General Specifications Cables (for RIO) GENERAL This General Specification (GS) covers the specifications of signal cables and communication cables used in the RIO device. EXTERNAL DIMENSIONS, MODELS AND SUFFIX CODES Bus Cables and Terminators YCB121 RIO Bus Cable Shield Cable length F11E.ai YCB121 RIO Bus Cable Suffix Code -M Enter Cable length in every 1 m. Max. cable length 750 m (Suffix code: -M750). Option Code /NL Supports CSA Non-Incendive instrumentation YCB128 RIO Bus Terminator 18 28 RIO bus connector unit Terminator 20 F12E.ai YCB128 RIO Bus Terminator Yokogawa Electric Corporation 2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 Japan Tel.: 81-422-52-5634 Fax.: 81-422-52-9802 Copyright May 2008 (YK) 1st Edition May 1, 2008 (YK)
2 Cables AKB301 Signal Cable (36-40 pins) 44.4 80 44.4 42 Cable length 32 F13E.ai AKB301 Signal Cable (36-40 pins) Suffix Code -M Enter Cable length in every 5 m. Max. cable length 50 m (Suffix code: -M050). AKB311 Signal Cable (6-10 pins) SPBD side F14E.ai AKB311 Signal Cable (6-10 pins)
3 KB3 RS-232C Modem Cable for Start-Stop Synchronous Communication KB4 RS-232C Null Modem Cable for Start-Stop Synchronous Communication marker (3) 46 Cable length 46 (3) F15E.ai KB3 RS-232C Modem Cable for Start-Stop Synchronous Communication (D-sub 25 - D-sub 25 male pins) -02 Cable length 2 m -05 Cable length 5 m -10 Cable length 10 m -15 Cable length 15 m Style Code *B Style B Note: If a RS-232C interface circuit at the partner equipment is insulated, use an AKB141 cable. KB4 RS-232C Null Modem Cable for Start-Stop Synchronous Communication (D-sub 25 - D-sub 25 male pins) -02 Cable length 2 m -05 Cable length 5 m -10 Cable length 10 m -15 Cable length 15 m Style Code *A Style A Note: If a RS-232C interface circuit at the partner equipment is insulated, use an AKB142 cable.
4 AKB141 For Connecting RS Circuit Isolated Devices RS-232C Modem Cable for Start-Stop Synchronous Communication AKB142 For Connecting RS Circuit Isolated Devices RS-232C Null Modem Cable for Start-Stop Synchronous Communication (3) 46 marker Cable length 46 (3) ACM CN1 I = 150 M3 Cable shield F16E.ai AKB141 For Connecting RS Circuit Isolated Devices RS-232C Modem Cable for Start-Stop Synchronous Communication (D-sub 25 - D-sub 25 male pins) For Connecting RS Circuit Isolated Devices AKB142 RS-232C Null Modem Cable for Start-Stop Synchronous Communication (D-sub 25 - D-sub 25 male pins)
5 AKB143 RS-232C Null Modem Cable for Start-Stop Synchronous Communication AKB144 RS-232C Null Modem Cable for Start-Stop Synchronous Communication 36.8 (3) 46 Cable length 38 (4) F17E.ai AKB143 RS-232C Null Modem Cable for Start-Stop Synchronous Communication (D-sub 25 - D-sub 9 male pins) Note: To comply with EMC Standards, connect a ferrite code (A1179MN) to this cable. Order it separately. AKB144 RS-232C Null Modem Cable for Start-Stop Synchronous Communication (D-sub 25 - D-sub 9 female pins) AKB161 RS-422/RS-485 Cable (Crimp terminal M4-M3) Cable length 10 20 30 40 80 Blue 70 M3 connector F18E.ai AKB161 RS-422/RS-485 Cable ( Crimp terminal M4-M3 ) Suffix Code -M Enter Cable length in every 5 m. Max. cable length 100 m (Suffix code: -M100).
6 AKB162 RS-422/RS-485 Cable (Crimp terminal M4-M4) Cable length 10 20 30 Blue 40 80 70 F19E.ai AKB162 RS-422/RS-485 Cable ( Crimp terminal M4-M4 ) Suffix Code -M Enter Cable length in every 5 m. Max. cable length 100 m (Suffix code: -M100). ORDERING INFORMATION Specify model, suffix codes and style code. TRADEMARK CENTUM is a registered trademark of Yokogawa Electric Corporation. Other company and product names appearing in this document are trademarks or registered trademarks of their respective holders. Subject to change without notice.