Helping Our Customers Achieve Superior Results Offshore Handling Equipment
Offshore Handling Equipment Product Jack-Up Semi / Drillship Derrick Top Drive / Dolly Retract Drawworks Torque Wrench Drilling Controls Pipe Racking Horizontal Pipe Handling Standbuilding Knuckleboom Cranes Handling Equipment Drill Floor Manipulator Hydraulic Power Units Tailing Arm / Casing Arm Conductor Tensioning Tubular Handling Systems Riser Handling Systems Splashzone Guidance Subsea Handling Systems BOP Handling Systems STANDBUILDING ARM During testing at one of our Houston facilities.
DerrickS Canrig has a standard range of designs for static and dynamic applications. The company has provided designs in metric, imperial and Chinese standards. CANRIG designs include: Guide Rails Water Table Crown Block Fast-Line Routing Dead-Line Routing Gin Pole Tong Counterweight Tugger/Manrider Routing Hydraulics Electrics Pneumatics Service Lines Canrig supplies derricks to ABS, DNV or any other classification requirement. Canrig s racking module is a patented design. The racking module is complete with bridgecrane, mechanized racking board, control cab and a dedicated power unit.
Canrig is able to supply complete handling packages for jack-up drilling rigs. The company has added a range of handling products to their already substantial product portfolio. TheSE products include: Derricks and Crowns Pipe Racking Systems and Boards Standbuilding Systems Horizontal Pipe Handling (pipe deck to drill floor) Top Drives / Retractable Dollies Torque Wrenches Drawworks Casing Stabbing Boards Casing Stabilizing Arms Lower Racking Arms Drill Floor Manipulator Arms Drill Floor Tools Hydraulic Power Units
Canrig can supply simple mechanized systems or fully automated, hands-free systems. The two images show the diversity of our systems from a monotower system to our simple, lightweight system (pictured right) which is a TRUE ONLINE- OFFLINE SYSTEM representing major commercial advantages as well as increased efficiency in casing operations. CANRIG also supplies a range of Cellar Deck Solutions: BOP Handling Cantilever Skidding Drill Floor Skidding Conductor Tensioning
Drill Floor Manipulator Arm (DFMA) Canrig s DFMA is used for a variety of drill floor duties ranging from racking of tubular to tailing of casing and risers. The DFMA can be underslung as shown or floor mounted. It comes with a range of heads for handling collars or risers with buoyancy modules. Tailing Arms and Stabilizing Arm Canrig has a range of tailing arms for mounting in the derrick which are used to stabilize tubulars at the well center. Tubular handling Canrig offers a range of products including gantry cranes, jib arm handling, catwalk machines, conveyors, grab lift and magnetic lift. Riser Management - Horizontal Canrig has a complete Riser Management System that provides the positioning of equipment from the storage rack to the well center. Riser Gantry Cranes 2 Cart Handling Riser Catwalk (as shown) Tailing Arm Riser Spider Riser Storage Frames Conductor Tensioning Unit (CTU) Canrig s conductor tensioning units are built to suit precise requirements of the jack-up. Riser Management - Vertical Canrig provides a complete vertical riser handling system including gantry crane, racking boards and elevating frame. Hydraulic Power Units Canrig provides a range of power units from dedicated units (dedicated to a particular piece of equipment) to centralized power units (4 x 200HP). Power units can include acoustic enclosure and air cooling systems.
BOP Handling on Drillships and Semisubmersibles Another way to handle subsea equipment is by cart and overhead cranes. Canrig can supply cart and crane systems, which includes bulkhead guidance, integrated splashzone guidance, insert trolley for trees, auxiliary hoist on crane (for service work) and a retractable test stump frame. Canrig offers a consultancy service whereby we specify the most cost-effective system within the physical constraints of the rig and the client s budget. Subsea Handling Systems (BOP, Xmas trees) Subsea handling equipment needs to be simple, robust and reliable. Canrig has a range of equipment which is grouped together to provide the best systems. TheSE products include: BOP Transporter Skidding Systems BOP Cart BOP Chain Hoists BOP Service Crane Bulkhead Guidance Frames Baseplate Trolley Retractable Test Stumps Tree Trolley Dedicated Power Unit The most common handling system on a semisubmersible is the BOP transporter, with sideways skidding and baseplate/tree trolley. BOP Handling on a Jack-up or Land The BOP on a jack-up is lighter and the handling is often simpler. Canrig provides a range of chain hoists, elevators and transporter cranes. This system is able to test the BOP in full assembly. Splashzone guidance Canrig provides a robust splashzone guidance unit which is telescopic and mounted on the underside of the moonpool. This system restrains the BOP while in the splashzone.
General Information www.canrig.com Sales Information info@canrig.com Canrig Support (866) 433-4345 Telephone (281) 774-5600 Fax (281) 774-5610 Postal Address Corporate Headquarters 8223 Willow Place Drive South Houston, TX 77070 USA 1404