4L Series AC Line Rated Ceramic Disc Capacitors Class X, 76 V AC / Class Y, 5 V AC FEATURES Complies with IEC 6384-4, 4 th edition High reliability Radial leads High capacitance up to nf Singlelayer AC disc safety capacitors Material categorization: for definitions of compliance please see www.vishay.com/doc?999 QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class Ceramic Dielectric INSULATION RESISTANCE Min. F TOLERANCE ON CAPACITANCE ± %; ± % DISSIPATION FACTOR. % max. at khz; V CG, UJ, P3K, CERAMIC DIELECTRIC CG, UJ, P3K, (class ) X7R, (class ) CG, UJ, P3K, X7R, OPERATING TEMPERATURE RANGE - C to +5 C X7R, Voltage (V AC ) 5 76 5 76 Min. Capacitance (pf) 68 Max. Capacitance (pf) 47 Mounting Radial CLIMATIC CATEGORY ACC. TO EN 668-5/5/ APPLICATIONS X, Y according to IEC 6384-4.4 Across-the-line Line by-pass Antenna coupling DESIGN The capacitors consist of a ceramic disc of which both sides are silver-plated. Connection leads are made of tinned copper having a diameter of.3" (.8 mm). The capacitors may be supplied with radial kinked or straight leads having a lead spacing of.375" (9.5 mm). The standard tolerances are ± % or ± %. Coating is made of flame-retardant epoxy resin in accordance with UL 94 V-. CAPACITANCE RANGE pf to nf RATED VOLTAGE IEC 6384-4.4: X: 76 V AC, 5 Hz Y: 5 V AC, 5 Hz DIELECTRIC STRENGTH BETWEEN LEADS Component test: V AC, 5 Hz, s As repeated test admissible only once with: 36 V AC, 5 Hz, s Random sampling test (destructive test): V AC, 5 Hz, 6 s DIELECTRIC STRENGTH OF BODY INSULATION V AC, 5 Hz, 6 s (destructive test) Revision: 7-Jun-6 Document Number: 3 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
4L Series DIMENSIONS in inches (millimeters).5 min. (3) LO 4-R.5 max. (3.) T max. D max..5 max. (3.) Tinned Copper Leads Ø T max. D max..65 ±.5 (4.3 ± 3.) ORDERING INFORMATION, CERAMIC X / Y CAPACITORS 4L WIRE SIZE C TOL. D max. T max. LEAD SPACE DIAMETER THICKNESS (pf) (%) INCH (mm) INCH (mm) AWG INCH (mm) INCH (mm) ± mm Notes Alternate lead spacings are available bulk or tape and reel on request. Minimum lead clearance according to IEC 6384-4:.35" (8 mm) LO LEAD OFFSET INCH (mm) ±.5 mm ORDERING CODE CG ±.3 (8.4).95 (5.).3 (.8).375 (9.5).98 (.5) 4LQ-R UJ 5 ±.3 (8.4). (5.3).3 (.8).375 (9.5). (.8) 4LQ5-R P3K ±.3 (8.4).9 (4.8).3 (.8).375 (9.5).94 (.4) 4LQ-R 33 ±.3 (8.4). (5.).3 (.8).375 (9.5). (.6) 4LQ33-R 47 ±.3 (8.4).8 (4.6).3 (.8).375 (9.5).83 (.) 4LQ47-R X7R 68. (5.6). (3.) 4LQ68-R. (5.6). (3.) 4LT-R 5 ±.3 (8.4).35 (6.).3 (.8).375 (9.5).38 (3.5) 4LT5-R.35 (6.).38 (3.5) 4LT-R 3.5 (5.7).6 (3.) 4LT33-R 47.3 (8.4). (5.8). (3.3) 4LT47-R 56.3 (8.4). (5.8). (3.3) 4LT56-R 68.3 (8.4).35 (6.).38 (3.5) 4LT68-R.365 (9.3).5 (5.7).6 (3.) 4LD-R 5.365 (9.3). (5.6).8 (3.) 4LD5-R. (.). (5.6).8 (3.) 4LD-R.4 (.9).5 (5.7).6 (3.) 4LD-R 7.46 (.7).5 (5.7).6 (3.) 4LD7-R 8.46 (.7). (5.6). (3.) 4LD8-R.49 (.4).5 (5.7).6 (3.) 4LD-R.49 (.4). (5.6). (3.) 4LD3-R 3 ±.49 (.9). (5.6).3 (.8).375 (9.5). (3.) 4LD33-R 39.5 (3.5). (5.6).8 (3.) 4LD39-R.5 (3.5). (5.6). (3.) 4LD-R 47.6 (5.7). (5.8). (3.3) 4LD47-R 5.6 (5.7).5 (5.7).6 (3.) 4LD5-R 55.68 (7.3). (5.8).34 (3.4) 4LD55-R 56.68 (7.3). (5.8).34 (3.4) 4LD56-R 68.7 (8.3).35 (6.).38 (3.5) 4LD68-R 8.7 (8.3). (5.6). (3.) 4LD8-R 9.79 (.).5 (5.7).6 (3.) 4LD9-R.85 (.6). (5.8).34 (3.4) 4-R.85 (.6).355 (9.).34 (3.4) 4-R TAPE AND REEL OPTIONS Part number codes and specifications for tape and reel packaging are found in the general information document - find web-link below. Revision: 7-Jun-6 Document Number: 3 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
LEAKAGE CURRENT VS. VOLTAGE (Typical) 4L Series INSERTION LOSS VS. FREQUENCY (Typical) Leakage Current (µa) RMS 8 6 4LQ47-R 4LQ33-R 4LQ-R 4LQ5-R 4LQ-R 3 4 5 5 4LQ47-R 4LQ33-R 4LQ-R 4LQ5-R 4LQ-R.9.8.7 4LT68-R.6 4LT56-R.5 4LT47-R.4 4LT33-R.3 4LT-R. 4LT5-R. 4LT-R 4LQ68-R 5 4LT68-R 4LT56-R 4LT47-R 4LT33-R 4LQ68-R 4LT-R 4LT5-R 4LT-R 3.5.5.5 4LD3-R 4LD-R 4LD8-R 4LD7-R 4LD-R 4LD-R 4LD5-R 4LD-R 4LT68-R 4LT56-R 4LT47-R 5 4LD3-R 4LD-R 4LD8-R 4LD7-R 4LD-R 4LD5-R 4LD-R 4LD-R 5 5 5 35. 6 4 8 6 4 5 Hz, C 5 5 5 35 4-R 4-R 4LD8-R 4LD68-R 4LD56-R 4LD47-R 4LD39-R 4LD-R 5 6 7 8 9.. 4LD33-R 4LD39-R 4LD-R 4LD47-R 4LD5-R 4LD55-R 4LD56-R 4LD68-R 4LD8-R 4LD9-R 4-R Revision: 7-Jun-6 3 Document Number: 3 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
4L Series APPROVA IEC 6384-4.4 - Safety tests This approval together with CB test certificate substitutes all national approvals. CB Certificate Y-capacitor: CB test certificate: DE-5645/A pf to nf 5 V AC X-capacitor: CB test certificate: DE-5645/A pf to nf 76 V AC VDE Y-capacitor: VDE marks approval: 3985 pf to nf 5 V AC X-capacitor: VDE marks approval: 3985 pf to nf V AC DIN EN 6384-4 VDE 565--:6-4 - Safety tests Underwriters Laboratories Inc. Y-capacitor: UL test certificate: E9964 pf to nf 5 V AC X-capacitor: UL test certificate: E9964 pf to nf 76 V AC UL 6384-4, CSA E6384-:3, CSA E6384-4:9 Fixed capacitors for electromagnetic interference suppression and connection to the supply mains. MARKING Samples pf to nf nf 7M 4L Y 5 ~ X ~ CM 5 C CM 3M 4L IEC 6384-4 Y 5 ~ X 76 ~ RELATED DOCUMENTS General Information CB Test Certificate VDE Marks Approval UL Test Certificate www.vishay.com/doc?3 www.vishay.com/doc?37 www.vishay.com/doc?38 www.vishay.com/doc?39 Revision: 7-Jun-6 4 Document Number: 3 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 3-Jun-6 Document Number: 9