DATA SHEET. KGL4205 10-Gbps D-Flip Flop IC 0.2µm Gate Length GaAs MESFET Technology

Similar documents
INTEGRATED CIRCUITS. 74LVC08A Quad 2-input AND gate. Product specification IC24 Data Handbook Jun 30

SN54HC157, SN74HC157 QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS

SN28838 PAL-COLOR SUBCARRIER GENERATOR

Spread-Spectrum Crystal Multiplier DS1080L. Features

INTEGRATED CIRCUITS. 74F153 Dual 4-line to 1-line multiplexer. Product specification 1996 Jan 05 IC15 Data Handbook

SN54HC191, SN74HC191 4-BIT SYNCHRONOUS UP/DOWN BINARY COUNTERS

4-bit binary full adder with fast carry CIN + (A1 + B1) + 2(A2 + B2) + 4(A3 + B3) + 8(A4 + B4) = = S1 + 2S2 + 4S3 + 8S4 + 16COUT

PS25202 EPIC Ultra High Impedance ECG Sensor Advance Information

INTEGRATED CIRCUITS. 74F74 Dual D-type flip-flop. Product specification Supercedes data of 1990 Oct 23 IC15 Data Handbook.

HEF4011B. 1. General description. 2. Features and benefits. 3. Ordering information. 4. Functional diagram. Quad 2-input NAND gate

3-to-8 line decoder, demultiplexer with address latches

1-of-4 decoder/demultiplexer

HEF4021B. 1. General description. 2. Features and benefits. 3. Ordering information. 8-bit static shift register

74F257A Quad 2-line to 1-line selector/multiplexer, non-inverting (3-State)

EMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS 16400(LED TYPES) EXAMINED BY : FILE NO. CAS ISSUE : JAN.19,2000 TOTAL PAGE : 7 APPROVED BY:

DSC1001. Low-Power Precision CMOS Oscillator 1.8~3.3V. Features. General Description. Benefits. Block Diagram

LC898300XA. Functions Automatic adjustment to the individual resonance frequency Automatic brake function Initial drive frequency adjustment function

EMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS (LED TYPES) EXAMINED BY : FILE NO. CAS ISSUE : DEC.01,1999 TOTAL PAGE : 7 APPROVED BY:

74HC377; 74HCT General description. 2. Features and benefits. 3. Ordering information

1 TO 4 CLOCK BUFFER ICS551. Description. Features. Block Diagram DATASHEET

The 74LVC1G11 provides a single 3-input AND gate.

Features. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND

V CC TOP VIEW. f SSO = 20MHz to 134MHz (DITHERED)

TSL INTEGRATED OPTO SENSOR

BIPOLAR ANALOG INTEGRATED CIRCUIT

74F168*, 74F169 4-bit up/down binary synchronous counter

SN54F157A, SN74F157A QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS

EMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS 16290(LED TYPES) EXAMINED BY : FILE NO. CAS ISSUE : JUL.03,2001 TOTAL PAGE : 7

TSL250, TSL251, TLS252 LIGHT-TO-VOLTAGE OPTICAL SENSORS

74HC175; 74HCT175. Quad D-type flip-flop with reset; positive-edge trigger

BIPOLAR ANALOG INTEGRATED CIRCUIT

Product Datasheet P MHz RF Powerharvester Receiver

INTEGRATED CIRCUITS. NE558 Quad timer. Product data Supersedes data of 2001 Aug Feb 14

Quad 2-input NAND Schmitt trigger

MM54C150 MM74C Line to 1-Line Multiplexer

74HC02; 74HCT General description. 2. Features and benefits. Ordering information. Quad 2-input NOR gate

TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TAR5SB15~TAR5SB50

3-input EXCLUSIVE-OR gate. The 74LVC1G386 provides a 3-input EXCLUSIVE-OR function.

Features. Dimensions

Spread Spectrum Clock Generator AK8126A

14-stage ripple-carry binary counter/divider and oscillator

MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer

10 ma LED driver in SOT457

AAT3520/2/4 MicroPower Microprocessor Reset Circuit

MC14008B. 4-Bit Full Adder

Low-Jitter I 2 C/SPI Programmable Dual CMOS Oscillator

8-bit binary counter with output register; 3-state

23-26GHz Reflective SP4T Switch. GaAs Monolithic Microwave IC in SMD leadless package

Features. Dimensions

BAT54 series SOT23 Schottky barrier diodes Rev. 5 5 October 2012 Product data sheet 1. Product profile 1.1 General description

TPN4R712MD TPN4R712MD. 1. Applications. 2. Features. 3. Packaging and Internal Circuit Rev.4.0. Silicon P-Channel MOS (U-MOS )

5485 DM5485 DM Bit Magnitude Comparators

Features. Dimensions

Description. Table 1. Device summary. Order code Temperature range Package Packaging Marking

High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch)

SN54ALS191A, SN74ALS191A SYNCHRONOUS 4-BIT UP/DOWN BINARY COUNTERS

Planar PIN diode in a SOD323 very small plastic SMD package.

S-57M1 Series HIGH-SPEED BIPOLAR HALL EFFECT LATCH. Features. Applications. Package.

DG2302. High-Speed, Low r ON, SPST Analog Switch. Vishay Siliconix. (1-Bit Bus Switch with Level-Shifter) RoHS* COMPLIANT DESCRIPTION FEATURES

MM74HCT373 MM74HCT374 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop

SSM3K335R SSM3K335R. 1. Applications. 2. Features. 3. Packaging and Pin Configuration Rev.3.0. Silicon N-Channel MOS (U-MOS -H)

SiGe:C Low Noise High Linearity Amplifier

74HC574; 74HCT574. Octal D-type flip-flop; positive edge-trigger; 3-state

ICS SPREAD SPECTRUM CLOCK SYNTHESIZER. Description. Features. Block Diagram DATASHEET

TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process) 2SA1020

HEF4013B. 1. General description. 2. Features and benefits. 3. Applications. 4. Ordering information. Dual D-type flip-flop

TSM2N7002K 60V N-Channel MOSFET

ICS514 LOCO PLL CLOCK GENERATOR. Description. Features. Block Diagram DATASHEET

SKY LF: GHz Two-Way, 0 Degrees Power Divider

Low-power configurable multiple function gate

ICS SYSTEM PERIPHERAL CLOCK SOURCE. Description. Features. Block Diagram DATASHEET

TRIPLE PLL FIELD PROG. SPREAD SPECTRUM CLOCK SYNTHESIZER. Features

CAN bus ESD protection diode

Obsolete Product(s) - Obsolete Product(s)

SC728/SC729. 2A Low Vin, Very Low Ron Load Switch. POWER MANAGEMENT Features. Description. Applications. Typical Application Circuit SC728 / SC729

DISCRETE SEMICONDUCTORS DATA SHEET. BT151 series C Thyristors

PC2004A-L (20x4) Character LCD Display

Old Company Name in Catalogs and Other Documents

DISCRETE SEMICONDUCTORS DATA SHEET M3D848. CGD MHz, 20 db gain power doubler amplifier. Product specification 2002 Oct 08

74HC393; 74HCT393. Dual 4-bit binary ripple counter

74HC4040; 74HCT stage binary ripple counter

SPREAD SPECTRUM CLOCK GENERATOR. Features

MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer

TLP281,TLP281-4 TLP281,TLP281-4 PROGRAMMABLE CONTROLLERS AC/DC-INPUT MODULE PC CARD MODEM(PCMCIA) Pin Configuration (top view)

ORDERING INFORMATION. TOP-SIDE MARKING PDIP N Tube SN74LS07N SN74LS07N PACKAGE. SOIC D Tape and reel SN74LS07DR

74HCU General description. 2. Features and benefits. 3. Ordering information. Hex unbuffered inverter

DISCRETE SEMICONDUCTORS DATA SHEET. BZX384 series Voltage regulator diodes. Product data sheet Supersedes data of 2003 Apr 01.

NPN wideband transistor in a SOT89 plastic package.

it4036f 120-ps Wideband Phase Delay Description Features Device Diagram Timing Diagram

Reflective Optical Sensor with Transistor Output

DM74LS191 Synchronous 4-Bit Up/Down Counter with Mode Control

74HC165; 74HCT bit parallel-in/serial out shift register

CD4008BM CD4008BC 4-Bit Full Adder

Schottky barrier quadruple diode

HCC/HCF4032B HCC/HCF4038B

DISCRETE SEMICONDUCTORS DATA SHEET. dbook, halfpage M3D088. BB201 Low-voltage variable capacitance double diode. Product specification 2001 Oct 12

. HIGH SPEED .LOW POWER DISSIPATION .COMPATIBLE WITH TTL OUTPUTS M54HCT27 M74HCT27 TRIPLE 3-INPUT NOR GATE. tpd = 9 ns (TYP.

PESDxU1UT series. 1. Product profile. Ultra low capacitance ESD protection diode in SOT23 package. 1.1 General description. 1.

HCF4001B QUAD 2-INPUT NOR GATE

54157 DM54157 DM74157 Quad 2-Line to 1-Line Data Selectors Multiplexers

Transcription:

DATA SHEET O K I G a A s P R O D U C T S KGL4205 10-Gbps D-Flip Flop IC 0.2µm Gate Length GaAs MESFET Technology February 2000

Oki Semiconductor

KGL4205 10-Gbps GaAs D-Flip Flop IC INTRODUCTION Oki Semiconductor s KGL4205 is a 10-Gbps D-Flip Flop IC designed for ultra high-speed digital communications systems. The KGL4205 uses 0.2-µm gate length GaAs MESFETs and Oki s unique MCFF ( Memory Cell type Flip Flop ) technology to achieve operations of 10-GHz or more. The KGL4205 is available as a 24-pin ceramic packaged device. Due to the KGL4205 s high sensitivity, capacitive coupling is recommended for IC s DA and CK connections. FEATURES High-speed operation: 10-Gbps data rate (typ) Low-power dissipation: 340 mw (typ.) using 2-V power-supply 0.2-µm gate length GaAs MESFET process MCFF ( Memory Cell type Flip Flop ) technology 24-pin ceramic package APPLICATION High-speed optical communication systems: 10 Gbps High-speed test equipment Oki Semiconductor 1

KGL4205 BLOCK DIAGRAM DA DR 50 Ω D D-Flip Flop (MCFF) Q Q D C C Q CK CR 50 Ω QN DA Data Input Terminals CK Clock Input Terminals DR, CR Output Reference Voltage Terminals Q, QN Complimentary Data Outputs VDD Power Supply of Internal Circuit ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings Parameter Symbol Min. Max. Units Supply Voltage, V B -0.3 2.3 V Data, Clock Input Voltage V DI, V CI -0.3 1.5 V Temperature at Package Base Under Bias Ts -45 100 C Storage Temperature Tst -45 125 C Exceeding these maximum ratings could cause immediate damage or lead to permanent deterioration of the device. Electrical Characteristics = 2 V ± 0.1 V, Ts = 0 C to 70 C Parameter Symbol Min. Typ. Max. Units Operating Data Bit Rate Range DAR 10 Gbps Power Dissipation PW 0.34 0.38 W High-Level Data, Clock Input Voltage VIH 0.6 0.9 1.25 V Low-Level Data, Clock Input Voltage VIL -0.1 0.1 0.3 V High-Level Output Voltage ( Q, QN ) VOH 0.65 0.9 1.2 V Low-Level Output Voltage ( Q, QN ) VOL 0 0.1 0.2 V Output ( Q, QN ) Rise time and Fall time TRF 30 40 ps Phase Margin @ 10 Gbps (2 23-1 PRBS) TOM 240 degree 2 Oki Semiconductor

KGL4205 PACKAGE DIMENSIONS (Units: mm) 11.8 13.8 ± ±0.3 9.61 SQ 7.4 SQ 0.50 0.50.064 ±0.2 0.20 24 19 1 18 Top View 6 13 7 12 1.27 0.30 0.125 6.35 Dimension in mm. Pin Configuration Pin No. Description Pin No. Description Pin No. Description Pin No. Description 1 GND 7 GND 13 GND 19 CR 2 Q 8 GND 14 DA 20 VDD 3 GND 9 GND 15 GND 21 VDD 4 GND 10 GND 16 GND 22 GND 5 QN 11 DR 17 CK 23 VDD 6 GND 12 DR 18 GND 24 GND Oki Semiconductor 3

KGL4205 Notes: 4 Oki Semiconductor

The information contained herein can change without notice owing to product and/or technical improvements. Please make sure before using the product that the information you are referring to is up-to-date. The outline of action and examples of application circuits described herein have been chosen as an explanation of the standard action and performance of the product. When you actually plan to use the product, please ensure that the outside conditions are reflected in the actual circuit and assembly designs. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited to, exposure to parameters outside the specified maximum ratings or operation outside the specified operating range. Neither indemnity against nor license of a third party's industrial and intellectual property right,etc.is granted by us in connection with the use of product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a third party's right which may result from the use thereof. When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges, including but not limited to operating voltage, power dissipation, and operating temperature. The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g.,office automation, communication equipment, measurement equipment, consumer electronics, etc.).these products are not authorized for use in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application where the failure of such system or application may result in the loss or damage of property or death or injury to humans. Such applications include, but are not limited to: traffic control, automotive, safety, aerospace, nuclear power control, and medical, including life support and maintenance. Certain parts in this document may need governmental approval before they can be exported to certain countries. The purchaser assumes the responsibility of determining the legality of export of these parts and will take appropriate and necessary steps, at their own expense, for export to another country. Copyright 2000 Oki Semiconductor Oki Semiconductor reserves the right to make changes in specifications at anytime and without notice. This information furnished by Oki Semiconductor in this publication is believed to be accurate and reliable. However, no responsibility is assumed by Oki Semiconductor for its use; nor for any infringements of patents or other rights of third parties resulting from its use. No license is granted under any patents or patent rights of Oki. Oki Semiconductor

Oki REGIONAL SALES OFFICES Northwest Area 785 N. Mary Avenue Sunnyvale, CA 94086 Tel: 408/720-8940 Fax: 408/720-8965 North Central Area 300 Park Blvd. Suite 365 Itasca, IL 60143 Tel: 630/250-1313 Fax: 630/250-1414 Northeast Area 138 River Road Shattuck Office Center Andover, MA 01810 Tel: 978/688-8687 Fax: 978/688-8896 Southwest Area 2302 Martin Street Suite 250 Irvine, CA 92715 Tel: 949/752-1843 Fax: 949/752-2423 Southeast Area 1590 Adamson Parkway Suite 220 Morrow, GA 30260 Tel: 770/960-9660 Fax: 770/960-9682 Oki Web Site: http://www.okisemi.com For Oki Literature: Call toll free 1-800-OKI-6388 (6 a.m. to 5 p.m. Pacific Time) Oki Stock No: 320184-000 Corporate Headquarters 785 N. Mary Avenue Sunnyvale, CA 94086-2909 Tel: 408/720-1900 Fax: 408/720-1918