DT105X / PB105 Series

Transcription

1 DT105 / Series Cash Drawer Trigger & Printer Beeper User's Manual TM

2 Contents Information... 1 Technical And Operational Description... 3 Connections Load Test Specifications Communication Protocol... 9 Application Note FCC COMPLIANCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communication. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. GIGA-TMS Inc. Office : 8F No 31 Lane 169, Kang-Ning St., Hsi-Chih, Taipei, Taiwan Tel : Fax : Web site : promag@ms.hinet.net

3 Information Cash Drawer Trigger & Printer Beeper MACHINE TYPE FUNCTION USB Ver 1.1 LED STATUS O/P DC V AUTO TEST EPSON CITIZEN PROTOLINK DT105U Cash Drawer Trigger USB Interface Command control and RTS/DTR signal control STAR COMMAND RTS/DTR RS-3 LED STATUS O/P DC V AUTO TEST EPSON CITIZEN PROTOLINK DT105R Cash Drawer Trigger RS3 Interface Command control and RTS/DTR signal control STAR DC 9 V - 1 V COMMAND RTS/DTR LED STATUS DC 8 ~ V PRINTER CASH DRAWER OUTPUT 105 d B DC V Printer Beeper - 1 -

4 Information Standard Package DT105U Main unit ( DT105U ) Velcro Fastener ( ASY-M ) CD-ROM ( DISK510 ) DT105R Main unit ( DT105R ) Velcro Fastener ( ASY-M ) Power Plug ( ASY-M ) CD-ROM ( DISK510 ) Main unit ( ) Velcro Fastener ( ASY-M ) Optional Power Adaptor DC9V/10VAC ( APR-105 )or DC9V/30VAC ( APR-1013) - -

5 Technical And Operational Description Front Panel and Operations DRIVE INDICATOR PHONE JACK READY/ RECEIVE INDICATOR ( DT105 ) BUZZER HOLE ( ) CABLE DRIVE INDICATOR ( Red color ) The status LED provides visual indication of the deivce output operating READY/ RECEIVE INDICATOR ( Green color ) <DT105> Indicating the device is ready to accept new inputs and communication status from Host. BUZZER HOLE < > The sound's hole for Buzzer. PHONE JACK For connection to Cash Drawer. CABLE Connect to USB or RS3 ( include power supply ) interface

6 Technical And Operational Description Introduction This manual provides basic information about the Models of DT105U (DT105R) Universal Serial Bus ( RS3 Serial Port) Cash Drawer Triggers, and the Printer Beeper. The DT105U(DT105R) Cash Drawer Trigger is designed to provide USB (RS3) interfacing to the cash drawer. This allows cash drawers, previously connected to printers and cash registers, to be connected to a USB (RS3) port of the computer. The DT105U USB Trigger uses a Virtual Serial Port Driver, making it appear to have the software like a standard RS3 Serial Port. This way the existing Software can communicate with the USB Cash Drawer Trigger as if it were connected to a Serial Port. A unique serial number is assigned to each USB Trigger Module and the Driver Software will assign the next available Serial Port to each device it recognises ( multiple Triggers can be used on one PC). The DT105U(DT105R) module is designed to accept modular cash drawer connectors.all standard printer drawer open commands are used to trigger the device and the ESC/ status command is also available to read the drawers open or closed condition. * DT105U is to open the cash drawer when it receives the trigger command or the RTS/DTR signal control from the computer via USB port. * DT105R is to open the cash drawer when it receives the trigger command or the RTS/DTR signal control from the computer via RS3 port. Indicators Information DT105 with COMMAND control STATUS POWER ON READY OPEN CASH DRAWER COMMUNICATION GREEN LED BLINK TIMES ON BLINK RED LED BLINK TIMES ON DT105 with RTS/DTR signal control STATUS POWER ON READY OPEN CASH DRAWER GREEN LED BLINK TIMES ON RED LED BLINK TIMES ON BUZZER - BUZZER - COMMUNICATION O RTS/DTR H/L L/L, H/H L/H STATUS READY ACTION GREEN LED ON - - BUZZER

7 Connections WAS-1510 USB 1 3 Shell COLOR RED WHITE GREEN BLACK Drain Wire FUNCTION POWER + D - D + Shield 5 PIN WAS-156 DSB 9P FEMALE * POWER JACK + WAS-158 COLOR PURPLE WHITE YELLOW BLACK BLACK BLUE FUNCTION 7 PIN TD 5 RD 6 DTR RTS 1 CTS 3 RED 9-1Vdc ** 7 - BLACK * DSB 9P FEMALE Pin 6,7 connected togeter ** 5Vdc to customer specifications 6P6C COLOR BLACK WHITE RED YELLOW PURPLE BLUE FUNCTION Sol - 6 PIN 1 Status 3 Sol + Sol - 5 6

8 Connections 6P6C Modular Jack Connector Pin 6 Pin 1 Pin Number Function Sol - (for EPSON drawer ) Sol + Status Sol - Application Note PIN 6 PIN 5 (for EPSON drawer ) PIN PIN 3 PIN PIN 1 Cash Drawer Lock DT105U DT105R - 6 -

9 Load Test Load Test Circuit DT105, DT3 Vout PIN PIN (PIN5) RL= Ohms Trig Load Test Timing Diagram Vout.5 Sec RL = Ohms ( 1Amp ) Active Time = 150ms 150 ms Trig - 7 -

10 Specifications USB Ver 1.1 RS-3 O/P DC V LED STATUS USB Interface ( for DT105U ) USB V1.1 & USB HID Class V1.0 RTS ( Request To Send ) & DTR ( Data Terminal Ready ) be used RS3 Interface ( for DT105R ) RS3, Half-Duplex, 8N1, 9600 bps RTS ( Request To Send ) & DTR ( Data Terminal Ready ) be used Output Power RJ1 Connector, Rating suits Ohms solenoid ( ), On time : 150ms, Repeat rate : 3 seconds MULT-COLOR LED Display Green LED - Ready / Communication Red LED - Open Cash Drawer Operate Sound ( for DT105U, DT105R ) 3Khz, 5 db, Built in the device 105 d B Operate Sound ( for ) DC V 3Khz, Min 105 db at 30cm / Volts AC Power Supply ( for DT105R ) DC DC 9V -1V, 500mA ( DC 5V to customer specifications ) Dimensions D 6 x W 56 x H 85 mm Cable Lenght - DT105U : 1650 mm DT105R,DT3,BP105 : 1550 mm gm % C/F Weight DT105U : 90g ( including cable ) DT105R : 110g ( including cable ) BP105 : 70g ( including cable ) Environment : Operating Temp : 0 ~ 55 Deg.C Storage Temp : -10 ~ 55 Deg.C Humidity : 10 ~ 90 % relative Mounting : Portable or Any surface - 8 -

11 Communication Protocol DT105U & DT105R Communication Protocol 1. CITIZEN OPEN CASH DRAWER 1 ASCII BEL Reply (HE) F Cash drawer close HE F Cash drawer open. STAR OPEN CASH DRAWER 1 ASCII BEL or FS Reply (HE) F Cash drawer close HE 07 or 1C F Cash drawer open 3. EPSON OPEN CASH DRAWER 1 AND ASCII ESC p m t1 t Reply (HE) F Cash drawer close HE 1B 70. PROTOLINK OPEN CASH DRAWER 1 ASCII 00,30 01,31 00~FF 00 ~ FF * m = 00h, 30h Drawer kick-out connector pin. * m = 01h, 31h Drawer kick-out connector pin5. * Open Cash Drawer Time = t1 * ms C C 1 CR F PS. Cash drawer open 1. m = 00h, 01h, 30h, 31h. t1=t=0 ~ 55 (t1=0 not active) 3. t>t1 or t=t1 Reply (HE) F Cash drawer close HE D F Cash drawer open 5. PROTOLINK DUMP FIRMWARE VERSION ASCII HE D G CR D 6. EPSON ENABLE AUTOMATIC STATUS BACK Reply (ASCII) ( C ) 0 0 G I G A - T M S D T V E R S I O N CR Reply (HE) ASCII GS a FF F Cash drawer close HE 1D 61 FF F Cash drawer open 7. It is also sending the status string on every open/close change of the drawer automatically. Reply (HE) : F Cash drawer open or F Cash drawer close DT105U & DT105R Signal Control and Status CONTROL PIN DTR RS3/TTL PIN7 RTS RS3 / TTL RED LED GREEN LED +1V / L +1V / L +1V / L -1V / H ON -1V / H +1V / L ON -1V / H -1V / H BUZZER LED ON STATUS READY OPEN STATUS PIN8 CTS RS3/TTL +1V / L -1V / H STATUS Cash drawer open Cash drawer close - 9 -

12 Application Note 1. System For Standard Connect PRINTER CASH DRAWER. System For Standard Connect Plus PRINTER CASH DRAWER 3. System Replace Printer By DT-105U/R DT105U CASH DRAWER DT105R. System Replace Printer By DT-105U/R Plus DT105U CASH DRAWER DT105R 5. System Replace Printer By DT-105U/R Plus Two DT105U CASH DRAWER DT105R