Kantlister / Edge trims / Kantenschütze

Kantlister / Edge trims / Kantenschütze 33.306X 33.307A 33.409 / 33.401G 33.410X Grip range: 0,8-1,5 mm Insert: 15 x 0,3 mm steel Hardness: SH 75 Insert: 17,5 x 0,3 mm steel On cardboard coil Insert: 16 x 0,3 mm steel 33.401G (grey) Hardness: SH 75 Insert: 17,5 x 0,3 mm steel 33.422 33.310X 33.310SS 33.308A Edge trim: TPE flexible Hardness: SH 82 Insert: 25 x 0,48 mm steel 33.420X 10 Hardness: SH 75 33.419 33.411-75 Insert: 26 x 0,5 mm stainless steel Hardness: SH 75 On cardboard coil 33.411A 14 5,5 Hardness: SH 75 33.425 / 33.425G 33.418X 33.418RX Edge trim: PVC grey Grip range: 2,5-4 mm Insert: 29 x 0,48 mm steel Edge trim: PVC grey Min. order: 2.000 mtr. 33.427X Edge trim: PVC Grip range: 3-4 mm Insert: 35 x 0,48 mm steel 33.425G (grey) +bi Hardness: SH 75 / 75 White lips 1 +bi / 65 Insert: 31 x 0,5 mm stainless steel Transparent lips +bi Grip range: 1,5-4,5 mm Hardness: SH 75 / 75 Insert: 30 x 0,47 mm steel Yellow lips

33.094X 33.1153 / 33.1153G 33.428 / 33.428G 33.1154 +bi Hardness: SH 75 / 75 Insert: 30 x 0,47 mm steel Yellow lips 33.415 Grip range: 6-8 mm 33.1153G (grey) 33.1155 Grip range: 10-12 mm Insert: 36 x 0,5 mm steel 33.428G (grey) Grip range: 6-8 mm Hardness: SH 75 / 75 Insert: 30 x 0,47 mm steel White lips 33.1156 33.426 / 33.426G Edge trim: PVC Grip range: 5-7 mm Insert: 29 x 0,48 mm steel 33.432 33.434 Grip range: 15-16 mm Hardness: SH 85 On demand Grip range: 18-19 mm Hardness: SH 85 On demand 33.433F 33.435 Edge trim: PVC+bi Grip range: 4,5-7 mm / 65 Insert: 29 x 0,48 mm steel Grip range: 1-3 mm Hardness: SH 65 Hardness: SH 65 Insert: 30 mm wire 33.311 33.312 33.429 Grip range: 4-6 mm Insert: 36 x 0,5 mm steel Flame retardent EPDM Grip range: 3-5 mm Insert: 31 x 0,76 mm wire Edge trim: Silikone Insert: 18 x 0,76 mm wire Heat resistant 200 C Edge trim: Silikone Heat resistant 200 C 2 Edge trim: Silikone Grip range: 5-7 mm Insert: 39 x 0,76 mm wire Heat resistant 200 C

33.417 33.417A 33.424 Edge trim: TPE+bi Grip range: 1-4,5 mm Hardness: SH 87 / 65-70 Insert: No steel inserts 33.409ABS Edge trim: TPE+bi Grip range: 1-4,5 mm Hardness: SH 80 / 65-70 Insert: No steel inserts On demand 33.308ABS Edge trim: TPE+bi Grip range: 0,8-2,5 mm (1,5-3 mm) Hardness: SH 87 / 65-70 Insert: No steel inserts Edge trim: PVC + bi Grip range: 0,5-3 mm Hardness: SH 75 / 57 Insert: ABS Plastic No rust - easy cutting Edge trim: PVC + bi Hardness: SH 75 / 57 Insert: ABS plastic No rust - easy cutting 33.500 33.501 33.502 Insert: 16 x 0,3 mm steel Min. order: min. 4.000 mtr. Insert: 21 x 0,3 mm steel 33.503 33.504 33.505 Insert: 21 x 0,3 mm steel Flame retardent Din 5510-2 Insert: 33 x 0,5 mm steel Insert: 33 x 0,5 mm steel 3 Insert: 33 x 0,5 mm steel Min. roder: 4.000 mtr.

33.354 33.468X 33.468B 33.368 Hardness: SH78/57 / density 0,55 Insert: 16 x 0,3 mm steel Insert: 22 x 0,75 mm wire Insert: 22 mm wire 33.021 33.358A 33.358B 33.358C Grip range: 0,5-1,5 mm Insert: wire Min. order: 6.000 mtr. Grip range: 0,8-2 mm Insert: 25 mm wire (1-3 mm) Insert: 26 x 0,5 mm Unbroken Insert: 27 mm steel 33.370NBR 33.371X 33.369 33.469X Grip range: 0,8-2,5 mm Hardness: SH 65 Insert: 25 x 0,5 mm steel Edge trim: NBR co-ex Oil resistant (1-3 mm) 33.353 33.357 33.352 33.359X Hardness: SH 75 / 63 density 0,6-0,85 Grip range: 3-5 mm Insert: 33 mm steel Edge trim: PVC / sponge rubber Grip range: 5-7 mm / density 0,6 Insert: 31 x 0,5 mm 4 Grip range: 5-6 mm / density 0,6 Insert: 31 x 0,5 mm Grip range: 1,5-4 mm / density 0,6-0,85 Insert: 25 wire

33.365X 33.376 33.360 33.360R Edge trim: PVC+bi sponge rubber Hardness: SH75 / 63 / density 0,6-0,85 / density 0,75 Insert: 27 mm steel Insert: 27 x 0,76 mm wire 33.361 33.361B 33.362 33.362B Insert: 27 x 0,76 mm wire Hardness: SH 65 / density 0,55 33.025 33.377 33.463 33.378 / density 0,75 Grip range: 4-6 mm Hardness: SH78/57 density 0,55 33.379 33.380 33.355B 33.374 Grip range: 1,5-5 mm Grip range: 2,5-5 mm Insert: 29 mm wire 5 solid ballon Grip range: 3-5 mm unbroken Grip range: 1,5-4 mm Min. order: 2.500 mtr.

33.375 33.431A 33.373F 33.373 Grip range: 4-5 mm Hardness: SH70 / density 0,6-0,85 33.371E EMV - EMC - EMI Edge trim: Silicone light grey RAL7035 Hardness: Insert: SH 60 / 60 solid ballon 31 x 0,76 mm wire Heat resistent 200 C 33.403 33.404 Grip range: 0,8-3 mm Flame retardent Din 5510-2 Grip range: 0,8-3 mm 33.405 Electromagnetic compatibility 33.406 Insert: 20 x 0,76 mm wire Insert: 20 x 0,76 mm wire 33.407X 33.408X 33.395A Grip range: 2-3 mm Hardness: SH 65 Insert: 20 x 0,5 mm steel Grip range: 0,8-2,5 mm Insert: 22 x 0,75 mm wire / 57 density 0,55 Insert: 16 x 0,3 mm steel 33.395X 33.397F 33.397 33.396 Grip range: 2 mm / density 0,6 Insert: 26 x 0,75 mm wire Grip range: 2-3 mm Flame retardent Din 5510-2 6 Grip range: 2-3 mm density 0,6-0,85

33.444X 33.445 33.9779 33.372X Edge trim: PVC + sponge rubber Hardness: SH75/75/density 0,6-0,86 Red lips 33.398 Edge trim: TPE+bi Grip range: 1-4,5 mm Hardness: SH 80 / 65-70 Insert: Without steel On demand 33.339X (1-4 mm) 5 Insert: 25 x 0,5 mm steel 33.320 33.454X Edge trim: PVC + spongerubber Hardness: SH75 / 75 / density 0,6-0,85 Insert: 22 x 0,47 mm steel Edge trim: NBR co-ex Grip range: 2 mm Insert: 27 x 0,76 mm wire Oil-resistant Edge trim: PVC+bi/ sponge rubber Grip range: 2,5-4 mm / 65 33.321 33.450W 33.450NBR 33.322F Grip range: 2 mm / Density 0,55 Insert: 27 x 0,76 mm wire Hardness: SH70/density 0,6-0,85 33.322 Edge trim: CR co-ex Grip range: 1,5-4 mm Insert: 29 x 0,75 mm wire Conditional oil-resistant Edge trim: NBR co-ex Oil-resistant Grip range: 4-6 mm (3-6 mm) Insert: 34 x 0,5 mm steel 33.323 33.324CR 33.338 Flame retardent Din 5510-2 Hardness: SH70/density 0,6-0,85 7 Edge trim: CR co-ex Hardness: SH70 / density 0,6-0,85 Insert: 29 mm wire Conditional oil-resistant Insert: 29 x 0,76 mm wire Min. Order: 5.000 mtr.

33.335 33.020 33.022 33.326 Hardness: SH70/density 0,6-0,85 33.327 33.328 (1,5-4 mm) 33.457S 33.329 Grip range: 1,5-4 mm Hardness: SH70/density 0,6-0,85 Grip range: 6-8 mm Hardness: SH70 / density 0,6-0,85 Grip range: 1,5-2,5 mm Grip range: 5-6 mm 33.329F 33.453X 33.330 33.331 Flame retardent Din 5510-2 33.332 Edge trim: PVC + sponge rubber Hardness: SH75/75 density 0,6-0,85 33.024 33.457 33.457ST Edge trim: PVC + sponge rubber Grip range: 6-8 mm Hardness: SH75/75 density 0,6-0,85 Insert: 30 x 0,47 mm steel White lips Grip range: 4-6 mm Hardness: SH70 / density 0,65 Insert: 32 x 0,5 mm steel unbroken Min. order: 4.000 mtr (2-5 mm) 8 Grip range: 5-6 mm / density 0,6 Insert: 32 x 0,6 mm steel unbroken Grip range: 5-6 mm Insert: 31 x 0,76 mm wire

33.457D 33.470 33.023 33.449 Grip range: 5-9 mm Insert: 36 x 0,5 mm steel Grip range: 1,5-4 mm (2-5 mm) Hardness: SH78/57 / density 0,55 33.333 33.336 33.337 33.452X 33.452T 33.451X 33.451E 33.451CR / 65 density 0,65-0,75 Insert: 29 x 0,48 mm / 57 density 0,6 33.447 33.452R 30.12116 33.464 Edge trim: CR co-ex Conditional oil-resistant 10 Grip range: 2,5-5 mm / 65 density 0,65-0,75 Insert: 29 x 0,48 mm stainless steel 9-0,85 Insert: 29 mm wire Insert: 31 x 0,75 mm wire

33.456 33.334 33.458X 33.465X 21,5 13,5 4,7 Grip range: 5-6 mm Insert: 30 x 0,6 mm steel 33.459 33.459P - 0,85 Insert: 33 mm steel 33.473 33.471 Edge trim: PVC solid lip Hardness: SH 57 Insert: 24 x 0,5 mm steel unbroken 33.472 33.460-6+6A / 33.460-4 / 33.460-2 33.460-2C Grip range: 3-5 mm solid lip Insert: 29 x 0,76 mm wire 33.475 Insert: 29 x 0,5 mm unbroken Grip range: 1,5-2,5 mm / 2-4 mm / 4-6 mm Hardness: SH78 / 57 / density 0,6 unbroken Edge trim: PVC+bi/sponge rubber /57 density 0,55 33.443 33.467 33.474 33.436 5 Insert: 29 x 0,76 mm wire 10-0,85 Insert: 27 mm steel - 0,85

33.439A 33.439CR 33.026 33.442 /57 / density 0,6 Yellow lips Edge trim: PVC+bi / CR lip Hardness: SH78/57 / density 0,55 Conditional oil-resistant Grip range: 1,5-2 mm (1-3,5 mm) 33.466 33.462 33.462R 33.416 5 Insert: 29 mm steel Edge trim: PVC / sponge rubber density 0,65-0,75 mm Insert: 25 x 0,48 mm steel Edge trim: PVC / sponge rubber density 0,65-0,75 Insert: 25 x 0,48 mm stainless st. Edge trim: PVC with brush Insert: 25 x 0,48 mm steel 11