27.27105 (842857) 27.27111 (844683-875697- 845796) 27.27153 (831182-835182) 27.27106 (818680) 27.27102 WESTERBEKE Original Reference Article PILOT 10-20 (11418+11907) 27.27151 4-6 CYL. DIESEL 27.27150 (32620) 27.27120 WIZEMANN Original Reference Article WM36/75T 27.27165 WM130 27.27104 WM180/240/300A 27.27104 WM180/240/300A 27.27103 WM180/240/300/400 27.27103 WM421 27.27103 WM424 27.27111 YANMAR Original Reference Article 1 GM10 (128170-42070) 27.27141 2 GM/GM20 (104211-42070) 27.27107 2 GMF/GMF20 (124223-42091) 27.27140 2 QM/QM15/QM20 (104211-42070) 27.27107 2 QM/QM20 (124223-42091) 27.27140 2 SX 27.27109 3 GM/GM30/QM30 (104211-42070) 27.27107 3 GMF/GMF30/QM30 (124223-42091) 27.27140 3 HM/HMF/HM35/HM35F (124223-42091) 27.27140 4 JH-E/TE/HTE/DTE (129470-42530) 27.27105 PMX6/8 27.27109 YSB8/E8-B12/E12 (104211-42070) 27.27107 (145410-46090) 27.27106 DETROIT DIESEL Original Reference Article (5193602) 27.27104 (5193553) 27.27103 (5196168) 27.27111 (8924838) 27.26135 586 Motorboat components and spare part - Impellers

IMPELLERS Chrysler / Force Article Original Reference HP 2 Stroke HP 4 Stroke Photo Included Insert A mm. B mm. C mm. Blades 27.27005 47-F694065 47-803631T 95-120 gasket 22,20 60,00 33,80 6 27.27080 47-F433065 35-45-55 (1976-1980) 16,00 57,00 15,00 6 27.27081 47-F436065-2 9,9-15 - 12,85 57,00 14,80 6-27.27082 47-F462065 25-35 14,35 57,50 15,00 10 27.27083 47-F525065 6-7,5-8 11,00 36,50 18,10 6 Honda Article Original Reference HP 2 Stroke HP 4 Stroke Photo Included Insert A mm. B mm. C mm. Blades 27.26327 19210-881-003 19210-881-A01 5-7,5-8-10 14,20 41,00 23,00 8 27.26328 19210-ZV4-013 9,9-15 14,20 41,00 27,55 6 27.26337 19210-ZW1-B02 19210-ZW1-B04 75-90-115-130 23,35 87,80 31,00 6 - - 27.26338 19210-ZV5-003 35-40-45-50 17,25 55,75 20,20 6 27.26339 19210-ZV7-003 20-25-30 17,20 55,75 20,20 6 27.26343 19210-ZV4-651 8-9,9-15 14,10 41,00 27,55 6 Motorboat components and spare part - Impellers 587

IMPELLERS ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS Honda Article Original Reference HP 2 Stroke HP 4 Stroke Photo Included Insert A mm. B mm. C mm. Blades 27.26347 19210-ZW9-003 19210-ZW9-013 8-10 13,00 45,60 14,80 6 27.26348 19210-ZW9-A31 8-10 16,20 45,60 14,80 6 27.26391 19210-ZY3-003 175-225 26,00 89,75 31,30 6 27.27010 19210-ZW1-003 19210-ZW1-303 90 22,40 89,00 32,50 6 Johnson / Evinrude Article Original Reference HP 2 Stroke HP 4 Stroke Photo Included Insert A mm. B mm. C mm. Blades 27.26303 396725 / 432954 437080 2cil. 40-60HP 1985-2005 3cil. 60-75 HP 1985-2005 key 19,13 91,50 25,40 6 27.26308 395864 / 397131 435821 / 435748 5001593 V4-V6 key 22,41 89,00 31,90 6 27.26319 9,9-15 9,9-15 12,30 42,00 20,00 6 27.26349 775519 / 377178 9,5-10 14,00 69,00 12,80 6 27.26365 60-70 22,20 78,30 26,00 6 27.26366 775521 / 378891 25,30,35,40 16,00 69,00 12,80 6 27.27024 277181/434424 3-4-5-5,5-6-7,5 11,00 69,00 12,80 6 588 Motorboat components and spare part - Impellers

IMPELLERS Johnson / Evinrude Article Original Reference HP 2 Stroke HP 4 Stroke Photo Included Insert A mm. B mm. C mm. Blades 27.27025 375638 775518 10-15-18-20-25 12,70 69,00 12,80 6 27.27026 377230 777213 25-40 16,04 69,80 22,10 6 27.27027 389589 40-50-55-60 (1979-1985) 16,04 69,20 22,25 6 27.27028 389576 4-4,5-6-7-8 5-6 gasket 11,20 38,40 17,90 6 27.27029 386084 9,9-15 8-9,9-15 12,75 38,40 17,90 6 27.27031 395289 385289 20-25-30-35 key 16,00 51,00 19,00 6 27.27032 399289/391538 V4-V6 22,20 89,30 32,00 6 27.27033 389642 V4-V6 22,32 89,00 31,90 6 27.27034 387361 1,5-2-4-6 11,20 38,40 17,90 6 27.27035 388702 25 gasket 16,00 51,50 19,05 6 27.27036 432941/437059 438592 25(737)-40-50-70-75 key 19,13 91,30 25,40 3 27.27037 379475/397475 STERN DRIVE 22,30 107,80 25,40 6 27.27038 396809 40-48-50 key 16,04 70,00 22,30 6 27.27039 390286 40-70-V4 17,50 51,50 19,00 6 Motorboat components and spare part - Impellers 589

IMPELLERS ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS Yamaha Article Original Reference HP 2 Stroke HP 4 Stroke Photo Included Insert A mm. B mm. C mm. Blades 27.26322 6L5-44352-00 3 MALTA (1990>) 9,90 36,00 14,50 6 27.26363 63V-44352-01 9,9-15 9,9-15 12,85 53,00 14,00 6 27.26364 67F-44352-01 80-100 20,00 58,20 34,70 6 27.26368 68T-44352-00 6-8 11,70 52,80 14,00 6 27.26389 6AW-44352-00 F300-F350 24,60 89,00 36,00 6 27.27012 682-44352-01 8-9,9-15 8-9,9 13,00 40,00 22,00 6 27.27013 662-44352-01-00 6-8 14,00 40,00 22,00 6 27.27018 689-44352 25-30 16,15 69,50 12,80 6 27.27019 6E0-44352-00 4-5 4 11,00 40,00 12,60 6 27.26316 697-44352/ 47-97108/ 6H3-44352 55-70 40-50 18,05 51,80 19,05 6 27.27021 688-44352-03 75-85-90 20,10 58,00 30,00 6 27.27022 6L2-44352-00 20-25 14,10 51,00 19,00 6 590 Motorboat components and spare part - Impellers

IMPELLERS Yamaha Article Original Reference HP 2 Stroke HP 4 Stroke Photo Included Insert A mm. B mm. C mm. Blades 27.27023 6H4-44352-02 776-44352 25-30-40-50 20-25-30 gasket 16,10 51,00 19,00 6 27.27026 676-44352 6F5-44352 25-40 16,04 69,80 22,10 6 27.27050 646-44352-01 2 11,15 47,50 13,70 6 27.27051 6E5-44352-00 da 115 a 300 115-150-200 225-250 22,45 89,00 31,00 6 27.27053 6G1-44352 6-8 11,90 40,00 18,00 6 Mariner Article Original Reference HP 2 Stroke HP 4 Stroke Photo Included Insert A mm. B mm. C mm. Blades 27.26316 47-97108 55-70 40-50 18,05 51,80 19,05 6 27.26378 47-19453T 40-45-50-55-60 19,25 78,20 25,15 6 27.27004 47-89983 47-20268 47-65959 30-50-70 19,00 51,80 19,05 6 27.27005 47-89984T4 47-65960 80-85-90-115 >220-MAG II gasket 22,20 60,00 33,80 6 27.27010 47-43026-T2 47-43262Q02 47-43026-2 70-75-90-100-115 22,40 89,00 32,50 6 27.27013 47-95611M 8-15 14,00 40,00 22,00 6 27.27018 47-84797 25-30 16,15 69,50 12,80 6 27.27019 47-96305M 4-5 11,00 40,00 12,60 6 Motorboat components and spare part - Impellers 591

IMPELLERS ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS Mercruiser Article Original Reference Application Photo Included Insert A mm. B mm. C mm. Blades 27.26159 47-862232A2 8.1S - 496MAG 15,25 66,50 50,60 8 27.27005 47-89984 47-65960 I - ALPHA 1 - MC1 - MR APLHA gasket 22,20 60,00 33,80 6 27.27010 47-43026-T2 GEN. II ALPHA 22,40 89,00 32,50 6 27.27011 47-59362T1 47-59362Q01 BRAVO I - II 19,05 66,50 50,60 8 Mercury Article Original Reference HP 2 Stroke HP 4 Stroke Photo Included Insert A mm. B mm. C mm. Blades 27.26318 47-42038 9,9-15 13,00 58,80 11,70 6 27.26378 47-19453T 40-45-55-60 40-50-60-80 19,25 78,20 25,15 6 27.27002 47-89981 47-65957 4-4,5-5-6-7,5-9,8 11,60 32,00 14,40 6 27.27003 47-89982 47-65958 20 gasket 16,00 51,50 19,05 6 27.27004 47-89983 47-20268 47-65959 30-35-40-45-50-60-65-70 19,00 51,80 19,05 6 27.27005 47-89984 47-F694065 47-803631T 47-65960 2,4-65-70-75-80-85-90-110-115>225-VP gasket 22,20 60,00 33,80 6 27.27006 47-89980 47-68988 3,5-3,6-4-5 11,00 32,00 14,35 6 27.27007 47-85089-3 47-85089-10 18-20-25 8-25-40-50 16,00 73,00 12,60 6 592 Motorboat components and spare part - Impellers

IMPELLERS Mercury Article Original Reference HP 2 Stroke HP 4 Stroke Photo Included Insert A mm. B mm. C mm. Blades 27.27008 47-16154-3 4-5-6 10,25 33,60 14,30 6 27.27009 47-22748 6-9,8 11,60 32,00 14,40 6 27.27010 47-43026T2 70-75-80-90-100-115 22,40 89,00 32,50 6 27.27012 47-84027 8-9,9-15 13,00 40,00 22,00 6 27.27031 47-888689 20-25 (1978-1984) key 16,00 51,00 9,00 6 27.27051 47-898689 225 22,45 89,00 31,00 6 Selva Article Original Reference HP 2 Stroke HP 4 Stroke Photo Included Insert A mm. B mm. C mm. Blades 27.26316 6H3-44352-00 50-60 18,50 51,80 19,05 6 27.26363 63V-44352-01 9,9-15-20 12,85 53,00 14,00 6 27.26364 67F-44352-00 80-100 20,00 58,20 34,70 6 27.26368 68T-44352-00 8 11,70 52,80 14,00 6 27.27019 6E0-44352-00 4 11,00 40,00 12,60 6 Motorboat components and spare part - Impellers 593

IMPELLERS ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS Selva Article Original Reference HP 2 Stroke HP 4 Stroke Photo Included Insert A mm. B mm. C mm. Blades 27.26316 6H3-44352-00 25B-60-70 40-50-60 18,05 51,80 19,05 6 27.27023 6H4-44352-02 30-40-50 20-25-30-40 gasket 16,10 51,00 19,00 6 27.27051 6E5-44352-00 da 115 a 300 115-150-200 225-250 22,45 89,00 31,00 6 Whitehead Article Original Reference HP 2 Stroke HP 4 Stroke Photo Included Insert A mm. B mm. C mm. Blades 27.27000 W5-P022 6-12 12,10 32,00 13,30 6 27.27001 20-25 17,00 51,00 19,10 6 Suzuki Article Original Reference HP 2 Stroke HP 4 Stroke Photo Included Insert A mm. B mm. C mm. Blades 27.26319 17461-93901 17461-92D02 1746-93903 8-9,9 12,30 42,00 20,00 6 27.26329 17461-93902 9,9-15 DF9,9-15 13,20 42,00 22,00 6 27.26336 27.26365 17461-98501 17461-98502 17461-98503 17461-87E00/ 87E10/87E11 2-2,2-4-5-6-8 10,15 41,00 14,00 6 DT90-DT100 DF60-DF70 22,20 78,30 26,00 6-27.26367 17461-94511 17461-90J01 17461-94510 17461-90J00 90-115 24,30 86,00 31,70 6 27.26393 17461-93J00 DF200-DF225 DF250 24,30 87,00 39,00 5 594 Motorboat components and spare part - Impellers

IMPELLERS Suzuki Article Original Reference HP 2 Stroke HP 4 Stroke Photo Included Insert A mm. B mm. C mm. Blades 27.27004 17461-95201 DT55-DT65 19,00 51,80 19,05 6 27.27060 17461-95300/95301/ 95501 DT50-DT60 DT75-DT85 20,10 67,50 19,00 6 27.27061 17461-94700/95201 DT40-DT50 DT60-DT65 17,10 67,00 19,00 6 27.27062 17461-96301 17461-96312 DT20-DT25 DT30- DT35-DT40 DF25-30-40-50 gasket 17,10 67,50 16,18 6 Tohatsu Article Original Reference HP 2 Stroke HP 4 Stroke Photo Included Insert A mm. B mm. C mm. Blades 27.26344 3B2-65021-1 6-8-9,8 tutti 12,12 40,00 18,03 6 27.26379 3C8-6521-2 40-50 17,20 50,40 20,15 6 27.26382 345-65021-0 25-30 17,12 44,10 20,25 6 27.26383 334-65021-0 9,9-15-18 15-18 13,96 40,70 23,35 8 27.26388 3C7-65021-1 3B7-65021-2 70-90-120-140 20,15 67,40 35,10 6 27.27008 369-65021-1 4-5 4-5-6 10,25 33,60 14,30 6 Motorboat components and spare part - Impellers 595

TRASMISSION BELLOWS, COUPLING SLEEVES Mercruiser Trasmission bellows covers transmission STERN DRIVE Original reference: 60932A4 Internal dimension Bellows cable STERN DRIVE Original reference: 23-30617A2 / 74639 / 74639A2 Internal dimension 27.27880 Bellows 27.27881 Bellows Bellows exhaust emission STERN DRIVE Original reference: 18654A1 Internal dimension Exhaust sleeve STERN DRIVE Original reference: 78458A1 Internal dimension 27.27882 Bellows 27.27883 Exhaust sleeve Exhaust coupling sleeve down Ø 4 Original reference: 32-14358T Internal dimension Exhaust coupling sleeve up Ø 4 Original reference: 32-44348T Internal dimension 27.27884 Exhaust 27.27885 Exhaust Exhaust coupling sleeve exhaut down Ø 3 Original reference: 32-90949T Internal dimension Bellows BRAVO I/II/III (ALL) Original reference: 86840A3 Internal dimension 27.27886 Exhaust 27.27887 Bellows Bellows ALPHA GENERATION II Original reference: 816431A1 Internal dimension Bellows DRIVE 1A/1B/1C Original reference: 36223A2 Internal dimension 27.27888 Bellows 27.27889 Bellows 596 Motorboat components and spare part - Trasmission bellows, coupling sleeves

TRASMISSION BELLOWS, COUPLING SLEEVES Mercruiser Exhaust sleeve coupling from HP 120 to HP 198 Original reference: 70981A3 Internal dimension Exhaust sleeve coupling 140/165 HP Original reference: 53114A1 Internal dimension 27.27891 Exhaust Kit with gasket seal ring and 3 oring (art. 27.27890) for Stern Drive, Alpha One model Original reference: 27-64818T4 27.27892 Exhaust Double courve Bravo s sleevs made of plastic for water intake Original reference: 32-43437 27.27893 for mod. 1A, 1B, 1C e EZ - ref. art. 27-35996A1 27.27896 Double courve OMC Cobra Bellows cover trasmission Original reference: 987467 Internal dimension Collar trasmission bellow Sterndrive/Cobra Original reference: 912374-1 Internal dimension 27.27900 Bellows 27.27910 Collar Volvo penta Bellows cover trasmission AQ175-280-T-PT-AQD40-V8 Original reference: 875828-6 / 876633-9 Internal dimension Bellows cover trasmission AQ200-270-275-280-290 Original reference: 876294-0 Internal dimension 27.27871 Bellows 27.27872 Bellows Bellows cover trasmission AQ200-250-270-275-280 Original reference: 876631-3 Internal dimension Double elbow rubber universal sleeve for water intake in stern drive units AQ200-250-270-275-280-290 Original reference: 897599-7 / 875822-9 Internal dimension 27.27873 Bellows 27.27875 Double elbow Motorboat components and spare part- Trasmission bellows, coupling sleeves 597

TRASMISSION BELLOWS, COUPLING SLEEVES Volvo Penta Double elbow Curved water sleeve for DPS-SX engines, with clamps Original reference: 3852352 Bellows cover trasmission Foot: DPG / DPX-A Original reference: 3860384 / 3858139 27.27876 Double elbow 27.27877 Bellows cover trasmission Bellows cover trasmission Foot: DP-S / SX Original reference: 3850426 Gaskets rubber bellows cover trasmission for Sail Drive leg Original reference: 854932 27.27878 Bellows cover trasmission 27.27894 Gaskets Bellows cover trasmission Original reference: 3854127 Coupling sleeve. Foot: AQ-31-41 Original reference: 858955 27.27900 Bellows cover trasmission 27.27901 Coupling seeve Coupling sleeve. Foot: KAD42 Original reference: 860396 Curved water sleeve for 290 / A / DP/ DPA / DPA1 engines. with clamps. Original reference: 876632 27.27902 Coupling seeve 27.27903 Curved water sleeve O-ring for flywheel housing Original reference: 804190 Bellows cover trasmission for shaft SX A / DPS A Original reference: 3888916 Bellows cover trasmission for shaft DPH DPR Original reference: 3594509 / 3808898 27.27904 O-ring 27.27905 Bellows cover trasmission 27.27906 Bellows cover trasmission 598 Motorboat components and spare part - Trasmission bellows, coupling sleeves

CANDLES Artice Type Pack Pcs. 27.27308 J6C 4 27.27333 L6VC 4 27.27302 L20V 4 27.27304 L76V 4 27.27310 L77JC4 10 27.27313 L78C 10 27.27307 L78V 4 27.27343 L78YC 4 27.27311 L82C 10 27.27340 L82YC 10 27.27312 L86C 10 27.27341 L87YC 10 27.27450 N4C-OE079 10 27.27337 N7YC 10 27.27335 N9YC 10 27.27347 QC8WEP 4 27.27348 QC10WEP 4 27.27345 QC10PEPB 6 27.27338 QC12PEP 6 27.27346 QC12PEPB 6 27.27329 QL6VC 4 27.27332 QL16V 4 27.27301 QL76V 4 27.27336 QL77CC 6 Artice Type Pack Pcs. 27.27305 QL77JC4 10 27.27328 QL78C 4 27.27317 QL78YC 4 27.27303 QL78V 4 27.27315 QL82C 4 27.27316 QL82YC 4 27.27319 QL86C 4 27.27327 QL87YC 4 27.27314 RA8HC 4 27.27344 RC9YCC 10 27.27342 RL78C 10 27.27318 RL82C 10 27.27322 RL82YCC 10 27.27323 RL87YC 10 27.27325 RN9YCC 10 27.27334 RS12YC 6 27.27320 RV8C 10 27.27326 RV9YC 4 27.27324 RV12YC 4 27.27321 RV15YC4 10 27.27306 UL77V 8 27.27339 XC12PEPB 4 27.27451 7712 6 Other types on request Champion Spark Artice Type Pack Pcs. 27.27377 B6HS 10 27.27352 B7HS 10 27.27356 B7HS10 10 27.27357 B8HS 10 27.27382 B8HS-10 10 27.27360 B9HS-10 10 27.27372 BP6ES 10 27.27378 BP6HS 10 27.27385 BP7ES 10 27.27373 BP7HS 10 27.27386 BP7HS-10 10 27.27368 BP8HN-10 10 27.27362 BP8HS-10 10 27.27398 BP8HS-15 10 27.27364 BPR5ES 10 27.27395 BPR5HS 10 27.27389 BPR6ES 10 27.27375 BPR6EFS 10 27.27431 BPR6HS 10 27.27439 BPR6HS-10 10 27.27397 BPR7HS-10 10 27.27381 BPZ8HN-10 10 27.27376 BPZ8HS-10 10 27.27374 BR6FS 10 27.27432 BR4HS 10 27.27396 BR5HS 10 27.27383 BR6HS-10 10 27.27350 BR7HS 10 27.27351 BR7HS-10 10 27.27370 BR8ES 10 27.27443 BR8ES-11 10 27.27358 BR8HS 10 27.27355 BR8HS-10 10 Other types on request Artice Type Pack Pcs. 27.27359 BR9HS-10 10 27.27361 BU8H 10 27.27354 BUHW 10 27.27353 BUHW-2 10 27.27380 BUZ8H 10 27.27379 BUZHW 10 27.27369 BUZ-HW-2 10 27.27430 BKR6E 10 27.27393 BKR6ES-11 10 27.27437 BKR6EKU 10 27.27394 BKR7ES-11 10 27.27438 BKR7EKU 10 27.27460 CPR6EA-9 10 27.27442 CR4HSB 10 27.27461 CR5EH-9 10 27.27390 CR5HS 10 27.27309 CR5HSB 10 27.27388 CR6HS 10 27.27463 CR6HSB 10 27.27366 DCPR6E 10 27.27434 DCPR7E 10 27.27436 DPR5EA-9 10 27.27367 DPR6EA-9 10 27.27454 DPR6EB-9 10 27.27452 DPR7EA-9 10 27.27365 DR5HS 10 27.27384 DR6HS 10 27.27363 DR7EA 10 27.27435 DR7ES 10 27.27371 DR8ES 10 27.27445 ILFR6G 4 27.27459 ITR4A-15 4 27.27441 IZFR5G 4 NGK Spark Artice Type Pack Pcs. 27.27444 IZFR5J 10 27.27440 IZFR6K-11 4 27.27455 IZFR6F-11 10 27.27456 LFR4A-E 10 27.27391 LFR5A-11 10 27.27392 LFR6A-11 10 27.27457 LKR-7E 10 27.27387 PZFR5F 10 27.27399 PZFR5F-11 4 27.27349 PZFR6H 4 27.27458 TR55IX 4 27.27433 ZFR7F 10 27.27331 Spark plug wrench mm. 210 Motorboat components and spare part - Spak plugs 599

SECURITY KEY, FORKS, OUTBOARD MOTOR BAGS Security key with lanyard for outboard engines. Article Engine 27.39690 Mercury - Mariner 27.39691 Johnson 4T - Mariner - Suzuki 27.39692 Tohatsu 27.39693 Honda - OMC 27.39694 OMC 27.39695 Yamaha 27.39696 OMC 27.39697 New Suzuki 27.39698 New Honda Cut to regulate auto ignition in case of spillage of the rider from the boat or boats racing. 27.39460 Cut to regulate auto ignition Cut with automatic ignition key and safety wire spiral, universal, because it can open and close the circuit depending on the terminals that are connected. Spare wing nut In anodize aluminium for outboard motor, complete with stainless steel pin. Length 75 mm. Steel fork with plastic cups in rubber. For outboard motors and stern drives washing. 27.27625 Model with inflow of water from one side 27.39461 Cut to regulate auto ignition 27.27560 Spare wing nut 27.27626 Model with influx of water from both sides. Headphone rubber Ø mm. 140, with quick water (like gardening) for washing inboard engines. Telescopic tube mm. 460 mm. 770 light alloy, to adapt to various heights from ground sea inlet. Bag for outboard motor ideal for stowage and transportation. Built in polyester fabric color blue high strength, impact resistant padding. Closure with nylon zipper and adjustable straps to carry by hand or shoulder. 27.27624 Headphone rubber 27.27605 for engine up to 5 HP 27.27615 for engine from 6 to 15 HP Harness with handle for lifting outboard engines. Engine cover PVC coated nylon engine cover UV resistant, color blue Article up to CV up to Kg 27.27618 15 60 27.27619 30 90 27.27627 from 2 to 10 HP 27.27628 from 10 to 20 HP 27.27629 from 20 to 30 HP Tiller extension acceleration universal outboard engines, with button to turn off the engine. Anodized aluminum tube Ø mm. 30.. Engine cover PVC coated nylon engine cover in Royal Blue, the band allows the terminal through an appropriate locking line to make it stick perfectly to the engine. 27.27634 fixed, lenght mm. 600 27.27639 telescopic, adjustable from mm. 800 to mm. 1345 Article A mm. B mm. C mm. HP 27.27630 630 500 360 30/90 27.27631 730 650 400 70/150 600 Motorboat components and spare part - Security key, forks, outboard motor bags

SPOILERS FOR OUBOARD MOTORS Gives following advantages : - Faster start - Boat on plane faster and at lower speed so that fuel consumption is decreased - Less cavitation - Faster veering Spoiler STurbo Hydrofoil Spoiler for outboard and inboard motors, built in black polypropylene polymer. Put on the plate against cavitation with no. 4 bolts (included). 27.27622 Spoiler 27.27623 Spoiler 27.27622 SE Sport Series for engines from 8 up to 200 HP 27.27623 SE Sport Series for upper than 40 HP 27.27690 SE Sport 400 for upper than 40 HP ( mounting without drilling holes in the anticavitation plate) 27.27690 Spoiler Clips Sport to install Sport SE 200/300 without drilling cavitation plate. Installs on all outboard and stern drive models except the following: all Volvo, Mercury 50HP 2 stroke, Mercury 40-50-60HP 4-stroke, Mercury Bravo II and III (ok on Bravo III with 2 anodes under the cavitation plate), Honda 200/225. 27.27633 Clips Sport Motorboat components and spare part - Spoilers for ouboard motors 601

PROPELLERS ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS Propellers in plastic Evinrude - Johnson Engine Article Size Ø x pitch Rotation Mounting Kit Blades 3,5 (4T) since 2011 27.42001 7.30x6 R - 3 Mercury - Mercruiser Tohatsu Engine Article Size Ø x pitch Rotation Mounting Kit Blades 2,5-3,5 (4T) 27.42001 7.30x6 R - 3 Engine Article Size Ø x pitch Rotation Mounting Kit Blades 2,5-3,5 27.42001 7.30x6 R - 3 PROPELLERS Amita Propellers in aluminium Honda Engine Article Size Ø x pitch Rotation Mounting Kit Blades 27.40022 9,25 x 9 9,9A - 15A 3 27.40023 9,25 x 10 8D - 10D - 15D - 20D 27.41023 9,25 x 10 4 27.40027 9,90 x 11 25-30 27.40028 9,90 x 12 BF 40 4T since 2007-50 -60 BF 40 E 75-90 - 115 (until 2009) - 130 # 115 (since 2010) - 135 150-175 - 200 225-250 # 27.40042 11,40 x 12 27.40043 11,10 x 13 R 27.40044 11,10 x 14 27.40051 11,60 x13 27.40052 11,60 x 14 27.40053 11,40 x 15 27.40072 13,50 x 15 27.40073 13,25 x 17 27.40082 14,80 x 17 R 27.40083 14,80 x 17 L 27.40084 14,50 x 19 R 27.40085 14,50 x 19 L # The mounting kit is required for installation of the propeller - 27.42012 27.42015 3 602 Motorboat components and spare part - Propellers

PROPELLERS Evinrude - Johnson - Selva 2T Engine Article Size Ø x pitch Rotation Blades 4-6 (4T) since 2011 27.40006 7,8 x 7 15 HP R4 / RL4 ( 4T ) - 15 HP TE / TEL / PL ( 4T) dal 2011 27.40020 9,25 x 9 9,8 4T Evinrude since 2011 27.40012 8,50 x 8 9,9-15 2T 9,9 ~ 15 4T (until 2001) 27.40024 9,25 x 10 9,9-15 Johnson and Evinrude 4T 2002-07 27.40021 9,25 x 9 15 4T Evinrude since 2011 27.40020 9,25 x 9 20-25-30-35 2T 25-30 Evinrude E-TEC 27.40035 10,10 x 13 25-30 Johnson e Evinrude 4T until 2007 27.40034 10,30 x 12 40-50-60 Johnson 2T and Evinrude 50-60 selva 2T 27.40063 12,25 x 15 27.40042 11,40 x 12 40-50-60 Johnson 4T and Evinrude 27.40043 11,10 x 13 27.40044 11,10 x 14 27.40051 11,60 x13 40-50-60 (4T) 27.40052 11,60 x 14 27.40053 11,40 x 15 40-50-60-75-90-115 Evinrude E-TEC 60-70 old Johnson 4T and Evinrude 70-75-90-100-115-120-140 2T 27.40074 27.40075 13,50 x 15 13,50 x 15 13,25 x 17 13,25 x 17 90-115-140 Johnson 4T and Evinrude 27.40077 13,875 x 19 27.40086 130-150-175-200-225-250-275-300 Evinrude-Johnson 14,80 x 17 27.40087 L 2T-Evinrude E-TEC Cobra 800 and King Cobra until 94 27.40088 R 14,50 x 19 27.40089 L R 3 Mercury - Mercruiser Engine Article Size Ø x pitch Rotation Mounting Kit Blades 4-5-6 HP (since 2011) 27.40006 7,8 x 7 9,9 BIGFOOT 15 e 20 (4t) since 2007 27.40020 9,25 x 9 9,9-10-15 2T-4T e 9,9-15 4T until 2006 27.40029 9,25 x 9-25 2T, 25 4T until 2006 27.40039 10,10 x 13 25 4T since 2007 27.40028 9,90 x 12 40-50-60 2T 30-40 4T # 40xr 2T # 40 Big Foot 75-80-90-100-115-125 2T and 4T # 135-150-200-225-250-300 2T and 4T Alpha one Bravo one # # The mounting kit is required for installation of the propeller 27.40042 11,40 x 12 27.40043 11,10 x 13 R 27.40044 11,10 x 14 27.40042 11,40 x 12 27.40043 11,10 x 13 27.40044 11,10 x 14 27.40072 13,50 x 15 27.40073 13,25 x 17 27.40082 R 14,80 x 17 27.40083 L 27.40084 R 14,50 x 19 27.40085 L 27.42010 27.42011 27.42013 27.42014 3 Motorboat components and spare part - Propellers 603

PROPELLERS ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS Tohatsu Engine Article Size Ø x pitch Rotation Mounting Kit Blades 5 (2T) 4-5-6 (4T) 27.40006 7,8 x 7 9,9-15 e 18 (2T e 4T) 15-20 (4T) 27.40020 9,25 x 9 6-8-9,8 27.40012 8,50 x 8-9,9-15 - 18 2T and 4T 27.40020 9,25 x 9 25-30 2T e 4T, Maxi 2T 27.40028 9,90 x 12 27.40042 11,40 x 12 R 3 40-50 - 60 2T e 4T - Corsa 2T # 27.40043 11,10 x 13 27.42011 27.40044 11,10 x 14 70 since 99-75 - 90-115 - 120-140 since 2002 For engine since 2003 use the kit art. 27.42016 # The mounting kit is required for installation of the propeller 27.40072 13,50 x 15 27.40073 13,25 x 17 - Yamaha - Selva 4T Engine Article Size Ø x pitch Rotation Blades 2,5-4,5 (2T and 4T) 27.40005 7,5 x 7 9,9 4T since 2008-6 - 8 2T 4T 27.40013 8,50 x 8 9,9-15 2T - 9,9 4T until 2007-15 - 20 4T 27.40022 9,25 x 9 27.40023 9,25 x 10 20 2T - 25 2T-4T 27.40025 9,90 x 10 27.40026 9,90 x 11 R 27.40042 11,40 x 12 40-50 - 55 - Top 700 2T - 30B - 40F 3cil, 4T - 40D 4cil, 4T - 50-60 4T 27.40043 11,10 x 13 3 27.40044 11,10 x 14 60-70 - 75-90 - 100-115 - 130-140 2T - 40G - 70-80 - 90-100 - 115 4T 27.40072 13,50 x 15 27.40073 13,25 x 17 150-175 - 200-225 - 250-300 V6 2T-4T - Stern Drive 3.0~4,7 L 27.40082 R 14,80 x 17 27.40083 L 27.40084 R 14,50 x 19 27.40085 L Suzuki Engine Article Size Ø x pitch Rotation Blades 4-5-6 (4T) 27.40007 7,87 x 7 9,9-15 (2T and 4T) 27.40021 9,25 x 9 20-25 - 30 (2T and 4T) 27.40034 10,30 x 12 27.40042 11,40 x 12 40 (2T and 4T) - 50-55 - 60-65 2T 27.40043 11,10 x 13 R 27.40044 11,10 x 14 75-90 - 100-115 - 140 2T - 70 OLD 4T 27.40074 13,50 x 15 3 27.40075 13,25 x 17 70 new - 80-90 - 100-115 - 140 4T 27.40077 13,875 x 19 150-175 - 200-225 - 250 2T 27.40082 R 14,80 x 17 27.40083 L 27.40084 R 14,50 x 19 27.40085 L 604 Motorboat components and spare part - Propellers

PROPELLERS Volvo Penta Engine Article Size Ø x pitch Rotation Blades 27.40210 R 14,80 x 17 Volvo SP (single prop) 27.40211 L trasmis. mod. 270-280 - 290 27.40212 R 14,50 x 19 27.40213 L 3 27.40204 R 14,80 x 17 Volvo SX - OMC King Cobra 27.40205 L since 94 27.40206 R 14,50 x 19 27.40207 L Multi-Fit System that allows you to use only one Solas propeller on engines of different brands Article Descrizione 27.42010 Multi-fit for Mercury 40-60 HP 27.42011 Multi-fit fortohatsu 40-60 HP 27.42012 Multi-fit for Honda 75-130 HP 27.42013 Multi-fit for Mercury 75-125 HP 27.42014 Multi-fit for Mercury 135-250 HP 27.42015 Multi-fit for Honda 135-250 HP 27.42016 Multi-fit for Tohatsu since 2003 27.42010 Multi-fit for Mercury 40-60 HP 27.42011 Multi-fit fortohatsu 40-60 HP 27.42012 Multi-fit for Honda 75-130 HP 27.42013 Multi-fit for Mercury 75-125 HP 27.42014 Multi-fit for Mercury 135-250 HP 27.42015 Multi-fit for Honda 135-250 HP Motorboat components and spare part - Propellers 605

PROPELLERS ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS Eliche Stainless Steel Honda Engine Article Model Size Ø x pitch Rot. Mounting Kit Blades 40-50 - 60 27.40132 New Saturn 11 1/8 x 13-75 - 90-115 fino al 2009-130 27.40143 Rubex NS3 13 1/4 x 17 115 dal 2010-135 - 150-175 - 200-225 - 250 # 27.40155 Rubex NS3 14 x 19 R 27.42034 3 # The mounting kit is required for installation of the propeller Johnson-Evinrude-Omc-Selva Engine Article Model Size Ø x pitch Rot. 9,9-15 Johnson-Evinrude 4T 2002~2007 27.40114 Saturn 9 1/4 x 9 Mounting Kit - Blades 40-50 - 60 Johnson 4T -Evinrude 27.40132 New Saturn 11 1/8 x 13-60 - 70 old Johnson 4T -Evinrude # 27.40143 Rubex NS3 13 1/4 x 17 27.42035 40-50- 60-75 -90-115 Evinrude E-TEC 70-75 - 90-100- 115-120 - 140 Evinrude-Johnson-Selva 2T # 70 new - 80-90 - 100-115 - 140 Johnson 4T -Evinrude 27.40143 Rubex NS3 13 1/4 x 17 27.42037 27.40148 HR Titan 13 7/8 x 19 - R 3 130-150 - 175-200 - 225-250 - 275-300 Evinrude 2T e E-Tec -Johnson 2T OMC Cobra 800 e King Cobra until 94 con calettatura a 15 denti # 27.40155 Rubex NS3 14 x 19 27.42038 150-175 - 200-225 Johnson 4T -Evinrude 4T # # The mounting kit is required for installation of the propeller Mariner - Mercury - Mercruiser Engine Article Model Size Ø x pitch Rot. Mounting KitBlades 40-50 - 60 2T 30-40 - 50-60 4T # 27.40131 New Saturn 11 3/8 x 12 27.40132 New Saturn 11 1/8 x 13 R 27.42010 30 2 T 27.40120 New Saturn 10 1/2 x 11-40 Xr # 27.40132 New Saturn 11 1/8 x 13 27.42011 40 Big Foot 75-80-90-100-115-125 2T e 4T # 135-150-175-200-225-250-275-300 2T e 4T Alpha one Bravo one # 27.40143 Rubex NS3 13 1/4 x 17 27.40155 Rubex NS3 14 x 19 27.42032 3 The mounting kit is required for installation of the propeller Tohatsu Engine Article Model Size Ø x pitch Rot. Mounting KitBlades 40-50 - 60-70 until 99 2T - 4T Corsa, Mega, Xf 70 dal 99-75 - 90-115 - 120-140 until 2002 for engine since 2003 use the kit art. 27.42016 27.40132 New Saturn 11 1/8 x 13 27.42011 R 27.40143 Rubex NS3 13 1/4 x 17 27.42033 3 # The mounting kit is required for installation of the propeller 606 Motorboat components and spare part - Propellers

PROPELLERS Yamaha - Selva 4T Eliche Stainless Steel Engine Article Model Size Ø x pitch Rot. 9,9-15 2T 9,9 4T until 2007, 15-20 4T 27.40115 Saturn 9 1/4 x 10 20 2T, 25 2T - 4T 27.40120 New Saturn 10 1/2 x 11 40-50 - 55 - Top 700 2T 30B - 40F - 40D - 50-60 4T 60-70 - 75-90 - 100-115 - 130-140 2T - 40G - 70-80 - 100 4T # 27.40131 New Saturn 11 3/8 x 12 27.40132 New Saturn 11 1/8 x 13 Mounting Kit 27.40143 Rubex NS3 13 1/4 x 17 R 27.42030 - Blades 3 115 4T # 27.40143 Rubex NS3 13 1/4 x 17 27.42031 150-175 - 200-225 - 250 2T - 4T, 300 2T, 300 V6 4T Stern Drive 3.0L~7.4L # 27.40155 Rubex NS3 14 x 19 27.42031 # The mounting kit is required for installation of the propeller Suzuki Engine Article Model Size Ø x pitch Rot. Mounting Kit Blades 9,9-15 2T - 4T 27.40114 Saturn 9 1/4 x 9 40-50 - 55-60 - 65 2T 40-50 - 60 4T 75-90 - 100-115 - 140 2T 60-70 old 4T 70 new - 80-90 - 100-115 - 140 4T 27.40132 New Saturn 11 1/8 x 13 27.40143 Rubex NS3 13 1/4 x 17 R 27.42035 27.40148 HR Titan 13 7/8 x 19 - - 3 150-175 - 200-225 2T - 4T 27.40168 Rubex L3 15 1/4 x 19 27.42036 # The mounting kit is required for installation of the propeller Article Description 27.42030 Hub kit Rubex for YAMAHA 75-115 HP 27.42031 Hub kit Rubex for YAMAHA 150-300 HP 27.42032 Hub kit Rubex for MERCURY 75-300 HP 27.42033 Hub kit Rubex for TOHATSU 75-140 HP 27.42034 Hub kit Rubex for HONDA 75-250 HP 27.42035 Hub kit Rubex for SUZUKI 75-140 HP 2T 27.42036 Hub kit Rubex for SUZUKI 150-250 HP 27.42037 Hub kit Rubex for OMC 75-140 HP 27.42038 Hub kit Rubex for OMC 150-300 HP Hub kit Rubex for System that allows you to use only one Solas propeller on engines of different brands Motorboat components and spare part - Propellers 607

PROPELLERS ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS DUOPROP Solas propellers for Volvo Penta Duo-Prop DP280, 290 Propellers Aluminum propellers for Diesel engines. KAD300 excluded Propellers Aluminum propellers for gasoline and diesel engines, two units very thin for a maximum speed of 35 knots. Propellers Type C stainless steel propellers are designed to give maximum thrust and speed when needed, thanks to the slim design of the blades. Greater resistance to twisting and fast acceleration. Article Size 27.40253 A3 27.40254 A4 27.40255 A5 27.40256 A6 27.40257 A7 Article Size 27.40263 B3 27.40264 B4 27.40265 B5 27.40266 B6 Article Size 27.40273 C3 27.40274 C4 27.40275 C5 27.40276 C6 FOR MORE INFORMATION ABOUT THESE ARTICLES VISIT THE WEB SITE www.fni.it 608 Motorboat components and spare part - Propellers

MOTOR ACCESSORIES Mirror polished stainless steel anti-theft for outboard motors. Long hasp padlock for anti-theft art. 27.27642/3 Transom protection board PVC. 270 x 98 mm. A B C Article A B C 27.27642 240 36 19 27.27643 297 36 19 Transom reinforcement Anodized aluminium transom reinforcement, black painted Dims. 280x115 mm. 50.50022 Long hasp padlock Transom protection board Flexible PVC transom protection board. It allows the protection both outside and inside. Dims. 400x280. Colour black. 27.27640B white 27.27640N black Transom protection board in PVC mm. 210x300. 43.43671 Plate 27.27646 Black 27.27641B white 27.27641N black Plate protection board PVC transom protection board. 220x300 mm. Plate protection board Wedge-shaped white PVC transom protection. 420x340 mm. Thickness from 22 mm. to 1 mm.. Plate protection board Multi-layer wedge-shaped transom boards, suitable to change the transom angle. Dims. 340x380 22 Spessore Laterale Spessore Laterale 27.27645B white 27.27645N black 1 27.27648 Plate 27.27650 Thickness from 15 mm. to 1 mm. 27.27651 Thickness from 20 mm. to 1 mm. 27.27652 Thickness from 25 mm. 25 to 1 mm. Plate protection board Anodized aluminium transom reinforcement 27.27653 Dims. mm. 200 x 95 27.27654 Dims. mm. 315 x 100 Motorboat components and spare part - Transom Protection 609

MOTOR BRACKET, STAND AND CARRIER FOR OUTBOARD ENGINE Outboard motor bracket, for engines up to 8 HP. Outboard motor bracket, adjustable 0-17 for grp platforms, for engines up to 8/9 HP. Article A mm. B mm. C mm. 30.30450 270 150 222 It is recommended to connect the engine to a safety cable Article A mm. B mm. C mm. 30.30451 260 173 150 It is recommended to connect the engine to a safety cable Outboard motor bracket, reinforced for platforms, engine up to 15 HP. Outboard motor bracket, adjustable (0-17 ) in stainless steel and marine plywood up to 10 HP 30.30452 Support N.B: It is recommended to connect the engine to a safety cable Auxiliary motor bracket on transom rail mounting. Pad dims. 190x240 mm. With hole for tube Ø mm. 22/25. Article A mm. B mm. C mm. 30.30668 260 150 175 N.B.: It is recommended to connect the engine to a safety cable Motor bracket White plastic board motor bracket up to 10 HP, for tubes Ø mm. 22/25. Dims. mm. 220x200. 30.30640 Support 30.30641 Motor bracket N.B: It is recommended to connect the engine to a safety cable N.B: It is recommended to connect the engine to a safety cable Swivel motor bracket for mounting on platform, up to 15 HP and max. weight 35 kg. Tube In stainless steel for motor support pad art. 30.30641. Size lung. mm. 430, Ø. 25 Article A mm. B mm. C mm. 30.30670 350 220 280 N.B: It is recommended to connect the engine to a safety cable 30.30642 Tube 610 Motorboat components and spare part - Motor bracket

MOTOR BRACKET, STAND AND CARRIER FOR OUTBOARD ENGINE Outboard motor bracket In stainless steel and marine plywood folding, with spring. Adjustable in 4 positions, security locking device. Outboard motor bracket in stainless steel and marine plywood, with 2 springs, adjustable in 4 positions. Security locking device, adjustable in 5 angles. A C A C B B D D Article HP A mm. B mm. C mm. D mm. E mm. 30.30617 7 205 240 37 115 85 30.30620 20 210 300 42 115 125 N.B: It is recommended to connect the engine to a safety cable Outboard motor bracket, reinforced multi-layer plywood, 50 mm. thickness, very strong st. steel springs, adjustable in 4 positions, for engines 4 stroke up to 9,9 HP, or 2 stroke 25 HP. E Article HP A mm. B mm. C mm. D mm. E mm. 30.30625 25 210 300 42 140 125 N.B: It is recommended to connect the engine to a safety cable Outboard motor bracket, adjustable with reinforced plastic pad, stainless steel springs, 4-stroke engines up to 10 HP or 30 HP 2 stroke. E A C B D E 30.30730 Motor bracket 30.30735 Motor bracket Light alloy Article A mm. B mm. C mm. D mm. E mm. 30.30730 215 300 50 190 125 30.30735 215 300 50 190 220 N.B: It is recommended to connect the engine to a safety cable Outboard motor bracket, in forged stainless steel with new system Hot Drop, very light and very strong. Plastic pad. For outboard motors up to 80 kg or 35 HP 4 stroke. 30.30738 Support N.B: It is recommended to connect the engine to a safety cable Outboard motor bracket, in anodized cat aluminium, extremely strong, can hold engines up to 25 HP Adjustable in 5 positions with handle. Complete with marine plywood pad and counter flange. Suitable for small/medium boats. Weight 8 kg, Rina declaration no. DIP/890/98 Kw 18,4 25 HP. Article A mm. B mm. C mm. D mm. E mm. 30.30750 275 265 45 170 115 N.B: It is recommended to connect the engine to a safety cable 30.73030 Support N.B: It is recommended to connect the engine to a safety cable Security cable Safety stainless steel plastic coated wire rope, with stainless steel snap hook at each ends, for outboard motors up to 25 HP. Length 600 mm. Plate Anodized cast aluminium plate for inside transom mounting. Dims. 250x175x7 mm. For Art. 30.73030 Marine plywood spare pad. Dims. 245x270x185. Thickness 40 mm. For art. 30.73030 30.30690 Security cable 30.73032 Plate 30.73033 Marine plywood Motorboat components and spare part - Motor bracket 611

MOTOR BRACKET, STAND AND CARRIER FOR OUTBOARD ENGINE CMC Power-Lift electro-hydraulic lift for outboard engines. Built in 6061 T6 aluminum alloy and stainless steel screws. Tank, Pump and plumbing pipes are contained inside Thanks to the remarkable ability to lift is suitable for all 3/4/6 cylinder engines. He has no problem to lift a V6 300HP at full throttle. Complete with position indicator and control panel. Voltage 12V. Lifting Capacity 350Kg, range mm.127. ledge mm.140.. Stern side Engine side 286 189 203 419 180 250 327 429 473 162 250 327 30.65001 electro-hydraulic lift Galvanized steel stand for outboard engine Folding carriers for outboard engine up to 25 HP with holder for fuel tank. Wooden board 320 x 145 mm. Height 900 mm. Maximum weight 50 kg. 30.27650 Up to 30 HP, tube Ø 22 mm. Height 880 mm., board 300x150 mm. 30.27651 Up to 150 HP, tube Ø 30 mm., Height 1120 mm., board 500x250 mm. 30.27653 With rubber wheels 30.27654 With wheels for sand BIG model up to 150 HP. Tube Ø 30 mm. Rubber tires d. 350 mm. Holder for fuel tank. Wooden board 500x250 mm. Wheels plastic 30.27656 Plastic wheels for trolleys. Ideal for and. Ø 250 mm., spindle 25 mm., width 150 mm. 30.27657 Plastic wheels very large for sand with groove for easy running. Ø mm. 390, spindle Ø mm. 25, width mm 180 30.27655 Easel 612 Motorboat components and spare part - Stand and carrier for outboard engine

ELECTRIC BLOWER,AIR SUCTIONS, VENTILATION HOSE Electric blower TMC in-line blower particularly suitable for ventilation and suction in cabins and engine rooms. Voltage 12 V., Consumption 4,5 Amp. Output 168 m3/h, Ø inlet/outlet mm. 80. Dims. mm. 210 x 107 x 112 H Electric blower White ABS blower for ventilation and suction in cabins and engine rooms. Voltage 12 V. B= mm. 127, A=Ø inlet/outlet mm. 76, C= mm. 108 33.34105 Electric blower 33.34110 Electric blower Article Volt Amp Capacity mc/ora Dims. mm. 33.34112 12V 4,5 280 200x165x195 33.34124 24V 2,5 Electric blower Rina approved, particularly suitable for ventilation and suction in engine rooms. Hose connection Ø mm. 70/75. Article Volt Asmp Model Capacity mc/ora Weight kg 33.34212D right 12V 6A 33.34212S left 750 2 33.34224S 24V 5A left Heavy duty electric blower 750 m3/hour, particularly suitable for ventilation and suction in turbo compressed engine rooms. Left Right Air suction and ventilation hose resistant to temperature, built in PVC coated tissue, self extinguishing V(TM)-O, according to UL94 and grade M2 according to NFP92 503 with steel wire reinforcement between the 2 layers. Temperature range : -20 C, +120 C. Rolls length 10 m. PVC hose with rigid PVC crash resistant reinforcement. Smooth inside, very light and flexible, weathering and most chemicals resistant, Ø mm. 70. Roll leght mt. 50. Sold per mt. 22.22080 Ø mm. 80 22.22100 Ø mm. 102 22.22102 Ø mm. 120 22.22670 Tube Motorboat components and spare part - Electric blower,air suctions, ventilation hose 613

CONTROL BOXES, ACCESSORIES Control lever Dual action control lever throttle and shift in one lever. Suitable for any kind of boat with hydraulic gearbox. Chrome finish. Start and warm-up by pulling out the hand levers in the neutral position. Suits cables : C2 C8 - Mach Zero C22 33C Cables 33C ideal for most marine applications. The core is a stainless steel bar d. 1,9 mm. Exterior cover of extruded plastic resistant to abrasion, seawater and usual solvents. Terminals, hub and core are in stainless steel. Coupling-box is in nickel plated brass. Fitted with proper gaskets. 42.41000 MT 3 SINGLE. For one engine 42.41001 MT 3 TWIN. For two engines 42.41050 mt. 5,00 42.41085 mt. 8,50 42.41114 mt. 14,00 Single lever control boxes built in chromed brass, for throttle or gearbox. Suits C2 - C7 - C8 - Mach Zero - C22-33C cables. Dims. mm. A=75 B=160 C=135 D=95 E=75 F=80 Single lever control box Single action flush side mount control for throttle or gearbox. Chromed brass hand levers. Suits C2 - C7 - C8 - Mach Zero - C22-33C cables. E E D D A A B B C F C F 42.41004 Control lever Control box Chromed brass twin control, throttle + gearbox for one engine. Suits C2 - C7 - C8 - Mach Zero - C22-33C cables. Dims. mm. A=75 B=165 C=137 D=95 E=130 F=110 42.42001 Single lever control box Control box AISI 316 twin control, throttle + gearbox for one engine. Suits C2 - C7 - C8 - Mach Zero - C22-33C cables. Dims. mm. A=80 B=180 C=170 D=150 E=180 F=120 42.41005 Control box 42.41008 Control box 614 Motorboat components and spare part - Control boxes

CONTRO BOXES, ACCESSORIES Control box B35 Flush side mount control B35 for throttle or gearbox. Suits: C2 C7 C8 Mach Zero C22 33C cables. 42.42000 Control box B35 Features: Modern and essential design, free of protrusions, which makes them particularly suitable for use on sailboats. Lever and flange in stainless steel 316 for greater resistance to the marine environment. They can be mounted on the bulkhead right or left, horizontally or vertically. Equipped with adjustable clutch accessible to record the accelerator. By the safety switch X41 (optional), the starter motor is only obtained through the inverter in the neutral position. According to EN ISO 11547 with the safety switch X41. For use with all cables except C22. Cables C2, C8, MA- CHZero do not need adaptor. The cables C14, MACH14 need the adaptor kit K71. The cables C5, C16, MACH5 need the adaptor kit K72. The cables C36, MACH36 need the adaptor kit K73. Control box B400 B400 bulkhead control box lever dual action: gas and inverter. 42.42003 Control box B400 Control box B310B B310B bulkhead Control box lever dual action: gas and inverter. Features: Suitable for any kind of boat with outboard motor, inboard, and stern-drive, makes driving easy and safe. For side wall mounting either right of left, horizontally or vertically. Equipped with clutch to regulate the throttle, adjustable from the outside. Pulling-out handle disengages the inverter during the heating operation of the engine. By the safety switch X12 (optional), the starter motor is only obtained through the inverter in the neutral position. Conforms to EN ISO 11547 with the switch X12 safety. Equipped with a locking device of the lever in the neutral position which prevents unintentional switching. Complete with a trim switch in the handle that allows the elevation adjustment foot outboard motors and stern drives. For use with all cables except C22, C36 and MACH36. Cables C5, C16 and MACH5 cables require K35 kit (Art. 42.42069). 42.42004 Control box B310B Motorboat components and spare part - Control boxes 615

CONTRO BOXES, ACCESSORIES Control box Top and side mount dual action controls for throttle and gearbox. Features: For any kind of boat with outboard motor, inboard, and stern-drive, with hydraulic gearbox. Mounts port or starboard, horizontally or vertically. The hub and the lever are made in die-cast aluminium and varnished. Built-in friction drag to prevent throttle creep. Warm-up are done by pulling out the hand levers. With safety switch X12 (optional), start can be done only with gearbox in the neutral position. The model B184 has in the hand levers a trim switch to adjust tilt of outboard and stern-drive. Suitable for all type of control cables. C5 and C16 cables need adapter kit K35, art. 42.42069. 42.42013 B183 42.42014 B184 42.42015 B85 42.42013 B183 With lever lock device 42.42014 B164 With lever lock device and trim switch. 42.42015 B85 With lever lock device, hand lever without jut for use on sailing bo. Control box Dual action single lever for throttle and hydraulic gearbox. Features: Suitable for any kind of boat with outboard motor, inboard and stern-drives. Suitable for all cables with the exception of C4 and C22. Cables C5 and C16 need kit K35 art. 42.42069. Do not allow automatically gearbox clutch when throttle is not at minimum for easy and safe drive. Mounts port or starboard, horizontally or vertically. Built in die-cast aluminium, varnished. Neutral interlock feature to prevent accidental shifting. 42.42008 B89 - color ivory 42.42009 B90 - color black Control box B47-B49 Side mount port or starboard Features: Control box B47 B49. Body in ABS, hand lever in anticorodal. Suitable for any outboard motor. Suit cables : C2 C8 C7 Mach Zero 33C, with kit K25 for engines Yamaha, Suzuki, Chrysler, Mariner. Cable C4 with kit K24 for engines Johnson, Evinrude, Selva, Volvo. Cable C5 for Mercury motors, without kit. Cable C14 with kit K23 for engines OMC since 1979. Cable C16 for Marine motors without kit. 42.42050 B47 color light gray 42.42051 B49 color black 616 Motorboat components and spare part - Control boxes

CONTRO BOXES, ACCESSORIES Control box Two lever single action control Control box Two lever single action control 195 240 42.42020 B58 Throttle + shift, bent hand levers. 42.42021 B59 Throttle + shift straight hand levers. Features: Each lever controls separately the throttle or the gearbox cable. Suitable for any kind of boat with engine : outboard, inboard and stern-drive, with hydraulic gearbox. Flush mount makes them particularly suitable for flying bridge where is more seawater splash. Made in die-cast aluminium with chromed hand lever. Built in friction drag to prevent throttle creep. Gearbox lever provided with release to know exactly the position forward, neutral or reverse. Friction drag and release are adjustable from exterior. Neutral safety switch X12 (optional) to prevent starting in gear. Available with bent or straight levers. Models B58 and B59 supplied with safety lock to avoid accidental engaging of gear when throttle is on. Suitable cables C2 C7 C8 Mach Zero 33 C. Cable C22 needs kit K22 art. 42.42063. 74 150 42.42045 B204 Throttle + shift black color Features: Each lever controls separately the throttle or the gearbox cable. Flush mount makes them particularly suitable for flying bridge where is more seawater splash. Built in die-cast varnished light alloy. Ergonomic soft handle. Friction built in on the throttle lever. Release on the gearbox lever to know the right position of forward, neutral, reverse. Friction and release are adjustable from exterior. Safety switch C12 (optional) allows starting only with gear in neutral position. For easy handling, throttle lever is bent, gearbox one is straight. Models B204 and B208 provided with a safety lock to avoid accidental engaging gear when throttle is on. Suitable cables C2 C7 C8 Mach Zero 33C. C22 needs kit K22 art. 42.42063. Control box B301 Control box B101 White cover and lever. Dual lever control single action, suitable for any engine with hydraulic gear. Release on gear and adjustable friction. Wear Cables C2 C7 C8 Mach Zero 33 C. For cable C22 kit k32 art. 42.42064. Built in cast and chrome plated aluminum. 42.42037 B301 for 1 motor 42.42038 B302 for 2 motors Twin lever box as 42.42038 but single-action 42.42053 B322 throttle + shift 42.42054 B322T only throttle 42.42055 B322S only shift 42.42026 Control box B101 Motorboat components and spare part - Control boxes 617

CONTROL BOXES, ACCESSORIES Control Box Dual Action controls for throttle and gear. Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim. Use all cables. With cable C5 and C16 kit k35 art. 42.42069. Control Box Single lever to control one engine. Control Box Dual lever to control two engines 42.42040 B66 chromed body and lever 42.42030 B65 chromed body and lever 42.42031 B73 body varnished in black colour 42.42032 B76 chromed body and lever with trim 42.42033 B77 body varnished in black colour with trim 42.42041 B74 body varnished in black colour 42.42042 B78 chromed body and lever with trim 42.42043 B79 body varnished in black colour Control Box Single lever dual action controls for throttle and gear. Suitable for any type of boats with outboard, inboard and sterndrive equipped for power plants. Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling. Made of cast and chrome aluminum. Pull-out handle disengages shift for warm engine. Through the safety switch X43 art. 42.42065 (optional) you get the engine to start only in neutral. Internally fitted with friction. Use the cables C2, C8 and CZero. Conforms to EN 11547, in the presence of the safety switch X43. Control fittings 42.42016 Eye terminal Ø mm. 6 42.42018 Gear connection 42.42017 Throttle connection. 42.42019 Cable clamp 42.42035 B103 for one engine 42.42036 B104 for two engines 618 Motorboat components and spare part- Control boxes, accessories

ACCESSORIES CONTROL BOXES X43 Safety switch for B103, B104. X12 Neutral Safety switch Prevents starting in gear. Suitable for B89, B90, B59, B58, B65, B66, B73, B74, B76, B183, B184, B85, B77, B78, B79, B99, B101, B204, B208. 42.42065 Safety switch 42.42060 Safety switch S45 Bracket plate for Control B47, B49. K60 Kit to fit Cable C5, C16 to control box B301 and B302 MACH5. 42.42061 Bracket plate S56 Bracket plate for control B89, B90. 42.42062 Bracket plate 42.42076 Kit K0 Kit K22 to fit cable C22 to controls B58, B59, B204, B208, B203T, B203S. Kit K32 to fit cable C22 to controls B99, B101. 42.42063 Kit K22 42.42064 Kit K32 Kit K23 to fit cables C14 and Mach14 to controls B47/49. Kit K24 to fit cable C4 to controls B47/49 for O.M.C. and Volvo. 42.42066 Kit K23 42.42067 Kit K24. Kit K25 to fit C2, Mach Zero, C7, C8, 33C cable to control B47/49. For Yamaha, Suzuki, Mariner, Chrysler. Kit K35 to fit cables C5, C16 and Mach5 to single lever controls for Mercury and Mariner, except controls B301, B302, B103, B104. 42.42068 Kit K25 42.42069 Kit K35 Motorboat components and spare part - Control boxes accessories 619

ACCESSORIES MOTOR SIDE Kit K51 connection to engine for cable C14 and Mach14 to be used on single lever B89 and B90. Kit K8 for cable C2, Mach Zero on engines Yamaha 20C, 20D, 20V, 25D, 30A and 30G. Kit K56 for cables C2 - MachZero - C8-33C on engines Mercury 42.42084 Kit K51 Kit K57 for cables C2 - MachZero - C8-33C on engines OMC, Johnson, Evinrude 42.42085 Kit K8 KIT K14B for cables C2-C8-MachZero-33C on engines Yamaha 9,9 D / 15 D 42.42086 Kit K56 Kit K14F for cables C2-C8-MachZero-33C on engines Yamaha 9,9 D/FT9,9D / F15A 42.42087 Kit K57 42.42088 Kit K14B 42.42089 Kit K14F Kit K40 for cable C2 - MachZero to Selva Kit K36 for cables C2-C8-MachZero-33C on engines Yamaha 6C / 6D / 8C 42.42090 Kit K40 42.42091 Kit K36 620 Motorboat components and spare part - Control boxes accessories

ENGINE CONTROL CABLES Control cable in traction and compression suitable to transmit control box movement to every kind of outboard, inboard and stern-drive engines. Built with stainless steel core, terminals in stainless steel and nickel plated brass. The outer sheathing in extruded polythene abrasion free and resistant to hydrocarbon, seawater and ultraviolet rays. Made for heavy duty use, are flexible, strong. Wear and tear and corrosion free. According to engine manufacturers rules. Conversion Table Feet - Meters Feet Meters Feet Meters 5 1,53 23 7,03 6 1,83 24 7,33 7 2,14 25 7,62 8 2,44 26 7,93 9 2,75 27 8,23 10 3,05 28 8,54 11 3,36 29 8,84 12 3,66 30 9,15 13 3,97 31 9,45 14 4,27 32 9,76 15 4,59 33 10,06 16 4,88 34 10,37 17 5,19 35 10,67 18 5,49 36 10,98 19 5,80 37 11,28 20 6,10 38 11,58 21 6,41 39 11,89 22 6,72 40 12,20 Motorboat components and spare part - Engine control cables 621

CONTROL CABLE ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS C14 - Control cable - Ø 7 for OMC motors since 1979, stroke 75 mm. C5 - Control cable - Ø 7 for Mercury, Mercruiser, Mariner over 50 HP, stroke 95 mm. Article Ft. Article Ft. Article Ft. 42.42205 5 42.42215 15 42.42225 25 42.42206 6 42.42216 16 42.42208 8 42.42217 17 42.42209 9 42.42218 18 42.42210 10 42.42219 19 42.42211 11 42.42220 20 42.42212 12 42.42222 22 42.42213 13 42.42223 23 42.42214 14 42.42224 24 Article Ft. Article Ft. 42.42308 8 42.42317 17 42.42309 9 42.42318 18 42.42310 10 42.42319 19 42.42311 11 42.42320 20 42.42312 12 42.42322 22 42.42313 13 42.42314 14 42.42315 15 42.42316 16 C2 - Control cable - Ø 7 suitable for every inboard and sterndrive engines with L fittings and on outboard Chrysler, Yamaha, Suzuki, Mariner, Force, Selva, Tohatsu, Honda, Nissan by means of K series. Stroke 87 mm. C8 - Control cable - Ø 8,5 suitable for inboard, and sterndrive engines through L series fitting instead of C2 when the length or when a heavy duty cable is needed. Stroke 87 mm. Article Ft. Article Ft. Article Ft. 42.42605 5 42.42614 14 42.42623 23 42.42606 6 42.42615 15 42.42624 24 42.42607 7 42.42616 16 42.42625 25 42.42608 8 42.42617 17 42.42627 27 42.42609 9 42.42618 18 42.42610 10 42.42619 19 42.42611 11 42.42620 20 42.42612 12 42.42621 21 42.42613 13 42.42622 22 Article Ft. Article Ft. Article Ft. Articolo Ft. 42.42706 6 42.42715 15 42.42724 24 42.42733 33 42.42707 7 42.42716 16 42.4725 25 42.42734 34 42.42708 8 42.42717 17 42.42726 26 42.42736 36 42.42709 9 42.42718 18 42.42727 27 42.42737 37 42.42710 10 42.42719 19 42.42728 28 42.42738 38 42.42711 11 42.42720 20 42.42729 29 42.42739 39 42.42712 12 42.42721 21 42.42730 30 42.42740 40 42.42713 13 42.42722 22 42.42731 31 42.42714 14 42.42723 23 42.42732 32 C22 - Control cable - Ø 10 Control cable designed for heavy duty use on inboard and sterndrive engines through L series instead of C8. Stroke 80 mm. B14 - Stop cable - Ø 7 Designed to stop inboard engines. Can be used also on other application (starter, etc.). Supplied with terminal for the core L 13 and plate for the jacket L 14. Stroke 70mm. Article Ft. 42.02216 16 42.02220 20 C16 - Cavo telecomando per Mariner con potenza fino 37 KW (50 CV), corsa 80 mm. Article Ft. Article Ft. Article Ft. 42.42805 5 42.42814 14 42.42823 23 42.42806 6 42.42815 15 42.42824 24 42.42807 7 42.42816 16 42.42825 25 42.42808 8 42.42817 17 42.42826 26 42.42809 9 42.42818 18 42.42827 27 42.42810 10 42.42819 19 42.42828 28 42.42811 11 42.42820 20 42.42829 29 42.42812 12 42.42821 21 42.42830 30 42.42813 13 42.42822 22 C36 - Control cable - Ø 7 suitable for Mercury, Mercruiser, Mariner Article Ft. 42.42414 14 42.42415 20 42.42419 19 Article Ft. 42.02310 10 42.02312 12 42.02316 16 42.02318 18 622 Motorboat components and spare part - Engine control cables

CONTROL CABLE Cables mach High efficiency and flexibility Features: - Suitable for all outboard, inboard and sterndrive engines. - Very smooth - High flexibility and low bending radius - No maintenance needed - Terminals in stainless steel - Blue jacket resistant to abrasion, UV rays and chemicals MachZero (come C2 - C8) Suitable for outboard, inboard and sterndrive engines, Stroke 87 mm. Mach14 (come C14) To be used on Johnson, Evinrude, OMC engines since 1979 up today. Stroke 75 mm Article Ft. Article Ft. 42.02111 11 42.02124 24 42.02112 12 42.02126 26 42.02113 13 42.02128 28 42.02114 14 42.02130 30 42.02115 15 42.02132 32 42.02116 16 42.02134 34 42.02118 18 42.02136 36 42.02120 20 42.02138 38 42.02122 12 42.02140 40 Article Ft. 42.02414 14 42.02416 16 42.02418 18 42.02420 20 42.02422 22 42.02424 24 42.02426 26 42.02428 28 Mach5 (come C5) - Ø 8 To be used Mercury and Mercruiser engines. Stroke mm 95 Mach36 (come C36) - Ø 8 To be used on Mercury, Mercruiser engines and control boxes series Generation 2. Stroke 85 mm. Article Ft. 42.02514 14 42.02516 16 42.02518 18 42.02520 20 42.02522 22 42.02524 24 42.02526 26 42.02528 28 42.02530 30 Article Ft. 42.02616 16 42.02618 18 42.02620 20 42.02622 22 42.02624 24 Motorboat components and spare part - Engine control cables 623

ACCESSORIES CONTROL CABLE Support Stainless steel bracket for cable stop engine, throttle, fuel valves, etc. Dims. 110x48 mm. Protrusion 30 m. Push-Pull stay rod flush mount or on bracket art. 42.42900. Ideal for Throttle, stop engine, fuel valves, etc. Thread length 5 mm. Tube Ø mm. 14 Length 120 mm. Cables used C2 Mach Zero C7 C8 33C 42.42900 Support 42.42901 Push-Pull stay rod L3 Control cable bracket To be used on cables : C2 - Mach Zero C7 C8 33c. L12 - Pivot To be used on cables : C2 Mach Zero C7 C8 33C 42.42903 Control cable bracket L13 Nipple To be used on cable C4 B14 42.42912 Pivot L14 - Cable clamp To be used on cablei: C2-Mach Zero-C7-C8-33C. 42.42913 Nipple 42.42914 Cable clamp L25 Clevis with inner thread, 10-32 UNF To be used on cables : C2 Mach Zero C7 C8 33C L26 Clevis with inner thread, 1/ 4 x 28 UNF. To be used on cables C22. 42.42915 Clevis 42.42926 Clevis L7 Balljoint Stainless steel balljoint threaded 10.32 UNF. To be used on cables: C2-Mach Zero-C7-C8-33C L23 Selector Dual station selector with single lever controls. Advisable with dual lever. The selector gives a smoother drive and lets using separately throttle and gear, from cabin or from flying bridge. 42.42917 Balljoint 42.42923 Selector 624 Motorboat components and spare part - Engine control cables, accessories

MECHANICAL STEERING, CABLES, ACCESSORIES Features: complete with cable (cable end engine side meets ABYC standards). Stainless steel cable terminal. Body in GRP. The shaft G16 can be put in two positions. 2 Turns from lock-to-lock. Cable stroke 222 mm. Maximum wheel diameter 380 mm. Minimum cable radius 200 mm. Maximum working charge at cable end 900 N (90 kg.). Norske Veritas approved. Suitable for boats with outboard motor up to 40 KW (55 HP). TM48 Mechanical steering 43.43270 G16 Shaft system with black hubcap for TM48. Article Ft. Article Ft. 43.43208 8 43.43211 11 43.43209 9 43.43212 12 43.43210 10 43.43213 13 Steering system T67 With friction brake. Wear cable M58. Stainless steel cable end. Meets ABYC standards. Sea water corrosion resistant. Adjustable friction brake. 90 Bezel with black hubcap. The steering system can be mounted in 4 different positions to have the cable in the best direction. 2,5 turns lock-to-lock. Cable stroke 230 mm. Wheel diameter 380 mm. Min. cable radius 200 mm. Max. working charge at cable end 1200 N (120 kg.). Norske Veritas approved. Suitable for boats with outboard motor up to 40 KW (55 HP). 43.43300 Steering group Article Ft. 43.43307 7 43.43308 8 43.43309 9 43.42310 10 43.43311 11 43.43312 12 43.43313 13 43.43314 14 43.43315 15 42.43316 16 42.43317 17 42.43318 18 Cable M58 for T67 Steering system T85 Wear cable M66. Stainless steel cable end. Meets ABYC standards. Seawater corrosion resistant. 3 turns lock-to-lock. Cable stroke 228 mm. Max. wheel Ø 406 mm. Min. cable radius 200 mm. White hubcap for steering system T67 T85 43.43290 Hubcap 43.43000 Steering group Motorboat components and spare part - Mechanical steering 625

MECHANICAL STEERING, CABLES, ACCESSORIES Rotary steering system T71FC Wear cable M66. Stainless steel cable end. Meets ABYC P17 standards. Seawater corrosion resistant. Particularly suitable with low space behind dashboard. 90 or 20 Bezel. With or without friction brake. 4 turns lock-to-lock. Cable stroke 228 mm. Max. wheel diameter 406 mm. Min. cable radius 200 mm. Norske Veritas approved. Suitable for boats with outboard, inboard, sterndrive motor. Steering system T72fTC Same as T71, but for two cables M66 43.43400 Steering group T71FC 43.43402 Steering group T73NRFC Same as T71, but no-feedback. 43.43401 Steering group Hubcap Compulsory hubcap for steering systems TM86 T71FC 72FC 73NRFC. Cable M66 for T85 T71FC T72FC T73NRFC 43.43430 X34 a 90 color Black 43.43434 X34 a 90 color White 43.43431 X35 a 20 color Black Article Ft. Article Ft. Article Ft. 43.43007 7 43.43016 16 43.43025 25 43.43008 8 43.43017 17 43.43026 26 43.43009 9 43.43018 18 43.43027 27 43.43010 10 43.43019 19 43.43011 11 43.43020 20 43.43012 12 43.43021 21 43.43013 13 43.43022 22 43.43014 14 43.43023 23 43.43015 15 43.43024 24 TM86 - Guide box full of single cable. Built with materials resistant to seawater corrosion, stainless steel cable end, 3.5 turns of the steering wheel, 210 mm. stroke. Conforms to EN 28848 - ABYC P17. Adapter K66 Kit K66 for mounting cable M66 to steering T71 T72 T73 T81 T82 T83. Production before year 2001. 43.43632 Kit Article Ft. 43.43612 12 43.43614 14 43.43616 16 43.43618 18 43.43620 20 Cable M47 for T71 T72 T73. Made before 2001 until stocks are finished.. Article Ft. Article Ft. 43.43423 23 43.43425 25 43.43100 Shaft G86 for TM86 Please note that the steering TM86 - T71FC - T72FC - T73NRFC require the hubcap X34 or X35 to be ordered separately. 626 Motorboat components and spare part - Mechanical steering, cables, accessories

MECHANICAL STEERING, CABLES, ACCESSORIES S40 - Splashwell mounting Seawater corrosion resistant S39 - Transom support with joint made in die cast aluminium and stainless steel. S61 - Transom support Varnished steel transom support mounting. 43.43640 Splashwell mounting 43.43639 Transom support 43.43661 Transom support S55 - Bracket Spare tube Stainless steel Spare tube Aluminum 43.43665 threaded end for support S39. 43.43666 Spare tube for support S39. 43.43667 Spare threaded tube for support S39 43.43668 43.43655 Bracket threaded tube for support S40/S55 43.43669 Nylon nut for transom support tube Plate Transom protection pad complete with support tube transom mount, made in black varnished anodized aluminium. Dims. 208x115 mm. Complete link arm with ball joint 43.43670 Plate 43.43673 for Johnson-Evinrude motors 43.43671 Only transom pad. 43.43674 Complete adjustable link arm with ball joint steering. Only support tube transom mount to be fixed to the transom or the plate 43.43670/1 Steel eye terminal Stainless, threaded 10 MA to change cables with threaded end to eye terminal. Ball joint stainless steel thread M10. Plate for Yamaha Mariner 43.43672 support with tube 43.43280 Steel eye terminal 43.43744 Ball joint 43.43678 Plate A75 Clevis TM48-M55 A73 Complete link arm Mercury Mariner Yamaha Suzuki Tohatsu Force for M55. A74 Complete link arm Johnson Evinrude for M55. 43.43775 Clevis 43.43773 Complete link arm 43.43774 Complete link arm Motorboat components and spare part - Mechanical steering, cables, accessories 627

HOSES, BUSHES, PASSACAVI, CABLE STEERING, STEERING QUARTERDECK Hose for inside canalization, wire passing, etc. Tube Safety system for electric wires of outboard motors made of bush, PVC hose with spiral reinforcement, and terminal Article Ø int. mm. length mt. 27.27552 50 2 27.27555 50 20 Article Ø int. mm. Ø hole mm. length cm. fastening 27.27550 50 70 80 3 viti Terminal bush for art. 27.27555 Bush Fastening bush with no. 3 screws for art. 27.27555. Dims. Ø int. mm. 56, Ø ext. mm. 70, height mm. 48,5, flange Ø mm. 100. 27.27581 Color black 27.27583 Color white 27.27582 Color black 27.27584 Color white Grommet Black plastic cable steering grommet Grommet Plastic cable steering grommet with rubber cap 43.43800 Grommet 43.43808 Ø mm. 72, H mm. 110, Flush 10 mm. Black colour Grommet Plastic cable steering grommet with rubber cap Grommet Plastic cable steering grommet with rubber cap colour black 43.43810B Ø mm. 105, H mm. 65, color white 43.43810N Ø mm. 105, H mm. 65, color black 43.43812 Ø mm. 152, H mm. 110 628 Motorboat components and spare part - Hoses, bushes, cable steering GROMMET

HOSES, BUSHES, PASSACAVI, CABLE STEERING, STEERING QUARTERDECK Cable steering grommet Slot without fasteners. Dims. Length 75 mm. Max. Ø 74 mm. Bore Ø 51 mm. Cable steering grommet Slot without fasteners. Dims. Length mm. 109, Ø Max mm. 103, Bore Ø mm. 69. 43.43813B Color white 43.43813G Color grey 43.43813N Color black 43.43814B Color white 43.43814G Color grey 43.43814N Color black Cable steering grommet Slot without fasteners. Dims. length mm. 172, Ø Max mm. 114, Bore Ø mm. 69. Rubber Cable steering grommet Fast mounting. Can be changed without dismounting any mechanical part. 43.43816B Color white 43.43816G Color grey 43.43816N Color black 43.43815 Headset Rubber cable grommet Adjustable white rubber cable grommet with nylon clamp. Complete with fastening ring. Dims. Ø mm. 105 x height mm. 68. Rubber bellows Length mm. 190, Ø ext. mm. 38, Ø int. mm. 24-10 43.43818 Cable grommet 43.43821 Rubber bellows Bulkhead for hydraulic hose Double bulkhead flange for hydraulic hose 43.43830 Bulkhead 43.43832B Color white 43.43832C Color chromed 43.43832N Color black Motorboat components and spare part - Hoses, bushes, cable steering GROMMET 629

STEERING QUARTERDECK Steering quarterdeck White GRP Steering quarterdeck for rotary steering mounting. Provided with upper object slide and internal housing for battery or jerrycan. Dims. mm. Height 800 x width 400 x depth 400 mm. with hole for door 25.25935. Steering quarterdeck White GRP Steering quarterdeck for rotary steering mounting. Provided with upper object slide and internal housing for battery or jerrycan. Dims. mm. Height 900 x width 650 x 400 depth with hole for door 25.25936 43.43942 Steering quarterdeck 43.43943 Steering quarterdeck Windscreen Blue Plexiglas Roll-bar Stainless steel Ø 22 mm 29.29734 Chromed brass terminals Ø mm. 22 h. mm. 60 43.43972 for art. 43.43942 43.43973 for art. 43.43943 43.43982 for art. 43.43942 43.43983 for art. 43.43943 29.29736 Chromed brass centre stanchion Ø mm. 22 h. mm. 60 630 Motorboat components and spare part - Steering quarterdeck

HYDRAULIC STEERING 43.44664 X64 Square flange permits to install the pump UP20Fin an intermediate dashboard position. Pump UP20F Front mounting. Lock valve to avoid rudder feedback to the helm. Relief valve for over-pressure protection. 3/ 4 tapered shaft. Composite material tank, corrosion resistant. Complete with elbow fittings. Possible flush mounting with flange X64. Weight 3,6 kg. 43.44620 Pump Features: Volume 69 cc. Torque 39 kgm. Thrust 168 kg. Interior diameter 25 mm Stroke 150 mm. A B C D E F G 150mm 129 mm 136 mm 417 mm 31,3 mm 40 mm 73 mm UC69I Balanced cylinder The number of turns lock-to lock is equal port to starboard or vice-versa. 43.44669 Balanced cylinder Article model Disp. revol. n. pistons weight Kg. 43.44628 UP28F 28 cc 5 5 43.44633 UP33F 33 cc 7 5 43.44639 UP39F 39 cc 7 5 Front mount pump. Compact. axial pistons. Built-in lock valve for positive rudder lock. Integral relief valve for over-pressure protection. 3/ 4 tapered stainless steel shaft. Cast iron cylinder rotor for greater durability. Front dash fill. 1/ 4 NPT fittings for 3/8 tube, complete with elbow fittings. Round flange permit to install the pump in an intermediate dashboard position. 43.44664 X64 Square flange for pump mounting 43.44657 X57 Round flange for mounting in an intermediate dashboard position Cylinders Aluminium cylinders, balanced (the number of turns lock-to-lock is equal port to starboard or vice-versa). Article Vol. CC. Torque kgm Thrust Kg. Ø interior A stroke B mm. C mm. D mm. E mm. F mm. G mm. Ø shaft 43.44716 116 58 455 32 178 155 127 464 102 40 73 14 43.44768 168 87 682 40 178 155 127 506 106 40 105 20 43.44815 215 111 682 40 228 199 163 582 131 40 105 20 Motorboat components and spare part - Hydraulic steering 631

STEERING HYDRAULIC ENGINE INBOARD Cylinders Brass cylinders, balanced (the number of turns lock-to-lock is equal port to starboard or vice-versa). Article Vol. CC. Torque kgm Thrust Kg. Ø interior A stroke B mm. C mm. D mm. E mm. F mm. G mm. Ø shaft 43.44293 293 146,5 1155 50 187 163 134 506 107 40 125 20 43.44378 378 187,6 1155 50 228 199 163 592 132,5 40 125 20 Kit for double station mounting or automatic pilot, complete with all fittings for 3/8 nylon or copper tube. 43.44407 Kit for double station mounting How to order hydraulic inboard steering Pump Cylinder Boat mt. Type of hull Nr. Engines 43.44620 43.44669 8-24 ft planing 1 9-27 ft displacement 2 43.44628 43.44716 8,50-28 ft planing 1 43.44628 43.44768 9,50-31 ft displacement 2 43.44633 43.44768 11,60-38 ft 13,40-44 ft 9,70-32 ft 11,60-38 ft planing displacement 1 2 1 2 43.44639 43.44815 13,40-44 ft 15,20-50 ft 11,60-38 ft 13,40-44 ft planing displacement 1 2 2 2 43.44639 43.44293 16-58 ft 18,30-60 ft planing 1 2 14-46 ft 18,30-60 ft displacement 2 2 43.44647 43.44378 18,90-62 ft 19,80-65 ft planing 1 2 18,90-62 ft 19,80-65 ft displacement 2 2 Fittings hydraulic tube oil pag. 641 632 Motorboat components and spare part - Hydraulic steering

HYDRAULIC STEERING Kit Gotech Guidance system board, packaged in kits for single engine up to 115 HP. The kit includes: - Pump UP18 semi-recessed mounted - UC81-OBF cylinder central mounted - Hydraulic oil 2 liters. - Hose Kit ob-gt / m length mt.6 Ø ¼ 43.44605 Kit Gotech. HYDRAULIC STEERING Pump UP20F Front mount. Lock valve for positive rudder lock. Relief valve for over-pressure protection. 3/ 4 Tapered shaft. Corrosion resistant tank. Complete with elbow fittings. Flange X64 permit to install the pump in an intermediate dashboard position. Weight 3,6 kg. 43.44664 X64 Flange to install pump UP20F in an intermediate dashboard position. 43.44620 Pump Features: Cylinder volume 94 cc. Thrust 255 kg. Interior diameter 30 mm. Stroke 186 mm. 3/8 (9,5 mm.) fittings UC94-OBF/1 Front mount cylinder balanced (the number of turns lock-to-lock is equal port to starboard or vice-versa). 43.44695 UC-94-OBF/3 same as art. 43.44694 but with shaped arm 43.44694 Cylinder Engine Honda Mariner Mercury model BF115A-BF130A 4T 75-90-115-OPTIMAX 2T (2004) Engine Mariner, Mercury Honda Yamaha Evinrude Johnson, Selva, Suzuki, Tohatsu model F40/50/60/75/80/90/100/115 EFI 4T - 75/90/115/125/135/150 OPTIMAX 2T 50/75/90 2T - 115/125/150 EFI 2T BF75A-BF90A-BF115-BF130/135-BF150 4T 60-70-75C-90-115C-130B-150F-150 HPDI VMAX 2T F60-F75-F80-F90-F100-F115-F150 EFI 4T All Motorboat components and spare part - Hydraulic steering 633

HYDRAULIC STEERING UC68-OBS Side mount cylinder not balanced (the turns lock-to-lock is not equal port to starboard). Supplied with a swivelling nut for fast mounting on the engine. Cylinder volume 68 cc. Thrust 185 kg. Interior diameter 25 mm. Stroke 203 mm. Fittings 3/8 (9,5 mm.) Kit HYCO-OBF (Hoses are not supplied) contains: - Front mount pump UP20F - Front mount cylinder UC94-OBF/1-2 l. Hydraulic oil - See page 322 for the length of pre-assembled hoses with fittings. 43.44668 Cylinder 43.44610 Kit HYCO-OBF FOR MORE INFORMATION ABOUT THESE ARTICLES VISIT THE WEB SITE www.fni.it 634 Motorboat components and spare part - Hydraulic steering

HYDRAULIC STEERING ACCESSORIES 43.44657 X57 Round flange to install in an intermediate dashboard position Front mount pumps Compact, axial pistons. Lock valve for positive rudder lock. Relief valve for overpressure protection. 3/ 4 tapered stainless steel shaft. Cast iron cylinder rotor for greater durability. Wear 1/ 4 NPT fittings, complete with elbow fittings. Possible to install the pump in an intermediate dashboard position. 43.44664 X64 Square flange to install in an intermediate dashboard position. Article model Displacememt revolution No. pistons Weight Kg. 43.44628 UP28F 28 cc 5 5 43.44633 UP33F 33 cc 7 5 43.44639 UP39F 39 cc 7 5 Features: Cylinder volume Thrust Interior diameter Stroke 132/163 cc 455/563 kg 32 mm 203 mm UC132-OBS Side mount cylinder not balanced (the number of turns lock-to-lock is not equal port to starboard), supplied with swivelling nut for mounting on the engine. 43.44632 Cylinder UC128-OBF/1 Front mount cylinder Balanced ( the number of turns lock-to-lock is equal port to starboard or vice-versa). Straight side arm. Cylinder volume 128 cc Thrust 450 kg Interior diameter 35 mm Stroke 198 mm UC128-OBF/2 Same as art. 43.44728 but with bonded side arm. 43.44729 UC128-OBF/2 544 43.44728 UC128-OBF/1 Front mount cylinder Engine model Mariner all Mercury all Johnson BJ90-115 - 140 4T Yamaha 70B2T 3 cil / F80A - F100A - F115A - F150A 4T Honda all Selva Narwal 115 EFI 4T - Marlin 100 4T Portofino 80-70 2T - Montecarlo 100-90 2T Suzuki DF90-115 - 140-175 4T Engine Yamaha Johnson Evinrude Suzuki Selva Tohatsu model 75C - 90A - 27 3 cil /115 C - 130 B v.4 2T / 150F - 200F - 250 A v.6 2T - 150-175 - 200-250 - 300 hp v.6 2T / F200A - F225A 4T BJ70 4T / J90-115 V4 / J150 175 V6 2T - J200-225 V6 4T All DF70-200 - 225-250 4T Whiteshark 150 hp DFI 2T MD70B - TLDI 2T - MD90B-M120A2-4T M140A2-4T Motorboat components and spare part - Hydraulic steering accessories 635

HYDRAULIC STEERING ACCESSORIES UC146-OB Drake Front mount cylinder, balanced (the number of turns lock-to-lock is equal port to starboard or vice-versa) Features: Cylinder volume Thrust Interior diameter Stroke 146,5cc 525 kg 38 mm 195 mm 43.44640 UC146-OB Drake Installation Kit for Drake cylinder 43.44688 For engines Mercury 2T 4T (not for 115/225 HP 4T) 43.44689 For engines Yamaha 2T - 4T, Suzuki 4T, Johnson/ Evinrude 4T, Mercury 115/225 4T 43.44690 For engines Johnson and Evinrude Ordering please specify the engine model HYDRAULIC INBOARD STEERINGS single engine 350HP or twin engine 700HP The Silver Steer system supports a maximum Pressure higher than that of standard systems. The responsiveness of this pump Pressure is provided by a non-return valve (patent pending). The cylinder provides the technical features that make the system ready and very resilient. UP33F-SVS Front mount pump flow around 33 cc, 7 pistons, valve setting sovrappressure 105 bar, weight kg 5 Kit 2 hoses connected and reinforced by a braided Kevlar stainless steel fittings with swivel nut and reinforcing sleeve mounted on the tube. Required for mounting the pump and cylinder SilverSteer. 43.44833 UP33F-SVS Pump UC128/1 SVS Cylinder front mounting, with right arm. UC128/2 SVS Cylinder front mounting, shaped arm. 43.44850 Length mt. 5 43.44860 Length mt. 6 43.44870 Length mt. 7 43.44880 Length mt. 8 Features: Volume cylinder Thrust Internal diameter Stroke 120cc 450 kg 35 mm 185 mm Features: Volume cylinder Thrust Internal diameter Stroke 120cc 450 kg 35 mm 185 m 43.44836 UC128/1 SVS Cylinder front mounting 43.44837 UC128/2 SVS Cylinder front mounting 636 Motorboat components and spare part - Hydraulic steering accessories

HYDRAULIC STEERING ACCESSORIES A88 - Bar Stainless steel bar for single or dual cylinder type UC68-OBS, UC132- OBS, UC146-OBS and UC146-OBF Drake and with mechanical steering. Adjustable from 650 up to 850 mm. A90 - Bar Stainless steel bar for dual cylinder UC128-OBF. Need order one cylinder with side arm on right and one on left. Suitable for engines with base between 550 and 950 mm. 43.44088 Stainless steel bar 43.44090 Stainless steel bar Standard side arm Standard side arm 43.44731 for UC128-OBF/1 art. 43.44728 43.44732 for UC128-OBF/2 art. 43.44729 Kit no. 2 Hoses R7 5/16 flexible, high resistance, connected with swivelling nut and fittings, for hydraulic steering. Retrievable fitting for thermoplastic hose R7 5/16. 43.44440 Length mt. 4,00 43.44445 Length mt. 4,50 43.44450 Length mt. 5,00 43.44455 Length mt. 5,50 43.44460 Length mt. 6,00 43.44465 Length mt. 6,50 43.44475 Length mt. 7,50 43.44410 Retrievable fitting Bleeding tee coupling 3/8, Nickel-plated brass cylinder. Adjustable coupling 90 Nickel-plated brass for standard pumps and SilverSteer (excluding art.4344605) 43.44435 Fitting 43.44436 Fitting Bubble Buster Portable automated equipment for filling and bleeding of hydraulic systems. Contained in a handy portable box on wheels. Allows a single operator to perform in less than 5 minutes without filling or draining of oil leaks. E connected to all cylinders whose connections are with a quick-vent systems and type DN5 Teleflex. The kit consists of: - unit equipped with a safety valve, switch, 5-liter tank and electric motor 12V 8A. - electric cable mt. 4 full clips for connecting to the battery. - Double Spiral hose mt. 6 for connection to the pump - Spiral tube mt. 6 for connection to the cylinder. 43.44900 Bubble Buster Motorboat components and spare part - Hydraulic steering accessories 637

HYDRAULIC STEERING Hydraulic steering systems for outboard For engines from 85 HP to 300 HP or twin 300 HP with counter-rotating propellers. The only MC300B balanced steering cylinder mounting with fixed tube. An innovative system of tenure and its oil supply allows the tubes to remain firm in their position, not being directly connected to the body of the cylinder. The fact that they are not subject to friction and torque, giving the system the highest rating for safety. Kit GF300BT universal for all engines, including: - Pump-GM2 MRA01 front-mounting, with non-return valve and pressure relief. Possibility of using semi mount square flange included. Pistons 7 Volume 27 cm3 Max 60 bar Weight 5.5 kg. - Cylinder MC300B Volume 130 cm3 Stroke 198 mm - Hydraulic Oil 2 lt, 2 tubes R7 5 / 16 lung. mt. 7.50, connected by only one side + 2 connectors for stranded perform the desired length. 43.44380 Kit GF300BT universal 43.44394 Set of 2 90 bends ideal when little lateral space for the entry of the tubes 43.44381 Mounting bracket for cylinder engines Honda 115/130 43.44382 Mounting bracket for cylinder engines Mercury Optimax 115 Kit GF90BT universal for all engines up to 80 HP, includes: - Pump GM3-MRA mounting, with non-return valve and pressure relief. Can be mounted semi-recessed with square flange included: Pistons 7, Volume 14 cm3, max pressure 50 bar - Cylinder MC90B, volume 75 cm3, 100 mm stroke, rod Ø mm. 12 - Hydraulic oil 1 lt, 2 tubes R7 5/16 length. mt. 5.00, connected by only one side + 2 fittings recoverable to perform the desired length. 43.44390 Kit GF90BT universal 43.44391 Mounting bracket for cylinder engines Yamaha 40/50/60 638 Motorboat components and spare part - Hydraulic steering

HYDRAULIC STEERING Hydraulic steerings for inboard motor. Built with corrosion free material Max. torque 294 nm (=30kgm) Pressure 3923 kpa (=40 kg/cm2) Cylinder stroke 150 mm Cylinder volume 67 cm3 Total rudder angle 70 Bar length 129 mm Cylinder weight 1,8 kg No. turns lock-to-lock 3,4 Pump weight 3,7 Kg. Dims. hose Ø 8x Ø 6mm No. pistons 5 Steering MT30 for boats of 5-7 m. 43.44123 Cylinder MTC 30 43.44109 Pump HTP 20 Max. torque 510 nm (=52kgm) Pressure 5492 kpa (=56 kg/cm2) Torque a 35 e 56 kg/cm2 412 mm (=42 kgm) Cylinder stroke 160 mm. Cylinder volume 104 cm3 Total rudder angle 70 Bar length 140 mm Cylinder weight 3,4 kg No. turns lock-to-lock 5,2 Pump weight 3,7 Kg. Dims. hose plastic Ø 6x Ø 10 mm copper or steel Ø 8x Ø 10 No. pistons 5 Steering MT 52 for boats of 6-10 m. 43.44124 Cylinder MTC 52 43.44110 Pump HTP 30 MTC 52 Steering MT 72 for boats of 7-12 m. Max. torque 706 nm (=72kgm) Pressure 56 kg/cm2 Torque a 35 e 56 kg/cm2 589 mm (=60 kgm) Cylinder stroke 225 mm. Cylinder volume 146 cm3 Total rudder angle 70 Bar length 196 mm Cylinder weight 3,8 kg No. turns lock-to-lock 7,3 Pump weight 3,7 Kg. Dims. hose plastic Ø 6x Ø 10 mm copper or steel Ø 8x Ø 10 No. pistons 5 43.44127 Cylinder MTC 72 43.44110 Pump HTP 30 MTC 72 Motorboat components and spare part- Hydraulic steering 639

HYDRAULIC STEERING Steering MT 125 for boats of 12-15 m. 43.44130 Cylinder MTC125 Max. torque 1226 nm (=125kgm) Pressure 56 kg/cm2 Torque a 35 e 56 kg/cm2 981 mm (=100 kgm) Cylinder stroke 160 mm. Cylinder volume 253 cm3 Total rudder angle 70 Bar length 140 mm Cylinder weight 7,1 kg No. turns lock-to-lock 6 Pump weight 4,1 Kg. Dims. hose plastic Ø 6x Ø 10 mm copper or steel Ø 8x Ø 10 No. pistons 7 43.44114 Pump HTP42 Steering MT 175 for boats of 15-17 m. 43.44131 Cylinder MTC175 Max. torque 1717 nm (=175kgm) Pressure 56 kg/cm2 Torque a 35 e 56 kg/cm2 1373 mm (=140 kgm) Cylinder stroke 225 mm. Cylinder volume 356 cm3 Total rudder angle 70 Bar length 196 mm Cylinder weigh 8 kg No. turns lock-to-lock 8,5 Pump weight 4,1 Kg. Dims. hose plastic Ø 6x Ø 10 mm copper or steel Ø 8x Ø 10 No. pistons 7 43.44114 Pump HTP42 St. steel flange recessed for adaptation pumps art. 43.44109/10/14 MTP from the old model to the new model HTP. Can also be used to install the pump in the retracted position of 38 mm. Comes with 4 stainless steel bolts for assembly. Double lock valve Can be used for dual station or with automatic pilot. To avoid that breakers be reflected on the steering wheel. 43.44117 Flange 43.44151 Valve 640 Motorboat components and spare part - Hydraulic steering

HYDRAULIC STEERING ACCESSORIES Fitting Tee 1/ 4 gas fitting, Nickel plated brass Reusable fittings Reusable hydraulic steering fittings for thermoplastic hose R7 5/16 43.44508 for plastic hose Ø 6x8 mm. thread, or copper tube Ø 8 mm. 43.44509 for art. 43.44500/501 or for copper tube Ø mm. 10 Fitting Nickel plated brass fitting Tee 3/8 gas 43.44510 For copper tube Ø mm. 12 43.44500 Straight fitting 43.44501 Bonded fitting Tee fitting In brass complete with fittings for copper pipe Double swivel 90 curved In brass complete with fittings for copper pipe Article Hose Ø mm. 43.44506 8 43.44507 10 43.44515 12 Article Hole Ø mm. 43.44570 10 43.44572 12 Fitting brass 43.44502/3/12/20/21/22/24 female straight with fittings for copper pipe 43.44530/4/5/7/8/40 female straight with fittings for copper pipe 43.44544/8/9/51/52/54 male curved 90 with fittings for copper pipe 43.44557/8/62/63/64 female curved 90 with fittings for copper pipe Article Article Article Article Thread Tube Ø mm. 43.44502 43.44530 43.44544 1/4 8 43.44503 43.44534 43.44548 43.44557 1/4 10 43.44512 43.44558 1/4 12 43.44520 43.44535 43.44549 3/8 10 43.44521 43.44537 43.44551 43.44562 3/8 12 43.44522 43.44538 43.44552 43.44563 1/2 12 43.44524 43.44540 43.44554 43.44564 1/2 14 By-pass valve Necessary in case of emergency: Hose 43.44406 Plastic hose Ø mm. 6x8 for steering MT 30, roll mt. 15. 43.44414 Thermoplastic high pressure hose from 3/8 sold by meter For copper tube Ø mm. 8 = 1 valve art. 18.18000 + 2 T art. 43.44508 For copper tube Ø mm. 10 = 1 valve art. 18.18000 + 2 T art. 43.44509 For copper tube Ø mm. 12 = 1 valve art. 18.18001 + 2 T art. 43.44510 Thermoplastic hose R7 5/16 high pressure for hydraulic steering 43.44411 Spool mt. 16 43.44412 Spool mt. 24 43.44413 Spool mt. 32 Motorboat components and spare part - Hydraulic steering accessories 641

STEERING WHEELS Traditional marine wheel mahogany with six spokes. Bronze hub and ring Classic wheel mahogany six spokes. Stainless steel rim Ø mm. 550. Chromed brass. Ø 43.45037 Ø mm. 370 43.45049 Ø mm. 490 43.45042 Ø mm. 420 43.45052 Ø mm. 520 43.45058 Classic wheel mahogany Hub cap 43.45059 Polished brass, for classic wheel art. 43.45037/42 43.45061 Polished brass, for classic wheel art. 43.45049/52 Folding steering handle 43.45062 Stainless steel hub cap for classic wheel art. 43.45058/635/735/640/740/845/855 43.45063 Handle Steering wheel with teak rim Stainless steel hub and spokes. Steering wheel with mahogany grip and rim 6 Spoke wheel Same as art. 43.45245, but with white varnished teak grip and rim Steering wheel with grip teak wood and stainless steel spokes 65 115 43.45135 Ø mm. 350 43.45140 Ø mm. 400 43.45240 Ø mm. 400 43.45245 Ø mm. 450 43.45250 Ø mm. 500 43.45345 Ø mm. 450 43.45262 Ø cm. 40 43.45263 Ø cm. 45 43.45264 Ø cm. 50 Steering wheel Stainless steel 5 spokes steering wheel. Aluminum hub coated in black polyurethane. Handle with oval section, Ø mm. 320 Wheel Stainless steel 5 spokes steering wheel. Handle with oval section Steering wheel 6 spoke, stainless steel, with grey soft polyurethane grip and rim H 80 43.45433 Steering wheel 95 43.45440 Ø mm. 400, H mm. 75 43.45540 Ø mm. 400, H mm. 110 43.45545 Ø mm. 450, H mm. 90 43.45845 Ø mm. 450 43.45855 Ø mm. 550 642 Motorboat components and spare part - Steering wheels

STEERING WHEELS Wheel Stainless steel 5 spokes steering wheel with soft polyurethane grip and rim. Wheel 3-spoke steering wheel with grip and steel spokes soft polyurethane-coated steel. 80 Black Grey White Ø mm. 43.45628 43.45728 43.45828 280 43.45635 43.45735 43.45835 350 43.45640 43.45740 43.45840 400 White Grey Black Ø mm. 43.45235 43.45335 43.45435 350 Knob Turning knob for steering wheel Knob Turning knob for steering wheel 43.45070 AISI 316 Stainless steel steering knob. Dims. mm. A=38 B=50 C=20/25 43.45073 White Color 43.45074 Grey Color 43.45075 Wood Color 43.45076 Black Color Wheel for small boats and RIBs. Modern design and ergonomic handgrip. Made in thermoplastic material shock resistant. Ø mm. 335 Wheel Shock resistant thermoplastic 4 strokes steering wheel, suitable for all boats. Ø mm. 342 43.45831 V32 black 43.45832 V32 white 43.45833 V33 black 43.45834 V33 white Steering wheel Shock resistant thermoplastic 3 strokes steering wheel. Soft grip. Ø mm. 380 Steering wheel Corsica Soft grip. Silver strokes Ø mm. 350 43.45838 V 38 black 43.45839 V 38 grey 43.45825 Black 43.45826 White 43.45827 Grey Motorboat components and spare part - Steering wheels 643

TRIM TABS, ACCESSORIES Kit SLT The SLT kit reacts instantly to the speed of the boat and the water pressure, by changing the trim when it is necessary. At slow speeds, before the plane, the cylinders push down the plates, lowering the bow and keeping the boat in trim. In planing boat speed increases and the pressure of the water pushes up the plates. In short the SLT kit improves the sailing conditions maintaining the ideal set by reducing the work of the engine and the fuel consumption with reduction of rolling and pitching. The kit includes: a pair of stainless steel plate with the exclusive removable hinge Bennett and pair of composite cylinders. Article Dims. tabs mm. Boat mt. 54.10802 150x200 3-4,5 54.10803 250x250 4,6-5,5 Trim tabs kit Trim tabs kit for small boats. The particular shape of the blades provides a force on plane 30% higher than conventional flaps. Thanks to their space-saving design can be installed on any stern. The kit contains: control flaps electro hydraulic with oil tank, 2 actuators (length mm. 350 mm stroke. 63), 2 stainless steel tables, joints, hydraulic hose mt. 6, shielded electrical cable mt. 6.50, control panel with 2 toggle switches. Article Volt Dims. tabs mm Boat mt. 54.10807 200x250 5-6 12 54.10808 250x300 6-7 Trim tabs kit Electro-Hydraulic trim tab control panel complete with pump, oil tank, 2 actuators (length 350 mm., stroke 63 mm.) fittings, 6 m. hydraulic hose, 6,5 m. screened electric cable. (switch and panel on request). 54.10812 Voltage 12V 54.10824 Voltage 24V 2 tactile switches Dims. mm.70x70x40 depth Kit to drive 4 hydraulic cylinders actuators. Complete with 2 cylinders actuators and fittings. Warning : Never push at same time buttons up and down. Motor is irretrievably damaged (burnt). To avoid motor damaged use relay art. 54.10826, 54.10827. 54.10829 Panel Relè to avoid control panel burnt when buttons up-down pushed at same time. 54.10830 Kit to drive 4 hydraulic cylinders actuators. ATR control to put tabs back to rest position pulling out starter key, not to damage stainless steel shaft. 54.10826 RM 12-12 V 54.10827 RM 24-24 V 54.10862 voltage 12V 54.10864 voltage 24V 644 Motorboat components and spare part - Trim tabs, accessories

TRIM TABS, ACCESSORIES Gauges to know the position of trim tabs Sensor cable 6 m. length. Analogue instruments kit Ø mm. 52 Trim indicator with variable light trim for day and night, provided with an automatic trim tabs closure system. Pulling out the starter key tabs automatically go to rest position. Completely tight. Dims. mm. 70 x 70 Article Description Volt 54.10842 for single station 12V 54.10844 for double station 12V 54.10846 for single station 24V 54.10848 for double station 24V TPI 2000 Panel Gauges to know the position of trim tabs. Sensor cable 6 m. length. Digital led instruments kit with variable light for day and night. 825x635x19 mm., 12 V. Dims. mm. 825 x 635 x 19. 54.10850 Voltage 12 V 54.10851 Voltage 24 V Sensor to know trim tabs position 54.10852 for single station 54.10854 for double station Kit fittings 54.10837 green cable 54.10838 red cable Hydraulic actuator cylinder 54.10835 for control panel 54.10871 for double cylinder 54.10869 Length 300 mm., stroke 58 mm. 54.10870 Length 350 mm., stroke 63 mm. Hydraulic hose Electro-hydraulic control panel 54.10860 m. 6, Ø interior mm. 4, exterior Ø mm. 6,5 54.10832 Voltage 12V 54.10834 Voltage 24V Solenoid valves Electric cable 54.10872 green cable 12V 54.10882 red cable 12V 54.10874 green cable 24V 54.10884 red cable 24V 54.10865 Screened electric cable 6.5 m. Motorboat components and spare part - Trim tabs, accessories 645

TRIM TABS, ACCESSORIES Pair of stainless steel tabs 3 mm. thickness mm. 3 Pair of stainless steel tabs original Bennet ATF SPEED D III ISO 32 Oil red special hydraulic oil has special requirements for use in inverters, hydraulic steering and trim tabs. Details DEXRON III, Allison C-4 - Mercon, Voith G 607 - ZF TE ML 14, MB 236.9 1 liter bottle, pack 24 pcs. Article Dims. mm. Boat mt. 54.54840 400x230 7 54.54850 500x230 8 54.54860 600x230 10 Article Dims. mm. Boat mt. 54.10930 305x229 5 54.10940 406x229 7 54.10950 508x229 8 54.10960 610x229 10 23.16260 Hydraulic oil Electro-mechanic actuators 12 V complete with control panel. It is a new mechanism in the cylinder : an electric motor drives gears driving the piston. Accurate and powerful, can be compared to hydraulic models. Stroke 61 mm. Spare 54.54815 Electro-mechanic actuators 12 V 54.54817 Spare electro-mechanic cylinder 54.54818 Spare control panel Pair of inductive sensor to check trim tabs angle. Very easy mounting on transom near trim tabs. Completely tight with 12 m. cable and stainless steel mounting brackets. ( To combine with panel art. 54.54824 or with indicator art. 54.54825) LCD display panel showing trim tabs angle in 2 scales with figure from 0 to 9. Green light on screen. 12/24 V power. Dims. 85x50 mm. To combine with art. 54.54823 Trim tabs angle LED indicator 2 scales with red LED, can be seen also with sun. Complete with feeder. Flush mount Ø mm. 52. To combine with art 54.54823 54.54823 Pair of inductive sensor 54.54824 LCD display panel 54.54826 Trim tabs angle LED indicator 646 Motorboat components and spare part - Trim tabs, accessories

CORRETTORI D ASSETTO ELETTROMECCANICI UFLEX MT TRIM TABS, ACCESSORIES Electromechanical trim tabs UFLEX MT The trim tabs system UFLEX MT works by ball screw in hardened steel, suitable to withstand high thrust loads. Actuators are fully waterproof in thermoplastic resin, water resistance is ensured by a double seal and the presence of the bellows (patented). The moving part of the actuator is protected from the attack of the marine environment, its installation is facilitated by the system hub-mounting bracket snap-in (patented) with electrical cable through protected to prevent abrasion. Stem and stainless steel wings. The system requires no maintenance. Kit Trim Tabs MT 54.54830 Kit Trim Tabs MT Features: - 12V power supply - Total length 301 mm actuator closed - Stroke: 57 mm - Grade of protection IP68 Kit Trim Tabs MT included: - 1 pair of actuators black 12V - 1 joystick EASYJOY The tables are not included in the package, you must order them separately and specify size when ordering. See page 433 Easyjoy compact device with joystick control (patented). Includes auto line-up (function of automatic realignment of the tabs). Comes complete with connecting cables. 54.54838 Easyjoy Bracket adjustment / replacement BENNETT systems Allows installations of the TRIM TABS pistons using the mounting holes in the case of existing installations of previous systems BENNETT. Actuator and black bracket 12V 54.54836 Bracket 54.54834 Actuator and bracket Motorboat components and spare part - Trim tabs, accessories 647

SELF-ADHESIVE LETTERS, NUMERIS Self adhesive letters and numbers For boats registration, according to new rules of Mercantile Marine Ministry. Provided of self-alignment system. Salt moisture resistant adhesive. Black White Light blue Red Height mm. 59.59000 59.59017 59.59018 100 59.59001 59.59016 150 59.59002 59.59015 59.59014 200 59.59008 250 Self adhesive Gomfix letters and numbers, black colour, Very flexible, self modelling, they perfectly adhere to rubber inflatable boats tubulars. Black Height mm. 59.59025 50 59.59026 150 Caution: to order specify number or letter to the end of the code required. Es. Letter b mm. 200 Black code 59.59002B, number 3 mm. 100 Blue code 59.590173 Self adhesive tape for water line Article Description Color Article Description Color Article Description Color 59.59029AZ 59.59029B 59.59030AZ 59.59030B 59.59031AZ 59.59031B 59.59029BL 59.59030BL 59.59031BL 59.59029G h. 20x20 mt. 59.59030G h. 30x20 mt. 59.59031G h. 45x20 mt. 59.59029N 59.59030N 59.59031N 59.59029R 59.59030R 59.59031R 59.59029V 59.59030V 59.59031V 59.59032AZ 59.59032B 59.59033AZ 59.59033B 59.59032BL 59.59033BL 59.59032G h. 30x50 mt. 59.59033G h. 45x50 mt. 59.59032N 59.59033N 59.59032R 59.59033R 59.59032V 59.59033V HOLIDAY STRIP tape made in PVC 1/10, with 3 stripes. Article Description Color Article Description Color 59.59039AZ 59.59039B 59.59040AZ 59.59040B 59.59039BL 59.59040BL 59.59039G h. 20x20 mt. 59.59040N h. 45x50 mt. 59.59039N 59.59040R 59.59039R 59.59040V 59.59039V 648 Motorboat components and spare part - Self-adhesive letters, numbers

LUBRICANTS, CLEANERS, PROTECTIVES Spray gun 1 It. 6-66 Marine Protective fluid, penetrating specific against corrosion and short circuit in the salty atmosphere. Idroespellente does not alter the conductivity of electrical contacts, loosens, cleans and lubricates. 64.64539 Spray ml. 200+100. pack 24 pcs 64.64541 Spray ml. 400. pack 24 pcs 64.64543 lattina 5 It. pack 4 pcs 64.64545 Spray gun Adhesive Lub Marine Highly adhesive lubricant quality can not be removed from water vapor, penetrating, anti-corrosion covering waterproofing sealant, resistant to high temperatures. Spray ml. 400. Pack 12 pcs Motor starter Facilitates the cold start of gasoline or diesel of any power. Spray ml. 200. Pack 12 pcs Marine-Silicone Hydro expelling waterproofing. Prevent aging and makes waterproof sails, tents, clothing, tires, motorboat or car, keeping them strong and resilient. Spray ml. 400. Pack 12 pcs 64.64550 Lubricant Lithium Grease + PTFE Grease PTFE lithium grease and no run-off, resists high pressures and temperatures up to 170 C. Protects against corrosion, wear and seizing, with prolonged effect. Spray ml. 300. Pack 12 pcs 64.64546 Motor starter Long Term Protection Marine Long-term corrosion protection for marine equipment. Protects against corrosion, ferrous and non ferrous alloys, for two years or more indoors and under normal conditions. Evenly spread over the surface of the metal penetrating through. Rejects and expels the moisture in saturated atmospheres and salt. It forms a thin, smooth and stable up to + 150 C. Spray 300 ml. Pack 12 pcs 64.64551 Hydro expellin Contact cleaner Pure solvents and detergents to highly sensitive electronic and electrical equipment. Spray ml. 150. Pack 12 pcs 64.64552 Grease Blue grease Synthetic grease strongly adhesive, water-repellent is not removable from rain, water jets and centrifugal force. Tube ml. 125. Pack 12 pcs 64.64553 Protection Leak finder Find leaks. Immediately locate the leakage of gas (cold, hot, refrigerants, GPL, flammable and compressed air). Not corrosive, stain and damage: plastic, rubber, steel, etc...spray ml. 500. Pack 12 pcs 64.64554 Solvents and detergents 64.64555 Grease 64.64562 Find leaks Motorboat components and spare part - Lubricants, cleaners, protectives 649

LUBRICANTS, CLEANERS, PROTECTIVES K9 Multifunctional product protective, insulating releasing agent, detergent, lubricant, forms a film which isolates from the environment and thanks to the exclusive Bardahl additive confers to the surfaces a drastic reduction of friction by increasing the flowability. Suitable for all uses of the workshop, the boating, fishing, and maintenance of weapons. Contains Formula: BARDAHL POLAR PLUS. Spray ml. 400. Synt - It s an extra synthesis lubrificant that can work in hard conditions of temperature and friction. For high viscosity index, low freezing point and high corrosion resistance, it is expecially fit for lubrification and protection of leverages, gears, drive chains and other mechanic equipments workingin hard conditions. Spray ml. 400. 23.16290 Multifunctional product protective TK 1 - Lubrificante sbloccante spray. Penetra e scioglie la ruggine consentendo lo smontaggio di parti meccaniche e collegamenti filettati. Espelle l umidità e protegge dall ossidazione gli impianti elettrici facilitandone l avviamento. Non intacca le materie plastiche e le vernici, non contiene siliconi. Areosol ml. 400. Conf. 6 pz. 64.64620 Synthetic grease spray TK 2 - Lubrificante protettivo spray. Riduce la manutenzione, protegge i motori e le apparecchiature meccaniche operanti in ambienti marini o corrosivi. La sua azione protettiva e lubrificante dura oltre un anno. Non intacca la gomma, le vernici e le materie plastiche. Areosol ml. 400. Conf. 6 pz. 64.64626 Lubrificante TK 1 - Penetrates and melts the rust ùallowing disassembly of mechanic parts and threaded links. Expels the water and protects the electrical impulses. Melts and protects from ice locks and equipment working in outer places. It doesn t corrode the plastic and paints, cleans and lubricates precision equipments. It doesn t contain silicones. Spray ml. 400. 64.64627 Lubrificante Grease, petroleum jelly technique Lubricant dense, protective, adherent, persistent, colorless, ecological, inert. Protective and non-hardening sealant. Difficult to be removed from the water. Antiadhesive for seals and locks, prevents the corrosion of metals and protects the rubber. Makes sliding wooden parts and reduces the wettability of the fabrics. Tube 125 ml. Box 12 pcs. 64.64628 Special lubricant Vaseline oil technique fluid lubricant, protective, adherent, persistent, ecological, inert machine tools, transmissions, locks, hinges, fasteners threaded. Difficult to be removed from the water. Antiadhesive for seals and locks, prevents the corrosion of metals and protects the rubber. Reduces the wettability of the fabrics. Aerosol ml. 200. Pack of 6 pcs. 64.64557 Lubricant dense Multipurpose spray product waterproof, grease, protective and detergent. Protect from moisture by forming a film against water and salt. Protects all metal parts against marine corrosion, lubricates the igniters eliminating squeaks on the boat and providing a good degreaser. Remove the salt from the chains and protects against the corrosive effects. Spray ml. 500. 64.64558 Lubrificant 64.64585 Multipurpose spray PLS Protective oil Lubricates, protects and removes moisture. This product has a potent and penetrating lubricant, eliminates moisture, prevents corrosion and clean. It is composed of solvents, oils, wetting agents and penetrating, water repellent and protective clothing. Dielectric break 3,300 Volts. USDA authorized. Approved against the specific NAV-MM-10B/PC ediz.1/93. Meets Specification MIL C 81309 D TIP II Cl 2. 64.64684 spray 538 ml 64.64685 tank 3,8 lt 650 Motorboat components and spare part - Lubricants, cleaners, protectives

SOUND ABSORBING AND INSULATING, ACCESSORIES Sound Absorber is a polyurethane resin, density 30 kg/m3, self-extinguishing, non-drip, open-cell, suitable to break the sound waves. Fire resistance according to UL94-HF1 standard. Thickness mm. 40. Sheet mm. 1000 x 2000. Supplied in sheets Sound Absorber is a polyester-based polyurethane foam, density 25 kg/m3, self-extinguishing, non-drip, trimmed with film surface that close the cell foam to prevent the passage of dust, condensation, splashing water, oil, etc. Resistance to fire UL94-HF1. Thickness mm. 35. Sheet mm. 1000 x 2000. Supplied in sheets. 65.67202 Sound Absorber Adhesive sound insulation achieved by the coupling of two layers of self-extinguishing polyester resin. Class 1 within an EPDM polymer plate 2 mm., weight 4 kg/sqm. Absorbing medium and low frequencies. Exposed surface coated with a layer of dithered aluminum very shock resistant. Ideal for the isolation of environments, engine compartments, partition walls, to prevent the transmission of heat, etc.. Thickness mm. 12.5. Sheet mm. 1000 x 750. Packed 4 pcs.. Supplied in sheets 65.67101 Sound Absorber Sound insulation in polyester resin expanded high density 60 kg/m3, fireproof class 1, with inside a polymer plate EPDM 2 mm having a weight 4 kg/sqm. Exposed surface coated with an aluminum film very smooth shock resistant. Ideal for the isolation of environments, engine compartments, partition walls, to prevent the transmission of heat, etc.. Thickness mm. 20. Sheet mm. 1000 x 1500. Supplied in sheets 65.67212 Adhesive sound insulation 65.67220 Sound insulation Sound insulation achieved by the coupling of two layers of polyester resin self-extinguishing, with inside a polymer plate EPDM 2 mm., weight 4 kg/sqm. Absorbing medium and low frequencies. Visible surface coated with fiber glass to prevent the transmission of heat and noise. Ideal for isolation of spaces, engine compartments, partitions, etc.. Thickness mm. 26. Sheet mm. 1000 x 1500. Sold plate. 65.67230 Sound insulation Motorboat components and spare part - Sound absorbing and insulation 651

ACCESSORI ACCESSORI, RICAMBI MOTORE - MOTORBOAT SPARE PARTS, COMPONENTS Vetrotex - Insulating felt, anti-fire class 0 (non-flammable), 100 % made of glass textile white filaments type E, properly assembled and closely bound with a special mechanic process without chemical binders. Sight surface coated with glass fibre aluminium coated tear resistant to avoid heat transmission. Resistant to water, steam, acids and oils. Heat-insulating, high sound insulation, resistant to biological and chemical agents (bacterium, fungus, moulds). Working temperature 600 C, maximum temp. 700 C. Thickness 10 mm. Height 200 mm. 5 m. rolls. Special glue to stick different kinds of sound-insulating. Can 0,850 kg 65.67382 Insulating felt 64.64500 Special glue Tape Silver metal polyester tape for sound insulating panels finishing. Height 50 mm. 50 m. rolls Arpione to fix sound absorbing/isulating 59.01695 Silver metal polyester tape 65.67841 Arpione Washer Aluminium washer to fasten different kind of sound-insulating panels. Ø 40 mm. Hole Ø 4 mm. Thickness 2,5 mm 65.67840 Washer 652 Motorboat components and spare part - Accessories