The Largest Range of Standard Floor Boxes
What is bespoke to others is standard to us We offer the largest range of floor boxes of any manufacturer. What is bespoke to others is standard for us. All of our boxes are made with strong base units, and are suitable for cavity or screed floors. However, even this large range of boxes may not suit all sites. Please contact our experienced sales team to discuss how these ranges can be adapted further. 2000 Series 500 Series 700 Series Stainless Steel 700 Series Brass 700 Series Round Stainless Steel 700 Series Round Brass Trim flange a r a a a a Trimless r a a a a a Floor finish 6.5mm or less a a a a a a Flat lid r a a a a a Floor finish > 7mm r r a a a a Fire retardant PC ABS a r r r r r All metal r r a a a a Stainless steel r r a r a r Brass or bronze r r r a r a Size 3 or 4 compartment 1,2,3 or 4 compartment socket,1,2,3,4 compartment socket,1,2,3,4 compartment socket,2,3 compartment socket,2,3 compartment Stock box depths (others to order) 55-120mm 55-120mm 65-120mm 65-120mm 65-120mm 65-120mm Minimum height: base to top of floor covering 60mm 60mm 75mm 75mm 80mm 80mm Bespoke foot print available r a a a a a Price guide See pages: 4-7 8-10 12-15 12-15 16-18 16-18 www.cableductuk.com 2
The Largest Range of Standard Boxes Floor box Overview All of our floor boxes are high quality. When choosing the right one it is important to pick a floor box that does everything you need it to, and is suitable for the floor requirements on your site. Not all floor boxes are the same. Take a look below and see which of our floor boxes you should choose. 2000 Series (pgs 4-7) The classic office floor box with innovative features 6mm lid recess, with trim flange ideal for carpeted floors Suitable for screed or cavity sub floor 4.0mm thick infill for strength 3 or 4 compartment Instant, tool free installation (patented) Sprung closed outlet flaps (patented) 500 Series (pgs 8-10) A highly adaptable, trimless floor box 0 (flat lid) to 6.5mm lid recess, trimless, ideal for vinyl or resin floors Suitable for screed or cavity sub floor 1, 2, 3, or 4 compartment Easily adapted to any size making ideal for retro fitting or refurbishment Screed Screed Cavity Trim flange Strong Cavity 700 Series (pgs 12-15) 700 Series Round (pgs 16-18) The prestigious floor box for any floor covering Any lid recess from 0 (flat lid) to 40mm Suitable for screed or cavity sub floor 1, 2, 3, 4 compartment Easily adapted to any size Available with or without trim flange In stainless steel, brass or antique bronze finish The prestigious floor box for any floor covering Any lid recess from 0 (flat lid) to 30mm Suitable for screed or cavity sub floor 2 or 3 compartment or socket box Available with or without trim flange In stainless steel, brass or antique bronze finish Screed Screed Cavity Trim flange Strong Cavity Trim flange Cable Management 3 30 Selhurst Road London SE25 5QF Telephone 020 8683 1126
2000 Series Floor Box Buyers Guide The lid and frame are made from fire retardent, halogen free PC/ABS, and the standard colour is RAL 7015. One of the strongest floor boxes on the market today, it is fitted with a 4mm steel infill plate, and passes the point load tests for raised access flooring, withstanding a safety load of 900kg. Unless specified otherwise, all boxes are supplied with 20 and 25mm conduit knockouts in the base box. The recess in the lid is 6mm, and the lid and frame are height adjustable for thinner floor coverings. The product code of all standard sizes is shown below. Other depths available to order, please call our sales team to discuss your requirements. Part code Number of compartments Plug space d1 Wiring space d2 Base box depth d0 Floor cut out (mm) Feed type SBOX-2355C 3 28-31mm 22mm 55mm 307*244 Conduit (20mm) for cavity or screed SBOX-2355U3 3 28-31mm 22mm 55mm 307*244 In screed trunking U3-225x25mm SBOX-2355FF 3 28-31mm 22mm 55mm - Flush screed trunking FF12 330x55mm SBOX-2365C 3 30-34mm 29mm 65mm 307*227 Conduit (20mm & 25mm) for cavity or screed SBOX-2365U3 3 30-34mm 29mm 65mm 307*244 In screed trunking U3-225x25mm SBOX-2365FF 3 30-34mm 29mm 65mm - Flush screed trunking FF13 330x65mm SBOX-2385C 3 35-41mm 39mm 85mm 307*227 Conduit (20mm & 25mm) for cavity or screed SBOX-2385U3 3 35-41mm 39mm 85mm 307*227 In screed trunking U3-225x25mm SBOX-2320C 3 63-69mm 44mm 120mm 307*227 Conduit (20mm & 25mm) for cavity or screed SBOX-2455C 3 28-31mm 22mm 55mm 307*244 Conduit (20mm) for cavity or screed SBOX-2465C 4 30-34mm 29mm 65mm 307*227 Conduit (20mm & 25mm) for cavity or screed SBOX-2465U3 4 30-34mm 29mm 65mm 307*244 In screed trunking U3-225x25mm SBOX-2465FF 4 30-34mm 29mm 65mm - Flush screed trunking FF15 440x65mm SBOX-2485C 4 35-41mm 39mm 85mm 307*227 Conduit (20mm & 25mm) for cavity or screed SBOX-2485U3 4 35-41mm 39mm 85mm 307*227 In screed trunking U3-225x25mm SBOX-2420C 4 63-69mm 44mm 120mm 307*227 Conduit (20mm & 25mm) for cavity or screed Cavity floor fed by conduit Flush screed trunking FF13 In screed trunking U3 Options: Installed into screed for conduit feed - supplied without push fit and holes blanked off Fed by in screed trunking. Boxes must be located at the time the trunking is installed Part of a flush screed trunking system. Boxes can be retrofitted to existing trunking. Please note that a base box is not provided with these boxes. Instead, a length of flush floor lid and channel is supplied. SBOX-2000-LOCK Extra to supply lid with a cam lock To order, please call 020 8683 1126, send a fax to 020 8689 7896 or email info@cableductuk.com d1 will reduce if the lid is adjusted down to suit thinner floor coverings 4
Specifiers Guide 2000 Series Floor Box The classic office floor box with innovative features... Central flap can be replaced with a lockable version. Cam locks are provided as standard but others are available. Improved Safety Spring closed outlet flaps: no stuck up flaps when not in use; no dangerous gaps from lost flap (patent GB2473156) Flaps open when cables present and self support to prevent cable damage Saves time and effort during cavity installation. Instantly fixes box to floor when pushed in place for any floor tile thickness. No tools or screws needed (patent GB2440371) Reversible lid Instant, tool free trim removal for carpet fitting or reversal of outlet flap Push fits back in place (patent GB2473157) The base box depth comes in 4 standard sizes from 55mm to 120mm deep. Both the overall depth and the plug top space can be made to suit individual requirements, including deep audio visual cables or 3 phase sockets. The box can be fed by busbar, conduit, in screed trunking, or it can be placed in a run of flush screed trunking. The minimum sub floor depth is 55mm. The lid is recessed to accept a carpet or tile infill of 6mm or less. The standard colour is slate grey (RAL 7015) and fire retardent PC/ABS Cable Management 5 30 Selhurst Road London SE25 5QF Telephone 020 8683 1126
2000 Series Floor Box Buyers Guide -Outlet Plates All plates are interchangeable. Special plates can be made to order. 3 compartment floor box 4 compartment floor box Blank Plate 2301 2401 Two Schuko European Sockets 2351 2451 Twin switched 13A 2354 2454 Twin unswitched 13A 2357 2457 Plate to accept 2 x standard 1 gang 2358 n/a 2 x Euromod 50x50 module 2359 2459 Twin latching RCD 2361 2461 Twin active reset RCD 2362 2462 2 x 5A unswitched 2376 2476 1 x standard 2 gang aperture 2386 n/a 3 x 13A unswitched sockets 2390 2490 4 x LJ6C cut outs (22.4x36.4mm) 4 x Alphasnap cut outs (23.5x47.5) 4 x LJ6C cut outs angled plates 2391 2491 2392 2492 2393 2493 For boxes 85mm or deeper only Standard outlets 22.4x36.4 for Hellermann Tyton; Modsnap; Austin. Can be used with cat 6 for boxes of 85mm or deeper. 6 cut outs (ref 91S) are also available ex stock. LJ6C modules available: SBOX-LJ6C BLANK - blanking module SBOX-DATA-CAT5E - Cat5e data module to fit type 91 plates SBOX-DATA-CAT6 - Cat6 UTP data module to fit type 91 Many other plates including non-standard sockets are also available, please call the sales team on 020 8683 1126 to discuss your needs. Plates can be supplied dished if a greater plug top space is required. www.cableductuk.com 6 The Art of
Installation Guide 2000 Series Floor Box Installation in to cavity floor: (3) (2) 1) Cut an opening 307x227mm 2) Push base box into opening. The unique, patented quick fit will latch beneath tiles of thicknesses up to 60mm and will hold firmly by friction for deeper floors If required, the base box can additionally be screw fixed through the top flange 3) The lid and frame then push fit into place, adjustable for floor finish thicknesses from 0 (when the floor finish is part of the cavity floor tile) to 6.5mm for the 85mm or 120mm deep boxes. The 65 and 55mm boxes are adjustable for thicknesses 4-6.5mm 4) The lid and frame can be easily removed for carpet fitting by releasing the patented latch (3) Installation in to Flush Screed trunking 1) Standard length of 500mm channel is replaced with service box segregation channel 2) Standard 500mm length of FF lid is replaced with cut out lid for floor box. This lid contains the frame on to which outlet plates are fixed (3) 3) Floor box is fixed into the cut out flush floor lid using the patented quick fit Installation in to in screed (underfloor) trunking Note that with in screed trunking systems the floor boxes must be positioned prior to laying the screed. 1) Position the floor boxes and junction boxes according to the required layout and mount to the sub floor. 2) Connect the trunking body to the junctions and floor boxes by inserting through the box connecting sleeve, cutting any trunking lengths as required. Connect the vertical bends as wall connections. 3) Cables may then be placed into the open trunking from above. It is a good idea to add pull wires at this stage for any future cable changes. Place the trunking lids on to the bodies and tightened the joint cover sleeves. C able Management www.cableductuk.com 77 T h e Art o f 30 Selhurst Road London SE25 5QF Telephone 020 8683 1126
500 Series Floor Box Buyers Guide The ordering product code of all standard sizes is shown below. Other sizes are available to order, please call our sales team to discuss. Unless specified otherwise, all boxes are supplied in the standard finish, with 20 and 25mm conduit knockout in the base box to suit either cavity floors or fixed remotely in screed floors. Code Number of compartments Frame size (mm) Base box depth (mm) Base box size (mm) Plug top space (mm) Feed type SBOX-516 one 126x230 85 132x236 27.2 conduit SBOX-518 one 126x230 65 132x236 27.2 conduit SBOX-512 one 126x230 120 132x236 27.2 conduit SBOX-524 two 213x230 55 219x276 20.2 conduit SBOX-526 two 213x230 85 213x236 27.2 conduit SBOX-528 two 213x230 65 213x236 27.2 conduit SBOX-522 two 213x230 120 213x236 27.2 conduit SBOX-FF12-502 three 300x230 55 n/a 20.2 flush screed trunking 330x55 SBOX-FF13-503 three 300x230 65 n/a 27.2 flush screed trunking 330x65 SBOX-504 three 300x230 55 306x276 20.2 conduit SBOX-505-U3 three 300x230 55 306x276 20.2 in screed trunking 225x25 SBOX-508-U3 three 300x230 65 306x236 20.2 in screed trunking 225x25 SBOX-506 three 300x230 85 306x236 27.2 conduit SBOX-508 three 300x230 65 306x236 27.2 conduit SBOX-502 three 300x230 120 306x236 27.2 conduit SBOX-546 four 387x230 85 393x236 27.2 conduit SBOX-548 four 387x230 65 393x236 27.2 conduit SBOX-542 four 387x230 120 393x236 27.2 conduit Standard finish - recessed lid - shown three compartment Fed by in screed trunking. Boxes must be installed at the time the trunking is installed Part of a flush screed trunking system. Boxes can be retrofitted to existing trunking. Please note that a base box is not provided with these boxes. Instead, a length of flush floor lid and channel is supplied. For retrofitting please remove a length of lid anywhere along the trunking run except at a junction, remove full height partition, and replace with floor box partition and floor box lid. Optional Extras SBOX-500-FLTLID - SBOX-500-LOCK - Extra to supply lid with a flat instead of recessed lid Extra to supply lid and frame with a cam lock Base box depth Frame Length Frame Width All boxes are provided as standard with conduit knockouts for screed or cavity floors. All boxes can be combined with in screed or flush screed trunking systems. Base box cutout is 10mm larger than these frame sizes except for 55mm deep 8 The Art of
Specifiers Guide 500 Series Floor Box A highly adaptable, trimless floor box... A discreet, trimless box, ideal for carpet, vinyl or resin floors, that can be made to any size. The 500 series floor box offers a huge number of variations, to satisfy almost any site conditions. We stock a variety of standard sizes, but the box can be manufactured to any dimension required, making it a particularly good option for refurbishments. The box can be made to match existing sizes, and to fit existing floor screed trunking. If your required option is not shown here please call our team who would be happy to suggest alternatives. Outlet flap options Standard supplied with 1 flap for 1 or 2 compartment, 2 flaps for 3 compartment, and 3 flaps for 4 compartment. Lid options Standard lid suitable for any floor covering of 6.5mm (compressed) or less. We can also supply it with a flat lid, either galvanised or stainless steel. Recessed Flat Inner frame options Size Options All dimensions of the box can be altered to any value: Length, width, height. 2 standard heights of frames giving 27mm or 22mm plug top space. Height adjustable enabling perfect on site levelling. Outlet plates options The number of compartments of a box equals the number of plates it can fit. See separate sheet for available plates. Any plate can be made to order, just supply cutout details. Outlet plates can be dished to give more plug top space than the standard 27mm to allow for audio visual connections, and chargers. Base box options Any depth greater than 55mm 4 standard depths from 55mm to 120mm Feed type: conduit, screed trunking, busbar To order, please call 020 8683 1126, send a fax to 020 8689 7896 or email info@cableductuk.com Cable Management 9 30 Selhurst Road London SE25 5QF Telephone 020 8683 1126
500 Series floor box Buyers guide - Outlet plates All standard floor boxes use interchangeable outlet plates, one per compartment. Standard plates are shown below. Ref 501 Blank Plate Ref 576 2 x 5A sockets Ref 551 Schuko Euro socket Ref 577 Twin 13A & 1x5A Ref 554 Twin switched 13A Ref 586 1 x 2 gang outlet Ref 555 Twin unswitched 13A Ref 586D 1 x 2 gang dished 10mmm Ref 557 Single 5A Ref 558 2 x 1 gang Ref 588 3 x 13A switched sockets Ref 590 3 x 13A sockets Staggered power plates providing space for moulded plug tops Ref 559 2 x Euromod 50x50 Ref 591 4 x LJ6C apertures (22.4x36.4) Ref 561 Twin latching RCD Ref 591S 6 x LJ6C apertures Ref 562 Twin active reset RCD Ref 592 4 x Alphasnap (23.5x47.5) Ref 575 1 x 1 gang & 1 x 13A Ref 593 4 x LJ6C apertures angled plate Virtually any plate request can be accommodated, including non standard sockets, AV outlets and dished plates to provide increased plug top space For boxes 85mm or deeper only Standard outlets 22.4x36.4 for Hellermann Tyton, Modsnap, Austin LJ6C modules. Can be used with cat 6 for boxes of 85mm or deeper. Ref 592 Alphasnap aperture 23.5x47.5mm LJ6C modules available: SBOX-LJ6C BLANK - blanking module SBOX-DATA-CAT5E - Cat5e data module to fit type 91 plates SBOX-DATA-CAT6 - Cat6 unshielded data module to fit type 91 To order, please call 020 8683 1126, send a fax to 020 8689 7896 or email info@cableductuk.com www.cableductuk.com 10 The Art of
Cabling, Data Cable and AV Guide guide Cable trunking capacity guide 1. Cable capacity required For each size of cable multiply the number of cables by the relevant cable factor. Add these together for a total required cable capacity. 2. Trunking Capacity Calculate the available internal area of the trunking. The trunking must not be filled to more than 45% of its total capacity, reducing the capacity available for cables. See below for some common available trunking capacities. Conductor Type Solid Stranded Stranded Stranded Stranded Stranded Stranded C.S. Area (mm²) 1.0 1.5 2.5 4.0 6.0 10.0 16.0 PVC insulation 3.6 8.6 12.6 16.6 21.2 35.3 47.8 Thermosetting insulation 3.8 13.9 18.1 18.1 22.9 36.3 50.3 C20-50*50 C20-100*100 C20-150*150 U2-150*25 U3-225*25 FF4-150*25 FF13-330*65 available trunking capacity 1037 4252 9697 1501 2287 1417 9058 Capacity Example: Cables required are 36 x 16.0mm² stranded and 50 x 2.5mm² solid, both PVC insulated Required cable factor = 36 x 47.8 + 50 x 12.6 = 2350.8 These would fit in either 100*100 standard trunking, or in the FF13 floor trunking. For FF13 trunking note that this capacity is reduced if floor boxes are installed Data cables: Category 6 and 7 bend radius As the requirement for 10Gigabit Ethernet increases, more installations are considering Cat6A and Cat7 cabling. The minium bend radius for cables varies by manufacturer, foil wrapped shielded cables can increase the bend multiple. Typical requirements are shown below: Nominal Bend Minimum bend Diameter Multiple radius Cat 5e 4.5-6mm 4x ND 20-25mm Cat 6A UTP 7-9mm 4x ND 30-50mm Cat 7 STP 8-9mm 4-10x ND 50-100mm For this reason we recommend that floor boxes of 85mm or deeper are used for Cat6A applications, as this gives the cable 50mm bend radius even at the furthest outlet. We supply a range of data outlet plates to accept LJ6C, Alphasnap or Euromod modules. We also supply angled data plates Euromod outlet plate ref 59 Audio Visual A large range of connectors available There are a large range of 50x50mm modular AV accessories to fit our ref 59 plates, for example DVI, HDMI, RCA, USB, VGA or XLR C able Management 11 30 Selhurst Road London SE25 5QF Telephone 020 8683 1126
700 Series Floor Box - Brass Specifiers Guide The Premium brass floor box for any floor covering... The 700 series floor box offers an infinite number of variations, enabling it to satisfy any site conditions. We stock a variety of standard sizes, but any dimension can be made to any requirement. Lid options As standard with a recessed lid (to suit your floor covering ) Or with a flat lid Outlet flap options The only brass floor box with solid cast outlet flaps. It has an integral cast brass handle Standard as 1 satin finish outlet flap, more optional Also available in mirror polished Standard has Cableduct name on handle. Also available plain Satin polished Mirror polished Inner frame options Height adjustable inner frame ensures perfect on site levelling. Finish options As standard in polished brass Also optional lacquer surface finish Also available with a bronze surface finish Standard gives 29mm or 69mm plug top space. This can be custom made giving ample room for audio visual connections or phone chargers Size options: Any dimension can be altered to any value Standard square sizes from 150mm to 300mm Length Depth Width Frame Options: As standard without trim flange Optional trim flange available Standard Trim flange Standard rectangular sizes from 1 to 4 compartment We recommend a recess of 30mm or less for stone tiles due to the weight www.cableductuk.com 12 The Art of
Specifiers Guide 700 Series floor box - Stainless Steel The Premium stainless steel floor box for any floor covering... We recommend that you first choose the number and type of services in a box which will determine the minimum size of box required. The sub floor will determine the base box depth. The final floor material will determine the lid recess, trim flange and other requirements, and may also influence the choice of size to match tile sizes. Lid options As standard with a recessed lid (to suit your floor covering ) Or with a flat lid Outlet flap options The only steel floor box with solid cast outlet flaps with integral cast handle, both grade 316 stainless steel Standard as 1 satin finish outlet flap, more optional Also available in mirror polished Standard has Cableduct name on handle. We can also offer a plain handle Satin polished Mirror polished Finish options As standard in brushed stainless Outlet plate options The number of compartments of a box equals the number of plates it can fit. Any plate can be made to order, just supply cutout details. Also available powder coated or satin bronze finish Base box options Any depth greater than 65mm is possible Feed type - conduit, screed trunking, busbar Base can be designed to fit within the top frame if required, e.g. if the finished floor is already laid Note that the minimum overall depth from top of finished floor to bottom of base is 75mm Standard Retro fit Frame Options: As standard without trim flange Optional trim flange available Standard Trim flange We recommend a recess of 30mm or less for stone tiles due to the weight Cable Management 13 30 Selhurst Road London SE25 5QF Telephone 020 8683 1126
700 Series floor box Buyers Guide - Outlet Plates All standard floor boxes except the 7S6/8 fit interchangeable outlet plates, one per compartment Ref 501 Blank Plate Ref 576 2 x 5A sockets Ref 551 Schuko Euro socket Ref 577 Twin 13A & 1x5A Ref 554 Twin switched 13A Ref 555 Twin unswitched 13A Ref 586 1 x 2 gang outlet Ref 586D 1 x 2 gang dished 10mmm Staggered power plates providing space for moulded plug tops Ref 558 2 x 1 gang Ref 588 3 x 13A switched sockets Ref 559 2 x Euromod 50x50 Ref 590 3 x 13A sockets Ref 561 Twin latching RCD Ref 591 4 x LJ6C apertures (22.4x36.4) Ref 562 Twin active reset RCD Ref 592 4 x Alphasnap (23.5x47.5) Ref 575 1 x 1 gang & 1 x 13A Ref 593 4 x LJ6C apertures angled plate Virtually any plate request can be accommodated, including non standard sockets and dished plates to provide increased plug top space. Plates can also be supplied in stainless steel or brass. For boxes 85mm or deeper only Standard outlets 22.4x36.4 for Hellermann Tyton, Modsnap, Austin LJ6C modules. Can be used with cat 6 for boxes of 85mm or deeper. Ref 592 Alphasnap aperture 23.5x47.5mm LJ6C modules are available to be ordered separately: SBOX-LJ6C BLANK blanking module SBOX-DATA-CAT5E Cat5e data module to fit type 91 plates SBOX-DATA-CAT6 Cat6 UTP data module to fit type 91 Standard plates for the SBOX-7S 150x150mm square floor box: Ref 7RS-01 Blank Plate Ref 7RS-75W single switched socket Ref 7RS-59 Single Euromod 50x50 aperture Ref 7RS-91 2 x LJ6C apertures Ref 7RS-5amp single 5 amp socket www.cableductuk.com 14 The Art of
Buyers Guide 700 Series Floor Box The ordering product code of all standard sizes is shown below. Other sizes are available to order, please call our sales team to discuss. Unless specified otherwise, all boxes are supplied in the standard finish, to the lid recess that must be specified on ordering, with 20 and 25mm conduit knockout in the base box to suit either cavity floors or to be fixed remotely in screed floors. Bases are held in stock, tops are finished to order and made to your specific lid recess which must be specified on order. To order please call on 020 8683 1126, fax on 020 8689 7896 or email info@cableductuk.com Code Stainless Steel Brass Number of plates Frame size (mm) Base box depth (mm) Plug top space (mm) SBOX-7S6-STST SBOX-7S6-BR 1 150x150 65 29 SBOX-7S8-STST SBOX-7S8-BR 1 150x150 85 29 SBOX-7S2-STST SBOX-7S2-BR 1 150x150 120 69 SBOX-716-STST SBOX-716-BR 1 250x148 65 29 SBOX-718-STST SBOX-718-BR 1 250x148 85 29 SBOX-712-STST SBOX-712-BR 1 250x148 120 69 SBOX-726-STST SBOX-726-BR 2 233x250 65 29 SBOX-728-STST SBOX-728-BR 2 233x250 85 29 SBOX-722-STST SBOX-722-BR 2 233x250 120 69 SBOX-736-STST SBOX-736-BR 3 320x250 65 29 SBOX-738-STST SBOX-738-BR 3 320x250 85 29 SBOX-732-STST SBOX-732-BR 3 320x250 120 69 SBOX-706-STST SBOX-706-BR 3 300x300 65 29 SBOX-708-STST SBOX-708-BR 3 300x300 85 29 SBOX-702-STST SBOX-702-BR 3 300x300 120 69 SBOX-746-STST SBOX-746-BR 4 407x250 65 29 SBOX-748-STST SBOX-748-BR 4 407x250 85 29 SBOX-742-STST SBOX-742-BR 4 407x250 120 69 Standard finish - stainless steel shown ref 738 with 25mm lid recess Optional Extras: SBOX-700+ST SBOX-700+BR SBOX-700-BRONZE SBOX-700-CL-HAN SBOX-700-FL-MIR SBOX-700-FLANGE SBOX-700-LOCK SBOX-700-FLTLID SBOX-MIRROR SBOX-RETRO Extra to supply box in 2mm stainless steel, with 4mm thick infill plate to withstand larger loads Extra to supply box in 2mm brass, with 4mm thick infill plate to withstand larger loads Extra to supply a bronze surface finish to a brass box to achieve a dark brown antique bronze effect (picture shows with trim flange on frame) Extra to supply the handle without the Cableduct name Extra to supply lid with a mirror polished outlet flap Extra to supply frame with a trim flange Extra to supply lid and frame with a cam lock Extra to a flat instead of recessed lid (shown here with optional trim flange) Extra to supply lid with a mirror polished flap and a Mirror polished frame (usually required only on a trim frame) Extra to supply a base box and frame that sit within the top frame for fittings retrospectively into laid floors Minimum overall depth from top of finished floor to bottom of base is 75mm We recommend a recess of 30mm or less due to the weight of the lid when filled Note that the cut out required in the floor for the base box is 10mm larger than these frame sizes Standard materials - 1.5mm grade 304 satin polished stainless steel, or 1.5mm polished brass Cable Management 15 30 Selhurst Road London SE25 5QF Telephone 020 8683 1126
700 Series Round Floor Box Specifiers Guides The 700 round series floor box offers a huge number of variations, enabling it to satisfy almost any site conditions. The make up of the box is shown below, together with the options available. If your required option is not covered here please call our sales team who would be happy to suggest alternatives. Lid options Brass or stainless steel As standard with a recessed lid (lid recess to be any depth to suit your floor covering) or with a flat lid Size options Three standard diameters: 1) 127mm to fit a single socket 2) 193mm to fit 2 outlet plates Frame Options As standard without trim flange Optional trim flange available Outlet flap options The outlet flap is cast from the same material as the lid and frame Standard satin finish on the outlet flap, also available in mirror polished Standard handle contains Cableduct name. Also available without the name Base box options Depth (85 or 120 as standard, or any depth greater than 65mm is possible). Note 80mm minimum depth to top of finished floor Feed type - conduit (cavity or screed), in screed trunking Fitting type - as standard the lid & frame are height adjustable and sit within the outer box. The base is installed on the sub floor. The lid and frame adjust to be flush with the finished floor 3) 289mm to fit 3 outlet plates It is possible to have the base box and inner frame fitting entirely within the round frame. Please call to discuss. Inner frame options As standard gives 30mm plug top space for 65mm boxes, 30 or 40mm for 85mm boxes, and 70mm for 120 deep box. Any plug top space can be provided. www.cableductuk.com 16 The Art of
700 Buyers Series Guide Round Floor Box 700 Series Buyers Round Guide Floor - Boxes The ordering product code of all standard sizes is shown below. Other sizes available to order, please call our sales team to discuss. Unless specified otherwise, all boxes are supplied in the standard finish, to the lid recess that must be specified on ordering, with 20 and 25mm conduit knockout in the base box to suit either cavity floors or fixed remotely in screed floors. Bases are held in stock, tops are finished to order and made to your specific lid recess which must be specified on order. To order please call on 020 8683 1126, fax on 020 8689 7896 or email info@cableductuk.com Code Stainless Steel Brass Number of compartments Diameter (mm) Box size (mm) Base box depth (mm) Plug top space (mm) SBOX-7RS-65-ST SBOX-7RS-65-BR one 127 156 x 156 65 30 SBOX-7RS-85-ST SBOX-7RS-85-BR one 127 156 x 156 85 40 SBOX-7RS-120-ST SBOX-7RS-120-BR one 127 156 x 156 120 70 SBOX-7RO-85-ST SBOX-7RO-85-BR two 193 239x256 85 40 SBOX-7RO-120-ST SBOX-7RO-120-BR two 193 239x256 120 70 SBOX-7RL-65-ST SBOX-7RL-65-BR three 289 306x306 65 30 SBOX-7RL-85-ST SBOX-7RL-85-BR three 289 306x306 85 30 SBOX-7RL-120-ST SBOX-7RL-120-BR three 289 306x306 120 70 Standard finish stainless steel, shown 7RL recess 25mm The following dimensions can be adjusted for all standard floor boxes: Depth base box depth Standard finish brass, shown 7RS Lid recess in the lid for finished floor material plus any adhesive. Plug top the height between the closed lid and the outlet plate Optional Extras: SBOX-700-BRONZE Extra to supply a bronze surface finish to a brass box to achieve a dark brown antique bronze effect SBOX-700-CL-HAN Extra to supply the handle without the Cableduct name SBOX-700-FL-MIR SBOX-700-FLANGE SBOX-700-FLTLID Extra to supply lid with a mirror polished outlet flap Extra to supply frame with a trim flange Extra to supply lid with a flat instead of recessed lid SBOX-MIRROR SBOX-RETRO Extra to supply lid with a mirror polished flap and a Mirror polished frame (usually required only on a trim frame) Extra to supply the base box and inner frame in a hexagonal shape that fits entirely within the round diameter, required for retrofitting into existing floors or similar All boxes are suitable for screed or cavity floors, and as standard are supplied with 20mm and 25mm conduit knockouts in the base box. All boxes can also be combined with our screed trunking ranges, of in screed or flush screed type. Note that all levelling of the box must occur prior to the floor finish being laid, as once fitted the height adjustment screws are not easily accessible. Note the minimum overall depth from top of finished floor to bottom of base is 80mm We recommend a recess of 30mm or less due to the weight of the lid when filled Note that the standard round box fits within a larger base box. Where site conditions demand the base to be smaller than the round frame we can supply hexagonal bases, see SBOX-RETRO Cable Management 17 30 Selhurst Road London SE25 5QF Telephone 020 8683 1126
700 Series Round Floor Box Buyers Guide - Outlet Plates Plates for 127mm diameter box (1 per): Ref 7RS-01 Blank Plate Ref 7RS-75W single switched socket Ref 7RS-91 2 x LJ6C apertures Ref 7RS-59 Single Euromod 50x50 aperture Ref 7RS, diameter 127mm to accept a single socket.outlet Ref 7RS-5amp single 5 amp socket Plates for 193mm diameter box (2 per): Ref 7RO, diameter 193mm to accept 2 outlet plates (shown with optional trim flange) Ref 7RO-01 Blank Plate Ref 7RO-54 Twin switched socket Ref 7RO-76 2 x 5A sockets Plates for 289mm diameter box (3 per): Ref 7RO-61 Twin latched 13A RCD Ref 7RO-59 2 x Euromod 50x50 apertures Ref 7RO-91 4 x LJ6C apertures Ref 501 Blank Plate Ref 576 2 x 5A sockets Ref 7RL, diameter 289mm to accept 3 outlet plates Ref 551 Schuko Euro socket Ref 554 Twin switched 13A Ref 577 Twin 13A & 1x5A Ref 586 1 x 2 gang outlet Ref 555 Twin unswitched 13A Ref 586D 1 x 2 gang dished 10mmm Ref 558 2 x 1 gang Ref 588 3 x 13A switched sockets Ref 559 2 x Euromod 50x50 Ref 590 3 x 13A sockets Ref 561 Twin latching RCD Ref 591 4 x LJ6C apertures (22.4x36.4) Ref 562 Twin active reset RCD Ref 592 4 x Alphasnap (23.5x47.5) Ref 575 1 x 1 gang & 1 x 13A Ref 593 4 x LJ6C apertures angled plate Virtually any plate request can be accommodated, including non standard sockets and dished plates to provide increased plug top space. For boxes 85mm or deeper only Standard outlets 22.4x36.4 for Hellermann Tyton, Modsnap, Austin LJ6C modules. Can be used with cat 6 for boxes of 85mm or deeper. Ref 592 Alphasnap aperture 23.5x47.5mm LJ6C modules are available to be ordered separately; SBOX-DATA-CAT5E - CAT5E data module SBOX-DATA-CAT6 - CAT6 UTP data module www.cableductuk.com 18 The Art of
Bespoke Products What is bespoke The to Art others of Cable is standard Managment to us Case Study: Flexibility, by design For The Savill Building, Windsor Great Park it was important that the floor boxes blended in with the surrounding floor. To achieve this it was imperative that the edges of the box align perfectly with the edges of the planks. Cableduct was asked to provide a floor box that would give adjustability in 3 dimensions, that could be made to suit the 30mm deep oak planks. Cableduct's 700 series Stainless Steel floor box was used, altered to accommodate the building's unique requirements. Firstly, the overall width of the box was altered to suit the exact width of oak planks used. Secondly, the base was enlarged and an inner frame fabricated that would allow 20mm lateral movement, allowing perfect positioning. As with all standard boxes, an inner frame allowed height adjustability for accurate levelling. Box width made to suit plank size. 20mm adjustment in Y Height adjustable 20mm adjustment in X Quality Supplier to the most famous addresses in the world Buckingham Palace One Hyde Park Kensington Palace Windsor Great Park Harrods Savoy Hotel Chelsea Wharf Service We supply what you want, when you want it Large stocks of all standard products 40 years of experience supplying cable management products All made here in the UK so no long lead times Choice What is bespoke to others is standard to us We offer the largest range of floor boxes of any manufacturer If what you want isn t in this catalogue, we can make it Value Supplier to schools and universities across Britain University College London, specified supplier of Dado Trunking A large number of schools and academies around the country We design to your specification, without the high premiums usually associated with bespoke products. Cable Management 19 30 Selhurst Road London SE25 5QF Telephone 020 8683 1126
Cableduct has provided products to prestigious sites throughout London, across Britain and around the world The Shard 1 Hyde Park University College London Call us to discuss your requirements Imperial Wharf ICHQ Abu Dhabi Savoy Hotel The Art of Cable Management 30 Selhurst Road, South Norwood, London SE25 5QF Fax: 020 8689 7896 Telephone: 020 8683 1126 www.cableductuk.com