HEADQUARTERS Purinova Sp. z o.o. ul. Wojska Polskiego 65 85-825 Bydgoszcz, Poland phone +48 523614710 fax +48 523614711 email purinova@purinova.com SALES DEPARTMENT phone +48 52 36 14 727, Marcin 722 150 006, Milena 722 254 314, Tomek 722 251 178, email dh@purinova.com SERVICE phone 660 624 722 email service@purinova.com www.izopianol.com www.purinova.com

INTRODUCTION SPRAY SYSTEMS Purinova Sp. z o.o. is engaged in the manufacture of polyester polyols, polyurethane systems and synthetic esters. The company is located on the premises of the former chemical complex Zachem S.A. in Bydgoszcz, which was involved in the production of polyester polyols as well as polyurethane systems and adhesives for over 30 years. Purinova Sp. z o.o. continues this production, but also develops its own know-how and implements new technologies. Using the knowledge and experience of our technological staff as well as laboratory and research facilities, we are prepared to fulfil orders tailored to the individual needs of our Customers. We continuously develop and our position on the Polish and international markets becomes stronger and stronger. In recent years, two-component spray polyurethane foam has been a very popular and convincing method of thermal insulation. It is fast, durable, easy to apply and, above all, results in insulation of such quality that cannot be found in traditional building insulation methods. 2 3

Processing a two-component PUR system involves the use of special high and low pressure machines. At the site of application, the two components are heated up, mixed and then applied on the selected surfaces under pressure. Purinova is the official distributor of GARRAF MAQUINARIA in Poland and the Baltic countries Purinova complies with the European CE requirements. Our high-quality products are compliant with the most recent harmonised EN 14315-1 standard. Due to their properties, our products are divided into: Open-cell foams: The best thermal conductivity coefficient on the market - lambda = 0.034-0.036 W/(m 2 K) Closed-cell foams: The best thermal conductivity coefficient on the market - lambda = 0.020-0.022 W/(m 2 K) Izopianol 03/10 N/Z Izopianol 03/10 N Izopianol 03/10 N/S Izopianol 03/10 N/FR Izopianol 03/35 N/03 Izopianol 03/35 N/08 Izopianol 03/35 N/39 Izopianol 03/35 N/600 Izopianol 03/35 N/077 Izopianol 03/35 N/ECO Izopianol 05/55 N/03 4 5

POURING/ COOLING SYSTEMS The growing demand for energy saving resulted in the use of the best thermal insulation materials for the production of devices. Due to its lowest thermal conductivity, polyurethane foam is perfect for this purpose, both in high- and low-temperature insulation. Izopianol polyurethane systems by Purinova ensure the highest quality of insulation and energy efficiency of devices used both in households and the food industry. These systems are successfully used in the production of freezers, refrigerators, refrigerated display cabinets, cold rooms and refrigerated islands. They are also used for thermal insulation of various car bodies. Purinova offers its Customers comprehensive assistance in the implementation and proper processing of polyurethane systems. cooling: Izopianol 40/30 C Izopianol 40/30 C/01 Izopianol 15/30 FA Izopainol 10/25 CP Izopianol 22/30 W PRODUCTS: pouring: Izopianol 15/45 M/01 Izopianol 10/33 R/26 Izopainol 20/35 FA Izopainol 20/10 Z Izopianol 60/30 Izopianol 20/30 IS Izopianol 20/30 W/01 Izopianol 30/40 W/01 6 7

PRE-INSULATED PIPES Our company offers a wide range of products intended for district heating: Purinova offers its Customers comprehensive services consisting of: selecting a suitable dispensing device choosing the appropriate polyurethane system providing training and broadly understood service Pre-insulated systems for underground and overhead heating networks. Systems for the production of insulation elements made by a traditional moulding method - the so-called slates. In-situ systems for the renovation of existing overhead insulations involving dismantling of old insulation from a steel pipe and covering it with an outer casing and then filling the space with polyurethane foam, using a suitable aggregate. The process is repetitive and is done on site. This solution is also suitable for filling the so-called couplings connecting 6 to 12-meter long pre-insulated elements. RE-INSULATED PIPES: Izopianol 40/30 CP/PIR Izopianol 40/30 W/PIR Izopainol 40/30 W/PIR/01 Izopainol 40/30 W/PIR/02 SLATES: Izopianol 22/33 OT-P Izopianol 22/33 OT-P/01 Izopianol 20/35 OT-P/PIR/01 Izopianol PA 20/45 PIR Izopainol 08/10 OT-P IN-SITU PIPE INSULATION FOAMS: Izopianol 40/45 OT-P/PIR Izopianol 22/33 OT-P/02 8 9

PANEL/BLOCK SYSTEMS STRUCTURAL/ MOULDED SYSTEMS Polyurethane (PUR) and polyisocyanurate (PIR) quickly supersede traditional building insulation methods mainly due to their superior insulating properties. All kinds of industrial halls, warehouses, sports facilities as well as private houses are entirely or partly built with composite panels in sheet metal and soft linings. We offer both PUR and PIR systems but we also promote a modern solution with a polyisocyanurate foam core, which is characterised by superior fire resistance as well as temperature and mechanical strength parameters. Regardless of the production technology (continuous, periodic or block type), we offer a full range of products: systems with different densities, systems based on various foaming agents, mixing ratios and flammability classes. Izopianol 10/40 SP Izopianol 08/30 SP PANEL PRODUCTS: Izopianol 10/40 SP/PIR Izopianol 08/30 SP/PIR In our immediate surroundings, there are a lot of elements or items made of polyurethane. These are different types of insulation, but also parts of building structures, finishing elements, hives, poultry houses inlets, wobblers, etc. STRUCTURAL/MOULDED PRODUCTS: Izopianol 30/60 Izopianol 20/110 IS Izopianol 50/110 IS Izopianol 35/130 IS Izopianol 30/45 IS Izopianol 20/30 CP Izopianol 20/75 IS 10 11