Thick Film Resistor Networks, Military, MIL-PRF Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP
|
|
- Hilary James
- 8 years ago
- Views:
Transcription
1 MDM (Military M831/1 and /2) Thick Film Resistor Networks, Military, MIL-PRF-831 Qualified, Type RZ1 and RZ2 Dual-In-Line, Molded DIP STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL/ PIN NO. MIL STYLE MIL SPEC. SHEET SCHEMATIC POWER RATING ELEMENT P 7 C W POWER RATING PACKAGE P 7 C W 1 (B) to 1M MDM1 RZ1 1 3 (A) to 1M 5 (J) Consult factory 1 (B) to 1M MDM16 RZ2 2 3 (A) to 1M 5 (J).5 1. Consult factory Notes (1) K = ± 1 ppm/ C; M = ± 3 ppm/ C (2) ± 2 % standard, ± 1 % and ± 5 % available FEATURES Isolated, bussed and dual terminator schematics available MIL-PRF-831 qualified Epoxy molded construction All device leads are hot-solder dipped Available in tube pack TCR available in K (± 1 ppm/ C) or M (± 3 ppm/ C) depending on style 1 % screen tested per group A, subgroup 1 of MIL-PRF-831 All devices are capable of passing the MIL-STD-22, method 21, condition D, Resistance to Soldering Heat test RANGE TOLERANCE (2) ± % TEMPERATURE COEFFICIENT (1) (-55 C to +125 C) ± ppm/ C WEIGHT g 1, 2, 5 1, , 2, 5 1, GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M8311M221GBD (preferred part numbering format) M M G B D M831 1 = 1 pin K = 1 ppm 3 digit significant F = ± 1 % A = Isolated D = Tin/lead, tube 2 = 16 pin M = 3 ppm figure, followed G = ± 2 % B = Bussed DSL = Tin/lead, tube, by a multiplier J = ± 5 % single lot date code 1R = = 33 k 1 = 1 M Historical Part Number Example: M8311M221GB (will continue to be accepted) M831 1 M 221 G B D New Global Part Numbering: M8312KA1GJD (preferred part numbering format) M K A 1 G J D M831 1 = 1 pin K = 1 ppm Per Std. F = ± 1 % J = Dual D = Tin/lead, tube 2 = 16 pin M = 3 ppm MIL. Spec. G = ± 2 % terminator DSL = Tin/lead, tube, (see Impedance J = ± 5 % single lot date code Codes table) Historical Part Number Example: M8312KA1GJ (will continue to be accepted) M831 2 K A1 G J D Note For additional information on packaging, refer to the Through-Hole Network Packaging document ( Revision: 12-Sep-13 1 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
2 MDM (Military M831/1 and /2) DIMENSIONS in inches (millimeters) A ±.1 (.25) TYP.3 (.762).31 ±.1 (7.87 ±.25).25 ±.5 (6.35 ±.127).12 ±.5 (3.5 ±.127) Identification.75 ±.15 (1.91 ±.381).18 ±.3 (.57 ±.76) ( ) ( ).1 ±.1 (2.5 ±.25) Non-Accumulative Tol. C Spaces B ±.1 (.25).5 ±.5 (1.27 ±.127).29 Min..32 Nom..36 Max. (7.37 Min Nom. 9.1 Max.) VISHAY DALE MODEL A B C MDM1.75 (19.5).6 (15.2) 6 MDM16.85 (21.59).7 (17.78) 7 IMPEDANCE CODES CODE R 1 ( ) R 2 ( ) CODE R 1 ( ) R 2 ( ) A A A A A A12 1.5K 3.3K A A13 3K 6.2K A A A A A A A A K A A K TECHNICAL SPECIFICATIONS PARAMETER UNIT MDM SERIES Maximum Operating Voltage V DC 1 Voltage Coefficient of Resistance V eff < 5 ppm Dielectric Strength V AC 2 per min Insulation Resistance 1 M Operating Temperature Range C -55 to +125 Storage Temperature Range C -55 to +15 MECHANICAL SPECIFICATIONS Marking Resistance to Solvents Solderability Body Terminals Permanency testing per MIL-PRF-831 Per MIL-PRF-831 Molded epoxy Copper alloy, hot-solder dipped Revision: 12-Sep-13 2 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
3 MDM (Military M831/1 and /2) CIRCUIT APPLICATIONS 1 Schematic MDM11 (M8311xxxxxxB) MDM161 (M8312xxxxxxB) 13 or 15 resistors with one pin common The MDMxx1 provides the user with a choice of 13 or 15 nominally equal resistors, each connected to a common pin. Commonly used in the following applications: MOS/ROM Pull-up/Pull-down Open Collector Pull-up Wired OR Pull-up Power Driven Pull-up TTL Input Pull-down Digital Pulse Squaring TTL Unused Gate Pull-up High Speed Parallel Pull-up 3 Schematic MDM13 (M8311xxxxxxA) MDM163 (M8312xxxxxxA) 7 or 8 isolated resistors The MDMxx3 provides the user with a choice of 7 or 8 nominally equal resistors, with each resistor isolated from all others. Commonly used in the following applications: 5 Schematic MDM11 MDM161 MDM13 MDM163 Wired OR Pull-up Power Driven Pull-up Power Gate Pull-up Line Termination Long-line Impedance Balancing LED Current Limiting ECL Output Pull-down TTL Input Pull-down R1 R1 R1 R1 R1 R1 R1 R2 R2 R2 R2 R2 R2 R2 R1 R1 R1 R1 R1 R1 R1 R2 R2 R2 R2 R2 R2 R2 MDM15 (M8311xxxxxxJ) MDM165 (M8312xxxxxxJ) 12 or 1 resistor pairs The MDMxx5 provides the user with a choice of 12 or 1 pairs of R1/R2 resistor values for pulse squaring and TTL dual-line terminating requirements. MDM15, MDM165 CAGE CODE: DERATING 1 Schematic 3 Schematic 5 Schematic Single Resisto r Single Resisto r Single Resistor Revision: 12-Sep-13 3 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
4 MDM (Military M831/1 and /2) PERFORMANCE TEST Power Conditioning CONDITIONS 1.5 x rated power, applied 1.5 h ON and.5 h OFF for 1 h ± h at +25 C ambient temperature MAX. R (TYPICAL TEST LOTS) ±.5 % R Thermal Shock 5 cycles between -65 C and +125 C ±.5 % R Short Time Overload 2.5 x rated working voltage for 5 s Low Temperature Operation 5 min at full rated working voltage at -65 C ±.25 % R (Char. K) ±.5 % R (Char. M) ±.25 % R (Char. K) ±.5 % R (Char. M) Moisture Resistance 2 h with humidity ranging from 8 % RH to 98 % RH ±.5 % R Resistance to Soldering Heat Leads immersed in +26 C solder to within 1/16" of body for 1 s ±.25 % R Shock Total of 18 shocks at 1 g s ±.25 % R Vibration 12 h at maximum of 2 g s between 1 Hz and 2 Hz ±.25 % R Load Life 1 h at +7 C, rated power applied 1.5 h ON,.5 h OFF for full 1 h period ±.5 % R (Char. K) ± 2. % R (Char. M) Terminal Strength.5 pound pull for 3 s ±.25 % R Insulation Resistance 1 M (minimum) - Dielectric Withstanding Voltage No evidence of arcing or damage (2 V RMS for 1 min) - Revision: 12-Sep-13 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
5 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 211/65/EU of The European Parliament and of the Council of June 8, 211 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 22/95/EC. We confirm that all the products identified as being compliant to Directive 22/95/EC conform to Directive 211/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS79A standards. Please note that some Vishay documentation may still make reference to the IEC definition. We confirm that all the products identified as being compliant to IEC conform to JEDEC JS79A standards. Revision: 2-Oct-12 1 Document Number: 91
Thick Film Resistor Networks, Dual-In-Line, Molded DIP
Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick
More informationMetal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL
Metal Film Resistors, Military, Qualified, Precision, Type RN and Qualified, Type RL FEATURES Very low noise (- 40 db) Very low voltage coefficient (5 ppm/v) Controlled temperature coefficient Flame retardant
More informationInsulated Precision Wirewound Resistors Axial Leads
Insulated Precision Wirewound Resistors Axial Leads In wirewound precision resistors, the series holds a leading position in professional applications whenever an excellent stability of the ohmic value
More informationPulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationHigh Speed Infrared Emitting Diode, 870 nm, GaAlAs Double Hetero
TSFF55 High Speed Infrared Emitting Diode, 87 nm, GaAlAs Double Hetero 26 DESCRIPTION TSFF55 is an infrared, 87 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high
More informationMetal Film Resistors, Industrial, Flameproof
End of Life - August 13 Metal Film Resistors, Industrial, Flameproof STANDARD ELECTRICAL SPECIFICATIONS FEATURES Small physical size Low cost resistors have the ability to withstand overloads up to times
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material
More informationStandard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A
Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A 95PF(R)... DO-203AB (DO-5) PRODUCT SUMMARY I F(AV) Package Circuit configuration 95PF(R)...W DO-203AB (DO-5) 95 A DO-203AB (DO-5) Single
More informationMetal Film Resistors, Industrial, Precision
Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Available Excellent high frequency characteristics Exceptionally
More informationSuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal
SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode
More informationMetal Film Resistors, Non-Magnetic, Industrial, Precision
Metal Film Resistors, Non-Magnetic, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics
More informationPulse Proof, High Power Thick Film Chip Resistors
Pulse Proof, High Power Thick Film Chip Resistors STANDARD ELTRICAL SPIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE U max. AC/DC -HP e3 FTURES Excellent
More informationSchottky Rectifier, 100 A
Schottky Rectifier, A VS-BGQ Cathode Anode PowerTab PRODUCT SUMMARY Package PowerTab I F(AV) A V R V V F at I F 0.82 V I RM 180 ma at 125 C T J max. 175 C Diode variation Single die E AS 9 mj FEATURES
More informationHigh Performance Schottky Rectifier, 1 A
High Performance Schottky Rectifier, A VS-MQNPbF Cathode Anode DO-24AC (SMA) PRODUCT SUMMARY Package DO-24AC (SMA) I F(AV) A V R V V F at I F.78 V I RM ma at 25 C T J max. 5 C Diode variation Single die
More informationHigh Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
More informationStandard Recovery Diodes (Hockey PUK), 2100 A
Standard Recovery Diodes (Hockey PUK), 2 A VS-SD10C..K Series DO-200AC (K-PUK) PRODUCT SUMMARY I F(AV) 2 A Package DO-200AC (K-PUK) Circuit configuration Single diode FEATURES Wide current range High voltage
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs
TSAL51 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 96 1155 TSAL51 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power, molded in a blue-gray plastic
More informationStandard Recovery Diodes, (Stud Version), 40 A
Standard Recovery Diodes, (Stud ersion), 40 A S- FEATURES High surge current capability Stud cathode and stud anode version Leaded version available DO-203AB (DO-5) PRODUCT SUMMARY I F(A) 40 A Package
More informationSMD PTC - Nickel Thin Film Linear Thermistors
SMD PTC - Nickel Thin Film Linear Thermistors Notes (1) Contact if closer TCR lot tolerance is desired. (2) Other R 25 -values and tolerances are available upon request. (3) Rated continuous working voltage
More informationWirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount
Wirewound Resistors, Industrial Power, Aluminum Housed, hassis Mount FEATURES Molded construction for total environmental protection omplete welded construction Meets applicable requirements of MIL-PRF-18546
More informationMetal Film Resistors, Pulse Withstanding Protective
End of Life - August 213 www.vishay.com Metal Film Resistors, Pulse Withstanding Protective STANDARD ELECTRICAL SPECIFICATIONS GLOBAL HISTORICAL POWER RATING P 7 C W FEATURES Special design provides lightning
More informationThick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM
Thick Film Chip Resistors, Military/Established Reliability -PRF-55342 Qualified, Type RM MATERIAL SPECIFICATIONS Resistive element Ruthenium oxide Encapsulation Epoxy Substrate 96 % alumina Termination
More informationSurface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
More informationAluminum Electrolytic Capacitors Power Economic Printed Wiring
Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated
More informationNTC Thermistors, Radial Leaded and Coated
M, C, T NTC Thermistors, Radial Leaded and Coated FEATURES Small size - conformally coated Wide resistance range Available in 11 different R-T curves Available in point matched and curve tracking precision
More informationMetal Film Resistors, Military, MIL-R-10509 Qualified, Type RN and MIL-PRF-22684 Qualified, Type RL
CMF (Military RN and RL) Metal Film Resistors, Military, Qualified, Type RN and Qualified, Type RL FEATURES Very low noise (- 40 db) Very low voltage coefficient (5 ppm/v) Controlled temperature coefficient
More informationOptocoupler, Phototransistor Output, with Base Connection
Optocoupler, Phototransistor Output, with Base Connection FEATURES i794-4 DESCRIPTION This datasheet presents five families of Vishay industry standard single channel phototransistor couplers. These families
More informationMetal Film Resistors, Industrial, Precision
CMF Industrial Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics
More informationAluminum Electrolytic Capacitors Power Eurodin Printed Wiring
Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 00 0 Nominal case size (Ø D x L in mm) x 0 to 0 x 00 Rated capacitance range 0 μf to
More informationHigh Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
More informationPower MOSFET FEATURES. IRF520PbF SiHF520-E3 IRF520 SiHF520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 0.7 Q g (Max.) (nc) 16 Q gs (nc) 4.4 Q gd (nc) 7.7 Configuration Single TO0AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel MOSFET
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series Non inductive Easy
More informationHigh-Bandwidth, Low Voltage, Dual SPDT Analog Switches
DG, DG High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DESCRIPTION The DG/DG are monolithic CMOS dual single-pole/double-throw (SPDT) analog switchs. They are specifically designed for low-voltage,
More informationPower MOSFET. IRF9520PbF SiHF9520-E3 IRF9520 SiHF9520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS - 100 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 10 V 0.60 Q g (Max.) (nc) 18 Q gs (nc) 3.0 Q gd (nc) 9.0 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G S D PChannel
More informationKnob Potentiometer with Switch
Knob Potentiometer with Switch The is a revolutionary concept in panel mounted potentiometers. This unique design consists of a knob driving and incorporating a cermet potentiometer. Only the mounting
More informationDG2706. High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch. Vishay Siliconix DESCRIPTION FEATURES APPLICATIONS
High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch DESCRIPTION The DG2706 is a high speed, low voltage, low On-resistance, quad SPDT (single pole double throw) analog switch. It operates from a.6
More informationPrecision Surface Mount Resistors Wirewound or Metal Film Technologies
Precision Surface Mount Resists irewound Metal Film Technologies FEATURES Accding to CECC 40402-801 (wirewound) ide range of ohmic values (0.04 to 1 M) Low temperature coefficient (± 25 ppm/ C available)
More informationFEATURES 200 % 175 % 150 % 125 % 100 % 75 % 50 % 25 %
Ultra High Precision Z-Foil Resistor with TCR of ± 0.05 ppm/ C, PCR of 5 ppm at Rated Power, Tolerance of ± 0.005 % and Load Life Stability of ± 0.005 % INDUSTRY BREAKTHROUGH Any value at any tolerance
More informationKnob Potentiometer FEATURES. P16NP P16NM Panel Cutout. Thickness nut 2 mm washer 1.5 mm. Panel sealing ring 12 wrench Thread M10 x 0.75 10.2 9.
Knob Potentiometer P6, PA6 FEATURES Test according to CECC 4000 or IEC 60393- P6 - Version for professional and industrial applications (cermet) W at 40 C PA6 - Version for professional audio applications
More information700 MHz, -3 db Bandwidth; Dual SPDT Analog Switch
7 MHz, -3 db Bandwidth; Dual SPDT Analog Switch DESCRIPTION is a low R ON, high bandwidth analog switch configured in dual SPDT. It achieves 5.5 Ω switch on resistance, greater than 7 MHz -3 db bandwidth
More informationPower MOSFET FEATURES. IRF740PbF SiHF740-E3 IRF740 SiHF740. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 400 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 400 R DS(on) (Ω) = 0.55 Q g (Max.) (nc) 63 Q gs (nc) 9.0 Q gd (nc) 3 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of
More informationHigh Surge Axial Cemented Wirewound Resistors
High Surge Axial Cemented Wirewound Resistors FEATURES High voltage surge (up to 12 kv) withstanding capability Non flammable silicon cement coating High grade ceramic core Material categorization: for
More informationStandard Thick Film Chip Resistors
Standard Thick Film Chip Resistors FEATURES Stability R/R = 1 % for 00 h at 70 C 2 mm pitch packaging option for size Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free
More informationAluminum Electrolytic Capacitors Axial Miniature, Long-Life
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38
More informationDual P-Channel 2.5 V (G-S) MOSFET
Si593DC Dual P-Channel.5 V (G-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).55 at V GS = -.5 V ±.9 -.8 at V GS = - 3.6 V ±.7.6 at V GS = -.5 V ±. FEATURES Halogen-free According to IEC 69-- Definition
More informationElectrical Double Layer Energy Storage Capacitors Power and Energy Versions
Electrical Double Layer Energy Storage Capacitors Power and Energy Versions FEATURES Polarized energy storage capacitor with high capacity and energy density Energy version with high stability available
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC / Class Y1, 500 V AC
4L Series AC Line Rated Ceramic Disc Capacitors Class X, 76 V AC / Class Y, 5 V AC FEATURES Complies with IEC 6384-4, 4 th edition High reliability Radial leads High capacitance up to nf Singlelayer AC
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8583 BPW34 is a PIN photodiode with high speed and high radiant sensitivity in miniature, flat, top view, clear plastic package. It is sensitive to visible and near
More informationESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips
ESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips thick film chip resistors are specially designed to meet the requirements of the ESA 4001/026 specification. They have undergone the
More informationOptocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package
ILD25T, ILD26T, ILD27T, ILD211T, ILD213T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package i17925 A1 C2 A3 C4 i17918-2 8C 7E 6C 5E DESCRIPTION The ILD25T, ILD26T, ILD27T, ILD211T, and ILD213T
More informationSchottky Rectifier, 1.0 A
Schottky Rectifier, 1.0 A VS-BQ060PbF Vishay High Power Products FEATURES Small foot print, surface mountable Low forward voltage drop SMB Cathode Anode High frequency operation Guard ring for enhanced
More informationSMD Aluminum Solid Capacitors with Conductive Polymer
SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package
More informationDG2515, DG2516. 3-Ω, 235-MHz Bandwidth, Dual SPDT Analog Switch. Vishay Siliconix. Not for New Design. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS
Not for New Design DG, DG -Ω, -MHz Bandwidth, Dual SPDT Analog Switch DESCRIPTION The DG, DG are low-voltage dual single-pole/ double-throw monolithic CMOS analog switches. Designed to operate from.8 V
More informationPower MOSFET FEATURES. IRF540PbF SiHF540-E3 IRF540 SiHF540. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 0.077 Q g (Max.) (nc) 72 Q gs (nc) 11 Q gd (nc) 32 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel MOSFET
More informationOptocoupler, Phototransistor Output, with Base Connection, 300 V BV CEO
SFH64 Optocoupler, Phototransistor Output, with Base Connection, 3 V BV CEO i1794-3 DESCRIPTION The SFH64 is an optocoupler with very high BV CER, a minimum of 3 V. It is intended for telecommunications
More informationSolid Tantalum Surface Mount Capacitors TANTAMOUNT, Molded Case, Low ESR
Solid Tantalum Surface Mount Capacitors TANTAMOUNT, Molded Case, Low ESR Effective September 2005, new capacitor ratings will not be added to the series. All new ratings are available in the TR3 series.
More information1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer
1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer FEATURES Robust construction High rotational life (50 000 cycles) Up to three sections PC support plates Rotary switches and solder lugs terminals
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationHigh Ohmic/High Voltage Metal Glaze Leaded Resistors
VR37 High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
More informationOptocoupler, Phototransistor Output, with Base Connection
4N25, 4N26, 4N27, 4N28 Optocoupler, Phototransistor Output, FEATURES A 6 B Isolation test voltage 5000 V RMS Interfaces with common logic families C 2 5 C Input-output coupling capacitance < pf NC 3 4
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8632 is a PIN photodiode with high speed and high radiant sensitivity in a clear, side view plastic package. It is sensitive to visible and near infrared radiation.
More informationAluminum Capacitors Solid Axial
SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range
More informationAC and Pulse Film Foil Capacitors KP Radial Potted Type
AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions
More informationFEATURES BODY DIA. MAX. Type M AWG 30: 0.0100 [0.254] Type C AWG 28: 0.0126 [0.320] Type T AWG 30: 0.0100 [0.254]
M, C, T NTC Thermistors, Coated FEATURES Small size - conformally coated. Wide resistance range. Available in 11 different R-T curves. DESCRIPTION Models M, C, and T are conformally coated, leaded thermistors
More informationPower MOSFET FEATURES. IRF9640PbF SiHF9640-E3 IRF9640 SiHF9640
Power MOSFET PRODUCT SUMMARY V DS (V) 200 R DS(on) (Ω) = 10 V 0.50 Q g (Max.) (nc) 44 Q gs (nc) 7.1 Q gd (nc) 27 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G S D
More informationAluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability 048 RML 48 RUS lower longer life 36 RVI miniaturize 50 RMI high vibration FEATURES Very long useful life: 7000
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications FEATURES AEC-Q200 qualified with PPAP available Available in 0402 to 1812 body size Three dielectric materials AgPd termination
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 1 2 Ceramic Dielectric U2J U2J Y5S, Y5U Y5S, Y5U Voltage (V AC ) 500 760
More informationP-Channel 20 V (D-S) MOSFET
Si30CDS P-Channel 0 V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) - 0 0. at V GS = - 4.5 V - 3. 0.4 at V GS = -.5 V -.7 3.3 nc TO-36 (SOT-3) FEATURES Halogen-free According
More informationSmall Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box
More informationHigh Ohmic/High Voltage Metal Film Leaded Resistors
, High Ohmic/High Voltage FEATURES Metal film technology High pulse loading (up to 10 kv) capability Small size (0207/0411) Compatible with lead (Pb)-free and lead containing soldering processes Compliant
More informationProfessional Thin Film MELF Resistors
,, - Professional Professional Thin Film MELF Resistors, and professional thin film MELF resistors are the perfect choice for most fields of rn professional electronics where reliability and stability
More informationOptocoupler, Phototransistor Output, AC Input
Optocoupler, Phototransistor Output, AC Input DESCRIPTION The SFH62A (DIP) and SFH626 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have
More informationOptocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package
Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package FEATURES A 4 C Low profile package High collector emitter voltage, V CEO = 8 V 7295-6 DESCRIPTION The has a GaAs infrared
More information1 Form A Solid State Relay
1 Form A Solid State Relay Vishay Semiconductors DIP i1791- SMD DESCRIPTION Vishay solid state relays (SSRs) are miniature, optically coupled relays with high-voltage MOSFET outputs. The LH1518 relays
More informationNTC Thermistors, Mini Lug Sensors
NTC Thermistors, Mini Lug Sensors QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 C 10K to 47K Tolerance on R 25 -value ± 2 to ± 3 % B 25/85 -value 3740 to 3984 K Tolerance on B 25/85
More informationPower MOSFET FEATURES. IRFSL11N50APbF SiHFSL11N50A-E3. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 500 V Gate-Source Voltage V GS ± 30
Power MOFET IRFL11N50, ihfl11n50 PRODUCT UMMRY V D (V) 500 R D(on) ( ) V G = 10 V 0.55 Q g (Max.) (nc) 51 Q gs (nc) 12 Q gd (nc) 23 Configuration ingle I 2 PK (TO262) G D FETURE Dynamic dv/dt Rating Repetitive
More informationSIL Resistor Network. Resistors. Electrical. Environmental. L Series. Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant
Resistors SIL Resistor Network Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Electrical Standard Resistance
More information1 Form A Solid State Relay
Form A Solid State Relay VOAT, VOAABTR FEATURES 9 S S DC S' 3 S' High speed SSR - t on /t off < 8 μs Maximum R ON. Isolation test voltage 3 V RMS Load voltage V Load current A DC configuration DIP- package
More informationHigh Stability - High Temperature (230 C) Thin Film Wraparound Chip Resistors, Sulfur Resistant
High Stability - High Temperature (230 C) Thin Film Wraparound Chip Resistors, Sulfur Resistant INTRODUCTION For applications such as down hole applications, the need for parts able to withstand very severe
More informationSMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
More information1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.
TRANSZORB Transient Voltage Suppressors Case Style.5KE FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 500 W peak pulse power capability with a /0 μs waveform, repetitive
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Power Infrared Emitting Diode, 94 nm, GaAlAs, MQW DESCRIPTION 94 8389 is an infrared, 94 nm emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed molded
More informationP-Channel 20-V (D-S) MOSFET
Si33DS P-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).39 at V GS = -.5 V -.7 -.5 at V GS = -.5 V -..68 at V GS = -.8 V - 3.5 FEATURES Halogen-free According to IEC 69-- Available
More informationLow Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
More informationUltrabright White LED, Ø 3 mm
Ultrabright White LED, Ø 3 mm DESCRIPTION The VLHW41 series is a clear, untinted 3 mm LED for high end applications where supreme luminous intensity is required. These lamps utilize the highly developed
More informationSilicon NPN Phototransistor
Silicon NPN Phototransistor DESCRIPTION 7 is a silicon NPN phototransistor with high radiant sensitivity in black, T-1¾ plastic package with base terminal and daylight blocking filter. Filter bandwidth
More informationMBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional www.vishay.com. Professional Metal Film Leaded Resistors
,, - Professional Professional Metal Film Leaded Resistors DESCRIPTION,, and professional leaded thin film resistors are the general purpose resistor for all fields of professional electronics where reliability
More informationSilicon PIN Photodiode
VEMD940F Silicon PIN Photodiode DESCRIPTION VEMD940F is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is
More informationHigh Ohmic (up to 68 MΩ)/ High Voltage (up to 10 kv) Resistors
High Ohmic (up to 68 MΩ)/ A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to the end-caps.
More informationPhotovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay
Photovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay i7966_6 Turn Off FEATURES Open circuit voltage at I F = ma, 8. V typical Short circuit current at I F = ma, 5 μa typical Isolation
More informationDual Common-Cathode Ultrafast Plastic Rectifier
(F,B)6AT thru (F,B)6JT Dual Common-Cathode Ultrafast Plastic Rectifier TO-0AB 6xT PIN PIN 3 PIN CASE 3 TO-63AB ITO-0AB F6xT PIN PIN 3 PIN 3 FEATURES Glass passivated chip junction Ultrafast recovery time
More informationOptocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package
Optocoupler, Photodarlington Output, i179042 DESCRIPTION A1 C 2 A3 C4 8 C 7E 6C 5E The ILD233T is a high current transfer ratio (CTR) optocoupler. It has a gallium arsenide infrared LED emitter and silicon
More informationSilicon NPN Phototransistor
Silicon NPN Phototransistor 16758-1 VEMT252X1 DESCRIPTION VEMT25X1 VEMT25X1 series are silicon NPN epitaxial planar phototransistors in a miniature dome lens, clear epoxy package for surface mounting.
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs
TSAL64 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 94 8389 TSAL64 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power molded in a blue-gray plastic
More informationAmbient Light Sensor
TEPT56 Ambient Light Sensor DESCRIPTION 94 839 TEPT56 ambient light sensor is a silicon NPN epitaxial planar phototransistor in a T-1¾ package. It is sensitive to visible light much like the human eye
More informationHigh Performance Schottky Rectifier, 3.0 A
High Performance Schottky Rectifier, 3. A Cathode Anode SMC PRODUCT SUMMARY Package SMC I F(AV) 3. A V R 4 V V F at I F.46 V I RM 3 ma at 25 C T J max. 5 C Diode variation Single die E AS 6. mj FEATURES
More informationOptocoupler, Phototransistor Output, with Base Connection
CNY7 Optocoupler, Phototransistor FEATURES Isolation test voltage 5 V RMS A 6 B Long term stability i79 C NC 5 C E Industry standard dual-in-line package Lead (Pb-free component Component in accordance
More information