Forage harvester
Fendt Katana 2 3 The range Fendt forage harvester With the completion of the harvesting machine line, the Fendt brand has become a long-liner for key machines. Fendt has been working on the expansion of the forage harvester range in giant steps and now offers two models with up to 850 hp. Fendt has also further developed the technology found in the forage harvesters: automatic steering system and documentation have found their way into the range. Katana 65 653 hp 480 kw Katana 85 675 hp 850 kw Maximum power to ECE R120
4 The power of precision Fendt engineers have trimmed the main chopping units for maximum performance from the very beginning. The Fendt Katana has already proven its power and performance, amongst other things, through the biggest cutterhead currently available on the market. In addition to power, the Katana also stands for precision. Fendt sets standards with the V-Cracker, which guarantees outstanding chopping quality through its ingenious design. The overall operating concept is designed for precise control and adjustment. Newly introduced technologies, such as the automated steering, guarantee precise work and therefore the highest area coverage with up to 850 hp. X5 cab with extra comfort Maximum output in tonnes per hour Highest quality chopped material Maximum profitability through low fuel consumption P Maximum operational reliability Ideal ride comfort
Visio5 cab 6 Generously dimensioned and ergonomically designed The Visio5 cab provides extra ergonomics and operating comfort, extra visibility and illumination and, most of all, extra space. Operator ergonomics have been exceptionally well implemented in the generously sized cab from the legroom to the perfectly designed multi-function joystick. The large glazed areas give operators an outstanding view to the header and the entire discharge area of the spout.
Visio5 cab 9 Best visibility day or night Ideal visibility See even more view to the header and the spout both sides, wide steps and integral lighting Giant glazed areas and unobstructed visibility The strongly curved front window has A-pillars that have been set further towards the rear, so the entire header is in view. Best overview, even towards the rear To provide optimum visibility towards the rear, and therefore perfect all-round vision, the engine has been mounted longitudinally and the body of the machine has been kept extremely low at the rear. cab entrance Giant glazed areas and unobstructed visibility The Visio5 cab has been designed for optimum visibility and offers perfect ergonomics and easy-to-use controls in the workplace. Thanks to the special shape of the roof line, operators always have the chute flap in view. Automatic climate control and heating guarantee a pleasant working environment. Extensive lighting package is easy to operate Headlights main/dipped beam, 1 pair of auxiliary headlights, 3 pairs of work lights in the roof, 1 pair of side finders for illuminating the header, 1 pair of work lights at the rear and 2 work lights for the spout. Cool drinks are always on board A large cool box for refreshments is located under the comfortable instructor seat.
Visio5 cab Precise control The Varioterminal Varioterminal well-structured The Varioterminal with colour display, touchscreen (operation using rotary control and keys is also possible) is easy to operate and guarantees detailed machine monitoring, to keep the machine operating reliably. high ride comfort thanks to climate control and air-suspended seat conditioning and comfortable seat Header raise/lower and automated functions Spout and flap With the touch of a finger The toggle switches provide easy control of functions such as folding the support wheels for the maize header and pick-up up/down, tilting the header, raising/lowering the spout. Membrane keypad within easy reach The membrane keypad is located directly in the armrest and is used to operate the hand brake, field/road driving modes and Eco/Power mode, activating the cutting unit, the engine speed, header on/off, position of the spout, additional silage additive and rear axle suspension on/off. control console on the right-hand armrest machine adjustment using either the touchscreen or the operating elements Feed on/off and reversing extremely ergonomic through the tilted position and hand rest, has two 4-way buttons for controlling the header and spout One individually assignable key Automatic rotation of spout the cutting height control, maximum output control control and VarioDoc, increase profitability Handy operating element on the right-hand armrest The practical right armrest, which is very popular with Fendt tractor drivers, has been adopted and adapted to the forage harvester. It is not only a comfortable armrest, but also an ergonomic control unit with toggle switches and membrane keys for auxiliary functions. Varioterminal screen on the road When driving on the road, the ground speed and engine speed, the fill levels for diesel and AdBlue, as well as the temperature, support wheel function and fuel consumption can be monitored in the terminal. Varioterminal screen in the field Information about the utilisation of the forage harvester, cutting length, header and feed roller speed as well as the preselected working and lifting heights for the header are clearly displayed here. -
Fendt Variotronic Precision in operation Precise work It is very easy to set the boundary for a particular area and the wayline offset with the Varioterminal. The automatic maximum output control automatically controls the forward ground speed of the Fendt Katana dependent on the crop density. You can achieve maximum area coverage through precision work with the VarioGuide automated steering, for example, using the AB mode.
Uniform crop flow and best chopping results Quality counts The chopped material flows efficiently and with a high throughput. From the header, to the unique swinging frame for the feeding units, to the six feed rollers, to the large closed cutterhead, to the powerful discharge system, the Fendt Katana has been designed for high output. The refined technology of the chopping units also guarantees highest quality of the chopped material.
Uniform crop flow and best chopping results A perfect start for optimum crop flow Perfect on the ground Intelligent coupling with the swinging frame Six feed rollers for effective crop feed For emergencies with automatic cutting height control Swinging frame swung out Swinging frame in middle position Swinging frame swung out The header is coupled to an innovative swinging frame. It actively swings on three rollers and a cylinder above the frame and adjusts itself to the position of the header. The pivot point in this ingenious system lies in the centre of the feed channel; when the frame swings, the cross-section remains almost the same size and the crop flows uniformly to the feed rollers. with active ground pressure control uniform feed, even when the header is tilted foreign objects Three-metre wide pick-up with gauge wheels that fold up hydraulically. The maize header is available with either ten or twelve rows. For on-road driving, the header folds up hydraulically, so it can be brought into transport position quickly. Six feed rollers for high compression The six hydraulic driven feed rollers guide the crop uniformly to the cutterhead. A spring assembly creates high compression for a precise cut. The cutting length is infinitely adjustable from 4 to 42 mm, which allows an optimum cutting length to be set, for example, for fodder or use in biogas facilities.
Uniform crop flow and best chopping results Big, ingenious and flexible The biggest cutterhead More surface area for thorough kernel processing Optimum adjustment to crop +125% 1,350 mm 600 mm diameter High-capacity discharge blower Sized for quality The cutterhead, with a 720-mm diameter, has a very high cutting frequency due to its enormous size. This guarantees gentle chopping, even with large quantities of material, and guarantees an optimal cutting frequency. Efficient V-Cracker On the V-Cracker, the cracking length is more than twice as long. Conventional design with simple cracking length V-Cracker guarantees thorough kernel processing Fendt has chosen an ingenious design for the V-Cracker. Through the use of rollers fitted with corrugated discs, the cracking length of the cracker is more than twice as long as on conventional rollers. Since the discs mesh, the speeds on the inside and outside of the disc are different. This results in highly efficient and thorough cracking of the maize kernels. If necessary, the cracker discs can be replaced individually. constant sharpness, optimal cut and long maintenance intervals ing system is operated via the Varioterminal meshing rollers and bigger surface area Six feed rollers Large cutterhead Rotating V-Cracker When switching between crops, for example from maize to grass and vice versa, the V-Cracker can remain in the machine for short periods. The V-Cracker can be quickly rotated back behind the discharge blower electrohydraulically. To prevent bearing wear caused by shock loads and vibrations, the belts continue to drive the V-Cracker without function. This rotating procedure can be preset in the Varioterminal and then conveniently triggered per pushbutton located in the maintenance area, when required. The grass chute is then automatically brought into position. Removing the V-Cracker is also very easy, since the maintenance area has plenty of space for accessibility. for fast changes from grass to maize and back again power requirement and therefore lower fuel consumption
Discharge Everything must go Save power Flexible spout Monitoring and safety Using the multi-function lever, the spout can be quickly rotated to the other side of the machine with the touch of a button. Even with an unloading height of up to six metres, operators have the chute flap in full view. For optimized trailer filling, the spout can be extended, when using wide headers. The discharge blower is designed as an open rotor with upright v-shaped elements. The blower's clearance to the back wall and the discharge opening can be adjusted. fuel-efficient to six metres discharge area of the trailer is available for operators of the forage harvester as standard discharge system via multi-function joystick
Driveline and vehicle design 22 23 Powerful and highly efficient offer power, durability and reliability. With the SCR technology for exhaust after-treatment, the Fendt Katana 65 achieves high fuel- efficiency while at the same time maximising performance. does not have SCR, but already complies with the newest emissions standard. In operations that mode guarantees even lower fuel consumption.
Driveline and vehicle design 24 Powerful engine Drive ahead economically The new power of the Fendt Katana 85 maximum output of up to 850 hp for the Katana 85 friendly SCR technology with the Katana 65 The 16-litre 8-cylinder Mercedes-Benz engine is efficient, powerful and reliable. It is equipped with SCR technology for maximum fuel-efficiency. Exhaust is after-treated with AdBlue, a 32.5 percent solution of urea, which converts nitrous oxides NOx into non-toxic nitrogen and water. The consumption of AdBlue, the standard urea-water solution used by commercial vehicles, lies at about four percent of the diesel consumption. This can vary depending on the operation. AdBlue is available at filling stations or through AGCO Parts. The new MTU engine delivers precisely the performance characteristics that powerful forage harvester operations demand. The 21- litre V12 engine delivers a whopping 850 hp and already complies with the TIER4 Final emissions standard. The engine does not need any additional resources, such as AdBlue. supply for the Katana 65: Katana 85: water or active dust extraction
Driveline and vehicle design 26 A ground drive that is always just right Save some power V-Cracker driveline Switching between Eco mode and Power mode takes place through a two-speed gearshift assembly in the angular gearbox. During light operations in grass, the engine operates at a low speed in Eco mode. The speed of the chopping units, however, is still maintained at the required speed in the optimum range. Fuel consumption [l/hr] Fuel consumption [ l/t FM ] The savings that the Eco mode provides over the Power mode in terms of fuel consumption l/hr and engine speed become obvious in the DLG test. 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 80 70 60 50 40 30 20 10 Eco mode Eco mode 11.7% 10.3% Power mode 1570 rpm 1963 rpm Fuel consumption [ l/t FM ] AdBlue consumption [ l/t FM ] Comparison Eco and Power mode in terms of fuel consumption l/hr and output t/hr Power mode optimum control of the oil volume on the steering and drive axles for header and feed rollers units operation in grass The cutterhead and the discharge blower are driven by a belt drive. 0 55.8 t/hr FM Fuel consumption [ l/hr ] AdBlue consumption [ l/h ] 57.0 t/hr FM
Driveline and vehicle design 29 Comfort makes you faster Top manoeuvrability 40 km/h with full suspension Move ahead on all paths a transport speed of 40 km/h for minimising shock loads and for maximum ride comfort in the cab 6330 mm (Katana 65) Compact design and extremely manoeuvrable The headers are mounted very close to the vehicle, which reduces the load on the front axle. That minimises soil compaction. The optimised frame design in combination with a large steering angle on the rear axle, make the forage harvester exceptionally manoeuvrable. front wheel slip for best traction standard specification The rear axle has suspension to absorb shock loads in the field and on the road. That protects both the operator and the machine.
The sum of the technical solutions creates the technological lead Cutting-edge technology 31 Innovative technology for the best efficiency and performance are packed inside the Fendt Katana 65. 21 29 23 32 20 1. Swinging frame for coupling the header 2. Six feed rollers 3. Spring assembly for feed rollers 4. Hydraulic drive for feed rollers 5. Cutterhead (720 mm diameter) 6. Cutterhead drive 7. Innovative V-Cracker 8. Drive V-Cracker 9. Blower 10. Drive discharge blower 11. Drive dust extraction cooler 12. Main gearbox (Eco/Powermode) 13. Oil pump for ground drive 14. Oil motor for 4WD 15. Wheel motor for drive axle 16. Oil pump for header/feed roller drive 17. V8-engine with SCR technology (Katana 65) 18. Hydraulic rear axle suspension 19. Chute flap with camera and lighting 20. Support for spout with rear lighting 21. Spout (up to 6-metre unloading height) 22. Hydraulic swivel/fold device 23. Clutter-free Visio5 cab 24. Air-suspended driver seat 25. Varioterminal with touch control 26. Ergonomic armrest with membrane keypad 27. Multi-function lever with integral hand rest 28. Multi-adjustable steering column 29. Monitor for optional camera on chute flap and rear area 30. Headlights and turning signal indicators 31. Auxiliary headlights and work lights 32. Wide-angle mirror 30 1 2 25 27 28 4 3 26 5 24 8 6 7 22 9 10 15 11 12 14 16 13 17 18 19
Maintenance 32 33 Service Very easy maintenance Always in operation Top service at your side Spare parts are always available
Technical Specifications The Fendt overall profitability 34 Fendt Katana 65 Katana 85 Engine Manufacturer Mercedes Benz OM 502 LA MTU BR 1600 Type / emissions standard 3B (Tier IV interim) 4 (Tier IV final) Engine power (KW/hp)(ECE R 120) 480 / 653 625 / 850 No. of cylinders V 8 V 12 Cubic capacity (l) 16 21 Exhaust gas after-treatment SCR Fuel tank (l) 1100 1100 diesel/250 water or 1350 diesel (optional) AdBlue tank (l) 250 Fuel consumption measurement Standard Standard Ground drive Type hydrostatic hydrostatic 4WD hydrostatic, standard hydrostatic, standard Speed field 0-20 km/h 0-20 km/h Speed road 0-40 km/h 0-40 km/h Steering axle hydraulic suspension hydraulic suspension Feed rollers Type 6 6 Drive hydrostatic hydrostatic Cutting length adjustment infinitely adjustable from cab infinitely adjustable from cab Cutterhead Diameter (mm) 720 720 Width (mm) 800 800 Number of knives 2x 14 (7) 2x 14 (7) Speed (rpm) 1150 1150 Chopping length 28 knives (mm) 4-21 4-21 Chopping length 14 knives (mm) 8-42 8-42 Kernel processing Model V-Cracker V-Cracker Type wedge discs / double roller wedge discs / double roller Blower Design open rotor with upright v-shaped elements open rotor with upright v-shaped elements Rotor diameter (mm) 550 550 Rotor width (mm) 644 644 Spout Swing angle (degrees) 210 210 Unloading height (m) 6 6 Weights and dimensions Weight without header (kg) 14400 17850 Length incl. discharge (mm) 8230 8230 Transport width with standard tyres 3000 3190 (mm) Transport height (mm) 3850 3850 Invest right and keep on saving With the Fendt Katana you get true cutting-edge ity, the Fendt forage harvester needs a bit more: competent consultation and support through a highly motivated Service team and a reliable and fast spare parts service. Fendt provides all of this, which secures the high operational security and availability of your machine. Fendt overall profitability operations Tyres Drive axle standard 650 /75 R 32 710 /70 R 42 Option 710 /75 R 34 710 /70 R 38 800 /70 R 38 900 /60 R 38 800 /65 R 32 900 /60 R 32 Steering axle standard 500 /80 R 28 600 /70 R 34 Option 600 /65 R 28 600/60-30.5 710/50-30.5 620 /70 R 34 IF 620/75 R 30 710 /60 R 30 Headers Pick up (m) 3 3 Maize header 360 Plus (m) 6 Maize header 375 Plus (m) 7.5 7.5 Maize header 390 Plus (m) 9 9 Maize header 460 Plus (m) 6
Leaders drive Fendt www.fendt.com Sales agent: AGCO GmbH Fendt-Marketing 87616 Marktoberdorf, Deutschland Fax +49 (0) 8342 / 77-220 Fendt is a worldwide brand of AGCO. All data regarding delivery, appearance, performance, dimensions and weight, fuel consumption and running costs of the vehicles correspond with the latest information available at the time of going to press. Changes may be made before the time of purchase. Your Fendt dealer will be pleased to supply you with up-to-date information. Kat/2.0-EN/11-2013/5.0-E