Hydraulic and Pneumatic Protection

Transcription

1 Hydraulic and Pneumatic Protection Specialist Hydraulic Caps and Plugs Hose Protection Hose Clamps O-Rings and O-Ring Kits

2 Order any quantity - Split packs available SAE Butt Weld Covers SR 1029 Type 1 - Red LDPE Type 2 - Natural LDPE Designed to protect split-flange coupling surfaces The translucent material allows the O-ring to remain visible while providing secure protection by an internal locking bead Type 1 SAE 3000psi Nominal Diameter (ins) d h Type 2 Type 2 - SAE 3000psi h d SAE 6000psi Nominal Diameter (ins) d h Nominal Diameter (ins) d h O-Ring Face Seal Caps SR 1078 Blue LDPE Purpose-made for protection of ORF female fittings Grease Nipple Caps SR 1019 Red LDPE Effective, low-cost protection for grease nipples l D d 2 d 1 Type 1 l 1 UNF/JIC Thread Size D d1 d2 l l " " " " " " " " Type 2 Type d1 d2 l h tel (0) fax 0845 fax (0) Buy any quantity

3 Pull-Tab Hose Plug SR 6111 Yellow EVA (Ethylene Vinyl Acetate) provides good tensile strength, toughness and increased flexibility Large pull-tab allows easy removal Ideal for plugging hydraulic hoses Ribs provide comfortable fit, without stretching hose d1 d2 D H Specialist Hydraulic Caps and Plugs Hexagonal Caps SR 1127 Natural LDPE Hexagonal caps are available in all common hydraulic coupling sizes Rigid design allows easy application and removal Also suitable for protecting round components To Suit Size D h H S M M12, 1 8" BSP, 7 16" UNF M14, 1 2" UNF M16, 1 4" BSP, 9 16" UNF M18, 3 8" BSP, 3 4" UNF M22, 1 2" BSP, 7 8" UNF M24, 5 8" BSP M26, 3 4" BSP, 11 16" UNF M M36, 1" BSP, 15 16" UNF M45, 11 4" BSP, 15 8" UNF 100 Buy any quantity! SPLIT PACKS AVAILABLE Split packs available sales@mossexpress.co.uk sales@mossplastics.com web

4 Quote / sample / order online Banjo Union Caps SR 1071 Type 1 - Yellow Flexible PVC Snug fitting protects against dirt ingress Flexible, for easy fitting Fits hydraulic banjo unions to DIN 7642 B/E Finger tab for quick fitting and removal Type 2 - Yellow HDPE Fits hydraulic banjo unions to DIN 7642 B/E Clicks into place for secure fitting Harder material allows quick application L1 L2 h BANJO UNION CAP Type 2 Type 1 Pipe Outside Diameter (mm) L1 L2 h BCWJ / BCWJ BCWJ BCWJ Banjo Union Plugs SR 1016 Natural LDPE Prevent ingress of dirt and moisture Fit banjo unions DIN 7642 B/E Pipe Outside Diameter (mm) H L1 L / Banjo Bolt Caps SR 1083 Black LDPE Protection cap and retaining washer in one unit Hold everything together during assembly, storage and shipment Protect against damage and dirt ingress Easy to grip, even when wearing gloves Type 1 h d1 Type 2 d1 D D l D D d1 Type 1 l1 l2 Pipe Outside Diameter (mm) d1 l1 l2 D Type 2 Pipe Outside Diameter (mm) d1 D h l d For Banjo Bolt Diameter d D d1 Length (mm) * M M M M M * Supplied with bridged retaining loop. d1 52 tel (0) fax 0845 fax (0) Buy any quantity

5 Specialist Hydraulic Caps and Plugs Side Release Plugs SR 1120 Natural LDPE Continuous sealing lip and strong flexible side-tab on both designs Type 1 - rounded plug design ensures a low-abrasion fit Compression Fit Plugs SR 1121 Yellow LDPE Designed to protect DKO-compression fittings Fin gives a firm fit into the DKO-swivel nut h d L1 Type 1 Type 2 d h L2 D L1 Thread Type Size D d h L1 L M10 x M10 x M12 x M12 x M14 x M14 x M16 x M16 x M22 x M22 x L2 To fit DKO fittings Thread (nipple 24 with Size D O-Ring) D d h L1 L M12 x 1.5 6L M14 x 1.5 6S, 8L M16 x 1.5 8S, 10L M18 x S, 12L M20 x S M22 x S, 15L M24 x S M26 x L M30 x 2 20S, 22L M36 x 2 25S, 28L M42 x 2 30S M45 x 2 35L M52 x 2 38S, 42L Messy o-rings? Get organised with o-ring kits! Split packs available sales@mossexpress.co.uk sales@mossplastics.com web

6 Free samples Fire Protection Sleeve SR 6001 Outer Sleeve: Red Silicone Inner Sleeve: 6 Micron Calcium Silicate Yarn High-performance flexible protection cover for cables, hydraulic leads and rubber hose lines Fire Protection Sleeving gives a protection against high temperatures, radiation heat, direct flames and liquid metal splashes Inner sleeve has good insulation properties, 700 C service temperature Red silicone outer cover is self-extinguishing Flexible sleeving allows easy application to curved or irregular shapes Internal Diameter (mm) m m m m m m m m m Premium Fire Protection Sleeve SR 6002 Outer Sleeve: Grey Silicone Inner Sleeve: 6 Micron Calcium Silicate Yarn Premium Protection Cover for cables, hydraulic leads and rubber hose lines Provides protection against high temperatures, radiation heat, direct flames and liquid metal splashes Inner sleeve has good insulation properties, 700 C service temperature Smooth and thick extruded silicone outer cover Keeps shape well allowing easy application onto straight hoses, pipes and cables Internal Diameter (mm) m m m m m m m m m m m m 54 tel (0) fax 0845 fax (0) Buy any quantity

7 Hose Protection Spiralguard SR 1081 Black HDPE Suitable for the protection of most types of hydraulic, pneumatic and industrial hose assemblies across a wide range of industries Exceptional anti-crushing performance High abrasion resistance Good resistance to UV rays Easy to fit - reduces risk of industrial injury Operating temperature: minimum -65 C, continuous +90 C, max +100 C Suitable for wrapping single hoses or multiple-hose looms Proven in arduous conditions Conveniently coiled and packed in cartons for easy storage Please request a sample to test the suitability of this product for your application Supplied lengths and colours: Standard product packed in 20-metre coils Also available in yellow When ordering yellow, add 'Y' as suffix to part number: for example SGX 75Y How to calculate quantity: Outside diameter of hose Nominal diameter Spiralguard (mm) x length (m) of hose to be covered Example: 25m length of 40mm diameter hose, select the Spiralguard product based on wrapping range SGX = x 25 (mm) = 30 metres of Spiralguard SGX-40 Nominal Diameter Wrapping Hose Multi Dash 1-Wire 2-Wire (inside diameter) Range Inside Diameter Spiral Size SGX-12* mm 3 16" m SGX mm 1 4" m SGX mm 1 4" m 5 16" m 3 8" m SGX-25* mm 1 2" m SGX mm 5 8" m 3 4" m SGX-40* mm 1" m SGX mm 11 4" m 11 2" m SGX mm 2" m SGX Hose Looms 80mm-200mm 20m * Not available in yellow material. Split packs available sales@mossexpress.co.uk sales@mossplastics.com web

8 Quote / sample / order online Spiral Guard FRAS SR 1081 Black HDPE Flame Retardant Anti-Static Spiral Guard Tested and approved in accordance with the former British Coal specification 182:1986, satisfying the requirements of the nonmetallics scheme for use underground Tested and approved by Mine Safety Laboratory Department of Mineral Resources, NSW to AS2660 FRAS Compliance International Standard : ISO 6805 Patents apply: Australia: Germany: Italy: United Kingdom: United States: Nominal Diameter (inside diameter) Wrapping Range Hose Inside Diameter 1-Wire 2-Wire Multi Spiral Dash Size SGX-16FRAS mm 1 4" m SGX-20FRAS mm 1 4" m 5 16" m 3 8" m SGX-25FRAS mm 1 2" m SGX-32FRAS mm 5 8" m 3 4" m SGX-40FRAS mm 1" m SGX-50FRAS mm 11 4" m 11 2" m SGX-75FRAS mm 2" m SGX-90FRAS 80 Hose Looms 80mm-200mm 20m Coloured Spiral Guard SR 1081 HDPE Colour Black Blue Green Orange Red Silver White Nominal Diameter Wrapping Range SGX-12BLA SGX-12BLU SGX-12RED m SGX-16BLA SGX-16SIL m SGX-20BLA SGX-20BLU SGX-20GRE SGX-20ORA SGX-20RED SGX-20SIL SGX-20WHI m SGX-25BLA m SGX-32BLA SGX-32GRE SGX-32WHI m SGX-40BLA m SGX-50BLA m SGX-75BLA m SGX-90BLA m SGX-110BLA m 56 tel (0) fax 0845 fax (0) Buy any quantity

9 Hose Protection Hose Protector SR 6000 Black, Orange and Yellow PVC Protects hose against point of contact wear with abrasive surfaces Very durable material with high wear factor Moulded grooves designed to fit with cable ties Easy to assemble and remove Typically used on hydraulic hoses, fuel and oil lines, brake systems, wiring harnesses and battery cables Length Colour (ins) (mm) " Orange " Black " Yellow " Orange " Black " Yellow " Orange " Black " Yellow " Orange " Black " Yellow " Orange " Black " Yellow 50 Spiral Wrap SR 1794 Black PE Lightweight protective wrap Provides cost-effective hose and cable protection S Cable Bundle D d S Dia (mm) SBX-03-E m SBX-06-E m SBX-08-E m SBX-10-E m SBX-12-E m SBX-15-E m SBX-19-E m SBX-24-E m D d Split packs available sales@mossexpress.co.uk sales@mossplastics.com web

10 Over 500 million parts in stock Textile Sleeves SR 1082 Black Nylon 6 Highly abrasion and burst resistant Temperature resistance: -40 C to +130 C Standard roll length: 50 metres US Mine Safety and Health Administration (MSHA) approved product Quick Sleeves SR 1080 Black 1050 ballistic basket weave with oz urethene coating on one side Eliminates hydraulic line contamination during hose replacement Resistant to heat, ozone and abrasion Easy assembly and removal of bundles Inside Round Diameter (mm) External Flattened Width (mm) TSL TSL TSL TSL TSL TSL TSL TSL TSL TSL TSL TSL TSL Inside Round Diameter (mm) Roll Length (m) TQS TQS TQS TQS TQS TQS TQS Cinch Straps: Standard & Hanging SR 1099 Strap - Black Nylon 11, plastic buckles Hook and loop design of strap holds hoses securely while allowing the hoses to expand or contract as pressure changes Heavy duty version is reinforced with Ballistic Cordura Nylon and is ultrasonically welded to a 11 2" hook and loop material All hardware is nickel-plated steel Standard Cinch Strap Standard Heavy Duty Circumference of Hose Bundles (mm) Straps per Package TCS-4 TCS-4H TCS-8 TCS-8H TCS-12 TCS-12H TCS-16 TCS-16H TCS-20 TCS-20H TCS-24H Hanging Cinch Strap Standard Heavy Duty Circumference of Hose Bundles (mm) Straps per Package THCS-4 THCS-4H THCS-8 THCS-8H THCS-12 THCS-12H THCS-16 THCS-16H THCS-20 THCS-20H tel (0) fax 0845 fax (0) Buy any quantity

11 Hose Clamps Worm-Drive Hoseclamps SR 6100 Stainless Steel Band (AISI 430 / W2) Yellow Galvanised Steel Screw 9mm band width has a recommended maximum tightening torque of 3.0 Nm 12mm band width has a recommended maximum tightening torque of 5.0 Nm Solid band offers better hose protection than perforated alternative Spotwelded house C7 Hexagonal screw 9mm Band Width 12mm Band Width Clamping Range (mm) Auto Code M / X A X A 50 T-bolt Clamps SR 6101 Stainless Steel (AISI 430 / W2) Clamp conforms to DIN 3017 Secures pipes and hoses at high pressure Strong construction with full bushings BW D BW D Clamping Range (mm) Band Width (mm) Bolt Size M5 x M5 x M5 x M5 x M6 x M6 x M6 x M6 x M6 x M6 x M6 x M6 x M8 x M8 x M8 x M8 x M8 x M8 x M8 x M8 x M8 x BW Split packs available sales@mossexpress.co.uk sales@mossplastics.com web

12 Next day delivery Worm-Drive Hoseclamps - AISI 304 / W4 SR 6121 Stainless Steel AISI 304 / W4 Band housing and screw is AISI 304 9mm band width has a recommended maximum tightening torque of 3.0 Nm 12mm band width has a recommended maximum tightening torque of 5.0 Nm Stamped rather than perforated band, with rolled-up edges, to avoid hose distortion when clamping a flexible rubber hose C7 hexagonal head allows standard tools to be used for fitting and removing NEW T-Bolt Clamps - AISI 304 / W4 BW D SR 6122 Stainless Steel AISI 304 / W4 Band housing and screw is AISI 304 Clamp conforms to DIN 3017 Band has rolled up edges to prevent cutting into the hose The bridge, solid rings and three welded points ensure strength with increased safety The raised screw head facilitates tightening C7 hexagonal head allows standard tools to be used for fitting and removing BW BW D Band Width (mm) Clamping Range (mm) Auto Code M / X A /1X A /2X NEW Clamping Range (mm) Band Width (mm) Bolt Size M5 x M5 x M5 x M5 x M6 x M6 x M6 x M6 x M6 x M6 x M6 x M6 x M8 x M8 x M8 x M8 x M8 x M8 x M8 x M8 x M8 x M8 x tel (0) fax 0845 fax (0) Buy any quantity

13 Hose Clamps Plastic Hose Clamps SR 1934 Black Nylon 6.6 P-Clip Clamp NEW SR 6109 Zinc Plated Finish, EPDM Liner Rubber liner absorbs vibration and secure the clamping of pipes, conduits and cables The rubber liner is highly ozone resistant Rubber temperature range is -50 C to +100 C Band width 13mm Screw holes M6 Hose Diameter W We are here to help... Our Customer Service advisors are friendly, knowledgeable, and ready to help you find the right product for your application. Call +44 (0) Clamping Range (mm) D L1 L2 Min. Max. (mm) (mm) Split packs available sales@mossplastics.com web 61

14 Over 2000 new products O-Rings - Imperial SR 6150 Nitrile (NBR) 70, FPM 75 O-Rings - Metric SR 6151 Nitrile (NBR) 70, FPM 75 Imperial O-Ring Kits Individual s NBR FPM 75 For kit contents, see below. Inside Cross Kit Qty NBR FPM Diameter Section Metric O-Ring Kits Individual s NBR FPM 75 For kit contents, see below. Inside Kit Qty NBR FPM Cross Section Diameter tel (0) fax 0845 fax (0) Buy any quantity

15 O-Rings and O-Ring Kits Individual s NBR FPM Internal Diameter Cross Section Kit Qty O-Rings - European Metric SR 6152 Nitrile (NBR) 70, FPM 75 European Metric O-Ring Kits NBR FPM 75 Self-Centering Bonded Washers - Imperial SR 6156 Washer - Mild Steel Seal - Nitrile (NBR) 80 Self-Centering Bonded Washers - Metric SR 6157 Washer - Mild Steel Seal - Nitrile (NBR) 80 Imperial Bonded Washer Kit NBR 80 For kit contents, see below. Individual s BSP Kit Qty " " " " " " " " " " Metric Bonded Washer Kit NBR 80 For kit contents, see below. Individual s Metric Kit Qty M M M M M M M M M M Split packs available sales@mossexpress.co.uk sales@mossplastics.com web

16 Order any quantity - Split packs available SAE Flange O-Rings SR 6154 Nitrile (NBR) 90 SAE Hose End Fitting O-Rings SR 6155 Nitrile (NBR) 90 O-Ring Kit For kit contents, see below. Individual s NBR 90 Kit Qty Inside Diameter Cross Section O-Ring Kit For kit contents, see below. Individual s NBR 90 Kit Qty Inside Diameter Cross Section O-Ring Face Seal (ORFS) Thread SR 6160 Nitrile (NBR) 90 O-Ring Kit NBR 90 For kit contents, see below. Individual s To Fit Kit Qty Inside Diameter Cross Section Thread Size " " " " " " " tel (0) fax 0845 fax (0) Buy any quantity

17 O-Rings and O-Ring Kits SAE Flange Seals SR 6158 Polyurethane 90 D Rings SR 6159 Nitrile (NBR) 90 SAE Flange Seal Kit Polyurethane 90 D-Ring Kit NBR 90 For kit contents, see below Individual s To Fit Thread Size Kit Qty " " " " " " For kit contents, see below Individual s Thread Size Kit Qty " " " " " O-Ring Cord Splicing Kit SR 6153 Nitrile (NBR) 70 Kit includes: 1 x Tape Measure 1 x Cutting Block And the lengths of O-Ring Cord below: Cord Splicing Kit Cord contained in each kit 1 x Bottle of 3gm Cyanacrylate Adhesive 1 x Retractable Cutting Knife NBR 70 Cord Diameter Metres Per Kit Split packs available sales@mossexpress.co.uk sales@mossplastics.com web

18 48 Hydraulic and Pneumatic Protection Threaded plugs and caps, hose wraps and hose protection including Spiralguard, for hydraulic and pneumatic protection. Our protection products are ideal for sealing and protecting hydraulic and pneumatic fittings against moisture, dirt, corrosion, or temperatures. Spiralguard has exceptional anti crushing performance and good resistance to UV rays. Spiralguard is suitable for the protection of hose assemblies across a wide range of industries.