Disassembly of Waste Electrical and Electronic Equipment (WEEE) Manual EU Waste Electronic and Electrical Equipment Directive require producers to provide information of the different electronic and electrical materials and components found in their products at its end-of-life, and disassembly references to treatment and recycling facilities. This document communicates, according to the best of Lexmark s knowledge, the following information that is intended only for the use of treatment and recycling facilities: 1. Product information 2. Materials and components list for selective treatment 3. Disassembly tools 4. Disassembly references 1. Product information Model name(s) Indicate all model name(s) within the product family Model name MS910de MX910de Series MX910de, MX910dxe MX911 Series MX911de, MX911dte MX912 Series MX912de, MX912dxe, XM9145, XM9155, XM9165 * Add rows as needed 2. Materials and components list for selective treatment Items Quantity Notes Polychlorinated biphenyls (PCB) containing capacitors 0 N/A Mercury containing components, such as switches or backlighting lamps 0 N/A Batteries 1 Lithium Manganese Dioxide coin cell Printed circuit boards greater than 10 cm 2 Multiple 17 for MX91x 13 for MS91x 1 in every Option (2x500-Sheet tray, 3000-Sheet tray, 2500-Sheet tray, SHPF, Booklet maker) 2 for Staple Finisher Doc No.: Rev. 003 Page 1 of 26
Toner cartridges, liquid and pasty, as well as colour toner 5 4 Toner cartridges 1 Waste toner bottle Plastic containing brominated flame retardants Multiple See Appendix A Asbestos waste and components which contain asbestos 0 N/A Cathode ray tubes 0 N/A Chlorofluorocarbons (CFC), Hydrochlorofluorocarbons (HCFC) or Hydrofluorocarbons (HFC), Hydrocarbons (HC) 0 N/A Gas discharge lamps 0 N/A Liquid Crystal Display (LCD) greater than 100 cm 2 and those back-lighted with Gas discharge lamps 1 N/A External electrical cables 1 Power cable Rear side of the device Components containing refractory fibres 0 N/A Components containing radioactive substances 0 N/A Electrolyte capacitors containing substances of concern 1 0 N/A 1 With (height > 25 mm, diameter > 25 mm or proportionately similar volume) 3. Disassembly tools Item #2 Phillips screwdriver, magnetic Wire cutter E-clip puller or a small flat-head screwdriver 4. Disassembly references 4.1. Removal Procedures MS91x and MX91x Series WEEE removal WEEE materials and components removal procedures are available upon request. Contact: recycling@lexmark.com 4.2. Graphical illustration of material s and component s location See next page Doc No.: Rev. 003 Page 2 of 26
MS91x and MX91x SERIES Control Panel Doc No.: Rev. 003 Page 3 of 26
MS91x and MX91x SERIES Printhead Doc No.: Rev. 003 Page 4 of 26
MS91x and MX91x SERIES High Voltage Doc No.: Rev. 003 Page 5 of 26
MS91x and MX91x SERIES Main Power Supply Doc No.: Rev. 003 Page 6 of 26
MS91x and MX91x SERIES Electrical 2 Doc No.: Rev. 003 Page 7 of 26
MX91x SERIES ADF Covers 1 Doc No.: Rev. 003 Page 8 of 26
MX91x SERIES ADF CIS 1 Doc No.: Rev. 003 Page 9 of 26
MX91x SERIES Flatbed Scanner Doc No.: Rev. 003 Page 10 of 26
MS91x and MX91x Options 2 x 500-Sheet Tray Doc No.: Rev. 003 Page 11 of 26
MS91x and MX91x Options 3000-Sheet Tray Doc No.: Rev. 003 Page 12 of 26
MS91x and MX91x Options 2500-Sheet Tray Doc No.: Rev. 003 Page 13 of 26
MS91x and MX91x Options Stapler Finisher Doc No.: Rev. 003 Page 14 of 26
MS91x and MX91x Options SPHT Doc No.: Rev. 003 Page 15 of 26
MS91x and MX91x Options Booklet maker Doc No.: Rev. 003 Page 16 of 26
MS91x and MX91x SERIES Sensors Bizhub DF Doc No.: Rev. 003 Page 17 of 26
MS91x and MX91x SERIES Sensors PC-110/PC-210 Doc No.: Rev. 003 Page 18 of 26
MS91x and MX91x SERIES Sensors PC-410 Doc No.: Rev. 003 Page 19 of 26
MS91x and MX91x SERIES Sensors LU-204/ LU-301 Doc No.: Rev. 003 Page 20 of 26
MS91x and MX91x SERIES Sensors FS-533/PK-519 Doc No.: Rev. 003 Page 21 of 26
MS91x and MX91x SERIES Sensors FS-534/PK-520/SD-511 Doc No.: Rev. 003 Page 22 of 26
Appendix A Plastic containing brominated flame retardants Plastics greater than or equal 25g Part Description Parts Marking Tray >PS-HI FR(17)< Paper Exit Tray Guide >PS-HI FR(17)< Developer Unit Lock Section Bypass Tray /Upper >PS-HI FR(17)< Bypass Tray Section Cover /Front >PS-HI FR(17)< Inner Cover Section Collection Box >PS-HI FR(17)< Waste Toner Box Rail >PET-(GF+MD)40 FR(17)< Main Frame Section Guide Cover >PET-(GF+MD)40 FR(17)< Fusing Unit Cover /Upper >PS-HI FR(17)< Reversal Uint Holder >PS-HI FR(17)< Accessory part Collection Box >PS-HI FR(17)< Waste Toner Box Cover /Lower >PET-(GF+MD)40 FR(17)< Fusing Unit Developing Housing >ABS-GF20 FR(17) < Developer Unit Duct >PS-HI FR(17)< Air Duct Section Cover >PS-HI FR(17)< Cassette Section Housing >ABS-GF20 FR(17) < Photoconductor Unit Cover >PS-HI FR(17)< Cassette Section Duct /1 >PS-HI FR(17)< Ozone Duct Section Cover /Inside >PS-HI FR(17)< Inner Cover Section Cover /Front >PS-HI FR(17)< Inner Cover Section Cooling Duct >PS-HI FR(17)< Main Power Supply Section Housing >PS-HI FR(17)< Transfer Unit Guide Plate >PET-(GF+MD)40 FR(17)< Fusing Unit Regulating Plate >PET-(GF+MD)40 FR(17)< Paper Exit Section Doc No.: Rev. 003 Page 23 of 26
Cover /Rear >PET-(GF+MD)40 FR(17)< Fusing Unit Developing Cover >ABS-GF20 FR(17) < Developer Unit Auxiliary Tray >PS-HI FR(17)< Bypass Tray Section Cover /Front >PET-(GF+MD)40 FR(17)< Fusing Unit Rail >ABS-GF20 FR(17) < Main Frame Section Holder >PS-HI FR(17)< Paper Exit Section Installing Spacer >PS-HI FR(17)< Accessory part Duct /1 >PS-HI FR(17)< Ozone Duct Section Duct /2 >PS-HI FR(17)< Air Duct Section Guide Plate >PET-(GF+MD)40 FR(17)< Fusing Unit Cover >PS-HI FR(17)< Developer Unit Duct /3 >PS-HI FR(17)< Ozone Duct Section Duct /2 >PS-HI FR(17)< Ozone Duct Section Holder >PS-HI FR(17)< Paper Exit Section Guide >PS-HI FR(17)< Electrical Mounting Section Duct /3 >PS-HI FR(17)< Air Duct Section Holder >PET-(GF+MD)40 FR(17)< Fusing Unit Doc No.: Rev. 003 Page 24 of 26
Appendix A Plastic containing brominated flame retardants Plastics less than or equal 25g Part Description Parts Marking Scattering prevention Plate >PS-HI FR(17)< Developer Unit Holder >PET-(GF+MD)40 FR(17)< Fusing Unit Duct /1 >PS-HI FR(17)< Air Duct Section Holder >PS-HI FR(17)< Electrical Mounting Section Wiring Guide >PS-HI FR(17)< Electrical Mounting Section Holder >PET-(GF+MD)40 FR(17)< Fusing Unit Positioning Plate >PC-GF20 FR(17)< Air Duct Section Duct >PS-HI FR(17)< Electrical Mounting Section Guide >PS-HI FR(17)< Air Duct Section Duct /2 >PS-HI FR(17)< Air Duct Section Duct /1 >PS-HI FR(17)< Ozone Duct Section Mounting Plate >ABS FR(17) < Fusing Unit Duct /2 >PS-HI FR(17)< Controller Box Guide Plate >PET-(GF+MD)40 FR(17)< Erase Lamp Section Duct >PS-HI FR(17)< Bypass Tray Section Rail >PS-HI FR(17)< Waste Toner Box Auxiliary Guide >PS-HI FR(17)< Developer Unit Holder >PS-HI FR(17)< Fusing Unit Cover >PS-HI FR(17)< Ozone Duct Section Holder >PET-(GF+MD)40 FR(17)< Scanner Section Duct >PS-HI FR(17)< Scanner Section Cover >PS-HI FR(17)< Scanner Section Guide >PS-HI FR(17)< Conveyance Section Doc No.: Rev. 003 Page 25 of 26
Guide Part >PS-HI FR(17)< Developer Unit Holding Shutter >PS-HI FR(17)< Fusing Unit Doc No.: Rev. 003 Page 26 of 26