bulkhead luminaires EXCLUSIVELY distributed by Available throughout 420 Branches EXCLUSIVELY distributed by Available throughout 420 Branches
2
Bulkhead Luminaires In modern buildings where areas are constantly being modified for alternative uses, it is important that the lighting installed is as flexible and versatile as possible to cope with the changing needs. Bulkhead luminaires are a perfect solution to meet these demands. Whether an area is being used for storage, either interior or exterior, or if you are looking for products to have aesthetic appeal for use in nursing homes or schools, Déluce has the right product for you. Déluce Lighting offers Bulkheads of many styles and lamp and gear configurations. As with all projects and installations, making the right choice is vital. To aid in doing so, listed below is an overview detailing both the different control gear and lamp configurations on offer, along with their respective features and benefits. Making the right choice... Switch Start High Frequency Fluorescent LED Energy Saving 4 4 Reduced Maintenance 4 Glass Free (Food Safe) 4 Vibration Resistant 4 Dimmable 4 optional Emergency 4 4 4 Flicker-Free 4 4 Suitable for use with PIR 4 * 4 * 4 * Reduced lamp life. 4 optional Cost Comparisons between Fluorescent & LED FITTING Switch Start High Frequency Fluorescent LED Wattage of Fittings 28W 28W 12W Circuit Wattage 32W 26W 14W Number of Fittings 100 100 100 Total Wattage used kw 3.2 2.6 1.4 Hours of use per Year 2800 2800 2800 Cost per kw per Hour 0.12 0.12 0.12 TOTAL ANNUAL RUNNING COST FOR 100 FITTINGS 1,075.20 873.60 470.40 COST DIFFERENCE (SAVING) 201.60 604.80 Running MAINTENANCE COSTS OVER 3 YEARS (BASED ON 8.00 / POINT) 3,360.00 2,240.00 224.00 MAINTENANCE COST DIFFERENCE (SAVING) 1,120.00 3,136.00 TOTAL OPERATING COSTS OVER 3 YEARS 6,585.60 4,860.80 1,635.20 TOTAL OPERATING COST SAVINGS (SAVING) OVER 3 YEARS 1,724.80 4,950.40 Savings shown are when compared with the most expensive option of the three shown. 3
20W LED Bulkhead Die-cast aluminium construction, 20W output fitting. Micro sensor and emergency options available. An ideal alternative for 100W GLS and 28W-38W 2D fittings. The combination of die-cast aluminium base, IP65 rating and 50000 hour LED life make this a hard wearing, maintenance-free fitting ideal for normally inaccessible areas. The range also includes fully adjustable microwave sensor and 3 hours emergency options, further expanding the installation options of this versatile luminaire. A perfect solution for stair wells and car parks, where a robust but aesthetically appealing fitting is required. The Microwave Sensor option dims when area is unattended. Can also be adjusted to turn off completely. 2 YR Warranty 100-240V IP 65 Features: 20 Watt 6000K (daylight) LED colour temperature Die-cast aluminium body c/w M20 x 1.5 IP68 Gland Prismatic and opal diffuser options 3 hours emergency option available Microwave sensor option available - Adjustable range (1-8m) ref no. description watts diameter depth finish SENT4LED20R standard fitting 20W 325mm 100mm white Ø315 99 Eliminate up to 10 lamp replacements over life & reduce running costs by up to 80%! SENT4LED20RE3 standard fitting + E3 20W 325mm 100mm white SENT4LED20RS microwave sensor fitting 20W 325mm 100mm white SENT4LED20RSE3 microwave sensor fitting +E3 20W 325mm 100mm white Energy Saving Benefits When comparing 1 x 20W LED Fitting against 1 x 100W Incandescent Fitting 20W LED = 6.72 100W Incandescent = 33.60 SAVING: 26.88 Based on 8 hours a day, 350 days a year @ 0.12/kWhr By using the microwave sensor option, you could save up to a further 50% on your energy bill. 4
12W LED Bulkhead Polycarbonate construction, 12W output fitting. Micro sensor and emergency options available. An ideal alternative for 16W-28W 2D fittings. An evolved version of the original Déluce Sentinel 2 bulkhead. Polycarbonate construction, IP54 rating and 50,000 hour LED featuring a screwless Twist & Lock cover. The range also includes fully adjustable microwave sensor and 3 hours emergency options. The Microwave Sensor option dims when area is unattended. Can also be adjusted to turn off completely. 2 YR Warranty 100-240V IP 54 Features: 12 Watt 6000K (daylight) LED colour temperature Polycarbonate body IP54 rating Screwless Twist & Lock cover 3 hours emergency option available Microwave sensor option available - Adjustable range (1-8m) Standards: IEC/EN60598-1 & IEC/EN60598-2-22 Ø325 100 Eliminate up to 10 lamp replacements over life & reduce running costs by up to 80%! ref no. description watts diameter depth finish SENT2LED12R standard fitting 12W 325mm 100mm white SENT2LED12RE3 standard fitting + E3 12W 325mm 100mm white SENT2LED12RS microwave sensor fitting 12W 325mm 100mm white SENT2LED12RSE3 microwave sensor fitting +E3 12W 325mm 100mm white Energy Saving Benefits When comparing 1 x 12W LED Fitting against 1 x 100W Incandescent Fitting 12W LED = 4.03 100W Incandescent = 33.60 SAVING: 29.57 Based on 8 hours a day, 350 days a year @ 0.12/kWhr By using the microwave sensor option, you could save up to a further 50% on your energy bill. 5
Bulkheads The Sentinel III energy saving bulkhead is available in 2 x 26W compact fluorescent, and 28W 2D options. Supplied with graphite black die-cast aluminium base and polycarbonate diffuser. A perfect solution for exterior lighting in schools and public places. Robust and durable in marine grade LM6 aluminium. IP65 Rated Stainless steel allen cap screws with heli coils Suitable for mounting on flammable surfaces Emergency option available with 28 Watt versions only - just add /E3 to ref no. 240V IP 65 2D CFL PL CFL 130mm Ø335mm max ref no. diffuser colour watts cap SENT3226 Opal White 2 x 26W G24-q3 SENT3282D Opal White 28W GR10 SENT3226BLKG Opal Black Graphite 2 x 26W G24-q3 SENT3282DBLKG Opal Black Graphite 28W GR10 Eliminate up to 5 lamp replacements over life & reduce running costs by up to 70%! Energy Saving Benefits When comparing 1 x 28W 2D Fitting against 1 x 100W Incandescent Fitting 28W 2D = 9.41 100W Incandescent = 33.60 SAVING: 24.19 Based on 8 hours a day, 350 days a year @ 0.12/kWhr 6
Bulkheads The Sentinel II energy saving bulkhead combines functionality and aesthetics, available in 16W, 28W and 38W with optional decorative trims in chrome and brass. 2D IP65 Luminaire Ideal for use in bathrooms Polycarbonate body and diffuser Optional trims available Screw-less Twist & Lock trims Also available as an Emergency version, simply add /E3 to the ref no. 240V IP 65 CFL max ref no. diffuser colour watts cap SENT2BH16WO Opal White 16W GR8 2 Pin SENT2BH28WO Opal White 28W GR10 4 Pin SENT2BH38WO Opal White 38W GR10 4 Pin B Eliminate up to 5 lamp replacements over life & reduce running costs by up to 70%! A A B SENT2BH16WO Ø265mm 90mm SENT2BH28WO Ø325mm 100mm decorative bezel trims SENT2BH38WO Ø325mm 100mm ref no. SENT2SCB SENT2SBB SENT2LCB SENT2LBB description Chrome Bezel - Small (to fit 16W model) Brass Bezel - Small (to fit 16W model) Chrome Bezel - Large (to fit 28W/38W model) Brass Bezel - Large (to fit 28W/38W model) SENT2LBB SENTLCB Energy Saving Benefits When comparing 1 x 28W 2D Fitting against 1 x 100W Incandescent Fitting 28W 2D = 9.41 100W Incandescent = 33.60 SAVING: 24.19 Based on 8 hours a day, 350 days a year @ 0.12/kWhr 7
Euro Low Energy Bulkheads The Déluce Euro IP55 Bulkhead is ideal for both indoor and outdoor applications. A more decorative option to standard Sentinal Bulkheads, this luminaire is perfect for internal applications such as waiting rooms and reception areas. The Euro with its slimline profile and UV stabilised visor is available in both 16W and 28W versions with either a frosted or opal visor. The range comes complete with low energy lamp. Emergency versions are available on request, simply add E3 to the ref no. 240V IP 55 CFL ref no. description colour EURO2D16/WH 2D 16W fitting c/w prismatic diffuser White EURO2D16OP/WH As above c/w opal diffuser White EURO2D28/WH 2D 28W fitting c/w prismatic diffuser White EURO2D28OP/WH As above c/w opal diffuser White 335 110 28W DIMENSIONS Eliminate up to 5 lamp replacements over life & reduce running costs by up to 70%! EURO2D16OP/WH 270 95 16W DIMENSIONS EURO2D16/WH Energy Saving Benefits When comparing 1 x 28W 2D Fitting against 1 x 100W Incandescent Fitting 28W 2D = 9.41 100W Incandescent = 33.60 SAVING: 24.19 Based on 8 hours a day, 350 days a year @ 0.12/kWhr 8
Bulkheads HIGH FREQUENCY The range consists of 16W, 28W and 38W and has the option of black or white base with prismatic or opal diffuser. The luminaire has a fused terminal block and gear tray safety cord. Also available as an Emergency version, simply add /E3 to the ref no. (Note: 16W emergency supplied in 28W body). Ideal for all storage and communal areas, toilets and small kitchens where access is no issue. sentinel - round sentinel - square 240V CFL IP 65 240V IP 65 CFL max ref no. diffuser colour watts cap SENTBH16BP/HF Prismatic Black 16W GR8 2 Pin SENTBH16WP/HF Prismatic White 16W GR8 2 Pin SENTBH16BOP/HF Opal Black 16W GR8 2 Pin SENTBH16WOP/HF Opal White 16W GR8 2 Pin SENTBH28BP/HF Prismatic Black 28W GR10 4 Pin SENTBH28WP/HF Prismatic White 28W GR10 4 Pin SENTBH28BOP/HF Opal Black 28W GR10 4 Pin SENTBH28WOP/HF Opal White 28W GR10 4 Pin SENTBH38BP/HF Prismatic Black 38W GR10 4 Pin SENTBH38WP/HF Prismatic White 38W GR10 4 Pin SENTBH38BOP/HF Opal Black 38W GR10 4 Pin SENTBH38WOP/HF Opal White 38W GR10 4 Pin max ref no. diffuser colour watts cap SENTSBH16BP/HF Prismatic Black 16W GR8 2 Pin SENTSBH16WP/HF Prismatic White 16W GR8 2 Pin SENTSBH16BOP/HF Opal Black 16W GR8 2 Pin SENTSBH16WOP/HF Opal White 16W GR8 2 Pin SENTSBH28BP/HF Prismatic Black 28W GR10 4 Pin SENTSBH28WP/HF Prismatic White 28W GR10 4 Pin SENTSBH28BOP/HF Opal Black 28W GR10 4 Pin SENTSBH28WOP/HF Opal White 28W GR10 4 Pin SENTSBH38BP/HF Prismatic Black 38W GR10 4 Pin SENTSBH38WP/HF Prismatic White 38W GR10 4 Pin SENTSBH38BOP Opal Black 38W GR10 4 Pin SENTSBH38WOP Opal White 38W GR10 4 Pin A A B 16W VERSION 80mm Ø200mm Energy Saving Benefits A B 28W VERSION 80mm Ø284mm 38W VERSION 80mm Ø284mm A B C 16W VERSION 190 190 90 C 28W VERSION 250 250 90 When comparing 1 x 28W 2D Fitting against 1 x 100W Incandescent Fitting 28W 2D = 9.41 100W Incandescent = 33.60 SAVING: 24.19 Based on 8 hours a day, 350 days a year @ 0.12/kWhr B 38W VERSION 250 250 90 9
LED Emergency Bulkheads Eliminate lamp replacement costs and recycling with the new range of Déluce Emergency LED bulkheads. Massively reducing maintenance costs, these long life, energy saving units improve all aspects of standard emergency bulkheads, including battery life and operation. 2 YR Warranty 106 240V IP 65 76 Features: IP65 rated Maintained operation 76 106 105 348 135 80 90 348 340 370 115 135 ref LED strip wattage lumen 90 DL8LEDEM/BH Single 8W 170 DLEMLED8 Single 8W 95 370 Eliminate up to 10 lamp replacements over life & reduce maintenance costs 10
240V Bulkhead Luminaires IP65 POLYCARBONATE BULKHEADS Manufactured from UV stabilised, corrosion resistant, high impact polycarbonate. Ideal for garage lighting, patio s, under eaves and perimeter lighting. Suitable for indoor and outdoor use. Lamp not included. IP65 ALUMINIUM BULKHEADS Rectangular IP65 bulkhead suitable both for indoor and outdoor use. Base manufactured from epoxy powder coated high pressure die-cast aluminium with UV stabilised vandal proof polycarbonate prismatic diffuser. Lamp not included. 240V 240V IP 65 IP 65 GLS GLS PL9 ref no. description ref no. description MVL100BCT 100W max GLS, IP65 bulkhead c/w BC lampholder. Black body prismatic lens BB100 100W max GLS, IP65 bulkhead c/w BC lampholder - clear lens MVL100BOT MVL100BRT As above but black body opal lens As above but black body red lens BB100R BB1002PL9 100W max GLS, IP65 bulkhead c/w BC lampholder - red lens 100W max 2 x PL9, IP65 bulkhead c/w PL9 lampholder - clear lens 240 240 130 115 113 116 11
Lighting Design Service Déluce Lighting s design team offer a full lighting design service and we are dedicated to delivering professional designs and presentations individually tailored to meet customer s requirements. Site surveys are available and customer visits can also be arranged. Speak to your local CEFCO representative or contact Déluce Lighting direct for more information. Images shown are examples of recent projects. For further information on our lighting design service, contact the dedicated Déluce Team on 01302 769966 NEW! Déluce LED Lighting catalogue For your copy, contact our Sales Team on: 01302 769996 Unit 2, Railway Court, Ten Pound Walk, Doncaster, South Yorkshire, DN4 5HX. Sales: +44 (0) 1302 769996 Technical: +44 (0) 1302 769966 Fax: +44 (0) 1302 769125 www.delucelighting.com DEL0295/FEB2013